XPARTCO 2315549 Refrigerator Evaporator Fan Motor Replaces WP2315549
The XPARTCO 2315549 is an aftermarket replacement evaporator fan motor for Whirlpool-built side-by-side refrigerators, located in the freezer section. This small motor pulls cold air off the evaporator coil and pushes it through the duct system to both the freezer and fresh food compartments. Without it circulating air, the coil itself keeps getting cold, but that cold air never reaches your food — the freezer, being closest to the coil, may hold up reasonably well for a while, but the fresh food compartment depends entirely on ducted airflow and drifts warmer and warmer as circulation weakens or stops.
This motor ships complete with its wiring harness, so nothing needs to be spliced or transferred from the old unit. Common failure modes include worn motor bearings that let the blade wobble or bind, ice buildup on the coil that jams the blade, and electrical failure of the motor windings. A simple way to check before ordering: with the refrigerator unplugged, try turning the fan blade by hand — it should spin freely with no grinding or resistance. It directly replaces WP2315549, 2220569, 1193008, AP6007250, PS11740362, and EAP11740362.
Quick Answer
The XPARTCO 2315549 Refrigerator Evaporator Fan Motor fixes Whirlpool-built side-by-side refrigerators with uneven cooling between compartments, frost buildup on the evaporator coil, unusual humming or buzzing noise, or a fresh food section that runs warmer than the freezer. Includes wiring harness. Replaces WP2315549, 2220569, 1193008, AP6007250, PS11740362, EAP11740362. Double-check the part number carefully — this is a different motor from our similarly numbered 2315539 listing, and the two are easy to mix up.
Common Problems This Part Fixes
Fresh food compartment running warmer than the freezer, or warmer than it used to
Uneven temperatures between shelves or between the fresh food and freezer sides
Frost or ice buildup accumulating on or around the evaporator coil
Unusual humming, buzzing, or grinding noise coming from inside the freezer
Noise that stops when the freezer door is opened and starts again once it's closed
Refrigerator running constantly as the compressor tries to compensate for poor circulation
Fan blade that doesn't spin freely, or spins with noticeable resistance, when checked by hand
Fridge section too warm or too cold, freezer section too warm or too cold
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
2315549, WP2315549, 2220569, 1193008, AP6007250, AWP47338, PD00002704, PS11740362, EAP11740362, ESF-U2A
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select Whirlpool-built side-by-side refrigerators across the Whirlpool family of brands, including:
Whirlpool side-by-side refrigerators
Maytag, Amana, and KitchenAid refrigerators (select Whirlpool-built models)
Jenn-Air, Admiral, Norge, and Roper refrigerators (select models)
Inglis refrigerators (select models)
Select Kenmore and Ikea refrigerators built on the Whirlpool platform
Verified model numbers include: 7GS2FHAXTA02, 7GS5FHAXTA00, ED2DHEXWB00, and ED2DHEXWL00.
Note — easy to confuse with 2315539: This part is 2315549, production number ESF-U2A. It is a separate, distinct motor from our 2315539 listing (production number ESF-U2B, replacing 2219689, 2225625, and W10438708), which serves a different set of models. The two part numbers differ by only a single transposed digit and are frequently mistyped or mixed up when ordering — double-check your old motor's part number or your appliance's full model number carefully before ordering. Contact our support team with your model number if you're unsure which motor you need.
