5303918214 Genuine OEM Frigidaire Refrigerator Defrost Thermostat
The 5303918214 is a genuine Frigidaire OEM defrost thermostat kit for Frigidaire, Electrolux, Kenmore, Gibson, Kelvinator, Westinghouse, and Crosley refrigerators — commonly used on side-by-side and French door models equipped with an ice maker. This thermostat monitors the temperature of the evaporator coils: when the coils drop below a set temperature, it allows power to reach the defrost heater so frost can be cleared; once the coils warm back up, it cuts power to the heater again, protecting the evaporator from being overheated during that process.
The most common reasons this thermostat gets replaced are a classic pair of symptoms: the freezer stays cold while the fresh food refrigerator section runs warm, or the refrigerator simply isn't defrosting on its normal cycle. Because this thermostat sits behind the rear access panel near the ice maker on many compatible models, replacing it typically involves removing the ice maker and the back panel to reach it — a more involved repair than a thermostat mounted in an easily accessible spot. It directly replaces AP2150145, 892545, AH469522, EA469522, PS469522, and 75303918214. As a genuine OEM part, the 5303918214 is manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The 5303918214 Genuine OEM Frigidaire Refrigerator Defrost Thermostat fixes Frigidaire, Electrolux, Kenmore, Gibson, Kelvinator, Westinghouse, and Crosley refrigerators where the freezer stays cold but the fresh food section runs warm, or the refrigerator isn't defrosting on its normal cycle. Replaces AP2150145, 892545, AH469522, EA469522, PS469522, 75303918214. This is a separate part from our 5303918202 defrost thermostat listing — the two fit different model groups and are not interchangeable. Installation on many compatible models requires removing the ice maker to access the thermostat.
Common Problems This Part Fixes
Freezer stays cold but the fresh food refrigerator section runs warm
Refrigerator not defrosting on its normal cycle
Excessive frost or ice buildup on the evaporator coils
Refrigerator or freezer not cooling properly overall
Water leaking inside the refrigerator from melting ice buildup
Refrigerator running constantly as ice-caked coils reduce cooling efficiency
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator defrost thermostat directly replaces the following OEM and cross-reference part numbers:
5303918214, 75303918214, 892545, AH469522, EA469522, AP2150145, 240372703, 39TVE31, EAP469522, PS469522, AFR16819, PD00000354, L47-22F, SL8214, ER5303918214
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This defrost thermostat is compatible with select Frigidaire refrigerators, and also fits select Electrolux, Kenmore, Gibson, Kelvinator, Westinghouse, and Crosley refrigerators built on the same platform, including model numbers such as:
FGHS2631PF4A, FGHS2655PF5A
FGHC2331PFAA, FGHC2331PFCA
FFHS2611PFEA, FFHS2611LBRA, FFHS2611LWMA, FFHS2622MSYA
FFSS2614QS6A
Note — not the same as 5303918202: This is a separate thermostat from our 5303918202 listing. The two fit different model groups and are not interchangeable, so always verify your full model number rather than assuming based on similar part number prefixes. Contact our support team with your model number if you're unsure which thermostat fits your refrigerator.
Key Features
Genuine Frigidaire OEM part — factory-specified temperature threshold and mounting configuration
Defrost thermostat kit for Frigidaire-platform refrigerators with an ice maker
Monitors evaporator coil temperature and controls power to the defrost heater
Resolves "freezer cold, fridge warm," "not defrosting on schedule," and "icy evaporator coils" symptoms caused by thermostat failure
Ships with wiring diagram guidance for a correct connection
Direct drop-in replacement — mounts to the original housing location
Replaces AP2150145, 892545, AH469522, EA469522, PS469522, and 75303918214
Compatible with Frigidaire, Electrolux, Kenmore, Gibson, Kelvinator, Westinghouse, and Crosley refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
5303918214
Part Type
Refrigerator Defrost Thermostat Kit
Condition
Genuine OEM
Function
Monitors evaporator coil temperature and controls power to the defrost heater
Typical Location
Rear access panel area, near the ice maker on many compatible models
Repair Difficulty
Moderate — ice maker removal typically required for access
Quantity
1 defrost thermostat kit
Compatible Brands
Frigidaire, Electrolux, Kenmore, Gibson, Kelvinator, Westinghouse, Crosley
Installation Notes
⚠️ Unplug Refrigerator And Shut Off Water Supply Before Starting Unplug the refrigerator from the wall outlet and turn off the water supply to the refrigerator before beginning. Wear work gloves. If your model has an ice maker, remove it first using a screwdriver to gain clearance for the next steps. Remove the back panel with a screwdriver to expose the defrost thermostat. Take out the existing thermostat and disconnect its wiring, labeling or photographing each connection first. Install the new 5303918214 thermostat by connecting the wires according to the wiring diagram provided with the kit, then secure the thermostat to the main housing using the small mounting screws. Reinstall the back panel, plug the refrigerator back in, turn the water supply back on, and reinstall the ice maker. Test the refrigerator over the following day to confirm both compartments are cooling evenly and the defrost cycle is running normally. Tools needed: screwdriver, wire cutters/strippers, work gloves.
Frequently Asked Questions
Do I really need to remove the ice maker for this repair?
On many compatible models, yes — the thermostat sits behind the rear access panel in an area that the ice maker partially blocks, so removing it first gives you the clearance needed to reach the panel and the thermostat behind it. It's an extra step compared to some simpler defrost thermostat replacements, but it's a standard part of this particular repair.
My freezer is cold but the fridge is warm. Is this the thermostat?
Yes, this is the classic symptom of a failed defrost thermostat. When it fails, the defrost heater can't run correctly to clear frost from the evaporator coil, and the resulting ice buildup blocks the airflow that's supposed to carry cold air to the fresh food compartment. The freezer, sitting closer to the coil, often stays reasonably cold, while the fresh food side runs warm since it depends on that circulated air.
I replaced the thermostat but my freezer temperature is still fluctuating. What should I check next?
Replacing this thermostat resolves the issue for most customers, but if fluctuation continues, it's worth checking the other components in the same defrost circuit — the defrost timer and defrost heater — since a failure in either of those can produce similar temperature instability even with a good thermostat installed. It's also worth confirming the door seals are sealing properly, since a poor seal lets warm air in and can cause temperature swings unrelated to the defrost system.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original temperature threshold, mounting configuration, and function of the defrost thermostat originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
5040JA2004A Genuine OEM LG Refrigerator Motor Damper Grommet (Rear)
The 5040JA2004A is a genuine LG OEM rubber motor damper grommet for LG and select Kenmore refrigerators. This small rubber component mounts and isolates a fan motor from the surrounding bracket, cushioning it against vibration as the motor runs. This is the rear-position grommet; LG refrigerators typically use more than one grommet to support a fan motor from multiple points.
