DC62-00223A Washer Center Tub Seal – Replacement for Samsung Washers
Product Overview
The Center Tub Seal is a replacement part compatible with Samsung washers. This seal is located on the center tub assembly and provides a watertight barrier between the inner and outer tubs. It prevents water from leaking out during the wash cycle.
Fits Specific Samsung Washer Models.
Replaces Part Numbers
This seal replaces DC62-00223A, AP4211943, PS4208713.
Designed to match the original dimensions and performance of the factory part.
Compatible Brands
Compatible with Samsung front-load washer models, Fits various models that require a shaft-to-tub seal of this type.
Fixes the Following Issues
Water leaking from under the washer
Noisy spin cycle due to worn seal
Mold or mildew forming near tub bearing
Internal water damage from leaking shaft area
Why Buy from Parts‑O‑Matic
Reliable aftermarket quality
Fast and free U.S. shipping
Helps extend washer lifespan and prevent damage
Trusted by repair professionals and homeowners
WD08X23477 Genuine OEM GE Dishwasher Tub Seal Gasket
The WD08X23477 is a genuine GE OEM tub seal gasket designed specifically for GE dishwashers with a stainless steel tub. This gasket runs around the tub opening and creates the seal that keeps wash water contained inside the tub during the cycle rather than leaking out around the edges where the tub meets the door and surrounding cabinet structure.
Over time, this seal can flatten, harden, or develop gaps from years of heat and moisture exposure, which lets water escape past the seal instead of staying inside the tub. A worn or damaged gasket typically shows up as water leaking from underneath or around the front of the dishwasher during a cycle, dampness or pooling near the base of the unit, or visible flattening, cracking, or separation in the seal material itself. It directly replaces AP6041570 and PS11774413.
Quick Answer
The WD08X23477 Genuine OEM GE Dishwasher Tub Seal Gasket fixes GE dishwashers with a stainless steel tub that are leaking water from around the tub opening during a cycle. Replaces AP6041570, PS11774413. This gasket is specific to stainless steel tub models — it is not the plastic tub/door gasket used on other GE dishwasher designs, such as WD08X21894 or WD08X23476.
Common Problems This Part Fixes
Water leaking from underneath or around the front of the dishwasher during a cycle
Dampness or pooling near the base of the dishwasher after running
Visible flattening, hardening, or cracking of the seal around the tub opening
Gaps or separation in the gasket where it meets the tub frame
Leak that appears intermittently, worse on longer or hotter cycles
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher tub seal gasket directly replaces the following OEM and cross-reference part numbers:
WD08X23477, WD08X22095, WD08X20675, 4466531, WD08X20591, AGE24098, AP6041570, EAP11774413, PD00052582, PS11774413
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This tub seal gasket is compatible with select GE dishwashers equipped with a stainless steel tub, and also fits select Hotpoint, Haier, Monogram, and Café dishwashers built on the same GE platform.
Note — stainless steel tub only, and verify fit carefully: This gasket is designed specifically for GE's stainless steel tub design and is a different part from the gaskets used on plastic tub GE dishwashers (such as WD08X21894 or WD08X23476). Additionally, this seal has a documented fitment sensitivity — at least one customer has reported that on their unit, the older original seal had roughly 2 extra inches of material at the bottom that this replacement did not match, resulting in a persistent minor leak even after installation. Confirm your dishwasher has a stainless steel tub and verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine GE OEM part — factory-specified for stainless steel tub dishwashers
Seals the tub opening to keep wash water contained during the cycle
Resolves "water leaking from the front or underneath," "dampness near the base," and "flattened or cracked seal" symptoms
Durable material designed to withstand repeated high-humidity, high-temperature cycles
Direct drop-in replacement — fits the original tub opening groove
Replaces AP6041570 and PS11774413
Compatible with GE, Hotpoint, Haier, Monogram, and Café stainless steel tub dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WD08X23477
Part Type
Dishwasher Tub Seal Gasket
Condition
Genuine OEM
Brand
GE
Application
Stainless Steel Tub Dishwashers
Function
Seals the tub opening to prevent water leaks during wash cycles
Quantity
1 tub seal gasket
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Dishwasher And Shut Off Water Before Starting — Verify Seal Length Against Your Original Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Access to the tub opening seal is typically from the front of the unit with the door open, though some models may require removing the door or surrounding trim to fully access the gasket channel. Before removing the old seal, take note of its full length and how it seats into the groove around the tub opening — some customers have found the replacement seal shorter than the original at one section, so compare the two side by side before discarding the old one. Carefully pull the old gasket free from its retaining groove, working around the full perimeter. Press the new WD08X23477 gasket into the same groove, working around the full perimeter and ensuring it seats evenly with no twists, gaps, or areas where it's pulled too tight. Run your fingers along the full seal after installation to confirm even, consistent contact with no visible gaps. Restore water and power, then run a test cycle and check underneath and around the front of the unit for any signs of leaking. Tools needed: flat-blade screwdriver (model-dependent access), work gloves.
Frequently Asked Questions
How do I know if my dishwasher has a stainless steel tub or a plastic tub?
Open the dishwasher door and look at the interior tub walls — a stainless steel tub has a visible metallic finish, while a plastic tub is typically a solid plastic color (often white, gray, or black) with no metallic sheen. This gasket is designed specifically for the stainless steel tub design; plastic tub models use a different gasket. If you're not sure, check your model number against your appliance's documentation or contact our support team.
I installed the new seal but I'm still seeing a small leak. What should I check?