Key Features
Aftermarket replacement evaporator fan motor with wiring harness included — nothing to splice or transfer
Circulates cold air from the evaporator coil throughout the freezer and fresh food compartments
Resolves "fresh food too warm," "uneven cooling," "frost buildup," and "humming or buzzing noise" symptoms caused by fan motor failure
Direct drop-in replacement matching the original mounting and blade fitment
Replaces WP2315549, 2220569, 1193008, AP6007250, PS11740362, and EAP11740362
Compatible with Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Admiral, Norge, Roper, Inglis, and select Kenmore refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Straightforward DIY repair — typically 15 to 30 minutes
Product Specifications
Part Number
2315549
OEM Part Number
WP2315549
Production Number
ESF-U2A
Part Type
Refrigerator Evaporator Fan Motor
Condition
Aftermarket Replacement
Brand
Whirlpool
Location
Freezer section, behind the rear panel near the evaporator coil
Kit Contents
Fan motor with wiring harness
Application
Side-by-Side Refrigerators
Repair Difficulty
Easy — 15 to 30 minutes
Quantity
1 fan motor
Compatible Brands
Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Admiral, Norge, Roper, Inglis, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Let The Freezer Thaw If Iced Over Disconnect power at the outlet before beginning, and move all food from the freezer to a cooler for the duration of the repair. Wear work gloves. Access is through the freezer's rear interior panel: remove the shelving and bins as needed, then remove the screws securing the back panel and set it aside to expose the evaporator coil and fan assembly. If you see significant frost or ice buildup around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing — ice can be masking the actual failure and can make the old motor difficult to remove cleanly. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and carefully pull the motor and fan blade assembly free — on many models the blade is a separate piece that pulls off the motor shaft. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new 2315549 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even cooling has returned. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
How is this different from your 2315539 listing? The numbers look almost identical.
They are genuinely different motors that happen to have nearly identical part numbers — 2315549 versus 2315539, just one transposed digit. This 2315549 motor carries production number ESF-U2A and replaces WP2315549, 2220569, and 1193008. Our separate 2315539 listing carries production number ESF-U2B and replaces a different set of numbers (2219689, 2225625, W10438708) for a different group of models. Because the numbers are so easy to mix up, we'd strongly recommend double-checking the exact number on your old motor, or your full refrigerator model number, before ordering either one.
My freezer seems fine but the fresh food section is warm. Is this the fan motor?
Yes, this is a very common and telling symptom pattern. The freezer compartment sits right next to the evaporator coil and can stay reasonably cold through simple proximity even with poor air circulation, but the fresh food compartment depends entirely on the fan pushing cold air through the ducting to reach it. When the fan motor fails or slows down, the fresh food side is usually the first and most noticeably affected area.
How can I test the motor before ordering a replacement?
With the refrigerator unplugged and the rear freezer panel removed, try turning the fan blade by hand. It should spin freely and smoothly with no grinding, binding, or resistance. If it doesn't turn freely, or doesn't turn at all, the motor has very likely failed. Also listen for humming or buzzing while the refrigerator is running — a motor trying and failing to turn often makes noise without actually moving air.
There's a lot of frost around the fan and coil. Should I address that first?
It's worth understanding which came first. Excess frost can be a cause of fan failure — a jammed, ice-bound blade can burn out the motor over time — or a result of it, since poor air circulation lets moisture condense and freeze unevenly around the coil area. Either way, thawing the ice out fully before installing the new motor makes the repair easier and lets you confirm the blade spins freely once everything is defrosted.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the mounting, wiring harness configuration, and airflow performance of the original WP2315549 evaporator fan motor used in compatible Whirlpool-built side-by-side refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
809069201 Refrigerator Genuine OEM Evaporator Fan Motor
Fits specific Frigidaire, Electrolux refrigerator models.
Description: This Evaporator Fan Motor is an OEM part for specific Frigidaire refrigerator models. It circulates air over the evaporator coils and throughout the refrigerator and freezer compartments, ensuring even cooling and maintaining the desired temperatures.
Replaces Part Numbers:809069206, 809069201, AP7014188, PS16544514.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO W10195839 Dishwasher Dish Rack Rear Adjuster Guide
Fits Specific Whirlpool, Maytag Dishwasher Models
Replaces Part Numbers: WPW10195839, W10195839, 1872227, AP6016799, PS11750092.
Description: This Rear Adjuster Guide is a replacement part for specific Maytag, Kenmore, Whirlpool dishwasher models, designed to ensure the smooth operation of the adjustable upper rack. This component plays a pivotal role in allowing the rack to move up and down effortlessly, accommodating various sizes of dishes and cookware.
This is an aftermarket part that can be used as a replacement for the OEM part.
