Search results for "Filter Housing"

Genuine OEM 4317943 Refrigerator Ice Maker Kit The 4317943 is a genuine OEM ice maker assembly kit from Whirlpool for Whirlpool-built refrigerators sold under the Whirlpool, Kenmore, KitchenAid, Maytag, Jenn-Air, Amana, Roper, and related names. The ice maker is the unit in the freezer that fills with water, freezes it, and ejects the cubes into the ice bin. Over time, contacts corrode and the mechanism wears out, and the refrigerator may make little or no ice, make too much, or leak water from the unit. This is a complete replacement ice maker, so you swap the whole unit rather than hunting for a failed internal component. As a genuine OEM part, not an aftermarket equivalent, it matches the original factory fit and specification. The kit does not include the shut-off arm. Transfer the arm from your original ice maker, or order the arm for your model. Quick Answer The Genuine OEM 4317943 Ice Maker Kit fixes a Whirlpool-built refrigerator that is not making ice, making too little or too much ice, or leaking from the ice maker. Complete ice maker assembly, genuine OEM from Whirlpool, 120 V. Classic symptom: the ice bin stays empty even though the water supply, filter and freezer temperature are all fine. Common Problems This Part Fixes Ice maker not making ice Ice maker producing too little ice, or too much Ice maker not dispensing ice into the bin Water leaking from the ice maker Corroded contacts or a worn-out mechanism Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This ice maker kit replaces the following part numbers: 4317943, 1857, 4317943R, 4317943VP, 46000978556, 46004211173, 480616, 480617, 482014, 482015, 482016, 482017, 482018, 482019, 482020, 482394, 482433, 482990, 625601, 625603, 625610, 625611, 625622, 625625, 625653, 625656, 625660, 626002, 626201, 626237, 626366, 626461, 626489, 626608, 626609, 626626, 626640, 626670, 626687, 627572, 68972-4, 797991, 8114, 833701, 978552, 978553, 99989730, M626687, W10122496, W10190952, W10281545, W10632400, AP2984633, AH358591, AWP39706, EA358591, PD00002471, PS358591 This one kit replaced many Whirlpool ice maker numbers across decades of models. Match the number on your old ice maker or parts diagram against the list above. Distributor and catalog numbers are not shown here. Compatibility This ice maker kit is listed for refrigerators from the Whirlpool family of brands: Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper Kenmore, including models such as 2537616800, 2537616820, and 2537618100 Note: The model list above is only a sample, since this kit fits a very large number of models. Confirm fit by matching the number on your old ice maker or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order. The kit does not include the shut-off arm. If the wiring harness on the kit doesn't work with your refrigerator, you can reuse the harness from your existing ice maker. Key Features Genuine OEM Whirlpool ice maker assembly, not an aftermarket equivalent Complete unit with plastic housing and metal ice tray 120 V, 60 Hz Replaces corroded contacts and faulty assemblies in one swap Replaces dozens of earlier Whirlpool ice maker numbers Easy installation, typically 30–60 minutes with basic hand tools Product Specifications Part Number 4317943 OEM Part Number 4317943 Part Type Refrigerator Ice Maker Assembly Kit Condition Genuine OEM Manufacturer Whirlpool Voltage 120 V, 60 Hz Materials Plastic Housing, Metal Ice Tray Not Included Shut-Off Arm Application Select Whirlpool-Family Refrigerators Installation Notes ⚠️ Unplug Power and Shut Off Water Unplug the refrigerator and turn off the water supply before starting. Empty the ice bin and remove it from the freezer. Following your model's service guide, remove the screws holding the old ice maker to the freezer wall, then disconnect its wiring harness and pull the unit free. Transfer the shut-off arm from the old unit to the new one. If the harness on the new kit doesn't match your refrigerator, reuse the harness from the old ice maker. Mount the new ice maker in the same position, reconnect the harness, and secure the screws. Restore water and power, and allow several hours for the first batch of ice. Tools commonly needed are a nut driver, a flat-blade screwdriver, and a Phillips screwdriver. Frequently Asked Questions My refrigerator isn't making ice. Is this the part I need? It may be, if the water supply is on, the water filter is not clogged, and the freezer is cold enough. If the ice maker's contacts are corroded, it leaks, or it no longer cycles, replacing the whole unit is the simplest fix. Does the kit include the shut-off arm? No. Remove the shut-off arm from your original ice maker and fit it on the new one, or order the arm for your model. The wiring harness on the new ice maker doesn't match mine. What do I do? You can remove the harness from your existing ice maker and reuse it on the new unit. Is this a genuine Whirlpool part? Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent. Will this fit my refrigerator? It is listed for a very wide range of Whirlpool-family refrigerators. Match the number on your old ice maker against the Replaces list, or contact our support team with your model number and we'll confirm fit before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 280187 Washer Drain Pump Assembly The XPARTCO 280187 is an aftermarket replacement drain pump assembly for Whirlpool-built front-load washers sold under the Whirlpool, Kenmore, Kenmore Elite, Maytag, KitchenAid, and Amana names. The drain pump pushes water out of the tub through the drain hose at the end of the wash and rinse stages. When it clogs, wears out, or seizes, the washer can stop with water still in the drum, throw drain errors, stop before the spin cycle, leak, or make loud humming or grinding noises. This is a complete drain pump assembly, including the pump motor and housing, so it replaces the whole unit rather than just an internal part. The pump sits at the base of the washer behind the lower front panel, and the swap typically takes 15–30 minutes with common hand tools. Quick Answer The XPARTCO 280187 Drain Pump Assembly fixes a Whirlpool-built front-load washer that won't drain, leaves water in the drum, stops before spinning, leaks from the pump, or makes loud noise during draining. Complete pump motor and housing, aftermarket replacement. Classic symptom: the cycle stalls with water still in the tub, or you hear a loud hum or grind while it tries to drain. Common Problems This Part Fixes Washer won't drain, or water is left in the drum after the cycle Drain error codes or the cycle stopping before the spin Loud humming, grinding, or rattling while the washer drains Water leaking from the pump or its housing Pump motor seized or not running Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This drain pump assembly replaces the following part numbers: 280187, 1200164, 285998, 8181684, 8182819, 8182821, AH1485610, AP3953640, AWP39453, EA1485610, EAP1485610, PD00002352, PS1485610 These are Whirlpool's current and earlier numbers for this pump. If your old pump or parts diagram shows any of them, this is the matching replacement. Compatibility This pump is listed for select front-load washers from: Whirlpool, including Duet models such as WFW9400VE03, WFW9500TW03, and WFW9600TW02 Kenmore and Kenmore Elite, including 11042822200, 11042926200, 11045962400, and 11045966403 Maytag, including MHWE400WR00 and MHWE400WW0 KitchenAid, including KHWS02RWH0 Amana Note: The model list above is only a sample, since this pump fits many more models. Confirm fit by matching the number on your old pump or parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order. This pump is for front-load washers and is not intended for top-load machines. Key Features Aftermarket replacement drain pump assembly Complete unit with pump motor and housing Restores full draining so cycles finish and the washer can spin Cross-references to Whirlpool 280187, 285998, 8181684, 8182819, and 8182821 Fits select Whirlpool, Kenmore, Maytag, KitchenAid, and Amana front-load washers Typical installation 15–30 minutes with common hand tools Product Specifications Part Number XP280187 OEM Part Number 280187 Part Type Washer Drain Pump Assembly Condition Aftermarket Replacement Included Pump Motor and Housing Application Select Whirlpool, Kenmore, Kenmore Elite, Maytag, KitchenAid & Amana Front-Load Washers Installation Notes ⚠️ Unplug Power and Expect Water Unplug the washer and turn off the water supply before starting. Remove the lower front panel to reach the pump at the base of the washer, then drain any residual water into a shallow pan or with a wet/dry vacuum, using the drain hose or the small drain cap if your model has one. Disconnect the wiring harness from the pump, then loosen the clamps holding the hoses and pull the hoses off. Remove the pump's mounting screw and take out the old pump. Fit the new pump in the same position, reattach the hoses with the clamps (replace worn clamps if needed), and reconnect the wiring harness. Check that the pump and hose connections are secure, replace the front panel, restore power and water, and run a drain cycle while checking for leaks. Common tools include a nutdriver or Torx driver, screwdrivers, and pliers. Frequently Asked Questions My washer won't drain. Is this the part I need? A failed or clogged drain pump is one of the most common causes. Before replacing it, check the drain hose and the pump filter for a clog, such as a sock or coin. If the filter is clear but the pump hums, grinds, or doesn't run, replacing the pump should fix it. Does this include the pump motor? Yes. This is the complete assembly, with the pump motor and housing. My old pump is marked 285998, 8181684, 8182819, or 8182821. Will this work? Yes. All of those are earlier Whirlpool numbers for this pump, and 280187 is the current number. Will this fit my top-load washer? It is intended for front-load washers. Contact our support team with your model number if you're unsure, and we'll confirm before you order. Is this an OEM part? No. This is an XPARTCO aftermarket replacement built to match the Whirlpool 280187. If you prefer a genuine OEM pump, contact us. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

WH49X27616 Washer Genuine OEM Tub Cover   Cross Reference Information Part Number WH49X27616, WH44X10286, 4591241, AP6331330, PS12343566. Description Note: Newly designed cover includes 4 new rod and spring assemblies. The tub dampening straps and clips are no longer used.