Made of rubber, this grommet naturally degrades over years of exposure to cold temperatures and constant vibration, eventually cracking, hardening, or losing its cushioning shape. Once it fails, the motor it supports is no longer properly isolated, and the metal motor bracket can end up in direct contact with the surrounding housing. A worn or failed grommet typically shows up as new or worsening rattling, buzzing, or vibration noise coming from the back of the refrigerator, especially noticeable when the fan motor is running. It directly replaces 5040JA2004B, 1268010, AP4635690, AH3526229, EA3526229, PS3526229, EAP3526229, and PD00027884.
Quick Answer
The 5040JA2004A Genuine OEM LG Refrigerator Motor Damper Grommet (Rear) fixes LG and select Kenmore refrigerators with new or worsening rattling, buzzing, or vibration noise from the back of the unit, especially when the fan motor is running. Rubber, rear-position grommet. Replaces 5040JA2004B, 1268010, AP4635690, AH3526229, EA3526229, PS3526229, EAP3526229, PD00027884. This grommet is used with a fan motor at the rear of the refrigerator; sources vary on whether that's the evaporator or condenser fan depending on the specific model, so confirm your model number before ordering.
Common Problems This Part Fixes
Rattling or buzzing noise from the back of the refrigerator
Vibration noise that's especially noticeable when the fan motor is running
Noise that has gradually worsened over time
Visibly cracked, hardened, or flattened rubber grommet
Motor bracket that feels loose or vibrates excessively against its housing
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This motor damper grommet directly replaces the following OEM and cross-reference part numbers:
5040JA2004A, 1268010, AP4635690, AH3526229, EA3526229, PS3526229, EAP3526229, PD00027884
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This motor damper grommet is compatible with select LG refrigerators, and also fits select Kenmore refrigerators built on the LG platform, including model numbers such as LSXS26386S00, LTCS20030S/00, LTC24380SB00, LRSCS21935SW, LFC24770ST/02, LSXS26326W/01, and Kenmore 795.79043311, 795.51089011, 795.51832412, 795.79412810, and 795.78032211.
Note: This is the rear-position grommet. LG also lists a related grommet, part number 5040JA2009B, used as a support damper for fan motors on other models — the two are not necessarily interchangeable, so confirm your exact part number and position before ordering. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine LG OEM part — factory-specified rubber compound and fit
Isolates the fan motor from its bracket, cushioning it against vibration
Resolves "rattling," "buzzing," and "vibration noise" symptoms caused by a worn or failed grommet
Rear-position grommet
Durable rubber construction designed for the refrigerator's cold operating environment
Direct drop-in replacement — no tools required on most models
Replaces 5040JA2004B, 1268010, AP4635690, AH3526229, EA3526229, PS3526229, EAP3526229, and PD00027884
Compatible with LG and select Kenmore refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
5040JA2004A
Part Type
Fan Motor Damper Grommet — Rear
Condition
Genuine OEM
Brand
LG
Material
Rubber
Function
Isolates and cushions a fan motor from vibration at its bracket
Position
Rear
Related Part
5040JA2009B (support damper, different position/models — verify before substituting)
Repair Difficulty
Very Easy — typically no tools required
Quantity
1 damper grommet
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler if access requires opening the freezer compartment. Wear work gloves. Access depends on your model — this grommet supports a fan motor that may be located behind the freezer's rear interior panel or in the compressor/machine compartment at the back or bottom of the unit, so check your model's service diagram for the exact location. Remove any panel screws needed to reach the motor bracket. Photograph the grommet's position and how it seats against the bracket before removing it. Gently remove the old, worn grommet from around the motor mounting post — it typically pulls or presses off without tools. Press the new 5040JA2004A grommet into the same position, seating it fully so it cushions the motor bracket evenly. Reassemble any panels removed for access, restore power, and run the refrigerator for a while to confirm the rattling or vibration noise has resolved. Tools needed: Phillips screwdriver (for panel access), work gloves.
Frequently Asked Questions
My refrigerator has developed a rattling noise from the back. Is this the grommet?
Yes, this is a common cause of exactly that symptom. Once the rubber grommet cracks, hardens, or loses its cushioning shape, the fan motor's mounting bracket is no longer properly isolated and can vibrate directly against the surrounding housing, producing a rattling or buzzing noise — especially noticeable whenever the fan motor is actively running.
Is this for the evaporator fan motor or the condenser fan motor?
Sources describe this grommet's application somewhat differently depending on the specific refrigerator model — some reference it as supporting the evaporator fan motor, others the condenser fan motor. In practice, this reflects that LG uses the same grommet design for fan motor mounting in more than one location depending on the model. Confirm your full model number against the compatibility list, or check your appliance's parts diagram, to be certain which motor this grommet supports on your specific unit.
Do I need any tools to replace this?
The grommet itself is tool-free — it simply presses into place around the motor mounting post. You will likely need a screwdriver to remove whatever panel is covering the area where the motor and grommet are located, but the grommet swap itself requires no tools.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original rubber compound and mounting fit of the motor damper grommet originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 2188820 Refrigerator Thermistor (Sensor) Replaces WP2188820
The XPARTCO 2188820 is an aftermarket replacement refrigerator temperature sensor (thermistor) compatible with select Whirlpool, Kenmore, KitchenAid, Maytag, Jenn-Air, Dacor, and Thermador refrigerators. The thermistor is an NTC (negative temperature coefficient) sensor that continuously monitors the air temperature inside the refrigerator or freezer compartment and sends resistance-based readings to the electronic control board. The control board uses these readings to regulate compressor run time and fan operation, maintaining the set temperature accurately and efficiently.
This thermistor features an NTC resistance of 50K ohms at 25°C (27K ohms at 0°C/32°F) and a standard wire length of approximately 5.3 inches (13.46 cm), compatible with low-voltage refrigerator control boards (5V/12V). It directly replaces WP2188820, 2213442, AP6006068, PS11739132, and 1057764. Note: this thermistor is compatible with non-WISE system refrigerators only — it is not compatible with newer Whirlpool refrigerators using the WISE (Whirlpool Intelligent Smart Energy) control system. Installs in under 15 minutes.
Quick Answer
The XPARTCO 2188820 Refrigerator Thermistor fixes Whirlpool-family refrigerators that are too warm, too cold, have erratic temperatures, run the compressor too long, or display temperature-related error codes. NTC sensor, 50K ohm at 25°C, ~5.3" wire. Non-WISE system models only. Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Jenn-Air, Dacor, and Thermador. Replaces WP2188820, 2213442, AP6006068, PS11739132.