This has been reported by at least one customer, who found their original seal had extra material at the bottom that this replacement didn't fully match, resulting in a persistent minor leak. Before assuming the gasket itself is faulty, run your fingers around the entire seal after installation to check for any spot where it isn't making even, firm contact — pay particular attention to the bottom section. If a specific area isn't sealing, it may need to be pressed more firmly into its groove, or in rare cases, your particular tub design may require a different seal than expected. Contact our support team with your model number if the leak persists after a careful reinstall.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original material, profile, and groove fit of the tub seal gasket originally installed in your stainless steel tub dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine Whirlpool OEM Part
Whirlpool WP91939 Washer Genuine OEM Upper Transmission Shaft Seal
Factory OEM upper transmission shaft/oil seal for select Whirlpool-built direct-drive washers.
Product Overview
The Whirlpool WP91939 Upper Transmission Shaft Seal is a Genuine OEM washer seal installed at the top of the transmission shaft where the shaft enters the tub area.
It acts as a barrier to help prevent wash water from entering the transmission/gearcase assembly. A worn or damaged seal can contribute to water leakage around the transmission shaft area.
Quick Answer
WP91939 is the Genuine Whirlpool OEM upper transmission shaft seal, also commonly described as an oil seal or transmission shaft seal. It replaces earlier numbers including 91939, 17248, 18918, 92939, and 99835.
Common Problems This Part May Fix
Water leaking around the transmission shaft
Moisture reaching the transmission/gearcase area
Visible deterioration of the upper shaft seal
Water pooling beneath a direct-drive washer
Seal replacement during transmission or centerpost service
Replaces and Cross-References
WP91939, 91939, 17248, 18918, 3154, 92939, 99835, J27-501, LP632, AP6013637, EAP11746864, AWP48904, PD00005395, PS11746864.
Cross-reference numbers are supplied for identification. Always verify the complete appliance model number before ordering.
Compatibility
Used on select Whirlpool-built direct-drive washers sold under Whirlpool, Kenmore, Estate, Roper, KitchenAid, Crosley, and Inglis brands. Confirmed model examples include:
CAE2792AW0
ETW4400WQ1
RAL5144BQ1
110.15942401
110.22912100
110.24922202
110.92587410
110.72785720
Important: This is only a partial compatibility list. Whirlpool has used several different seals in similar-looking washers. Verify the complete model number and original part number before purchase.
Key Features
Genuine Whirlpool OEM replacement part
Upper transmission shaft/oil seal
Helps keep wash water out of the transmission
For select Whirlpool-built direct-drive washers
Factory replacement for multiple earlier seal numbers
Product Specifications
Manufacturer Part Number
WP91939
Brand
Whirlpool
Part Type
Upper Transmission Shaft Seal / Oil Seal
Condition
New
Part Quality
Genuine OEM
Approx. Diameter
1 in.
Approx. Height
1/2 in.
Application
Washer transmission shaft sealing
Package Quantity
1 Seal
Installation Notes
Unplug the washer and shut off both water-supply valves before service.
Follow the appliance service procedure to access the transmission/shaft area.
Remove the old seal carefully without damaging the shaft or surrounding sealing surface.
Clean the shaft and seal seat before installing the new seal.
Install the replacement seal squarely and to the same position/orientation as the original.
Inspect nearby tub, centerpost, spin-shaft, and transmission seals while the washer is disassembled.
Service note: This repair can require substantial washer disassembly. If there is corrosion, shaft wear, transmission oil leakage, or centerpost damage, additional parts may be required.
Frequently Asked Questions
Is WP91939 a Genuine Whirlpool OEM part?
Yes. WP91939 is manufactured by Whirlpool as an Original Equipment Manufacturer replacement seal.
What does the WP91939 seal do?
It seals around the upper transmission shaft to help prevent wash water from entering the transmission/gearcase area.
Does WP91939 replace 91939?
Yes. WP91939 is the current Whirlpool replacement for original part number 91939 and several earlier numbers.
Is WP91939 the same as WP8577376?
No. They are different seals used at different locations in the washer sealing system. Order by the complete washer model number and required seal position.
Shop With Confidence
Verify your complete washer model number before ordering. Genuine OEM WP91939 is designed for specified Whirlpool-built washer applications.
Genuine Whirlpool OEM Upper Transmission Seal Direct-Drive Washer Applications Compatibility Support
Genuine Whirlpool OEM
Whirlpool WP8577376 Washer Genuine OEM Transmission Shaft Seal
Factory replacement transmission stem / agitator shaft seal for select Whirlpool-built top-load washers.
Product Overview
WP8577376 is a Genuine Whirlpool OEM washer shaft seal. Whirlpool describes it as a washing machine transmission stem seal, while Sears identifies it as an agitator shaft seal.
The seal helps prevent wash water from leaking between the tub mounting stem and the agitator drive shaft, protecting the transmission/drive area from moisture.
Quick Answer
WP8577376 is the current Genuine Whirlpool OEM replacement for several older washer shaft and center-post seals. It is commonly used on older Whirlpool-built direct-drive top-load washers.
Common Problems This Part May Fix
Water leaking around the agitator or center-post area
Moisture reaching the transmission or drive system
Worn, cracked, hardened, or missing shaft seal
Leak discovered during tub or transmission service
Replaces and Cross-References
WP8577376, WP91938, 8577376, 91938, 1181094, 356934, 356934BULK, 356934D, 99404, J27-500, J27-661, LP630, LP631, AP6013521, AWP49388, PD00005095, PS11746747
Cross-reference numbers are provided for identification. Always verify the complete appliance model number before ordering.
