XPARTCO LA1053 Dryer Thermostat Kit – Replaces LA-1053 – Compatible with Whirlpool, Maytag, Admiral, and Amana Dryers
Product Description
Restore proper dryer temperature control with the XPARTCO LA1053 Dryer Thermostat Kit. This Dryer Thermostat Kit is a replacement part for specific Maytag, Whirlpool dryer models. This kit includes a high-limit thermostat and a thermal fuse, both of which are crucial for regulating the dryer’s temperature. The high-limit thermostat prevents the dryer from overheating, while the thermal fuse will cut off power if a critical temperature is exceeded, ensuring safety. The kit includes a high-limit thermostat (53-0771) and two thermal fuses.
53-1096 (blue dot for Gas)
53-1182 (Red dot for Electric)
Replaces Part Numbers
LA-1053, 3344, 53-0143, 53-0170, 53-0261, 53-1133, 53-1526, AH2162282, EA2162282, ERLA1053, ET403, ET405, K35-601, LA-1053VP, LA1053, SET405, TJ90SET405, 531526, 531182, 531133, 530261, LA1053, 530143, WP53-1182, 53-1182, 53-0143, 53-1096 , L248-80F, PD00002446, EAP2162282, AP4242472, PS2162282, WP53-0771, 53-0771, 1422, 53-0306, 53-1037, 53-1459, ER53-0771, SET176, TJSET176, AP6009638, PS11742806, WP53-1096, 53-1096, 4434853, AP6009640, PS11742808.
Compatibility
This replacement thermostat kit fits select Whirlpool, Maytag, Admiral, and Amana dryers.
Example compatible models include (but are not limited to): Maytag DE303, Whirlpool LDE8824ACE, and Amana LEA30AW.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Compatibility – Compatible with Whirlpool, Maytag, Admiral, and Amana dryers
🔥 Complete Kit – Includes cycling thermostat, high-limit thermostat, and thermal fuse. Dryer thermal fuse and high limit thermostat kit for both gas and electric models. If the dryer does not heat then the thermal fuse may have blown and will need to be replaced.
💰 Cost-Effective Repair – Replaces multiple components in one package
🛠️ Easy to Install – Direct-fit parts require only basic tools
🛡️ Fixes Common Issues – Resolves dryers not heating, overheating, or shutting off early
📐 Product Specification
Part Number: LA1053
Component Type: Dryer Thermostat and Thermal Fuse Kit
Material: Heat-resistant metal with high-quality electrical connectors
Mounting: Direct-fit replacement on heater housing and blower housing
Operating Conditions: Designed for residential electric dryers
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before performing any repairs to prevent electrical shock.
Steps:
Unplug the dryer and remove the rear access panel.
Locate the thermostat and thermal fuse on the heater housing.
Remove screws securing the old components and disconnect wires.
Install the new thermostats and fuse from the XPARTCO LA1053 kit.
Reconnect wiring, reinstall the back panel, and restore power.
Run a test cycle to confirm proper heating and temperature control.
⏱️ Time Required: 20–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Get your dryer running safely and efficiently again — Add to Cart Now for a reliable, budget-friendly repair kit!
WE4X444 Gas Dryer Genuine Igniter
Replaces Part Numbers:WE4X444, WE04X0444, WE11X0096, WE4X444R, AH268028, EA268028, OEM8170538, AP2042634, PS268028, WP4392003, 4392003, 14200046, 3-3376, 303376, 41-982, 4392003BULK, 55438, 55438-6, 63-5010, 63-5877, DE350, K35-106, K35-368, R0611505, OEM24037398, AP6009349, PS11742507.
Description: This Gas Dryer Igniter is a replacement part for specific GE, Hotpoint, Whirlpool dryer models. This essential component is responsible for igniting the gas in the burner, allowing the dryer to heat up and effectively dry your clothes. The igniter heats up to a high temperature to ignite the gas, starting the heating process necessary for drying.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WE04X24550 Dryer Genuine OEM Timer
Fits Specific GE Dryer Models
Replaces Part Numbers: WE04X24550, WE04X24549, 4546121, AP6031056, PS11763064.
