Search results for "dryer thermostat"

XPARTCO 3394652 Dryer Drum Belt The XPARTCO 3394652 is an aftermarket replacement drum belt for Whirlpool electric and gas dryers, and also fits select Kenmore, Maytag, KitchenAid, Roper, Estate, Admiral, Hardwick, Jenn-Air, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Caloric, and Ikea models. This belt circles the drum and attaches to the motor pulley and idler pulley, transmitting the motor's rotation to spin the drum and keep clothes tumbling evenly throughout the drying cycle. Measures approximately 79-1/8" long, 1/4" wide, flat with 4 ribs and 3 grooves. Over time, the belt wears down or snaps from constant friction and tension. If the dryer's motor is running but the drum won't turn, this belt has likely broken or worn through. Symptoms of a failing belt include the drum not spinning, the dryer failing to start, unusual or loud noise, no heat or insufficient heat, drying taking too long, a burning smell, or the touchpad not responding. It directly replaces AP2946614, 26000345675, 2823, 345675, 4319392, 790H4, 8066064, AH345337, B78448, EA345337, ER3394652, ER345675, LB278, P46-153, PS345337, and TJ90LP278. Quick Answer The XPARTCO 3394652 Dryer Drum Belt fixes Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Estate, Admiral, Hardwick, Jenn-Air, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Caloric, and Ikea electric and gas dryers where the drum isn't spinning, the dryer won't start, or you hear squealing or loud noise. 79-1/8" long, 1/4" wide, flat, 4 ribs, 3 grooves. Replaces AP2946614, 26000345675, 2823, 345675, 4319392, 790H4, 8066064, AH345337, B78448, EA345337, ER3394652, ER345675, LB278, P46-153, PS345337, TJ90LP278. If the motor runs but the drum won't turn, that's the classic sign of a broken or worn-through belt. Common Problems This Part Fixes Motor runs but the drum won't turn Dryer won't start at all Unusual or loud noise, including squealing No heat or insufficient heat Drying takes too long Burning smell during operation Touchpad not responding Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer drum belt directly replaces the following OEM and cross-reference part numbers: 3394652, 26000345675, 345675, 4319392, 790H4, 8066064, AH345337, B78448, EA345337, ER345675, LB278, P46-153, AP2946614, AWP39138, PD00004694, PS345337, TJ90LP278 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drum belt is compatible with select Whirlpool electric and gas dryers, and also fits select Kenmore, Maytag, KitchenAid, Roper, Estate, Admiral, Hardwick, Jenn-Air, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Caloric, and Ikea dryers built on the same platform, including model numbers such as: WET4024HW, WET4024EW, LDR3822PQ, LTE5243DQ, LTG5243DQ 3LTE5243BN0, 3LTE5243BW0, 8LDR3422YG0, 8LDR3822DZ0 BYCCD3421W0, BYCCD3421W1, BYCCD3421W2, BYCCD3421W3, BYCCD3921W0 LDR3422AN0, LDR3422AW0, LDR3822BN0, LDR3822BW0, LDR3822DQ1, LDR3822DQ2, LDR3822DZ1, LDR3822DZ2, LDR3822HQ0 LE4900XTG2, LE4900XTN2, LE4900XTW2, LE4930XTN2, LE4930XTW2 LER3422AN0, LER3422AW0, LER3622BN0, LER3622BW0, LER3622DQ1, LER3622DQ2, LER3622DZ1, LER3622DZ2, LER3622HQ0 LG4931XTW2, LGR3422AN0, LGR3422AW0, LGR3622BN0, LGR3622BW0, LGR3622DQ1, LGR3622DZ1 LTE5243BN0, LTE5243BN1, LTE5243BN2, LTE5243BW0, LTE5243BW1, LTE5243BW2, LTE5243DQ0, LTE5243DQ1, LTE5243DZ0, LTE5243DZ1 LTG5243BN0, LTG5243BN1, LTG5243BN2, LTG5243BW0, LTG5243BW1, LTG5243BW2, LTG5243DQ0, LTG5243DQ1, LTG5243DZ0, LTG5243DZ1 REC3422AL1, REC3422AW1, REC3622BL0, REC3622BW0 Note: Always verify your full model number before ordering, since Whirlpool uses several different belt lengths across its dryer lineup. Contact our support team with your model number if you're unsure. Key Features Aftermarket replacement drum belt — attaches to the motor pulley and idler pulley to spin the drum Resolves "motor runs but drum won't turn," "won't start," "loud noise," and "no heat" symptoms Flat design with 4 ribs and 3 grooves for secure grip and smooth rotation Approximately 79-1/8" long, 1/4" wide Direct drop-in replacement matching the original length and profile Replaces AP2946614, 26000345675, 2823, 345675, 4319392, 790H4, 8066064, AH345337, B78448, EA345337, ER3394652, ER345675, LB278, P46-153, PS345337, and TJ90LP278 Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Estate, Admiral, Hardwick, Jenn-Air, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Caloric, and Ikea electric and gas dryers Aftermarket replacement built to OEM-equivalent quality standards Typically a 15 to 30 minute DIY repair Product Specifications Part Number 3394652 OEM Part Number 3394652 Part Type Dryer Drum Belt Condition Aftermarket Replacement Length Approx. 79-1/8" Width 1/4" Profile Flat, 4 ribs, 3 grooves Function Transmits motor rotation to spin the drum Repair Difficulty Easy — 15 to 30 minutes Quantity 1 drum belt Compatible Brands Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Estate, Admiral, Hardwick, Jenn-Air, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Caloric, Ikea Installation Notes ⚠️ Unplug Dryer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Remove the top and front panels of the dryer to access the drum and belt path. Release tension from the idler pulley and remove the old belt. Wrap the new 3394652 belt around the drum, motor pulley, and idler pulley, making sure it seats correctly in the grooves along the entire path. Pull the belt tight and reapply tension through the idler pulley. Before closing everything up, rotate the drum by hand to confirm smooth movement without hesitation. Reassemble the front and top panels. Restore power and run a test cycle to confirm the drum tumbles smoothly with no unusual noise. Tools needed: multi-screwdriver, putty knife, work gloves. Frequently Asked Questions The motor is running but the drum won't turn. Is this the belt? Yes, this is the classic and most reliable sign of a broken drum belt. If you can hear the motor running normally but the drum itself stays still, there's a good chance the belt has snapped or worn through and is no longer connecting the motor's rotation to the drum. My dryer isn't heating. Could the belt really be involved? On some models, yes indirectly — a broken belt can affect a door switch or safety interlock that also gates the heating circuit, so a belt failure can occasionally present as a no-heat or insufficient-heat symptom in addition to the more obvious lack of tumbling. Is this a difficult repair? It's a moderate repair requiring basic hand tools and some dryer disassembly, typically taking 15 to 30 minutes. Removing the top and front panels to access the drum and belt path is the most involved part of the process. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the length, width, and rib pattern of the original 3394652 drum belt used in compatible Whirlpool, Kenmore, Maytag, and related electric and gas dryers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 341241 Dryer Drum Belt The XPARTCO 341241 is an aftermarket replacement dryer drum belt compatible with a wide range of Whirlpool-family dryers including Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Hardwick, Caloric, and Ikea. The drum belt wraps around the outside of the dryer drum, loops around the motor pulley and idler pulley, and drives the drum to rotate during every drying cycle. Without a functioning belt, the drum cannot spin and clothes will not tumble or dry. Made from high-strength rubber with reinforced ribs, this belt measures 92-1/4 inches long x 1/4 inch wide and features 4 ribs and 3 grooves. It is flat on one side and ribbed on the other, and is built to resist cracking, stretching, and wear under the high heat and repeated tension cycles of daily dryer use. It also replaces some 5-rib, 4-groove belts. