Search results for "washer transmission"

WP8181651 Washer Genuine OEM Door Striker Replaces Part Numbers: WP8181651, 8181651, 906446, AP6011711, PS11744910. Description: This Door Strike is a Genuine part for specific Maytag, Kenmore, Whirlpool washing machine models. This component is responsible for providing a secure and proper closure for the washer door, ensuring it seals tightly during operation.

Read more less

XPARTCO 3949247 Washer Lid Switch Replaces 3949247V The XPARTCO 3949247 is an aftermarket replacement lid switch assembly for Whirlpool top-load washers, and also fits select Roper, Estate, Kenmore, Inglis, Crosley, Amana, and KitchenAid models, including stacked washer/dryer laundry center units. This switch mounts to the underside of the cabinet top panel and tells the washing machine the lid is closed, allowing the wash cycle to begin. Black plastic with wire leads, sold individually. Over time, the plastic on the switch's actuator can become brittle with age and break when the lid is closed roughly, or from the movement of an unbalanced load causing parts of the washer to strike it. Symptoms of a failing lid switch include the wash cycle not starting even when the lid is closed, error codes related to the lid being open, inability to advance through cycle selections, or the washer not spinning while still agitating normally. It directly replaces 3949247V, 3949247, 3949237, 3949239, 3949240, 3949247VP, 4248251, TJ90ES247, AP3100003, ES247, AP5983746, AWP227261, EAP350434, OEM17951247, PD00024284, PS11722098. Quick Answer The XPARTCO 3949247 Washer Lid Switch fixes Whirlpool, Roper, Estate, Kenmore, Inglis, Crosley, Amana, and KitchenAid top-load washers (including laundry center combo units) that won't start with the lid closed, show lid-open error codes, won't advance through cycle selections, or agitate but won't spin. Black plastic, wire leads, sold individually. Replaces 3949247V, 3949247, 3949237, 3949239, 3949240, 3949247VP, 4248251, TJ90ES247, AP3100003, ES247, AP5983746, AWP227261, EAP350434, OEM17951247, PD00024284, PS11722098. Not the same as our 3949238 listing — these are separate, similarly-numbered switches used on different models. Common Problems This Part Fixes Wash cycle won't start even when the lid is closed Error codes related to the lid being open Inability to advance through cycle selections Washer agitates but won't spin Flashes or other improper lid switch behavior Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer lid switch directly replaces the following OEM and cross-reference part numbers: 3949247V, 3949247, 3949237, 3949239, 3949240, 3949247VP, 4248251, TJ90ES247, AP3100003, ES247, AP5983746, AWP227261, EAP350434, OEM17951247, PD00024284, PS11722098 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This lid switch is compatible with select Whirlpool top-load washers, and also fits select Roper, Estate, Kenmore, Inglis, Crosley, Amana, and KitchenAid washers built on the Whirlpool platform, including stacked washer/dryer laundry center units, and model numbers such as 11010202000, 11010202001, 11010502990, 11010502991, 11010852990, 11010852991, 11012202100, 11012502100, 11012852100, 11013202200, 11013212200, 11014102300, 11014112300, 11014202300, 11014212200, 11018202790, 11018522790, 11018522791, 11018532790, 11018542890, 11018542891, 11018609890, 11018702790, 11018702791, 11019101990, 11019101991, 11019101992, 11019202200, and 11020112000. Note — not the same as 3949238: Our 3949238 listing is a separate, similarly-numbered lid switch used on different models. Whirlpool also uses several other distinct lid switch designs, including the direct-drive style (8318084) and the thin-twin style (3355806), which are not interchangeable with this switch. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which switch your washer needs. Key Features Aftermarket replacement lid switch assembly — confirms the lid is closed before allowing the wash cycle to begin Resolves "won't start," "lid-open error codes," "can't advance cycle selections," and "agitates but won't spin" symptoms Black plastic construction with wire leads Mounts to the underside of the cabinet top panel Direct drop-in replacement matching the original mounting and connection Replaces 3949247V, 3949247, 3949237, 3949239, 3949240, 3949247VP, 4248251, TJ90ES247, AP3100003, ES247, AP5983746, AWP227261, EAP350434, OEM17951247, PD00024284, PS11722098 Compatible with Whirlpool, Roper, Estate, Kenmore, Inglis, Crosley, Amana, and KitchenAid washers, including laundry center units Aftermarket replacement built to OEM-equivalent quality standards Sold individually Product Specifications Part Number 3949247 OEM Part Number 3949247V Part Type Washer Lid Switch Assembly Condition Aftermarket Replacement Material plastic Wiring Wire leads Mounting Location Underside of cabinet top panel Function Confirms lid is closed before allowing the wash cycle to begin Repair Difficulty Easy — basic hand tools Quantity 1 lid switch (sold individually) Compatible Brands Whirlpool, Roper, Estate, Kenmore, Inglis, Crosley, Amana, KitchenAid Installation Notes ⚠️ Unplug Washer And Shut Off Water Supply Before Starting Unplug your washer from the wall outlet and turn off the water supply before beginning. Wear work gloves. Remove the screws holding the access panel in place at the back of the machine, then carefully remove the panel and set it aside. Locate the lid switch assembly near the top, center of the washer's interior. Use a Phillips and flathead screwdriver to unscrew the three screws that hold the lid switch assembly in place. Disconnect the wire harness from the old lid switch and carefully remove it from the machine. Install the new 3949247 into the machine in the exact same manner the old switch was removed. Connect the wire harness to the new switch. Reattach the three screws to secure the switch in place. Replace the access panel and reattach its screws. Turn on the water supply and plug in the washer. Run a test cycle with the lid closed to confirm the washer starts and spins normally. Tools needed: Phillips head screwdriver, flat head screwdriver. Frequently Asked Questions My washer agitates but won't spin. Is this the part I need? Yes, this is a well-documented symptom of a failed lid switch. This switch tells the washer's control system that the lid is closed before allowing certain functions, and spin specifically often requires this signal — a failed switch commonly leaves agitation working while blocking spin. Why does this switch fail over time? The plastic on the switch's actuator can become brittle with age and break when the lid is closed roughly. It can also break from the movement of an unbalanced load causing parts of the washer to strike it during a cycle. Is this the same as the 3949238 switch? No, these are separate lid switch part numbers, despite the similar numbering. Our 3949238 listing is used on different models. Always confirm your exact part number from your washer's parts diagram or the sticker on your old switch before ordering. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the material, wiring, and switching function of the original 3949247V lid switch assembly used in compatible Whirlpool, Roper, Estate, Kenmore, Inglis, Crosley, Amana, and KitchenAid washers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