Description: This Dryer Timer is a Genuine OEM part for select GE dryer models. This timer controls the length of the drying cycle by regulating the electrical components of the dryer, such as the heating element and motor. It ensures that the appliance runs for the set amount of time and shuts off automatically at the end of the cycle.
Key Features:
✅ Genuine OEM Part for GE Dryer
🔁 Also replaces: WE04X24549, 4546121, AP6031056, PS11763064.
🕒 Controls cycle duration and mode selection
🛠️ Compatible with many GE, Hotpoint, and RCA dryers
🧰 Direct-fit, plug-in installation
⚠️ Unplug the dryer before servicing. Contact us to confirm fit for your specific model.
📦 Part Number: WE04X24550
Genuine Whirlpool WP6-3037050 Dryer Idler Pulley - Compatible with Maytag, Whirlpool, Kenmore
Product Description
Ensure smooth dryer operation with the Genuine Whirlpool WP6-3037050 Dryer Idler Pulley. This OEM part is designed for select Maytag, Whirlpool, and Kenmore dryers, maintaining precise tension on the dryer drum belt to support efficient drum rotation. Constructed with high-quality materials, it delivers superior durability, addressing issues like drum not tumbling, squeaking noises, or belt slippage.
Note: Includes one idler pulley with bearing. Disconnect power before installation. Lubricate periodically to extend lifespan.
Replaces part numbers: WP6-3037050, 6-3037050, 3-3705, 303705, DE405, ER303705, K35-266, TJ90DE405, WP6-3037050VP, Y303705, PS11743028, EAP11743028, AP6009855, PS11743028.
Compatibility:
Compatible with models including but not limited to:
Maytag: LDG7600ABL, DG7500, LDG7800ABW, LDE9606ACE, LDG8410ABW, LDG4910AAW, LDG7500AAW, LDG7480ABW, GDE7500, LDG7600AGW
Whirlpool: LTE6234DQ0, LER4634JQ0, LGR4634EZ0
Kenmore: 110.97561601, 110.97561801
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Maytag, Whirlpool, and Kenmore dryers.
🔐 Specifications: OEM idler pulley with bearing, designed for precise belt tension.
💪 Reliable Performance: High-quality construction ensures long-lasting operation and smooth drum rotation.
🛠️ Easy Installation: Requires screwdriver, putty knife, and nut driver; typically installed in 30–45 minutes.
🛡️ Effective Fixes: Resolves drum not tumbling, squealing or thumping noises, or belt slippage.
Product Specification
Part Number: Genuine Whirlpool WP6-3037050
Component Type: Dryer idler pulley
Material: Plastic wheel with metal bearing
Mounting: Spring-loaded arm, screw-mounted, located near motor and drum
Operating Conditions: Suitable for household dryer environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your dryer running smoothly today!
Add to cart now for a reliable fix!
XPARTCO 6931EL3001E Dryer Thermostat – Compatible with LG and Kenmore Dryers
Product Description
Maintain proper dryer safety and temperature control with the 6931EL3001E Dryer Thermostat. This replacement part monitors and regulates dryer temperature to prevent overheating and ensure efficient drying cycles. A faulty thermostat may cause your dryer to stop heating, overheat, or shut off unexpectedly. Replacing it restores reliable performance and helps extend the life of your dryer.
Replaces Part Numbers
6931EL3001E, 1268363, 6931EL3001B, 6931EL3001C, AH3530481, EA3530481, PD00023869, EAP3530481, AP4440977, PS3530481, L125-31C, 503475.
Compatibility
This dryer thermostat is compatible with select LG and Kenmore dryer models.
