AEB73764520 Genuine OEM LG Refrigerator Fan Grille Assembly
The AEB73764520 is a genuine LG OEM fan grille assembly for LG refrigerators. This grille sits around the evaporator fan, holding and directing the air the fan pushes so cold air is guided evenly throughout the refrigerator and freezer compartments rather than dispersing unevenly right at the fan. It also serves a protective role, shielding the spinning fan blade from accidental contact while still allowing full, unrestricted airflow through its vents.
Made of durable plastic, this grille can crack, warp, or break over time from the cold temperature cycling inside the freezer compartment, or from accidental impact during cleaning or organizing frozen food. A damaged grille typically shows up as uneven cooling or airflow within the compartment, since air isn't being properly guided and distributed, or in cases of significant damage, a fan blade that's no longer adequately shielded. Because parts that look similar can have small but meaningful differences in size and shape, it's important to confirm this exact part number matches your refrigerator before ordering, rather than relying on general appearance.
Quick Answer
The AEB73764520 Genuine OEM LG Refrigerator Fan Grille Assembly fixes LG refrigerators with a cracked, warped, or broken fan grille causing uneven cooling or airflow, or where the fan is no longer properly shielded. Genuine LG replacement part. Parts that look similar can have small but meaningful size and shape differences — always verify your exact model number before ordering.
Common Problems This Part Fixes
Uneven cooling or airflow within the refrigerator or freezer compartment
Visible cracks, warping, or breakage in the grille around the evaporator fan
Fan blade no longer adequately shielded due to grille damage
Grille that has come loose or won't seat securely in place
Reduced airflow efficiency affecting overall cooling performance
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
AEB73764520, 4952727, ALG53451, AP6873098, EAP12714296, PS12714296, PD00069980.
We were not able to confirm additional cross-reference or superseding part numbers for this specific part from reliable sources at the time this page was built, so none are listed here rather than guessed. If you have a cross-reference number for your appliance, contact our support team and we will verify compatibility before you order.
Compatibility
This fan grille assembly is compatible with select LG refrigerators, including French door and Door-in-Door smart refrigerator models such as LFXS26973S, LFXS26596S, and LFXS28596S.
Note: Parts that appear similar can have small but important differences in size and shape between LG refrigerator platforms. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine LG OEM part — factory-specified fit and airflow design
Holds and guides air from the evaporator fan for even, consistent cold air distribution
Resolves "uneven cooling," "poor airflow," and "cracked or broken grille" symptoms
Also shields the fan blade from accidental contact
Durable plastic construction
Direct drop-in replacement matching the original mounting
Compatible with select LG French door and Door-in-Door refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
AEB73764520
Part Type
Refrigerator Fan Grille Assembly
Condition
Genuine OEM
Brand
LG
Location
Around the evaporator fan
Function
Guides evaporator fan airflow and shields the fan blade
Material
Plastic
Quantity
1 fan grille assembly
Compatible Brand
LG
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves to protect your hands. Access is typically through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator fan area where the grille is mounted. Photograph the grille's orientation and any mounting clips or screws before removing it. Carefully remove the old grille from around the fan, taking care not to contact the fan blade itself. Install the new AEB73764520 grille in the same position, securing any clips or screws to hold it firmly in place. Reassemble the back panel, restore power, and monitor the refrigerator over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My cooling seems uneven, with some areas colder than others. Could this grille be the cause?
Yes, this is possible if the grille is cracked, warped, or has come loose. This grille's job is to guide the evaporator fan's airflow evenly throughout the compartment, so damage or misalignment can cause cold air to concentrate in some areas while other spots don't get adequate circulation.
Why does this part need to match my model so precisely?
Fan grille assemblies that look very similar at a glance can have small differences in size and shape between different LG refrigerator platforms, since the grille has to fit precisely around the specific fan and duct assembly used in your model. Ordering based on a general resemblance rather than confirming your exact model number risks a poor fit that doesn't seat or seal correctly.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original mounting and airflow design of the fan grille assembly originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10711017 Range Vent Hood Thermal Fuse
The replacement W10711017 Range Vent Hood Thermal Fuse is designed for Jenn-Air range hood models. This replacement fuse protects the range hood’s electrical system (e.g., fan or motor circuits) from overheating or power surges. Ideal for restoring functionality to Jenn-Air range hoods experiencing issues like no power, fan failure, or intermittent operation. This fuse is located on hood control board.
Note: Disconnect power before installation. Verify voltage and amperage compatibility with your appliance model.
