XPARTCO W10849499 Dryer Drum Belt
The XPARTCO W10849499 is an aftermarket replacement drum belt for Whirlpool's large-capacity dryer platform. The belt wraps all the way around the outside of the drum, passes around the idler tension pulley, and loops around the drive motor pulley — that belt is the only mechanical connection between the motor and the drum, so when it breaks, the console still lights up, the motor still hums, and the blower still moves air, but the drum sits completely still. Open the door and spin the drum by hand and it will turn freely with no resistance.
This belt measures approximately 97.75 inches long. Belts fail from age and heat: the rubber hardens over years of thermal cycling, the ribs glaze over and begin slipping under a heavy wet load, and eventually the belt cracks through or snaps outright. A worn or seized idler pulley is also a common root cause of premature belt failure, since a pulley that won't turn freely forces the belt to drag continuously against a stationary surface until it shreds. Squealing or chirping at startup, a rhythmic thump timed to drum rotation, fraying at the edges, or black rubber dust in the cabinet are all signs a belt is near the end of its life. As an aftermarket replacement, the W10849499 is built to OEM-equivalent quality standards. It directly replaces AP5989682, 4383705, PS11731121, and W10610882.
Quick Answer
The XPARTCO W10849499 Dryer Drum Belt fixes Whirlpool large-capacity dryers where the motor runs but the drum won't turn, the drum spins freely by hand, or the dryer squeals, chirps, or thumps during operation. Approximately 97.75" long. Replaces AP5989682, 4383705, PS11731121, W10610882. If your belt broke due to a worn idler pulley rather than simple age, replace the pulley (PS334244) at the same time or the new belt will wear out quickly too.
Common Problems This Part Fixes
Dryer runs and hums but the drum does not turn — the classic broken belt symptom
Drum spins freely by hand with no resistance when the door is open
Loud squealing, chirping, or scraping noise from inside the dryer
Rhythmic thumping or slapping noise timed to drum rotation — cracked or split belt
Drum turns slowly, intermittently, or stalls under a heavy wet load — glazed belt slipping
Clothes not drying completely, or drying taking longer than it used to
Broken belt pieces or fragments found inside the drum
Visible cracking, fraying, glazing, or stretching on the old belt
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer drum belt directly replaces the following OEM and cross-reference part numbers:
W10849499, W10610882, AP5989682, 4383705, AWP42591, EAP11731121, OEM17969055, PD00046442, PS11731121
W10610882 was the immediately preceding number for this same belt. If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum belt is compatible with select large-capacity Whirlpool-built dryers across the Whirlpool family of brands, including:
Whirlpool large-capacity electric and gas dryers
Maytag dryers (select Whirlpool-built models)
KitchenAid, Jenn-Air, and Amana dryers (select models)
Magic Chef, Admiral, Norge, Roper, and Inglis dryers (select models)
Select Kenmore and Ikea dryers built on the Whirlpool platform
Verified model numbers include: YWED8500DC, YWED8000DW, YWED8500DW, 7MWGD8000E, and 7MWGD8500E.
Note: Whirlpool uses several different drum belt lengths across its dryer lineup, and this one is approximately 97.75" long — different from the shorter belts used on other Whirlpool-built platforms. Belts of a similar rib profile but a different length are not interchangeable; a belt that's too long or short for your drum will slip, walk off the pulley, or fail to seat properly. Verify your model number, or measure your old belt end to end, before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement drum belt for Whirlpool's large-capacity dryer platform
Approximately 97.75" in length
Wraps around the drum, idler tension pulley, and drive motor pulley to transfer motor rotation to the drum
Resolves "motor runs but drum won't turn," "squealing or chirping," and "drum spins freely by hand" symptoms
Direct drop-in replacement — no cutting, splicing, or modification required
Replaces W10610882, AP5989682, 4383705, and PS11731121
Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Inglis, and Kenmore large-capacity dryers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
W10849499
OEM Part Number
W10849499 (formerly W10610882)
Part Type
Dryer Drum Drive Belt
Condition
Aftermarket Replacement
Application
Whirlpool Large-Capacity Dryers
Length
Approx. 97.75 in.