Read more less

4681EA2001T Genuine OEM LG Washer Drain Pump Motor The 4681EA2001T is a genuine LG OEM drain pump motor for LG and Kenmore front-load washers, and also fits washer/dryer combo units. This motor is responsible for removing water from the washer at the end of the wash and spin cycles, expelling it through the drain hose so the machine can move on to the next stage of the cycle. This part is the motor only — you'll reuse your existing pump housing. It includes the pump impeller, which is not sold separately. Rated 120V-127V, 60Hz, 85W, 1.4A, with a flow rate of 45L per minute. Measures approximately 6.57" x 4.29" x 3.5". As of April 2025, the design of this drain pump motor changed to a gray housing, replacing the earlier black housing — this is expected and doesn't affect fit or function. Common failure causes include a worn or seized motor and general electrical wear. Symptoms of a failing drain pump motor include the washer not draining, unusual noise during the drain cycle, an OE error code, or leaking near the pump if the motor fails while still under load. It directly replaces 4681EA2001D, 4681EA2001U, 4681EA2001N, 4681EA1007G, 4681EA1007D, LP2001T, AP5328388, 2003273, 1468049, DP040-038, EAP3523278, EAP3579318, and 5214FR4006L. Quick Answer The 4681EA2001T Genuine OEM LG Washer Drain Pump Motor fixes LG and Kenmore front-load washers (and washer/dryer combos) that aren't draining, are making unusual noise during the drain cycle, or are showing an OE error code. 120V-127V, 60Hz, 85W, 1.4A, 45L/min. Replaces 4681EA2001D, 4681EA2001U, 4681EA2001N, 4681EA1007G, 4681EA1007D, LP2001T, AP5328388, 2003273, 1468049, DP040-038, EAP3523278, EAP3579318, 5214FR4006L. This is the motor only — reuse your existing pump housing when installing. As of April 2025, the new housing color is gray instead of the older black; this is a normal design change and not a compatibility issue. Common Problems This Part Fixes Washer not draining — standing water left in the tub after a cycle Unusual noise during the drain cycle OE error code displayed on the control panel Washer taking longer than normal to drain Leaking near the pump area Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer drain pump motor directly replaces the following OEM and cross-reference part numbers: 4681EA2001T, 4681EA1007G, 2003273, 4681EA1007D, 4681EA2001D, 4681EA2001N, 4681EA2001U, DP040-038, ALG51292, AH3579318, EA3579318, PD00001722, EAP3579318, AP5328388, PS3579318 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drain pump motor is compatible with select LG front-load washers, and also fits select Kenmore Elite washers built on the LG platform, and washer/dryer combo units, including model numbers such as WM2101HW, WM3270CW, WM3431HS, WM3770HVA, WM3001HWA, WM8000HVA, WM8000HWA, WM2550HRCA, WM2550HWCA, GCW1069CS, WM3550HWCA, WM3070HRA, WM4070HVA, WM3070HWA, WM2350HRC, WM3360HVCA, WM2350HWC, GCW1069QS, WM2650HRA, WM3360HRCA, WM3360HWCA, WM3150HVC, WM2650HWA, WM2655HVA, WM3885HCCA, WM3150HWC, WM3885HWCA, WM2250CW, WM2450HRA, WM3987HW, WM3470HVA, WM3470HWA, LSWF388HVS, WM3550HVCA, WM2455HG, WM2277HB, WM2487HRMA, and Kenmore 79641072310. Note: Always verify your full model number before ordering, since LG uses several different drain pump designs across its washer lineup. Contact our support team with your model number if you're unsure. Key Features Genuine LG OEM part — factory-specified motor design and impeller Pumps wastewater out of the tub through the drain hose Resolves "not draining," "unusual noise during drain," and "OE error code" symptoms caused by motor failure Includes pump impeller (not sold separately) Reuses your existing pump housing — motor only Rated 120V-127V, 60Hz, 85W, 1.4A, 45L/min flow rate Direct drop-in replacement matching the original mounting and connections Replaces 4681EA2001D, 4681EA2001U, 4681EA2001N, 4681EA1007G, 4681EA1007D, LP2001T, AP5328388, 2003273, 1468049, DP040-038, EAP3523278, EAP3579318, and 5214FR4006L Compatible with LG and Kenmore front-load washers and washer/dryer combo units Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number 4681EA2001T Part Type Washer Drain Pump Motor Condition Genuine OEM Brand LG Application Front-Load Washers, Washer/Dryer Combos Voltage 120V-127V Frequency 60 Hz Wattage 85 W Amperage 1.4 A Flow Rate 45 L/min Dimensions Approx. 6.57" x 4.29" x 3.5" Housing Not included — reuse existing pump housing Housing Color (as of April 2025) Gray (previously black) Repair Difficulty Medium — 30 to 60 minutes Quantity 1 drain pump motor Compatible Brands LG, Kenmore Installation Notes ⚠️ Unplug Washer And Shut Off Water Supply Before Starting — Have Towels Ready For Draining Water Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Lay towels down in front of the washer before starting, and have a pail ready. Remove the detergent drawer and check the drain filter (bottom lower left panel door) to confirm it's clean and the drain line isn't blocked before assuming the motor is at fault. Many customers find it easier to access the pump from underneath by carefully laying the washer on its back — be prepared for a significant amount of additional water to drain out onto the floor once you do this, so keep towels close by. With access to the pump, disconnect the electrical connector from the old motor and separate the motor from the pump housing, which you'll reuse with the new motor. Attach the new 4681EA2001T motor to your existing pump housing, transferring the impeller setup as needed. Reconnect the electrical connector fully. Stand the washer back upright, reinstall the detergent drawer, and reconnect the water supply and power. Test the new pump to confirm it drains properly before considering the repair complete. Tools needed: Phillips screwdriver, locking pliers, needle nose pliers, small flathead screwdriver, towels, work gloves. Frequently Asked Questions My washer shows an OE error code and isn't draining. Is this the part I need? Likely yes. An OE error code on LG washers is commonly tied to a drain issue, and a bad drain pump motor is one of the most frequent causes. Before replacing the motor, it's worth checking that the drain filter and coin trap (if your model has one) are clean and that the drain line itself isn't blocked, since those are simpler and cheaper things to rule out first. Does this come with the pump housing? No, this is the motor only, and it includes the pump impeller, which isn't sold separately. You'll reuse your existing pump housing during installation rather than replacing it as part of this repair. The new motor's housing looks a different color than I expected. Did I get the wrong part? No, this is expected. As of April 2025, LG changed the design of this drain pump motor to use a gray housing in place of the earlier black housing. This is a normal manufacturing update and doesn't affect fit or function. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original motor design, impeller, and electrical rating of the drain pump motor originally installed in your washer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO DC31-00187A Washer Drain Pump Motor The XPARTCO DC31-00187A is an aftermarket replacement washer drain pump motor compatible with select Samsung front-load and top-load washers in the WA4, WA5, WF2, WF3, WF4, and WF5 series, as well as select Kenmore washers built on the Samsung platform. The drain pump motor drives the impeller that expels water from the washer tub during the drain phase of each wash cycle. When the motor fails, the washer will not drain, will leave standing water in the tub, stop mid-cycle, or display error codes 5C, SE, SC, 5E, or SUDS. This motor-only assembly includes the pump motor, impeller, and replacement O-ring. Rated 120V, 60Hz, 80W, 1.1A (CL.F), with a 30-minute on / 30-minute off duty cycle. Dimensions: 4-1/4"L x 3"W x 4-1/4"H in gray/white/black plastic, metal, and rubber housing. The DC31-00187A is the motor component that installs into the existing pump housing on compatible Samsung washers — the pump housing (DC97-20621C assembly) is reused from the old pump, making this a motor-only swap rather than a complete pump replacement. It directly replaces DC31-00187D, DC31-00178A, DC31-00178D, PX3516-01, 03DC3100187A, 4958525, AP6977256, EAP9605762, PD00056512, PS9605762, and PS1274262. Installs in 20–30 minutes with basic hand tools. Quick Answer The XPARTCO DC31-00187A Washer Drain Pump Motor fixes Samsung front-load and top-load washers displaying error codes 5C, SE, SC, 5E, or SUDS, not draining, leaving standing water, or making loud noise during the drain cycle. Motor-only assembly — includes motor, impeller, and O-ring; installs into existing pump housing. 