Common Problems This Part Fixes
Refrigerator not maintaining set temperature — too warm or too cold
Freezer section too warm or food not freezing properly
Compressor running continuously without cycling off
Temperature fluctuating erratically despite stable ambient conditions
Refrigerator temperature-related error codes displayed on the control panel
Excessive frost buildup caused by incorrect temperature regulation
Food or beverages freezing in the fresh food section
Replaces Part Numbers
This refrigerator thermistor directly replaces the following OEM and cross-reference part numbers:
WP2188820, 2188820, 2213442, EAP11739132, AWP46934, PD00033406, AP6006068, PS11739132.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermistor is compatible with select refrigerators from the following brands and series:
Whirlpool refrigerators — 5VW, GC3, EC3, GC5 series
Kenmore / Sears refrigerators — 106 series (Whirlpool-built models)
KitchenAid refrigerators — KSCS, KSSS, JS series
Maytag refrigerators (select models)
Jenn-Air refrigerators (select models)
Dacor refrigerators (select models)
Thermador refrigerators (select models)
Important — WISE System Compatibility: The 2188820 thermistor is compatible with non-WISE system refrigerators only. It is not compatible with newer Whirlpool refrigerators equipped with the WISE (Whirlpool Intelligent Smart Energy) control system. If your refrigerator uses the WISE system, this thermistor will not work correctly. Verify your model number before ordering, or contact our support team to confirm compatibility.
Key Features
NTC (negative temperature coefficient) thermistor — resistance decreases as temperature increases, allowing precise temperature monitoring
50K ohm resistance at 25°C (27K ohm at 0°C/32°F) — matches original WP2188820 specifications
Wire length approximately 5.3 inches (13.46 cm) — standard length matching OEM dimensions
Low-voltage design compatible with 5V/12V refrigerator control boards
Continuously sends temperature readings to the control board to regulate compressor and fan operation
Non-WISE system compatible only — verify your model before ordering
Direct replacement for WP2188820, 2213442, AP6006068, and PS11739132
Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Jenn-Air, Dacor, and Thermador refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in under 15 minutes
Product Specifications
Part Number
2188820
OEM Part Number
WP2188820
Part Type
Refrigerator Temperature Sensor (NTC Thermistor)
Condition
Aftermarket Replacement
Sensor Type
NTC (Negative Temperature Coefficient)
Resistance at 25°C
50,000 ohms (50K ohm)
Resistance at 0°C (32°F)
27,000 ohms (27K ohm)
Wire Length
Approximately 5.3 inches (13.46 cm)
Voltage
5V / 12V (low voltage)
WISE System Compatibility
Non-WISE models only
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Jenn-Air, Dacor, Thermador
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power before beginning. The thermistor location varies by model — it is typically clipped to a bracket on the interior side wall of the fresh food or freezer compartment, or mounted near the evaporator coil. Consult your model's parts diagram or service manual to confirm the exact location before disassembly. Open the sensor cover or unclip the sensor bracket, disconnect the wiring connector, and pull the old thermistor out. Insert the new 2188820 thermistor, reconnect the wiring connector, and snap the cover or bracket back into place. Ensure the sensor head is positioned close to the compartment wall and the wiring is not pinched. Restore power and monitor the refrigerator temperature over the next few hours to confirm stable, accurate cooling. Tools needed: Phillips screwdriver (for panel access on some models); no tools needed for sensor replacement itself.
Frequently Asked Questions
What is the difference between 2188820 and WP2188820?
These are the same thermistor. WP2188820 is the updated Whirlpool OEM part number that superseded the original 2188820. The 2213442 is also a cross-reference for the same part. This aftermarket replacement is compatible with all three numbers.
What does an NTC thermistor do and how do I know if mine has failed?
An NTC thermistor is a resistor whose resistance decreases as temperature increases. The control board sends a small voltage through the thermistor and measures the resulting resistance — a lower resistance means warmer temperature, and a higher resistance means cooler temperature. The board uses this reading to decide when to run the compressor and fans. A failed thermistor either reads open circuit (no continuity), short circuit (zero resistance), or provides incorrect readings that cause the refrigerator to run too warm, too cold, or cycle erratically. Test with a multimeter at room temperature — a working 2188820 should read approximately 50K ohms at 25°C (77°F). Significant deviation indicates failure.
How do I know if my refrigerator uses the WISE system?
The WISE (Whirlpool Intelligent Smart Energy) system was introduced on newer Whirlpool refrigerator models and uses a different thermistor specification that is not interchangeable with the 2188820. Models that use the WISE system are typically marked in the product documentation or on the control board. The easiest way to confirm compatibility is to verify your model number with our support team before ordering, or check whether WP2188820 appears in your model's official parts diagram. If your parts diagram lists WP2188820, this replacement is compatible.
Where is the thermistor located in my refrigerator?
The thermistor location varies by model and brand. On Whirlpool and KitchenAid models, it is commonly found on the interior side wall of the fresh food compartment clipped to a plastic housing. On some models it is located near the evaporator coil behind the freezer back panel. On Kenmore 106 series models, it may be on the fresh food section wall or inside the back panel. Consult your specific model's parts diagram or search for a model-specific installation video to locate the sensor before disassembling the refrigerator.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured with an NTC thermistor rated to the same 50K ohm specification as the original WP2188820 to match the performance and accuracy of the factory sensor.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10464673 Refrigerator Evaporator Fan Motor Replaces WPW10464673
The XPARTCO W10464673 is an aftermarket replacement refrigerator evaporator fan motor compatible with select Whirlpool, KitchenAid, Maytag, Kenmore, and Ikea bottom-freezer and French door refrigerators. The evaporator fan motor is located inside the freezer compartment and circulates cold air from the evaporator coils throughout both the freezer and fresh food sections. Without the evaporator fan running, cold air cannot be distributed — even if the compressor and evaporator are working correctly, both compartments will gradually warm up. A failed evaporator fan motor is one of the most common causes of a refrigerator that runs but does not cool.
Rated 115V, 60Hz with a 2-pin connector, this motor features a 14mm shaft length, 3mm shaft diameter, and approximately 13cm (5.1") of wire lead. It is constructed from ABS plastic housing with a metal motor core. It directly replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167, and EAP11755167. Compatible models include KitchenAid KFFS and KRFF series, Maytag MFB and MFF series, and several Kenmore 106/596-series models. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The XPARTCO W10464673 Refrigerator Evaporator Fan Motor fixes refrigerators where both compartments are too warm, the refrigerator runs but doesn't cool, or there is unusual noise from inside the freezer. 115V/60Hz, 2-pin connector, 14mm shaft, 3mm shaft diameter, 13cm leads. ABS/metal construction. Compatible with KitchenAid KFFS/KRFF, Maytag MFB/MFF, Whirlpool, and Kenmore 106/596-series. Replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167.