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO 341241 Dryer Drum Belt fixes dryers where the drum is not spinning, clothes are not tumbling, or a thumping/squealing noise is coming from the dryer. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, and more. Measures 92-1/4" L x 1/4" W with 4 ribs and 3 grooves. Common Problems This Part Fixes Dryer drum not spinning — motor runs but drum stays still Clothes not tumbling during the drying cycle Thumping, squealing, or slapping noise during operation Dryer runs but produces no heat because drum is stationary Burning rubber smell coming from the dryer Visible broken or frayed belt pieces found inside the dryer cabinet Clothes taking too long to dry due to drum not rotating at correct speed Replaces Part Numbers This drum belt directly replaces the following OEM and cross-reference part numbers: 341241, 14210003, 2008, 26000341241, 26000349533, 31001026, 31531589, 3389628, 3392665, 3394651, 3399844, 341241VP, 345473, 349533, 529597, 53-0186, 53-1080, 53-1086, 53-1528, 53-1589, 53-2671, 53-2910, 660996, 660997, 661561, 693306, 694088, 694416, 694868, 695055, 697388, 8066065, 8206, 8210, 920H4, 920H5, 99906951, 99989673, 99989674, FSP341241, LB276, LB279, P46-037, P46-149, W10127457, W10131364, AH346995, AP32, EA346995, ER341241, AWP39161, PD00002263, EAP346995, 694088-NC, AP2946843, PS346995, TJ341241. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drum belt is compatible with select dryers from the following brands: Whirlpool dryers (gas and electric) Kenmore / Sears dryers (select models) Maytag dryers KitchenAid dryers Amana dryers Roper dryers Admiral dryers Jenn-Air dryers Estate dryers Magic Chef dryers Crosley dryers Inglis dryers Norge, Modern Maid, Hardwick, Caloric, and Ikea dryers Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Drives the dryer drum via the motor pulley and idler pulley for smooth, consistent tumbling every cycle 92-1/4" length x 1/4" width — 4-rib, 3-groove design; flat on one side, ribbed on the other Also replaces some 5-rib, 4-groove belts — wide cross-compatibility across Whirlpool-family models Made from high-strength rubber with reinforced ribs — resists cracking, stretching, and heat damage Direct replacement for OEM part numbers 341241 and 8066065 — no modification required Compatible with over a dozen major appliance brands built on the Whirlpool platform Aftermarket replacement built to OEM-equivalent quality standards DIY-friendly repair — installs in 30–45 minutes with basic hand tools Often replaced together with the idler pulley (691366) and drum rollers (349241T) for a complete drum drive repair Product Specifications Part Number 341241 Part Type Dryer Drum Drive Belt Condition Aftermarket Replacement Application Gas and Electric Dryers Length 92-1/4 inches Width 1/4 inch Ribs 4 ribs, 3 grooves Profile Flat on one side, ribbed on the other Material High-strength rubber with reinforced ribs Color Black Compatible Brands Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Hardwick, Caloric, Ikea Often Replaced With 691366 Idler Pulley, 349241T Drum Rollers Installation Notes ⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. Remove the lint screen, then unscrew the two Phillips screws inside the lint filter housing. Use a putty knife 2 inches from each front corner to release the top panel clips and lift the top panel. Remove the front panel to access the drum. Release belt tension at the idler pulley, lift the drum slightly, and slide the old belt off. Loop the new 341241 belt around the drum with the ribbed side facing down (toward the drum). Route the belt around the idler pulley and motor pulley — consult your model's service manual or a model-specific video for the correct belt path. Reassemble and run a test cycle. Tip: While the drum is out, inspect and replace the idler pulley (691366) and drum rollers (349241T) if worn. Tools needed: Phillips screwdriver, putty knife or flat pry tool. Frequently Asked Questions How does the 341241 differ from the W10205415 and 6602-001655 belts? All three are 92-inch dryer drum belts, but they differ in width and rib count. The 341241 is 1/4" wide with 4 ribs and 3 grooves. The W10205415 is 3/8" wide with 5 ribs and 4 grooves. The 6602-001655 is 5/16" wide with 5 ribs and 4 grooves designed for Samsung dryers. Always match the part number to your specific model — do not substitute based on appearance alone. Will this belt fit my Kenmore dryer? Many Kenmore dryers — especially the popular 110-series — are manufactured by Whirlpool and use the 341241 belt. Check your model number against the compatibility list and contact our support team if you need help confirming the fit before ordering. How do I know if my drum belt needs to be replaced? The most obvious sign is that the dryer motor hums but the drum does not spin. You may also notice a thumping or slapping sound during operation, a burning rubber smell, or clothes that are damp after a full cycle. Open the dryer cabinet to visually confirm if the belt is broken, frayed, or stretched. Should I also replace the idler pulley and drum rollers? Yes — since the dryer is already disassembled, it is highly recommended to inspect and replace the idler pulley (691366) and drum support rollers (349241T) at the same time. These parts wear at a similar rate and replacing all three together — often sold as a repair kit — prevents having to disassemble the dryer again in the near future. Is this an OEM or aftermarket part? This is an aftermarket replacement built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is made from high-strength rubber to match the dimensions and performance of the original 341241 belt. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

DA32-00029X Genuine OEM Samsung Refrigerator Temperature Sensor The DA32-00029X is a Genuine OEM Samsung replacement refrigerator temperature sensor compatible with select Samsung side-by-side and French door refrigerators, as well as related Kenmore Samsung-built models. This NTC (negative temperature coefficient) thermistor continuously monitors the temperature inside the refrigerator and sends resistance-based readings to the electronic control board, which uses this data to cycle the compressor, fans, and defrost heaters to maintain accurate, consistent temperatures throughout the appliance. As the thermistor heats up or cools down, its electrical resistance changes predictably, allowing the control board to calculate the exact temperature in real time. When this sensor fails — whether shorted, open, or providing drifted/inaccurate readings — the refrigerator may run too cold or too warm, cycle excessively, fail to maintain set temperatures, run continuously, ice up the evaporator, or display temperature-related fault codes. As a Genuine OEM part manufactured by Samsung to factory specifications, the DA32-00029X is rated approximately 13.2 kΩ at 20°C (68°F) when functioning correctly. It is one of the variants in the DA32-00029 sensor