WPW10547292 Genuine OEM Whirlpool Dryer Idler Pulley
The WPW10547292 is a genuine Whirlpool OEM idler pulley assembly for Whirlpool, Maytag, and Kenmore dryers. This pulley sits to the left of the motor, just below the drum belt, and its job is to ride against the belt and keep constant tension on it as the motor turns — without that tension, the belt would sag, slip on the motor pulley, and fail to reliably turn the drum. The pulley wheel itself spins freely on a bearing mounted to a bracket, so as the belt moves, the pulley spins along with it under light load.
Over time, the bearing inside the pulley wheel wears out, causing it to spin roughly, seize partially, or bind up entirely instead of turning freely. When that happens, the belt drags against a pulley that should be spinning smoothly with it, generating friction, heat, and noise. A worn idler pulley produces a very recognizable symptom: a persistent squeaking or squealing sound during operation that often gets more noticeable over time, and in more advanced cases, a drum that struggles to spin or doesn't spin at all, or a burning smell as the seized pulley drags against the belt. It directly replaces W10547292, WPW10547292VP, AP6022817, 8547160, PS11756154, and LP16246.
Quick Answer
The WPW10547292 Genuine OEM Whirlpool Dryer Idler Pulley fixes Whirlpool, Maytag, and Kenmore dryers with a persistent squeaking or squealing noise during operation, a drum that struggles to spin, or a burning smell from a seized pulley dragging against the belt. Mounts to the left of the motor, below the belt. Replaces W10547292, WPW10547292VP, AP6022817, 8547160, PS11756154, LP16246. Consider replacing the drum belt (8544742/WP8544742) at the same time — a seized idler pulley is a common cause of premature belt wear, and you'll already have the cabinet open.
Common Problems This Part Fixes
Persistent squeaking or squealing noise during operation
Noise that gradually gets louder or more frequent over time
Drum that struggles to spin, spins intermittently, or won't spin at all
Burning smell coming from inside the dryer cabinet
Pulley wheel that feels stiff, gritty, or seized when checked by hand
Drive belt showing premature wear or fraying from dragging against a bound-up pulley
Noise that stops and starts depending on drum rotation or load size
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer idler pulley directly replaces the following OEM and cross-reference part numbers:
WPW10547292, W10547292, WPW10547292VP, AP6022817, 8547160, EAP11756154, PS11756154, AWP50878, PD00003590, LP16246
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This idler pulley is compatible with select Whirlpool, Maytag, and Kenmore dryers, including model numbers such as:
Whirlpool: WED7300XW0, WED7800XB0, WED8100BW0, WED8500BC0, WED8500BR0, WED8500BW0, WED8600YW0, WED8600YW1, 7MWGD7800XW0, 7MWGD8800AW0, 7MWGD8800AW1
Whirlpool (Y-prefix): YWED8000BW0, YWED8100BW0, YWED8200YW2, YWED8400YW2, YWED8500BC0, YWED8500BW0, YWED8800YC2, YWED8800YW2, YWED8900BC0, YWED8900BW0, YMEDB980BW0
Maytag: 7MMGDB850WL0, 7MMGDB950AG0, MEDB200VQ1, MEDB725BW0, MEDB800VB0, MEDB850WL1, MEDB850WR1
Kenmore: 110.78102310, 11067032600, 11067032601, 11067042600, 11067042601, 11067052600, 11067062600, 11067072600, 11067082600, 11067086600
Note: Whirlpool uses several different idler pulley designs across its dryer lineup, and they are NOT interchangeable. This WPW10547292 pulley is a separate part from the W10837240 pulley (used on Cabrio, Duet, and Bravos XL platforms) and the 279640 pulley (an older, differently-shaped design). Fitting the wrong pulley can result in a bracket that doesn't mount correctly or a wheel that doesn't align with your belt. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which pulley fits your dryer.
Key Features
Genuine Whirlpool OEM part — factory-specified bearing and bracket design
Maintains constant tension on the drive belt so it can turn the drum smoothly
Resolves "squeaking or squealing noise," "drum won't spin," and "burning smell" symptoms caused by a worn or seized pulley bearing
Complete wheel-and-bracket assembly — no need to source parts separately
Direct drop-in replacement — mounts to the original bracket position with the same bolt
Replaces W10547292, WPW10547292VP, AP6022817, 8547160, PS11756154, and LP16246
Compatible with Whirlpool, Maytag, and Kenmore dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WPW10547292
Part Type
Dryer Idler Pulley Assembly (Wheel + Bracket)
Condition
Genuine OEM
Brand
Whirlpool
Location
Left of the motor, below the drum belt
Function
Maintains tension on the drive belt as it turns the drum
Fuel Type
Electric and gas dryers
Companion Part
8544742 / WP8544742 drum belt (check/replace if pulley failed)
Repair Difficulty
Medium — requires some disassembly
Quantity
1 idler pulley assembly
Compatible Brands
Whirlpool, Maytag, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — On Gas Models, Shut Off The Gas Supply Too Disconnect power at the outlet or shut off the circuit breaker before beginning. On a gas dryer, also close the gas shutoff valve before moving the cabinet. Wear work gloves. Remove the lint filter, then remove the screws along the top edge of the front panel and take the panel off. With the front open, locate the belt tensioner pulley — it sits to the left of the motor, just below the belt. Use a socket wrench with an extension to loosen the pulley's mounting bolt, then remove the old pulley assembly, releasing the belt from it as you go. Slide the new WPW10547292 assembly onto the mounting post, making sure the grooves line up correctly so the belt seats snugly against the wheel, then re-tighten the mounting bolt securely. Before closing everything up, spin the new pulley by hand to confirm it turns freely with no grinding or resistance, and inspect the belt for wear, glazing, or fraying — replace it as well if it shows any of these signs, since a worn belt will quickly wear out even a brand-new pulley. Reinstall the front panel and its screws, restore power, and run a short empty cycle listening for the squeak to confirm it's resolved. Tools needed: 1/4" nut driver, 3/8" socket wrench with extension, Phillips screwdriver, work gloves.
Frequently Asked Questions
My dryer squeaks constantly. Is this definitely the idler pulley?
It's one of the most common causes of a persistent squeak, especially if the noise is steady and present throughout the cycle rather than only at certain moments. The pulley's internal bearing wears out over years of use, and a worn bearing produces exactly this kind of ongoing squeal as it spins roughly instead of smoothly. If you can access the pulley and spin it by hand, feeling any grinding or stiffness confirms the diagnosis.
Is this a hard repair, or can I do it myself?
It's a moderate repair — you'll need to remove the front panel and access the area behind the motor, which some customers describe as needing to "pull the entire dryer apart" to reach the pulley. It's very doable with basic hand tools and some patience, but budget more time than a simple part swap, and expect to use a socket wrench with an extension to reach the mounting bolt in that tighter space.
Should I replace the belt while I'm already in there?