Routing
Around drum → idler tension pulley → drive motor pulley
Fuel Type
Electric and gas dryers
Companion Part
Idler pulley PS334244 (check/replace if belt failed prematurely)
Quantity
1 belt
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Inglis, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — A Second Person Helps Support The Drum Disconnect power at the outlet or shut off the circuit breaker before beginning. On a gas model, also close the gas shutoff valve before moving the cabinet. Wear work gloves — sheet metal edges inside the cabinet are sharp. On many large-capacity models, both the front and rear panels need to come off to fully access the belt and drum, so budget extra time compared to a simpler platform. Photograph how the old belt routes around the drum, the idler pulley, and the motor pulley before removing anything. Loosen and remove the motor mount or bracket as needed to slip the old belt free, and check the idler pulley by spinning it with your fingers — if it's stiff, gritty, or doesn't spin freely, replace it at the same time, since a worn pulley is a common cause of premature belt failure and will shorten the life of the new belt. With the front panel off, the drum may need to be supported by hand as it comes free — having a second person hold the drum steady makes this significantly easier and reduces the risk of scratching the drum or dropping it. Vacuum out accumulated lint while the cabinet is open. Place the new belt around the drum, seat it in the polished wear track left by the old belt, then route it around the idler pulley and around the motor pulley. Reinstall the motor mount, rotate the drum by hand to confirm the belt tracks straight and stays centered, then reassemble the front and rear panels. Restore power and run a short empty cycle listening for squeal or thump before loading it. Tools needed: nut driver or bit driver, open-end wrench, Phillips screwdriver, work gloves, and ideally a second person to support the drum.
Frequently Asked Questions
How do I confirm the belt is broken and not the motor?
With the dryer unplugged, open the door and try to spin the drum by hand. An intact belt gives firm resistance, because you're turning the motor and idler through the belt. If the drum coasts freely like a bicycle wheel, the belt is broken or has jumped off its pulleys. Sound is the other tell: with a broken belt the motor hums and the blower whooshes normally, so the dryer sounds like it's running perfectly while the drum sits still.
My belt broke and I noticed the idler pulley felt stiff. Do I need to replace that too?
Yes, strongly consider it. A worn or seized idler pulley is a well-documented cause of belt failure — if the pulley can't spin freely, it drags against the belt continuously instead of rolling with it, which wears through even a brand-new belt quickly. If your old belt broke and the pulley feels stiff, gritty, or doesn't spin smoothly when you turn it by hand, replace the idler pulley (part PS334244) along with the belt to avoid repeating this repair soon.
Is this the same length as your other Whirlpool dryer belt listings?
Not necessarily — Whirlpool uses different belt lengths across different dryer platforms even when the rib profile looks similar. This belt is approximately 97.75" long, which is specific to the large-capacity platform it's designed for. Always check your model number or measure your old belt's total length before ordering, since a belt of the wrong length will not seat and tension correctly.
Why does replacing this belt need two people?
On this large-capacity platform, accessing the belt often means removing the front panel and freeing the drum, which is heavy and can be awkward to support single-handedly while also working with your other hand. A second person holding the drum steady while you route the new belt reduces the risk of the drum shifting, scratching the finish, or being dropped. It's not strictly required, but it makes the job considerably easier.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the approximately 97.75" length and rib profile of the original W10849499 / W10610882 belt used in compatible Whirlpool, Maytag, KitchenAid, Jenn-Air, and related large-capacity dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 6931EL3001F Dryer Hi-Limit Thermostat
The XPARTCO 6931EL3001F is an aftermarket replacement dryer rear hi-limit heater thermostat compatible with select LG and Kenmore electric and gas dryers. The hi-limit thermostat is a safety switch mounted on the heater housing that monitors the temperature at the heating element. If the heater temperature exceeds the safe operating limit, the thermostat opens its contacts to cut power to the heating element, protecting the dryer and its contents from overheating. When cooled, the thermostat resets automatically — but if it fails internally, it may remain open permanently, causing the dryer to produce no heat despite the thermal fuse and other components being intact.
Rated L125-31C, 250V, 25A, this 3-terminal thermostat measures 2"L x 1-3/4"W x 1-1/4"H with approximately 1-5/8" between mounting holes (center to center). It is constructed from metal and plastic in gray/black and mounts directly on the heater housing. It directly replaces 1377779, AP5072172, AH3530482, EA3530482, EAP3530482, PS3530482, and PD00023316. Often replaced together with the 6931EL3003D thermal fuse — both mount on the heater housing and work as a system to protect the dryer from overheating. Installs in 15–20 minutes with basic hand tools.
Quick Answer
The XPARTCO 6931EL3001F Dryer Hi-Limit Thermostat fixes LG and Kenmore dryers with no heat where the thermostat has failed open. Rated L125-31C, 250V/25A, 3 terminals. 2"L x 1-3/4"W x 1-1/4"H, ~1-5/8" between mounting holes. Mounts on heater housing. Test with multimeter — should show closed continuity at room temperature. Often replaced together with 6931EL3003D thermal fuse. Replaces 1377779, AP5072172, AH3530482, EA3530482, EAP3530482, PS3530482.
