WH1X2727 Washer Genuine Damping Strap
Replaces Part Numbers: WH1X2727, 2289, WH01X10028, WH01X10046, WH01X2727, WH1X10028, WH1X10046, AH271100, EA271100, AP2044899, PS271100.
Description: This Washer Tub Dampening Strap is a Genuine OEM part for select GE washing machine models. It plays a vital role in reducing vibrations and absorbing shocks during the wash cycle to provide stability and minimize excessive movement. Common causes of a bad dampening strap can include wear and tear over time, exposure to heavy loads or unbalanced loads that put excessive strain on the strap, or damage due to impact or mishandling.
W10467289 Washer Genuine OEM Temperature Sensor
Replaces Part Numbers: WPW10467289, W10467289, 2629420, 8181705, 8182291, 8540225, 8540226, W10176658, W10176659, OEM18065663, AP6021886,, PS11755214.
Description: This Water Temperature Sensor is a Genuine OEM part for specific Kenmore, Whirlpool washing machine models. This sensor ensures the water is reaching the proper temperature at each stage of the wash cycle.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO DC97-16350V Washer Suspension Rod Kit (Set of 4)
The XPARTCO DC97-16350V is an aftermarket replacement washer suspension rod kit (set of 4) compatible with select Samsung top-load washers in the WA48, WA50, WA52, and WA54 series. The suspension rods are spring-loaded shock-absorbing rods that connect the outer tub to the top of the washer cabinet, suspending the tub and dampening the vibrations generated during agitation and high-speed spin cycles. All four rods work together to keep the tub centered and stable — when one or more rods weaken, break, or lose their spring tension, the tub swings off-center and strikes the cabinet walls, causing violent shaking, banging, error code dc (out of balance), UE imbalance errors, and progressive damage to the washer cabinet and internal components.
Each rod is 27.5 inches in overall length and is constructed from spring steel with a plastic top cap and bottom cup that clip into the tub and cabinet mounting points. The kit includes all 4 suspension rods — always replace all four at the same time since the rods wear at the same rate. Installs in 20–30 minutes — no special tools required. Note: rods are coated with grease — wear gloves during installation.
Quick Answer
The XPARTCO DC97-16350V Washer Suspension Rod Kit fixes Samsung top-load washers that vibrate violently, bang loudly, walk across the floor, display dc or UE imbalance error codes, or stop mid-cycle during spin. Set of 4 rods, 27.5" overall length, spring steel. Replace all 4 at the same time. Wear gloves — rods are greased. Compatible with Samsung WA48, WA50, WA52, and WA54 series. Replaces DC97-16350V, AP6975426, EAP12740434, PS12740434, ASM34760, PD00071611
Common Problems This Kit Fixes
Washer vibrating violently or shaking excessively during the spin cycle
Loud banging or thumping — tub striking the cabinet walls during spin
Washer "walking" or moving across the floor during high-speed spin
Error code dc displayed — Samsung out-of-balance error during spin
Error code UE displayed — unbalanced load error the washer cannot correct
Washer repeatedly stopping and rebalancing the load without completing the spin cycle
Visible broken, detached, or sagging suspension rod visible inside the cabinet
Rattling or clunking noise during agitation — tub no longer centered
Replaces Part Numbers
This suspension rod kit directly replaces the following OEM and cross-reference part numbers:
DC97-16350V, AP6975426, EAP12740434, PS12740434, ASM34760, PD00071611.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This suspension rod kit is compatible with select top-load washers from the following Samsung series:
Samsung WA48 series — WA48H7400AW, WA48H7400AP, WA48J7700AW, WA48J7770AP and related models
Samsung WA50 series — WA50F9A6DSW, WA50F9A7DSP, WA50F9A7DSW, WA50F9A8DSP, WA50R5200AW, WA50R5400AV, WA50T5300AC and related models
Samsung WA52 series — WA52A5500AV, WA52A5500AW, WA52A5500AC and related models
Samsung WA54 series — WA54R7200AV, WA54R7200AW, WA54R7600AC, WA54R7600AV, WA54R7600AW, WA5AR7200AV and related models
Samsung WA45 series — WA45H7000AW, WA45K7600AW, WA45M7050AW (select models)
Kenmore / Sears top-load washers (select Samsung-built models)
Important: Samsung uses several different suspension rod lengths across its top-load washer lineup. The DC97-16350V is 27.5 inches long and is for larger-capacity WA48–WA54 series models. Shorter-capacity models (WA40–WA45) typically use DC97-16350C or DC97-16350U rods. Always verify your model number before ordering to confirm you need the 27.5-inch version.