3405-001117 Genuine OEM Refrigerator Dispenser Control Switch - Compatible with Samsung
Product Description
Restore your refrigerator’s dispenser functionality with the 3405-001117 Genuine OEM Refrigerator Dispenser Control Switch. This Samsung-manufactured microswitch is designed for select Samsung refrigerators, controlling the activation of the water and ice dispenser mechanism. It ensures reliable dispensing, addressing issues like unresponsive or intermittent water/ice dispensing for a seamless user experience.
Note: Includes (1) dispenser control microswitch. Disconnect power before installation. Verify compatibility with your refrigerator model.
Replaces part numbers: 3405-001117, DA34-00011A, 110634, 3727507, PD00033242, EAP11712663, AP5962465, PS11712663.
Compatibility:
Compatible with select Samsung refrigerator models, including but not limited to:
Samsung: RS2530BBP, RS2530BSH, RS2530BWP, RS2555BB, RS2555SL, RS2555SW, RS2577BB, RS2577SL, RS2577SW, RS2630SH, RS2630WW, RS265LABP, RS265LAWP, RS277ACBP, RS277ACPN, RS277ACWP
Common models: Samsung RS253BABB, RS253BAVQ, RS255BABB, RS255BASB, RS257BARB
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung refrigerators with water and ice dispensers.
🔧 Specifications: Genuine OEM Samsung microswitch, single-pole, double-throw (SPDT), 0.1A, 125/250V.
💪 Reliable Performance: Ensures precise activation of the water and ice dispenser mechanism.
🛠️ Easy Installation: Requires a screwdriver and pliers; typically installed in 15–20 minutes.
🛡️ Effective Fixes: Resolves unresponsive or intermittent water/ice dispensing issues.
Product Specification
Part Number: 3405-001117
Component Type: Refrigerator dispenser control switch
Material: Durable plastic housing with metal contacts
Operating Conditions: 0.1A, 125/250V, suitable for refrigerator dispenser environments
Compliance: UL-listed, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator’s dispenser working smoothly today!
Add to cart now for a reliable fix!
AEB73764520 Genuine OEM LG Refrigerator Fan Grille Assembly
The AEB73764520 is a genuine LG OEM fan grille assembly for LG refrigerators. This grille sits around the evaporator fan, holding and directing the air the fan pushes so cold air is guided evenly throughout the refrigerator and freezer compartments rather than dispersing unevenly right at the fan. It also serves a protective role, shielding the spinning fan blade from accidental contact while still allowing full, unrestricted airflow through its vents.
Made of durable plastic, this grille can crack, warp, or break over time from the cold temperature cycling inside the freezer compartment, or from accidental impact during cleaning or organizing frozen food. A damaged grille typically shows up as uneven cooling or airflow within the compartment, since air isn't being properly guided and distributed, or in cases of significant damage, a fan blade that's no longer adequately shielded. Because parts that look similar can have small but meaningful differences in size and shape, it's important to confirm this exact part number matches your refrigerator before ordering, rather than relying on general appearance.
Quick Answer
The AEB73764520 Genuine OEM LG Refrigerator Fan Grille Assembly fixes LG refrigerators with a cracked, warped, or broken fan grille causing uneven cooling or airflow, or where the fan is no longer properly shielded. Genuine LG replacement part. Parts that look similar can have small but meaningful size and shape differences — always verify your exact model number before ordering.
Common Problems This Part Fixes
Uneven cooling or airflow within the refrigerator or freezer compartment
Visible cracks, warping, or breakage in the grille around the evaporator fan
Fan blade no longer adequately shielded due to grille damage
Grille that has come loose or won't seat securely in place
Reduced airflow efficiency affecting overall cooling performance
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
AEB73764520, 4952727, ALG53451, AP6873098, EAP12714296, PS12714296, PD00069980.
We were not able to confirm additional cross-reference or superseding part numbers for this specific part from reliable sources at the time this page was built, so none are listed here rather than guessed. If you have a cross-reference number for your appliance, contact our support team and we will verify compatibility before you order.
Compatibility
This fan grille assembly is compatible with select LG refrigerators, including French door and Door-in-Door smart refrigerator models such as LFXS26973S, LFXS26596S, and LFXS28596S.
