W10515058 Refrigerator LED Light & Cover Replaces WPW10515058
The XPARTCO W10515058 is an aftermarket replacement LED light and flat lens cover assembly for Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators. This is the main light driver in a three-board lighting system used on many of these refrigerators — it not only illuminates its own location, but also supplies power to the other LED lights in both the refrigerator and freezer compartments. The companion boards in this same system use a tapered lens cover, sold separately as our W10515057 listing.
Measuring approximately 5" x 3", rated 120V, with a durable plastic lens and integrated LED circuit. Because this board supplies power to lights beyond its own location, a failure here can affect lighting throughout more of the refrigerator than just the spot where this assembly is mounted. Symptoms of a failing assembly include this light being dim, flickering, or not turning on, and in some cases, other lights elsewhere in the refrigerator or freezer being affected as well, since they depend on this board for power. It directly replaces WPW10515058, W10465957, W10522611, AP6022534, PS11755867, and 3021142.
Quick Answer
The W10515058 Refrigerator LED Light & Cover fixes Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators with a dim, flickering, or non-working interior light — sometimes affecting lighting elsewhere in the fridge or freezer too, since this board supplies power to those lights as well. Flat lens cover, ~5" x 3", 120V. Replaces WPW10515058, W10465957, W10522611, AP6022534, PS11755867, 3021142. This is the flat-lens board that powers both the refrigerator and freezer lights — a different part from our W10515057 listing, which uses a tapered lens and is typically needed in pairs (2 tapered + 1 flat per refrigerator).
Common Problems This Part Fixes
Interior light dim or flickering
Interior light not turning on at all
Other lights elsewhere in the refrigerator or freezer also affected
All refrigerator lights strobing together when a door opens
Reduced visibility inside the refrigerator or freezer compartment
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator LED light and cover assembly directly replaces the following OEM and cross-reference part numbers:
WPW10515058, W10515058, W10465957, W10522611, AP6022534, AWP993990, EAP11755867, PD00030078, PS11755867
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This LED light and cover assembly is compatible with select Whirlpool refrigerators, and also fits select Kenmore, Maytag, KitchenAid, and Ikea refrigerators built on the Whirlpool platform, including model numbers such as:
WRS325FDAM02, WRS325FDAM04, WRS322FDAM04, WRS322FDAW04, WRS325FDAB02, WRS325FDAB06, WRS325FNAM, WRS335FDDM01
MSB27C2XAM00, MSB27C2XAW00, MSF22D4XAB00, MSF22D4XAB01, MSF22D4XAM00, MSF22D4XAM01, MSF22D4XAW00, MSF22D4XAW01
MSF25D4MDM00, MSF25D4MDM01, MSF25D4MDM02, MSF25D4XAW00, MSF25D4XAB00, MSF25D4XAM00
MSF21D4MDH00, MSF21D4MDH01, MSF21D4MDE00, MSF21D4MDE01, MSF21D4MDE02, MSF21D4MDM00, MSF21D4MDM01
MSF25D4MDE00, MSF25D4MDE01, MSF25D4MDE02, MSF25D4MDE03, MSF25D4MDH00, MSF25D4MDH01, MSF25D4MDH02, 8MSF25N4BW00, 8MSF25N4BW02
Kenmore 106.51132210, 106.51133213, 10651729410, 10641129210, 10641129211, 10641129212, 10641129213, 10651129210, 10651129211, 10651129212, 10651135610
Note — flat lens, not tapered, and typically needed alongside W10515057: This board uses a flat lens cover and serves as the light driver supplying power to the refrigerator and freezer lights. The companion boards in this same lighting system use a tapered lens cover, sold separately as our W10515057 listing — most of these refrigerators use 2 tapered-lens boards and 1 flat-lens board across the full lighting system. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which board your refrigerator needs.