family — Samsung uses different production-run variants (M, N, Q, U, X) across model generations, all functionally similar but with different wire harness connectors. Installs in 20–30 minutes with basic hand tools. Quick Answer The DA32-00029X Genuine OEM Samsung Refrigerator Temperature Sensor fixes Samsung side-by-side and French door refrigerators that run too cold or warm, cycle excessively, freeze up the evaporator, fail to maintain set temperatures, or display temperature-related fault codes. Genuine OEM Samsung NTC thermistor — approximately 13.2 kΩ at 20°C (68°F). One of the DA32-00029 series variants (M, N, Q, U, X) — confirm your specific variant by connector style before ordering. Common Problems This Part Fixes Refrigerator running too cold or too warm — sensor not accurately reporting temperature to the control board Inconsistent temperatures — fluctuating cooling that can't maintain set point Excessive or frequent defrost cycles — control board misreading temperature Refrigerator running continuously without cycling off Heavy frost or ice buildup on the evaporator coils caused by erratic defrost timing Food spoilage from temperature instability Temperature-related error codes displayed on the control panel Multimeter test shows 0 ohms (shorted) or infinite resistance (open) instead of the expected ~13.2 kΩ at room temperature Replaces Part Numbers This temperature sensor directly replaces the following Samsung part number: DA32-00029X, EAP16732853, FIX16732853, ASM30292, AP7188139, OEM21564426, PD00090960, PS16732853. The DA32-00029X is part of the broader DA32-00029 sensor family — variants M, N, Q, U, and X are functionally similar Samsung temperature sensors used across different model generations, but with different wire harness connector configurations. They are not automatically interchangeable — match the variant suffix (or the connector style) to your refrigerator. Contact our support team with your model number if you need confirmation before ordering. Compatibility This temperature sensor is compatible with select Samsung side-by-side and French door refrigerators, including: Samsung side-by-side refrigerators (select models in the RS-series with the matching DA32-00029X connector) Samsung 3-door French door refrigerators in 17.5 cu. ft., 19.5 cu. ft., and related capacities (Black Stainless Steel, Black, White, and Stainless Look finishes) Samsung 4-door French door refrigerators (select RF-series models with the matching DA32-00029X connector) Kenmore / Sears refrigerators (select Samsung-built models) Important — Match the Variant to Your Refrigerator: Samsung uses several variants of the DA32-00029 temperature sensor (M, N, Q, U, X) across different model generations. The sensors are similar in function and resistance value, but the wire harness connectors differ — using the wrong variant means the connector won't fit. Before ordering, verify your refrigerator's parts diagram specifies DA32-00029X (not DA32-00029M, N, Q, or U), or visually confirm the connector on your old sensor matches the new one. Contact our support team with your model number if you're unsure. Key Features Genuine OEM part manufactured by Samsung to factory specifications — guaranteed fit and performance NTC (negative temperature coefficient) thermistor — resistance changes predictably with temperature, allowing precise temperature monitoring Sends real-time temperature data to the control board to regulate compressor cycling, fan operation, and defrost timing Approximately 13.2 kΩ of resistance at 20°C (68°F) when functioning correctly Wire harness with connector attached for direct plug-in installation (variant-specific connector — see compatibility note) One of the DA32-00029 series variants (M, N, Q, U, X) — match to your refrigerator's variant suffix Compatible with select Samsung side-by-side, 3-door French door, and 4-door French door refrigerators, plus Kenmore Samsung-built models Installs in 20–30 minutes with basic hand tools Product Specifications Part Number DA32-00029X Part Type Refrigerator Temperature Sensor (NTC Thermistor) Condition Genuine OEM Application Side-by-Side and French Door Refrigerators (Samsung platform) Sensor Type NTC (Negative Temperature Coefficient) Resistance at 20°C Approximately 13.2 kΩ (68°F) Variant Family DA32-00029 (M, N, Q, U, X variants) Compatible Brands Samsung, Kenmore (Samsung-built) Installation Notes ⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. Samsung refrigerators typically have multiple temperature sensors — fresh food compartment, freezer compartment, and evaporator/defrost sensors — confirm which sensor location matches your symptom and parts diagram before starting. The fresh food and freezer sensors are typically clipped to a wall or shelf bracket inside each compartment, while evaporator/defrost sensors are mounted near the evaporator coils behind a rear access panel. Take a photo of the sensor mounting and wire routing before removing. Disconnect the sensor's wire connector (gently — the molex connectors can be fragile) and release the sensor from its mounting clip. Inspect the connector for corrosion or heat discoloration on the wires — discoloration indicates prior overheating in that area. Install the new DA32-00029X sensor in the same position, reseat the connector firmly, and secure the mounting clip. Restore power, allow several hours for the refrigerator to return to its set temperature, and confirm stable temperature operation before reloading with food. Tools needed: Phillips screwdriver, multimeter (for testing), work gloves. Frequently Asked Questions How do I know if the temperature sensor has failed? Unplug the refrigerator, disconnect the sensor's connector, and set your multimeter to resistance mode. At room temperature (around 20°C/68°F), a working NTC thermistor should read approximately 13.2 kΩ. If the sensor reads 0 ohms, it has shorted internally. If it reads infinite resistance (open circuit, often shown as "OL" on the multimeter), the sensor has failed open. Either reading confirms the sensor needs replacement. If the sensor reads close to 13.2 kΩ at room temperature but the refrigerator still has temperature problems, the control board or another sensor in the system may be the actual cause. My Samsung refrigerator has multiple temperature sensors — which one do I replace? Samsung refrigerators typically use multiple temperature sensors: one in the fresh food compartment, one in the freezer compartment, and one near the evaporator coils (often called the defrost sensor). The DA32-00029X is used as the fresh food or freezer compartment temperature sensor on select Samsung models. Confirm the exact mounting location for your specific symptom (e.g., fresh food too warm vs. freezer too cold) and your refrigerator's parts diagram before ordering. The evaporator/defrost sensor is typically a different part number, so don't assume the DA32-00029X covers all sensor positions. What is the difference between DA32-00029X and DA32-00029M, N, Q, or U? These are all variants of the same Samsung refrigerator temperature sensor family. They share the same NTC thermistor design and resistance characteristics (approximately 13.2 kΩ at 20°C), but use different wire harness connector configurations to match different refrigerator generations and wiring designs. The X variant is used on select