Key Features
Set of 4 suspension rods — complete replacement kit covering all four tub mounting points
Suspends and centers the outer tub within the cabinet — dampens agitation and spin vibration to prevent tub-to-cabinet contact
Resolves Samsung error codes dc (out of balance) and UE (unbalanced load)
27.5 inches overall length — correct size for WA48, WA50, WA52, and WA54 series Samsung top-load washers
Spring steel construction with plastic top cap and bottom cup — durable and corrosion resistant
Rods are pre-coated with grease — wear work gloves during installation
Replace all 4 rods at the same time — rods wear together and partial replacement leads to uneven tub support
No special tools required — installs in 20–30 minutes
Replaces DC97-16350V, AP6975426, EAP12740434, PS12740434, ASM34760, PD00071611, and more
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
DC97-16350V
Part Type
Washer Suspension Rod and Spring Assembly
Condition
Aftermarket Replacement
Application
Samsung Top-Load Washers — WA48, WA50, WA52, WA54 series
Quantity
Set of 4 (replace all four rods at the same time)
Rod Length
27.5 inches overall
Material
Spring steel / Plastic / Metal
Color
Black / Silver / Gray
Lubrication
Pre-coated with grease — wear gloves during installation
Error Codes Resolved
dc (out of balance), UE (unbalanced load)
Compatible Brands
Samsung, Kenmore (Samsung-built)
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Gloves Disconnect power and turn off the water supply before beginning. Wear work gloves throughout — the suspension rods are coated with grease. Remove the lid of the washer and the top panel (typically secured by screws under the lid hinge covers and at the rear corners). With the top panel removed, the four suspension rods are visible, each running from a mounting point on the tub rim up to a hook or bracket at the top corners of the cabinet frame. Note the orientation and attachment method of each rod before removing. Unhook the top of the old rod from the cabinet bracket and lift the bottom cup off the tub mounting pin. Install each new DC97-16350V rod by seating the bottom cup onto the tub mounting pin and hooking the top over the cabinet bracket. Replace all four rods before reassembling. Reinstall the top panel and lid, restore power and water, then run a spin cycle to verify smooth, stable operation. Tools needed: Phillips screwdriver; no special tools required for the rods themselves.
Frequently Asked Questions
What do the suspension rods do?
The suspension rods are spring-loaded shock absorbers that hang the outer washer tub from the top corners of the cabinet frame. They suspend the tub in the center of the cabinet and absorb the vibrations and movement generated during agitation and high-speed spin cycles. As long as all four rods have equal spring tension, the tub stays centered and stable. When one or more rods lose tension, stretch, or break, the tub is no longer held evenly and begins to swing off-center during spin — striking the cabinet walls, causing the loud banging, vibration, and imbalance error codes that indicate the rods need replacement.
Why must I replace all 4 rods instead of just the broken one?
All four suspension rods experience the same amount of wear over the same number of wash cycles. When one rod fails, the remaining three have experienced the same stress and fatigue and are likely to fail soon after. Replacing only the broken rod leaves three worn rods supporting the tub unevenly, which can cause the new rod to wear faster and may not fully resolve the vibration problem. Replacing all four at the same time ensures even tub support, fully resolves the imbalance, and prevents a repeat repair in the near future.
What do error codes dc and UE mean on Samsung washers?