Replaces part numbers: W10711017, AP5949884, PS10057091.
Compatibility (W10711017):
Compatible with select Jenn-Air range hood models, including but not limited to:
Jenn-Air: JXI8736DS00, JXI8742DS00, JXI8936DS00, JXW8736DS00, JXW8936DS00.
Verify your model number or contact our support team for assistance.
Key Features (W10711017):
✅ Brand Compatibility: Fits select Jenn-Air range hood models.
🔥 Specifications: Replacement thermal fuse, specifications vary by model (typically 125V–250V, verify amperage), heat-resistant, single-use.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires basic tools (e.g., screwdriver, pliers); typically installed in 10–15 minutes.
🛡️ Reliable Fixes: Addresses range hood issues like no power, fan failure, or intermittent operation.
Installation Notes (W10711017):
Safety First: Disconnect the appliance from the power source before installation.
Location: Typically found on the control board; consult your model’s manual for exact placement.
Tools: Use a screwdriver to access the fuse compartment and pliers to remove and install the fuse.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Get your microwave or range hood running today!
Add to cart now for a budget-friendly fix!
ES16100 Dishwasher Door Switch
Replaces Part Numbers: WD21X10261, 1263984, AH1481922, AP3994765, EA1481922, 16100, ES16100, PS1481922, WD21X0557, WD21X557
Description: The Interlock Switch is a replacement part for specific GE, Hotpoint electric and gas dryer and dishwasher models. This safety component monitors the door closure, preventing operation if the door is not securely closed and latched. The switch measures 2 inches long and 1/2 inch wide.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO WR60X10307 Refrigerator Evaporator Fan Motor
The XPARTCO WR60X10307 is an aftermarket replacement evaporator fan motor designed to circulate cold air throughout the refrigerator and freezer compartments. Restore efficient cooling with the replacement XPARTCO WR60X10307 Refrigerator Evaporator Fan Motor. This evaporator fan motor is designed for select GE, Hotpoint, RCA, and Kenmore refrigerators, circulating air over the evaporator coils to maintain consistent temperatures in both refrigerator and freezer compartments. It includes a 6-pin harness with a 2-wire thermistor, addressing issues like noisy operation, inconsistent temperatures, or frost buildup, offering a cost-effective alternative to OEM parts.
When the fan motor fails, cold air cannot circulate effectively, leading to warm refrigerator sections, frost buildup, or noisy operation. Replacing the evaporator fan motor restores airflow, improves cooling efficiency, and helps prevent food spoilage.
Quick Answer
The XPARTCO WR60X10307 Evaporator Fan Motor fixes refrigerators that are not cooling properly, have warm fresh food sections, or make unusual buzzing or grinding noises. It restores proper air circulation inside the unit.
Common Problems This Part Fixes
Refrigerator not cooling properly
Freezer cold but fridge section warm
Loud buzzing, humming, or grinding noise
Frost buildup around evaporator coils
Inconsistent temperature between compartments
No airflow from vents
Replaces Part Numbers
This evaporator fan motor replaces the following part numbers:
WR60X10307, WR60X10099, WR60X10224, WR60X30370, 197D4968G009, FDQT26GE6, AGE29301, PD00001317, EAP2364950, AP4438809, 1550741, PS2364950
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select refrigerators from the following brands:
GE refrigerators
Hotpoint refrigerators
Other compatible models using WR60X10307
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Circulates cold air across evaporator coils
Restores proper airflow and temperature balance
Offers OEM-equivalent performance at a lower price.
Reduces noise from worn or failing fan motors
Improves overall cooling efficiency
Direct replacement for WR60X10307 motor, evaporator fan motor, 9.75V DC, 3.25W, includes 6-pin harness with 2-wire thermistor.
Product Specifications
Part Number
XPARTCO WR60X10307
Part Type
Evaporator Fan Motor
Application
Refrigerator / Freezer
Condition
Aftermarket Replacement
Function / Specs
Air Circulation, 9.75V DC, 3.25W
Compatible Brands
GE, Hotpoint
Installation Notes
⚠️ Safety First — Disconnect Power Before Service Unplug the refrigerator before servicing. Access the evaporator fan by removing the rear freezer panel. Disconnect wiring harness and mounting screws, replace the fan motor, and reassemble. Ensure the fan spins freely before restoring power.
Frequently Asked Questions
What does the evaporator fan motor do?
It circulates cold air from the evaporator coils throughout the refrigerator and freezer compartments to maintain even cooling.
