Genuine GE OEM Refrigerator Part
GE WR14X29372 Refrigerator Genuine Fresh Food Door Gasket - White
Genuine OEM fresh-food compartment door gasket for select GE and Hotpoint top-mount refrigerators.
Product Overview
The GE WR14X29372 Refrigerator Fresh Food Door Gasket is a Genuine GE OEM replacement seal for compatible refrigerator fresh-food doors. The gasket creates an airtight seal around the door perimeter to help keep warm room air out and cooled air inside.
This gasket is white and is designed for select GE and Hotpoint top-mount refrigerators.
Quick Answer
WR14X29372 is a Genuine GE OEM white fresh-food refrigerator door gasket. Replace it when the original gasket is torn, cracked, deformed, or no longer sealing properly. Always verify the complete appliance model number before ordering.
Common Problems This Part May Fix
Warm air entering the fresh-food compartment
Condensation or moisture around the refrigerator door
Excess frost or temperature instability
Door gasket is torn, split, cracked, or hardened
Door gasket has pulled away from the liner
Refrigerator runs longer because of air leakage
Replaces and Cross-References
WR14X29372, 4589966, AP6328755, EAP12298193, AGE28136, OEM18986274, PD00056633, PS12298193
Cross-reference numbers are provided for identification. Confirm fit using the complete refrigerator model number.
Compatibility
Fits select GE and Hotpoint top-mount refrigerators. Compatible model examples include:
GTE15CTHLRWW
GTE15CTHLLWW
GTE15CTHMRWW
GTE15NTHMRWW
GTS15CTHLRWW
GTS15CTHMRWW
FBS15RCKLRWW
HPS15BTHMRWW
HPE15BTHLRWW
Important: This is only a partial model list. Verify the complete refrigerator model number before purchase. Similar GE refrigerators may use a different fresh-food or freezer gasket.
Key Features
Genuine GE OEM replacement part
Fresh-food compartment door gasket
White color
Helps maintain an airtight door seal
Helps reduce warm-air infiltration and moisture
Designed for select GE and Hotpoint refrigerators
Product Specifications
Manufacturer Part Number
WR14X29372
Brand
GE Appliances
Part Type
Fresh Food Door Gasket
Color
White
Condition
New
Part Quality
Genuine OEM
Application
Refrigerator Fresh-Food Door
Approx. Shipping Weight
3.28 lb
Package Quantity
1 Door Gasket
Installation Notes
Safely store temperature-sensitive food before leaving the refrigerator door open for service.
Compare the new gasket with the original before removing the old seal.
If the replacement gasket arrives folded or creased, allow it to relax at room temperature or gently warm it according to manufacturer guidance before installation.
Remove the old gasket carefully and clean the mounting surface.
Install the new gasket evenly around the door perimeter without stretching it.
Close the door and inspect the entire seal for gaps, twists, or rolled edges.
Fit tip: GE service guidance notes that shipping folds/creases can be smoothed by warming the gasket gently. Do not overheat or deform the gasket.
Frequently Asked Questions
Is WR14X29372 a Genuine GE OEM gasket?
Yes. WR14X29372 is a Genuine GE Appliances refrigerator door gasket.
Is this the fresh-food or freezer gasket?
This part is for the fresh-food refrigerator door. The freezer door on many compatible models uses a different gasket.
What color is this gasket?
White.
Why does the new gasket look folded when it arrives?
Door gaskets are often folded for shipping. Gentle warming and allowing the gasket to relax can help remove temporary creases before installation.
Will this fit every GE refrigerator?
No. Verify the complete model number because GE uses different gaskets across refrigerator platforms.
Shop With Confidence
Verify the complete refrigerator model number before ordering. This is a Genuine GE OEM part made for compatible GE and Hotpoint refrigerators.
Genuine GE OEMFresh Food Door GasketWhiteCompatibility Support
WR30X39470 Refrigerator Genuine Ice Maker
Fits specific GE refrigerator models.
Replaces Part Numbers: WR30X39470, AP7192967, OEM28771870, PS16729732.
Description: This Refrigerator Ice Maker Assembly is essential for restoring your refrigerator's ice production capabilities. This Genuine OEM part ensures seamless compatibility with a wide range of GE refrigerator models, providing reliable and consistent ice making. Crafted with high-quality materials, the Ice Maker Assembly delivers efficient performance, helping you maintain a steady supply of ice for your daily needs. Its sturdy design ensures long-lasting durability, reducing the need for frequent replacements. Installing this part is straightforward, allowing you to quickly get your refrigerator back to full functionality without hassle. Whether your original ice maker is malfunctioning, leaking, or has worn out over time, the Refrigerator Ice Maker Assembly offers a perfect replacement solution.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO W10316760 Refrigerator Thermistor Sensor
The XPARTCO W10316760 is an aftermarket replacement temperature thermistor compatible with a wide range of Whirlpool-built refrigerators sold under the Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef brands. The thermistor sits inside the fresh food or freezer compartment and continuously reports internal temperature back to the electronic control board, which uses that reading to cycle the compressor, evaporator fan, and damper to keep the compartment in range. When the thermistor drifts out of calibration or fails outright, the control board loses an accurate temperature signal and the refrigerator commonly responds with erratic cooling, a warmer-than-normal compartment, food freezing when it shouldn't, or a flashing/blank temperature display.
This XPARTCO version is built with a quick-connect mounting clip, so it plugs in without cutting or splicing wires — unlike the genuine Whirlpool OEM part, which ships as a splice-in kit requiring you to cut the old thermistor's leads and join the new ones with included wire connectors. It directly replaces W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944, and additional cross-reference numbers listed below. Installs in 15–30 minutes with basic hand tools.
Quick Answer
The XPARTCO W10316760 Refrigerator Thermistor Sensor fixes Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef refrigerators that are running warm, running constantly, freezing food unexpectedly, or showing a flashing/blank temperature display. This version uses a quick-connect clip — no wire cutting or splicing like the genuine Whirlpool splice-kit version requires. Replaces W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944. Classic symptom: fridge or freezer running warmer than the setting, or running nonstop.