On Samsung top-load washers, error code dc (or sometimes dC) means the washer has detected an out-of-balance condition during the spin cycle and has stopped to prevent damage. Error code UE means an unbalanced load that the machine cannot automatically correct by redistributing. Both codes can be caused by an actual overloaded or unevenly distributed laundry load — but if the errors occur frequently even with normal loads and proper load distribution, worn or broken suspension rods are the most common mechanical cause. Replacing the rod kit resolves these errors in most cases.
How is the DC97-16350V different from DC97-16350U or DC97-16350S?
The DC97-16350V, DC97-16350U, and DC97-16350S are all Samsung suspension rods, but they have different lengths for different washer model generations and capacities. The DC97-16350V is 27.5 inches long and is used on larger-capacity WA48–WA54 series Samsung washers. The DC97-16350U is approximately 26.4 inches and is used on mid-capacity WA45–WA50 series models. The DC97-16350S and DC97-16350C are shorter versions for earlier or smaller-capacity models. Using the wrong length rod can cause the tub to sit at the incorrect height inside the cabinet. Always verify your model number before ordering to confirm the correct rod length.
Is this an OEM or aftermarket part?
This is an aftermarket replacement kit built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured from spring steel with plastic end caps to match the length and spring tension of the original DC97-16350V suspension rods.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
8540101CM Washer Drive Belt
Washing machine inner tub drive belt
6 Rib, 51.33"
Description: The Drive Belt is a replacement for specific Whirlpool, Maytag, Kenmore washer models. It transmits power from the washer motor to the tub, causing it to rotate during wash and spin cycles Causes of a worn drive belt can include repetitive cycles over years of use. The belt undergoes stress each time the tub is set in motion. Damage from slipping off pulleys during operation can also affect the belt.
Replaces Part NumbersWP8540101, 8540101, 8540348, AP6013037, PS11746258
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
2187145 Refrigerator Genuine Compressor Overload
Replaces Part Numbers: WP2187145, OEM24024106, AP6006026, 2187145, 2-34286-038, 4431117, 8206664, PS11739089, W10306725.
Description: This Compressor Overload is a Genuine OEM part for specific Whirlpool, Kenmore refrigerator models.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO 5304519906 Dishwasher Pump and Motor Assembly
Product Overview
The XPARTCO 5304519906 Dishwasher Pump and Motor Assembly is designed to circulate water through the spray arms and ensure proper cleaning performance. This Motor & Pump Assembly is a replacement part for specific Frigidaire dishwasher models. This assembly is crucial for circulating water throughout the dishwasher during the wash and rinse cycles, ensuring that dishes are cleaned effectively. You should replace this motor and pump assembly if it becomes faulty. Common causes of a bad motor and pump assembly include electrical issues, wear and tear from regular use, or blockages caused by debris or food particles.
Quick Answer
If your dishwasher is not cleaning dishes, has weak spray pressure, makes unusual noises, or fails to circulate water, the 5304519906 pump and motor assembly may be faulty. Replacing it restores proper wash performance and water circulation.
Replaces Part Numbers
Replaces OEM part number: 5304519906, 154843901, EAP12712308, AFR18422, PD00053471, AP6840161, P154792801.
Compatibility
This pump and motor assembly is compatible with select Frigidaire, Electrolux, Kenmore, and other compatible dishwashers.
Frigidaire Dishwashers
Electrolux Dishwashers
Kenmore Dishwashers
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Dishes not getting clean
Weak or no water spray
Dishwasher making loud or grinding noise
Water not circulating during wash cycle
Key Features
Integrated pump and motor assembly
Restores strong water circulation
High-quality aftermarket replacement
Reliable and durable construction
Product Specifications
Part Number: XP5304519906
Part Type: Dishwasher Pump and Motor Assembly
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Dishwasher Water Circulation
Troubleshooting Guide
Dishes remain dirty → Weak or failed pump motor
No spray action → Pump not circulating water
Loud noise during wash → Motor or impeller issue
When Should You Replace This Assembly?