Will this fix a warm refrigerator section?
Yes, a failed evaporator fan motor is a common cause of warm fridge sections while the freezer remains cold.
Is this an OEM part?
This is a high-quality aftermarket replacement built to OEM-equivalent standards for reliable performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in high-quality replacement parts. Fast shipping from our U.S. warehouse and expert support available to help verify compatibility.
✓ Fast US Shipping ✓ Quality Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 675813 Dishwasher Thermal Fuse
The XPARTCO 675813 is an aftermarket replacement bimetal thermal fuse (TCO — thermal cut-off) kit compatible with a wide range of Whirlpool-family dishwashers including Whirlpool, Kenmore, KitchenAid, Maytag, Estate, Crosley, Inglis, Roper, and Admiral. The thermal fuse is a one-time safety device located on or near the control board that monitors internal temperature. If the dishwasher overheats — due to a blocked vent, malfunctioning heating element, or other fault — the fuse permanently interrupts power to protect the dishwasher and prevent fire hazards.
Unlike a resettable thermostat, a blown thermal fuse must be replaced. Once it trips, the dishwasher will show no power and will not start. The kit includes one thermal cutoff fuse with a 2-wire harness (leads extending approximately 18 inches from the fuse), one zip tie, and installation instructions. The fuse body measures 1-1/16" L x 1" W x 7/16" H. The new wiring harness must always be used when replacing the fuse. Installs in 5–15 minutes with basic hand tools.
Quick Answer
The XPARTCO 675813 Dishwasher Thermal Fuse Kit fixes Whirlpool-family dishwashers that show no power, won't start, have a blank control panel, or stopped mid-cycle with no response. The thermal fuse permanently trips when the dishwasher overheats and must be replaced. Kit includes fuse with 2-wire harness, zip tie, and instructions. Fuse body 1-1/16" L x 1" W x 7/16" H. Always install using the new harness included. Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, and more.
Common Problems This Part Fixes
Dishwasher completely dead — no power, no lights, no response when buttons are pressed
Control panel blank with no indicator lights or display
Dishwasher stopped mid-cycle and will not restart
Dishwasher will not start despite the door being closed and latched
No sounds when attempting to start the dishwasher
Dishwasher behaves as if it has no power even though the outlet is live
Replaces Part Numbers
This dishwasher thermal fuse kit directly replaces the following OEM and cross-reference part numbers:
675813, 3375557, 3376359, 675813VP, 679723, AH382828, OEM9345567, AWP39651 PD00002439, EA382828, EAP382828, AP3115186, PS382828.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermal fuse kit is compatible with select dishwashers from the following brands:
Whirlpool dishwashers
Kenmore / Sears dishwashers (Whirlpool-built models)
KitchenAid dishwashers
Maytag dishwashers
Estate dishwashers
Crosley dishwashers
Inglis dishwashers
Roper dishwashers
Admiral dishwashers
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Bimetal thermal cut-off (TCO) fuse — permanently interrupts power if the dishwasher overheats, protecting against fire hazard
One-time safety device — once tripped, the fuse must be replaced (it does not reset)
Rated at 98°C — trips when internal temperature exceeds the safe operating limit
Fuse body dimensions: 1-1/16" L x 1" W x 7/16" H; leads extend approximately 18" from fuse
Kit includes thermal fuse with 2-wire harness, zip tie, and installation instructions
Always install using the new harness included — never reuse the old harness
Metal and plastic construction — reliable performance and heat resistance
Direct replacement for 675813, 675813VP, 3375557, and 3376359 — no modification required
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 5–15 minutes with basic hand tools
Product Specifications
Part Number
675813
Part Type
Dishwasher Thermal Fuse / Thermal Cut-Off (TCO) Kit
Condition
Aftermarket Replacement
Fuse Type
Bimetal thermal cut-off (one-time, non-resettable)
Trip Temperature
98°C (208°F)
Fuse Body Dimensions
1-1/16" L x 1" W x 7/16" H
Lead Length
Approximately 18 inches from fuse body
Color
White / Brown
Material
Metal / Plastic
Kit Includes
Thermal cutoff fuse with 2-wire harness, zip tie, instructions
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Estate, Crosley, Inglis, Roper, Admiral
Installation Notes
⚠️ Unplug or Switch Off Breaker Before Starting Unplug the dishwasher or turn off the circuit breaker before beginning any repair. The thermal fuse is located inside the dishwasher door panel near the control board. Open the dishwasher door and remove all screws from the inner door panel — a Torx bit is typically required on Whirlpool-family models. Carefully lift the inner door panel to expose the control board housing. Remove the black plastic cover over the control board to access the thermal fuse — it is typically on the right side of the board with one wire connected to each terminal. Test the old fuse with a multimeter for continuity (no continuity confirms the fuse has blown). Disconnect the old fuse and its harness. Connect the new 675813 fuse using the new 2-wire harness included in the kit — do not reuse the old harness. Secure the harness with the included zip tie. Reinstall the control board cover, inner door panel, and all screws. Restore power and run a test cycle. Note: If the fuse blows again after replacement, an underlying cause such as a blocked vent, failed heating element, or faulty control board should be diagnosed before replacing the fuse a second time. Tools needed: Torx screwdriver (T15 or T20), Phillips screwdriver, multimeter, work gloves.