Common Problems This Part Fixes
Both refrigerator and freezer compartments too warm — evaporator fan not circulating cold air
Refrigerator running continuously but not cooling — compressor on but no air circulation
Freezer section cold but fresh food section warm — fan not moving air between compartments
Unusual buzzing, squealing, or grinding noise coming from inside the freezer
No airflow felt inside the refrigerator or freezer when the compressor is running
Fan blade visible inside the freezer but not spinning when the compressor runs
Ice buildup on the evaporator coils causing the fan blade to stop
Replaces Part Numbers
This evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WPW10464673, W10464673, 3020513, AWP50481, EAP11755167, PD00030978, AP6021839, PS11755167, FDQC16WP2A.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select refrigerators from the following brands and series:
KitchenAid refrigerators — KFFS20 and KRFF300 series (KFFS20EYMS02, KFFS20EYBL02, KFFS20EYBL04, KRFF300EBL00, KRFF300EBS00 and related models)
Maytag refrigerators — MFB2055 and MFF2055 series (MFB2055YEB01, MFB2055YEB02, MFB2055YEM01, MFB2055YEM02, MFB2055YEW02, MFF2055DRE00, MFF2055YEB02, MFF2055YEW00, MFW2055FRH00, MFB2055FRW00 and related models)
Whirlpool refrigerators (select bottom-freezer and French door models)
Kenmore / Sears refrigerators — 106 series and 596 series (10673002510, 10673002511, 10673003510, 10673003511, 59673002510, 59673003510, 59673003511, 59673009510, 10679472411, 10679473411 and related models)
Ikea refrigerators (select models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Circulates cold air from the evaporator coils throughout the freezer and fresh food compartments — essential for maintaining set temperatures in both sections
115V, 60Hz — correct electrical specifications for compatible models
2-pin connector — direct plug-in replacement on compatible models
Shaft: 14mm length, 3mm diameter — matches original motor shaft dimensions for fan blade compatibility
Wire lead length: approximately 13cm (5.1 inches)
ABS plastic housing with metal motor core — durable and designed for continuous freezer-temperature operation
Replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167, and FDQC16WP2A
Compatible with KitchenAid KFFS/KRFF, Maytag MFB/MFF, Kenmore 106/596, Whirlpool, and Ikea refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
Part Number
W10464673
OEM Part Number
WPW10464673
Part Type
Refrigerator Evaporator Fan Motor
Condition
Aftermarket Replacement
Application
Bottom-Freezer and French Door Refrigerators
Voltage
115V AC
Frequency
60 Hz
Connector
2-pin plug
Shaft Length
14mm (0.55 inches)
Shaft Diameter
3mm (0.12 inches)
Wire Lead Length
Approximately 13cm (5.1 inches)
Material
ABS plastic housing / Metal motor core
Compatible Brands
Whirlpool, KitchenAid, Maytag, Kenmore, Ikea
Installation Notes
⚠️ Unplug Refrigerator and Shut Off Water Before Starting Unplug the refrigerator and shut off the water supply before beginning. Remove all food and shelving from the freezer compartment. On most compatible models, the evaporator fan is located behind the freezer back panel. Remove the screws securing the freezer back panel and carefully slide it out to expose the evaporator coils and fan assembly. If ice has built up on the fan or coils, use a hair dryer to melt it before attempting to remove the fan — do not force a frozen fan free. Disconnect the 2-pin wire connector from the old motor. Remove the fan blade by pulling it straight off the motor shaft, then unscrew the motor mounting brackets and remove the old motor. Install the new W10464673 motor in the same position, secure the mounting brackets, press the fan blade back onto the shaft, and reconnect the 2-pin connector. Reinstall the freezer back panel, restore power and water, and verify the fan runs when the compressor starts. Tools needed: Phillips screwdriver, hair dryer (if coils are iced), work gloves.
Frequently Asked Questions
What does the evaporator fan motor do?
The evaporator fan motor drives a fan blade inside the freezer compartment that draws air across the evaporator coils — the cold coils remove heat from the air, and the fan distributes the chilled air throughout both the freezer and fresh food sections via a duct system. Without the evaporator fan running, the evaporator coils still get cold and the compressor still runs, but no cold air is circulated. This causes both compartments to gradually warm up even though the refrigeration system itself may be functioning correctly. A failed evaporator fan motor is one of the most common and most frequently misdiagnosed causes of poor refrigerator cooling.
How do I know if the evaporator fan motor has failed?
Open the freezer door and press the door switch (the small button or tab that tells the refrigerator the door is closed) — this should start the evaporator fan if the compressor is running. If you hear no fan noise and feel no airflow from inside the freezer with the compressor running, the fan motor has likely failed. You can also remove the freezer back panel and physically check whether the fan blade spins freely by hand — if it is stuck or wobbles, inspect for ice buildup or a seized motor bearing. If the blade spins freely but the motor does not run when powered, the motor has burned out.
What is the difference between W10464673 and WPW10464673?
These are the same evaporator fan motor. WPW10464673 is the updated Whirlpool OEM part number that superseded the original W10464673. The 3020513 is also a cross-reference for this same motor. This aftermarket replacement is compatible with all of these numbers.
My freezer is cold but my fridge is warm — could it be the evaporator fan?
Yes — this is a classic evaporator fan failure symptom. When the fan motor fails partially, the freezer may still receive some cold air passively from the evaporator, but not enough air is circulated to reach the fresh food section through the duct system. A failed evaporator fan is frequently the cause of this hot-fridge-cold-freezer pattern. Check the fan as described above — if it is not spinning, replacing the W10464673 motor will restore cooling to both compartments.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from ABS plastic and metal to match the electrical specifications and shaft dimensions of the original W10464673 evaporator fan motor.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
12002782 Refrigerator Genuine OEM Overload Relay Kit
Replaces Part Numbers: 12002782, 1194680, 61005518, AH2004057, EA2004057, OEM12028982, AP4009659, PS2004057.
Description: This is a Genuine OEM compressor overload and relay kit for Specific Whirlpool, Maytag, Kenmore Refrigerator models. Kit was recently redesigned by manufacturer.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
W11458345 Genuine OEM Washer Drain Pump - Compatible with Whirlpool, Maytag, Amana
Product Description
Restore your washer’s performance with the W11458345 Genuine OEM Washer Drain Pump. This Whirlpool-manufactured pump is designed as a replacement for select Whirlpool, Maytag, Amana, Inglis, and Kenmore washing machines. It efficiently drains wastewater during wash cycles and includes a large filter that can be cleaned monthly with Washing Machine Cleaner Tablets. This part addresses issues like water not draining, loud buzzing or grinding noises, or failure to enter agitation cycles, often caused by blockages, wear, or pump motor failure.
Note: Includes (1) drain pump assembly. Disconnect power before installation. Verify compatibility with your washer model.
Replaces part numbers: W11458345, W11316609, W10918608, W11319789, PD00062450, EAP16218041, AP6989186, PS16218041.