Replace this assembly if your dishwasher is not cleaning properly, lacks water pressure, or makes abnormal noises during operation.
Installation Notes
⚠️ Disconnect power and water supply before installation. Access the pump and motor assembly from the bottom of the unit and install securely according to your dishwasher model.
Related Parts
Dishwasher Spray Arm
Water Inlet Valve
Drain Pump
Frequently Asked Questions
Will this assembly fit my dishwasher?This part fits many Frigidaire and compatible dishwashers. Always verify your model number.
What does a pump and motor assembly do?It circulates water through the dishwasher to clean dishes effectively.
What are signs of a bad pump motor?Poor cleaning, weak spray, or loud noises during operation.
Is this OEM or aftermarket?This is a high-quality aftermarket replacement part.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
W10757833 Dishwasher Control Panel
Fits specific KitchenAid dishwasher models.
Replaces Part Numbers: W10757833, 8531268, 3452787, 8531265, 8531537, 8564487, 8564565, AP5956414, PS10064580.
Description: This Rack Adjuster is a Genuine OEM part for Whirlpool dishwashers, designed to allow for the easy adjustment of the dishwasher rack's height. This feature accommodates dishes of various sizes. By providing the flexibility to adjust the rack height, this part enhances the dishwasher's adaptability to different washing needs.
WP12956202 Refrigerator Water Reservoir & Filter Head Assembly - Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana
Product Description
Restore your refrigerator’s water and ice dispensing with the WP12956202 Water Reservoir & Filter Head Assembly from Parts-O-Matic. This genuine OEM replacement stores filtered water and directs it to the dispenser and ice maker. Designed for Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore refrigerators, it fixes issues like no/slow water flow, leaks, or ice maker failure.
Note: Includes one reservoir and filter head assembly. Take photos of tubing and wiring during disassembly. Use a compatible water filter and flush the system post-installation.
Replaces part numbers: WP12956202, 12956202, 12956204, 1401909, 67006323, PD00024187, EAP11738655, AP6005603, PS11738655.
Compatibility:
Compatible with models including but not limited to:
Whirlpool: WRF535SMBM00, WRF555SDFZ00, WRX735SDHZ00
Maytag: MFI2570FEZ00, MFW2055FRZ00
KitchenAid: KRFC300ESS01, KRMF706ESS01
Jenn-Air: JFX2897DRM00
Amana: ASI2575GRS01
Kenmore: 106.51173310
Verify your model number or contact Parts-O-Matic support for assistance.
Key Features:
✅ Brand Compatibility: Fits select Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Kenmore refrigerators.
💧 Specifications: OEM plastic reservoir, tubing, and filter head with connectors for reliable water dispensing.
💰 Cost-Effective: OEM performance at a competitive price.
🛠️ Easy Installation: Requires a screwdriver, pliers, work gloves; typically installed in 30–60 minutes.
🛡️ Reliable Fixes: Resolves no/slow water flow, leaks, or ice maker failure.
Installation Notes:
Safety First: Unplug the refrigerator and shut off the water supply before installation to avoid shock or leaks.
Access the assembly (behind crisper drawers or back panel), disconnect tubing and wiring, install the new assembly, reconnect, and test for leaks. Flush 2–3 gallons of water post-installation.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your refrigerator running smoothly today!
Add to cart now for a budget-friendly fix!
XPARTCO W10677723PL Washer Motor Pulley - Compatible with Whirlpool, Maytag, Kenmore, Crosley Washer Motor W10677723
Product Description
Restore smooth operation to your washer with the replacement XPARTCO W10677723PL Washer Motor Pulley. This replacement motor pulley is designed for select Whirlpool, Maytag, Kenmore, and Crosley top-load washers, connecting the motor to the transmission for efficient power transfer. It addresses issues like excessive noise, belt slippage, or failure to spin, offering a cost-effective alternative to OEM parts.