Frequently Asked Questions
What does the dishwasher thermal fuse do?
The thermal fuse is a one-time safety device that monitors the internal temperature of the dishwasher. If the temperature rises above the safe operating limit — 98°C in this case — the fuse permanently interrupts the electrical circuit, cutting all power to the dishwasher. This protects both the appliance and your home from fire hazard caused by overheating. Unlike a resettable thermostat, a blown thermal fuse cannot be reset and must be physically replaced.
How do I know if my thermal fuse has blown?
The most obvious sign is a completely dead dishwasher — no lights, no sounds, and no response when you press any buttons, even though the outlet has power. You can confirm a blown fuse with a multimeter: disconnect the fuse from the harness and test for continuity across its two terminals. A working fuse will show continuity (near-zero resistance); a blown fuse will show no continuity (open circuit). If the fuse tests bad, replace it with the 675813 kit.
Why did my thermal fuse blow, and will it happen again?
Thermal fuses blow when the dishwasher overheats. Common causes include a blocked air vent, a malfunctioning or shorted heating element, a failed thermostat, or an electrical fault in the control board. If you simply replace the fuse without addressing the root cause, it may blow again. After replacing the fuse, run the dishwasher and monitor for any unusual heat, steam, or burning smell. If the fuse blows again, have the underlying fault diagnosed before ordering another replacement.
Why must I use the new harness and not the old one?
When a thermal fuse blows, the wiring harness connected to it may have been exposed to the same overheating event that tripped the fuse. The wires or connectors may have degraded or partially melted even if they appear intact. Using the old harness risks a poor connection or a recurring fault. Always install the new 2-wire harness included in the kit to ensure a reliable, safe connection.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from metal and plastic to match the dimensions, trip temperature, and performance of the original 675813 thermal fuse.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
ERP 010222 Dryer Aluminum Duct Venting 4 inch. x 25 ft.
Please check your installation instructions and your local building codes for proper use. *Please note: ERP and Dryer manufacturers do not recommend vinyl poly venting or any venting cont. plastic. Exceeds UL® 181, Class 1 air connector label. Multiple design of metallic polyester. Steel wire support. Ideal for bathroom fan venting and other general venting. Manufacturer assumes no responsibility for failure due to improper installation.
FOIL DUCT 4" x 25'
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WE16X28 Dryer Blower Wheel - Compatible with GE, Hotpoint, RCA
Product Description
Ensure efficient drying with the XPARTCO WE16X28 Dryer Blower Wheel. This replacement part is designed for select GE, Hotpoint, and RCA dryers, particularly washer/dryer combos and laundry centers. It attaches to the drive motor shaft, circulating air through the drum and exhaust vent for optimal performance. Fixes issues like poor drying, loud noises, or no airflow, offering a cost-effective alternative to OEM parts.
What’s Included: One blower wheel.Important: Disconnect power before installation. Check exhaust venting for blockages to prevent repeat failures.
Replaces Part Numbers: WE16X28, 275422, WE16X0028, AH266148, EA266148, PD00027594, EAP266148, AP2043546, PS266148.
Compatibility
Compatible with models including but not limited to:
GE: WSM2700DAWCC, WSM2700DAWWW, WSM2700HAWWW, WSM2700HBWWW, WSM2700HCWWW, WSM2700TEWAB, WSM2700TEWWB, WSM2780TDWAB, WSM2780TDWWB
Hotpoint, RCA: Select washer/dryer combo models
Verify your model number or contact our support team for assistance.
Key Features
✅ Brand Compatibility: Fits select GE, Hotpoint, and RCA dryers.
💨 Efficient Airflow: Ensures proper air circulation for faster drying and reduced noise.