Compatibility:
Compatible with select washer models, including but not limited to:
Whirlpool: WFW862CHC3, WFW6620HW1, WFW6620HW2, WFW9620HC2, 8TWFW8620HW1
Maytag: MHW5630HW1, MHW5630HW3, 7MWFW5622HW2
Amana: NFW5800HW0
Kenmore: 110.42932200
Inglis: IFW5900HW0
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Amana, Inglis, and Kenmore washers.
🔧 Specifications: Genuine OEM Whirlpool drain pump, 120V, stainless steel construction.
💪 Reliable Performance: Efficiently drains wastewater for optimal washer operation.
🛠️ Easy Installation: Requires screwdriver, pliers, and nut driver; typically installed in 30–60 minutes.
🛡️ Effective Fixes: Resolves water not draining, buzzing/grinding noises, or agitation cycle issues.
Product Specification
Part Number: W11458345
Component Type: Washer drain pump assembly
Material: Stainless steel and plastic (Based on web:0, web:1, web:2, web:3, web:4, web:5, web:6, web:7, web:8, web:9, web:10, web:11, web:12, web:13, web:14, web:15)
Dimensions: Approximately 9.75" L x 9.5" W x 5.25" H (Based on web:0)
Weight: 3.32 lbs (Based on web:0)
Electrical Specs: 120V, submersible design (Based on web:0, web:2)
Compliance: UL-listed, Prop 65 warning for California (Based on web:0, web:1, web:2, web:3, web:4, web:5, web:6, web:7, web:8, web:9, web:10, web:11, web:12, web:13, web:14, web:15)
Installation Notes:
Safety First: Disconnect the washer from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your washer running smoothly today!
Add to cart now for a reliable fix!
XPARTCO DA32-10104N Refrigerator Temperature Sensor
The XPARTCO DA32-10104N is an aftermarket replacement refrigerator temperature sensor (thermistor) compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators. This sensor is mounted on or near the evaporator coil and continuously monitors the internal temperature of the refrigerator compartment, transmitting real-time readings to the electronic control board.
Based on the data received from the sensor, the control board regulates the compressor, evaporator fan motor, and defrost system to maintain the set temperature. When this sensor fails or drifts out of calibration, the control board receives inaccurate temperature readings — leading to a refrigerator that runs too cold, too warm, or triggers a 5E/SE error code. Features a 9-inch cord for easy installation and a sensitive thermal element with temperature detection accuracy of ±0.1°C.
Quick Answer
The XPARTCO DA32-10104N Refrigerator Temperature Sensor fixes refrigerators that are too warm, too cold, display a 5E/SE error code, or have inconsistent temperatures that spoil food. It monitors internal refrigerator temperature and sends data to the control board to regulate cooling. Compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators.
Common Problems This Part Fixes
Refrigerator running too warm — food spoiling faster than normal
Refrigerator running too cold — food or drinks freezing in the fresh food section
5E or SE error code displayed on the control panel
Inconsistent or fluctuating temperatures inside the refrigerator
Compressor running continuously without reaching set temperature
Excessive frost or ice buildup on evaporator coils
Replaces Part Numbers
This sensor directly replaces the following OEM and cross-reference part numbers:
DA32-10104N, DA32-10104V, 2030330, ASM1216617, PD00026468, EAP4138666, AP4979323, PS4138666.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This temperature sensor is compatible with select refrigerators from the following brands:
Samsung French door refrigerators
Samsung side-by-side refrigerators
Samsung bottom freezer refrigerators
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Monitors internal refrigerator temperature and sends real-time data to the electronic control board
Fixes 5E/SE error codes caused by a faulty or out-of-calibration temperature sensor
Temperature detection accuracy of ±0.1°C for precise cooling control
9-inch cord length for easy installation and connection to the control board
Aftermarket replacement built to OEM-equivalent quality standards
Direct drop-in replacement — no modification required
DIY-friendly repair — installs with basic hand tools in 30–45 minutes
Product Specifications
Part Number
DA32-10104N
Part Type
Refrigerator Temperature Sensor (Thermistor)
Condition
Aftermarket Replacement
Application
Refrigerator Temperature Control System
Cord Length
9 inches
Detection Accuracy
±0.1°C
Resistance at 70°F
~9.3K ohms
Resistance at 90°F
~7.7K ohms
Resistance at 100°F
~6.2K ohms
Resistance at 120°F
~4.3K ohms
Compatible Brands
Samsung
Installation Notes
⚠️ Safety First — Unplug Refrigerator Before Starting Unplug the refrigerator from the power source before beginning any repair. Safely remove and store any food that could deteriorate while the power is off. Wear work gloves to protect your hands. The DA32-10104N sensor is located near the evaporator coil, typically behind the rear panel inside the refrigerator or freezer compartment. Remove the panel, locate the sensor along the yellow wire, disconnect the old sensor from its plug, and connect the new sensor in the same position. Reassemble the panel and restore power. Allow 24 hours for the refrigerator to return to normal operating temperature. Tip: Before replacing, test the old sensor with a multimeter — resistance readings outside the values in the specs table above confirm a faulty sensor. Consult your refrigerator's service manual for model-specific instructions.
Frequently Asked Questions
Will the DA32-10104N fit my Samsung refrigerator?
This sensor is compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators. Use the model search above to verify your model, or contact our support team before ordering.
What does the temperature sensor do?
The temperature sensor (thermistor) continuously monitors the internal temperature of the refrigerator and sends readings to the electronic control board. The control board uses this data to regulate the compressor, fans, and defrost system to maintain the set temperature. When the sensor fails or drifts out of range, the control board receives inaccurate data and cannot maintain proper cooling.
What are signs that my temperature sensor needs replacement?
Common signs include: the refrigerator running too warm or too cold, food spoiling faster than normal, a 5E or SE error code on the display, inconsistent temperatures, or the compressor running continuously without reaching the set temperature.
How do I test the DA32-10104N sensor before replacing it?
Use a multimeter to measure the resistance across the sensor terminals. At 70°F the reading should be approximately 9.3K ohms, at 90°F approximately 7.7K ohms, at 100°F approximately 6.2K ohms, and at 120°F approximately 4.3K ohms. Readings significantly outside these values indicate a faulty sensor that needs replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is designed to deliver reliable, accurate temperature sensing at a more affordable price point.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine Refrigerator Replacement Part
DA97-12625A Refrigerator Genuine Auto-Close Lever
Genuine auto-close lever for select refrigerator door hinge and closure systems.
Product Overview
The DA97-12625A Refrigerator Auto-Close Lever is a genuine replacement part designed for compatible refrigerators. The lever works with the door hinge and closure mechanism to help guide the refrigerator door into the proper closed position.