Example compatible models include (but are not limited to): LG DLE2516W, DLE7177WM, and Kenmore 796.80272900.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Broad Compatibility – Fits select LG and Kenmore dryers
🔒 Reliable Safety – Prevents overheating by regulating dryer temperature
💰 Cost-Effective Replacement – OEM-equivalent performance at a lower price
🛠️ DIY-Friendly – Quick installation with basic tools
🛡️ Fixes Common Issues – Restores heating, prevents overheating, and fixes dryer shutdown problems
📐 Product Specification
Part Number: XP6931EL3001E
Component Type: Dryer Thermostat
Material: High-heat resistant metal and thermal components
Mounting: Direct replacement, mounts on heating element housing
Operating Conditions: Designed for residential dryers
Compliance: OEM-equivalent performance and safety standards
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, flathead screwdriver, needle-nose pliers
⚠️ Safety First: Always disconnect power before starting repairs to avoid electrical shock.
Steps:
Unplug dryer and remove back access panel.
Locate thermostat on heating element housing.
Disconnect wire terminals from the old thermostat.
Remove screws holding it in place and replace with the new thermostat.
Reconnect wires, secure the component, and reinstall the access panel.
Restore power and test dryer operation.
⏱️ Time Required: 15–20 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore your dryer’s safe operation today — Add to Cart Now for fast, budget-friendly repair!
WE4M488 Dryer Control Board
Replaces Part Numbers: WE4M488, 2218486, WE4M331, WE4M388, AH3487192, EA3487192, AP4980176, PS3487192.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO WE05X20431 Dryer Light Bulb
The XPARTCO WE05X20431 is an aftermarket replacement drum light bulb for GE, Hotpoint, Whirlpool, and Kenmore dryers. Also called a drum lamp, this small bulb mounts inside the dryer cabinet and illuminates the drum whenever the door is opened, making it easy to spot small items and confirm the drum is fully empty before starting a new load. It's a simple part, but when it burns out it's easy to notice — you open the door and the interior stays dark.
Rated 10W at 120V with an E12 (candelabra) base, measuring approximately 1-5/8"H x 5/8"W x 5/8"D. Like any incandescent bulb, it will eventually burn out from normal use and the heat it's exposed to inside a working dryer. It directly replaces WE4M305, WE4X718, WE04X718, WE04X0718, WE04M0305, AP3794707, AP5956400, 1063664, AH960329, EA960329, PS960329, and PS10063224.
Quick Answer
The XPARTCO WE05X20431 Dryer Light Bulb fixes GE, Hotpoint, Whirlpool, and Kenmore dryers where the interior drum light doesn't turn on when the door is opened. 10W, 120V, E12 base. Replaces WE4M305, WE4X718, WE04X718, WE04X0718, WE04M0305, AP3794707, AP5956400, 1063664, AH960329, EA960329, PS960329, PS10063224. No tools required — the bulb installs at a slight angle, not straight in.
Common Problems This Part Fixes
Dryer drum light doesn't turn on when the door is opened
Interior lighting is dim, flickering, or inconsistent
Bulb has visibly burned out or gone dark
Difficulty seeing small items left in the drum before starting a load
Light worked before but stopped after normal use over time
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer light bulb directly replaces the following OEM and cross-reference part numbers:
WE05X20431, WE4M305, WE4X718, WE04X718, WE04X0718, WE04M0305, AP3794707, AP5956400, 1063664, EAP10063224, PS10063224, AGE25386, PD00028741
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum light bulb is compatible with select GE and Hotpoint dryers, and also fits select Whirlpool and Kenmore dryers using the same E12-base bulb, including model numbers such as GTD42EASJ2WW and DCVH680GJ2MS.