120V/60Hz/80W/1.1A/CL.F. 30 min on/30 min off. 4-1/4"L x 3"W x 4-1/4"H. Replaces DC31-00187D, DC31-00178A, DC31-00178D, PX3516-01, 4958525, AP6977256, PS9605762. Compatible with Samsung WA4/WA5/WF2/WF3/WF4/WF5 series. Common Problems This Part Fixes Washer not draining — standing water remaining in the tub after a cycle Error codes 5C, SE, SC, 5E, or SUDS displayed — drain fault detected Washer stopping mid-cycle due to a drain fault Loud humming during the drain phase — motor energized but impeller not turning Grinding or rattling during drain — damaged impeller or worn motor bearings Clothes excessively wet after a cycle — pump not fully removing water before spin Water draining very slowly — motor weakening below rated performance Replaces Part Numbers This drain pump motor directly replaces the following OEM and cross-reference part numbers: DC31-00187A, DC31-00178A, DC31-00178D, 03DC3100187A, ASM654116, EAP9605762, 4958525, AP6977256, PD00056512, PS12742622, PX3516-01. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drain pump motor is compatible with select Samsung front-load and top-load washers from the following series: Samsung top-load washers — WA4 series (WA40J3000AW, WA44A3205AW, WA45H7000AW, WA45M7050AW, WA45N3050AW, WA45T3200AW, WA45R6100AC and related models) Samsung top-load washers — WA5 series (WA50F9A6DSW, WA50M7450AW, WA50R5200AW, WA50R5400AV and related models) Samsung front-load washers — WF2 series (select models) Samsung front-load washers — WF3 series (select models) Samsung front-load washers — WF4 series (WF42H5000AW, WF42H5200AW, WF45M5500AW, WF45N5300AW, WF45R6100AC, WF45T6000AW, WF45A6400AV, WF45B6300AP and related models) Samsung front-load washers — WF5 series (select models) Kenmore / Sears washers (select Samsung-built models) Note: The DC31-00187A is the pump motor only — it installs into the existing pump housing (DC97-20621C assembly) which is retained from the old pump. The housing is not replaced. Check and clean the drain filter before replacing the pump motor — a clogged filter is a common cause of drain errors that doesn't require motor replacement. Key Features Pump motor only — includes motor, impeller, and O-ring; installs into the existing DC97-20621C pump housing retained from the old pump Drives the pump impeller to expel water from the washer tub during the drain cycle Resolves Samsung error codes 5C, SE, SC, 5E, and SUDS caused by drain pump motor failure Rated 120V, 60Hz, 80W, 1.1A (CL.F) — correct specifications for compatible Samsung washers Duty cycle: 30 minutes on / 30 minutes off Dimensions: 4-1/4"L x 3"W x 4-1/4"H Replaces DC31-00187D, DC31-00178A, DC31-00178D, PX3516-01, 4958525, AP6977256, PS9605762, and PS1274262 Compatible with Samsung WA4, WA5, WF2, WF3, WF4, WF5 series and Kenmore Samsung-built washers Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 20–30 minutes with basic hand tools Product Specifications Part Number XPDC31-00187A Also Covers DC31-00187D, DC31-00178A, DC31-00178D (variants) Part Type Washer Drain Pump Motor (Motor Only — reuses existing housing) Condition Aftermarket Replacement Application Samsung Front-Load and Top-Load Washers (WA4/WA5/WF2/WF3/WF4/WF5) Voltage 120V AC Frequency 60 Hz Wattage 80W Amperage 1.1A Duty Class CL.F Duty Cycle 30 minutes on / 30 minutes off Dimensions 4-1/4"L x 3"W x 4-1/4"H Color Gray / White / Black Material Plastic / Metal / Rubber Includes Pump motor, impeller, O-ring Error Codes Resolved 5C, SE, SC, 5E, SUDS Compatible Brands Samsung, Kenmore (Samsung-built) Installation Notes ⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Gloves Disconnect power and turn off the water supply before beginning. Wear work gloves — there are sharp edges inside the washer cabinet. For front-load models: remove the lower front access panel to expose the pump housing and filter. Drain residual water via the filter drain hose (have a shallow pan ready). Disconnect the wire harness from the motor. On most Samsung front-load models, the motor assembly twists out of the pump housing by rotating counter-clockwise — do not force it. Remove the old motor, note the O-ring position, and install the new O-ring from this kit onto the new DC31-00187A motor. Insert the new motor into the housing and twist clockwise to lock. Reconnect the wire harness. Reinstall the lower panel, restore power and water, and run a drain/spin cycle to confirm drainage. For top-load models: access through the lower front panel or by tilting the washer on its side depending on model. Tools needed: Phillips screwdriver, pliers, shallow pan, towels, work gloves. Frequently Asked Questions What is the difference between DC31-00187A and DC97-20621C? The DC31-00187A is the drain pump motor — the electrical component that drives the impeller. The DC97-20621C is the complete drain pump assembly, which includes the motor plus the outer pump housing, hose connection ports, and mounting hardware. When you order the DC31-00187A, you replace only the motor and reuse the existing DC97-20621C pump housing. When you order the DC97-20621C, you replace the entire assembly including the housing. Both resolve the same drain fault — the DC31-00187A is the more targeted repair when the housing is in good condition. What error codes indicate a drain pump motor failure? Error codes 5C, SE, SC, 5E, and SUDS on compatible Samsung washers all indicate a drain fault — the washer was unable to drain within the expected time. Before replacing the motor, clean the drain filter/coin trap at the lower front panel. A clogged filter is one of the most common causes of these error codes and does not require motor replacement. If the filter is clear and the codes persist, or if the pump is making loud noise or is completely silent during the drain phase, the motor needs replacement. What is the difference between DC31-00187A and DC31-00178A? These are cross-references for the same or very similar Samsung drain pump motor used across different Samsung washer generations. The DC31-00178A was used on earlier Samsung models and the DC31-00187A is the current version. Both are commonly listed as interchangeable replacements for each other in Samsung washer drain pump repair. The DC31-00187D and DC31-00178D are also variants of the same motor from different production runs. Should I clean the filter before replacing the pump motor? Yes — always check and clean the drain filter first. On Samsung front-load washers, the filter is accessible behind the lower front kick panel, typically on the right side — remove the cap slowly and drain water into a shallow pan first. Lint, coins, debris, and hair are very common causes of Samsung drain error codes that are completely resolved by cleaning the filter without any parts replacement. If the filter is clear and the error codes persist, the pump motor is the next component to replace. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications and performance of the original DC31-00187A drain pump motor. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine OEM GE Range Hood Part WB26X30785 Range Hood Genuine OEM Blower Motor Assembly A complete manufacturer-approved blower assembly designed to circulate air and help remove cooking grease, smoke, steam, and odors from the kitchen. Product Overview The GE WB26X30785 Range Hood Blower Motor Assembly is the main air-moving component inside compatible range hoods. When the hood fan is switched on, the motor turns the blower wheel to pull air through the filters and move smoke, steam, grease, and cooking odors through the venting system or recirculation path. This is a new Genuine OEM GE replacement part manufactured to the original equipment specifications. The assembly includes the blower motor and blower wheel, helping provide a more complete repair than replacing an individual motor component alone. Quick Answer WB26X30785 is a Genuine OEM GE range hood blower motor assembly that includes the motor and blower wheel. It replaces previous GE part number WB26X27202 and is used in select GE range hood models. Always verify your complete appliance model number before ordering. Common Problems This Part May Fix Range hood fan does not run Blower starts intermittently or stops during use Weak or reduced airflow Smoke and cooking odors are not being removed properly Grinding, rattling, humming, or scraping noise from the blower area Blower wheel is damaged, loose, or difficult to turn Replaces Part Numbers WB26X30785, WB26X27202, AGE22285, AP6880846, EAP12716502, PD00066165, PS12716502. WB26X30785 is the current manufacturer part number. Cross-reference numbers are included only to help identify the same component; order by your appliance model whenever possible. Compatibility Designed for select GE range hood models that specify part number WB26X30785 or the superseded number WB26X27202. Confirmed model examples include: JVX5300EJ1ES JVX5300SJ2SS JVX5360DJ2WW JVX5360EJ2ES JVX5360SJ2SS Important: This is a partial compatibility list. Range hood parts can look alike while using different mounting points, wiring connectors, motor ratings, or blower-wheel designs. Verify the complete model number from the hood identification label before purchasing. Key Features Genuine OEM GE replacement part Complete blower motor and blower wheel assembly Moves air through the range hood ventilation system Helps remove grease, smoke, steam, and cooking odors Manufactured for original fit and performance Direct replacement when WB26X30785 is specified Supersedes GE part number WB26X27202 Product Specifications Manufacturer Part Number WB26X30785 Brand GE Appliances Part Type Range Hood Blower Motor Assembly Condition New Quality Genuine OEM Application Range Hood / Vent Hood Assembly Includes Blower Motor and Blower Wheel Primary Function Circulates air through the hood ventilation system Package Quantity 1 Blower Motor Assembly Installation Notes Disconnect the range hood from electrical power or switch off the correct house circuit breaker before beginning service. Remove the grease filters and any covers needed to access the blower compartment. Photograph or label the wire connections before disconnecting the original motor assembly. Inspect the wiring harness, connector, capacitor, mounting hardware, and vent path for additional damage or blockage. Remove the old blower assembly and install WB26X30785 in the same position, using the original hardware when required. Confirm that the blower wheel turns freely and does not contact the housing before reassembling the hood. Restore power only after all covers, filters, and safety components are correctly reinstalled. Safety: Electrical diagnosis and installation should be performed by a qualified technician when you are not experienced with appliance repair. Do not work on the hood while power is connected. Frequently Asked Questions Is WB26X30785 a genuine GE part? Yes. WB26X30785 is a Genuine OEM GE Appliances replacement blower motor assembly. What is included with the assembly? The assembly includes the blower motor and blower wheel used to move air through the range hood. Which part number does WB26X30785 replace? WB26X30785 replaces the previous GE manufacturer part number WB26X27202. Will this part fit every GE range hood? No. It fits only select models. Compare your complete range hood model number and required manufacturer part number before ordering. Can this assembly fix a noisy range hood? It may correct noise caused by a worn motor, damaged blower wheel, loose shaft, or internal blower failure. First check the filters, ductwork, mounting hardware, and blower housing for obstructions or loose components. Shop With Confidence Purchase the correct Genuine OEM replacement part for dependable fit and performance. Verify your complete range hood model number before ordering, and contact our parts team when compatibility assistance is needed. Genuine OEM GE Fast U.S. Shipping Compatibility Support Secure Checkout

Read more less

WR60X10062 Refrigerator Air Damper Assembly Replaces Part Numbers:WR60X10062, 914163, AH304650, EA304650, AP3184950, PS304650.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO 4349 Door Latch Kit for Air Cleaner (4-Pack) Replaces Aprilaire 4349 The XPARTCO 4349 is an aftermarket replacement door latch kit compatible with Aprilaire Model 2200 and Model 2400 whole-house media air cleaners. Each cabinet uses a set of spring-loaded latches to hold the access door securely against the cabinet, keeping the seal tight so unfiltered air can't bypass the media filter. Over time these plastic latches crack, snap, or lose their spring tension from repeated opening and closing during filter changes, causing the door to sit loose, rattle, or fail to seal properly against the cabinet gasket. This kit includes 4 latches — enough to replace every latch on one cabinet door in a single order — manufactured to match the fit and mounting points of the original Aprilaire "new style door" latch design. The genuine Aprilaire 4349 was discontinued by the manufacturer in January 2022; this XPARTCO version is an aftermarket-manufactured equivalent built to keep these still-common air cleaner cabinets in service. Installs in under 10 minutes with no tools required. Quick Answer The XPARTCO 4349 Door Latch Kit fixes Aprilaire Model 2200 and Model 2400 whole-house air cleaners with a loose, rattling, or poorly sealing access door caused by cracked or worn-out latches. 4-pack — enough for a full door. Designed for the Aprilaire "new style door." No tools required for installation. The genuine Aprilaire 4349 is discontinued; this is an aftermarket-manufactured equivalent. Classic symptom: door won't stay shut, or air smell/bypass around the cabinet edge. Common Problems This Part Fixes Air cleaner access door won't stay closed or pops open on its own Door rattles or feels loose against the cabinet Visible cracked, broken, or missing latch tabs on the door Poor door seal allowing unfiltered air to bypass the media filter Musty or dusty smell around the cabinet edge from an incomplete seal Difficulty keeping the door aligned during filter changes Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This door latch kit directly replaces the following OEM part number: 4349 We were not able to confirm any additional cross-reference or alternate part numbers for this item at this time. If you have one, contact our support team before ordering and we will verify compatibility. Compatibility This latch kit is compatible with the following Aprilaire whole-house media air cleaners: Aprilaire Model 2200 whole-house air cleaner Aprilaire Model 2400 whole-house air cleaner Note: This kit is designed for the "new style" door used on later production Model 2200 and 2400 units. Earlier cabinets used a different door and latch design that this kit does not fit. Compare your existing latch and door style before ordering, or contact our support team with your model number if you're unsure. Key Features Replacement door latch kit for Aprilaire Model 2200 and Model 2400 whole-house air cleaners Resolves loose, rattling, or non-sealing access door caused by cracked or worn latches 4-pack — enough latches to fully replace one cabinet door Matches the fit and mounting points of the original Aprilaire "new style door" latch No tools required — snap-fit installation Helps maintain a proper door seal so unfiltered air can't bypass the media filter Aftermarket replacement built to OEM-equivalent quality standards for a now-discontinued genuine part Product Specifications Part Number 4349 OEM Part Number Aprilaire 4349 (discontinued) Part Type Air Cleaner Cabinet Door Latch Kit Condition Aftermarket Replacement Quantity 4-Pack (1 full door set) Door Style New Style Door Application Aprilaire Model 2200 & 2400 Whole-House Air Cleaners Installation Snap-fit, no tools required Installation Notes ℹ️ No Tools Required Open the air cleaner cabinet door fully. Locate each damaged or missing latch along the edge of the door. Grip the old