It's worth strongly considering. A seized or dragging pulley puts extra wear on the belt, so if your pulley failed from being seized rather than just noisy, the belt may already be showing damage. Since you'll already have the cabinet open and the belt exposed, inspecting it — and replacing it if it shows glazing, cracking, or fraying — saves you from repeating this same teardown again soon after.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original bearing design, bracket shape, and mounting configuration of the idler pulley assembly originally installed in your Whirlpool, Maytag, or Kenmore dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 137221600 Washer Drain Pump
The XPARTCO 137221600 is an aftermarket replacement washer drain pump compatible with a wide range of Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse front-load washers — including popular Affinity series and washer-dryer combo models. The drain pump is mounted at the base of the washer and is responsible for evacuating the wash and rinse water from the tub through the drain hose at the end of each cycle. When the drain pump fails, the washer can't drain — leaving clothes soaking wet, water pooling in the tub, and the wash cycle unable to advance to spin. Common failure symptoms include humming without pumping (blocked or seized impeller), leaks from the pump housing, loud grinding or clicking noises, and complete pump silence when a drain cycle should be running.
Rated 120V AC, 60Hz, 85W, 1.25A. Based on the Askol M65 design, with a firmly attached red flapper to prevent drain backflow into the tub. Constructed from strong, durable plastic to resist cracking and leaking through many years of cycling. Package includes the drain pump, mounting base, and mounting screw. This part directly replaces 137108100, 137151800, 137151800KITK, 131724000, 134051200, 134740500, 134740800, 2754548, ER137108100, TJ137108100, EAP7783938, LP1600, BPX401-72J, AP5684706, and PS7783938. Important: before installing the new pump, clean any lint or debris from the rubber boot, verify the drain hose is clear and properly fastened, and check the pump filter for blockage — installing a new pump on a system with the underlying blockage will not resolve the drainage problem. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The XPARTCO 137221600 Washer Drain Pump fixes Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse front-load washers that won't drain, leave clothes soaking wet, are noisy or humming during the drain cycle, or display an E11 error code. 120V AC, 60Hz, 85W, 1.25A. Askol M65 design with red backflow flapper. Kit includes pump + mounting base + screw. Replaces 137108100, 137151800, 137151800KITK, 131724000, 134051200, 134740500, 134740800, 2754548, ER137108100, TJ137108100, EAP7783938, LP1600, BPX401-72J, AP5684706, PS7783938.
Common Problems This Part Fixes
Washer not draining — pump failed to remove water at the end of the wash or rinse cycle
Clothes left soaking wet at the end of the cycle — no drain, so no spin can start
Water leaking from the bottom of the washer — cracked pump housing or failed seal
Loud humming noise but no water flowing — pump motor running against a seized impeller or blockage
Grinding, clicking, or unusual noises during the drain cycle
E11 error code displayed on the control panel (drain fault)
Washer pumps but won't spin — drain cycle can't complete, blocking spin
Cycles taking much longer than normal as the washer tries to drain
Pump silent during drain — motor windings open or electrical fault
Impeller broken, cracked, or missing pieces after opening the pump
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drain pump directly replaces the following OEM and cross-reference part numbers:
137221600, 131724000, 134051200, 134740500, 137108100, 137151800, 137151800KITK, 2754548, TJ137108100, ER137108100, PD00000118, EAP7783938, BPX401-72J, AFR14249, AP5684706, PS7783938, Also replaces GE WH23X10041, 2119312, WH23X10009, WH23X10017, WH23X10031, WH23X10034, AH3502779, EA3502779, AP5324214, PS3502779.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain pump is compatible with select front-load washers and washer-dryer combos from the following brands:
Frigidaire front-load washers — Affinity series (FAFW3001LW3, FAFW3801LW3 and related), FEX831FS2/FS4, FTF2140ES1, FWS445RFS2, FWX445RFS3 series
Frigidaire front-load washers — ATF6000ES1, ATF8000FS1, ATFB6700FS0 series
Frigidaire front-load washers — GLTF2940ES3, GLTF2940FS1 and related GLTF series
Frigidaire washer-dryer combos — CWS3600AS1 and related
Electrolux front-load washers — select models
Crosley front-load washers — select models
Gibson front-load washers — select models
Kelvinator front-load washers — select models
Kenmore / Sears front-load washers — select Frigidaire-built models (41744052400, 41744052401, 41744052500, 41744082500, 41748102700, 41748106700, 41748116700, 41790812995 and related 417-series)
Tappan front-load washers — select models
Westinghouse front-load washers — select models
Note: The redesigned 137221600 may look slightly different from your original (e.g., white or gray housing vs. original black), but functions identically. Ensure proper orientation and flapper alignment during installation. Always verify your appliance model number before ordering.
Key Features
Aftermarket replacement built to OEM-equivalent quality standards
Drain pump — removes water from the washer tub through the drain hose at the end of the wash and rinse cycles
Resolves "won't drain," "won't spin," "wet clothes," "E11 error," and "humming pump" symptoms
120V AC, 60Hz, 85W, 1.25A — correct electrical specifications for compatible Frigidaire-platform washers
Askol M65 design with red backflow flapper to prevent water from flowing back into the tub
Strong, durable plastic construction resistant to cracking and leaking
Kit includes: 1x drain pump, 1x mounting base, 1x mounting screw
Replaces 15+ OEM and cross-reference part numbers including 137108100, 137151800, 131724000, 134051200, 134740500, 134740800, AP5684706, and PS7783938
Compatible with Frigidaire (Affinity, FEX, FTF, FWS, FWX, ATF, ATFB, GLTF, CWS series), Electrolux, Crosley, Gibson, Kelvinator, Kenmore (417-series), Tappan, and Westinghouse front-load washers and washer-dryer combos
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
XP137221600
Part Type
Washer Drain Pump
Condition
Aftermarket Replacement
Application
Front-Load Washers and Washer-Dryer Combos (Frigidaire/Electrolux platform)
Voltage
120V AC
Frequency
60 Hz
Wattage
85W
Amperage
1.25A
Design
Askol M65 with red backflow flapper
Material
Durable plastic
Includes
1x Drain Pump, 1x Mounting Base, 1x Mounting Screw
Error Codes Resolved
E11 (drain fault)
Compatible Brands
Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Kenmore, Tappan, Westinghouse
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Work Gloves — Check for Blockage First Disconnect power at the outlet or breaker and shut off both water supplies at the wall before beginning. Wear work gloves to protect your hands — pump components can have sharp edges. Have towels ready — residual water remains in the pump housing and hoses. Important: before replacing the pump, check for the underlying cause of the drain problem. Inspect the pump filter (accessible on many models via the lower front kick panel), the drain hose for kinks, and the rubber boot at the bottom of the tub for lint, coins, buttons, or other debris — installing a new pump on a system with an unresolved blockage will not fix the drain problem. Remove the appropriate access panel (typically the rear or front lower kick panel — model-dependent) to expose the pump. Photograph the wire harness and hose connections before disconnecting. Disconnect the electrical wire connectors from the pump motor. Squeeze the hose clamps with pliers and slide them back to release the tub-to-pump hose and the pump-to-drain-hose from the pump. Remove the 2 mounting screws holding the pump to its base and lift the old pump out. Clean any residual debris from the rubber boot, hoses, and pump filter area. Install the new 137221600 pump using the included mounting base and screw. Reconnect the hoses with the clamps, orient the red backflow flapper correctly, and reconnect the electrical connectors. Reinstall the access panel, restore water and power, and run a rinse cycle to test drainage and check for leaks at all connections. Tools needed: Phillips screwdriver, needle-nose pliers, channel-lock pliers, small flathead screwdriver, towel, work gloves.