💰 Cost-Effective: OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Installs in 20–30 minutes with a screwdriver, pliers, and gloves.
🛡️ Reliable Fixes: Resolves poor drying, loud noises, or airflow issues.
Product Specifications
Part Number: XPARTCO WE16X28
Component Type: Dryer blower wheel
Material: Plastic (semi-gloss finish, some OEM versions may include metal)
Mounting: Attaches to drive motor shaft with clamp
Operating Conditions: Suitable for high-heat dryer environments
Compliance: Prop 65 warning for California
Installation Notes
Safety First: Unplug the dryer from the power source.
Access the blower wheel by removing the dryer’s front or rear panel (refer to manual).
Loosen the clamp or set screw to remove the old blower wheel.
Install the new XPARTCO WE16X28 blower wheel, securing it to the motor shaft.
Reassemble and test for proper airflow.
Tip: Clear exhaust vents to ensure long-term performance.
Shop now with a 30-day return policy for a reliable, budget-friendly fix!
131476300 Dryer Blower Wheel - Compatible with Frigidaire, Kenmore, Electrolux
Product Description
Keep your dryer running efficiently with the 131476300 Dryer Blower Wheel. This replacement part is designed for select Frigidaire, Electrolux, Crosley, Kenmore, Gibson, White-Westinghouse, Tappan, and Kelvinator dryers, particularly stackable units and laundry centers. It attaches to the drive motor shaft, circulating air through the drum and exhaust vent for optimal drying. Fixes issues like poor drying, loud noises, or no airflow, offering a cost-effective alternative to OEM parts.
What’s Included: One blower wheel.Important: Disconnect power before installation. Check exhaust venting for blockages to prevent repeat failures.
Replaces Part Numbers: 131476300, 1314763, 145746, 145746-A, 473, 5303212513, PD00000288, EAP417911, AH417911, AP2106979, EA417911, PS417911.
Compatibility
Compatible with models including but not limited to:
Frigidaire: FEX831FS0, GLGT1142CS0, GLGT1142CS1, FFLE3911QW0
Kenmore: 41761712510, 41761722510, 41771722510, 41790802990
Crosley, Gibson, White-Westinghouse, Tappan, Electrolux: Select stackable dryers and laundry centers
Verify your model number or contact our support team for assistance.
Key Features
✅ Brand Compatibility: Fits select Frigidaire, Electrolux, Crosley, Kenmore, Gibson, White-Westinghouse, Tappan, and Kelvinator dryers.
💨 Efficient Airflow: Ensures proper air circulation for faster drying and reduced noise.
💰 Cost-Effective: OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Installs in 20–30 minutes with a screwdriver, pliers, and gloves.
🛡️ Reliable Fixes: Resolves poor drying, loud noises, or airflow issues.
Product Specifications
Part Number: 131476300
Component Type: Dryer blower wheel
Material: Plastic (semi-gloss finish)
Mounting: Attaches to drive motor shaft
Operating Conditions: Suitable for high-heat dryer environments
Compliance: Prop 65 warning for California
Installation Notes
Safety First: Unplug the dryer from the power source.
Access the blower wheel by removing the dryer’s front or rear panel (refer to manual).
Loosen the clamp or set screw to remove the old blower wheel.
Install the new XPARTCO 131476300 blower wheel, securing it to the motor shaft.
Reassemble and test for proper airflow.
Tip: Clear exhaust vents to ensure long-term performance.
Shop now with a 30-day return policy for a reliable, budget-friendly fix!
Choice 5301EL1001J Dryer Heating Element Assembly - Compatible with LG, Kenmore
Product Description
Restore efficient drying with the replacement 5301EL1001J Dryer Heating Element Assembly. This heating element assembly is designed for select LG and Kenmore electric dryers, providing consistent heat (5400W, 240V) to dry clothes effectively. It includes the heating element, housing, high-limit thermostat, and thermal fuse, addressing issues like no heat, insufficient heat, or prolonged drying times, offering a cost-effective alternative to OEM parts.
Note: Includes one heating element assembly with housing, thermostat, and fuse. Disconnect power before installation. Check dryer venting and related components for optimal performance.
Replaces part numbers: 5301EL1001J, 5301EL1001A, 1377645, AEG72910307, AH3527791, AP4439759, EA3527791, PS3527791, 5301EL1001H, 1377645, 5301EL1001E, 5301EL1001G, 5301EL1001S, 5301EL1001U, 5301EL1001W, PD00001731, EAP3527791, AH3527790, AP5072170, EA3527790, PS3527790.