Common Problems This Part Fixes
Refrigerator or freezer running noticeably warmer than the temperature setting
Fridge running constantly and never cycling off
Temperature display flashing, showing dashes, or displaying an error code
Food freezing in the fresh food compartment when it shouldn't be
Compressor and fans not cycling normally, or running nonstop
Inconsistent or swinging temperature readings on the display
One compartment (fridge or freezer) running warm while the other stays normal
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator thermistor directly replaces the following OEM and cross-reference part numbers:
W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermistor is used across a wide range of Whirlpool-built refrigerators from the following brands:
Whirlpool refrigerators (including WRF535SMBM00, WRX735SDBM00, and related French door / side-by-side models)
KitchenAid refrigerators (including KBFS22EWBL1, KBFS22EWMS1, KBFS22EWMS3, KBFS22EWMS5, KBFS22EWMS7, KBFS22EWWH1)
Maytag refrigerators (select Whirlpool-built models, including KRFF302ESS)
Jenn-Air refrigerators (select Whirlpool-built models, including MFI2269VEM)
Amana refrigerators (select models)
Inglis refrigerators (select models)
Magic Chef refrigerators (select models)
Note: Many of these refrigerators use separate thermistors for the fresh food and freezer compartments, so confirm which sensor location your model uses before ordering — appearance can be similar across positions. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Direct-fit replacement refrigerator temperature thermistor — reports compartment temperature to the electronic control board
Resolves "running warm," "running constantly," "freezing food," and "flashing display" symptoms caused by thermistor failure
Quick-connect mounting clip — no wire cutting or splicing required
Matches OEM electrical resistance curve for accurate temperature sensing
Approximate lead length ~5 inches
Replaces W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944, and additional cross-reference numbers
Compatible with Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–30 minutes with basic hand tools
Product Specifications
Part Number
XPW10316760
OEM Part Number
W10316760
Part Type
Refrigerator Temperature Thermistor / Sensor
Condition
Aftermarket Replacement
Application
Whirlpool-Built Refrigerators (Fresh Food / Freezer Compartment)
Mounting
Quick-connect clip (no splicing)
Approx. Lead Length
~5 inches (may vary by model)
Compatible Brands
Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, Magic Chef
Installation Notes
⚠️ Disconnect Power Before Starting Unplug the refrigerator or shut off power at the breaker before accessing internal panels. Locate the thermistor at its mounting position inside the fresh food or freezer compartment (location varies by model — consult your model's parts diagram if unsure). Photograph the wire routing before disconnecting. On this XPARTCO version, simply unplug the old thermistor's connector from the wiring harness — no cutting or splicing needed. Release the old thermistor from its mounting clip or bracket and remove it. Install the new thermistor in the same position, securing it in its mounting clip. Plug the new thermistor's connector into the wiring harness, matching your photos. Reassemble any panels removed for access. Restore power and allow the refrigerator several hours to stabilize before checking temperatures. Tools needed: nut driver or screwdriver (for panel access), needle-nose pliers (for mounting clip).
Frequently Asked Questions
Is this the same as the genuine Whirlpool W10316760 thermistor?
It's a direct-fit aftermarket equivalent, not the genuine Whirlpool part. The key functional difference is installation: the genuine OEM version ships as a splice-in kit requiring you to cut the old wires and use included splice connectors, while this XPARTCO version has a quick-connect clip that simply plugs in — no splicing tools needed.
Will this fit my refrigerator?
W10316760 and its cross-reference numbers span a wide range of Whirlpool-built models across several brands. Confirm fit using your refrigerator's exact model number before ordering, since visually similar thermistors are used across different platforms and compartment locations. Contact our support team with your model number if you're unsure.
My fridge is warm but the freezer is fine (or vice versa) — could this part be the cause?
Yes. Most of these refrigerators use separate thermistors for the fresh food and freezer compartments, so a single failed sensor can cause one section to run warm while the other stays normal. Confirm which sensor location your model uses before ordering.
Do I need any tools to install this?
Basic hand tools to access the interior panel (typically a nut driver or screwdriver) plus needle-nose pliers to release the old mounting clip. Because this version uses a plug-style connector, no wire strippers, cutters, or splice connectors are needed — unlike the genuine OEM splice-kit version.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the electrical resistance curve, mounting position, and temperature-sensing function of the original W10316760 thermistor used in compatible Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DA32-00024W Refrigerator Temperature Sensor
The XPARTCO DA32-00024W is an aftermarket replacement temperature sensor for Samsung refrigerators. This sensor senses the temperature inside the refrigerator and sends that information to the electronic control board, which uses it to regulate cooling and, on many models, manage the defrost cycle. The manufacturer designation for this sensor is "SENSOR TEMP;NW2,5V,R-DEF," indicating its role in the defrost-related temperature monitoring circuit.
Over time, the sensor's electronics can drift out of calibration or fail outright from age or moisture exposure. A failing sensor typically shows up as inconsistent cooling, temperatures that run warmer or colder than the set point, or increased energy consumption as the refrigerator's control struggles to compensate for inaccurate temperature readings. It directly replaces AP5579174, 3955001, and PS4138632.
Quick Answer
The XPARTCO DA32-00024W Refrigerator Temperature Sensor fixes Samsung refrigerators with inconsistent cooling, temperatures running warmer or colder than expected, or increased energy consumption. Replaces AP5579174, 3955001, PS4138632. This sensor is tied to defrost-related temperature monitoring on many models — if you're also seeing frost buildup or defrost cycle issues, this sensor is worth checking alongside the defrost thermostat or heater.
Common Problems This Part Fixes
Inconsistent cooling in the refrigerator or freezer compartment
Temperature running warmer or colder than the set point
Increased energy consumption from the refrigerator overcompensating
Temperature fluctuations affecting food freshness
Defrost cycle irregularities on models where this sensor is part of that circuit
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator temperature sensor directly replaces the following OEM and cross-reference part numbers:
DA32-00024W, 3955001, AP5579174, ASM30135, EAP4138632, PD00030760, PS4138632.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This temperature sensor is compatible with select Samsung refrigerators, including model numbers RS25H5111SR and RF4287HARS.
Note: Samsung uses several different temperature sensors across its refrigerator lineup, including sensors for different compartments and functions. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which sensor your refrigerator needs.
Key Features
Aftermarket replacement temperature sensor — monitors internal refrigerator temperature
Resolves "inconsistent cooling," "temperature off target," and "high energy use" symptoms caused by sensor failure
Reports temperature data to the electronic control board for cooling and defrost regulation
Direct drop-in replacement — no modification required
Replaces AP5579174, 3955001, and PS4138632
Compatible with Samsung refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Straightforward installation
Product Specifications
Part Number
XPDA32-00024W
OEM Part Number
DA32-00024W
Part Type
Refrigerator Temperature Sensor
Condition
Aftermarket Replacement
Brand
XPARTCO
Manufacturer Designation
SENSOR TEMP;NW2,5V,R-DEF
Function
Senses internal temperature and reports to the electronic control
Repair Difficulty
Easy
Quantity
1 temperature sensor
Compatible Brand
Samsung
Installation Notes
⚠️ Unplug Refrigerator Before Starting Unplug the refrigerator and safely store any food that could spoil while the power is off before installing this part. Wear work gloves to protect your hands. Locate the old temperature sensor per your model's service diagram, since its position varies by refrigerator model. Photograph the wiring connection before disconnecting anything. Disconnect the wiring harness from the old sensor, remove any mounting clips or fasteners holding it in place, and pull it free. Install the new DA32-00024W in the same position, reconnect the wiring harness fully, and secure any mounting hardware. Restore power and monitor the refrigerator's temperature over the next 24 hours to confirm consistent, accurate cooling has returned. Tools needed: Phillips screwdriver (model-dependent), work gloves.
