ERP W10185981 Dryer Timer – Replaces WPW10185981 – Compatible with Whirlpool, Kenmore, Maytag, Estate, and Roper Dryers
Product Description
Restore accurate dryer cycle timing with the ERP W10185981 Dryer Timer. This high-quality replacement controls the duration of drying, auto-sense, and cooldown cycles. It is responsible for controlling and managing the timing and sequence of the various drying cycles and functions. A failing timer may cause the dryer to stop mid-cycle, run too long, not start, or remain stuck on one setting. Replacing it with this reliable ERP timer ensures smooth, consistent cycle operation at a cost-effective price.
Replaces Part Numbers
WPW10185981, W10185981, 1481704, 418-095-20-B5, PD00004725, EAP11749830, AP6016540, PS11749830.
Compatibility
This replacement dryer timer fits select Whirlpool, Kenmore, Maytag, Amana, Estate, Roper, and Crosley dryers.
Example compatible models include (but are not limited to):Whirlpool WED5300SQ0, Kenmore 110.65132411, Maytag MEDC200XW1, Estate EED4400WQ0.
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM timing accuracy and electrical performance
⏱️ Restores Cycle Control – Regulates drying, auto-sense, and cooldown cycles
💰 Cost-Effective Alternative – Reliable performance without OEM pricing
🛠️ Direct-Fit Installation – Plug-in wiring harness and standard mounting
🛡️ Fixes Common Issues – Solves timer not advancing, dryer not starting, or cycles running too long
📐 Product Specification
Part Number: W10185981
Component Type: Dryer Cycle Timer
Material: Reinforced polymer housing with internal metal timing mechanism
Mounting: Installs behind control panel
Electrical Rating: Matches OEM specifications
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Nut driver, Phillips screwdriver
⚠️ Safety First: Always unplug the dryer before performing repairs to prevent electrical shock.
Steps:
Disconnect power and remove the rear control panel cover.
Unplug the wiring harness from the old timer.
Remove mounting screws and take out the old timer.
Install the new ERP W10185981 timer in the same orientation.
Reconnect wiring, reinstall the panel, and restore power.
Test dryer cycles for proper operation.
⏱️ Time Required: 10–20 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore accurate dryer timing — Add to Cart Now for a dependable, budget-friendly repair!
ERP DC97-05280W Washer Suspension Rod
Replaces Part Numbers: DC97-05280W, 3998024, AP5966911, PS11719937
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO WH13X10014 Washer Water Inlet Valve
The XPARTCO WH13X10014 is an aftermarket replacement water inlet valve for GE washer/dryer combination units — a single cabinet that houses both wash and dry functions and shares one door, lid, and control system for both. This valve sits at the point where the hot and cold water supply lines connect, and it's the gatekeeper for every drop of water that enters the tub during the wash portion of a cycle. When the control calls for a fill, the valve's solenoid opens to admit water; once the correct level is reached, it closes again.
Common causes of failure include mineral or sediment buildup inside the valve body that prevents it from sealing fully, and a burned-out internal solenoid coil. A failing valve on a combo unit produces the same core symptoms you'd see on a standalone washer: the wash side won't fill, fills too slowly, won't stop filling, or leaks after the cycle ends — but because a combo unit shares more components in a single cabinet than separate machines do, it's worth confirming the water issue is isolated to the valve and not connected to other combo-specific parts nearby, such as our WH12X955 lid switch listing, which serves this same GE combo platform. It directly replaces WH13X0084, WH13X10013, WH13X84, AP3203931, and 944040.
Quick Answer
The XPARTCO WH13X10014 Washer Water Inlet Valve fixes GE washer/dryer combo units that won't fill with water, fill slowly, won't stop filling, or leak after the cycle ends. For GE's combination washer/dryer platform (WSM2420/WSM2480 series). Replaces WH13X0084, WH13X10013, WH13X84, AP3203931, 944040. This valve is specific to GE's washer/dryer combo unit — not a standalone front-load or top-load washer valve.