Note: Always verify your full model number before ordering, since dryer light bulbs vary in base type and wattage across different platforms. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement drum light bulb — illuminates the dryer interior when the door is opened
Resolves "light doesn't turn on," "dim or flickering light," and "burned-out bulb" symptoms
10W, 120V, E12 (candelabra) base
Compact size: approximately 1-5/8"H x 5/8"W x 5/8"D
Built to withstand the heat and vibration of normal dryer operation
No tools required — simple screw-in installation
Replaces WE4M305, WE4X718, WE04X718, WE04X0718, WE04M0305, AP3794707, AP5956400, 1063664, AH960329, EA960329, PS960329, and PS10063224
Compatible with GE, Hotpoint, Whirlpool, and Kenmore dryers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
WE05X20431
OEM Part Number
WE05X20431
Part Type
Dryer Drum Light Bulb (Drum Lamp)
Condition
Aftermarket Replacement
Wattage
10 W
Voltage
120V
Base Type
E12 (candelabra)
Dimensions
1-5/8"H x 5/8"W x 5/8"D
Repair Difficulty
Very Easy — no tools required
Quantity
1 bulb
Compatible Brands
GE, Hotpoint, Whirlpool, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — Let The Old Bulb Cool First Disconnect power at the outlet or shut off the circuit breaker before beginning. If the dryer was recently run, allow the bulb to cool before touching it. Locate the light fixture inside the top section of the dryer interior. Unscrew the old bulb by turning it three to four turns to release it from the socket. When installing the new bulb, it cannot be screwed straight in — lean it at roughly a 45-degree angle to engage the socket threads, then turn it to seat and tighten. Avoid touching the glass directly with bare fingers if possible, since oils can shorten bulb life. Restore power and open the dryer door to confirm the light turns on. Tools needed: none.
Frequently Asked Questions
Why won't the new bulb screw in straight?
This is normal for this fixture — the socket is angled, so the bulb needs to go in at roughly a 45-degree tilt to catch the threads properly rather than straight on. Once you find that angle, it threads in and seats normally.
Do I need any tools to replace this bulb?
No. This is a simple screw-in bulb replacement with no tools required — just unplug the dryer, unscrew the old bulb, and screw in the new one at the correct angle.
The light still doesn't work after I replaced the bulb. What else could it be?
If a new bulb doesn't resolve the issue, check the door switch that controls the light circuit, and confirm the socket and wiring aren't damaged. These are separate components from the bulb itself and would need to be diagnosed independently.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the wattage, voltage, base type, and dimensions of the original WE05X20431 bulb used in compatible GE, Hotpoint, Whirlpool, and Kenmore dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WPW10547292 Genuine OEM Whirlpool Dryer Idler Pulley
The WPW10547292 is a genuine Whirlpool OEM idler pulley assembly for Whirlpool, Maytag, and Kenmore dryers. This pulley sits to the left of the motor, just below the drum belt, and its job is to ride against the belt and keep constant tension on it as the motor turns — without that tension, the belt would sag, slip on the motor pulley, and fail to reliably turn the drum. The pulley wheel itself spins freely on a bearing mounted to a bracket, so as the belt moves, the pulley spins along with it under light load.
Over time, the bearing inside the pulley wheel wears out, causing it to spin roughly, seize partially, or bind up entirely instead of turning freely. When that happens, the belt drags against a pulley that should be spinning smoothly with it, generating friction, heat, and noise. A worn idler pulley produces a very recognizable symptom: a persistent squeaking or squealing sound during operation that often gets more noticeable over time, and in more advanced cases, a drum that struggles to spin or doesn't spin at all, or a burning smell as the seized pulley drags against the belt. It directly replaces W10547292, WPW10547292VP, AP6022817, 8547160, PS11756154, and LP16246.
Quick Answer
The WPW10547292 Genuine OEM Whirlpool Dryer Idler Pulley fixes Whirlpool, Maytag, and Kenmore dryers with a persistent squeaking or squealing noise during operation, a drum that struggles to spin, or a burning smell from a seized pulley dragging against the belt. Mounts to the left of the motor, below the belt. Replaces W10547292, WPW10547292VP, AP6022817, 8547160, PS11756154, LP16246. Consider replacing the drum belt (8544742/WP8544742) at the same time — a seized idler pulley is a common cause of premature belt wear, and you'll already have the cabinet open.