Samsung side-by-side and French door models, while M, N, Q, and U variants appear on other model groups. They are not automatically interchangeable — match the variant to your refrigerator's exact part diagram, or visually compare connector styles before ordering. My Samsung fridge is icing up the back wall — could this be the sensor? Possibly, yes. If the temperature sensor near the evaporator (the defrost sensor) is misreporting temperature, the control board may not trigger the defrost cycle when needed, allowing ice to build up on the evaporator coils. Eventually this ice migrates to the rear interior wall as a frozen sheet. If your symptom is back-wall icing combined with poor cooling, the evaporator sensor is a likely cause — but confirm whether the DA32-00029X is the evaporator sensor on your specific model, or whether your model uses a different part number for that position. Always verify against your model's parts diagram. Is this a Genuine OEM or aftermarket part? This is a Genuine OEM part manufactured by Samsung to factory specifications. It is the exact same temperature sensor installed in compatible Samsung side-by-side and French door refrigerators (and Kenmore Samsung-built models) from the factory — guaranteed fit, materials, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO DC61-01215B Dryer Idler Tension Spring – Compatible with Samsung & Kenmore Dryers Product Description Restore proper belt tension and smooth drum rotation with the XPARTCO DC61-01215B Dryer Idler Tension Spring. This high-quality replacement spring maintains correct tension on the idler pulley, ensuring the dryer belt stays tight during operation. A worn or broken tension spring can cause belt slippage, squealing noises, drum not turning, or dryer stopping mid-cycle. Replacing it with this durable XPARTCO spring helps maintain reliable dryer performance. Replaces Part Numbers DC61-01215B, 2069087, DC61-01215A, DE1215B, PD00027514, EAP4206154, AP4211487, PS4206154. Compatibility This replacement idler tension spring fits select Samsung and Kenmore (Samsung-manufactured) dryers. Example compatible models include (but are not limited to):Samsung DV42H5000EW, DV45H7000EWKenmore 592-89045, 592-89047 Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM tension and fit specifications 🔧 Maintains Proper Belt Tension – Keeps dryer belt tight and aligned 🔇 Reduces Noise & Slippage – Prevents squealing and belt skipping 💪 Durable Spring Steel Construction – Built for long-lasting elasticity 🛡️ Fixes Common Issues – Solves drum not turning, belt slipping, or abnormal noises 📐 Product Specification Part Number: DC61-01215B Component Type: Dryer Idler / Belt Tension Spring Material: High-tensile spring steel Application: Idler pulley tension control Mounting: Hooks between idler arm and cabinet Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, needle-nose pliers ⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock. Steps: Disconnect power and open the dryer cabinet. Locate the idler pulley and tension spring. Remove the worn or broken spring. Install the new XPARTCO DC61-01215B spring in the same mounting points. Reassemble dryer panels and restore power. Run a test cycle to confirm proper belt tension. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore proper belt tension and smooth dryer operation — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

ADQ56656401 Genuine OEM LG Dryer Lint Screen The ADQ56656401 is a genuine LG OEM lint filter screen for LG and select Kenmore Elite front-load dryers. This is the removable screen that sits in the lint trap opening at the top of the dryer, catching lint and fabric fibers out of the exhaust airflow before they can reach the vent duct. Keeping this screen intact and free of buildup is one of the most important things you can do for your dryer's performance — a torn, missing, or heavily clogged screen doesn't just slow drying, it lets more lint travel downstream into the ducting, which is a well-documented fire risk factor for dryers generally. Built with an ABS plastic frame and a stainless steel mesh screen, this filter measures approximately 11.9" x 10.9". Over time the mesh can tear, the frame can crack, or the screen can simply wear out and stop trapping lint as effectively as it should. A worn or damaged lint screen typically shows up as drying times that have crept longer than they used to, visible lint on clean clothes, or a screen that's visibly torn, bent, or missing sections of mesh. It directly replaces AP4457244, 1462822, AH3531962, EA3531962, and PS3531962. Quick Answer The ADQ56656401 Genuine OEM LG Dryer Lint Screen fixes LG and select Kenmore Elite front-load dryers with a torn, cracked, missing, or heavily worn lint filter, showing up as longer drying times or lint on clean clothes. ABS frame with stainless steel mesh, approximately 11.9" x 10.9". Replaces AP4457244, 1462822, AH3531962, EA3531962, PS3531962. Not the same filter as ADQ56656403, which is a slightly smaller (11.2" x 10.9") screen used on LG WashTower models. Common Problems This Part Fixes Drying times that have gradually gotten longer than they used to Lint visible on clean clothes after a cycle Lint screen visibly torn, cracked, or missing sections of mesh Screen frame that's cracked, warped, or won't seat properly in the trap opening Reduced airflow through the dryer overall Lint screen that has gone missing and needs straightforward replacement Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer lint screen directly replaces the following OEM and cross-reference part numbers: ADQ56656401, AP4457244, EAP3531962, PS3531962, ALG52875, PD00001720, AH3531962, EA3531962 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This lint screen is compatible with select LG front-load dryers, and also fits select Kenmore Elite dryers built on the LG platform, including model numbers such as: DLE3170W, DLE3400W, DLE3500W, DLE3600V, DLE3050W DLEX3360V, DLEX3370V, DLEX3370W, DLEX3370R, DLEX3470V, DLEX3470W, DLEX3570V, DLEX3570W, DLEX3700V, DLEX3700W, DLEX3900W, DLEX4370K, DLEX3001R DLG3171W, DLG3401W, DLGX3361R, DLGX3361V, DLGX3361W, DLGX3371V, DLGX3371W, DLGX3471W, DLGX4271W, DLGX3002R DLE2601R, DLE2601W, DLE2701V, DLEX2801L, DLEX2801R, DLEX2801W, DLEX2901V, DLEX3001W, DLEX3001P, DLEX3875V, DLEX3875W DLG2602R, DLG2602W, DLG2702V, DLGX2802L, DLGX2902V, DLGX3002P, DLGX3002W, DLGX3876V Kenmore Elite RN1308AS, RN1308BS, RN1308CS, RN1310A, RN1310AS, RN1310B, RN1310BS, RN1310DS, RN1319E, RN1319VS, RN1321VS, RV1308AS, RV1308BS, RV1308CS, RV1310A, RV1310AS, RV1310B, RV1310BS, RV1310DS, RV1319E, RV1319VS, RV1321AS, RV1321VS Note — not the same as ADQ56656403: This lint screen is approximately 11.9" x 10.9". A similarly-numbered part, ADQ56656403, is a slightly smaller 11.2" x 10.9" screen used on LG WashTower models such as DLEX4000W, DLGX4001W, DLGX4201B, and DLGX4201W. The two are not interchangeable. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which lint screen fits your dryer. Key Features Genuine LG OEM part — factory-specified frame dimensions and mesh density ABS plastic frame with a stainless steel mesh screen for durability Resolves "longer drying times," "lint on clean clothes," and "torn or missing screen" symptoms Traps lint and fabric fibers before they reach the exhaust ducting Approximately 11.9" x 10.9" Direct drop-in replacement — lifts out and in with no tools required Replaces AP4457244, 1462822, AH3531962, EA3531962, and PS3531962 Compatible with LG and select Kenmore Elite front-load dryers Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number ADQ56656401 Part Type Dryer Lint Screen / Filter Condition Genuine OEM Brand LG Frame Material ABS plastic Screen Material Stainless steel mesh Dimensions Approx. 