Use this part when the original lever is cracked, worn, broken, loose, or no longer helping the door close correctly.
Quick Answer
DA97-12625A is a genuine refrigerator auto-close lever for compatible door closure assemblies. Replace it when the original lever is damaged or the door no longer closes and aligns as intended.
Common Problems This Part May Fix
Refrigerator door does not close smoothly
Door does not pull fully into the closed position
Auto-close action is weak or inconsistent
Lever is cracked, broken, or worn
Door alignment changes near the closed position
Replaces and Cross-References
DA97-12625A, DA97-13070A, 3527780, AP5620329, ASM32839, EAP4176636, PD00027974, PS4176636
Part number is provided for identification. This listing is for a genuine replacement part.
Compatibility
Fits select refrigerators that specify auto-close lever part number DA97-12625A.
Important: Verify the complete refrigerator model number, door position, and original lever part number before ordering. Similar-looking hinge and closure components may differ by model or door side.
Key Features
Genuine replacement part
Designed for compatible refrigerator door closure systems
Helps guide the door into the closed position
Supports proper door alignment near closing
Direct replacement for applications calling for DA97-12625A
Product Specifications
Part Number
DA97-12625A
Part Type
Refrigerator Auto-Close Lever
Application
Compatible Refrigerator Door Systems
Function
Assists door closing and alignment
Condition
New
Part Quality
Genuine Replacement Part
Package Quantity
1 Auto-Close Lever
Installation & Troubleshooting Notes
Disconnect refrigerator power before service.
Support the door if hinge or closure hardware must be loosened or removed.
Inspect the original auto-close lever for cracks, wear, deformation, or looseness.
Check nearby hinge and closure components for related wear or damage.
Install the replacement lever in the same position and orientation as the original.
Confirm the door opens, aligns, and closes smoothly before returning the refrigerator to normal use.
Diagnostic tip: A door that does not close correctly may also have worn hinges, loose mounting hardware, cabinet leveling issues, or gasket interference. Inspect the full door system before replacing only the lever.
Frequently Asked Questions
What does DA97-12625A do?
It works with the refrigerator door closure system to help guide the door into the proper closed position.
Is DA97-12625A a genuine part?
Yes. This listing is for a genuine refrigerator auto-close lever.
When should this lever be replaced?
Replace it if it is cracked, broken, excessively worn, loose, or no longer supporting proper door closing.
Will this fit every refrigerator?
No. Match the complete refrigerator model number, door position, and original part number before ordering.
Shop With Confidence
Verify your complete refrigerator model number before purchasing. Our compatibility team can help confirm whether DA97-12625A is correct for your appliance.
Genuine ReplacementDoor Closure PartModel Fitment SupportFast U.S. Shipping
241993101 Refrigerator Genuine OEM Front Crisper Cover Support
Replaces Part Numbers: 241993101, 1513082, 240423701, 7241993101, AH2358880, EA2358880, AP4427109, PS2358880.
Description: This Front Crisper Cover Support is a Genuine OEM replacement part for select Frigidaire models. Crafted with high-quality materials, this front crisper cover support is designed to provide long-lasting support for your crisper drawer. It's easy to install and comes with everything you need to get your refrigerator back in working order. It may need replacing if the shelf or the drawer is sagging or misaligned.
OE WR60X10220 Refrigerator Condenser Fan Motor
The OE WR60X10220 is an Original Equipment condenser fan motor for GE-built refrigerators, sourced from the same original manufacturer that supplies this motor for genuine GE production, and shipped in XPARTCO packaging rather than GE retail packaging. The condenser fan motor pulls air across the condenser coils and compressor to dissipate heat, and on many models it also helps evaporate condensate that collects in the drain pan below the compressor. When this motor fails or weakens, the compressor and coils can't shed heat properly, leading to a refrigerator that runs constantly, doesn't cool adequately, or develops a squealing/screeching noise as the motor bearings wear.
It directly replaces WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220. Located in the rear compressor compartment behind the refrigerator's rear access panel. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The OE WR60X10220 Refrigerator Condenser Fan Motor fixes GE, Hotpoint, RCA, and Kenmore (GE-built) refrigerators that run constantly, don't cool adequately, or make a squealing/screeching noise from the compressor compartment. This is an Original Equipment motor — same manufacturer as genuine GE production, packaged as XPARTCO rather than GE retail packaging. 115V. Replaces WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220. Classic symptom: loud squealing or screeching noise coming from behind the fridge.
Common Problems This Part Fixes
Refrigerator runs constantly and doesn't cycle off normally
Fridge or freezer not cooling adequately or running warm
Loud squealing, screeching, or grinding noise from the rear compressor compartment
Compressor overheating or shutting off on thermal protection
Water pooling under the refrigerator from an overwhelmed drain pan
Condenser fan blade not spinning, or spinning slowly/intermittently
What Is an OE Part?
OE ("Original Equipment") parts are sourced from the same original manufacturer that supplies the component for genuine factory production — not a different aftermarket maker. The difference from a "Genuine OEM" listing is packaging: an OE part ships in XPARTCO packaging instead of the appliance brand's retail box, at a lower cost, while the part itself comes off the same production line. OE is a separate designation from our XPARTCO aftermarket brand and is never labeled with an XPARTCO prefix.
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This condenser fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This condenser fan motor is compatible with a wide range of GE-built refrigerators from the following brands:
GE refrigerators (including GSL22JFPDBS-BS, GSS25WGPHBB, GSL25JFPHBS, and related side-by-side and bottom-freezer models)
Hotpoint refrigerators (GE-built models, including HSM25GFRFSA)
RCA refrigerators (GE-built models)
Kenmore refrigerators (select GE-built models)
Note: This motor is used across a large number of GE-platform refrigerator models. Always verify your appliance model number before ordering, since evaporator fan motors and condenser fan motors are different components that are easy to confuse — an evaporator fan sits inside the freezer compartment, while this condenser fan sits in the rear compressor compartment.