Frequently Asked Questions
My washer won't drain — is it always the pump?
Not always. Before replacing the pump, check for these common causes: 1) Clogged pump filter — most Frigidaire front-load washers have a filter accessible via the lower front kick panel; coins, buttons, lint, and small items can block it. 2) Kinked or clogged drain hose — inspect the entire drain hose from the pump to the wall standpipe or sink. 3) Blocked rubber boot — small items can get stuck between the tub and the pump inlet. 4) Failed lid lock/door switch — if the washer doesn't detect a locked door, it won't run the drain cycle. If all of these check out and the pump still isn't draining (or is humming without moving water), the pump has failed and this is the correct repair.
What is the E11 error code on my Frigidaire washer?
E11 on Frigidaire and Electrolux front-load washers indicates a drain fault — the control board is not detecting successful drainage within the expected time. Common causes are a failed drain pump, a clogged pump filter, a kinked or clogged drain hose, or debris blocking the impeller. If you've verified the filter and hose are clear but the code persists, replacing the 137221600 drain pump typically resolves it. If the code returns after replacement, check the wire harness between the pump and the control board.
Does the pump come with everything I need for installation?
Yes — the 137221600 (OE) package includes the drain pump itself, a mounting base, and a mounting screw. This is everything you need for the pump replacement itself. However, you should reuse the original hose clamps and hoses from your old pump (they should still be in good condition). If you find that the rubber boot at the base of the tub is cracked, hardened, or torn during the repair, that's a separate part that would need to be ordered — inspect it before completing the reinstallation.
The new pump looks different from my old one — is it the right part?
Very likely, yes. The 137221600 has been through several revisions over its production history — some housings are black, others white or gray, and the exact shape can vary slightly across production runs. As long as the mounting bolt pattern, hose inlet/outlet sizes, and electrical connector are the same, and the specs match (120V, 60Hz, 85W, Askol M65 design), the pump will function identically to your original. During installation, focus on correct orientation and flapper alignment — the flapper (red) must be positioned so it opens outward toward the drain hose direction to prevent backflow.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Frigidaire/Electrolux OEM part, but is manufactured to match the electrical specifications (120V AC, 60Hz, 85W, 1.25A), Askol M65 design, red backflow flapper, dimensions, and drain pump function of the original 137221600 used in compatible Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse front-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WP389140 Genuine OEM Whirlpool Washer Drive Block
The WP389140 is a genuine Whirlpool OEM drive block for large-capacity belt-drive and direct-drive top-load washers. This is a purely mechanical coupling component: it connects the inner spin basket to the transmission's drive shaft, so that when the transmission turns, the basket turns with it. Without a properly seated drive block, the connection between the motor's rotational power and the basket is lost or unreliable, even though every electrical component in the washer may be working perfectly.
Measuring approximately 2-5/16" high, this drive block is a wear component subject to gradual mechanical stress every time the washer agitates or spins. A worn or failed drive block produces a distinctive set of symptoms: the basket may spin freely without properly engaging, the washer may spin slowly and leave clothes excessively wet, or you may hear a loud knocking or banging noise during operation as the connection between the basket and drive shaft becomes loose or worn. It directly replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, and 2858.
Quick Answer
The WP389140 Genuine OEM Whirlpool Washer Drive Block fixes Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis top-load washers with a basket that spins freely without engaging, slow spinning that leaves clothes excessively wet, or loud knocking/banging noise during operation. Approximately 2-5/16" high. For large-capacity belt-drive and direct-drive washers. Replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, 2858. This repair typically requires a spanner wrench to remove a large securing nut — budget for the right tool before starting.
Common Problems This Part Fixes
Washer basket spins freely without properly engaging during the wash or spin cycle
Washer spins slowly, leaving clothes excessively wet at the end of a cycle
Loud knocking or banging noise during operation
Washer shakes or moves noticeably during spin
Basket continues spinning after the cycle should have stopped
Inefficient wash and spin cycles overall due to poor basket engagement
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drive block directly replaces the following OEM and cross-reference part numbers:
WP389140, 389140, 357782, 97360, PD00002363, EAP11741977, WP389140VP, AP6008836, AWP47839, J27-936, PS11741977.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive block is compatible with select Whirlpool large-capacity top-load washers (belt-drive and direct-drive), and also fits select Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis washers built on the Whirlpool platform, including model numbers such as:
NTW4516FW, NTW4516FW3, NTW4516FW4
WTW4816FW2, WTW4816FW3
RTW4516FW, NTW4605EW, WTW4800BQ
Note: Always verify your full model number before ordering, since Whirlpool uses different drive block designs across its washer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified fit for a secure basket-to-transmission connection
Connects the inner spin basket to the transmission's drive shaft
Resolves "basket spins freely," "slow spin, clothes too wet," and "loud knocking noise" symptoms caused by drive block wear
Approximately 2-5/16" high
Designed for large-capacity belt-drive and direct-drive washer platforms
Direct drop-in replacement matching the original fit onto the spin tube notches
Replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, and 2858
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WP389140
Part Type
Washer Drive Block
Condition
Genuine OEM
Brand
Whirlpool
Application
Large-Capacity Belt-Drive and Direct-Drive Top-Load Washers
Height
Approx. 2-5/16 in.
Function
Connects the inner spin basket to the transmission drive shaft
Related Component
Drive cam (commonly inspected/replaced during the same repair)
Repair Difficulty
Moderate — spanner wrench and washer disassembly required
Quantity
1 drive block
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, Inglis
Installation Notes
⚠️ Unplug Washer And Shut Off Water Supply Before Starting — Spanner Wrench Required Disconnect power at the outlet or shut off the circuit breaker, and shut off the hot and cold water supply valves before beginning. Wear work gloves. Remove the washer's top and control console per your model's service instructions to access the inner tub assembly. Remove the agitator and any hardware securing the basket, which typically includes a large center nut — a spanner wrench is required to remove this nut, along with a socket and long extension for other fasteners; expect to remove a fair number of components to fully access the drive block. Lift the wash basket out to expose the drive block, which sits on the spin tube near the center of the transmission. Photograph the orientation of the old drive block and any surrounding hardware before removing it. Lift the old drive block free, and while it's accessible, inspect the drive cam nearby for wear as well, since it's commonly replaced at the same time. Slide the new WP389140 drive block into position, making sure it seats fully onto the spin tube notches, and reassemble the basket, hardware, agitator, console, and top panel in reverse order. Restore water and power, then run a test cycle through both wash and spin to confirm the basket engages properly with no unusual noise. Tools needed: multi-screwdriver, spanner wrench, socket set with long extension, work gloves.
Frequently Asked Questions
My washer basket spins freely and doesn't seem connected to anything. Is this the drive block?
Yes, this is the classic symptom of a failed drive block. Since this component is the mechanical link between the transmission's drive shaft and the inner spin basket, once it wears out or fails, the basket can spin independently without properly engaging, even though the motor and transmission are working normally.
Do I really need a spanner wrench for this repair?
Yes, on most models. Accessing the drive block requires removing a large nut that secures the basket assembly, and this nut is specifically designed to be removed with a spanner wrench rather than a standard socket. Trying to remove it without the correct tool risks damaging the nut or the surrounding components, so it's worth having one on hand before you start.