Common Problems This Part Fixes
Dryer produces no heat — hi-limit thermostat has failed open and is permanently interrupting the heater circuit
Dryer takes much longer than normal to dry a load
Dryer tumbles normally but generates no heat during the cycle
No heat even after the thermal fuse has already been replaced — thermostat also failed
Dryer overheating intermittently — thermostat not opening at the correct temperature
Multimeter test shows open circuit (no continuity) across the thermostat at room temperature
Replaces Part Numbers
This hi-limit thermostat directly replaces the following OEM and cross-reference part numbers:
6931EL3001F, 1377779, AH3530482, ALG51960, EA3530482, EAP3530482, AP5072172, PD00023316, PS3530482
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This hi-limit thermostat is compatible with select LG and Kenmore electric and gas dryers. Compatible models include LG DLE, DLG, DLEX, DLGX, and DLB series dryers, and Kenmore 796-series dryers built on the LG platform.
LG electric dryers — DLE series (DLE2050W, DLE3777W, DLE5955W and related models)
LG electric dryers — DLEX series (select models)
LG gas dryers — DLG series (DLG2051W, DLG3788W and related models)
LG gas dryers — DLGX series (select models)
LG electric and gas dryers — DLB series (select models)
Kenmore / Sears dryers — 796-series (LG-built models)
Tip: When replacing the 6931EL3001F thermostat, also replace the 6931EL3003D thermal fuse at the same time. Both mount on the heater housing and are commonly replaced together — an overheating event that causes one to fail typically stresses both.
Key Features
Hi-limit heater thermostat — safety switch that cuts power to the heating element if heater temperature exceeds safe limits
Auto-resets when cooled — but a failed thermostat that remains open causes permanent no-heat
Rated L125-31C, 250V, 25A — correct specifications for compatible LG and Kenmore dryers
3-terminal design — matches the original wiring configuration on compatible heater housings
Dimensions: 2"L x 1-3/4"W x 1-1/4"H; ~1-5/8" between mounting holes (center to center)
Metal and plastic construction (gray/black) — heat-resistant materials for heater housing application
Mounts directly on the heater housing — accessible from the dryer back panel
Often replaced together with 6931EL3003D thermal fuse for a complete heater housing thermal repair
Test with multimeter before replacing — should show closed continuity at room temperature
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–20 minutes with basic hand tools
Product Specifications
Part Number
6931EL3001F
Part Type
Dryer Rear Hi-Limit Heater Thermostat
Condition
Aftermarket Replacement
Application
LG and Kenmore Electric and Gas Dryers
Thermostat Rating
L125-31C — auto-resets after cooling
Voltage
250V
Amperage
25A
Terminals
3-terminal
Dimensions
2"L x 1-3/4"W x 1-1/4"H
Mounting Hole Spacing
Approx. 1-5/8" center to center
Color
Gray / Black
Material
Metal / Plastic
Location
Heater housing (rear of dryer)
Normal Behavior
Closed continuity at room temperature
Often Replaced With
6931EL3003D Thermal Fuse
Compatible Brands
LG, Kenmore (LG-built)
Installation Notes
⚠️ Unplug Dryer and Shut Off Gas Before Starting Disconnect power (and shut off gas for gas dryers) before beginning. Remove the back panel of the dryer by unscrewing the perimeter screws to access the heater housing. The 6931EL3001F thermostat is mounted on the heater housing — it is the 3-terminal component with gray/black housing. Before removing it, test it with a multimeter: disconnect the wires and probe the terminals. At room temperature a working thermostat shows closed continuity. An open reading confirms failure. Photograph the 3-wire connections before disconnecting — reconnecting in the correct positions is important. Remove the 2 mounting screws and lift the old thermostat off. Install the new thermostat in the same position with the 2 mounting screws and reconnect the wires in the same positions. While the heater housing is accessible, also test and replace the 6931EL3003D thermal fuse if needed. Reinstall the back panel, restore power, and run a test heat cycle. Tools needed: Phillips screwdriver, multimeter.
Frequently Asked Questions
What is the difference between the 6931EL3001F thermostat and the 6931EL3003D thermal fuse?
Both are mounted on the heater housing and protect the dryer from overheating, but they work differently. The 6931EL3001F is a resettable hi-limit thermostat rated L125-31C — it opens when the heater temperature gets too high and resets automatically when cooled. The 6931EL3003D is a one-time thermal fuse that permanently interrupts the circuit if the temperature exceeds its rated limit — once blown, it cannot reset and must be replaced. Both should show closed continuity at room temperature when working. Because both are on the heater housing and experience the same thermal stress, replacing both at the same time is recommended.
How do I test the 6931EL3001F thermostat with a multimeter?