DC62-00311F Washer Genuine OEM Water Valve – Compatible with Samsung & Kenmore Washers Product Description Restore proper water flow and dependable washer operation with the DC62-00311F Washer Genuine OEM Water Valve. This factory-approved inlet valve precisely controls water entering the washer during fill cycles. A defective valve may cause no-fill issues, slow filling, water leaks, or error codes. Installing this Genuine OEM water valve ensures exact fit, correct water pressure, and long-lasting performance as designed by the manufacturer. Replaces Part Numbers DC62-00311F, PD00043649, EAP11719654, AP5966624, 3992244, PS11719654. Compatibility This Genuine OEM washer water inlet valve fits select Samsung and Kenmore (Samsung-manufactured) washers. Example compatible models include (but are not limited to):Samsung WF203ANS, WF206ANS, WF209ANSKenmore 592.49003, 592.49005 Always verify your washer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🧩 Genuine OEM Replacement – Factory-certified for exact fit and performance 💧 Accurate Water Control – Ensures proper fill levels during wash cycles 🔧 Durable Solenoid Construction – Designed for reliable long-term use 🛠️ Direct-Fit Installation – No modifications required 🛡️ Fixes Common Issues – Resolves no-fill, slow fill, leaking, or error codes 📐 Product Specification Part Number: DC62-00311F Component Type: Washer Water Inlet Valve Voltage: 120V AC Water Connections: Hot & Cold Material: OEM-grade reinforced plastic with metal solenoids Mounting: Rear cabinet direct-fit Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, pliers, towel or shallow pan ⚠️ Safety First: Unplug the washer and shut off the water supply before servicing. Steps: Disconnect power and turn off water supply. Remove the rear access panel. Disconnect inlet hoses and wiring harness from the old valve. Remove mounting screws and take out the old valve. Install the new DC62-00311F water valve and secure it. Reconnect hoses and wiring, restore water and power, and test for leaks. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Genuine OEM Replacement Part 🔄 30-Day Return Policy Restore proper washer filling with confidence — Add to Cart Now for a factory-quality repair!