Compatibility
Fits select Whirlpool-built washers sold under Whirlpool, Kenmore, KitchenAid, Roper, Estate, Crosley, Admiral, Amana, Magic Chef, Maytag and related brands. Compatible model examples include:
LSR7233DZ1
LSQ8243HQ0
LSQ8512KQ0
LSQ8543JQ0
LSQ9110PW3
LSQ9544KQ0
LSQ9549LG1
110.10502990
110.16602690
110.73875800
110.71770610
110.73775200
Important: This is only a partial compatibility list. Verify the full washer model number and original seal number before purchase.
Key Features
Genuine Whirlpool OEM replacement part
Transmission stem / agitator drive shaft sealing function
Helps prevent water intrusion into the drive area
Updated replacement for multiple older shaft-seal numbers
Designed for select Whirlpool-built top-load washers
Product Specifications
Manufacturer Part Number
WP8577376
Brand
Whirlpool
Part Type
Transmission Stem / Agitator Shaft Seal
Condition
New
Part Quality
Genuine OEM
Application
Washer Tub / Transmission Shaft Sealing
Package Quantity
1 Shaft Seal
Installation Notes
Unplug the washer and shut off both water-supply valves before service.
Drain any remaining water and follow the appliance service procedure for tub/drive-system access.
Remove the old shaft seal without damaging the mounting surface or drive shaft.
Clean the sealing surface before installing the replacement.
Install the new seal in the correct orientation and reassemble the washer.
Run a test cycle and inspect carefully for leaks.
Service note: A leak in this area can also involve worn tub seals, a damaged mounting stem, corrosion, or transmission/shaft wear. Inspect related components while the washer is disassembled.
Frequently Asked Questions
Is WP8577376 a Genuine Whirlpool OEM part?
Yes. WP8577376 is a Genuine Whirlpool OEM replacement shaft seal.
What does this seal do?
It helps prevent water from leaking between the tub mounting stem and agitator drive shaft.
Does WP8577376 replace 8577376 and 91938?
Yes. Those are among the earlier part numbers superseded by WP8577376.
Is this the complete transmission?
No. This listing is for the shaft seal only. The transmission/gearcase and other seals are not included.
Shop With Confidence
Use your washer's complete model number to confirm fitment before ordering.
Genuine Whirlpool OEM Factory Replacement Compatibility Support Fast U.S. Shipping
Genuine Whirlpool OEM
Whirlpool WP8577374 Washer Genuine OEM Transmission Shaft Seal
Genuine OEM center shaft / basket drive tube seal for select Whirlpool-built top-load washers and laundry centers.
Product Overview
The Whirlpool WP8577374 Washer Transmission Shaft Seal is a genuine OEM sealing component used in the center drive area of compatible washers. It is also described as a center shaft seal or basket drive tube seal.
This seal helps keep wash water from leaking into the basket drive tube / gearcase area. A worn or damaged seal may allow water or dark oily residue to appear around the center shaft area.
Quick Answer
WP8577374 is a Genuine Whirlpool OEM washer center shaft / basket drive tube seal. It replaces original part number 8577374 and is used on many Whirlpool-built direct-drive washers sold under Whirlpool, KitchenAid, Roper, Estate, Maytag, Amana, Admiral, Crosley, and Kenmore brands.
Common Problems This Part May Fix
Water leaking around the center shaft area
Water entering the basket drive tube
Dark or oily-looking residue near the center of the washer
Seal deterioration discovered during transmission or basket-drive service
Preventive replacement during a major centerpost or gearcase repair
Replaces and Cross-References
WP8577374, 8577374, 4438792, AP6013519, AWP49372, PD00045466, PS11746745.
Cross-reference numbers are provided for identification. Always verify the complete washer model number before ordering.
Compatibility
Fits select Whirlpool-built washers and laundry centers. Compatible model examples include:
3RGSC9400SL0
3XLSQ7533JQ4
KAWS850LQ2
CAM2752TQ0
7MMMS0120VM0
110.20522900
WTW5505VQ0
110.28762700
7MWT96540ST2
7MMSE1000TW0
ETW4400WQ1
MGT3800XW3
Important: This is only a partial compatibility list. Confirm your full model number because Whirlpool-built washers can use several different shaft, stem, centerpost, and transmission seals that are not interchangeable.
Key Features
Genuine Whirlpool OEM replacement part
Center shaft / basket drive tube sealing component
Helps prevent wash water from entering the drive tube area
Direct replacement for original part 8577374
Used on many Whirlpool-built direct-drive washer platforms
Product Specifications
Manufacturer Part Number
WP8577374
Brand
Whirlpool
Part Type
Transmission / Center Shaft Seal
Alternate Description
Basket Drive Tube Seal / Centerpost Seal
Condition
New
Part Quality
Genuine OEM
Replaces
8577374
Application
Washer Center Drive / Basket Drive Tube
Package Quantity
1 Seal
Installation Notes
Unplug the washer and shut off the water supply before service.
Disassembly of the basket, drive components, or gearcase area may be required depending on model.
Remove the old seal carefully to avoid damaging the sealing surface or drive tube.
Clean and inspect the shaft/tube sealing surface before installing the new seal.
Install the seal squarely and to the correct depth following the model-specific service procedure.
Inspect related tub, centerpost, and transmission seals while the washer is disassembled.
Service note: WP8577374 is not the same part as WP8577376 or WP91939. These seals are used in different locations. Verify the part number required for your exact washer before installation.