Unplug the dryer and disconnect all three wires from the thermostat terminals. Set your multimeter to continuity or resistance mode. At room temperature, a working 6931EL3001F thermostat should show closed continuity (near-zero resistance) across its contacts. If your multimeter reads open circuit (no continuity / OL), the thermostat has failed and needs replacement. Since this thermostat auto-resets when cooled, always test at room temperature — testing while the dryer is still warm may give a false open reading if the thermostat has legitimately opened due to heat.
My LG dryer has no heat but the thermal fuse is good — could it be the thermostat?
Yes — when the thermal fuse tests good but there is still no heat, the hi-limit thermostat (6931EL3001F) is the next most common culprit. A thermostat that has failed internally may remain permanently open even at room temperature, cutting power to the heating element exactly as a blown thermal fuse would. Test the thermostat with a multimeter for continuity. Also check the cycling thermostat (6931EL3002M) and the thermistor (6323EL2001B) — all three are part of the LG dryer thermal control system and any one of them can cause a no-heat condition.
What does the "L125-31C" rating mean?
The L125-31C rating describes the thermostat's operating parameters. L125 means the thermostat opens (trips) when the temperature reaches approximately 125°C (257°F). The 31 indicates the reset differential — the thermostat resets when the temperature drops approximately 31°C below the trip point, around 94°C (201°F). This rating ensures the thermostat allows the heater to operate at normal drying temperatures while protecting against dangerous overheating.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured from metal and plastic to match the L125-31C rating, dimensions, and 3-terminal configuration of the original 6931EL3001F hi-limit heater thermostat.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
279570 Genuine OEM Whirlpool Dryer Door Catch Kit
The 279570 is a Genuine OEM Whirlpool dryer door catch and strike kit compatible with a wide range of Whirlpool, Kenmore, Roper, Estate, Amana, Crosley, Inglis, KitchenAid, Maytag, and Admiral dryers. The door catch is the spring-clip mechanism on the dryer door that snaps over the door strike to hold the door firmly closed during operation, activating the door switch so the dryer can run. When the catch breaks, wears out, or loses tension, the door will not stay closed, the door switch will not be activated, and the dryer will either not start or will stop mid-cycle. The strike is the corresponding post or tab on the dryer cabinet that the catch engages.
This Genuine OEM kit includes three color-coded door catches of different tensions and two metal door strikes, plus one screw. Because the tension of the catch must match the original, Whirlpool includes three options in the kit — each is color-coded and numbered on the back. Refer to identify which catch is correct for your model. The kit directly replaces a very large list of older cross-reference numbers including 279570VP, 3493, 2003, 8208, 279280, 279337, 696144, 693717, AP3094183, PS334230, and dozens more. Installs in under 15 minutes with a Phillips screwdriver.
Quick Answer
The 279570 Genuine OEM Whirlpool Dryer Door Catch Kit fixes dryers where the door won't stay closed, pops open mid-cycle, or won't activate the door switch to start. Kit includes 3 color-coded catches (different tensions), 2 metal strikes, 1 screw. Use the catch that matches your original. Genuine OEM. Compatible with Whirlpool, Kenmore, Roper, Estate, Amana, Crosley, Inglis, KitchenAid, Maytag, and Admiral dryers. Installs in under 15 minutes.
Common Problems This Kit Fixes
Dryer door will not stay closed during the drying cycle
Door pops open mid-cycle, stopping the dryer
Dryer will not start — door switch not being activated by a worn or broken catch
Door feels loose or does not click shut firmly when closed
Door catch visibly cracked, broken, or missing
Door strike bent or missing — door cannot engage the catch properly
Dryer requires the door to be held or pushed closed to stay running
Replaces Part Numbers
This door catch kit directly replaces the following OEM and cross-reference part numbers:
279570, 14205029, 14205577, 14210022, 2003, 236876, 236877, 241282, 241890, 26000279570, 261847, 263067, 279280, 279337, 279469, 279570VP, 291949, 3390239, 3392538, 3398175, 342295, 347813, 3493, 4165234, 51651001, 51655001, 66021, 690081, 690082, 693717, 694343, 696144, 8208, 830751, 834767, 834813, 834943, 834944, AH334230, DE902, EA334230, EAP334230, FSP279570, AP3094183, AWP39897, PD00002346, PS334230.
Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This door catch kit is compatible with select dryers from the following brands:
Whirlpool dryers (gas and electric)
Kenmore / Sears dryers (Whirlpool-built models)
Roper dryers
Estate dryers
Amana dryers
Crosley dryers
Inglis dryers
KitchenAid dryers
Maytag dryers
Admiral dryers
Important: This kit includes three catches with different spring tensions, color-coded and numbered on the back. You must use the catch that matches the tension of your original. Using the wrong tension catch may result in a door that is too hard to open or too easy to pop open.