Key Features
Aftermarket replacement LED light and flat lens cover assembly
Main light driver — supplies power to LED lights in both the refrigerator and freezer compartments
Resolves "dim or flickering light," "won't turn on," and "lights elsewhere also affected" symptoms
Approximately 5" x 3"
Rated 120V
Durable plastic lens with integrated LED circuit
Direct drop-in replacement matching the original mounting
Replaces WPW10515058, W10465957, W10522611, AP6022534, PS11755867, and 3021142
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
W10515058
OEM Part Number
WPW10515058
Part Type
Refrigerator LED Light & Flat Lens Cover Assembly
Condition
Aftermarket Replacement
Function
Illuminates its location and supplies power to refrigerator and freezer LED lights
Lens Type
Flat
Dimensions
Approx. 5" x 3"
Voltage
120V
Related Part
W10515057 (tapered lens, sold separately, typically 2 needed per system)
Repair Difficulty
Medium
Quantity
1 LED light and cover assembly
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Ikea
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power to the refrigerator before beginning, and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. Locate the flat-lens light assembly — this is the main driver board and may be positioned differently from the tapered-lens boards elsewhere in the same refrigerator. Use a flathead screwdriver to detach the front tabs and release the lens cover from the housing. Disconnect the wiring harness from the LED board. Remove the mounting screws or clips securing the old assembly and take it out. Install the new W10515058 in the same position, reconnect the wiring harness fully, and secure the mounting hardware. Snap the flat lens cover back into place. Restore power and confirm this light turns on normally, and check that lighting elsewhere in the refrigerator and freezer is also functioning correctly, since this board supplies their power. Tools needed: flathead screwdriver, work gloves.
Frequently Asked Questions
Why does replacing this one board sometimes fix lights in other parts of my refrigerator?
This board doesn't just light its own location — it also supplies power to the other LED lights in both the refrigerator and freezer compartments. If this board fails or malfunctions, it can affect lighting elsewhere in the unit even though the other light boards themselves are working fine. This is why some refrigerators show strange symptoms, like all the lights strobing together, when only this one board has actually failed.
Is this the same as your W10515057 listing?
No, these are different parts in the same lighting system. This W10515058 uses a flat lens cover and serves as the main power driver, while our W10515057 listing uses a tapered lens and is typically needed in pairs elsewhere in the same refrigerator. Most of these refrigerators use 2 tapered-lens boards (W10515057) and 1 flat-lens board (this W10515058) altogether.
Is this a difficult repair?
It's rated as a medium-difficulty repair — straightforward for a confident DIYer with a flathead screwdriver, but slightly more involved than the simplest appliance fixes since it involves detaching cover tabs and working with the wiring harness behind the lens.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the LED module, flat lens cover design, and mounting configuration of the original WPW10515058 assembly used in compatible Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO Refrigerator Replacement Part
XPARTCO W10515057B Refrigerator LED Light Board Replaces WPW10515057
Aftermarket LED light circuit board only for compatible 1-plug WPW10515057-style refrigerator light assemblies. Reuse the original housing and tapered lens/cover.
Product Overview
The XPARTCO W10515057B Refrigerator LED Light Board is an aftermarket replacement circuit/driver board for select refrigerator light assemblies that use the WPW10515057 / W10515057 1-plug configuration.
Board only: the plastic light housing and lens/cover are not included.
Quick Answer
Use W10515057B when the compatible WPW10515057-style light assembly has a failed electronic board but the existing housing and lens can be reused. Verify your original part number and connector configuration before ordering.
Common Problems This Part May Fix
Refrigerator interior LED light does not illuminate
LED light flickers or operates intermittently
Light remains dim despite a good connection
Existing light housing and lens are reusable but the electronic board has failed
Replaces and Cross-References
WPW10515057, W10515057, W10398007, AP6022533, AWP51164, EAP11755866, PD00031142, PS11755866
These numbers identify the compatible OEM light assembly family. W10515057B is an XPARTCO aftermarket LED light board only, not the complete Whirlpool light housing/lens assembly.