Note: Parts that appear similar can have small but important differences in size and shape between LG refrigerator platforms. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine LG OEM part — factory-specified fit and airflow design
Holds and guides air from the evaporator fan for even, consistent cold air distribution
Resolves "uneven cooling," "poor airflow," and "cracked or broken grille" symptoms
Also shields the fan blade from accidental contact
Durable plastic construction
Direct drop-in replacement matching the original mounting
Compatible with select LG French door and Door-in-Door refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
AEB73764520
Part Type
Refrigerator Fan Grille Assembly
Condition
Genuine OEM
Brand
LG
Location
Around the evaporator fan
Function
Guides evaporator fan airflow and shields the fan blade
Material
Plastic
Quantity
1 fan grille assembly
Compatible Brand
LG
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves to protect your hands. Access is typically through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator fan area where the grille is mounted. Photograph the grille's orientation and any mounting clips or screws before removing it. Carefully remove the old grille from around the fan, taking care not to contact the fan blade itself. Install the new AEB73764520 grille in the same position, securing any clips or screws to hold it firmly in place. Reassemble the back panel, restore power, and monitor the refrigerator over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My cooling seems uneven, with some areas colder than others. Could this grille be the cause?
Yes, this is possible if the grille is cracked, warped, or has come loose. This grille's job is to guide the evaporator fan's airflow evenly throughout the compartment, so damage or misalignment can cause cold air to concentrate in some areas while other spots don't get adequate circulation.
Why does this part need to match my model so precisely?
Fan grille assemblies that look very similar at a glance can have small differences in size and shape between different LG refrigerator platforms, since the grille has to fit precisely around the specific fan and duct assembly used in your model. Ordering based on a general resemblance rather than confirming your exact model number risks a poor fit that doesn't seat or seal correctly.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original mounting and airflow design of the fan grille assembly originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WPW10196393 Refrigerator Damper Control Assembly
The Genuine OEM Whirlpool WPW10196393 is the damper control assembly for select Whirlpool-built refrigerators, sold under brands including Kenmore, Maytag, KitchenAid and Amana. The damper meters cold air from the freezer into the fresh food section, and the refrigerator's thermostat controls it. When it fails, the fresh food section can run too warm or too cold, and the refrigerator may be noisy.
This is the original Whirlpool part, not an aftermarket equivalent. It is sold individually. Check your model number before ordering.
Quick Answer
The Genuine OEM WPW10196393 Damper Control Assembly replaces the damper that lets freezer air into the fresh food section when it has failed. Replaces W10196393, 67006116, W10127429 and W10196393N. Classic symptoms: the fresh food section is too warm or too cold, or the refrigerator is unusually noisy.
Common Problems This Part Fixes
Refrigerator section running too warm
Refrigerator section running too cold
Excessive noise
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This damper control assembly replaces or supersedes the following part numbers:
WPW10196393, 1481880, 67006116, W10127429, W10196393, W10196393N, AP6016813, EAP11750106, AWP49242, PD00004826, PS11750106
If your old assembly shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This damper control assembly is listed for refrigerators sold under Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Jenn-Air, Inglis, Dacor and other Whirlpool-built brands, including these examples:
Kenmore 59665232402, 59665234402, 59665239402, 59665262700, 59665332600, 59665932402, 59665934402
Kenmore 59666032603, 59669969013, 59669983014, 59669984010
KitchenAid KBRS22KWWH4
Maytag MFX2571XEW3, MBL1956KES6, MFI2665XEM4
Amana ABB2224WES0
Note: The models above are a sample, not a full list. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM Whirlpool part, not an aftermarket equivalent
Controls airflow from the freezer into the fresh food section
Works with the refrigerator's thermostat
Sold individually
Product Specifications
Part Number
WPW10196393
OEM Part Number
WPW10196393
Part Type
Refrigerator Damper Control Assembly
Condition
Genuine OEM
Manufacturer
Whirlpool
Quantity
1 Assembly
Application
Select Whirlpool-Built Refrigerators
Installation Notes
⚠️ Disconnect Power Before Installing Unplug the refrigerator before you begin. Remove the damper control cover, then the screws and foam protector behind it, and unplug the wire harness. Unclip the old assembly, clip in the new one, reconnect the harness, and reassemble in reverse order. Restore power and watch the damper open and close to confirm it lets air through.