Should I replace the drive cam at the same time?
It's worth inspecting while you have the assembly open, since the drive cam sits in the same area and is commonly replaced alongside the drive block when a technician is already this far into the repair. If it shows visible wear, replacing both at once saves you from repeating this same teardown again soon after.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original dimensions and fit of the drive block originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DC93-00634A Dryer Idler Pulley
The XPARTCO DC93-00634A is an aftermarket replacement idler pulley assembly compatible with a wide range of Samsung dryers. The idler pulley rides against the drive belt and keeps it under proper tension as it wraps around the drum and motor pulley. Over time, the pulley wheel can wear, crack, or seize on its shaft, or the spring-loaded tensioner arm can bend or break, causing the belt to lose tension.
When this part fails, the dryer commonly won't spin at all even though the motor runs, makes a loud noise from the drive area, or the belt goes slack and starts slipping. It directly replaces DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601. Installs in 30 minutes to 2 hours depending on how much disassembly your model requires.
Quick Answer
The XPARTCO DC93-00634A Dryer Idler Pulley fixes Samsung dryers that won't spin the drum even though the motor runs, make a loud noise from the drive belt area, or have a loose/slipping belt. Replaces DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601. Classic symptom: motor hums and runs, but the drum doesn't turn — "no spin, no start."
Common Problems This Part Fixes
Dryer motor runs but the drum doesn't spin ("no spin, no start")
Loud noise or rattling coming from the drive belt/motor area
Drive belt slipping, loose, or off-track
Visible cracks, wear, or seizing on the pulley wheel
Bent or broken tensioner arm/spring
Squeaking noise from the pulley as it rotates
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This idler pulley directly replaces the following OEM and cross-reference part numbers:
DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This idler pulley is compatible with a wide range of Samsung dryers, including:
Samsung DV337AEG/XAA-0000
Samsung DV45H7000EW/A2-0000
Samsung DV45K6200EZ/A3
Samsung DV203AEW/XAA-0000, DV203AGS, and related models
Note: This idler pulley is specific to the Samsung drive belt platform and does not fit LG, Whirlpool, GE, or other brands, which use different pulley designs. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Direct-fit replacement Samsung dryer idler pulley assembly
Resolves "no spin, no start," "loud noise," and "loose/slipping belt" symptoms
Maintains proper belt tension as the belt wraps around the drum and motor pulley
Spring-loaded tensioner arm matches original design for correct belt tension
Replaces DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601
Compatible with a wide range of Samsung dryer models
Aftermarket replacement built to OEM-equivalent quality standards
Exact-fit design — no modification needed for installation
Product Specifications
Part Number
XPDC93-00634A
OEM Part Number
DC93-00634A
Part Type
Dryer Idler Pulley Assembly
Condition
Aftermarket Replacement
Function
Maintains drive belt tension
Application
Samsung Dryer Drive Belt System
Compatible Brand
Samsung
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power before beginning. Remove the front panel and/or top panel as needed to access the drum and drive belt (access point varies by model). Photograph the belt routing before removing anything. Relieve tension on the drive belt by pressing the idler pulley toward the motor, then slip the belt off the pulley and motor shaft. Remove the mounting screw or clip holding the idler pulley bracket in place and remove the old pulley assembly. Install the new DC93-00634A pulley in the same position and secure it. Route the new belt back around the drum and motor pulley, using the idler pulley to apply tension, matching your photos of the original routing. Reassemble any panels removed for access, restore power, and run a test cycle to confirm the drum spins smoothly and quietly. Tools needed: Phillips or nut driver, putty knife (for panel clips, if applicable).
Frequently Asked Questions
My dryer's motor runs but the drum won't spin — is this the part?
This is the classic "no spin, no start" symptom of a failed idler pulley or a broken drive belt. If the pulley wheel is cracked, seized, or the tensioner arm is bent or broken, the belt loses tension and can no longer transfer power from the motor to the drum. Inspect the belt for damage as well, since a broken belt often accompanies a worn idler pulley.
Do I need to replace the drive belt at the same time?
Not necessarily, but it's worth inspecting closely while you have the drum accessible. If the idler pulley failed due to age or wear, the belt has often experienced similar stress and may be worn, glazed, or close to failing itself. Many technicians replace both together to avoid a repeat repair.
Will this fit my LG or Whirlpool dryer?
No — this idler pulley is specific to the Samsung drive belt platform. LG, Whirlpool, GE, and other brands use different idler pulley and belt tensioning designs that are not interchangeable with this part. Confirm your appliance model number before ordering.
How long does this repair typically take?
Most installers report 30 minutes to 2 hours depending on how much disassembly your specific model requires to access the belt and pulley. Front panel removal is usually the more time-consuming part; the pulley swap itself is quick once accessed.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
AEB73764520 Genuine OEM LG Refrigerator Fan Grille Assembly
The AEB73764520 is a genuine LG OEM fan grille assembly for LG refrigerators. This grille sits around the evaporator fan, holding and directing the air the fan pushes so cold air is guided evenly throughout the refrigerator and freezer compartments rather than dispersing unevenly right at the fan. It also serves a protective role, shielding the spinning fan blade from accidental contact while still allowing full, unrestricted airflow through its vents.
Made of durable plastic, this grille can crack, warp, or break over time from the cold temperature cycling inside the freezer compartment, or from accidental impact during cleaning or organizing frozen food. A damaged grille typically shows up as uneven cooling or airflow within the compartment, since air isn't being properly guided and distributed, or in cases of significant damage, a fan blade that's no longer adequately shielded. Because parts that look similar can have small but meaningful differences in size and shape, it's important to confirm this exact part number matches your refrigerator before ordering, rather than relying on general appearance.
Quick Answer
The AEB73764520 Genuine OEM LG Refrigerator Fan Grille Assembly fixes LG refrigerators with a cracked, warped, or broken fan grille causing uneven cooling or airflow, or where the fan is no longer properly shielded. Genuine LG replacement part. Parts that look similar can have small but meaningful size and shape differences — always verify your exact model number before ordering.
Common Problems This Part Fixes
Uneven cooling or airflow within the refrigerator or freezer compartment
Visible cracks, warping, or breakage in the grille around the evaporator fan
Fan blade no longer adequately shielded due to grille damage
Grille that has come loose or won't seat securely in place
Reduced airflow efficiency affecting overall cooling performance
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
AEB73764520, 4952727, ALG53451, AP6873098, EAP12714296, PS12714296, PD00069980.
We were not able to confirm additional cross-reference or superseding part numbers for this specific part from reliable sources at the time this page was built, so none are listed here rather than guessed. If you have a cross-reference number for your appliance, contact our support team and we will verify compatibility before you order.
Compatibility
This fan grille assembly is compatible with select LG refrigerators, including French door and Door-in-Door smart refrigerator models such as LFXS26973S, LFXS26596S, and LFXS28596S.