Key Features
Genuine OEM kit manufactured by Whirlpool to factory specifications — guaranteed fit and performance
Holds the dryer door closed and activates the door switch so the dryer can run safely
Kit includes 3 color-coded door catches (different spring tensions), 2 metal door strikes, 1 screw
Catches are color-coded and numbered on the back — use the one that matches your original.
Plastic catches with metal strikes and metal screw — durable construction for long service life
Consolidates a very large list of older Whirlpool-family door catch cross-reference numbers
Compatible with 10 major appliance brands on the Whirlpool platform
Quick DIY repair — installs in under 15 minutes with a Phillips screwdriver
Product Specifications
Part Number
279570
Part Type
Dryer Door Catch and Strike Kit
Condition
Genuine OEM
Application
Gas and Electric Dryers
Kit Includes
3 color-coded door catches (different tensions), 2 metal strikes, 1 screw
Material
Plastic catches / Metal strikes
Color
White / Silver
Catch Selection
Color-coded and numbered, Use the catch that matches your original
Compatible Brands
Whirlpool, Kenmore, Roper, Estate, Amana, Crosley, Inglis, KitchenAid, Maytag, Admiral
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power before beginning. using the wrong tension catch will result in incorrect door resistance. Open the dryer door and locate the old door catch on the inside of the door panel and the strike on the dryer cabinet opening. To remove the old catch: press the retaining tabs and pull the catch free from its slot, or unscrew the mounting screw. Install the correct new catch into the same position. To replace the strike: remove the old strike (typically held by a single screw) and install the new strike in the same position. Close the dryer door to confirm it latches firmly with a satisfying click. Restore power and run a short test cycle to confirm the door stays closed and the dryer operates normally. Tools needed: Phillips screwdriver; needle-nose pliers may help with catch removal on some models.
Frequently Asked Questions
Why does the kit include three different catches?
Whirlpool used door catches with different spring tensions across its dryer lineup — a lighter catch on some models and a stiffer catch on others. To cover all compatible models in a single kit, Whirlpool includes three catches of different tensions, each color-coded and numbered on the back. It is important to use the correct one — using a catch with too little tension may allow the door to pop open, while a catch with too much tension may make the door difficult to open.
Do I need to replace both the catch and the strike, or just one?
It depends on which component has failed. The catch (the spring-clip on the door) is the more commonly replaced part — it wears out from repeated use faster than the strike. Inspect both: if the catch is cracked or has lost its spring tension, replace the catch. If the strike is bent, cracked, or missing, replace the strike. Since the kit includes both catches and strikes, you have everything needed for a complete repair. When in doubt, replacing both ensures the full latch system is renewed.
My dryer will not start even after replacing the door catch — what else could it be?
If the dryer still will not start after the catch is replaced, the door switch may also need to be tested. The door switch is the electrical component that the door catch activates when the door closes — if the switch itself is failed, replacing the catch alone will not restore function. Test the door switch (3406105 for most Whirlpool-family models) with a multimeter for continuity in both the open and closed positions. If the switch reads open in both positions or closed in both positions, it has failed and needs replacement.
How is the 279570 different from the W11429587 dryer door catch?
The 279570 is the door catch kit for older Whirlpool-family dryers — it includes multiple catches of different tensions and metal strikes because it covers a wide range of older models. The W11429587 is a single snap-in door catch for newer Whirlpool-family dryers (Cabrio and newer platform models). If your dryer is a newer model with a snap-in catch slot rather than a screw-mounted catch and strike, you likely need the W11429587. Verify your model number to confirm which part is correct.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM kit manufactured by Whirlpool to factory specifications. It is the exact same door catch and strike kit supplied by Whirlpool for compatible dryer service repairs — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
ERP 134715900 Dryer Drum Roller with Axle
Replaces Part Numbers: 134715900, 5304523155, AP6979841, 7134715900, AP6977189, PS12746506.
Description: The Roller Assembly is a replacement part specific to Electrolux, Frigidaire clothes dryer models. It contains multiple smooth-rolling cylinders that guide the dryer drum assembly as it turns.
This is an aftermarket part that can be used as a replacement for the OEM part.
W10410997 Dryer Genuine OEM Drive Motor
Replaces Part Number: W10410997, 2118675, 33001753, 33001853, 33001854, 33002237, 33002462, 33002478, W10410997VP, WFR181207, AH3500892, EA3500892, OEM21090894, AP5272723, PS3500892.
Description: This Dryer Drive Motor is a Genuine OEM part for specific Whirlpool, Kenmore, Maytag dryer models. This motor is responsible for turning the drum and the blower wheel, which allows for effective drying and air circulation within the dryer. Over time, the drive motor can wear out or fail due to mechanical stress, electrical issues, or general wear from regular use. Causes of a bad drive motor include motor burnout, worn bearings, or issues with the electrical connections.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
8557403CM Dryer Thermostat
Replaces Part Numbers: WP8557403, 8557403, 1180102, AP6013164, PS11746386.