Compatibility:
Compatible with models including but not limited to:
LG: DLE0442W, DLE2516W, DLE5977W, DLE7177WM, DLE8377NM, DLE9577WM, DLEX4070V, DLEX8000W, DLEX5680W
Kenmore: 796.81022900, 796.91022900
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG and Kenmore electric dryers.
🔥 Specifications: replacement heating element assembly, 5400W, 240V.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 45–60 minutes.
🛡️ Effective Fixes: Resolves no heat, insufficient heat, or prolonged drying times.
Product Specification
Part Number: 5301EL1001J
Component Type: Dryer heating element assembly
Material: Metal (nickel-chromium alloy coil), ceramic insulators, metal housing
Electrical Specs: 5400W, 240V.
Mounting: Screw-mounted in dryer heater housing
Operating Conditions: Suitable for high-heat dryer environments
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer performing optimally today!
Add to cart now for a budget-friendly fix!
XPARTCO 694089 Dryer Blower Wheel Replaces WP694089
The XPARTCO 694089 is an aftermarket replacement dryer blower wheel compatible with a wide range of Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Roper, Estate, Crosley, Inglis, Caloric, Hardwick, and Glenwood 29-inch dryers with a lint filter on top. The blower wheel works together with the drive motor to create the airflow that makes drying possible — it draws heated air through the heating element, pushes it into and through the drum to evaporate moisture from your clothes, and exhausts it out through the vent system. Without a properly functioning blower wheel, airflow drops, drying times increase dramatically, and the dryer may overheat.
Measures 8-5/8" in diameter. Mounts on the motor's blower shaft with left-hand threads — to remove the old blower wheel, turn it clockwise (the reverse of standard threading). This blower wheel fits dryers where the motor is mounted in the rear of the cabinet, not the front. Common causes of failure: the internal sleeve wears out over time, allowing the wheel to wobble on the motor shaft; lint, socks, or small clothing articles escape past the lint filter and jam the wheel; or the plastic fins crack and break from age or debris impact. It directly replaces WP694089, WP694089VP, AP6010602, 279500, 279711, 299678, 338840, 343939, 343941, 686172, 695499, DE601, PS11743785, AH383953, EA383953, and PS383953. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The XPARTCO 694089 Dryer Blower Wheel fixes Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Estate, and Admiral 29" dryers that take too long to dry, make loud thumping/rattling/scraping noises, have weak airflow, or won't tumble. 8-5/8" diameter. Left-hand threads (turn clockwise to remove). Fits rear-mounted motor dryers with lint filter on top. Replaces WP694089, WP694089VP, AP6010602, 279500, 279711, 299678, 338840, 343939, 343941, 686172, 695499, DE601, PS11743785. Check for trapped lint, socks, or debris before replacing — a jammed wheel may not be broken.
Common Problems This Part Fixes
Dryer takes too long to dry clothes — reduced airflow from a worn or damaged blower wheel
Loud thumping, rattling, or scraping noise during operation — debris caught in the wheel or broken fins
Weak or no airflow from the exhaust vent — wheel wobbling or not spinning properly
Clothes still damp at the end of the cycle — inadequate air circulation
Dryer overheating — restricted airflow causing heat buildup
Blower wheel wobbling on the motor shaft — worn internal sleeve
Sock, small garment, or lint clump jammed in the blower wheel
Blower wheel fins cracked or broken from debris impact or age
Dryer running but drum not turning — severely damaged wheel preventing motor from spinning
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer blower wheel directly replaces the following OEM and cross-reference part numbers:
WP694089, 694089, 279500, 279711, 299678, 338840, 343939, 343941, 695499, DE601, PD00002470, EAP11743785, AP6010602, AWP48132, OEM18031815, PS11743785
If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Note: some Whirlpool dryers use a different blower wheel (such as the 697772) — verify your original part number or model number before ordering.
Compatibility
This blower wheel is compatible with select 29-inch dryers with a lint filter on top from the following brands:
Whirlpool dryers — 29" models with lint filter on top and rear-mounted motor (WED, LER, LEQ, LE series and related)
Kenmore / Sears dryers — select Whirlpool-built models (110-series)
Maytag dryers (select Whirlpool-built models)
KitchenAid dryers (select models)
Jenn-Air dryers (select models)
Amana dryers (select models)
Magic Chef dryers (select models)
Admiral dryers (select models)
Roper dryers (select models)
Estate dryers (select models)
Crosley, Inglis, Caloric, Hardwick, Glenwood dryers (select Whirlpool-built models)
Note: This blower wheel fits dryers where the motor is mounted in the rear of the cabinet (not the front). If your dryer has the motor in the front, this is not the correct blower wheel. Confirm your dryer model number before ordering. Also: before replacing the blower wheel due to noise, check for trapped lint, socks, or small garments caught in the wheel — clearing the debris may resolve the noise without needing a new part.