Frequently Asked Questions
Is WP8577374 a Genuine Whirlpool OEM part?
Yes. WP8577374 is a genuine Whirlpool replacement seal.
What does this seal do?
It helps prevent wash water from leaking into the basket drive tube / center drive area of the washer.
Does WP8577374 replace 8577374?
Yes. WP8577374 is the current Whirlpool replacement for original part number 8577374.
Is this the same as WP8577376 or WP91939?
No. Although all are washer shaft/sealing components, they serve different locations and should not be substituted unless your model-specific parts documentation calls for that number.
Shop With Confidence
Order by complete model number whenever possible. Correct fit is especially important for washer centerpost and transmission sealing components.
Genuine Whirlpool OEM Direct Replacement Model Verification Recommended Compatibility Support
WD08X27458 Dishwasher Genuine OEM Floating Seal – Compatible with GE Dishwashers
Product Description
Prevent leaks and ensure reliable dishwasher operation with the WD08X27458 Dishwasher Genuine OEM Floating Seal. This factory-approved seal fits beneath the float assembly, helping regulate water levels and keeping water contained inside the tub. A worn or damaged seal can cause leaks or improper filling. Replacing it with this genuine OEM part restores proper performance and protects your kitchen from water damage.
Replaces Part Numbers
WD08X27458, WD08X25471, AP7018540, EAP16554611, PD00072539, PS16554611.
Compatibility
This floating seal is compatible with select GE dishwashers.
Example compatible models include (but are not limited to): GE GDF530PSM0SS, GE GDT695SMJ0ES, and GE PDT825SSJ0SS.
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Genuine OEM Part – Factory-approved floating seal for GE dishwashers
💧 Leak Protection – Keeps water contained in the dishwasher tub
💰 Cost-Effective Repair – Prevents costly kitchen water damage
🛠️ Easy Installation – Installs in minutes under the float assembly
🛡️ Fixes Common Issues – Resolves dishwasher leaks and incorrect filling
📐 Product Specification
Part Number: WD08X27458
Component Type: Dishwasher Floating Seal
Material: Durable rubber construction
Mounting: Direct-fit replacement under float assembly
Operating Conditions: Designed for residential dishwasher use
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: None or Phillips screwdriver (depending on model)
⚠️ Safety First: Disconnect power and water supply before servicing the dishwasher.
Steps:
Disconnect dishwasher from power and water supply.
Open the dishwasher door and locate the float assembly.
Lift float to access the old seal beneath it.
Remove worn seal and place new WD08X27458 floating seal in position.
Ensure secure fit, reinstall float, and close door.
Restore power and water, then run a short cycle to test.
⏱️ Time Required: 10 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Stop leaks and protect your kitchen — Add to Cart Now for a genuine, factory-approved repair!
WP8182119 Washer Genuine OEM Door Boot Gasket
Genuine OEM washer door boot gasket designed to create a watertight seal between the washer tub and front door assembly.
✓ Genuine OEM Part ✓ Replaces WP8182119 ✓ Compatibility Support
Product Description
The Genuine OEM WP8182119 Washer Door Boot Gasket helps create a secure watertight seal between the washer tub and front door assembly. A torn or worn gasket can cause leaks, mold buildup, or poor door sealing performance.
Replacing the washer door boot gasket can help restore proper sealing and reduce water leaks during operation.
Quick Answer
If your washer is leaking from the front door area or the gasket is torn, damaged, or moldy, the WP8182119 washer door boot gasket may need replacement.
⚠️ Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Front-load washer water leaks
Torn or damaged door gasket
Mold or mildew buildup
Poor washer door sealing
Water leaking around washer door
Replaces part Number
WP8182119, 8182119, W10003800, AWP825300, AP6011758, EAP11744957, PD00002449, PS11744957.
Compatibility
This part fits select Whirlpool, Kenmore, Maytag, and compatible front-load washer models using part number WP8182119.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Genuine OEM washer door boot gasket
Helps prevent washer door leaks
Supports proper watertight sealing
Designed for compatible washer models
Durable OEM replacement component
Product Specifications
Brand
Whirlpool
Part Type
Washer Door Boot Gasket
Primary Part Number
WP8182119
Compatible Appliance Type
Washer
Condition
Genuine OEM New
Installation
Disconnect power before installation. Ensure gasket is aligned properly to prevent leaks.
Troubleshooting Guide
⚠️ Disconnect power before servicing the washer.
Inspect the gasket for tears or mold buildup.
Check door alignment and sealing condition.
Test washer operation after installation.
Replace the gasket if leaks continue around the door area.
When Should You Replace This Part?
Replace the washer door boot gasket if the washer leaks from the front door area or the gasket becomes torn, damaged, or heavily worn.
Shop With Confidence
We are a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse.
✓ Fast Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO MDS47123602 Washer Door Boot Gasket – Compatible with LG Front-Load Washers
Product Description
Stop leaks and restore proper sealing with the XPARTCO MDS47123602 Washer Door Boot Gasket. This high-quality aftermarket replacement forms a watertight seal between the washer door and tub, preventing water from leaking during wash and spin cycles. A worn, torn, or mold-damaged gasket can lead to leaks, odors, or excessive vibration. Replacing it with this durable XPARTCO gasket provides long-lasting protection and reliable washer performance.
Replaces Part Numbers
MDS47123602, MDS64237201, MDS64237202, MDS47123612, EAP3535210, PD00028934, AH3535210, EA3535210, AP5218575, PS3535210.