latch and pull firmly to release it from its mounting slot — if it's already broken, remove any remaining fragments from the slot. Line up the new latch tab with the mounting slot and press firmly until it snaps into place. Repeat for each latch being replaced. Close the door and check that it seats flush and securely against the cabinet gasket with no gaps. If the door still doesn't seal evenly after replacing all latches, check the door hinge alignment and the condition of the cabinet gasket itself. Frequently Asked Questions Is the genuine Aprilaire 4349 still available? No — Aprilaire discontinued the genuine 4349 latch kit in January 2022. This XPARTCO version is an aftermarket-manufactured equivalent designed to keep still-common Model 2200 and 2400 cabinets in service now that the original part is no longer produced. How many latches come in this kit, and how many do I need? This kit includes 4 latches, which is a full set for one cabinet door. Most installers replace all four at once even if only one or two have failed, since the remaining originals are usually close behind in wear. Will this fit my Aprilaire air cleaner? This kit is designed for the "new style door" used on Model 2200 and 2400 units. Earlier cabinets used a different door and latch design that this kit will not fit. Compare your existing latch shape to the product photos, or contact our support team with your model number to confirm before ordering. Do I need any tools to install this? No. The latches are a snap-fit design — pull the old one out of its mounting slot and press the new one in firmly until it clicks into place. No screwdrivers or other tools are needed. Shop With Confidence A U.S.-based appliance and HVAC parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance and air-quality equipment brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine OEM 280187 Washer Drain Pump Assembly The 280187 is a genuine OEM drain pump assembly from Whirlpool for Whirlpool-built front-load washers sold under the Whirlpool, Kenmore, Kenmore Elite, Maytag, KitchenAid, and Amana names. The drain pump pushes water out of the tub through the drain hose at the end of the wash and rinse stages. When it clogs, wears out, or seizes, the washer can stop with water still in the drum, throw drain errors, stop before the spin cycle, leak, or make loud humming or grinding noises. This is a complete drain pump assembly, including the pump motor and housing, so it replaces the whole unit rather than just an internal part. As a genuine OEM part, not an aftermarket equivalent, it matches the original factory fit and specification. The pump sits at the base of the washer behind the lower front panel, and the swap typically takes 15–30 minutes with common hand tools. Quick Answer The Genuine OEM 280187 Drain Pump Assembly fixes a Whirlpool-built front-load washer that won't drain, leaves water in the drum, stops before spinning, leaks from the pump, or makes loud noise during draining. Complete pump motor and housing, genuine OEM. Classic symptom: the cycle stalls with water still in the tub, or you hear a loud hum or grind while it tries to drain. Common Problems This Part Fixes Washer won't drain, or water is left in the drum after the cycle Drain error codes or the cycle stopping before the spin Loud humming, grinding, or rattling while the washer drains Water leaking from the pump or its housing Pump motor seized or not running Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This drain pump assembly replaces the following part numbers: 280187 replaces 1200164, 285998, 8181684, 8182819, 8182821, AH1485610, AP3953640, AWP39453, EA1485610, EAP1485610, PD00002352, PS1485610 These are Whirlpool's current and earlier numbers for this pump. If your old pump or parts diagram shows any of them, this is the matching replacement. Compatibility This pump is listed for select front-load washers from: Whirlpool, including Duet models such as WFW9400VE03, WFW9500TW03, and WFW9600TW02 Kenmore and Kenmore Elite, including 11042822200, 11042926200, 11045962400, and 11045966403 Maytag, including MHWE400WR00 and MHWE400WW0 KitchenAid, including KHWS02RWH0 Amana Note: The model list above is only a sample, since this pump fits many more models. Confirm fit by matching the number on your old pump or parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order. This pump is for front-load washers and is not intended for top-load machines. Key Features Genuine OEM Whirlpool drain pump assembly, not an aftermarket equivalent Complete unit with pump motor and housing Restores full draining so cycles finish and the washer can spin Cross-references to Whirlpool 280187, 285998, 8181684, 8182819, and 8182821 Fits select Whirlpool, Kenmore, Maytag, KitchenAid, and Amana front-load washers Typical installation 15–30 minutes with common hand tools Product Specifications Part Number 280187 OEM Part Number 280187 Part Type Washer Drain Pump Assembly Condition Genuine OEM Included Pump Motor and Housing Application Select Whirlpool, Kenmore, Kenmore Elite, Maytag, KitchenAid & Amana Front-Load Washers Installation Notes ⚠️ Unplug Power and Expect Water Unplug the washer and turn off the water supply before starting. Remove the lower front panel to reach the pump at the base of the washer, then drain any residual water into a shallow pan or with a wet/dry vacuum, using the drain hose or the small drain cap if your model has one. Disconnect the wiring harness from the pump, then loosen the clamps holding the hoses and pull the hoses off. Remove the pump's mounting screw and take out the old pump. Fit the new pump in the same position, reattach the hoses with the clamps (replace worn clamps if needed), and reconnect the wiring harness. Check that the pump and hose connections are secure, replace the front panel, restore power and water, and run a drain cycle while checking for leaks. Common tools include a nutdriver or Torx driver, screwdrivers, and pliers. Frequently Asked Questions My washer won't drain. Is this the part I need? A failed or clogged drain pump is one of the most common causes. Before replacing it, check the drain hose and the pump filter for a clog, such as a sock or coin. If the filter is clear but the pump hums, grinds, or doesn't run, replacing the pump should fix it. Does this include the pump motor? Yes. This is the complete assembly, with the pump motor and housing. My old pump is marked 285998, 8181684, 8182819, or 8182821. Will this work? Yes. All of those are earlier Whirlpool numbers for this pump, and 280187 is the current number. Will this fit my top-load washer? It is intended for front-load washers. Contact our support team with your model number if you're unsure, and we'll confirm before you order. Is this an OEM part? Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent, so it matches the original factory fit and specification. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

12238200001084 Genuine OEM Midea Dryer Bearing House Assembly (Drum Rear Bearing) The 12238200001084 is a Genuine OEM Midea replacement bearing house assembly compatible with select Midea, Criterion, and Insignia electric and gas dryers, including the CDE41N1AW series. The bearing house assembly is mounted at the rear of the drum and houses the bearing that the rear drum shaft rotates within, supporting the back of the drum and allowing it to spin smoothly. Unlike front-mounted slide rollers used on some dryer platforms, this Midea design uses a rear bearing housing assembly to carry the load at the back of the drum. When the bearing house assembly wears out — typically from age, lack of lubrication, or accumulated lint and debris — the drum no longer spins smoothly on its rear support, resulting in grinding, rumbling, or squealing noise, increased drum drag, and in advanced cases, visible wobble or binding of the drum during rotation. As a Genuine OEM part manufactured by Midea to factory specifications, the 12238200001084 is a complete bearing house assembly designed as a direct replacement for the original equipment component. Installs in 45–60 minutes with basic hand tools, as drum removal is required. Quick Answer The 12238200001084 Genuine OEM Midea Dryer Bearing