Read more less

DC66-00777A Washer Genuine OEM Pulsator Cap – Compatible with Samsung Washers Product Description Keep your washer performing like new with the DC66-00777A Washer Genuine OEM Pulsator Cap. This factory-approved cap covers the central bolt on the pulsator (washplate), preventing water, detergent, and debris from entering the hub assembly. A missing or cracked cap can lead to corrosion, noise, or imbalance during spin cycles. Replacing it with this Genuine OEM part ensures a perfect fit, watertight seal, and long-lasting protection. Replaces Part Numbers DC66-00777A, PD00025125, EAP8753312, AP5788799, 3282678, PS8753312. Compatibility This Genuine OEM pulsator cap fits select Samsung top-load washers. Example compatible models include (but are not limited to): Samsung WA400PJHDWR/AA, WA422PRHDWR/AA, WA45H7000AW/A2, and WA50M7450AW/A4. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🧩 Genuine OEM Replacement – Factory-approved part ensures perfect fit and reliable performance 💧 Protective Design – Seals the washplate bolt area to prevent leaks and corrosion 🔇 Reduces Noise – Helps maintain balanced, quiet spin cycles 🛠️ Tool-Free Installation – Snaps securely into place in seconds 🛡️ Fixes Common Issues – Replaces missing, cracked, or leaking pulsator caps 📐 Product Specification Part Number: DC66-00777A Component Type: Washer Pulsator (Washplate) Cap Material: High-grade molded plastic Color: Silver or gray finish (varies by model) Mounting: Snap-fit installation over pulsator bolt Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: None ⚠️ Safety First: Always unplug the washer before performing any maintenance to prevent electrical shock. Steps: Open the washer lid and locate the pulsator (washplate) center. Remove any old or damaged cap remnants. Align the new DC66-00777A cap with the bolt opening. Press firmly until it clicks securely into place. Close the lid and test the washer. ⏱️ Time Required: Less than 5 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Genuine OEM Replacement Part 🔄 30-Day Return Policy Protect your washer from moisture and debris — Add to Cart Now for a perfect, factory-quality fit!

Read more less

DC62-00266G Washer Water Inlet Valve Cold Side Water Valve Fits specific Samsung washer models. Description: This Water Inlet Valve is a replacement part for specific Samsung washing machine models. It controls the flow of water into the washer during the fill cycles, ensuring the proper amount of water is delivered for each wash load. This valve opens and closes to allow water to enter the tub from the household water supply, making it a critical component for the washing machine's operation. Replaces Part Numbers:DC62-00266G, AP5966622, PS11719652   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

ERP 5304514775 Washer Drain Pump Replaces Part Number:5304514775,  5304509619, 5304505248, AP6329666, PS12365827.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WH13X25296 Washer Water Valve Replaces Part Numbers: WH13X26534, WH13X25296, WH13X25297, AP6891106, PS12726768. Description: The Water Inlet Valve Assembly is a replacement part for specific GE washing machine models. It is responsible for regulating the flow of water into the washing machine during designated cycles. The water inlet valve opens and closes to allow water to enter the tub at the correct times and pressures. It works in coordination with other components to fill and drain the tub as needed.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

8182415 Washer Genuine OEM Drain Pump Fits Specific Whirlpool, Maytag washer Models. Replaces Part Numbers: WP8182415, 8182415, OEM24047170, AP6011792, 1065543, PS11744991. Description: This Drain Pump is a Genuine OEM part for specific Whirlpool, Maytag, Kenmore washing machine models.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WH13X26534 Washer Genuine OEM Water Valve – Compatible with GE and Hotpoint Washers Product Description Maintain proper water flow with the WH13X26534 Washer Genuine OEM Water Valve. This factory-approved Water Inlet Valve Assembly is a Genuine OEM part for specific GE washing machine models. It is responsible for regulating the flow of water into the washing machine during designated cycles. The water inlet valve opens and closes to allow water to enter the tub at the correct times and pressures. It works in coordination with other components to fill and drain the tub as needed. Replaces Part Numbers WH13X26534, WH13X25296, WH13X25297, PD00051646, AP6891106, PS12726768. Compatibility This water valve is compatible with select GE and Hotpoint washers. Example compatible models include (but are not limited to): GE GTW465ASN1WW, GTW720BSN0WS, and Hotpoint HTW240ASK6WS. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 OEM Replacement – Genuine GE water valve for select washers 💧 Reliable Water Control – Accurately manages hot and cold water fill 💰 Cost-Effective Genuine Part – Factory-tested for long-lasting performance 🛠️ DIY Friendly – Simple installation with basic tools 🛡️ Fixes Common Issues – Resolves leaks, slow fill, or washer not filling at all 📐 Product Specification Part Number: WH13X26534 Component Type: Washer Water Valve Assembly Material: Reinforced plastic housing with metal solenoids Mounting: Direct-fit replacement Operating Conditions: Residential washer environments Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, adjustable wrench, pliers ⚠️ Safety First: Always unplug washer and shut off water supply before starting repairs. Steps: Disconnect power and water supply from the washer. Remove the top or rear access panel to locate the water valve. Detach water hoses and wiring harness from the old valve. Unscrew and remove the defective valve. Install the new WH13X26534 valve and reconnect hoses and wiring. Reassemble the washer panel, restore power, and run a test cycle. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Solve washer filling problems quickly — Add to Cart Now for a reliable, factory-approved fix!