Note: Parts that appear similar can have small but important differences in size and shape between LG refrigerator platforms. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine LG OEM part — factory-specified fit and airflow design
Holds and guides air from the evaporator fan for even, consistent cold air distribution
Resolves "uneven cooling," "poor airflow," and "cracked or broken grille" symptoms
Also shields the fan blade from accidental contact
Durable plastic construction
Direct drop-in replacement matching the original mounting
Compatible with select LG French door and Door-in-Door refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
AEB73764520
Part Type
Refrigerator Fan Grille Assembly
Condition
Genuine OEM
Brand
LG
Location
Around the evaporator fan
Function
Guides evaporator fan airflow and shields the fan blade
Material
Plastic
Quantity
1 fan grille assembly
Compatible Brand
LG
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves to protect your hands. Access is typically through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator fan area where the grille is mounted. Photograph the grille's orientation and any mounting clips or screws before removing it. Carefully remove the old grille from around the fan, taking care not to contact the fan blade itself. Install the new AEB73764520 grille in the same position, securing any clips or screws to hold it firmly in place. Reassemble the back panel, restore power, and monitor the refrigerator over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My cooling seems uneven, with some areas colder than others. Could this grille be the cause?
Yes, this is possible if the grille is cracked, warped, or has come loose. This grille's job is to guide the evaporator fan's airflow evenly throughout the compartment, so damage or misalignment can cause cold air to concentrate in some areas while other spots don't get adequate circulation.
Why does this part need to match my model so precisely?
Fan grille assemblies that look very similar at a glance can have small differences in size and shape between different LG refrigerator platforms, since the grille has to fit precisely around the specific fan and duct assembly used in your model. Ordering based on a general resemblance rather than confirming your exact model number risks a poor fit that doesn't seat or seal correctly.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original mounting and airflow design of the fan grille assembly originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM 280187 Washer Drain Pump Assembly
The 280187 is a genuine OEM drain pump assembly from Whirlpool for Whirlpool-built front-load washers sold under the Whirlpool, Kenmore, Kenmore Elite, Maytag, KitchenAid, and Amana names. The drain pump pushes water out of the tub through the drain hose at the end of the wash and rinse stages. When it clogs, wears out, or seizes, the washer can stop with water still in the drum, throw drain errors, stop before the spin cycle, leak, or make loud humming or grinding noises.
This is a complete drain pump assembly, including the pump motor and housing, so it replaces the whole unit rather than just an internal part. As a genuine OEM part, not an aftermarket equivalent, it matches the original factory fit and specification. The pump sits at the base of the washer behind the lower front panel, and the swap typically takes 15–30 minutes with common hand tools.
Quick Answer
The Genuine OEM 280187 Drain Pump Assembly fixes a Whirlpool-built front-load washer that won't drain, leaves water in the drum, stops before spinning, leaks from the pump, or makes loud noise during draining. Complete pump motor and housing, genuine OEM. Classic symptom: the cycle stalls with water still in the tub, or you hear a loud hum or grind while it tries to drain.
Common Problems This Part Fixes
Washer won't drain, or water is left in the drum after the cycle
Drain error codes or the cycle stopping before the spin
Loud humming, grinding, or rattling while the washer drains
Water leaking from the pump or its housing
Pump motor seized or not running
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drain pump assembly replaces the following part numbers:
280187 replaces 1200164, 285998, 8181684, 8182819, 8182821, AH1485610, AP3953640, AWP39453, EA1485610, EAP1485610, PD00002352, PS1485610
These are Whirlpool's current and earlier numbers for this pump. If your old pump or parts diagram shows any of them, this is the matching replacement.
Compatibility
This pump is listed for select front-load washers from:
Whirlpool, including Duet models such as WFW9400VE03, WFW9500TW03, and WFW9600TW02
Kenmore and Kenmore Elite, including 11042822200, 11042926200, 11045962400, and 11045966403
Maytag, including MHWE400WR00 and MHWE400WW0
KitchenAid, including KHWS02RWH0
Amana
Note: The model list above is only a sample, since this pump fits many more models. Confirm fit by matching the number on your old pump or parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order. This pump is for front-load washers and is not intended for top-load machines.
Key Features
Genuine OEM Whirlpool drain pump assembly, not an aftermarket equivalent
Complete unit with pump motor and housing
Restores full draining so cycles finish and the washer can spin
Cross-references to Whirlpool 280187, 285998, 8181684, 8182819, and 8182821
Fits select Whirlpool, Kenmore, Maytag, KitchenAid, and Amana front-load washers
Typical installation 15–30 minutes with common hand tools
Product Specifications
Part Number
280187
OEM Part Number
280187
Part Type
Washer Drain Pump Assembly
Condition
Genuine OEM
Included
Pump Motor and Housing
Application
Select Whirlpool, Kenmore, Kenmore Elite, Maytag, KitchenAid & Amana Front-Load Washers
Installation Notes
⚠️ Unplug Power and Expect Water Unplug the washer and turn off the water supply before starting. Remove the lower front panel to reach the pump at the base of the washer, then drain any residual water into a shallow pan or with a wet/dry vacuum, using the drain hose or the small drain cap if your model has one. Disconnect the wiring harness from the pump, then loosen the clamps holding the hoses and pull the hoses off. Remove the pump's mounting screw and take out the old pump. Fit the new pump in the same position, reattach the hoses with the clamps (replace worn clamps if needed), and reconnect the wiring harness. Check that the pump and hose connections are secure, replace the front panel, restore power and water, and run a drain cycle while checking for leaks. Common tools include a nutdriver or Torx driver, screwdrivers, and pliers.
Frequently Asked Questions
My washer won't drain. Is this the part I need?
A failed or clogged drain pump is one of the most common causes. Before replacing it, check the drain hose and the pump filter for a clog, such as a sock or coin. If the filter is clear but the pump hums, grinds, or doesn't run, replacing the pump should fix it.
Does this include the pump motor?
Yes. This is the complete assembly, with the pump motor and housing.
My old pump is marked 285998, 8181684, 8182819, or 8182821. Will this work?
Yes. All of those are earlier Whirlpool numbers for this pump, and 280187 is the current number.
Will this fit my top-load washer?
It is intended for front-load washers. Contact our support team with your model number if you're unsure, and we'll confirm before you order.
Is this an OEM part?
Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent, so it matches the original factory fit and specification.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
W11396717 Genuine OEM Whirlpool Washer Drain Pump Assembly
The W11396717 is a Genuine OEM Whirlpool replacement drain pump assembly compatible with select Whirlpool, Maytag, and Kenmore high-efficiency top-load washers — including the Whirlpool WTW5100, WTW6120, WTW7120, WTW8120, and WTW8127 series, and the Maytag MVW6200, MVW6230, MVW7230, MVW7232, and MVW8230 series. The drain pump removes water from the washer tub during the drain portion of each wash cycle. When the pump fails, the washer will not drain, will leave standing water in the tub, stop mid-cycle, or make loud humming, grinding, or rattling noises during the drain phase.
Rated 120V, 60Hz, 1.2A (CL.F duty class), this complete pump assembly is mounted to the underside of the outer tub and secured by three mounting screws. It directly replaces the earlier W11263349 as well as 4960510, AP6974116, PS12731177, and EAP12731177. Note: the pump is accessed from the bottom of the washer — the machine must be tilted or laid on its back to reach the mounting screws. Installs in 20–35 minutes with basic hand tools.