Common Problems This Part Fixes
Persistent squeaking or squealing noise during operation
Noise that gradually gets louder or more frequent over time
Drum that struggles to spin, spins intermittently, or won't spin at all
Burning smell coming from inside the dryer cabinet
Pulley wheel that feels stiff, gritty, or seized when checked by hand
Drive belt showing premature wear or fraying from dragging against a bound-up pulley
Noise that stops and starts depending on drum rotation or load size
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer idler pulley directly replaces the following OEM and cross-reference part numbers:
WPW10547292, W10547292, WPW10547292VP, AP6022817, 8547160, EAP11756154, PS11756154, AWP50878, PD00003590, LP16246
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This idler pulley is compatible with select Whirlpool, Maytag, and Kenmore dryers, including model numbers such as:
Whirlpool: WED7300XW0, WED7800XB0, WED8100BW0, WED8500BC0, WED8500BR0, WED8500BW0, WED8600YW0, WED8600YW1, 7MWGD7800XW0, 7MWGD8800AW0, 7MWGD8800AW1
Whirlpool (Y-prefix): YWED8000BW0, YWED8100BW0, YWED8200YW2, YWED8400YW2, YWED8500BC0, YWED8500BW0, YWED8800YC2, YWED8800YW2, YWED8900BC0, YWED8900BW0, YMEDB980BW0
Maytag: 7MMGDB850WL0, 7MMGDB950AG0, MEDB200VQ1, MEDB725BW0, MEDB800VB0, MEDB850WL1, MEDB850WR1
Kenmore: 110.78102310, 11067032600, 11067032601, 11067042600, 11067042601, 11067052600, 11067062600, 11067072600, 11067082600, 11067086600
Note: Whirlpool uses several different idler pulley designs across its dryer lineup, and they are NOT interchangeable. This WPW10547292 pulley is a separate part from the W10837240 pulley (used on Cabrio, Duet, and Bravos XL platforms) and the 279640 pulley (an older, differently-shaped design). Fitting the wrong pulley can result in a bracket that doesn't mount correctly or a wheel that doesn't align with your belt. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which pulley fits your dryer.
Key Features
Genuine Whirlpool OEM part — factory-specified bearing and bracket design
Maintains constant tension on the drive belt so it can turn the drum smoothly
Resolves "squeaking or squealing noise," "drum won't spin," and "burning smell" symptoms caused by a worn or seized pulley bearing
Complete wheel-and-bracket assembly — no need to source parts separately
Direct drop-in replacement — mounts to the original bracket position with the same bolt
Replaces W10547292, WPW10547292VP, AP6022817, 8547160, PS11756154, and LP16246
Compatible with Whirlpool, Maytag, and Kenmore dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WPW10547292
Part Type
Dryer Idler Pulley Assembly (Wheel + Bracket)
Condition
Genuine OEM
Brand
Whirlpool
Location
Left of the motor, below the drum belt
Function
Maintains tension on the drive belt as it turns the drum
Fuel Type
Electric and gas dryers
Companion Part
8544742 / WP8544742 drum belt (check/replace if pulley failed)
Repair Difficulty
Medium — requires some disassembly
Quantity
1 idler pulley assembly
Compatible Brands
Whirlpool, Maytag, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — On Gas Models, Shut Off The Gas Supply Too Disconnect power at the outlet or shut off the circuit breaker before beginning. On a gas dryer, also close the gas shutoff valve before moving the cabinet. Wear work gloves. Remove the lint filter, then remove the screws along the top edge of the front panel and take the panel off. With the front open, locate the belt tensioner pulley — it sits to the left of the motor, just below the belt. Use a socket wrench with an extension to loosen the pulley's mounting bolt, then remove the old pulley assembly, releasing the belt from it as you go. Slide the new WPW10547292 assembly onto the mounting post, making sure the grooves line up correctly so the belt seats snugly against the wheel, then re-tighten the mounting bolt securely. Before closing everything up, spin the new pulley by hand to confirm it turns freely with no grinding or resistance, and inspect the belt for wear, glazing, or fraying — replace it as well if it shows any of these signs, since a worn belt will quickly wear out even a brand-new pulley. Reinstall the front panel and its screws, restore power, and run a short empty cycle listening for the squeak to confirm it's resolved. Tools needed: 1/4" nut driver, 3/8" socket wrench with extension, Phillips screwdriver, work gloves.