Frequently Asked Questions
My refrigerator's temperature seems inconsistent. Is this the part I need?
Yes, this is a common symptom of a failing temperature sensor. Since this sensor is what reports internal temperature to the control board, a drifting or failed sensor can cause the refrigerator to run warmer or colder than intended, or to cycle inconsistently as the control tries to work from inaccurate data.
What does the "R-DEF" in this sensor's designation mean?
This suggests the sensor plays a role in the refrigerator's defrost-related temperature monitoring on applicable models. If you're seeing frost buildup or defrost cycle problems in addition to general cooling inconsistency, this sensor is worth checking alongside other defrost system components, such as the defrost thermostat or heater.
Is this a difficult repair?
No, replacing this sensor is generally a straightforward repair once you've located its mounting position, which can vary by model. It typically involves disconnecting a wiring harness and removing a small mounting clip or fastener.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the sensing function, voltage reference, and mounting configuration of the original DA32-00024W sensor used in compatible Samsung refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DA31-00146E Genuine OEM Refrigerator Evaporator Fan Motor - Compatible with Samsung, Maytag
Product Description
Maintain optimal cooling with the DA31-00146E Genuine OEM Refrigerator Evaporator Fan Motor. This Samsung-manufactured motor is designed as a replacement for select Samsung and Maytag refrigerators. It powers the fan to circulate air through the freezer and refrigerator compartments, ensuring even temperature distribution and efficient cooling. This part addresses issues like fridge/freezer too warm, frost buildup, unusual noises, or the appliance not shutting off, often caused by a faulty or seized motor.
Note: Includes (1) evaporator fan motor (fan blade not included). Disconnect power before installation. Verify compatibility with your refrigerator model.
Replaces part numbers: DA31-00146E, 1486536, DA31-00146G, DREP3020LA/HAL, PD00002015, AP4136569, PS4138376.
Compatibility:
Compatible with select refrigerator models, including but not limited to:
Samsung: RFG238AABPXAA0000, RS25H5111BC/AA, RS265TDBP/XAA, RS267TDBP/XAA, RH25H5611BC/AA, RH25H5611WW/AA, DFSF9VKBABB, DFSS9VKBASS
Maytag: Various models (verify with model number)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung and Maytag refrigerators.
🔧 Specifications: Genuine OEM Samsung BLDC fan motor, 3.21W, 12VDC, 2520RPM, 1-1/2" shaft.
💪 Reliable Performance: Circulates air to maintain consistent temperatures and cool evaporator coils.
🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 30–60 minutes.
🛡️ Effective Fixes: Resolves warm fridge/freezer, frost buildup, noisy operation, or failure to shut off.
Product Specification
Part Number: DA31-00146E
Component Type: Refrigerator evaporator fan motor
Material: Metal and plastic
Electrical Specs: 3.21W, 12VDC, 2520RPM, 1-1/2" shaft
Compliance: UL-listed, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator cooling efficiently today!
Add to cart now for a reliable fix!
XPARTCO 5221ER1003S Washer Water Valve
The XPARTCO 5221ER1003S is an aftermarket replacement cold water inlet valve for LG and select Kenmore front-load washers. This valve sits underneath the top panel, at the point where the cold water supply hose connects, and it's the gatekeeper for cold water entering the tub. When the control calls for a cold fill, it energizes the valve's solenoid to open, admitting water; once the correct level is reached, it closes again. This part controls the cold water side specifically — hot fills on these washers are governed by a separate valve.
Rated 12V and terminated with small male spade connectors, this valve measures approximately 4.75"H x 3.25"W x 2.25"L, with a gray plastic and metal housing. Over time, rust and mineral buildup inside the valve body — a documented failure point on this platform — can prevent it from sealing fully, which lets water continue flowing even after the valve is told to close. A washer that keeps filling even while draining, or that leaks steadily at the cold connection, is a strong sign of exactly this kind of stuck-open valve failure. Other failure modes include a burned-out solenoid coil and general wear from age. It directly replaces 4869496, AP6798394, PS12587936, and EAP12587936, and is also cross-referenced to the related 5221ER1003A part number.
Quick Answer
The XPARTCO 5221ER1003S Washer Water Valve fixes LG and select Kenmore front-load washers where cold water won't fill, fills slowly, keeps filling continuously (even while draining), or leaks at the water connection. 12V cold water inlet valve, small male spade terminals, 4.75"H x 3.25"W x 2.25"L. Replaces 4869496, AP6798394, PS12587936, EAP12587936. Rust and mineral buildup inside the valve body is a documented cause of it sticking open — check for rust at the connection before you order.
Common Problems This Part Fixes
Washer won't fill with cold water at the start of the cycle
Cold water fills much more slowly than it used to
Washer keeps filling continuously, even while water is simultaneously draining out
Water leaking steadily at the cold water connection point
Visible rust or mineral buildup around the valve body or connection
Cycle stalling at the fill step and never advancing to wash
Water pooling underneath or behind the washer near the cold supply line
Cold wash or cold rinse cycles specifically affected while other cycles run fine
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer cold water inlet valve directly replaces the following OEM and cross-reference part numbers:
5221ER1003S, 5221ER1003A, 4869496, AP6798394, PS12587936, ALG51905, PD00057211, EAP12587936
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This cold water inlet valve is compatible with select LG front-load washers, and also fits select Kenmore front-load washers built on the LG platform, including model numbers such as:
LG WM4000HBA, WM4000HWA, WM3400CW, WM3470CW
LG W3600HVA
Kenmore WKE100HVA (select LG-built models)
Note — cold side only: This is the cold water valve. Some LG front-load washers use a separate hot water valve for the hot supply connection — if hot water fills normally but cold does not, this valve is the correct part; if the issue affects both hot and cold fills, the problem may lie elsewhere in the fill circuit. This valve is specific to LG's front-load platform and is not intended for top-load washers. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement cold water inlet valve for LG and select Kenmore front-load washers
Resolves "won't fill with cold water," "fills slowly," "keeps filling continuously," and "leaking at the connection" symptoms caused by valve failure
Rated 12V with small male spade terminal connections for a secure electrical fit
Gray plastic and metal housing, approximately 4.75"H x 3.25"W x 2.25"L
Direct drop-in replacement — mounts underneath the top panel at the original connection point
Replaces 4869496, AP6798394, PS12587936, and EAP12587936
Compatible with LG and select Kenmore front-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Straightforward DIY repair using basic hand tools
Product Specifications
Part Number
5221ER1003S
OEM Part Number
5221ER1003S (also 5221ER1003A)
Part Type
Washer Water Inlet Valve — Cold
Condition
Aftermarket Replacement
Brand
LG
Application
Front-Load Washers
Voltage
12V
Electrical Connection
Small male spade terminals
Color
Gray
Material
Plastic and metal
Height
4.75 in.