Quick Answer
The W11396717 Genuine OEM Whirlpool Washer Drain Pump fixes Whirlpool and Maytag HE top-load washers that won't drain, leave standing water, stop mid-cycle, or make loud noise during the drain cycle. 120V/60Hz/1.2A CL.F. Mounted on the underside of the outer tub — access by tilting the washer. Replaces W11263349, 4960510, AP6974116, PS12731177, EAP12731177. Compatible with Whirlpool WTW5100/6120/7120/8120/8127 and Maytag MVW6200/6230/7230/7232/8230 series top-load washers.
Common Problems This Part Fixes
Washer not draining — standing water remaining in the tub after a cycle
Washer stopping mid-cycle due to a drain fault
Loud humming during the drain phase — motor energized but pump not moving water
Grinding or rattling during drain — damaged impeller or worn bearings
Clothes excessively wet after a full cycle — pump not fully removing water before spin
Water draining very slowly — pump motor weakening below rated performance
Water leaking from the pump area underneath the washer
Replaces Part Numbers
This drain pump directly replaces the following OEM and cross-reference part numbers:
W11396717, W11263349, Hanyu B25-3A04, AP6974116, AWP44690, EAP12731177, PD00065247, PS12731177
W11396717 is the current production part number superseding W11263349. If your parts diagram shows W11263349, the W11396717 is the correct current replacement. Contact our support team if you need confirmation before ordering.
Compatibility
This drain pump is compatible with select HE top-load washers from the following brands and series:
Whirlpool top-load washers — WTW5100HC0, WTW5100HW0, WTW5105HC0, WTW5105HW0, WTW6120HC0, WTW6120HW0, WTW7120HC0, WTW7120HC1, WTW7120HW0, WTW8120HC0, WTW8120HW0, WTW8127LC1, WTW8127LW0, WTW8127LW1 and related models
Maytag top-load washers — MVW6200KW0, MVW6230HC0, MVW6230HW0, MVW6230RHW0, MVW7230HC0, MVW7230HC1, MVW7230HW0, MVW7230HW1, MVW7232HC0, MVW7232HC1, MVW7232HC2, MVW7232HW0, MVW7232HW1, MVW7232HW2, MVW8230HC0, 7MMVW7230LC0, 7MMVW7230LW0 and related models
Kenmore / Sears top-load washers — 11021112021, 11021652020, 11031652020 and related models
Note: This pump is mounted on the underside of the outer tub and requires tilting or laying the washer on its back for access. Always verify your model number before ordering.
Key Features
Removes water from the tub during drain and spin cycles for proper washer operation
Rated 120V, 60Hz, 1.2A (CL.F) — correct electrical specifications for compatible HE top-load washers
Current production part — directly supersedes W11263349
Mounted on the underside of the outer tub and secured by three mounting screws — tilt or lay washer on its back for access
Replaces W11263349, 4960510, AP6974116, PS12731177, EAP12731177, and B25-3A04
Compatible with Whirlpool WTW5100/6120/7120/8120/8127 and Maytag MVW6200/6230/7230/7232/8230 series top-load washers
Genuine OEM part manufactured by Whirlpool to factory specifications — guaranteed fit and performance
DIY repair — installs in 20–35 minutes with basic hand tools
Product Specifications
Part Number
W11396717
Supersedes
W11263349
Part Type
HE Top-Load Washer Drain Pump Assembly
Condition
Genuine OEM
Application
Whirlpool / Maytag / Kenmore HE Top-Load Washers
Voltage
120V AC
Frequency
60 Hz
Amperage
1.2A
Duty Class
CL.F
Mounting
3 screws on underside of outer tub — tilt washer for access
Compatible Brands
Whirlpool, Maytag, Kenmore
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting — Work Gloves Recommended Disconnect power and turn off the water supply before beginning. Wear work gloves throughout. The drain pump is mounted on the underside of the outer tub — to access it, disconnect the water supply hoses, drain hose, and lid switch wiring, then carefully tilt the washer onto its back or side on a padded surface. Locate the pump on the bottom of the tub. Using a 5/16" nut driver, remove the three mounting screws securing the pump assembly to the tub. Release the two spring clamps with channel-lock pliers and disconnect the inlet and outlet hoses from the pump. Disconnect the wiring harness and remove the old pump. Install the new W11396717 pump in the same position, reconnect hoses and clamps, reconnect the wiring harness, and secure with the three mounting screws. Return the washer to upright, reconnect all hoses and wiring, restore power and water, and run a drain/spin cycle to confirm drainage and check for leaks. Tools needed: Phillips screwdriver, 5/16" nut driver, channel-lock pliers, padded surface for tilting, work gloves.
Frequently Asked Questions
What is the difference between W11396717 and W11263349?
These are the same drain pump assembly across two production revisions. W11263349 was the original part number, and W11396717 is the current updated version that supersedes it. Whirlpool issues updated part numbers when minor engineering changes are made during production. Both are the same pump with the same specifications, dimensions, and function. If your washer's parts diagram shows W11263349, the W11396717 is the correct current replacement to order.
Why does accessing this pump require tilting the washer?
On compatible Whirlpool WTW and Maytag MVW HE top-load washers, the drain pump is mounted directly to the underside of the outer tub — not on the cabinet side panel or behind a front access panel as on some other models. The pump's three mounting screws are only reachable from below the machine. The standard repair procedure is to unplug and disconnect the washer, tilt it onto its back or side on a padded surface, access the pump from underneath, and return the washer to upright after installation.
How do I know if it's the drain pump versus a blocked drain hose?
Before replacing the pump, check the drain hose for kinks or blockages — disconnect the hose and blow through it to confirm it is clear. Also check whether the drain hose standpipe height is within the recommended range (typically 39–96 inches from the floor). If the hose is clear and properly positioned but the washer still won't drain, listen during the drain phase: a completely silent drain cycle (motor not running) suggests a failed motor or control board issue, while a humming or grinding noise during drain confirms the pump motor is receiving power but the pump is mechanically failed and needs replacement.
Is this pump the same as the W10876600 used in older Whirlpool Cabrio models?
No — the W11396717 and the W10876600 are different drain pumps for different Whirlpool top-load washer generations. The W10876600 (and its successor WPW10730972) is used in older Whirlpool Cabrio and Maytag Centennial models. The W11396717 is used in newer WTW5100/6120/7120/8120 and MVW6200/6230/7230/7232/8230 series models. They are not interchangeable — verify your model number before ordering.
Is this an OEM or aftermarket part?
This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same drain pump assembly installed in compatible Whirlpool, Maytag, and Kenmore top-load washers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
EXP653 Dryer Idler Pulley and Belt Set Replaces 6602-001655, DC93-00634A
The EXP653 is an aftermarket replacement drum belt and idler pulley set for Samsung electric dryers, and also fits select Kenmore, Amana, and Maytag models built on the Samsung platform. These two components work together: the drum belt wraps around the drum and motor pulley to transmit rotation and keep the drum tumbling, while the idler pulley rides against the belt to maintain proper tension so it doesn't slip or sag during operation.
Over time, the belt wears, cracks, or glazes over, and the idler pulley's bearing wears out, causing it to spin roughly or seize. Because these two parts work together in the same drive path and tend to wear on a similar timeline, they're commonly sold and replaced as a set. Symptoms of failure include the dryer not starting, the drum not tumbling or spinning, and noise issues such as squealing or grinding during operation. It directly replaces 6602-001655, 6602-001314, 5PH2337, EXP645, PD00002012, EAP2407938, AP4373659, PS4133825 (drum belt), and DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, PD00032419, EAP11771601, AP6038887, and PS11771601 (idler pulley).