Frequently Asked Questions
My refrigerator section is too warm or too cold. Is this the part I need?
It can be. If the freezer is cold but the fresh food section is not, the damper may not be opening. If the section is too cold or the refrigerator is noisy, the damper may be stuck open or failing. Confirm the damper is the cause before replacing it.
Is this an OEM or aftermarket part?
This is a genuine OEM part from Whirlpool, not an aftermarket equivalent.
Does this replace W10196393?
Yes. W10196393 is replaced by WPW10196393, and the assembly is also cross-referenced to 67006116, W10127429 and W10196393N. Substitute parts can look different from the original.
Will this fit my refrigerator?
It is listed for many Whirlpool-built models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
2187145 Refrigerator Genuine Compressor Overload
Replaces Part Numbers: WP2187145, OEM24024106, AP6006026, 2187145, 2-34286-038, 4431117, 8206664, PS11739089, W10306725.
Description: This Compressor Overload is a Genuine OEM part for specific Whirlpool, Kenmore refrigerator models.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
W10500004 Genuine OEM Whirlpool Refrigerator Bottom Door Hinge & Cam Kit (Right, Gray)
The W10500004 is a genuine Whirlpool OEM bottom door hinge and closing cam kit for the right side fresh food door on Whirlpool, Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, and Admiral refrigerators. This kit combines two related components: the bottom hinge, which supports the door's weight and lets it swing open and closed, and the closing cam, a plastic component that gives the door its final "pull" to close firmly on its own once you've pushed it most of the way shut.
Finished in Apollo Gray, this kit measures approximately 4.65" x 4.49" x 2.24" and weighs about 0.34 lbs. The plastic closing cam is the part most prone to wear — after years of use it can flatten out or crack, losing the contoured shape that pulls the door the rest of the way closed. A worn cam or hinge typically shows up as a door that won't close fully on its own unless you push it firmly shut, or a door that feels loose, sags, or doesn't swing smoothly on its hinge. It directly replaces AP5656407, 2684526, PS5573850, W10249949, W10257197, and W10257209.
Quick Answer
The W10500004 Genuine OEM Whirlpool Refrigerator Bottom Door Hinge & Cam Kit (Right, Gray) fixes Whirlpool, Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, and Admiral refrigerators where the right-side fresh food door won't close on its own unless pushed firmly shut, or the door feels loose or sags on its hinge. Apollo Gray finish. Replaces AP5656407, 2684526, PS5573850, W10249949, W10257197, W10257209. Mounting the closing cam requires a new screw, sold separately — the kit does not include it.
Common Problems This Part Fixes
Refrigerator door won't close fully on its own — has to be pushed firmly shut
Door that feels loose, sags, or doesn't swing smoothly on its hinge
Worn or flattened closing cam that no longer pulls the door shut
Visible cracks or wear on the plastic closing cam
Door that doesn't seal properly due to incomplete closing
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator bottom door hinge and cam kit directly replaces the following OEM and cross-reference part numbers:
2684526, W10249949, W10257197, W10257209, AP5656407, AWP40907, EAP5573850, PD00024325, PS5573850
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This bottom door hinge and cam kit is compatible with select Whirlpool refrigerators, and also fits select Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, and Admiral refrigerators built on the Whirlpool platform, as well as select Kenmore Elite and Ikea refrigerators, including model numbers such as 3WSC19D4AY00, 3WSC19D4XW00, 3WSC19D4XD00, 3WSC19D4XB00, 3WSC20N4XB00, and 3WSC20N4XW00.
Note — right side only: This kit is specific to the right-side fresh food door. A separate kit exists for the left side. This is also the lower door's hinge and cam kit — the upper door's closing cam is a different part sold separately. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which hinge kit your refrigerator needs.