Width
3.25 in.
Length
2.25 in.
Location
Underneath the top panel, dispenser and control panel assembly
Quantity
1 valve
Compatible Brands
LG, select Kenmore
Installation Notes
⚠️ Shut Off Water Supply And Unplug Washer Before Starting — Have A Towel Ready Unplug the washer and shut off the cold water supply valve before beginning. Wear work gloves. Pull the washer away from the wall for access. Unthread the cold water supply line from the back of the valve first — have a towel ready, since residual water will spill out. Unthread the two screws securing the top panel, then slide the panel back and lift it off to access the valve assembly underneath. Photograph the wiring connections before disconnecting anything. Disconnect the spade terminal wire connectors from the old valve, remove its mounting screw or bracket, and pull the valve free. While it's out, inspect the area for rust or mineral scale, and clean the connection point if needed before installing the new valve. Install the new 5221ER1003S in the same position, reconnect the spade terminals, and secure the mounting hardware. Rethread the cold water supply line onto the new valve, tightening securely. Reinstall the top panel and its two screws. Restore the water supply and power, then run a short cycle and confirm the tub fills at the normal rate with no leaking underneath or behind the washer. Tools needed: channellock pliers, flathead screwdriver, pliers, drill/driver with a Phillips bit, towel, work gloves.
Frequently Asked Questions
My washer keeps filling even while it's draining. Is that this valve?
Yes, this is a well-documented failure mode on this platform. Rust and mineral buildup inside the valve body can prevent it from sealing fully closed, so water keeps trickling or flowing into the tub even after the fill portion of the cycle has ended — sometimes enough to keep pace with draining, making it look like the washer is filling and draining simultaneously. If you open up the top panel and see rust around the valve, that strongly confirms this diagnosis.
Cold water won't fill but hot water works fine. Is this the right part?
Yes — this valve controls cold water specifically, and some LG front-load washers use a separate valve for the hot supply. If cold-specific cycles are failing while hot water fills normally, this cold valve is the correct part to replace.
I see rust on my old valve but it isn't leaking yet. Should I still replace it?
It's worth strongly considering. Rust and mineral buildup on this valve is a known precursor to it sticking partially open, which can lead to continuous filling, water waste, and potential water damage if it isn't caught. If you're already inspecting the area and see corrosion forming, replacing the valve proactively is often cheaper and easier than dealing with an active leak later.
What's the difference between 5221ER1003S and 5221ER1003A?
These are cross-referenced as the same valve — 5221ER1003A appears on some parts diagrams and listings as an alternate or prior designation for the identical part. If your washer's diagram shows either number, this listing is the correct replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured to match the 12V solenoid design, spade terminal connections, and dimensions of the original 5221ER1003S cold water valve used in compatible LG and Kenmore front-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10613606 Refrigerator Compressor Start Relay and Capacitor
The XPARTCO W10613606 is an aftermarket replacement compressor start relay and capacitor assembly compatible with a wide range of Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Jenn-Air, Admiral, Crosley, Dacor, Hardwick, Inglis, Litton, and Magic Chef refrigerators. The start relay is a small but critical electrical component that plugs directly onto the compressor terminals and provides the initial power surge needed to start the compressor motor. Once the compressor reaches operating speed, the relay drops out — leaving the compressor to run on its own. The capacitor (rated 15µF ±5%, 250VAC) works alongside the relay to store and release the burst of electrical energy needed on startup.
When the start relay fails, the compressor cannot start — causing the refrigerator to stop cooling entirely. A failed relay typically produces a clicking sound every few minutes as the compressor tries and fails to start, followed by a short rest, then another attempt. This kit includes both the start relay and the CBB61 capacitor. It directly replaces W10416065, 8208290, 8208368, C8931605, 67003186, 67005560, 67005561, 67005562, 67003764, 8171210, and several additional cross-reference numbers. Installs in under 15 minutes — no tools required in most cases.
Quick Answer
The XPARTCO W10613606 Refrigerator Compressor Start Relay and Capacitor fixes refrigerators that are not cooling, are too warm, or are making a repeated clicking sound every few minutes as the compressor tries to start. Plugs directly onto the compressor terminals. Kit includes start relay and 15µF 250VAC CBB61 capacitor. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and more. Replaces W10416065, 8208290, C8931605, 67005560, and more. No tools required — installs in under 15 minutes.
Common Problems This Part Fixes
Refrigerator not cooling — compressor not running
Freezer section too warm or not freezing
Both refrigerator and freezer compartments gradually warming up
Repeated clicking sound every 2–5 minutes from behind or underneath the refrigerator
Compressor hums briefly then shuts off without reaching operating temperature
Refrigerator runs but cannot maintain set temperature
Shaking the start relay reveals a rattling sound inside — confirms internal failure
Replaces Part Numbers
This start relay and capacitor kit directly replaces the following OEM and cross-reference part numbers:
W10613606, 67005560, 3023300, 67003186, 67003764, 67005561, 67005562, W10416065, 8171210, 8208290, 8208368, W10244032, 302TFBYY, SSP14R302TFR, AWP41206, C8931605, PD00004905, EAP8746522, AP5787784, PS8746522.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This start relay and capacitor is compatible with select refrigerators from the following brands:
Whirlpool refrigerators (side-by-side, French door, bottom-freezer)
Kenmore / Sears refrigerators (select Whirlpool-built models)
Maytag refrigerators
KitchenAid refrigerators
Amana refrigerators
Jenn-Air refrigerators
Admiral refrigerators
Crosley refrigerators
Dacor refrigerators
Hardwick refrigerators
Inglis refrigerators
Litton refrigerators
Magic Chef refrigerators
Important: Always verify your refrigerator's model number and compare the old relay's shape and terminal configuration to the new part before installing. Some models may require trimming the wire connector tabs for a proper fit. Contact our support team with your model number if you need confirmation before ordering.