Common Problems This Part Fixes
Washer/dryer combo won't fill with water at the start of the wash cycle
Water fills much more slowly than normal
Unit won't stop filling — water continues past the normal level
Water leaking or dripping after the cycle has ended
Cycle stalling at the fill step and never advancing to wash
No hot water reaching the tub, or no cold water reaching the tub
Unit not washing properly due to insufficient or incorrect-temperature water
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer water inlet valve directly replaces the following OEM and cross-reference part numbers:
WH13X10014, WH13X0084, WH13X10013, WH13X84, AP3203931, 944040, AH756629, EA756629, AGE844170, PD00066092, PS756629
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select GE washer/dryer combination units, including model numbers such as:
GE WSM2420D0WW, WSM2420D1WW, WSM2420D2WW, WSM2420D3WW, WSM2420D4WW, WSM2420D5WW
GE WSM2420D0CC, WSM2420D1CC, WSM2420D2CC
GE WSM2420TAAWW, WSM2420TBAWW, WSM2420TCAWW, WSM2420TAAAA, WSM2420TAACC, WSM2420TBAAA
GE WSM2420SAZAA, WSM2420SBZAA, WSM2420SBZWW, WSM2420SCZAA, WSM2420SCZWW, WSM2420SDZWW
GE WSM2480D0WW, WSM2480D1WW, WSM2480D2WW, WSM2480D3WW
GE WSM2480SAZAA, WSM2480SAZWW, WSM2480SBZAA, WSM2480SBZWW, WSM2480SEZAA, WSM2480TCAWW
Note: This valve is built specifically for GE's washer/dryer combination units. It is not the same valve used on GE's standalone front-load washers (such as our WH13X10029 listing) and is not interchangeable with them. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement water inlet valve for GE washer/dryer combination units
Resolves "won't fill," "fills slowly," "won't stop filling," and "leaking after cycle" symptoms caused by valve failure
Solenoid-actuated design opens and closes precisely on the control's signal
Direct drop-in replacement — matches the original mounting and hose connections
Replaces WH13X0084, WH13X10013, WH13X84, AP3203931, and 944040
Compatible with GE washer/dryer combo units, including WSM2420 and WSM2480 series
Aftermarket replacement built to OEM-equivalent quality standards
Straightforward DIY repair using basic hand tools
Product Specifications
Part Number
WH13X10014
OEM Part Number
WH13X10014
Part Type
Washer Water Inlet Valve
Condition
Aftermarket Replacement
Application
GE Washer/Dryer Combination Units
Actuation
Solenoid-operated
Connections
Hot and cold water supply inlets
Quantity
1 valve
Compatible Brand
GE
Installation Notes
⚠️ Shut Off Water Supply And Unplug Unit Before Starting Disconnect power at the outlet or shut off the circuit breaker, and shut off both hot and cold water supply valves before beginning. Wear work gloves. On these combination units, the top of the cabinet often lifts off or opens as a single enclosure covering both the wash and dry sections, which also carries the lid switch wiring — note this connector's location before pulling the panel free. Disconnect the hot and cold water supply hoses from the back of the valve, keeping a towel handy for residual water. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector from the old valve, remove its mounting screws, and pull it free. Install the new WH13X10014 in the same position, reconnect the electrical connector fully, and secure the mounting screws. Reattach the hot and cold water supply hoses to the correct ports, tightening securely by hand plus a partial turn with pliers. Reinstall the cabinet enclosure, reconnecting the lid switch harness if it was disturbed, restore the water supply, and check every connection for leaks before restoring power. Run a short cycle and confirm the wash side fills at the normal rate with no leaking. Tools needed: Phillips screwdriver, pliers, towel, work gloves.
Frequently Asked Questions
Is this the same valve used on a standalone GE washer?
No. This valve is built specifically for GE's washer/dryer combination units, which share a single cabinet and control system for both wash and dry functions. GE's standalone front-load washers use a different valve (such as our WH13X10029 listing), and the two are not interchangeable. Always confirm whether your appliance is a combo unit or a standalone washer before ordering.
My unit won't stop filling. Is that this valve?
Yes, this is one of the most common symptoms of a failing valve. A worn internal seal can fail to close fully, letting water continue flowing even after the correct fill level is reached. Since this could lead to overflow, it's worth shutting off the water supply at the wall if you notice this happening rather than waiting to address it.
Only hot or only cold water isn't coming in. Do I need the whole valve?