11.9" x 10.9" Location Lint trap opening, top of dryer Repair Difficulty Very Easy — no tools required Quantity 1 lint screen Compatible Brands LG, Kenmore Elite Installation Notes This is a simple, tool-free repair. With the dryer unplugged or off, locate the lint trap opening at the top of the dryer and pull the old lint screen straight up and out. Line up the new ADQ56656401 screen with the same opening and slide it back down into place until it seats fully and sits flush. There's no need to disconnect power for this repair, but it's good practice to do so if you're also cleaning out the trap housing itself. While the screen is out, take a moment to wipe down the inside of the lint trap housing to clear any accumulated lint before reinserting the new screen. Tools needed: none. Frequently Asked Questions My drying times have gotten longer. Is a worn lint screen really the cause? It's one of the most common and easiest-to-fix causes. A torn or heavily worn screen lets lint pass through into the ducting instead of being caught, which restricts airflow further downstream and makes the dryer work harder to move air. Combined with regularly cleaning the screen after every load, a fresh screen in good condition helps restore normal drying times. Is it actually important to replace a torn lint screen, or is it just cosmetic? It's worth replacing rather than continuing to use a damaged screen. A torn or heavily worn lint filter lets more lint travel past it into the dryer's internal ducting and exhaust path, and lint buildup in that ducting is a well-documented dryer fire risk factor. Combined with never running the dryer without a lint filter in place at all, keeping the screen in good condition is a simple, inexpensive way to reduce that risk. Do I need any tools to replace this? No. The lint screen simply lifts straight out of its slot and the new one slides straight back in — no tools, no disassembly required. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original frame dimensions, mesh material, and fit of the lint screen originally installed in your LG or Kenmore Elite dryer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO DA32-00006S Refrigerator Temperature Sensor – Compatible with Samsung Refrigerators Product Description Restore accurate temperature monitoring and consistent cooling with the XPARTCO DA32-00006S Refrigerator Temperature Sensor. This high-quality aftermarket replacement (also known as a thermistor) measures internal refrigerator or freezer temperatures and sends precise feedback to the control board. A failed or inaccurate sensor can cause temperature fluctuations, over-freezing, warm compartments, or error codes. Replacing it with this reliable XPARTCO sensor helps maintain stable temperatures and proper refrigerator operation. fits select Samsung Refrigerator models XPARTCO provides cost-effective aftermarket appliance parts engineered to match original fit and performance. Replaces Part Numbers DA32-00006S, PD00002153, EAP4138590, AP4308802, PS4138590. Compatibility This replacement refrigerator temperature sensor fits select Samsung refrigerators. Commonly used in fresh food or freezer compartments depending on model. Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM resistance and response specifications 🌡️ Accurate Temperature Sensing – Helps maintain consistent cooling ❄️ Fixes Cooling Issues – Resolves temperature swings and sensor-related errors 🧩 Direct-Fit Design – Installs easily without modification 💰 Cost-Effective Repair – Reliable alternative to OEM temperature sensors 📐 Product Specification Part Number: DA32-00006S Component Type: Refrigerator Temperature Sensor (Thermistor) Function: Measures and reports internal temperature Application: Refrigerator or freezer compartment (model dependent) Connector Type: Plug-in wire harness Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver ⚠️ Safety First: Unplug the refrigerator before servicing to avoid electrical shock. Basic Steps: Disconnect refrigerator power. Access the sensor location inside the compartment or behind the panel. Disconnect the old temperature sensor from the wiring harness. Remove the old sensor and install the new XPARTCO DA32-00006S sensor. Reconnect wiring, reassemble panels, and restore power. Allow several hours for temperatures to stabilize. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Aftermarket Appliance Parts 🔄 30-Day Return Policy Restore accurate temperature control and reliable cooling — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

WPW10411934 Range Genuine OEM Surface Element Switch – Compatible with Whirlpool, Maytag & KitchenAid Ranges Product Description Restore precise burner temperature control with the WPW10411934 Range Genuine OEM Surface Element Switch. This Genuine OEM switch is engineered by the original manufacturer to control the heat output of electric surface elements. A faulty surface element switch can cause burners to stay on high, not heat at all, or cycle inconsistently. Replacing it with this authentic OEM part ensures proper electrical performance, safe operation, and factory-level reliability. This part is a Genuine OEM component, manufactured to exact specifications for fit, durability, and long-term performance. Replaces Part Numbers WPW10411934, W10411934, 4446483, PD00033778, EAP11754410, AP6021089, PS11754410. Compatibility This Genuine OEM surface element switch fits select Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore (Whirlpool-manufactured) electric ranges. Common compatible models include (but are not limited to): Whirlpool WFE515S0ES Maytag MER8800FZ KitchenAid KERA205PB Always verify your range’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🏭 Genuine OEM Part – Manufactured to original factory specifications 🔥 Accurate Heat Regulation – Restores proper burner temperature control ⚡ Safe Electrical Operation – Designed for correct voltage and load handling 🎛️ Smooth Adjustment – Ensures responsive burner control 🔧 Exact Fit & Direct Replacement – No modifications required 📐 Product Specification Part Number: WPW10411934 Component Type: Surface Element Control Switch Voltage: 240V Application: Electric range surface burner control Mounting: Shaft-mounted behind control panel OEM Status: Genuine OEM 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Disconnect power at the breaker before servicing the range to avoid electrical shock. Basic Steps: Turn off power to the range at the breaker. Remove the control knob and access the control panel. Label and disconnect wires from the old switch. Remove mounting screws and remove the old switch. Install the new WPW10411934 Genuine OEM switch. Reconnect wiring, reassemble the control panel, and restore power. Test burner operation. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🏭 Genuine OEM Appliance Part 🚚 Free Shipping on All Orders 🔄 30-Day Return Policy Restore factory-level burner control and safe cooking performance — Add to Cart Now with confidence!