Read more less

WH12X10527 Washer Genuine OEM Timer Replaces Part Numbers: WH12X10527, AP5645215, PS4704240. Description: This washer timer is a Genuine OEM part for select GE washing machine models. This timer controls the various cycles of the washing machine, including wash, rinse, and spin cycles. By regulating the duration and sequence of each cycle, the timer ensures that the washing machine operates smoothly and efficiently.

Read more less

WH13X26535 Genuine OEM GE Washer Water Valve The WH13X26535 is a genuine GE OEM water inlet valve assembly for GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café models. This valve controls the flow of hot and cold water into the tub during the fill portion of the cycle, ensuring each wash uses the correct amount of water at the right temperature blend. It's housed in durable gray plastic. Common failure causes include mineral or sediment buildup inside the valve body, a burned-out internal solenoid coil, and general wear over years of use — five years is a commonly cited service life before this valve starts to show problems. A failing valve produces a clear set of symptoms: the washer not filling properly, water continuing to fill or drip even when the washer is turned off, or leaking near the valve area. It directly replaces AP6892695, WH13X24386, 4931303, PS12726769, WH13X24392, WH13X26535-25PK, EAP12726769, and PD00052736. As a genuine OEM part, the WH13X26535 is manufactured by GE to factory specifications — guaranteed fit, materials, and performance. Quick Answer The WH13X26535 Genuine OEM GE Washer Water Valve fixes GE top-load washers that aren't filling properly, are overfilling, or have water slowly dripping into the tub even when the washer is off. Housed in gray plastic. Replaces AP6892695, WH13X24386, 4931303, PS12726769, WH13X24392, WH13X26535-25PK, EAP12726769, PD00052736. This replacement valve does not include a thermistor or gasket — if your old valve has a thermistor mounted in front of the solenoids, you'll need to transfer it (with its gasket) to the new valve. Also not the same as the similarly-numbered WH13X26534, which is a separate valve for other GE/Hotpoint models. Common Problems This Part Fixes Washer not filling with water properly Washer overfilling Water slowly dripping or leaking into the tub even when the washer is turned off Leaking near the valve connections No hot water reaching the tub, or no cold water reaching the tub Cycle stalling at the fill step and never advancing to wash Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer water inlet valve directly replaces the following OEM and cross-reference part numbers: WH13X26535, WH13X24386, WH13X24392, 4931303, 003C17, AGE26261, AP6892695, 4476388, 4931303, OEM20678094, EAP11729481, EAP12726769, K-78637-2, PD00052736, PS12726769. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This water valve is compatible with select GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café washers built on the GE platform, spanning model series GTW460, GTW465, GTW485, GTW490, GTW500, GTW525, GTW540, and VTW540, including specific model numbers such as 5TW4207ST0WS, 5TW4307SW0WS, ETW485ASW0WB, GTW460AMJ0WW, GTW460AMJ1WW, and GTW460AMJ2WW. Note — thermistor transfer required, and not the same as WH13X26534: This valve does not include a thermistor or the rubber gasket that seats it. If your original valve has a thermistor mounted in front of the solenoids, you must transfer that thermistor and its gasket onto this new valve during installation. Separately, this part is not the same as the similarly-numbered WH13X26534, a distinct valve used on other GE/Hotpoint models with its own cross-reference set (PS12726768, AP6891106). Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine GE OEM part — factory-specified solenoid design and housing Controls hot and cold water flow into the tub Resolves "won't fill properly," "overfilling," and "dripping into the tub when off" symptoms caused by valve failure Durable gray plastic housing Direct drop-in replacement — matches the original mounting and hose connections Replaces AP6892695, WH13X24386, 4931303, PS12726769, WH13X24392, WH13X26535-25PK, EAP12726769, and PD00052736 Compatible with GE, Hotpoint, Haier, Monogram, and Café top-load washers Genuine OEM replacement — guaranteed fit, materials, and performance Moderate DIY repair, typically 30 to 60 minutes Product Specifications Part Number WH13X26535 Part Type Washer Water Inlet Valve Condition Genuine OEM Application Top-Load Washers Housing Material Gray plastic Includes Thermistor/Gasket No — transfer from old valve if equipped Repair Difficulty Moderate — 30 to 60 minutes Quantity 1 valve Compatible Brands GE, Hotpoint, Haier, Monogram, Café Installation Notes ⚠️ Shut Off Water Supply And Unplug Washer Before Starting — Watch For The Thermistor O-Ring Disconnect power at the outlet or shut off the circuit breaker, and shut off both hot and cold water supply valves before beginning. Wear work gloves. Access is typically behind the front control panel or top of the cabinet, depending on your model. The valve assembly is usually held in place with a metal plate and two screws. Photograph the wiring and hose connections before disconnecting anything. If your old valve has a thermistor (temperature sensor) mounted in front of the solenoids, it fits into a small hole in the bracket and uses an O-ring seal that's known to degrade and leak over time — this new valve does not include one, so you'll need to carefully transfer the thermistor and its gasket from the old valve to the new one. Disconnect the electrical connector and outlet hoses from the old valve, remove its mounting screws, and pull it free. Transfer the thermistor and gasket to the new WH13X26535 if applicable, then install it in the same position, reconnect all outlet hoses to their original positions, reconnect the electrical connector, and secure the mounting screws. Reattach the hot and cold supply hoses, tightening securely. Restore the water supply and check every connection for leaks before restoring power. Run a full test cycle across a few different temperature settings to confirm each fill function works correctly with no leaking. Tools needed: Phillips screwdriver, pliers, work gloves. Frequently Asked Questions Does this valve come with the thermistor? No. This valve no longer comes with the rubber gasket or thermistor that some GE washers use, mounted directly in front of the solenoids. If your old unit has one, you'll need to remove it from the old valve, along with its gasket, and transfer it onto this new valve during installation. Water has been slowly leaking into my tub even when the washer is off. Is that this valve? Yes, this is a documented cause. One customer traced over a year of slow leaking directly to this valve's thermistor O-ring, which is known to degrade over time and let water seep through even when the washer isn't running. Replacing the valve (and transferring a good thermistor and gasket if your model uses one) resolves this type of slow leak. Is this the same as WH13X26534? No, these are two separate GE valve part numbers with different cross-reference sets, despite the similar numbering. Always confirm the exact part number from your washer's parts diagram or the sticker on your old valve rather than assuming based on a close number match. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original solenoid design, housing, and connection type of the water inlet valve originally installed in your washer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