Key Features
Dryer blower wheel — draws heated air through the heating element, circulates it through the drum, and exhausts it through the vent system
Resolves "takes too long to dry," "loud noise," "weak airflow," "overheating," and "clothes still damp" symptoms when caused by a worn or damaged blower wheel
8-5/8" diameter — matches the original OEM dimensions
Left-hand threads — mounts on the motor's blower shaft (turn clockwise to remove, counterclockwise to install)
Designed for 29" Whirlpool-built dryers with lint filter on top and rear-mounted motor
Replaces WP694089, WP694089VP, AP6010602, 279500, 279711, 299678, 338840, 343939, 343941, 686172, 695499, DE601, PS11743785, AH383953, EA383953, and PS383953
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Roper, Estate, Crosley, Inglis, and more
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
694089
OEM Part Number
WP694089
Part Type
Dryer Blower Wheel
Condition
Aftermarket Replacement
Application
29" Dryers with Lint Filter on Top (Whirlpool platform)
Diameter
8-5/8"
Threading
Left-hand threads (clockwise to remove)
Motor Position
Rear-mounted motor (not front-mounted)
Function
Circulates heated air through the drum and out the exhaust vent
Location
Attached to the motor's blower shaft inside the blower housing
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Roper, Estate, Crosley, Inglis, Caloric, Hardwick, Glenwood
Installation Notes
⚠️ Disconnect Power Before Starting — 240V Circuit (Electric) or Gas Line (Gas) — Wear Work Gloves Disconnect power at the breaker before beginning — electric dryers operate on a 240V circuit. For gas dryers, also shut off the gas supply. Wear work gloves and safety glasses. Pull the dryer away from the wall. Access the blower wheel by removing the dryer's back panel — remove the screws securing the rear panel and set it aside. Locate the blower housing at the bottom rear of the dryer, connected to the motor. The blower wheel is inside this housing, mounted on the motor's blower shaft. Remove the blower housing cover or clamp to expose the wheel. Important: the blower wheel has left-hand threads. To remove the old blower wheel, turn it clockwise (the opposite of standard threading). If the wheel is stuck on the shaft, hold the motor pulley on the other end of the shaft to prevent it from turning while you unscrew the wheel. If the old wheel's plastic hub has seized on the shaft from age, you may need to use a flat-blade screwdriver to gently pry it — some customers report the old wheel breaks apart during removal, which is fine since you're replacing it. Before installing the new wheel, clean out any lint, debris, socks, or clothing articles from the blower housing. Thread the new 694089 blower wheel onto the motor shaft counterclockwise (remember: left-hand threads — counterclockwise tightens). Tighten firmly by hand. Reassemble the blower housing, reinstall the rear panel, push the dryer back into place, and restore power. Run a test cycle and check airflow at the exhaust vent. Tools needed: Nut driver, Phillips screwdriver, flat-blade screwdriver, work gloves, safety glasses.
Frequently Asked Questions
My dryer is making a loud thumping or rattling noise — is the blower wheel the cause?
It's one of the most common causes of dryer noise, yes. There are two main ways the blower wheel causes noise: first, lint, socks, or small clothing articles can escape past the lint filter and get caught in the wheel, where they hit the housing with each rotation — producing a rhythmic thumping or scraping sound. Second, the wheel's internal sleeve can wear out over time, allowing the wheel to wobble loosely on the motor shaft, which creates a rattling or vibrating noise. Before ordering a new wheel, check for trapped debris first — pull the back panel and inspect the blower housing. Clearing a stuck sock may solve the problem immediately. If the wheel wobbles freely on the shaft or has cracked/broken fins, it needs replacement.
Why does the blower wheel have left-hand threads?
The left-hand (reverse) threading is by design. The motor shaft spins in a direction that would naturally loosen a standard right-hand threaded wheel over time. By using left-hand threads, the motor's rotation actually tightens the wheel onto the shaft during operation, preventing it from working loose while the dryer runs. This means: turn clockwise to remove the old wheel (opposite of what you'd expect), and turn counterclockwise to tighten the new wheel onto the shaft. Many customers get stuck at this step because they instinctively turn counterclockwise to loosen — so if the wheel seems stuck, try turning it the other way first.