Key Features
Genuine Whirlpool OEM part — factory-specified hinge and cam design
Combined kit — bottom hinge plus closing cam in one part
Resolves "door won't close on its own," "door feels loose," and "worn or cracked cam" symptoms
Apollo Gray finish
Approximately 4.65" x 4.49" x 2.24", 0.34 lbs
Direct drop-in replacement for the right-side lower door hinge and cam
Replaces AP5656407, 2684526, PS5573850, W10249949, W10257197, and W10257209
Compatible with Whirlpool, Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, and Admiral refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
W10500004
Part Type
Bottom Door Hinge & Closing Cam Kit
Condition
Genuine OEM
Brand
Whirlpool
Door Position
Right side, fresh food door, lower hinge
Color
Apollo Gray
Dimensions
4.65" x 4.49" x 2.24"
Weight
0.34 lbs
Additional Hardware Needed
New cam mounting screw (sold separately)
Repair Difficulty
Moderate — door removal required
Quantity
1 hinge and cam kit
Compatible Brands
Whirlpool, Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, Admiral, Kenmore Elite, Ikea
Installation Notes
⚠️ Unplug Refrigerator Before Starting — A New Cam Mounting Screw Is Required, Sold Separately Disconnect power at the outlet before beginning. Wear work gloves. Remove the top hinge cover, then remove the top hinge support to free the top of the door. Lift the door up and off the bottom hinge support to remove it completely — this is easier with a second person supporting the door's weight. Remove the old, worn closing cam and hinge from the bottom support. The manufacturer specifies that mounting the new closing cam requires a new screw, which is not included in this kit and must be ordered separately. Install the new W10500004 hinge and cam onto the bottom support, applying a small amount of lubricant such as petroleum jelly to the cam surface to help it move smoothly against the door once reassembled. Set the door back onto the bottom hinge support, making sure it seats correctly on the new cam. Reinstall the top hinge support and top hinge cover. Restore power and test the door by opening it partway and letting go — it should swing the rest of the way closed on its own if the cam is seated and lubricated correctly. Tools needed: 5/16" nut driver or socket, ratchet, small flat-blade screwdriver, work gloves.
Frequently Asked Questions
My door won't close all the way unless I push it. Is this the right part?
Yes, this is the classic symptom of a worn closing cam. When the cam is new, its contoured shape gives the door that final "pull" to swing closed on its own once you've pushed it most of the way shut. As the cam wears flat or cracks over years of use, it loses that pulling action, leaving the door to stay open unless you close it firmly by hand.
Do I need to buy anything else along with this kit?
Yes — per Whirlpool's own specifications, mounting the new closing cam requires a new mounting screw, which is sold separately and not included in this kit. Order that screw at the same time to avoid a delay partway through the repair.
Should I lubricate anything during installation?
Yes, it's recommended. Applying a small amount of lubricant, such as petroleum jelly, to the cam surface helps it move smoothly against the door once everything is reassembled, and can extend the life of the new cam by reducing friction wear.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original hinge design, cam shape, and Apollo Gray finish of the bottom door hinge and cam kit originally installed on your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
W10865826 Refrigerator Water Valve - Compatible with Whirlpool, KitchenAid, Maytag, JennAir, Kenmore
Product Description
Restore your refrigerator’s ice and water dispensing functionality with the replacement W10865826 Refrigerator Water Valve. This replacement part is designed for select Whirlpool, KitchenAid, Maytag, JennAir, and Kenmore refrigerators, ensuring precise water flow control for the ice maker or water dispenser. It resolves issues like no ice production, no water dispensing, or leaks, offering reliable performance and durability.
Note: Disconnect power and water supply before installation. Verify model compatibility for proper fit.
Replaces part numbers: W10865826, W10394076, WPW10394076, 4459687, W10726788, W10833705, W10872966, PD00041363, EAP11738056, AP6026312, PS11738056.
Compatibility:
Compatible with models including but not limited to:
Whirlpool: WRF736SDAM, WRF767SDHZ, WRX986SIHZ, KRFF507HPS
KitchenAid: KRMF706ESS
Maytag: MFI2570FEZ
JennAir: JFX2897DRM
Kenmore: 10651753710
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand Compatibility: Fits select Whirlpool, KitchenAid, Maytag, JennAir, and Kenmore refrigerators.
🔥 Specifications: Water inlet valve with solenoid, electrical connectors, and water line fittings.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires screwdriver, wrench, pliers; typically installed in 15–30 minutes.
🛡️ Effective Fixes: Resolves no ice, no water dispensing, or water leaks.