Key Features
Original Equipment condenser fan motor — same manufacturer source as genuine GE production
Resolves "runs constantly," "not cooling," and "squealing noise" symptoms caused by motor failure
Pulls air across the condenser coils and compressor to dissipate heat
Helps evaporate excess condensate collecting in the drain pan on many models
115V rated motor matching original electrical specifications
Replaces WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220
Compatible with GE, Hotpoint, RCA, and Kenmore refrigerators
Same production source as the genuine part, in XPARTCO packaging at a lower cost
Product Specifications
Part Number
WR60X10220-OE
OEM Part Number
WR60X10220
Part Type
Refrigerator Condenser Fan Motor
Condition
Original Equipment (OE) — XPARTCO Packaging
Voltage
115V
Location
Rear Compressor Compartment
Function
Cools condenser coils/compressor; assists drain pan evaporation
Compatible Brands
GE, Hotpoint, RCA, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power before beginning. Pull the refrigerator away from the wall and remove the rear access panel over the compressor compartment (typically several screws around the perimeter). Locate the condenser fan motor and blade near the compressor. Photograph the wiring before disconnecting. Unplug the motor's wiring harness connector. Remove the mounting screws or bracket clip holding the motor in place, and note the orientation of the fan blade on the motor shaft before removing it — the blade must be reinstalled facing the same direction to move air correctly. Transfer the fan blade to the new WR60X10220 motor, or install the blade included with your kit in the same orientation. Mount the new motor in the same position and secure it. Reconnect the wiring harness, matching your photos. Reinstall the rear access panel, restore power, and confirm the fan spins freely and the compressor area cools down normally after running. Tools needed: nut driver or screwdriver, needle-nose pliers (for wiring connectors).
Frequently Asked Questions
What's the difference between this OE part and a "Genuine OEM" listing?
Both come from the same original manufacturer as factory production — the difference is packaging and price. A Genuine OEM listing ships in the appliance brand's own retail box; this OE part ships in XPARTCO packaging at a lower cost, with no difference in the motor itself.
My fridge is making a loud squealing noise — is this the part I need?
Very likely, yes. A squealing or screeching noise from behind the refrigerator, especially one that gets louder over time, is one of the most common symptoms of a failing condenser fan motor as its bearings wear out. Pull the unit out and listen near the rear compressor compartment to confirm the noise is coming from that area before ordering.
Is this the same as an evaporator fan motor?
No — these are different components serving different purposes, and it's easy to order the wrong one. The evaporator fan motor is inside the freezer compartment and circulates cold air through the fridge and freezer. This condenser fan motor is in the rear compressor compartment and cools the compressor and condenser coils. Confirm which one your model uses based on symptoms and location before ordering.
Do I need to transfer the fan blade from my old motor?
On many models, yes — the fan blade is a separate component that mounts onto the motor shaft, and you'll transfer it from the old motor to the new one, noting its orientation first. Some kits include a new blade; check what's included with your specific motor before starting the repair.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Original Equipment Source ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W11224591 Refrigerator Evaporator Fan Motor
The XPARTCO W11224591 is an aftermarket replacement freezer evaporator fan motor assembly compatible with a wide range of Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore bottom-mount French door refrigerators. The evaporator fan motor is located in the freezer compartment behind the rear panel — it draws cold air across the evaporator coils and circulates it throughout both the freezer and the fresh food compartment. This constant air movement is what keeps temperatures even and food fresh. When the fan motor fails, the most common symptom is telling: the refrigerator (fresh food) compartment stops cooling while the freezer stays cold but doesn't reach full capacity, because the fan is no longer moving the cold air up into the fridge section.
This is a complete assembly that includes the fan motor, wiring harness, temperature sensor (thermistor), and defrost thermostat — everything integrated into one replaceable unit. Finished in white. As a direct replacement for the Whirlpool W11224591, it also replaces AP6329809, W10865431, W10728111, W11215582, 4844712, and PS12349521. Motor failure typically results from normal wear, obstruction from frost or debris rubbing the fan blade, or motor winding issues. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO W11224591 Refrigerator Evaporator Fan Motor fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, and Amana bottom-mount French door refrigerators where the fridge section is warm but the freezer is cold, temperatures are uneven, frost builds up on the coils, or unusual noise comes from the freezer compartment. Complete assembly — includes fan motor, wiring harness, temperature sensor, and defrost thermostat. White finish. Replaces AP6329809, W10865431, W10728111, W11215582, 4844712, PS12349521. Compatible with Whirlpool WRF757/WRF767/WRF736 series, KitchenAid KRFF507 series, Maytag MFT2574 series and related models.
Common Problems This Part Fixes
Refrigerator (fresh food) compartment warm while the freezer stays cold — the signature symptom of evaporator fan motor failure
Uneven or inconsistent temperatures throughout the refrigerator
Unusual noises from the freezer compartment — grinding, squealing, or clicking as the motor bearings fail or the blade rubs on frost/ice
Frost or ice buildup around the cooling sections and evaporator coils
Refrigerator running continuously or more frequently than usual to compensate for poor air circulation
Noticeable decrease in overall cooling efficiency
Food spoiling faster than normal in the fresh food compartment
Fan motor not spinning at all when the compressor is running
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This evaporator fan motor assembly directly replaces the following OEM and cross-reference part numbers:
W11224591, W10865431, 4844712, W10728111, W11215582, AP6329809, AWP43665, EAP11738038, FIX12349521, DLB5985WPEB, PD00052715, PS12349521.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select bottom-mount French door refrigerators from the following brands:
Whirlpool refrigerators — WRF757SDHV00, WRF757SDHZ00/Z01/Z02, WRF767SDHV00/V02, WRF767SDHZ00/Z01/Z02 series
Whirlpool refrigerators — WRF736SDAB14, WRF736SDAM14, WRF736SDAW14, 7WF736SDAM14 series
KitchenAid refrigerators — KRFF507HPS00/PS01/PS02, KRFF507HBS02, KRFF507HWH02 series
Maytag refrigerators — MFT2574DEH02 and related bottom-mount French door models
Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper refrigerators — select Whirlpool-built models
Kenmore / Sears and Ikea refrigerators — select Whirlpool-built models
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Complete evaporator fan motor assembly — includes fan motor, wiring harness, temperature sensor (thermistor), and defrost thermostat in one integrated unit
Circulates cold air from the evaporator coils throughout the freezer and fresh food compartments for even temperatures
Resolves the classic "fridge warm, freezer cold" symptom of evaporator fan failure
Prevents frost buildup by maintaining proper airflow across the coils
White finish, direct-fit replacement using original mounting points and connectors
Because the assembly bundles the defrost thermostat and temperature sensor, it addresses multiple potential failure points in a single repair
Replaces AP6329809, W10865431, W10728111, W11215582, 4844712, and PS12349521
Compatible with Whirlpool WRF757/WRF767/WRF736 series, KitchenAid KRFF507 series, Maytag MFT2574 series, plus Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea Whirlpool-built bottom-mount refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
W11224591
Part Type
Freezer Evaporator Fan Motor Assembly
Condition
Aftermarket Replacement
Application
Bottom-Mount French Door Refrigerators (Whirlpool platform)
Assembly Includes
Fan Motor, Wiring Harness, Temperature Sensor (Thermistor), Defrost Thermostat
Location
Freezer compartment, behind rear panel
Color
White
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, Ikea
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor is located in the freezer compartment behind the rear access panel. Remove all freezer shelves, drawers, and the ice maker (if equipped) to clear access to the back wall. If there's frost or ice buildup on the rear panel or coils, allow the freezer to thaw completely before continuing — never chip or pry ice off the evaporator coils, as the aluminum fins damage easily. Remove the screws securing the rear freezer access panel and lift it away to expose the evaporator coils and fan motor assembly. Photograph the wiring harness connections and the fan motor orientation before disconnecting anything. Disconnect the wire harness connectors from the old assembly and release it from its mounting points. Lift out the old fan motor assembly. Install the new W11224591 assembly using the original mounting points and connectors — since this is a complete assembly, the fan motor, harness, temperature sensor, and defrost thermostat all transfer as one unit. Reconnect the wiring harness, matching your photos. Confirm the fan blade spins freely by hand without rubbing on any surrounding surface. Reinstall the rear access panel, shelves, drawers, and ice maker. Plug the refrigerator back in and allow several hours for the unit to return to its set temperature before reloading with food. Test airflow and temperature consistency before considering the job complete. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves.