Description: This Dryer Thermostat is a replacement part for select Kenmore, Maytag, Whirlpool dryer models. It regulates the temperature inside the dryer, ensuring that it maintains the correct heat levels for safe and efficient drying cycles.
This is an aftermarket part that can be used as a replacement for the OEM part.
Choice 8544771 Dryer Heating Element - Compatible with Whirlpool, Maytag, Kenmore, Amana Dryers
Product Description
Restore your dryer’s heating performance with the Replacement 8544771 Dryer Heating Element. This high-quality replacement heating element coil replaces the Whirlpool WP8544771, designed for select Whirlpool, Maytag, Kenmore, Amana, and other brand dryers. Made of durable metal and ceramic with a nickel-chromium coil, it produces 5400W at 240V to heat air for efficient drying. It fixes issues like no heat, insufficient heat, long drying times, or clothes remaining damp.
Note: Requires reuse of the existing heating element housing. Inspect thermostats (e.g., 279973, 279816) and thermal fuses (e.g., 3392519) for continuity, as they often fail alongside the element. Test the coil with a multimeter before replacement to confirm failure.
Replaces part numbers: WP8544771, 8544771, 1180054, W10836011, WP8544771VP, DE771, AP6013115, PS11746337.
Compatibility:
Compatible with models including but not limited to:
Whirlpool: WED8300SW0, WED8300SW1, WED8500SR0, WGD8300SW0, WGD8300SW1, MEDB850WB, MEDB850WL, MEDB850WR0
Maytag: 7MMGDB850WL0, 7MMGDB850WL1, MEDB200VQ0, MEDB400VQ1, MEDB700VQ0, MEDB800VB0, MEDB800VQ0, MEDB800VU0, MEDB850WB0
Kenmore: 110.67042600, 110.77086600, 110.87081601, 110.87088602
Amana: NED5800DW0, YNED5800DW0
Verify your model number or contact Parts-O-Matic support for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis, Roper, Admiral, Jenn-Air, Estate, and KitchenAid dryer models.
🔥 Specifications: Heater coil with 5/16" male terminals, 5400W, 240V, made of metal and ceramic with nickel-chromium wire, dimensions 13-7/8"L x 6-1/2"W x 2-1/2"H, insulators and restring pre-attached.
💰 Cost-Effective Alternative: Replacement element offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires a Phillips screwdriver, 5/16" nut driver, pliers, work gloves, and multimeter; typically installed in 30–60 minutes.
🛡️ Reliable Fixes: Resolves no heat, insufficient heat, long drying times, or damp clothes after drying.
Installation Notes:
Tools Needed: Phillips screwdriver, 5/16" nut driver, pliers, work gloves, multimeter, flathead screwdriver.
Safety First: Unplug the dryer from the power source and, for gas dryers, shut off the gas valve before installation.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Get your dryer back to efficient, reliable performance today!
Add to cart now for a budget-friendly fix!
2 Pack - 12638000004021 Genuine OEM Midea Dryer Drum Roller
The 12638000004021 is a genuine Midea OEM dryer drum support roller, sold under the Frigidaire/Midea manufacturing relationship for Midea-built dryers and select Frigidaire, Insignia, and Kenmore dryers using this same platform. This roller sits underneath the drum, along its rear support track, and does the physical work of holding the drum's weight while letting it turn freely as the belt drives it around. A dryer typically uses more than one of these rollers working together to keep the drum properly supported and centered.
Over time, the wheel and bearing inside the roller wear down from the constant heat and rotation the dryer subjects them to, eventually developing a flat spot, seizing up, or simply wearing thin enough that the drum sits unevenly. A worn roller produces a distinctive symptom: a rumbling, squeaking, or thumping noise that rises and falls with drum rotation, often getting louder as a load tumbles. It directly replaces 5304511415, AP7990985.
Quick Answer
The 12638000004021 Genuine OEM Midea Dryer Drum Roller fixes Midea-built dryers (and select Frigidaire, Insignia, and Kenmore dryers on this platform) with a rumbling, squeaking, or thumping noise that rises and falls with drum rotation. Supports and centers the drum on its rear track. Replaces 5304511415, AP7990985.
Common Problems This Part Fixes
Rumbling or grinding noise that rises and falls with drum rotation
Squeaking or squealing noise from inside the dryer during operation
Thumping or knocking noise, especially with a heavier load
Noise that gets louder over time as the roller wears further
Drum that sits unevenly or wobbles slightly when turned by hand
Visible flat spot, cracking, or wear on the roller wheel
Noise that continues even with an empty drum tumbling
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer drum roller directly replaces the following OEM and cross-reference part numbers:
12638000004021, AP7990985, PS18170578, 5304511415, 4056012471, AP8049485, PS17993389.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum roller is compatible with select Midea-built dryers, and also fits select Frigidaire, Insignia, and select Kenmore dryers built on the same Midea platform.