Quick Answer
The EXP653 Dryer Idler Pulley and Belt Set fixes Samsung, Kenmore, Amana, and Maytag electric dryers that won't start, won't tumble or spin, or make squealing/grinding noise during operation. Includes drum belt and idler pulley. Replaces 6602-001655, 6602-001314, 5PH2337, EXP645, PD00002012, EAP2407938, AP4373659, PS4133825, DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, PD00032419, EAP11771601, AP6038887, PS11771601. These two parts wear together — replacing both at once, rather than just the one that failed, helps avoid reopening the dryer again soon after.
What's In The Set
Component
Replaces
Function
Drum Belt
6602-001655
Wraps around the drum and motor pulley to transmit rotation and keep the drum tumbling.
Idler Pulley
DC93-00634A
Rides against the belt to maintain proper tension so it doesn't slip or sag.
Common Problems This Set Fixes
Dryer won't start
Drum won't tumble or spin
Squealing or grinding noise during operation
Belt slipping or sagging, causing inconsistent tumbling
Vibration or rattling from the belt/pulley area
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer idler pulley and belt set directly replaces the following OEM and cross-reference part numbers:
6602-001655, 6602-001314, 5PH2337, PD00002012, EXP645, EAP2407938, AP4373659, ASM874658, PS4133825, DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, EXP645, 4455850, PD00032419, EAP11771601, AP6038887, ASM34631, PS11771601.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This set is compatible with select Samsung electric dryers, and also fits select Kenmore, Amana, and Maytag dryers built on the Samsung platform, including model numbers such as:
DV42H5000EW/A3, DV42H5000GW/A3, DV42H5200EF/A3, DV42H5200EP/A3, DV42H5200EW/A3, DV42H5200GF/A3, DV42H5200GP/A3, DV42H5200GW/A3
DV42H5400EF/A3, DV42H5400EW/A3, DV42H5400GF/A3, DV42H5400GW/A3, DV42H5600EP/A3, DV42H5600EW/A3, DV42H5600GP/A3, DV42H5600GW/A3
DV45H6300EG/A3, DV45H6300EW/A3, DV45H6300GG/A3, DV45H7000EW/A2, DV48H7400EW/A2, DV48J7700EW
DV45K6200EW/A3, DV45K7600EW/A3, DV40J3000EW/A2, DV48J7770EP, DV50F9A6EVW/A2, DV52J8700EP/A2, DV52J8700EW
DV330AEB/XAA, DV331AER/XAA, DV350AEP/XAA, DV350AER/XAA, DV350AEW/XAA
DV455EVGSGR/AA, DV455EVGSWR/AA, DV455GVGSGR/AA, DV455GVGSWR/AA
DV456ETHDSU/AA, DV456EWHDSU/AA, DV456EWHDWR/AA, DV456GWHDSU/AA, DV456GWHDWR/AA
DV457EVGSGR/AA, DV457EVGSWR/AA, DV457GVGSGR/AA, DV457GVGSWR/AA
Note: Always verify your full model number before ordering, since Samsung uses different belt lengths and pulley designs across its dryer lineup. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement set — drum belt and idler pulley in one purchase
Resolves "won't start," "won't tumble or spin," and "squealing/grinding noise" symptoms
Restores smooth drum rotation with proper belt tracking and tension
Reduces noise and vibration from a worn belt or seized pulley
Direct drop-in replacement matching the original belt length and pulley mounting
Replaces 6602-001655, 6602-001314, 5PH2337, EXP645, PD00002012, EAP2407938, AP4373659, PS4133825, DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, PD00032419, EAP11771601, AP6038887, and PS11771601
Compatible with Samsung, Kenmore, Amana, and Maytag electric dryers
Built to OEM-equivalent quality standards
Product Specifications
Part Number
EXP653
Set Contents
1x Drum Belt (replaces 6602-001655), 1x Idler Pulley (replaces DC93-00634A)
Condition
Aftermarket Replacement
Application
Samsung Electric Dryers
Belt Material
Black rubber
Pulley Material
Metal alloy
Repair Difficulty
Moderate — front/top panel removal required
Compatible Brands
Samsung, Kenmore, Amana, Maytag
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Remove the top and front panels of the dryer to access the drum, belt, and idler pulley. Remove the old drum belt from around the drum and motor pulley. Remove the old idler pulley from its mounting bracket. Install the new EXP653 idler pulley in the same position, making sure it spins freely by hand before continuing. Route and install the new drum belt correctly around the drum and motor pulley, matching the original path exactly, and re-tension it through the idler pulley. Reinstall the drum if it was removed, then reassemble the front and top panels. Restore power and run a test cycle to confirm quiet, smooth operation with the drum tumbling normally and no squealing or grinding noise. Tools needed: 1/4" nut driver, Phillips screwdriver, work gloves.
Frequently Asked Questions
My dryer won't start. Could that really be the belt or pulley?
Yes, on some models a broken belt or seized idler pulley can prevent the dryer from starting a cycle at all, since certain safety switches rely on normal drum movement or belt tension to allow the cycle to proceed. If your dryer hums or clicks but won't fully start, or starts and immediately stops, this set is worth checking alongside more obvious suspects like the door switch.
Do I need to replace both the belt and the pulley, or just the one that failed?
You can replace just the failed component if you've confirmed which one is actually bad, but these two parts share the same drive path and tend to wear out around the same time — a seized pulley can accelerate belt wear, and a worn belt puts extra strain on the pulley. Replacing both together, since you'll already have the dryer open, helps avoid a second teardown soon after.
My dryer squeals during operation. Is that this set?
Yes, squealing or grinding noise is one of the most common symptoms addressed by this belt and pulley set, typically caused by a worn idler pulley bearing or a belt that's slipping due to lost tension.
Is this an OEM or aftermarket part?
This is an aftermarket replacement set built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the belt length, rib pattern, and pulley design of the original 6602-001655 belt and DC93-00634A idler pulley used in compatible Samsung, Kenmore, Amana, and Maytag electric dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPHVC1095 Microwave High Voltage Capacitor, 2100 VAC, 0.95 µF – Universal Microwave Replacement
Product Description
Restore proper microwave heating performance with the HVC1095 Microwave High Voltage Capacitor (2100 VAC, 0.95 µF). This high-quality aftermarket capacitor stores and releases electrical energy required by the high-voltage circuit to power the magnetron. A faulty capacitor may cause the microwave to stop heating, hum loudly, or trip breakers. Replacing it with this reliable XPHVC1095 capacitor helps restore efficient heating and safe microwave operation.
Compatibility
This universal microwave high-voltage capacitor is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 2100 VAC, 0.95 µF capacitor.
Commonly used in countertop, over-the-range, and built-in microwave models.