Compatibility
This replacement door boot gasket fits select LG front-load washers.
Example compatible models include (but are not limited to):LG WM2650HWA, WM3470HVA, WM3570HWA, WM8000HVA, and WM3997HWA.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM fit, thickness, and sealing performance
💧 Leak-Proof Design – Forms a tight seal to prevent water escaping from the washer door
🌿 Mold-Resistant Material – High-grade rubber reduces mildew and odor buildup
🛠️ Durable Construction – Built to withstand heat, detergent, and high-spin vibration
🛡️ Fixes Common Issues – Solves leaks, mold/mildew odor, door seal tears, or water pooling
📐 Product Specification
Part Number: MDS47123602
Component Type: Washer Door Boot Gasket (Door Seal)
Material: High-strength, mold-resistant rubber
Color: Gray (standard for LG models)
Mounting: Installed between front tub and door frame using clamps
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, spring clamp tool (recommended), pliers
⚠️ Safety First: Always unplug the washer before installation to prevent electrical shock.
Steps:
Remove the washer top and front panel for access.
Release the outer retaining spring clamp and remove the old gasket edge.
Detach the inner clamp from the tub and remove the old gasket completely.
Align and install the new XPARTCO MDS47123602 gasket around the tub opening.
Reinstall inner clamp, then secure the outer clamp around the door frame.
Reassemble the washer and perform a quick rinse cycle to test for leaks.
⏱️ Time Required: 30–45 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Stop washer leaks the right way — Add to Cart Now for a durable, budget-friendly replacement!
XPARTCO W10542314 Dishwasher Door Gasket and Strike Kit
The XPARTCO W10542314 is an aftermarket replacement dishwasher door gasket and strike kit for select Whirlpool-built dishwashers, including Kenmore, KitchenAid, Maytag, Amana and other brands, replacing Whirlpool part W10542314. The gasket, also called the door seal or tub gasket, creates a watertight seal around the door, and the strike holds the door latch when the door is closed. When either wears out, the dishwasher may leak, the door may not latch, or it may not close properly.
This kit replaces several earlier Whirlpool gasket numbers, so the new kit may be listed under a different number than your old gasket. Check your model number before ordering, as similar gaskets can differ in size and shape.
Quick Answer
The XPARTCO W10542314 Door Gasket and Strike Kit replaces the door gasket and latch strike on a compatible Whirlpool-built dishwasher. Replaces W10350162, W10284090, W10300589 and 8268888. Classic symptoms: water leaking from the door, the door won't close, or the latch fails.
Common Problems This Part Fixes
Water leaking from the dishwasher door
Door won't close
Door latch failure
Torn, worn or gapped door gasket
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This door gasket and strike kit directly replaces the following part numbers:
W10542314, 2409202, 8268888, W10284090, W10300589, W10350162, W10542314VP, AP5650274, AWP40727, EAP5136129, PD00002456, PS5136129
If your old gasket shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This kit is listed for Whirlpool, Kenmore, Kenmore Elite, KitchenAid, Maytag, Amana, Magic Chef, Crosley, Inglis, Roper and Estate dishwashers, including these examples:
Whirlpool MDB6769AWW0, MDB6709AWQ2, MDB4709AWW0, RUD8000RQ0
KitchenAid KUDS01DJSB0
Kenmore 66213032K112, 66213273K112, 66513679K601
Note: The models above are a small sample. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Aftermarket replacement for the Whirlpool W10542314 gasket and strike kit
Includes a door gasket and a latch strike
Creates a watertight seal around the dishwasher door
Helps the door latch securely when closed
Replaces several earlier Whirlpool gasket numbers
Product Specifications
Part Number
XPW10542314
OEM Part Number
W10542314
Part Type
Dishwasher Door Gasket and Strike Kit
Condition
Aftermarket Replacement
Kit Includes
Door Gasket, Latch Strike
Application
Select Whirlpool, Kenmore, KitchenAid & Maytag Dishwashers
Installation Notes
⚠️ Disconnect Power Before Installing Unplug the dishwasher or shut off its circuit breaker before you begin, and wear work gloves. Remove the old gasket and clean the groove it sat in. Seat the new gasket evenly all the way around the door, without twists, and replace the latch strike. Close the door, run a cycle, and check for leaks.
Frequently Asked Questions
My dishwasher leaks from the door. Is this the part I need?
A torn, worn or poorly seated gasket, or a failing latch strike, is a common cause of door leaks. Check the gasket for tears, gaps or cuts first. Other problems can cause the same symptoms, so confirm the gasket is the source before replacing it.
What is in this kit?
It includes a door gasket and a replacement latch strike. Retailers do not itemize it further.
Is this an OEM or aftermarket part?
This is an aftermarket replacement from XPARTCO, made to replace Whirlpool part W10542314. If you specifically need a genuine Whirlpool part, contact our support team.
Will this fit my dishwasher?
It is listed for many Whirlpool-built dishwashers, but the model list above is only a sample, and similar gaskets can differ in size and shape. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
AAS73229402 Genuine OEM LG Washer Tub to Pump Hose
The AAS73229402 is a Genuine OEM LG replacement tub-to-pump hose (also called a drain pump bellows assembly) compatible with a wide range of LG and Kenmore washing machines. This hose carries water from the outer tub to the drain pump, allowing the used wash and rinse water to properly empty from the tub during the drain cycle. It features flexible bellows that let the hose expand and contract as the tub moves during operation, while forming a watertight connection between the tub and the pump. When this hose cracks, splits, or develops porous areas, water leaks out during draining — typically showing up as a puddle under the washer.