DC97-18682D Washer Genuine Drain Hose Assembly – Compatible with Samsung Washers Product Description Maintain proper water drainage with the DC97-18682D Washer Genuine Drain Hose Assembly. This OEM replacement hose is designed to channel used water safely from your washer to the household drain system. A damaged or clogged drain hose can cause leaks, standing water, or drainage errors. Replacing it with this genuine part restores dependable washer performance and prevents messy water issues. Replaces Part Numbers DC97-18682D, DC97-18682B, DC97-18682C, DC97-18682E, PD00070138, EAP16556783, AP7018854, PS16556783. Compatibility This genuine drain hose assembly is compatible with select Samsung front-load washers. Example compatible models include (but are not limited to): Samsung WF42H5000AW, WF45K6500AW, WF56H9100AW. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Replacement – Designed specifically for Samsung washers 💧 Reliable Drainage – Ensures proper water flow and prevents backup or leaks 💰 Cost-Effective Solution – Avoids costly water damage and washer breakdowns 🛠️ Easy Installation – Flexible design for quick fit with standard tools 🛡️ Fixes Common Issues – Resolves leaks, clogs, or drain-related error codes 📐 Product Specification Part Number: DC97-18682D Component Type: Washer Drain Hose Assembly Material: Heavy-duty rubber and reinforced plastic fittings Mounting: Direct fit replacement with factory connections Operating Conditions: Standard residential washer use Compliance: Genuine Samsung OEM part 🛠️ Installation Notes Tools Needed: Pliers, screwdriver (if clamps are included) ⚠️ Safety First: Always disconnect power and water supply before beginning any washer repair. Steps: Turn off water supply and unplug washer. Locate drain hose at the back of the washer. Remove hose clamps securing the old drain hose. Detach old hose from washer and household drain. Connect new DC97-18682D drain hose to washer outlet. Secure with clamps and ensure a snug fit into the drain standpipe. Restore water, reconnect power, and test for leaks. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Prevent leaks and drainage problems — Add to Cart Now for a reliable, factory-approved repair!

Read more less