Product Specification
Part Number: W10865826
Component Type: Refrigerator water inlet valve
Material: Plastic housing, metal fittings, electrical connectors
Mounting: Secures to refrigerator frame with screws
Operating Conditions: Suitable for refrigerator water systems
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the refrigerator from power and water sources before installation. Follow the owner’s manual for guidance. Use plumber’s tape on threaded connections to prevent leaks.
Shop for high-quality replacement appliance parts with a 30-day return policy. Fix your refrigerator today!
Add to cart now for a reliable solution!
Genuine Refrigerator Replacement Part
WPW10276792 Refrigerator Genuine Water Reservoir Tubing
Genuine water reservoir tubing for select refrigerator water-dispensing systems.
Product Overview
The WPW10276792 Refrigerator Water Reservoir Tubing is a genuine replacement part designed for compatible refrigerators. The tubing routes and stores chilled water within the refrigerator water system before water is delivered to the dispenser.
Use this part when the original tubing is leaking, cracked, kinked, damaged, or otherwise unable to maintain proper water flow.
Quick Answer
WPW10276792 is genuine refrigerator water reservoir tubing for compatible models. Replace it when the original tubing is leaking, split, damaged, or restricting normal dispenser water flow.
Common Problems This Part May Fix
Water leaking inside the refrigerator
Cracked or split reservoir tubing
Kinked tubing restricting water flow
Reduced or inconsistent dispenser water flow
Damaged tubing connections or fittings
Replaces and Cross-References
WPW10276792, 1874366, 2223876, 2305226, 2307107, W10204356, W10276792, W10526445, WP2305226, AP6018425, AWP50256, EAP2580224, PD00028740, PS2580224
Part number is provided for identification. This listing is for a genuine replacement part.
Compatibility
Fits select refrigerators that specify water reservoir tubing part number WPW10276792.
Important: Verify the complete refrigerator model number and original tubing part number before ordering. Refrigerator water tubing can differ in length, routing, connector style, and reservoir design.
Key Features
Genuine replacement part
Designed for compatible refrigerator water systems
Routes and stores chilled dispenser water
Helps restore proper water flow and leak-free operation
Direct replacement for applications calling for WPW10276792
Product Specifications
Part Number
WPW10276792
Part Type
Refrigerator Water Reservoir Tubing
Application
Compatible Refrigerators
Function
Water storage and routing for dispenser system
Condition
New
Part Quality
Genuine Replacement Part
Package Quantity
1 Tubing Assembly
Installation & Troubleshooting Notes
Disconnect refrigerator power and shut off the household water supply before service.
Relieve water pressure from the dispenser system before disconnecting tubing.
Inspect the original tubing for leaks, splits, kinks, or damaged fittings.
Route the replacement tubing in the same path and orientation as the original.
Confirm all connections are fully seated and secure.
Restore the water supply and carefully check for leaks before returning the refrigerator to normal use.
Diagnostic tip: A dispenser leak may also come from a valve, connector, fitting, or dispenser line. Confirm the source of the leak before replacing the reservoir tubing.
Frequently Asked Questions
What does WPW10276792 do?
It routes and stores water within the refrigerator water system before the water is delivered to the dispenser.
Is WPW10276792 a genuine part?
Yes. This listing is for a genuine replacement water reservoir tubing assembly.
When should this tubing be replaced?
Replace it if it is leaking, cracked, split, kinked, damaged, or restricting normal water flow.
Will this fit every refrigerator?
No. Match the complete refrigerator model number and original part number before ordering.
Shop With Confidence
Verify your complete refrigerator model number before purchasing. Our compatibility team can help confirm whether WPW10276792 is correct for your appliance.
Genuine ReplacementWater Reservoir TubingModel Fitment SupportFast U.S. Shipping
WR57X30890 Refrigerator Genuine Water Valve
Water inlet valve assembly with Wire Harness
Replaces Part Numbers: WR57X30890, WR57X26569, WR57X30891, AP6891693, PS12727426.