Note: Always verify your full model number before ordering, since Midea and its partner brands use several different roller designs across their dryer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Midea OEM part — factory-specified wheel and bearing design
Supports the drum along its rear track, allowing smooth rotation as the belt drives it
Resolves "rumbling," "squeaking," and "thumping" noise symptoms caused by roller wear
Direct drop-in replacement for the original roller and axle assembly
Replaces 5304511415, AP7990985.
Compatible with Midea, Frigidaire, Insignia, and select Kenmore dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
12638000004021
Part Type
Dryer Drum Support Roller
Condition
Genuine OEM
Brand
Midea
Location
Rear drum support track
Function
Supports and centers the drum during rotation
Quantity
1 roller
Compatible Brands
Midea, Frigidaire, Insignia, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. On a gas model, also close the gas shutoff valve before moving the cabinet. Wear work gloves — sheet metal edges inside the cabinet are sharp. Access is typically through the rear panel: remove the screws securing the panel, then release the drum belt from the idler pulley to relieve tension so the drum can be supported and moved slightly for access to the rollers underneath. Photograph the roller and axle positions before removing anything. Remove the retaining clip or fastener holding the worn roller's axle in place, then slide the old roller off. Install the new 12638000004021 roller onto the axle in the same orientation, and secure it with the retaining clip or fastener. While you're in there, check the other rollers by spinning each one by hand — if any feel stiff, gritty, or worn, replace them at the same time, since they're typically the same age and wear on a similar schedule. Re-tension the belt around the idler pulley, reassemble the rear panel, restore power, and run a short empty cycle to confirm the noise has resolved. Tools needed: Phillips screwdriver, nut driver, pliers, work gloves.
Frequently Asked Questions
My dryer makes a rumbling noise that gets louder over time. Is this the part I need?
Yes, this is the classic symptom of a worn drum roller. As the wheel and bearing wear down, the noise typically starts subtle and gradually worsens, often becoming most noticeable with a full load as the extra weight puts more load on the worn wheel. If the noise rises and falls in rhythm with the drum turning, a roller is the most likely cause.
Should I replace just one roller, or all of them?
It's worth checking all of them while you have access. Dryers typically use more than one roller supporting the drum, and since they're the same age and under the same stress, if one has worn out the others are often not far behind. Spin each roller by hand — if any feel stiff, gritty, or rough, replace them together to avoid repeating this repair again soon.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Midea to factory specifications — guaranteed fit, materials, and performance. It matches the original wheel design, bearing, and axle fitment of the drum roller originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 6931EL3002M Dryer Blower Thermostat – Compatible with LG and Kenmore Dryers
Product Description
Restore proper temperature regulation in your dryer with the XPARTCO 6931EL3002M Dryer Blower Thermostat. This Dryer Blower Thermostat is a replacement part for select LG dryer models. It plays a role in regulating the operation of the blower motor, which is responsible for circulating hot air throughout the dryer during the drying cycle. Common causes of a bad dryer blower thermostat can include electrical malfunctions, physical damage, or simply wear and tear over time.
Replaces Part Numbers
6931EL3002M, 6931EL3002A, 6931EL3002K, PD00023476, EAP8747887, AP5782317, PS8747887.
Compatibility
This replacement blower thermostat (mounts on blower housing). fits select LG and Kenmore (manufactured by LG) dryers.
Example compatible models include (but are not limited to):LG DLE5977W, DLE3170W, DLEX3470V, and Kenmore 796.81022900.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM temperature control performance
🌡️ Accurate Temperature Regulation – Maintains proper blower housing heat levels. Thermostat 85C, 185F.
💰 Budget-Friendly Option – Provides OEM-level reliability at a lower price
🛠️ Easy Installation – Direct-fit design with standard mounting hardware
🛡️ Fixes Common Issues – Solves overheating, no-heat problems, long dry times, and auto-shutoff issues
📐 Product Specification
Part Number: 6931EL3002M
Component Type: Dryer Blower Thermostat
Material: Metal thermostat housing with bimetal sensor
Temperature Rating: Opens/closes at OEM-equivalent temperature thresholds
Mounting: Two-screw mounting to blower housing
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before performing repairs to prevent electrical shock and injury.
Steps:
Disconnect power and remove the dryer’s rear access panel.
Locate the blower housing and identify the thermostat.
Remove the mounting screws and disconnect the wiring.
Install the new XPARTCO 6931EL3002M thermostat in the same position.