House Assembly fixes Midea, Criterion, and Insignia dryers with grinding, rumbling, or squealing noise from the rear of the drum, increased drum drag, or visible drum wobble. Mounted at the rear of the drum — houses the bearing the rear drum shaft rotates within. Genuine OEM. Compatible with Midea CDE41N1AW and related Midea electric dryer platform models. Requires drum removal to access — a more involved repair than a front roller swap. Common Problems This Part Fixes Loud grinding or rumbling noise from the rear of the drum during the drying cycle Squealing or squeaking noise as the drum rotates — worn or dry bearing surface Increased drag or resistance felt when manually rotating the drum by hand Drum wobbling or binding during rotation — worn bearing no longer providing stable support Excessive vibration during the drying cycle Visible wear, cracking, or lint/debris buildup in the bearing house area Drum scraping against the rear bulkhead due to lost bearing support Replaces Part Numbers This bearing house assembly directly replaces the following part number: 12238200001084, AP7154967, PS18167713 This is the Midea manufacturer part number used across the compatible Midea, Criterion, and Insignia dryer platform. Contact our support team with your model number if you need confirmation before ordering. Compatibility This bearing house assembly is compatible with select Midea, Criterion, and Insignia dryers, including: Midea CDE41N1AW electric dryer Midea MLE series electric dryers (select models — same drum/bearing platform) Criterion electric dryers built on the Midea platform (select models) Insignia electric dryers built on the Midea platform (select models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Genuine OEM part manufactured by Midea to factory specifications — guaranteed fit and performance Complete bearing house assembly — supports the rear of the drum and allows smooth, quiet rotation Houses the bearing that the rear drum shaft rotates within — a sealed-style design intended to resist lint intrusion Direct replacement for the original equipment bearing house assembly Compatible with Midea CDE41N1AW and related Midea, Criterion, and Insignia electric dryer platform models Installs in 45–60 minutes with basic hand tools (drum removal required) Product Specifications Part Number 12238200001084 Part Type Dryer Bearing House Assembly (Drum Rear Bearing) Condition Genuine OEM Application Electric Dryers (Midea platform) Location Rear of drum — houses rear drum shaft bearing Compatible Brands Midea, Criterion, Insignia Installation Notes ⚠️ Unplug Dryer Before Starting — Wear Work Gloves Disconnect power before beginning. Wear work gloves — there are sharp sheet metal edges inside the dryer cabinet. Remove the lint filter housing screws, release the top panel locking clips with a putty knife, and lift the top panel. Remove the front panel to access the drum. Take a photo of the belt routing before disconnecting the drive belt from the idler pulley. Carefully lift the drum out of the cabinet and set it aside on a padded surface. Locate the bearing house assembly mounted at the rear bulkhead where the drum's rear shaft was seated. Remove the mounting screws or clips securing the old bearing house assembly and pull it free. Clean any accumulated lint or debris from the mounting area before installing the new part. Install the new 12238200001084 bearing house assembly in the same position and secure the mounting hardware. Reinstall the drum, re-route and reconnect the drive belt, and reassemble the front and top panels. Restore power and run a test cycle to confirm the drum rotates smoothly and quietly. Tools needed: Phillips screwdriver, putty knife, work gloves. Frequently Asked Questions What does the bearing house assembly do? The bearing house assembly is mounted at the rear bulkhead of the dryer and houses the bearing that the rear drum shaft rotates within. It supports the back of the drum as it spins, allowing smooth, low-friction rotation throughout the drying cycle. Unlike dryer platforms that use front-mounted slide rollers or felt seals for drum support, this Midea design relies on a dedicated rear bearing housing to carry the structural load at the back of the drum. As the bearing wears, friction increases, leading to noise, drag, and eventually wobble or binding if left unaddressed. How do I know if the bearing house assembly has failed versus another component? A grinding, rumbling, or squealing noise specifically tied to drum rotation — rather than the blower motor or idler pulley — and noise that changes pitch as the drum speeds up or slows down often points to the rear bearing. With the dryer unplugged and the drum exposed (front panel removed), try rotating the drum by hand: if you feel noticeable resistance, grinding, or grittiness compared to a smooth, free rotation, the bearing house assembly has likely worn out and needs replacement. Why does this repair require removing the drum? The bearing house assembly is mounted at the rear bulkhead behind the drum, supporting the drum's rear shaft from the inside. There is no way to access this component without first removing the front panel and lifting the drum out of the cabinet. This makes it a more involved repair than swapping a front-accessible part like a belt or idler pulley, but it follows the same general dryer disassembly procedure used for accessing other internal drum components. Should I inspect other components while the drum is out? Yes — since the drum must already be removed to access the bearing house assembly, this is an excellent opportunity to inspect the drive belt, idler pulley, and any felt seals or gaskets around the drum opening for wear. Components in this drum drive system tend to wear together, and addressing multiple worn parts in a single repair session helps avoid a near-term repeat teardown. Is this a Genuine OEM or aftermarket part? This is a Genuine OEM part manufactured by Midea to factory specifications. It is the exact same bearing house assembly installed in compatible Midea, Criterion, and Insignia electric dryers from the factory — guaranteed fit, materials, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 137221600 Washer Drain Pump The XPARTCO 137221600 is an aftermarket replacement washer drain pump compatible with a wide range of Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse front-load washers — including popular Affinity series and washer-dryer combo models. The drain pump is mounted at the base of the washer and is responsible for evacuating the wash and rinse water from the tub through the drain hose at the end of each cycle. When the drain pump fails, the washer can't drain — leaving clothes soaking wet, water pooling in the tub, and the wash cycle unable to advance to spin. Common failure symptoms include humming without pumping (blocked or seized impeller), leaks from the pump housing, loud grinding or clicking noises, and complete pump silence when a drain cycle should be running. Rated 120V AC, 60Hz, 85W, 1.25A. Based on the Askol M65 design, with a firmly attached red flapper to prevent drain backflow into the tub. Constructed from strong, durable plastic to resist cracking and leaking through many years of cycling. Package includes the drain pump, mounting base, and mounting screw. This part directly replaces 137108100, 137151800, 137151800KITK, 131724000, 134051200, 134740500, 134740800, 2754548, ER137108100, TJ137108100, EAP7783938, LP1600, BPX401-72J, AP5684706, and PS7783938. Important: before installing the new pump, clean any lint or debris from the rubber boot, verify the drain hose is clear and properly fastened, and check the pump filter for blockage — installing a new pump on a system with the underlying blockage will not resolve the drainage problem. Installs in 30–60 minutes with basic hand tools. Quick Answer The XPARTCO 137221600 Washer Drain Pump fixes Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse front-load washers that won't drain, leave clothes soaking wet, are noisy or humming during the drain cycle, or display an E11 error code. 120V AC, 60Hz, 85W, 1.25A. Askol M65 design with red backflow flapper. Kit includes pump + mounting base + screw. Replaces 