Key Features
Provides the initial electrical surge needed to start the compressor motor — without it, the compressor cannot run and the refrigerator cannot cool
Kit includes both the start relay and the CBB61 run capacitor (15µF ±5%, 250VAC) — everything needed in one package
Plugs directly onto the compressor terminals — no wiring or soldering required in most cases
Quick rattle test — shake the old relay; if it rattles, the internal contacts have failed and it needs replacement
Replaces W10416065, 8208290, C8931605, and over a dozen additional cross-reference part numbers
Compatible with 13 major appliance brands on the Whirlpool platform
Aftermarket replacement built to OEM-equivalent quality standards
Fast DIY repair — installs in under 15 minutes, no tools required in most cases
Product Specifications
Part Number
W10613606
Part Type
Refrigerator Compressor Start Relay and Capacitor Kit
Condition
Aftermarket Replacement
Application
Refrigerator Compressor (side-by-side, French door, bottom-freezer)
Capacitor Type
CBB61 Run Capacitor
Capacitor Rating
15µF ±5%, 250VAC
Kit Includes
1x Start relay, 1x CBB61 capacitor
Installation
Plug-in — no tools required in most cases
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Jenn-Air, Admiral, Crosley, Dacor, Hardwick, Inglis, Litton, Magic Chef
Installation Notes
⚠️ Unplug Refrigerator Before Starting Unplug the refrigerator from the power outlet before beginning. Move the refrigerator away from the wall to access the rear or lower back panel. Remove the rear access panel by unscrewing the retaining screws to expose the compressor. The compressor is a large black dome-shaped component — the start relay and capacitor assembly plugs onto the side terminals. Grip the old relay firmly and pull it straight off the compressor pins. Shake it — if it rattles, the internal contacts have failed and replacement is confirmed. Compare the old relay to the new W10613606 to confirm the terminal layout matches. Align the new relay with the compressor pins and press it firmly on. Reinstall the access panel, restore power, and listen for the compressor to start and run normally within a few minutes. Note: Some models may require trimming the wire connector tabs or reversing the connector orientation for a proper fit — do not force the connection. Tools needed: Phillips screwdriver (for panel access only).
Frequently Asked Questions
What does the compressor start relay do?
The start relay plugs onto the compressor terminals and provides the brief but powerful surge of electrical current needed to start the compressor motor from a standstill. Once the compressor reaches operating speed — usually within a second or two — the relay drops out and the compressor runs on its own. Without a working start relay, the compressor cannot start at all, and the refrigerator stops cooling. The capacitor works alongside the relay to store and deliver the extra energy needed on startup.
How do I know if my start relay has failed?
The most reliable quick test is the rattle test: unplug the refrigerator, pull the start relay off the compressor, and shake it near your ear. A working relay is silent. A failed relay will rattle — the internal contacts have broken free and are loose inside the casing. Another sign is a repeated clicking sound every 2–5 minutes from the back of the refrigerator, where the compressor attempts to start, fails, trips the overload protector, rests, and tries again. If the fridge is warm and you hear clicking, check the relay first.
What is the difference between the start relay and the capacitor?
The start relay is the switching device that connects and disconnects the start winding of the compressor motor during startup. The capacitor stores a charge and releases it during startup to give the motor the additional torque it needs to get moving under load. Together they work as a startup system for the compressor. This kit includes both — replacing both at the same time ensures the complete startup circuit is fresh and reliable.
My fridge is still not cooling after replacing the start relay — what else could it be?
If replacing the start relay does not restore cooling, other possible causes include a failed compressor (the compressor runs but no longer builds pressure), a refrigerant leak in the sealed system, a failed start capacitor (if not replaced along with the relay), a bad overload protector, or a faulty main control board. Listen carefully after installing the new relay — if the compressor now starts and runs but the fridge still doesn't cool after several hours, a sealed system issue or refrigerant problem is likely and will require a certified technician.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the electrical specifications and terminal configuration of the original W10613606 start relay and capacitor assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 2315539 Refrigerator Evaporator Fan Motor Replaces WP2315539
The XPARTCO 2315539 is an aftermarket replacement refrigerator/freezer evaporator fan motor compatible with a wide range of Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Admiral, Estate, Inglis, Ikea, and Gladiator refrigerators. The evaporator fan motor is located in the freezer section and circulates air across the evaporator coils — the cold air generated at the coils is then pushed throughout the freezer and the fresh food compartment. When this motor fails, the most common symptom is excessive noise from the freezer area, and often the refrigerator section won't cool properly even though the freezer remains cold.
This motor includes the incorporated wire harness and plug. Rated 115V, 60Hz, with clockwise rotation. It directly replaces WP2315539, WP2315539VP, 2219689, 2225625, W10438708, 1372146, 1518337, AP3996841, AP6007247, ESF-U2B, EAP11740359, PD00021608, PS11740359, and PS1518337. Important: don't forget to transfer the two rubber grommets from your old motor to the new one for proper mounting. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO 2315539 Refrigerator Evaporator Fan Motor fixes Whirlpool, Kenmore, Maytag, KitchenAid, and Amana refrigerators with excessive noise from the freezer area, ice buildup in the freezer, or where the fresh food section is warm but the freezer is still cold. Includes incorporated wire harness and plug. 115V, 60Hz, clockwise rotation. Transfer rubber grommets from old motor for mounting. Replaces WP2315539, WP2315539VP, 2219689, 2225625, W10438708, 1372146, AP3996841, AP6007247, ESF-U2B, EAP11740359, PS11740359, PS1518337.
Common Problems This Part Fixes
Excessive noise from the freezer area — most common symptom of evaporator fan motor failure
Loud humming, whining, grinding, or scraping noises during operation
Freezer compartment cold but fresh food section warm — cool air not being circulated
Heavy ice buildup on the evaporator coils or rear freezer wall
Refrigerator running continuously trying to maintain temperature
Fan blade not spinning freely or seized when checked by hand
Motor failing continuity test with a multimeter
Visible damage to the fan motor housing or harness
Replaces Part Numbers
This evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WP2315539, 2315539, W10438708, 1372146, 2219689, 2225625, ESF-U2B, AP6007247, AWP47336, EAP11740359, PD00003243, PS11740359.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select refrigerators from the following brands:
Whirlpool refrigerators (top-mount, side-by-side, and Gold series — select models)
Kenmore / Sears refrigerators (Whirlpool-built — select 106-series and related models)
Maytag refrigerators (select models)
KitchenAid refrigerators (select models)
Amana refrigerators (select models)
Roper refrigerators (select models)
Crosley refrigerators (select models)
Admiral refrigerators (select models)
Estate refrigerators (select models)
Inglis refrigerators (select models)
Ikea refrigerators (select Whirlpool-built models)
Gladiator refrigerators (select models)
Note: This motor includes an incorporated wire harness. If your old motor has a separate wire harness (not incorporated), confirm the correct part with our support team before ordering. Always verify your model number first. Remember to transfer the two rubber grommets from your old motor to the new one — they're essential for proper mounting.