Reconnect wires, reinstall the panel, and restore power.
Run a test cycle to confirm proper temperature cycling.
⏱️ Time Required: 10–15 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore safe temperature control — Add to Cart Now for a reliable, cost-effective repair!
3204267 Dryer Genuine High-Limit Thermostat
Replaces Part Numbers: 3204267, 145160, 508516, 73204267, AH446428, EA446428, OEM8525910, AP2131477, PS446428, WE4X757, WE04X0757, WE04X10002, WE4X10002, AH268202, EA268202, OEM8171210, AP2042802, PS268202.
Description: This High Limit Thermostat is a Genuine part for specific Frigidaire, GE dryer models. It serves as a critical safety device, designed to cut off the power to the heating element if the dryer overheats. This thermostat helps prevent potential fire hazards by maintaining a safe operating temperature within the dryer.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO 3406108 Dryer Door Switch - Compatible with Whirlpool, Kenmore, Maytag Dryers
Product Description
Ensure safe and reliable operation of your dryer with the replacement XPARTCO 3406108 Dryer Door Switch. This door switch is designed for select Whirlpool, Kenmore, Maytag, and other dryer models, preventing operation when the door is open and ensuring proper start/stop functionality. It addresses issues like the dryer not starting, running with the door open, or failing to stop, offering a cost-effective alternative to OEM parts.
Note: Includes one door switch with 2 wire leads and a two-prong plug. Sold individually. Disconnect power before installation. Verify compatibility with your dryer model.
Replaces part numbers: WP3406108, 3406108, PD00029356, EAP11741702, PS11741702, AP6008562.
Compatibility:
Compatible with models including but not limited to:
Whirlpool: LTE5243DQ1 , LTE5243DQ2 , LTE5243DQ3 , LTE5243DQ4 , LTE5243DQ5 , LTE5243DQ6 , LTE5243DQ7 , LTE5243DQ8 , LTE5243DQ9 , LTE5243DQA , LTE5243DQB , LTE5243DT2 , LTE5243DT3 , LTE5243DT4 , LTE5243DT5 , LTE5243DT6 , LTE5243DT7 , LTE5243DZ1 , LTE5243DZ2 , LTG5243DQ1 , LTG5243DQ2 , LTG5243DQ3 , LTG5243DQ4 , LTG5243DQ5 , LTG5243DQ6 , LTG5243DQ7 , LTG5243DQ8 , LTG5243DQ9 , LTG5243DQA , LTG5243DQB , LTG5243DQC , LTG5243DT2 , LTG5243DT3 , LTG5243DT4 , LTG5243DT5 , LTG5243DT6 , LTG5243DT7 , LTG5243DT8 , LTG5243DZ1 , LTG5243DZ2 , WET4024EW0 , YLTE5243DQ2 , YLTE5243DQ3 , YLTE5243DQ4 , YLTE5243DQ5 , YLTE5243DQ6 , YLTE5243DQ7 , YLTE5243DQ8 , YLTE5243DQ9 , YLTE5243DQA , YLTE5243DQB , YWET4024EW0.
Kenmore: 11060012000, 11060022010, 11060232000
Maytag: MEDC400VW0, AED4475TQ1
Other brands: Select models requiring 3406108 (e.g., Amana, Crosley, Roper)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, Amana, Crosley, and Roper dryers requiring 3406108.
🔥 Specifications: Replacement dryer door switch, 2 wire leads, two-prong plug, 120-240V, 50-60Hz, 11A, 1/3HP.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, work gloves; typically installed in 5–10 minutes.
🛡️ Effective Fixes: Resolves issues like dryer not starting, running with door open, or failing to stop when door is opened.
Product Specification
Part Number: XP3406108
Component Type: Dryer door switch
Material: Durable plastic housing with metal contacts
Terminal Type: Two-prong plug with 2 wire leads
Operating Conditions: Suitable for high-heat dryer environments
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Tools Needed: Phillips screwdriver, work gloves.
Process: Locate the door switch near the dryer door frame, disconnect wiring, remove the old switch, and install the new one, ensuring proper terminal connections.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running safely today!
Add to cart now for a budget-friendly fix!
ERP WE4M181 Dryer Cycling Thermostat
This cycling thermostat is a replacement part responsible for regulating and controlling the temperature inside a dryer during the drying cycle. Typically located near the dryer's heating element or burner assembly, this thermostat constantly monitors the temperature within the dryer drum. Its primary function is to cycle the heating element on and off as needed to maintain a consistent and safe operating temperature. The cycling thermostat can also be used on Specific Hotpoint, RCA, and Kenmore/Sears appliance models.
Replaces Part Numbers:
WE4M181, WE04M0181, WE4M245, AH267926, EA267926, AP2044414, PS267926.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