Always verify voltage and capacitance requirements before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Built to OEM-equivalent electrical specifications
⚡ 2100 VAC, 0.95 µF Rating – Supports proper magnetron operation
🔥 Restores Heating Function – Fixes microwave running but not heating
💪 Heavy-Duty Construction – Designed for high-voltage applications
💰 Cost-Effective Repair – Reliable alternative to OEM microwave capacitors
📐 Product Specification
Part Number: XPHVC1095
Component Type: Microwave High Voltage Capacitor
Voltage Rating: 2100 VAC
Capacitance: 0.95 µF (microfarad)
Application: High-voltage power supply circuit, (4.8 mm) 2 male terminals, Oval Shape
Mounting: Bracket-mounted
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, insulated pliers
⚠️ Safety First:WARNING: This high-voltage capacitor is for microwaves. High-voltage capacitor is an electric device that holds a charge of electricity in the high-voltage circuit of the microwave. Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part.
Basic Steps:
Unplug the microwave.
Remove the outer cabinet.
Safely discharge the existing capacitor.
Disconnect wiring and remove the old capacitor.
Install the new HVC1095 capacitor securely.
Reconnect wiring, reassemble the cabinet, and restore power.
Test microwave heating operation.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore microwave heating safely and efficiently — Add to Cart Now for a dependable, budget-friendly repair!
Genuine OEM Whirlpool Washer Part
WP3951632 Washer Genuine OEM Lower Agitator
The lower agitator base moves back and forth during the wash cycle to help circulate clothing through the water and detergent.
Product Overview
The Whirlpool WP3951632 Washer Lower Agitator is the lower half, or base, of the agitator used in compatible top-load washing machines. During the wash cycle, the agitator moves back and forth to circulate clothing through the wash water and detergent for effective cleaning.
This is a new Genuine OEM Whirlpool replacement part manufactured to the original equipment specifications for proper fit and operation in compatible models.
Quick Answer
WP3951632 is the Genuine OEM Whirlpool lower agitator base for select top-load washers. It replaces part number 3951632. This listing is for the lower agitator only; the upper agitator, agitator dogs, cam, cap, bolt, dispenser, and other hardware are not included unless specifically shown in the product photographs.
Common Problems This Part May Fix
Washer fills and runs but clothing is not agitated properly
Lower agitator does not move during the wash cycle
Cracked, broken, or damaged agitator fins
Worn or stripped center connection on the agitator base
Agitator slips on the transmission shaft
Poor washing or uneven clothing movement
Replaces and Cross-References
WP3951632, 3951632, 547649, AP6008904, AWP47252, EAP11742045, PD00004360, PS11742045.
WP3951632 is the current manufacturer part number. Other numbers shown are previous manufacturer or retailer cross-reference numbers used to identify the same lower agitator.
Compatibility
Designed for select Whirlpool-built top-load washers, including certain models sold under the Whirlpool, Amana, Crosley, Estate, Inglis, and Kenmore brand names. Confirmed model examples include:
WTW4800BQ1
WTW4816FW1
WTW4816FW3
WTW4850XQ3
LSQ9010PW3
7MWTW1701DQ1
3RGSC9455JQ1
110.20232711
VAW3584GW0
Important: This is only a partial compatibility list. Agitators can look similar but use different shaft connections, heights, fins, and internal components. Verify the complete washer model number before ordering.
Key Features
Genuine OEM Whirlpool replacement part
Lower agitator base for compatible top-load washers
Moves clothing through wash water and detergent
Durable molded construction
Designed for original fit and operation
Direct replacement when WP3951632 is specified
Replaces original part number 3951632
Product Specifications
Manufacturer Part Number
WP3951632
Brand
Whirlpool
Part Type
Washer Lower Agitator / Agitator Base
Condition
New
Quality
Genuine OEM
Application
Top-Load Washing Machine
Primary Function
Moves clothing through wash water during agitation
Included
One Lower Agitator Base
Installation Notes
Unplug the washer before beginning the repair.
Remove the fabric-softener dispenser or agitator cap, if installed.
Remove the inner cap or seal to access the agitator retaining bolt.
Use the correct socket and extension to remove the center retaining bolt.
Lift the agitator assembly from the washer and separate the upper agitator from the lower base as required.
Inspect the agitator bolt, thrust washer, cam, agitator dogs, upper agitator, and transmission shaft for additional wear.
Install the new lower agitator in the same position, tighten the retaining bolt securely, and reinstall all caps or dispenser components.
Installation tip: A washer that does not agitate can also have worn agitator dogs, a damaged cam, a loose bolt, a failed drive component, or a transmission problem. Diagnose the appliance before ordering when the cause is uncertain.
Frequently Asked Questions
Is WP3951632 a genuine Whirlpool part?
Yes. WP3951632 is a Genuine OEM Whirlpool replacement lower agitator.
Does this listing include the complete agitator assembly?
No. This part is the lower agitator base only. The upper agitator, cam, agitator dogs, cap, dispenser, bolt, and related hardware are separate unless specifically shown or stated.
What part number does WP3951632 replace?
WP3951632 replaces the previous manufacturer part number 3951632.
Will this fit every Whirlpool washer?
No. It fits only select top-load washer models. Verify your complete model number and required manufacturer part number before purchasing.
Should I replace the agitator dogs at the same time?
Inspect the agitator dogs and cam while the agitator is disassembled. Replace them separately if they are worn, rounded, cracked, or slipping.
Shop With Confidence
Purchase the correct Genuine OEM replacement part for dependable fit and performance. Verify your washer model number before ordering, and contact our parts team when compatibility assistance is needed.
Genuine OEM WhirlpoolFast U.S. ShippingCompatibility SupportSecure Checkout
WPW10226427 Refrigerator Genuine OEM Power Supply Board
Replaces Part Numbers: WPW10226427, W10226427, 1551792, OEM18052172, AP6017389, PS11750687.
Description: This is a Genuine OEM refrigerator power supply board. It's an internal component that is made to control the refrigerator functions. This part is made with small precision parts to help with timing defrost and cooling cycles. This part can be damaged or malfunction and stop operating correctly. This may prevent the refrigerator from running, cause strange sounds, or cause the refrigerator to run at the wrong temperature.If this part is damaged, it will need to be replaced. Before replacing the power supply board, make sure the refrigerator is unplugged from the wall. The process will require a flathead screwdriver and a nut driver. Use the tools to unthread the screws on the access cover. Depress the retaining tab to remove the inner cover and disconnect the wires. Press the tab to release the power supply board and snap in the new component. Make sure the wires are properly connected and reassemble.This genuine OEM replacement part is sold on an individual basis. It is directly acquired from the manufacturer and is designed to be compatible with specific refrigerator models made by Kenmore, Whirlpool, Maytag, and KitchenAid.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
2304099 Refrigerator Defrost Control Board
Replaces Part Numbers: WP2304099, 2304099, 1174817, 2213100, 2213473, 2302564, 2303826, OEM24028522, AP6007130, PS11740238.
Description: This is a refrigerator control board that can be used to replace a damaged or faulty board in select refrigerators. The control board is used to manage various functions that occur in the refrigerator, including cooling and defrosting. If there is a problem with the board, the refrigerator might not be able to defrost correctly, or it might not stay cool. This control board for the refrigerator tends to last a long time. However, it could eventually wear out and stop working. It could be damaged due to a voltage surge, or it might be a faulty board. Remove and store all food in the refrigerator and unplug it before beginning repairs. This refrigerator control board works with certain models from Kenmore, Whirlpool, KitchenAid, Roper, Estate, Inglis, Crosley, Gladiator, Kirkland, and Maytag.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