Key Features
Refrigerator/freezer evaporator fan motor — circulates cold air from the evaporator coils throughout both the freezer and fresh food compartments
Includes incorporated wire harness and plug — direct plug-in installation
Rated 115V, 60Hz — correct electrical specifications for compatible Whirlpool-platform refrigerators
Clockwise motor rotation
Replaces WP2315539, WP2315539VP, 2219689, 2225625, W10438708, 1372146, AP3996841, AP6007247, ESF-U2B, PS11740359, PS1518337, and additional cross-references
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Admiral, Estate, Inglis, Ikea, and Gladiator refrigerators
Important: transfer the two rubber grommets from the old motor to the new one for proper mounting
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
2315539
OEM Part Number
WP2315539
Part Type
Refrigerator Evaporator Fan Motor (Freezer Section)
Condition
Aftermarket Replacement
Application
Refrigerators (Whirlpool platform)
Voltage
115V AC
Frequency
60 Hz
Rotation
Clockwise
Wire Harness
Incorporated wire harness and plug included
Mounting
Transfer two rubber grommets from old motor
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Admiral, Estate, Inglis, Ikea, Gladiator
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor is located behind the rear access panel inside the freezer compartment. Remove the freezer shelves and any internal components blocking access to the rear panel. Remove the screws holding the rear access panel to expose the evaporator coils and fan motor (a 1/4" hex driver is commonly needed). Photograph the wire connections and fan blade orientation before disconnecting. Disconnect the wire harness connector from the old motor. Note the orientation of the fan blade on the motor shaft and the position of the two rubber mounting grommets — both must be transferred to the new motor. Remove the mounting screws or release the motor from its bracket, and pull the old motor free. Transfer the rubber grommets and fan blade (if not pre-installed) to the new 2315539 motor in the same orientation. Install the new motor in the same position, reconnect the wire harness, and reinstall the access panel and shelves. Plug the refrigerator back in and allow several hours for the unit to return to its set temperature before reloading with food. Tools needed: 1/4" hex driver, Phillips screwdriver, flathead screwdriver, work gloves.
Frequently Asked Questions
My freezer is making loud noise — is it the evaporator fan motor?
Yes, this is the most recognizable symptom of a failed evaporator fan motor on Whirlpool-platform refrigerators. When the motor's bearings wear out, it produces loud humming, whining, grinding, or scraping noises during operation. The noise often varies as the fan speed changes or as ice builds up around the fan blade. To confirm, unplug the refrigerator and access the fan behind the rear freezer panel — try turning the blade by hand. If it doesn't spin freely, is stiff, or seizes, the motor bearing has failed and needs replacement.
My freezer is cold but my fridge is warm — could this be the cause?
Yes — on many Whirlpool-platform refrigerators, the freezer's evaporator fan motor is responsible for circulating cool air from the freezer evaporator into the fresh food compartment as well. When this fan fails, the freezer's own compartment may stay cold because the cold air is generated right there, but the fresh food section warms up because no air is being moved into it. If your fridge is warm while the freezer remains cold, this is a likely cause — especially if you also hear unusual noise from the freezer area or see ice buildup on the evaporator coils.
What is the difference between 2315539 and WP2315539?
These are the same evaporator fan motor. WP2315539 is the updated Whirlpool OEM part number that superseded the original 2315539. The 2219689, 2225625, W10438708, and ESF-U2B are also cross-references for this same motor across various Whirlpool catalog revisions and production runs. This aftermarket replacement is compatible with all of these numbers.
Why do I need to transfer the rubber grommets from the old motor?
The two rubber grommets seat between the motor housing and the mounting bracket inside the refrigerator. They isolate the motor from the cabinet to dampen vibration and reduce noise during operation, and they also keep the motor properly positioned in its mount. The new 2315539 typically ships without these grommets — they are reused from the old motor. Remove them carefully from the old motor before discarding it, and slide them onto the new motor in the same positions. Without the grommets, the motor may run noisily or vibrate excessively.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the dimensions, electrical specifications (115V AC, 60Hz, clockwise rotation), incorporated wire harness, and function of the original WP2315539/2315539 evaporator fan motor.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
809069207 Refrigerator Genuine OEM Evaporator Fan Motor – Compatible with Frigidaire, Electrolux, and Kenmore Refrigerators
Product Description
Restore powerful and consistent cooling with the 809069207 Refrigerator Genuine OEM Evaporator Fan Motor. This factory-approved motor circulates cold air throughout the refrigerator and freezer compartments, ensuring even temperature distribution. A failing fan motor can cause warm spots, frost buildup, poor cooling, or unusual noises. Replacing it with this Genuine OEM part ensures dependable performance and the same airflow efficiency your appliance had when new.
Replaces Part Numbers
809069207, PD00064424, EAP12705983, AP6834878, PS12705983.
Compatibility
This Genuine OEM evaporator fan motor fits select Frigidaire, Electrolux, and Kenmore refrigerators.
Example compatible models include (but are not limited to):Frigidaire FFHS2622MB3, FFSS2615TS0, Electrolux EI23CS55GS1, and Kenmore 253.7031321A.
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🧩 Genuine OEM Replacement – Factory-certified for perfect fit and long-lasting performance
❄️ Restores Air Circulation – Ensures even cooling in fresh food and freezer sections
🔇 Quiet Motor Operation – Balanced OEM motor design lowers noise and vibration
💪 High Durability – Built with premium materials for extended service life
🛡️ Fixes Common Issues – Solves poor cooling, frost buildup, noisy fan, or warm temperatures
📐 Product Specification
Part Number: 809069207
Component Type: Refrigerator Evaporator Fan Motor
Material: Reinforced plastic fan housing with factory motor
Voltage: 115V AC (model dependent)
Mounting: Direct-fit motor mounted behind freezer interior panel
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the refrigerator before servicing to avoid electrical shock.
Steps:
Disconnect power and remove freezer shelves and panels.
Locate the evaporator fan assembly.
Disconnect the wiring harness and remove the old motor.
Install the new 809069207 motor in the same location.
Reassemble interior panels and restore power.