Frequently Asked Questions
My refrigerator section is warm but the freezer is still cold — is this the fan motor?
This is the single most common and telling symptom of a failed evaporator fan motor on these bottom-mount French door refrigerators. Here's why: the evaporator coils (which produce the cold) are in the freezer, and the evaporator fan is what pushes that cold air up into the fresh food compartment. When the fan motor fails, the freezer stays cold (it's right next to the coils) but the fridge section warms up because no air is being circulated to it. If your freezer is cold and your fridge is warm, the evaporator fan motor is the prime suspect. You can confirm by listening for the fan running when the compressor is on, or opening the freezer rear panel to see if the fan spins.
What's included with this part — is it just the motor?
This is a complete assembly, not just the bare motor. It includes the fan motor, the wiring harness, the temperature sensor (thermistor), and the defrost thermostat — all integrated into one unit. This is actually an advantage: since these components live together in the freezer compartment and can each cause cooling problems, replacing them as a bundle addresses multiple potential failure points in a single repair, reducing the chance you'll be back in the freezer compartment a few months later for a related part.
Why is my evaporator fan making noise?
A noisy evaporator fan usually means one of two things: the motor bearings are wearing out (producing grinding or squealing), or the fan blade is rubbing against frost or ice that has built up around it. If frost buildup is the cause, that often points to a secondary problem with the defrost system (defrost heater, thermostat, or control) allowing ice to accumulate where it shouldn't. Since this replacement assembly includes a new defrost thermostat, it addresses one of the common defrost-related causes. If heavy frost keeps returning after replacement, the defrost heater or control board should be investigated next.
Do I need to defrost the freezer before installing this?
If there's frost or ice buildup on the rear freezer panel or evaporator coils, yes — clear it before installing the new assembly. Leave the freezer empty and unplugged with the door open for several hours (longer for heavy ice) to let everything thaw naturally, placing towels at the base to catch melt water. Never chip or pry ice off the evaporator coils with a tool — the aluminum fins are delicate and a damaged coil is a far more expensive repair. Once everything is fully thawed and dried, proceed with the fan motor replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the fit, mounting points, connector configuration, and function of the original W11224591 evaporator fan motor assembly used in compatible Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore bottom-mount French door refrigerators — including the integrated harness, temperature sensor, and defrost thermostat.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine GE OEM Part
GE WR55X36435 Refrigerator Genuine OEM Inverter Board
Compressor inverter/control board for select GE refrigerator platforms.
Product Overview
The GE WR55X36435 Refrigerator Inverter Board is a Genuine GE OEM replacement part designed for compatible GE refrigerators.
The inverter board supplies and controls electrical power to the variable-speed compressor, allowing the refrigerator control system to regulate compressor operation for proper cooling performance.
Quick Answer
WR55X36435 is a Genuine GE OEM refrigerator compressor inverter board. It replaces WR55X31991 and WR87X32289 on compatible models. Always verify the full refrigerator model number before ordering because inverter boards are model-specific electronic controls.
Common Problems This Part May Fix
Compressor does not start
Refrigerator is not cooling properly
Compressor starts and stops unexpectedly
Intermittent cooling caused by inverter failure
Diagnostic fault related to compressor drive/control
Replaces and Cross-References
WR55X36435, WR87X32289, WR55X31991, AP6980849, AP7176581, EAP16660026, AGE29171, OEM21529752, PD00078524, PS16660026
Cross-reference numbers are for identification. Verify your exact appliance model before purchase.
Compatibility
Designed for select GE bottom-mount and French-door refrigerator platforms. Compatible model examples include:
CVE28DP3NBD1
CVE28DP4NBW2
CVE28DM5NBS5
PVD28BYNCFS
PVD28BYNFS
PGD29BYTBFS
PGD29BYTCFS
CGE29DP2TBS1
CXE22DP2PBS1
Important: This is only a partial compatibility list. Inverter boards can look similar while using different firmware, connectors, or compressor specifications. Confirm the complete model number before ordering.
Key Features
Genuine GE OEM replacement part
Controls/supplies power to the compressor
Replaces WR55X31991 and WR87X32289
Factory-designed electrical connectors and mounting
For select GE refrigerator platforms
Product Specifications
Manufacturer Part Number
WR55X36435
Brand
GE Appliances
Part Type
Refrigerator Compressor Inverter Board
Condition
New
Part Quality
Genuine OEM
Primary Function
Supplies and controls power to the compressor
Approx. Shipping Weight
0.65 lb
Package Quantity
1 Inverter Board
Installation Notes
Unplug the refrigerator before service.
Protect perishable food while power is disconnected.
Verify the exact appliance model and original inverter part number.
Document wiring and connector locations before removal.
Inspect the compressor harness, connectors, and related wiring for heat damage or corrosion.
Install the replacement in the original mounting location and reconnect all plugs fully.
Reassemble all covers before restoring power.
Electronic diagnostic note: A no-start compressor can also be caused by the compressor itself, main control board, wiring, sensors, or supply-voltage problems. Diagnose the system before replacing the inverter board.
Frequently Asked Questions
Is WR55X36435 a Genuine GE OEM part?
Yes. WR55X36435 is a Genuine GE Appliances inverter board.
Does it replace WR55X31991?
Yes. WR55X31991 is a previous part number replaced by WR55X36435 on compatible models.
Does it replace WR87X32289?
Yes. WR87X32289 is also a previous part number replaced by WR55X36435 on compatible models.
What does the inverter board do?
It supplies and controls electrical power to the refrigerator compressor so the cooling system can operate at the commanded speed and load.
Will this fit every GE refrigerator?
No. Verify the complete model number because compressor inverter boards are model-specific.
Shop With Confidence
Use the complete refrigerator model number to confirm fitment before purchase. Genuine OEM electronics are designed for the specific electrical and compressor requirements of compatible GE models.
Genuine GE OEMCompressor InverterCompatibility SupportFast U.S. Shipping