Frequently Asked Questions
My dryer squeaks constantly. Is this definitely the idler pulley?
It's one of the most common causes of a persistent squeak, especially if the noise is steady and present throughout the cycle rather than only at certain moments. The pulley's internal bearing wears out over years of use, and a worn bearing produces exactly this kind of ongoing squeal as it spins roughly instead of smoothly. If you can access the pulley and spin it by hand, feeling any grinding or stiffness confirms the diagnosis.
Is this a hard repair, or can I do it myself?
It's a moderate repair — you'll need to remove the front panel and access the area behind the motor, which some customers describe as needing to "pull the entire dryer apart" to reach the pulley. It's very doable with basic hand tools and some patience, but budget more time than a simple part swap, and expect to use a socket wrench with an extension to reach the mounting bolt in that tighter space.
Should I replace the belt while I'm already in there?
It's worth strongly considering. A seized or dragging pulley puts extra wear on the belt, so if your pulley failed from being seized rather than just noisy, the belt may already be showing damage. Since you'll already have the cabinet open and the belt exposed, inspecting it — and replacing it if it shows glazing, cracking, or fraying — saves you from repeating this same teardown again soon after.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original bearing design, bracket shape, and mounting configuration of the idler pulley assembly originally installed in your Whirlpool, Maytag, or Kenmore dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 35001087 Dryer Thermal Cut Off - Compatible with Samsung, Kenmore, Maytag Dryers
Product Description
Safeguard your dryer with the replacement XPARTCO 35001087 Dryer Thermal Cut Off. This thermal cut-off fuse is designed for select Samsung, Kenmore, and Maytag dryers, shutting off the heating element or burner when the dryer overheats to prevent fires or damage. It addresses issues like no heat, failure to start, or premature shutoff, offering a cost-effective alternative to OEM parts.
Note: Includes one thermal cut-off fuse with two 1/4" male spade terminals. Disconnect power before installation.
Replaces part numbers: WP35001087, 35001087, 1122480, PD00003747, EAP11741821, AP6008681, PS11741821.
Compatibility:
Compatible with models including but not limited to:
Samsung: DV203AES, DV209AEW/XAA-0000, DV210AEW/XAA, DV42H5000EW/A3, DV45H7000EW/A2, DV48H7400EW/A2
Kenmore: 40289032010, 40289032011, 40299032010, 40299032012
Maytag: MDE3000AYW, MEDB200VQ0, MEDB850WB0
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung, Kenmore, Maytag, Amana, and Inglis dryers.
🔥 Specifications: replacement thermal cut-off fuse, opens at 185°F (85°C), 25A at 125/250VAC.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, pliers, work gloves; typically installed in 15–20 minutes.
🛡️ Effective Fixes: Resolves no heat, failure to start, or premature shutoff due to overheating.
Product Specification
Part Number: XPARTCO 35001087
Component Type: Thermal cut-off fuse
Material: Plastic and metal
Electrical Specs: 25A at 125/250VAC, opens at 185°F (85°C)
Mounting: Two 1/4" male spade terminals, 1" between mounting holes (center to center)
Operating Conditions: Suitable for high-temperature dryer environments
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer safe and operational today!
Add to cart now for a budget-friendly fix!