Note: Includes one motor pulley (2-5/16" diameter, 4 ribs, 5 grooves). Sold individually. Disconnect power before installation. Verify compatibility with your washer model.
Replaces Pulley for Motor part numbers: W10677723, 4461547, AP6038394, PS11770267, EAP11770267
Compatibility:
Compatible with models including but not limited to:
Whirlpool: MVWC565FW0, MVW4505MW0, WTW5010LW0, WTW5015LW0, WTW5057LW0, WTW5100HC0, WTW5100HC1, WTW5100HC2, WTW5100HC3, WTW5100HW0, WTW5100HW2, WTW5100HW3, WTW5105HC0, WTW5105HC1, WTW5105HC2, WTW5105HW0, WTW5105HW1, WTW5105HW2, WTW6120HC0, WTW6120HC1, WTW6120HC2, WTW6120HC3, WTW6120HW0, WTW6120HW1, WTW6120HW2, WTW6120HW3, 8TWTW5010PW0, 8TWTW5057PW0
Maytag: MVWC565FW0, 7MMVWC565FW0, MVW4505MW0, MVW4505MW1, MVW4505MW2, MVW5035MW0, MVW5035MW1, MVW5035MW2, MVW5430MW0, MVW5430MW2, MVW5430PBK0, MVW5435PBK0, MVW5435PW0, MVW6200KW0, MVW6200KW1, MVW6200KW2, MVW6200KW3, MVW6230HC0, MVW6230HC1, MVW6230HC2, MVW6230HC3, MVW6230HW0, MVW6230HW1, MVW6230HW2, MVW6230RHW0, MVW6230RHW1, MVW6230RHW2, MVW6230RHW3, MVW6500MBK0, MVW6500MW0, MVWC565FW1, MVWX655DW1
Kenmore: 11022352510, 11022352511, 11021112020, 11021112021, 11031312021, 11031312022
Crosley: CAW42114GW0, CAW42114GW1, CAW45125LW0
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, and Crosley top-load washers requiring W10677723PL.
🔥 Specifications: Precision-engineered motor pulley, 2-5/16" diameter, 4 ribs, 5 grooves, designed for secure belt engagement and efficient power transfer.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, work gloves, optional pry tool; typically installed in 15–30 minutes.
🛡️ Effective Fixes: Resolves issues like excessive noise, belt slippage, or failure to spin.
Product Specification
Part Number: XPW10677723PL
Component Type: Washer motor pulley
Material: Durable plastic with reinforced ribs
Terminal Type: Fits motor shaft with locking tabs
Operating Conditions: Suitable for high-torque washer environments
Compliance: Prop 65 warning for California
XPARTCO W10006355 Washer Shift Actuator
Fits specific Maytag, Kenmore, Whirlpool top-load machine models.
Replaces Part Numbers: WPW10006355, W10006355, AP6014711, PS11747977.
Description: This Shift Actuator is a replacement part for specific Maytag, Kenmore, Whirlpool washing machine models. It is an electronic component located inside the transmission that controls the shifting between wash cycles. The shift actuator receives signals from the washer control board to change modes, initiating proper movements to advance the cycle.
This is an aftermarket part that can be used as a replacement for the OEM part.
ACP72929002CM Washer Shift Actuator
Coupling Assembly Shift actuator.
Fits specific LG top load washer models.
Replaces Part Numbers: ACP72929002, 4323EA2001C, 1958330, 2653835, ACP73029001, AH3522903, EA3522903, 4323EA2001B, 1327673, AH3577589, EA3577589, AP5674447, AP5258825, PS7786658, PS3522903, AP5245586, PS3577589
Description: This Top Load Washer Coupling Assembly is a replacement component specifically designed for specific LG brand top-loading washing machine models. This assembly connects the agitator shaft to the transmission inside the washer, allowing oscillating motions to be transferred through the transmission from the motor.
This is an aftermarket part that can be used as a replacement for the OEM part.