137108100, 137151800, 137151800KITK, 131724000, 134051200, 134740500, 134740800, 2754548, ER137108100, TJ137108100, EAP7783938, LP1600, BPX401-72J, AP5684706, PS7783938. Common Problems This Part Fixes Washer not draining — pump failed to remove water at the end of the wash or rinse cycle Clothes left soaking wet at the end of the cycle — no drain, so no spin can start Water leaking from the bottom of the washer — cracked pump housing or failed seal Loud humming noise but no water flowing — pump motor running against a seized impeller or blockage Grinding, clicking, or unusual noises during the drain cycle E11 error code displayed on the control panel (drain fault) Washer pumps but won't spin — drain cycle can't complete, blocking spin Cycles taking much longer than normal as the washer tries to drain Pump silent during drain — motor windings open or electrical fault Impeller broken, cracked, or missing pieces after opening the pump Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This drain pump directly replaces the following OEM and cross-reference part numbers: 137221600, 131724000, 134051200, 134740500, 137108100, 137151800, 137151800KITK, 2754548, TJ137108100, ER137108100, PD00000118, EAP7783938, BPX401-72J, AFR14249, AP5684706, PS7783938, Also replaces GE WH23X10041, 2119312, WH23X10009, WH23X10017, WH23X10031, WH23X10034, AH3502779, EA3502779, AP5324214, PS3502779. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drain pump is compatible with select front-load washers and washer-dryer combos from the following brands: Frigidaire front-load washers — Affinity series (FAFW3001LW3, FAFW3801LW3 and related), FEX831FS2/FS4, FTF2140ES1, FWS445RFS2, FWX445RFS3 series Frigidaire front-load washers — ATF6000ES1, ATF8000FS1, ATFB6700FS0 series Frigidaire front-load washers — GLTF2940ES3, GLTF2940FS1 and related GLTF series Frigidaire washer-dryer combos — CWS3600AS1 and related Electrolux front-load washers — select models Crosley front-load washers — select models Gibson front-load washers — select models Kelvinator front-load washers — select models Kenmore / Sears front-load washers — select Frigidaire-built models (41744052400, 41744052401, 41744052500, 41744082500, 41748102700, 41748106700, 41748116700, 41790812995 and related 417-series) Tappan front-load washers — select models Westinghouse front-load washers — select models Note: The redesigned 137221600 may look slightly different from your original (e.g., white or gray housing vs. original black), but functions identically. Ensure proper orientation and flapper alignment during installation. Always verify your appliance model number before ordering. Key Features Aftermarket replacement built to OEM-equivalent quality standards Drain pump — removes water from the washer tub through the drain hose at the end of the wash and rinse cycles Resolves "won't drain," "won't spin," "wet clothes," "E11 error," and "humming pump" symptoms 120V AC, 60Hz, 85W, 1.25A — correct electrical specifications for compatible Frigidaire-platform washers Askol M65 design with red backflow flapper to prevent water from flowing back into the tub Strong, durable plastic construction resistant to cracking and leaking Kit includes: 1x drain pump, 1x mounting base, 1x mounting screw Replaces 15+ OEM and cross-reference part numbers including 137108100, 137151800, 131724000, 134051200, 134740500, 134740800, AP5684706, and PS7783938 Compatible with Frigidaire (Affinity, FEX, FTF, FWS, FWX, ATF, ATFB, GLTF, CWS series), Electrolux, Crosley, Gibson, Kelvinator, Kenmore (417-series), Tappan, and Westinghouse front-load washers and washer-dryer combos DIY repair — installs in 30–60 minutes with basic hand tools Product Specifications Part Number XP137221600 Part Type Washer Drain Pump Condition Aftermarket Replacement Application Front-Load Washers and Washer-Dryer Combos (Frigidaire/Electrolux platform) Voltage 120V AC Frequency 60 Hz Wattage 85W Amperage 1.25A Design Askol M65 with red backflow flapper Material Durable plastic Includes 1x Drain Pump, 1x Mounting Base, 1x Mounting Screw Error Codes Resolved E11 (drain fault) Compatible Brands Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Kenmore, Tappan, Westinghouse Installation Notes ⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Work Gloves — Check for Blockage First Disconnect power at the outlet or breaker and shut off both water supplies at the wall before beginning. Wear work gloves to protect your hands — pump components can have sharp edges. Have towels ready — residual water remains in the pump housing and hoses. Important: before replacing the pump, check for the underlying cause of the drain problem. Inspect the pump filter (accessible on many models via the lower front kick panel), the drain hose for kinks, and the rubber boot at the bottom of the tub for lint, coins, buttons, or other debris — installing a new pump on a system with an unresolved blockage will not fix the drain problem. Remove the appropriate access panel (typically the rear or front lower kick panel — model-dependent) to expose the pump. Photograph the wire harness and hose connections before disconnecting. Disconnect the electrical wire connectors from the pump motor. Squeeze the hose clamps with pliers and slide them back to release the tub-to-pump hose and the pump-to-drain-hose from the pump. Remove the 2 mounting screws holding the pump to its base and lift the old pump out. Clean any residual debris from the rubber boot, hoses, and pump filter area. Install the new 137221600 pump using the included mounting base and screw. Reconnect the hoses with the clamps, orient the red backflow flapper correctly, and reconnect the electrical connectors. Reinstall the access panel, restore water and power, and run a rinse cycle to test drainage and check for leaks at all connections. Tools needed: Phillips screwdriver, needle-nose pliers, channel-lock pliers, small flathead screwdriver, towel, work gloves. Frequently Asked Questions My washer won't drain — is it always the pump? Not always. Before replacing the pump, check for these common causes: 1) Clogged pump filter — most Frigidaire front-load washers have a filter accessible via the lower front kick panel; coins, buttons, lint, and small items can block it. 2) Kinked or clogged drain hose — inspect the entire drain hose from the pump to the wall standpipe or sink. 3) Blocked rubber boot — small items can get stuck between the tub and the pump inlet. 4) Failed lid lock/door switch — if the washer doesn't detect a locked door, it won't run the drain cycle. If all of these check out and the pump still isn't draining (or is humming without moving water), the pump has failed and this is the correct repair. What is the E11 error code on my Frigidaire washer? E11 on Frigidaire and Electrolux front-load washers indicates a drain fault — the control board is not detecting successful drainage within the expected time. Common causes are a failed drain pump, a clogged pump filter, a kinked or clogged drain hose, or debris blocking the impeller. If you've verified the filter and hose are clear but the code persists, replacing the 137221600 drain pump typically resolves it. If the code returns after replacement, check the wire harness between the pump and the control board. Does the pump come with everything I need for installation? Yes — the 137221600 (OE) package includes the drain pump itself, a mounting base, and a mounting screw. This is everything you need for the pump replacement itself. However, you should reuse the original hose clamps and hoses from your old pump (they should still be in good condition). If you find that the rubber boot at the base of the tub is cracked, hardened, or torn during the repair, that's a separate part that would need to be ordered — inspect it before completing the reinstallation. The new pump looks different from my old one — is it the right part? Very likely, yes. The 137221600 has been through several revisions over its production history — some housings are black, others white or gray, and the exact shape can vary slightly across production runs. As long as the mounting bolt pattern, hose inlet/outlet sizes, and electrical connector are the same, and the specs match (120V, 60Hz, 85W, Askol M65 design), the pump will function identically to your original. During installation, focus on correct orientation and flapper alignment — the flapper (red) must be positioned so it opens outward toward the drain hose direction to prevent backflow. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Frigidaire/Electrolux OEM part, but is manufactured to match the electrical specifications (120V AC, 60Hz, 85W, 1.25A), Askol M65 design, red backflow flapper, dimensions, and drain pump function of the original 137221600 used in compatible Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse front-load washers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO W10276397 Washer Drain Pump Replaces WPW10276397 The XPARTCO W10276397 is an aftermarket replacement washer drain pump and motor assembly compatible with a wide range of Whirlpool-family top-load washers including Whirlpool Cabrio, Maytag Centennial, Amana, Kenmore, Roper, Crosley, and Inglis. The drain pump removes water from the washer tub during the drain portion of each wash cycle. When the pump fails, the washer will not drain, will leave standing water in the tub, display error code F9E1, stop mid-cycle, or produce unusual humming or grinding noises during the drain phase. This complete drain pump and motor assembly uses a Hanyu B40-3A motor (also marked 91PS3132) and includes the integrated impeller — the impeller is not sold separately. It directly replaces WPW10276397, W10276397, WPW10276397VP, 1874334, B40-3A, LP397, AP6018417, PS11751719, and several additional cross-reference numbers. Before ordering, confirm that the drain hose and any coin trap or filter are clear — a blocked hose or clogged filter can mimic pump failure symptoms. Installs in 20–30 minutes with basic hand tools. Quick Answer The XPARTCO W10276397 Washer Drain Pump fixes Whirlpool Cabrio and Maytag Centennial top-load washers that won't drain, leave standing water, display error code F9E1, or make humming/grinding noises during the drain cycle. Complete pump and motor assembly with integrated impeller. Motor: Hanyu B40-3A / 91PS3132. Replaces WPW10276397, 1874334, B40-3A, LP397, AP6018417, PS11751719. Compatible with Whirlpool Cabrio, Maytag Centennial/MVWC/MVWX, Amana, Kenmore, Roper, Crosley, and Inglis top-load washers. Common Problems This Part Fixes Washer not draining — standing water remaining in the tub after a cycle Error code F9E1 displayed — drain pump fault or slow drain detected Washer stopping mid-cycle due to a drain fault Loud humming during the drain phase — motor running but impeller not pumping Grinding or rattling noise during drain — physical damage to impeller or pump housing Water draining very slowly — worn pump motor below rated flow Water leaking from the drain pump area Replaces Part Numbers This drain pump directly replaces the following OEM and cross-reference part numbers: WPW10276397, W10276397, 1874334, AP6018417, AWP50231 EAP11751719 FIX11751719, OEM24073670, PD00003595, PS11751719, WPW10276397VP If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drain pump is compatible with select top-load washers from the following brands and series: Whirlpool top-load washers — Cabrio series (WTW4800, WTW4810, WTW4850, WTW4900, WTW5000, WTW5200, WTW5300, WTW5500, WTW5600, WTW5640, WTW5700 and related models) Maytag top-load washers — Centennial series (MVWC200, MVWC215, MVWC300, MVWC400, MVWC415, MVWC416, MVWC425, MVWC465 and related models) Maytag top-load washers — MVWX series (MVWX500, MVWX550, MVWX600, MVWX700 and related models) Amana top-load washers (ATW, NTW series and related models) Kenmore / Sears top-load washers — 110 series (Whirlpool-built Cabrio-platform models) Roper top-load washers (RTW series) Crosley top-load washers (CAE series) Inglis top-load washers (select models) Note: This pump is for top-load washers only. Always verify your exact model number before ordering. Check and clear the drain hose and any coin trap before replacing the pump — a blocked hose can produce the same symptoms as a failed pump. Key Features Removes water from the tub during the drain and spin cycles for proper washer operation Complete pump and motor assembly — includes integrated impeller (impeller not sold separately) Motor: Hanyu B40-3A / 91PS3132 — matched to original pump specifications Resolves error code F9E1 (drain pump fault / slow drain) on compatible Whirlpool and Maytag top-load washers Replaces WPW10276397, W10276397, 1874334, B40-3A, LP397, and AP6018417 Compatible with Whirlpool Cabrio, Maytag Centennial/MVWX, Amana, Kenmore, Roper, Crosley, and Inglis top-load washers Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 20–30 minutes with basic hand tools Product Specifications Part Number W10276397 OEM Part Number WPW10276397 Part Type Washer Drain Pump and Motor Assembly Condition Aftermarket Replacement Application Top-Load Washers (Cabrio, Centennial, and related platforms) Motor Hanyu B40-3A / 91PS3132 Includes Pump motor and integrated impeller assembly Error Code Resolved F9E1 (drain pump fault / slow drain) Compatible Brands Whirlpool, Maytag, Amana, Kenmore, Roper, Crosley, Inglis Installation Notes ⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning. Place towels and a shallow pan near the pump access area to catch residual water. The drain pump is located beneath the washer tub on Cabrio and Centennial models — access it by removing the front lower panel or by tilting the washer back and working from underneath. Disconnect the drain hose clamp and hose from the pump, then disconnect the wire harness connector. Unscrew the pump mounting screws and remove the old pump. Before installing the new pump, verify the drain hose and any coin trap or filter are completely clear of debris — a blocked hose or trap will cause the new pump to fail again. Install the new W10276397 pump in the same position, reconnect the hose and wire harness, and secure the mounting screws. Restore power and water and run a drain or spin cycle to confirm drainage and check for leaks. Tools needed: Phillips screwdriver, pliers, shallow pan, towels. Frequently Asked Questions What does error code F9E1 mean on Whirlpool Cabrio and Maytag Centennial washers? F9E1 indicates a drain fault — the washer was unable to drain within the expected time during the cycle. It can be caused by a clogged drain hose, a blocked coin trap or filter, a kinked drain hose, or a failed drain pump motor. Always check and clear the drain hose and filter before replacing the pump — a blockage is often the cause and clearing it resolves the error without needing a new pump. If the hose and filter are clear and the error persists, the pump motor has likely failed. What is the difference between W10276397 and WPW10276397? These are the same drain pump assembly. WPW10276397 is the updated Whirlpool OEM part number that superseded the original W10276397. The 1874334 and B40-3A are also cross-references for this same pump. This aftermarket replacement is compatible with all of these numbers. My washer hums but won't drain — is it the pump? A humming sound during the drain cycle without water being expelled usually means the pump motor is receiving power and running, but the impeller is not turning — either because it is jammed with debris or because the impeller shaft has broken. First check for and remove any foreign objects (coins, lint, small clothing items) from the pump area. If the impeller is clear and the pump still hums without draining, the motor or impeller is mechanically failed and the pump assembly needs replacement. Does this pump fit the Whirlpool Cabrio and Maytag Bravos washers? The W10276397 is compatible with Whirlpool Cabrio and Maytag Centennial top-load washers on the VM transmission platform. Maytag Bravos XL and Bravos X models may also be compatible depending on the specific model number — verify your exact model before ordering. Contact our support team if you need confirmation for a specific Bravos model. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured with a Hanyu B40-3A motor to match the specifications and performance of the original WPW10276397 drain pump assembly. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less