W11189144 Genuine OEM Dryer Felt Drum Seal - Compatible with Whirlpool, Maytag, Kenmore
Product Description
Maintain your dryer’s efficiency with the W11189144 Genuine OEM Dryer Felt Drum Seal. This Whirlpool-manufactured felt seal is designed as a replacement for select Whirlpool, Maytag, Kenmore, and other compatible dryers. It wraps around the drum, creating a protective barrier between the drum and the cabinet to prevent air leaks, lint buildup, and debris accumulation. This part addresses issues like excess lint near the door, dust inside the dryer, or longer drying times due to reduced airflow efficiency, often caused by wear from regular use or high-heat conditions.
Note: Includes (1) felt drum seal. Disconnect power before installation. Verify compatibility with your dryer model.
Replaces part numbers: W11189144, W10664120, 4547089, AP6286713, PS12348807, PD00049832, EAP12348807.
Compatibility:
Compatible with select dryer models, including but not limited to:
Whirlpool: WED8500DC2, WED8500DC3, WED8500DC4, YWED8500DW0, YWED8500DW4
Maytag: MEDB835DW4, MEDB855DC4, MGDB835DW3, YMEDB855DW4
Kenmore: 110.68132410, 110.68132414, 110.69133410, 110.79133414
Amana: NED4655EW0
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, Amana, and other dryers.
🔧 Specifications: Genuine OEM Whirlpool felt drum seal, high-quality felt material.
💪 Reliable Performance: Prevents air leaks and lint buildup for efficient drying.
🛠️ Easy Installation: Requires adhesive and basic tools; typically installed in 30–60 minutes.
🛡️ Effective Fixes: Resolves excess lint buildup, dust accumulation, and longer drying times.
Product Specification
Part Number: W11189144
Component Type: Dryer felt drum seal
Material: High-quality felt
Additional Specs: Adhesive-backed for secure installation
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running efficiently today!
Add to cart now for a reliable fix!
Genuine Speed Queen RB170003 Dryer Drum Front Guide Kit - Compatible with Speed Queen, Alliance
Product Description
Ensure smooth and quiet operation of your dryer with the Genuine Speed Queen RB170003 Dryer Drum Front Guide Kit. This OEM glide kit is designed for Speed Queen and Alliance dryers manufactured in 1992 and later, supporting the drum at the front to allow smooth rotation and reduce friction. Made of durable materials, it addresses issues like squeaking, grinding noises, or drum misalignment, delivering reliable performance as an authentic Speed Queen part.
Note: Includes glide pads and sponge cushion. Disconnect power before installation. Wear work gloves to protect your hands. Refer to your parts diagram for a complete list of included parts.
Replaces part numbers: RB170003, AP5186012, 15558045
Compatibility:
Compatible with models including but not limited to:
Speed Queen: ADE3SRGS173TW01, ADE4BRGS175TW01, ADEE9BGS175TW01, ADG3SRGS113TW01, ADG4BRGS115TW01
Alliance: ATGE9AGP113TW01, ADGE9BGS115TW01
Other models: FEU17AWF1702, FGS17AWF, FGU17AWF1702, LES17AWF (verify compatibility)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Speed Queen and Alliance dryers manufactured in 1992 and later.
🔄 Specifications: OEM glide kit with glide pads and sponge cushion for smooth drum rotation.
💪 Reliable Performance: Authentic Speed Queen part ensures long-lasting durability.
🛠️ Easy Installation: Requires screwdriver, socket wrench, and work gloves; typically installed in 15–30 minutes.
🛡️ Effective Fixes: Resolves squeaking, grinding noises, or drum misalignment issues.
Product Specification
Part Number: Genuine Speed Queen RB170003
Component Type: Dryer drum front glide kit
Material: Plastic glide pads, sponge cushion
Mounting: Bolt-mounted to dryer drum front assembly
Operating Conditions: Suitable for household and commercial dryer environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your dryer running smoothly today!
Add to cart now for a reliable fix!
134196602CM Dryer Drive Motor
120V, 60Hz, 1/4 HP, main motor
Fits Specific Frigidaire dryer Models.
Replaces Part Numbers:134196602, 134196600, 134196601, AP6783327, PS12584805.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