Description: This water inlet valve is a Genuine OEM part for select GE Refrigerator models, responsible for controlling the flow of water into the refrigerator's ice maker and water dispenser. It is typically located at the back of the appliance, near the water supply line. The water inlet valve features quick-connect fittings for easy installation and ensures a reliable and steady supply of water for ice production and dispensing.
XPARTCO WR07X10131 Refrigerator Compressor Overload Relay
The XPARTCO WR07X10131 is an aftermarket replacement compressor start relay and overload, a PTCR combination device, for GE, Hotpoint, Kenmore, and RCA refrigerators. It plugs onto the compressor, helps the compressor start by managing the current it draws at startup, and protects it against overload while it runs. When it fails, the compressor may click but not start, and the refrigerator and freezer stop cooling.
This is a direct-fit aftermarket replacement for the original GE part. A failed relay is one of several causes of a compressor that won't run, so confirm the symptoms and test the relay before replacing it.
Quick Answer
The XPARTCO WR07X10131 Compressor Overload Relay fixes a GE, Hotpoint, Kenmore, or RCA refrigerator whose compressor clicks but won't start, or whose refrigerator and freezer have stopped cooling. Classic symptom: you hear a click from the back of the refrigerator every few minutes, the compressor never runs, and both compartments warm up.
Common Problems This Part Fixes
Refrigerator and freezer have stopped cooling
Compressor clicks but doesn't start
Compressor won't start at all
Compressor cycles on and off or trips repeatedly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This relay and overload directly replaces the following part numbers:
WR07X10131, WR08X10074, WR08X10089, WR08X10111, 197D6266P001, 5SP14A319NF, WR09X10124, AGE27632, AP4538934, AH2577842, EA2577842, EAP2577842, PD00001415, PS2577842
These numbers span several generations of GE's own part numbering for this relay as refrigerator models were updated. Confirm against your refrigerator's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This relay and overload is listed for GE, Hotpoint, Kenmore, and RCA refrigerators, including these examples:
GE CNE22SSEAFSS, GNE22GSEAFSS, PFSF2MIYAWW (bottom-mount)
GE CTH17RBT2RWW, GTH18CCEHRWW, GTS18HBSFRWW (top-freezer)
GE GSH22JGDBBB, GSL25JFXNLB
Note: One retailer lists this part for more than 600 models, so the models above are only a sample. GE's catalog page for the original part carries a warning about use with flammable refrigerants such as R600a, so confirm the part against your refrigerator's model number before installing. Contact our support team to verify fit before ordering.
Key Features
Direct-fit aftermarket compressor start relay and overload (PTCR combo)
Helps the compressor start and protects it against overload
Resolves no-cooling and clicking-compressor problems caused by a failed relay
Fits many GE, Hotpoint, Kenmore, and RCA refrigerators
Easy repair with basic hand tools, typically 15 to 30 minutes
Product Specifications
Part Number
XPWR07X10131
OEM Part Number
WR07X10131
Part Type
Refrigerator Compressor Start Relay and Overload (PTCR Combo)
Condition
Aftermarket Replacement
Location
On the Compressor
Application
GE, Hotpoint, Kenmore & RCA Refrigerators
Installation Notes
⚠️ Unplug Power Before Installing Unplug the refrigerator before beginning, and wear work gloves. Pull the refrigerator out and remove the rear access cover to reach the compressor, then disconnect the wire connector and any retaining clip, and pull the old relay straight off the compressor terminals. Push the new relay on in the same orientation, reattach the clip and connector, and replace the cover. Do not touch or disturb the sealed refrigerant lines. Allow the refrigerator several hours to cool after restoring power.
Frequently Asked Questions
My refrigerator isn't cooling and the compressor clicks. Is this the part I need?
A failed start relay and overload is a common cause of a clicking compressor that won't start. With the refrigerator unplugged, you can test the relay for continuity. A failed compressor or a failed run capacitor can look similar.
What does this part do?
It helps the compressor start by regulating the current sent to it at startup, and it protects the compressor from overload while it runs.
Do I need to open the sealed refrigerant system?
No. The relay plugs onto the compressor terminals from the outside, and the refrigerant lines are not touched.
Will this fit my refrigerator?
It is listed for many GE, Hotpoint, Kenmore, and RCA refrigerators, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