Allow several minutes for airflow to stabilize.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Genuine OEM Replacement Part
🔄 30-Day Return Policy
Restore powerful, even cooling — Add to Cart Now for a factory-quality repair!
XPARTCO W10384183 Refrigerator Thermistor Replaces WPW10384183
The XPARTCO W10384183 is an aftermarket replacement thermistor for Whirlpool refrigerators, and also fits select Kenmore, Maytag, Amana, KitchenAid, and Ikea models. This sensor detects the temperature inside the refrigerator or freezer and sends that reading to the electronic control board, which uses it to regulate cooling and manage the defrost cycle.
Finished in black and white, made of plastic and metal, this thermistor measures approximately 4-1/2"L x 9/16"W x 1/4"H, with a 1" probe and a 3.5" lead. Includes the thermistor with its probe and wiring harness/plug. Over time, the sensor's electronics can drift or fail from age or moisture exposure. Because this sensor also plays a role in the defrost cycle on many models, a failing thermistor can cause the evaporator coils to overly frost or ice up, blocking airflow and preventing cool air from reaching the refrigerator compartment even though the freezer itself may still seem cold. Symptoms include inconsistent cooling, a refrigerator that isn't cooling despite a cold freezer, or the appliance failing to defrost properly. It directly replaces WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996.
Quick Answer
The XPARTCO W10384183 Refrigerator Thermistor fixes Whirlpool, Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators with inconsistent cooling, a refrigerator compartment that isn't cooling despite a cold freezer, or improper defrosting. Black/white, plastic/metal, ~4-1/2"L x 9/16"W x 1/4"H, 1" probe, 3.5" lead. Replaces WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996. If your freezer's evaporator coils are heavily frosted or iced over, blocking airflow into the refrigerator, this thermistor is a strong candidate for the cause.
Common Problems This Part Fixes
Inconsistent cooling in the refrigerator or freezer compartment
Refrigerator not cooling despite the freezer feeling cold
Evaporator coils overly frosted or iced over, blocking airflow
Refrigerator not defrosting properly
Temperature fluctuations affecting food freshness
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator thermistor directly replaces the following OEM and cross-reference part numbers:
WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermistor is compatible with select Whirlpool refrigerators, and also fits select Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators built on the Whirlpool platform.
Note: A related but separate thermistor, W10384184, is used on some of the same or similar models and is sometimes sold as a paired kit alongside this part. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which thermistor your refrigerator needs.
Key Features
Aftermarket replacement thermistor — senses temperature and reports to the electronic control
Resolves "inconsistent cooling," "refrigerator not cooling despite cold freezer," and "improper defrosting" symptoms
Includes thermistor with probe and wiring harness/plug
Black/white, plastic/metal construction
Direct drop-in replacement — no modification required
Replaces WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996
Compatible with Whirlpool, Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Typical repair takes 30 to 60 minutes
Product Specifications
Part Number
W10384183
OEM Part Number
WPW10384183
Part Type
Refrigerator Thermistor
Condition
Aftermarket Replacement
Color
Black / White
Compatible Brands
Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Ikea
Includes
Thermistor with probe and harness/plug
Function
Senses internal temperature and reports to the electronic control
Repair Difficulty
Easy to Moderate — 30 to 60 minutes
Quantity
1 thermistor
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Defrost Any Iced-Over Coils First Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Remove the interior panel covering the evaporator coils, typically located in the freezer. If the coils and fins are heavily frosted or iced over, allow them to fully defrost before continuing — you can speed this up with a hair dryer on a low setting, kept a safe distance away, or simply let the unit sit unplugged with the door open for a few hours. With the coils clear, locate the old thermistor and unclip it from its mounting position, noting how it's routed. Unclip the wiring harness from the old thermistor. Clip the new W10384183 thermistor into the same position, and reconnect the wiring harness fully, making sure the probe is positioned exactly as the original was. Reinstall the interior panel. Restore power and monitor the refrigerator's temperature over the next 24 hours to confirm consistent, accurate cooling and normal defrost cycling have returned. Tools needed: sockets, screwdriver, multimeter (for testing the old sensor), work gloves.
Frequently Asked Questions
My freezer feels cold but the refrigerator side isn't cooling. Is this the part I need?
Yes, this is a documented pattern tied to this thermistor. One customer described their evaporator coils and fins as "overly freezing," which blocked cool air from reaching the refrigerator compartment even though the freezer itself was fine. Replacing this thermistor, after first defrosting the iced-over coils, resolved the issue.
My refrigerator isn't defrosting properly. Could this be the cause?
Yes, this is a documented symptom. One customer specifically described their unit "not defrosting" and resolved it by replacing this sensor, calling the repair "very straightforward." Since this thermistor feeds temperature data into the defrost cycle on many models, a failing sensor can prevent the defrost system from operating correctly.
Do I need to defrost the coils before replacing this part?
If your evaporator coils are heavily frosted or iced over, yes — clear that ice first so you can properly access and route the new thermistor, and so you can accurately judge whether the repair has resolved the airflow problem once everything is back together.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the sensing function, probe design, and wiring harness configuration of the original WPW10384183 thermistor used in compatible Whirlpool, Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WR60X10318 Genuine OEM GE Refrigerator Evaporator Fan Motor
The WR60X10318 is a genuine GE OEM evaporator fan motor assembly used in side-by-side refrigerators, complete with an integrated 2-wire thermistor built right into its 6-pin wiring harness. This motor draws air across the evaporator coil and circulates it through both the fresh food and freezer compartments, while the built-in thermistor reports temperature back to the control board so it can regulate cooling accurately. Because the thermistor and fan motor arrive as a single assembly, a fault in either function shows up together, and replacing this one part addresses both.
The harness and plug measure approximately 13-7/8" in length. Common failure causes include worn motor bearings that eventually seize the shaft entirely, debris or ice buildup around the fan blade, and general electrical wear over time. On this side-by-side platform, a classic failure sequence is a bearing that starts out noisy, then progressively worsens until the motor freezes up completely — once the fan stops moving air, the evaporator coil often ices over heavily since moisture keeps accumulating with nowhere for the resulting cold air to go. Symptoms include unusual noise from the freezer, inconsistent or warm temperatures in either compartment, visible frost buildup on the coil, and a refrigerator that runs continuously trying to compensate. It directly replaces AP4981643, PS3487992, EAP3487992, and 1812462.
Quick Answer
The WR60X10318 Genuine OEM GE Refrigerator Evaporator Fan Motor fixes GE side-by-side refrigerators with unusual noise from the freezer, warm or inconsistent temperatures, frost or ice buildup on the evaporator coil, or a refrigerator running constantly. Complete assembly with integrated 2-wire thermistor on a 6-pin, 13-7/8" harness. Replaces AP4981643, PS3487992, EAP3487992, 1812462. Not the same part as our WR60X10307 or WR60X10185 listings — those are separate motors for different GE refrigerator platforms.