Usually yes. Most washer inlet valves use two separate solenoid coils in one housing — one for hot, one for cold — but they're not typically sold or serviced as separately replaceable coils. If just one side has stopped working while the other functions normally, that still points to a failure inside this valve assembly, and replacing the complete unit is the standard repair.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the solenoid design, connection type, and mounting configuration of the original WH13X10014 valve used in compatible GE washer/dryer combination units.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WH16X26913 Washer Genuine OEM Suspension Rod and Spring
Rod and spring asm right- black
Description: The Rod and Spring Asm Right-Black is an OEM replacement part for GE washing machines. It is responsible for providing the necessary tension and support for the washer drum. This assembly includes a durable rod and spring that work together to balance the drum and minimize excessive vibrations during the wash and spin cycles.
Replaces Parts Numbers: WH16X26913, WH16X26714, AP6331892, PS12343383.
California Residents only
WARNING: California’s Proposition 65
DC34-00025G Washer Genuine OEM Lid Switch and Lock Assembly – Fits Samsung Washers
Product Overview
The DC34-00025G Washer Lid Switch and Lock Assembly is a genuine OEM replacement part that ensures your washer lid stays securely locked during wash and spin cycles. This part detects when the lid is closed and locks it to prevent accidental opening, providing safety and proper cycle operation. A worn or broken lid lock can cause your washer to stop mid-cycle, display error codes, or fail to start. Replacing it restores dependable washer performance and safety compliance.
Replaces Part Numbers
This lid switch and lock assembly replaces DC34-00025G, AP6884125, PS12720530.
Manufactured to original equipment specifications for a precise fit and long-term durability.
Compatible Brands
Compatible with select Samsung top-load washers manufactured by Samsung. Fits a variety of models using this specific lid lock assembly.
Fixes the Following Issues
Washer won’t start or stops mid-cycle
Lid doesn’t lock properly
Error codes related to lid switch or lock failure
Washer won't enter spin or drain cycles
Why Buy from Parts‑O‑Matic
Factory-original genuine OEM part
Fast and free U.S. shipping
Trusted by appliance professionals and DIYers
Backed by reliable customer support
WD12X24058 Dishwasher Genuine OEM Detergent Dispenser
Detergent Dispenser
Fits select LG Dishwasher models.
Replaces Part Numbers: AGM75469801, AP6234070, PS12078829.
Description: This Detergent Module is a Genuine OEM part for select LG dishwasher models. It is designed to dispense the correct amount of detergent at the appropriate times during the wash cycle, ensuring that dishes are cleaned effectively. The module holds the detergent and releases it into the dishwasher when needed, contributing to the overall performance and efficiency of the appliance.
EXPW79SC (4 Pack) Washing Machine Fill Hose Gasket with Screen
4 Pack
compatible with 5/ 8 inch washing machine and 3/4 inch garden hose
Fine Screen
the rubber washer with stainless steel filter mesh, serves as a flow restrictor can reduce the waste of water effectively
ERP 3129480 Dryer Drum Support Roller Shaft
Fits Specific Maytag, Amana, Admiral Dryer Models.
Replaces Part Number: WP6-3129480, 6-3129480, 1480353, 3-12948, 312948, W10912638, WP6-3129480VP, Y312948, AP6009858, PS11743031.
Description: The Dryer Drum Roller Axle is a replacement part for specific Maytag, Admiral, Whirlpool dryer models. It plays a role in the dryer's operation by offering support and an axis for the drum roller to spin smoothly. This guarantees effective and balanced tumbling of clothes throughout the drying cycle.
This is an aftermarket part that can be used as a replacement for the OEM part.
ERP 4901ER2003A Washing Machine Shock Absorber
Replaces Part Numbers: 4901ER2003A, 1335104, AH3583320, AP5226074, EA3583320, PS3583320, 383EER3001G, 383EER3001A, 1461630, 383EER3001F, 383EER3001H, 383EER3001K, 383EER3001L, AH3522311, AP4437743, EA3522311, PS3522311, WP34001303, 34001303, 1122379, DC66-00343C, AP6008426, PS11741563.
This is an aftermarket part that can be used as a replacement for the OEM part.
WARNING: California’s Proposition 65 (California Residents Only)