Made of durable rubber engineered to resist wear through years of flexing and water exposure. As a Genuine OEM part manufactured by LG to factory specifications, the AAS73229402 directly replaces AP6973533, AGM76891101, AHA75673401, and AEM74073303. This is one of those repairs where using the exact OEM hose matters — the correct fit and internal diameter ensure proper drainage and a leak-free seal, which unverified substitute hoses can't always guarantee. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The AAS73229402 Genuine OEM LG Washer Tub to Pump Hose fixes LG and Kenmore washers that leak water under the machine during or after draining, don't fully drain the tub, leave standing water, or develop mold in the pump housing. Tub-to-pump hose / drain pump bellows assembly with flexible bellows — carries water from the outer tub to the drain pump. Genuine OEM. Replaces AP6973533, AGM76891101, AHA75673401, AEM74073303. Compatible with LG front-load and top-load washers plus select Kenmore models. Use the exact OEM hose for correct fit and diameter.
Common Problems This Part Fixes
Water leaking or puddling under the washer during or after the drain cycle
Washer not fully draining — water left in the tub after the cycle
Excess water left in the tub requiring additional emptying
Drips or leaks from the tub-to-pump connection
Standing water or mold growth inside the pump housing
Hose visibly cracked, split, or showing porous/worn areas
Hose no longer staying securely attached to the tub or pump
Musty/moldy smell from water trapped by a leaking or sagging hose
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This tub-to-pump hose directly replaces the following OEM and cross-reference part numbers:
AAS73229402, AAS73229405, AAS73229403, AGM76891101, AP6973533, PS12738715, ALG52189, PD00071151.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility. For a proper leak-free seal, use the exact OEM hose rather than an unverified substitute — the correct fit and internal diameter matter.
Compatibility
This tub-to-pump hose is compatible with select LG and Kenmore washing machines, including front-load and top-load models:
LG front-load washers — select WM-series models
LG top-load washers — select WT-series models (including WT7305CV and related)
LG washers using the AAS73229402 tub-to-pump bellows hose (verify with your parts diagram)
Kenmore / Sears washers — select LG-built models
Because LG uses several different tub-to-pump and drain hoses across its washer lineup, always verify your appliance model number before ordering to confirm the AAS73229402 is the correct hose for your machine. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by LG to factory specifications — guaranteed fit and performance
Tub-to-pump hose (drain pump bellows assembly) — carries water from the outer tub to the drain pump for proper draining
Flexible bellows design — expands and contracts as the tub moves during operation while keeping a watertight seal
Resolves "leaking under the washer," "won't fully drain," "standing water," and "mold in pump housing" symptoms when caused by a failed hose
Durable rubber construction engineered to resist cracking, splitting, and porosity over years of use
Correct OEM fit and internal diameter for proper drainage and a leak-free seal
Replaces AP6973533, AGM76891101, AHA75673401, and AEM74073303
Compatible with LG front-load (WM-series) and top-load (WT-series) washers, plus select Kenmore LG-built models
Genuine OEM — the exact part sourced from the manufacturer
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
AAS73229402
Part Type
Washer Tub-to-Pump Hose (Drain Pump Bellows Assembly)
Condition
Genuine OEM
Application
Front-Load & Top-Load Washing Machines (LG platform)
Function
Carries water from the outer tub to the drain pump
Design
Flexible bellows (expands/contracts with tub movement)
Material
Rubber
Location
Between the outer tub and the drain pump
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Work Gloves — Drain the Tub First Unplug the washer and shut off the water supply before beginning. Wear work gloves to protect your hands. Drain any excess water from the washer before starting — the tub and hose still hold water that will spill out when you disconnect the hose, so have towels and a shallow pan ready. Pull the washer away from the wall to access the panels (on many models you can leave the water supply hoses connected and just unplug the electrical cord). The hose is accessed by removing the rear panel: remove the screws (often 4) securing the rear panel to the back of the washer and set the panel aside. On some front-load models, the top panel is removed instead — remove the top panel bracket screws, slide the top toward the rear, and lift it off. Locate the tub-to-pump hose connecting the outer tub to the drain pump. Photograph the hose routing and clamp positions before disconnecting. Use slip-joint pliers to squeeze and slide back the spring hose clamps at each end of the hose (and loosen any center clamp with a screwdriver). Pull the old hose straight off both connections. Note: on some models the clamp on the pump differs from other nearby hose clamps — mark them so you reinstall each in the right spot. Install the new AAS73229402 hose, seating it fully onto both the tub and pump fittings, and secure the clamps in their original positions using the existing clamps. Make sure the hose is seated all the way on and the clamps are secure — a hose that isn't fully seated will leak and make a large mess. Reinstall the panel, push the washer back into place, restore power and water, and run a rinse/spin cycle to test drainage and check for leaks. Tip: some people find it easier to tip the washer up a few inches on a couple of 2x4s for better access. Tools needed: Phillips screwdriver, slip-joint pliers, towels, shallow pan, work gloves.
Frequently Asked Questions
There's a puddle under my LG washer — is this hose the cause?
It's one of the most common causes, yes. The tub-to-pump hose carries water under pressure from the tub to the drain pump, so when it cracks, splits, or develops a porous spot, water escapes during the drain cycle and puddles under the machine. Before ordering, inspect the hose and its connections: pull the washer out, remove the rear (or top) panel, and look for visible cracks, splits, or wet spots along the hose and at the clamps. Also check the drain pump itself and the other hoses, since a leak can come from several nearby points. If the tub-to-pump hose shows damage or the leak traces to it, this is the correct part. Many people replace the drain pump and hoses together as a "while you're in there" repair.