My dryer takes forever to dry — is the blower wheel the issue?
It can be, but check the easier things first. Long drying times are usually caused by restricted airflow, and the most common culprit is a clogged or kinked exhaust vent hose — clean the entire vent path from the dryer to the outside wall first. Also clean the lint filter and check the lint trap housing for buildup. If the vent system is clear and drying times are still long, the blower wheel is a strong candidate: a worn sleeve that lets the wheel wobble reduces its ability to move air efficiently, and cracked fins reduce airflow even if the wheel still spins. You can test by running the dryer and checking the airflow at the outside exhaust vent — weak or no airflow with a clear vent path points to the blower wheel.
Does this fit dryers with the motor in the front?
No — the 694089 blower wheel is designed for 29" Whirlpool-platform dryers where the motor is mounted in the rear of the cabinet. If your dryer has the motor in the front, it uses a different blower wheel. The easiest way to confirm: look at the back of the dryer — if you can see the motor and blower housing when the rear panel is removed, the motor is in the rear and this wheel fits (verify your model number too). If the motor is accessible from the front, this is not the correct part. Contact our support team with your model number and we'll confirm.
The old blower wheel is stuck on the shaft — how do I get it off?
First, make sure you're turning it the right direction — this has left-hand threads, so turn clockwise to loosen (the opposite of normal). If it's truly stuck from age or corrosion: hold the motor pulley on the other end of the shaft with one hand (or use pliers wrapped in a cloth) to keep the shaft from spinning, then turn the blower wheel clockwise with the other hand. If the plastic hub has seized, a flat-blade screwdriver can help gently pry it. In many cases, an old seized blower wheel will crack and break apart during removal — that's perfectly fine since you're replacing it anyway. Just make sure all the old pieces are cleared from the blower housing before installing the new wheel.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the 8-5/8" diameter, left-hand threading, sleeve, fin design, and airflow function of the original WP694089 blower wheel used in compatible Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and related 29" dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
W10717210 Dryer Lint Screen
Description: This lint screen is a replacement part compatible with specific Whirlpool manufactured dryer models. Located inside the air exhaust duct, it safely captures and contains stray lint before it escapes the dryer cabinet and ventilation system. The dual-layer screen traps built-up lint clumps during drying cycles through its precisely laid meshing. This prevents potentially dangerous lint accumulation elsewhere over time from multiple loads of laundry.
Replaces Part Numbers:WPW10717210, W11607443, W11522758, 8557857, 8559787, 8565972, W10641634, 8558463, W10717210, 2006, 2007, 26000348851, 348851, 689465, 8211, 8219, 8557882, 99989680, 99989681, 3379136, 348846, AP7193498, AP6023930, PS11757278.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
Genuine Whirlpool WP40113801 Dryer Thermal Fuse - Compatible with Whirlpool, Maytag, Kenmore
Product Description
Protect your dryer with the Genuine Whirlpool WP40113801 Dryer Thermal Fuse. This OEM high-limit thermal fuse is designed for select Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers, shutting off the heating element or motor when the dryer overheats to ensure safety. Crafted for precise fit and reliable performance, it addresses issues like the dryer not starting, running without heat, or stopping mid-cycle.
Note: Includes one single-use thermal fuse. Disconnect power before installation. Clean dryer vent during replacement to prevent future issues.
Replaces part numbers: WP40113801, 40113801, 14218937, 62600, 915698, WP40113801VP, PD00002494, EAP11742274, AP6009129, PS11742274.
Compatibility:
Compatible with models including but not limited to:
Whirlpool: SDG3606AWW
Maytag: LDG7600ABL, DG7500, LDG7800ABW, LDE9606ACE, LDG8410ABW
Amana, KitchenAid, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Kenmore: (select models, verify compatibility)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers.
🔐 Specifications: OEM single-use thermal fuse, rated for 360°F, through-hole mount.
💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting safety and durability.
🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 20–30 minutes.
🛡️ Effective Fixes: Resolves dryer not starting, no heat, insufficient heat, or abrupt stopping.
Product Specification
Part Number: Genuine Whirlpool WP40113801
Component Type: High-limit thermal fuse
Material: Metal and plastic
Temperature Rating: 360°F
Mounting: Through-hole mount, located behind lower front access panel
Operating Conditions: Suitable for household dryer environments
Compliance: UL listed, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your dryer safe and functional today!
Add to cart now for a reliable fix!