Common Problems This Part Fixes
Unusual noise — grinding, buzzing, or humming — coming from the freezer compartment
Inconsistent or warm temperatures in the fresh food or freezer compartment, or both
Visible frost or ice buildup on the evaporator coil
Refrigerator running continuously as it struggles to maintain temperature
Fan motor bearing noise that has progressively worsened, sometimes ending in the motor seizing entirely
Freezer icing over heavily while temperatures in both compartments climb
Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10318, AP4981643, AGE29310, OEM14944938, PD00023381, PS3487992, EAP3487992, 1812462
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE side-by-side refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, and Kenmore refrigerators built on the GE platform. In rare instances, this part is also referenced for compatibility with some LG models.
Note: GE uses several different evaporator fan motors across its refrigerator lineup. This WR60X10318 assembly is a separate part from our WR60X10307 and WR60X10185 listings, which serve different model platforms and have their own distinct cross-reference numbers. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs.
Key Features
Genuine GE OEM part — factory-specified motor, blade, and integrated thermistor design
Complete assembly — includes the fan motor plus a 2-wire thermistor built into the 6-pin harness
Resolves "unusual noise from the freezer," "warm or inconsistent temperatures," "frost or ice buildup," and "runs continuously" symptoms caused by fan motor failure
Approximately 13-7/8" harness and plug length
Direct drop-in replacement matching the original mounting and blade fitment
Replaces AP4981643, PS3487992, EAP3487992, and 1812462
Genuine OEM replacement — guaranteed fit, materials, and performance
DIY-friendly repair, though side-by-side units can have tight working clearance around the fan
Product Specifications
Part Number
WR60X10318
Part Type
Refrigerator Evaporator Fan Motor Assembly (with Thermistor)
Condition
Genuine OEM
Brand
GE
Application
Side-by-Side Refrigerators
Integrated Component
2-wire thermistor built into the wiring harness
Harness Connector
6-pin
Harness/Plug Length
Approx. 13-7/8 in.
Production Numbers
197D4964G011, FDQT26GE7
Quantity
1 fan motor assembly
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Side-by-Side Units May Have Tight Clearance Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. On side-by-side models, access can be tight: you may need to remove the rear interior panel, the ice maker, and a fan cover to reach the motor, so budget extra time and patience compared to a simpler platform. If the evaporator coil is heavily iced over, let the unit sit unplugged with the door open for several hours, or run a manual defrost, before continuing — ice can make the old motor difficult to remove cleanly and may be masking the actual point of failure. Photograph the 6-pin wiring harness connector and the fan blade's orientation before disconnecting anything. Remove the mounting screws holding the fan assembly in place, unplug the wiring harness connector, and slide the old assembly out of its housing. Slide the new WR60X10318 assembly into the same housing, secure it with the mounting screws, and reconnect the harness connector fully. Confirm the blade spins freely by hand without contacting the housing before reassembling the fan cover, ice maker, and rear panel. Restore power, open the door to test the fan, and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, 1/4" and 5/16" nut drivers, work gloves, and a headlamp or flashlight for visibility in tight spaces.
Frequently Asked Questions
My freezer is heavily iced over and both compartments are warm. Is this the fan motor?
Yes, this is a very common failure sequence on this platform. Once the evaporator fan motor's bearings wear out and the motor slows or seizes, air stops circulating away from the coil, moisture keeps condensing on it, and ice builds up heavily. Once that happens, both the freezer and fresh food compartments typically lose cooling together, since neither is getting circulated cold air anymore. Thawing the ice and confirming the fan motor doesn't spin freely by hand will confirm this diagnosis.
Does this include the thermistor, or do I need to buy that separately?
It's included. This assembly ships with a 2-wire thermistor built directly into the 6-pin wiring harness, so you don't need to source or install a separate thermistor component — replacing this one part addresses both the fan motor and the thermistor together.
Why is access so tight on my side-by-side refrigerator?
Side-by-side refrigerators tend to pack components more tightly than French door or top-freezer models, and this evaporator fan often sits behind the ice maker and a dedicated fan cover in addition to the rear interior panel. Removing all of these takes more time than a simpler platform, but the fan motor itself installs the same straightforward way once you have access — a headlamp or flashlight helps considerably in the tighter space.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It includes the same motor design, fan blade, integrated thermistor, and 6-pin harness configuration as the evaporator fan motor assembly originally installed in your side-by-side refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine Whirlpool WPW10392132 Refrigerator Defrost Thermostat - Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana
Product Description
Maintain optimal cooling with the Genuine Whirlpool WPW10392132 Refrigerator Defrost Thermostat. This OEM defrost thermostat is designed for select Whirlpool, Kenmore, KitchenAid, Maytag, and Amana refrigerators, monitoring evaporator coil temperature to regulate the defrost cycle, preventing frost buildup and ensuring efficient cooling. It addresses issues like frost accumulation, warm refrigerator temperatures, or freezer not cooling properly, delivering reliable performance as an authentic Whirlpool part.
Note: Includes one defrost thermostat with two-wire connector. Disconnect power before installation. Check defrost heater and related components for optimal performance.
Replaces part numbers: WPW10392132, AP6020798, W10392132, PD00028150, EAP11754118, 2118359, PS11754118.
Compatibility:
Compatible with models including but not limited to:
Whirlpool: ED5FVGXWS00, ED5VHGXMB10, ED5VHGXML10, GD5DHAXVY00, WRS325FDAM02
Kenmore: 106.51132210, 106.51133210, 106.51173310
KitchenAid: KSRJ25FXMS00, KSRL25FXMT00
Maytag: MSD2559XEM01, MFI2569VEM10
Amana: ASD2522WRB02, ASD2522WRW01
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, KitchenAid, Maytag, and Amana refrigerators.
❄️ Specifications: OEM defrost thermostat, two-wire connector.
💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability.
🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 20–30 minutes.
🛡️ Effective Fixes: Resolves frost buildup, warm refrigerator temperatures, or freezer not cooling properly.
Product Specification
Part Number: Genuine Whirlpool WPW10392132
Component Type: Refrigerator defrost thermostat
Material: Metal and plastic with sealed sensor
Electrical Specs: 120V compatible
Mounting: Clip-mounted on evaporator coil
Operating Conditions: Suitable for low-temperature refrigerator environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your refrigerator cooling efficiently today!
Add to cart now for a reliable fix!