Read more less

W11189144 Genuine OEM Dryer Felt Drum Seal - Compatible with Whirlpool, Maytag, Kenmore Product Description Maintain your dryer’s efficiency with the W11189144 Genuine OEM Dryer Felt Drum Seal. This Whirlpool-manufactured felt seal is designed as a replacement for select Whirlpool, Maytag, Kenmore, and other compatible dryers. It wraps around the drum, creating a protective barrier between the drum and the cabinet to prevent air leaks, lint buildup, and debris accumulation. This part addresses issues like excess lint near the door, dust inside the dryer, or longer drying times due to reduced airflow efficiency, often caused by wear from regular use or high-heat conditions. Note: Includes (1) felt drum seal. Disconnect power before installation. Verify compatibility with your dryer model. Replaces part numbers: W11189144, W10664120, 4547089, AP6286713, PS12348807, PD00049832, EAP12348807. Compatibility: Compatible with select dryer models, including but not limited to: Whirlpool: WED8500DC2, WED8500DC3, WED8500DC4, YWED8500DW0, YWED8500DW4 Maytag: MEDB835DW4, MEDB855DC4, MGDB835DW3, YMEDB855DW4 Kenmore: 110.68132410, 110.68132414, 110.69133410, 110.79133414 Amana: NED4655EW0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, Amana, and other dryers. 🔧 Specifications: Genuine OEM Whirlpool felt drum seal, high-quality felt material. 💪 Reliable Performance: Prevents air leaks and lint buildup for efficient drying. 🛠️ Easy Installation: Requires adhesive and basic tools; typically installed in 30–60 minutes. 🛡️ Effective Fixes: Resolves excess lint buildup, dust accumulation, and longer drying times. Product Specification Part Number: W11189144 Component Type: Dryer felt drum seal Material: High-quality felt Additional Specs: Adhesive-backed for secure installation Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running efficiently today! Add to cart now for a reliable fix!

Read more less

ERP 134715900 Dryer Drum Roller with Axle Replaces Part Numbers: 134715900, 5304523155, AP6979841, 7134715900, AP6977189, PS12746506. Description: The Roller Assembly is a replacement part specific to Electrolux, Frigidaire clothes dryer models. It contains multiple smooth-rolling cylinders that guide the dryer drum assembly as it turns.    This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO Y312959 Dryer Drum Belt Replaces WPY312959 The XPARTCO Y312959 is an aftermarket replacement dryer drum drive belt compatible with a wide range of Maytag, Jenn-Air, Whirlpool, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers — including the long-running vintage Maytag DE and DG halo-of-heat series. The drum belt is a critical component that connects the drive motor to the drum. It wraps all the way around the drum's circumference, passes around a spring-loaded idler (tension) pulley, and connects to the drive motor pulley. When the motor runs, it drives the belt, which rotates the drum to tumble clothes for even drying. Over time, drive belts fail from normal wear, cracking or fraying from age and repeated flexing, exposure to heat and lint buildup, stretching that causes slipping, or sudden breakage. Constructed from durable black rubber. Dimensions: 100" long x 3/8" (5/16") wide, with 5 ribs and 4 grooves. Includes instructions. It directly replaces Y312959, WPY312959, WPY312959VP, 312959, 3-12959, 3-14774, 314774, 1000H5, 8195-959, LB234, P46-150, P46-151, 1246110, 6-3129590, AP6024192, EAP11757542, PD00028571, and PS11757542. Important: install the belt with the grooved side against the motor pulley and the smooth side against the drum. Because the belt is symmetrical, it can be installed with either end facing out. Often replaced together with the idler pulley (WP6-3037050) and drum support roller kit (12001541 / 303373K), sold separately. Installs in 30–60 minutes with basic hand tools. Quick Answer The XPARTCO Y312959 Dryer Drum Belt fixes Maytag, Jenn-Air, Whirlpool, Amana, and Kenmore dryers where the drum won't turn (motor runs but drum stays still), the drum spins slowly, or the dryer makes loud squealing/thumping noises. 100"L x 3/8"W. 5 ribs, 4 grooves. Black rubber. Replaces WPY312959, WPY312959VP, 312959, 3-12959, 3-14774, 314774, 1000H5, 8195-959, LB234, P46-150, P46-151, 1246110, 6-3129590, AP6024192, EAP11757542, PS11757542. Install grooved side against the motor pulley, smooth side against the drum. Often paired with idler pulley WP6-3037050 and drum roller kit 12001541. Common Problems This Part Fixes Dryer drum doesn't turn — motor runs but drum stays still (belt snapped) Dryer drum rotates slowly or intermittently — belt worn or slipping Loud squealing, squeaking, or thumping noises during operation — belt cracked, glazed, or misaligned Clothes taking much longer than normal to dry — drum not tumbling clothes effectively Visible cracks, fraying, or glazing on the belt surface Belt broken completely — often heard as a loud snap during operation Drum spins freely by hand with no resistance — a clear sign the belt has snapped Belt worn thin or stretched after decades of use on a vintage Maytag dryer Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer drum belt directly replaces the following OEM and cross-reference part numbers: Y312959, WPY312959, 1000H5, 1246110, 3-12959, 3-14774, 312959, 314774, 8195-959, P46-150, P46-151, 6 3129590, AP6024192, AWP51437, EAP11757542, PD00028571, PS11757542 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This dryer drum belt is compatible with select dryers from the following brands: Maytag electric dryers — DE106, DE107, DE110, DE180, DE18CA/CM/CS/CT, DE19CA/CD/CS/CT, DE210, DE212, DE21CA/CM/CS/CT, DE22CA/CS/CT, DE23CD, DE24CA/CM/CS/CT, DE25CS, DE26CA/CD/CS/CT, DE27CA/CS/CT, DE303, DE308, DE309, DE312, DE313, DE382, DE4000, DE408-DE9900 series and many more Maytag gas dryers — DG106, DG107, DG110, DG18CA/CM/CS/CT, DG19CA/CD/CS/CT, DG210, DG212, DG21CA/CM/CS/CT, DG22CA/CS and related DG-series models Maytag dryers — LDE and LDG series (LDE7304ACE, LDE8406ACE/ACM/ADE, LDE8410, LDG8424AAE, LDG9304AAM and related) Jenn-Air dryers (select models) Whirlpool dryers (select Whirlpool-built models) Amana, Magic Chef, Admiral, Norge, Roper dryers (select Whirlpool/Maytag-built models) Kenmore / Sears dryers (select