What's the difference between the tub-to-pump hose and the drain hose?
They're two different hoses. The tub-to-pump hose (this part, AAS73229402) is an internal hose that carries water from the outer tub to the drain pump inside the washer cabinet. The drain hose is the external hose that carries the water from the pump out of the washer to your standpipe, sink, or drain. If your leak is inside the cabinet or under the machine, it's often the internal tub-to-pump hose. If water is leaking where the external hose meets your drain, that's the drain hose. Make sure you're ordering the right one for your symptom.
Can I use an aftermarket substitute hose instead?
We recommend the exact OEM hose. Tub-to-pump hoses have to match the specific fit and internal diameter of your washer's tub and pump fittings to seal properly and drain correctly. Appliance technicians specifically caution against using unverified substitute hoses on LG washers because an incorrect fit or diameter can cause leaks or drainage problems. The AAS73229402 is the genuine OEM part with the correct dimensions for the models it fits, giving you a reliable, leak-free seal. If you're unsure whether this is the right hose for your model, send us your model number and we'll confirm.
My washer won't drain fully and leaves standing water — is it this hose?
It can be, though incomplete draining has a few possible causes. A tub-to-pump hose that has partially collapsed, kinked, or is leaking can reduce the water flow to the pump and leave water behind. But standing water is also commonly caused by a clogged pump, a blocked hose, or a failing drain pump. Inspect the tub-to-pump hose for kinks, sagging, cracks, and blockages first. Also check the drain pump inlet and clean out any debris. If the hose is damaged, replacing it with the AAS73229402 restores proper flow. If the hose is fine, the drain pump or a blockage is the more likely cause.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by LG to factory specifications. It is the exact same tub-to-pump hose (drain pump bellows assembly) installed in compatible LG and Kenmore LG-built washers from the factory — guaranteed fit, materials, and performance, sourced directly from the manufacturer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM W10542314 Dishwasher Door Gasket and Strike Kit
The Genuine OEM Whirlpool W10542314 is a dishwasher door gasket and strike kit for select Whirlpool-built dishwashers, including Kenmore, KitchenAid, Maytag, Amana and other brands. The gasket, also called the door seal or tub gasket, creates a watertight seal around the door, and the strike holds the door latch when the door is closed. When either wears out, the dishwasher may leak, the door may not latch, or it may not close properly.
This is the original Whirlpool part, not an aftermarket equivalent. It replaces several earlier Whirlpool gasket numbers, so the new kit may be listed under a different number than your old gasket. Check your model number before ordering, as similar gaskets can differ in size and shape.
Quick Answer
The Genuine OEM W10542314 Door Gasket and Strike Kit replaces the door gasket and latch strike on a compatible Whirlpool-built dishwasher. Replaces W10350162, W10284090, W10300589 and 8268888. Classic symptoms: water leaking from the door, the door won't close, or the latch fails.
Common Problems This Part Fixes
Water leaking from the dishwasher door
Door won't close
Door latch failure
Torn, worn or gapped door gasket
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This door gasket and strike kit replaces or supersedes the following part numbers:
W10542314 replaces 2409202, 8268888, W10284090, W10300589, W10350162, W10542314VP, AP5650274, AWP40727, EAP5136129, PD00002456, PS5136129
If your old gasket shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This kit is listed for Whirlpool, Kenmore, Kenmore Elite, KitchenAid, Maytag, Amana, Magic Chef, Crosley, Inglis, Roper and Estate dishwashers, including these examples:
Whirlpool MDB6769AWW0, MDB6709AWQ2, MDB4709AWW0, RUD8000RQ0
KitchenAid KUDS01DJSB0
Kenmore 66213032K112, 66213273K112, 66513679K601
Note: The models above are a small sample. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM Whirlpool part, not an aftermarket equivalent
Includes a door gasket and a latch strike
Creates a watertight seal around the dishwasher door
Helps the door latch securely when closed
Replaces several earlier Whirlpool gasket numbers
Product Specifications
Part Number
W10542314
OEM Part Number
W10542314
Part Type
Dishwasher Door Gasket and Strike Kit
Condition
Genuine OEM
Manufacturer
Whirlpool
Kit Includes
Door Gasket, Latch Strike
Application
Select Whirlpool, Kenmore, KitchenAid & Maytag Dishwashers
Installation Notes
⚠️ Disconnect Power Before Installing Unplug the dishwasher or shut off its circuit breaker before you begin, and wear work gloves. Remove the old gasket and clean the groove it sat in. Seat the new gasket evenly all the way around the door, without twists, and replace the latch strike. Close the door, run a cycle, and check for leaks.
Frequently Asked Questions
My dishwasher leaks from the door. Is this the part I need?
A torn, worn or poorly seated gasket, or a failing latch strike, is a common cause of door leaks. Check the gasket for tears, gaps or cuts first. Other problems can cause the same symptoms, so confirm the gasket is the source before replacing it.
What is in this kit?
It includes a door gasket and a replacement latch strike. Retailers do not itemize it further.
Is this an OEM or aftermarket part?
This is a genuine OEM part from Whirlpool, not an aftermarket equivalent.
Will this fit my dishwasher?