Whirlpool/Maytag-built models) Note: When you replace the drum belt, this is also the ideal time to inspect the idler (tension) pulley (WP6-3037050) and the drum support rollers (kit 12001541 / 303373K) — they wear from the same friction cycles as the belt, and if they're rough, seized, or noisy, the new belt will wear out prematurely. Before replacing the belt due to noise, check the drum support rollers and idler pulley and replace if you see signs of wear. Always verify your dryer model number before ordering. Key Features Dryer drum drive belt — connects the motor pulley to the drum to enable tumbling during drying cycles Resolves "drum won't turn," "loud squealing noise," and "long dry times" symptoms when caused by belt failure Durable black rubber construction — engineered to withstand thousands of hours of high-temperature, high-friction operation Dimensions: 100" long x 3/8" (5/16") wide with 5 ribs and 4 grooves Install with the grooved side against the motor pulley and the smooth side against the drum Symmetrical design — can be installed with either end facing out Includes instructions Replaces WPY312959, WPY312959VP, 312959, 3-12959, 3-14774, 314774, 1000H5, 8195-959, LB234, P46-150, P46-151, 1246110, 6-3129590, AP6024192, EAP11757542, and PS11757542 Compatible with vintage Maytag DE/DG series, LDE/LDG series, plus Jenn-Air, Whirlpool, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers Often replaced together with the idler pulley (WP6-3037050) and drum support roller kit (12001541 / 303373K), sold separately Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 30–60 minutes with basic hand tools Product Specifications Part Number Y312959 OEM Part Number WPY312959 Part Type Dryer Drum Drive Belt Condition Aftermarket Replacement Application Dryers (Maytag / Whirlpool platform) Length 100" Width 3/8" (5/16") Ribs / Grooves 5 ribs / 4 grooves Color Black Material Rubber Installation Orientation Grooved side against motor pulley, smooth side against drum Often Paired With Idler Pulley (WP6-3037050), Drum Roller Kit (12001541 / 303373K) Compatible Brands Maytag, Jenn-Air, Whirlpool, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore Installation Notes ⚠️ Unplug Dryer Before Starting — Wear Work Gloves — Grooved Side Against Motor Pulley Disconnect power at the breaker or outlet before beginning. Wear work gloves to protect your hands from sharp sheet metal edges inside the dryer cabinet. Access the drum by removing the appropriate panels — the specific procedure varies by model, but on many vintage Maytag dryers this involves removing the front or top panel. Photograph the belt routing before disassembly if any belt fragments remain. Remove any pieces of the old broken belt from around the drum, motor pulley, and idler pulley, and vacuum out accumulated lint and belt dust. Clean any belt dust off the drum. Route the new Y312959 belt around the drum. Install with the grooved (ribbed) side against the motor pulley and the smooth side against the drum — this is the correct orientation for proper drive engagement. Because the belt is symmetrical, either end can face outward. A helpful tip from experienced installers: use two small pieces of tape to hold the belt against the drum while you lace it onto the idler and motor pulleys. From under or behind the drum, route the belt around the idler (tension) pulley and the drive motor pulley following the belt diagram for your model. Rotate the drum by hand a few full turns to confirm the belt seats correctly and rides smoothly without binding. While you have the machine apart, check that the idler pulley and drum support rollers spin freely — if they're rough or noisy, replace them now to protect the new belt. Reassemble the panels, restore power, and run a test cycle. Tools needed: Phillips screwdriver, nut driver, socket/ratchet, vacuum, work gloves, tape (helpful for holding the belt). Frequently Asked Questions My dryer runs but the drum won't turn — is the belt the problem? Almost certainly, yes. When the motor runs (you hear the humming) but the drum stays still, the belt has almost always snapped. To confirm without opening the dryer: reach in and try turning the drum by hand. If it spins freely with no resistance whatsoever, the belt is broken. If it turns but feels notchy or resistant, the belt may still be intact but the drum rollers or bearings could be the issue. Opening the dryer to inspect is the definitive check — a snapped belt will be lying in the bottom of the cabinet. On decades-old Maytag dryers, a belt that finally snapped from age is one of the most common repairs. Which way does the belt go — grooves in or out? Install the belt with the grooved (ribbed) side facing the motor pulley and the smooth side against the drum. The ribs engage the grooved motor pulley for positive drive without slipping, while the smooth side rides against the large drum surface. Note that this is the opposite orientation from some other dryer belts (like certain Frigidaire belts where grooves face the drum) — so don't assume; follow the grooves-against-motor-pulley rule for this Maytag/Whirlpool-platform belt. The belt is symmetrical end-to-end, so either end can face outward; only the grooved-vs-smooth orientation matters. Should I replace the idler pulley and drum rollers at the same time? It's strongly recommended, especially on older dryers. The idler (tension) pulley (WP6-3037050) keeps the belt under proper tension, and the drum support rollers (kit 12001541 / 303373K) carry the drum's weight as it turns. All wear from the same friction and heat cycles as the belt. In fact, a common piece of repair advice is: before you replace the belt due to noise, check the drum support rollers and idler pulley first — worn rollers or a seized idler are frequent noise sources, and if you replace only the belt, the new belt may wear out prematurely against a bad pulley. Since the dryer is already apart, replacing all three together is efficient and saves a repeat repair. What's the difference between Y312959 and WPY312959? These are the same drum belt across production revisions. Y312959 was the earlier Maytag part number and WPY312959 is the Whirlpool-era part number (after Whirlpool acquired Maytag) for the same belt. WPY312959VP is a variant packaging code. All are physically and functionally identical — if your dryer's parts diagram shows any of these numbers, this listing is the correct replacement. The many other cross-references (3-12959, 314774, LB234, P46-150, etc.) reflect the belt's long production history across decades of Maytag dryers. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Maytag/Whirlpool OEM part, but is manufactured from durable rubber to match the dimensions (100"L x 3/8"W), rib and groove pattern (5 ribs, 4 grooves), and drive function of the original Y312959/WPY312959 drum belt used in compatible Maytag, Jenn-Air, Whirlpool, Amana, and Kenmore dryers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO Dryer Replacement Part XPARTCO 754305 Dryer Motor Pulley for WP2200376 Replaces WP8066184 Quality aftermarket replacement motor pulley designed for compatible dryers using part numbers 754305, WP2200376, or WP8066184. Product Description The XPARTCO 754305 Dryer Motor Pulley is a quality aftermarket replacement part designed to restore proper belt drive operation in compatible dryers. The motor pulley mounts to the dryer motor shaft and transfers motor rotation to the drum belt so the drum can turn during the drying cycle. This part is intended for applications calling for 754305 or WP2200376 and replaces WP8066184. A worn, damaged, loose, or stripped pulley can cause poor drum rotation, unusual belt noise, belt tracking problems, or a dryer drum that does not turn correctly. Quick Answer XPARTCO 754305 is a dryer motor pulley used in compatible applications specifying WP2200376. It also replaces WP8066184. This is a quality aftermarket replacement part for restoring the motor-to-belt drive connection. Common Problems This Part Fixes Dryer drum does not turn even though the motor runs Drive belt slips or tracks incorrectly Squealing, scraping, or clicking near the motor pulley Pulley grooves are worn, chipped, cracked, or damaged Pulley is loose or stripped on the motor shaft Repeated belt wear caused by a damaged drive pulley Replaces part Number Use the following part numbers when checking fit and cross-reference information: 754305, WP2200376, WP8066184 Compatibility Designed for select dryers that specify motor pulley part number 754305, WP2200376, or the replaced number WP8066184. Dryer pulleys can appear similar while differing in shaft fit, groove profile, diameter, or belt alignment. Always verify the complete appliance model number and required part number before ordering. If you are unsure, compare your original pulley and model information before installation. Key Features XPARTCO quality aftermarket replacement part Designed for compatible dryer motor assemblies Transfers motor power to the dryer drive belt Helps restore proper drum rotation Direct replacement for specified compatible applications Cross-references 754305, WP2200376, and WP8066184 Product Specifications Brand XPARTCO Primary Part Number 754305 Compatible / Reference Number WP2200376 Replaces WP8066184 Part Type Dryer Motor Pulley Condition New Quality Quality aftermarket replacement part Application Clothes Dryer Primary Function Transfers motor rotation to the dryer drive belt Package Quantity 1 Motor Pulley Troubleshooting Guide Disconnect the dryer from electrical power before inspection or service. Inspect the drive belt for glazing, cracking, stretching, fraying, or uneven wear. Inspect the motor pulley grooves for wear, cracks, chips, deformation, or buildup. Check that the pulley is secure on the motor shaft and does not wobble or slip. Inspect the idler pulley and drum support components because related drive-system wear can produce similar symptoms. After repair, confirm the belt is routed correctly and aligned in the motor pulley grooves before operating the dryer. Safety: Unplug the dryer before service. If you are not comfortable working around electrical and mechanical components, installation should be performed by a qualified appliance technician. When Should You Replace This Part? The pulley is cracked, chipped, bent, or visibly worn The pulley grooves no longer hold or guide the belt correctly The pulley slips, wobbles, or does not stay secure on the motor shaft The dryer has recurring belt tracking or belt wear problems traced to the motor pulley Inspection confirms the original 754305, WP2200376, or WP8066184 pulley is damaged Shop With Confidence Choose XPARTCO for dependable appliance replacement parts and practical compatibility support. Verify your dryer model and required part number before ordering for the best fit. XPARTCO Quality Aftermarket Fast U.S. Shipping Compatibility Support

Read more less

XPARTCO WE03X37317 Dryer Drum Glide - Compatible with GE, Hotpoint, Kenmore Product Description Restore your dryer’s smooth operation with the WE03X37317 Dryer Drum Glide. This replacement glide supports the front of the dryer drum, ensuring smooth rotation. Designed for GE, Hotpoint, and Kenmore dryers, it fixes issues like squeaking, grinding, or improper drum rotation.  Note: Includes two glide. Replaces part numbers: WE03X37317, WE1M1067, WE01M0316, WE03X37317-50PK, WE1M1067-100PK, WE1M316, WE1M481, WE1M507, AP5668531, AP7217723, PS6447706, PS17137203. Compatibility: Compatible with models including but not limited to: GE: GTD42EASJWW, GTD65EBSJWS, GTD33EASKWW, GTX33EASKWW, GTD72EBPNDG Hotpoint: HTX24EASKWS, HTX21PASKWW Kenmore: 363.61542410 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand Compatibility: Fits select GE, Hotpoint, and Kenmore dryer models. 🔄 Specifications: Replacement plastic drum glide, ~2 11/16" x ⅝" polytetrafluoroethylene, clips onto drum support for reliable rotation. 💰 Cost-Effective: OEM performance at a competitive price. 🛠️ Easy Installation: Requires a screwdriver, putty knife, work gloves; typically installed in 20–40 minutes. 🛡️ Reliable Fixes: Resolves squeaking, grinding, or improper drum rotation. Installation Notes: Safety First: Unplug the dryer or shut off the circuit breaker before installation to avoid electrical shock. Remove top and front panels, access drum support, remove old glide, install new glide, and reassemble. Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running smoothly today! Add to cart now for a budget-friendly fix!

Read more less