It is listed for many Whirlpool-built dishwashers, but the model list above is only a sample, and similar gaskets can differ in size and shape. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
WH23X38617 Genuine OEM GE Washer Drain Pump Filter with Seal
The WH23X38617 is a Genuine OEM GE replacement drain pump filter with seal, compatible with select GE, GE Profile, and GE 2-in-1 Washer/Dryer Combo models. The pump filter sits inside the drain pump housing and traps lint, coins, hair, and small debris before they reach the pump impeller. Keeping this filter clean and intact is essential for proper drainage — a clogged or damaged filter causes slow draining, standing water in the tub, and can strain the drain pump over time.
This genuine OEM part is manufactured by GE to factory specifications and includes both the pump filter and the seal. The seal prevents leaks at the pump clean-out when the filter is installed correctly. The filter body is blue plastic with rubber seal components, measuring approximately 6" L x 3" W x 3" H. It directly replaces part number AP7243923 and installs with a simple counterclockwise removal and clockwise installation — no special tools required.
Quick Answer
The WH23X38617 Genuine OEM GE Washer Drain Pump Filter with Seal fixes GE washers that drain slowly, leave standing water in the tub, or leak near the pump access panel. The filter traps lint and debris to protect the pump impeller. Includes filter and seal. Blue plastic/rubber, approx. 6" L x 3" W x 3" H. Twist-out installation — no tools needed. Compatible with GE, GE Profile, and GE 2-in-1 Washer/Dryer Combo models.
Common Problems This Part Fixes
Washer draining slowly or not draining at all after a wash cycle
Standing water remaining in the drum at the end of a cycle
Water leaking from the pump filter access panel at the front of the washer
Error codes related to drain or pump failure on compatible GE models
Unusual noise from the drain pump caused by debris reaching the impeller
Cracked, stripped, or missing filter cap allowing debris into the pump housing
Damaged or deteriorated seal causing leaks at the filter access port
Replaces Part Numbers
This drain pump filter directly replaces the following part numbers:
WH23X38617, WH23X38617, FIX17874614, AGE1014282, PD00090185, AP7243923, PS17874614.
Contact our support team with your model number if you need help confirming compatibility before ordering.
Compatibility
This drain pump filter is compatible with select washers and laundry centers from the following GE product lines:
GE front-load washers (select models)
GE Profile front-load washers (select models)
GE 2-in-1 Washer/Dryer Combo (select models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by GE to factory specifications — guaranteed fit and performance
Traps lint, coins, hair, and small debris to protect the drain pump impeller from damage
Includes both the pump filter and seal — everything needed for a complete replacement
Seal prevents water leaks at the pump filter access port when the filter is properly installed
Blue plastic and rubber construction — durable and chemical resistant
Dimensions: approximately 6" L x 3" W x 3" H
Twist-out installation — turns counterclockwise to remove, clockwise to install; no special tools required
Should be cleaned regularly (every 1–3 months) and replaced when cracked, stripped, or leaking
Product Specifications
Part Number
WH23X38617
Part Type
Washer Drain Pump Filter with Seal
Condition
Genuine OEM
Application
Front-load washers and 2-in-1 washer/dryer combos
Approximate Dimensions
6" L x 3" W x 3" H
Color
Blue
Material
Plastic / Rubber
Includes
Pump filter and seal
Installation
Twist-out / twist-in — no special tools required
Compatible Brands
GE, GE Profile
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before servicing the drain pump filter. Place towels or a shallow pan beneath the filter access panel to catch residual water — there will always be some water remaining in the pump housing when you remove the filter. Locate the pump filter access panel at the lower front of the washer and open or remove it. Turn the old WH23X38617 filter counterclockwise to loosen and remove it. Clear any debris from the filter housing and wipe the area clean. Install the new filter and seal by inserting it into the housing and turning it clockwise until snug — do not overtighten. Close or reinstall the access panel, restore water supply and power, then run a short cycle to verify proper drainage and confirm there are no leaks at the filter port. Tip: Clean the pump filter every 1–3 months as part of regular washer maintenance to prevent buildup. Tools needed: None for the filter itself; a screwdriver may be needed to open the access panel on some models.
Frequently Asked Questions
What does the drain pump filter do?
The drain pump filter catches lint, coins, hair, buttons, and other small items before they can reach the drain pump impeller. Without the filter, debris can jam or damage the impeller — leading to pump failure, loud grinding noises, or a washer that won't drain. The filter also acts as a cleanout access point so you can periodically remove accumulated debris without disassembling the pump.
How often should I clean or replace the pump filter?
GE recommends cleaning the pump filter every 1–3 months depending on how frequently you run the washer and how much lint your laundry produces. The filter should be replaced rather than just cleaned if it is cracked, stripped at the threads, or if the seal is damaged or missing — a compromised filter or seal will leak water from the access port.
Why is water leaking from the front of my GE washer near the bottom?
A leak at the lower front of the washer near the pump access panel is most often caused by a damaged or deteriorated pump filter seal, a cracked filter body, or a filter that is not fully tightened. Replacing the WH23X38617 pump filter and seal resolves this in most cases. Make sure the new filter is hand-tightened snugly — do not overtighten, as this can crack the housing.
Will there be water when I remove the pump filter?
Yes — there is always residual water in the drain pump housing. Before removing the filter, place towels and a shallow pan or tray directly under the access panel to catch the water. The amount varies depending on how much water remains in the washer after the last cycle. Running a drain-only cycle immediately before removing the filter will minimize the amount of water released.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by GE to factory specifications. It is the exact same pump filter and seal that GE installs in compatible models from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