Compatibility
Designed for refrigerators that use the WPW10515057 1-plug LED light assembly. Compatible model examples include:
8WRS25KNBF02
MSF21D4MDH01
WRS322FDAM02
106.51129211
WRS322FNAH00
MSF25D4MDE02
WRS3L5FNDH00
KSF22C4CYY00
WRS325FDAT04
WRS335FDDB02
WRS537SIAM01
WRS325FDAB05
Important: Partial model list only. Confirm the complete refrigerator model and original light part number before ordering. WPW10515057 is the 1-plug light family; WPW10515058 is the different 2-plug light and should not be substituted by appearance alone.
Key Features
XPARTCO aftermarket replacement
Electronic LED light circuit board only
For compatible WPW10515057 1-plug light assemblies
Allows reuse of the original housing and lens when serviceable
Designed for select Whirlpool-built refrigerator platforms
Product Specifications
XPARTCO Part Number
W10515057B
Part Type
Refrigerator LED Light Light Circuit Board
Brand
XPARTCO
Condition
New
Replacement Type
Aftermarket
Compatible OEM Assembly
WPW10515057 / W10515057
Connector Family
1-Plug WPW10515057 Style
Housing Included
No
Lens / Cover Included
No
Package Quantity
1 LED Light Board
Installation Notes
Disconnect refrigerator power before service.
Remove the existing LED light assembly according to the appliance service procedure.
Confirm the original assembly is WPW10515057 / W10515057 or a verified equivalent and uses the 1-plug configuration.
Transfer the replacement board into the existing serviceable housing/lens as applicable.
Reconnect wiring securely and reinstall the light assembly.
Restore power and verify proper lighting operation.
Diagnostic note: Multiple dark or flickering refrigerator LEDs can sometimes be caused by another failed module, wiring problem, or control issue. Diagnose the lighting circuit before replacing parts unnecessarily.
Frequently Asked Questions
Does W10515057B include the plastic light housing and lens?
No. This listing is for the LED light circuit board only. Reuse your existing housing and lens if they are in serviceable condition.
Does it replace WPW10515057?
It is designed as a board-only aftermarket repair option for compatible WPW10515057-style 1-plug light assemblies. It is not a complete OEM light assembly.
Is this the same as WPW10515058?
No. WPW10515058 is the similar 2-plug light family; WPW10515057 is the 1-plug family.
Is this Genuine Whirlpool OEM?
No. W10515057B is an XPARTCO aftermarket replacement board.
Shop With Confidence
Verify your refrigerator model, original light part number, and connector configuration before ordering.
XPARTCO ReplacementBoard Only1-Plug Light FamilyCompatibility Support
XPARTCO Refrigerator Replacement Part
XPARTCO W10515058B Refrigerator LED Light Driver Board for WPW10515058
Aftermarket LED driver/circuit board only for compatible 2-plug WPW10515058-style refrigerator light assemblies.
Product Overview
The XPARTCO W10515058B Refrigerator LED Light Driver Board is an aftermarket replacement circuit/driver board for select refrigerator light assemblies that use the WPW10515058 / W10515058 2-plug configuration.
Board only: the plastic light housing and lens/cover are not included.
Quick Answer
Use W10515058B when the compatible WPW10515058-style light assembly has a failed electronic board but the existing housing and lens can be reused. Verify your original part number and connector configuration before ordering.
Common Problems This Part May Fix
Refrigerator interior LED light does not illuminate
LED light flickers or operates intermittently
Light remains dim despite a good connection
Existing light housing and lens are reusable but the electronic board has failed
Replaces and Cross-References
WPW10515058, W10515058, W10465957, W10522611, AP6022534, AWP993990, EAP11755867, PD00030078, PS11755867
These numbers identify the compatible OEM light assembly family. W10515058B is an XPARTCO aftermarket driver board only, not the complete Whirlpool light housing/lens assembly.
Compatibility
Designed for refrigerators that use the WPW10515058 2-plug LED light assembly. Compatible model examples include:
MSF25D4MDE03
MSF21D4MDH00
MSF25D4MDM02
WRS325FDAB02
WRS325FDAM04
KSF22C4CYY01
106.41122211
106.51139214
106.51799411
106.41152211
106.51722410
106.41159211
Important: Partial model list only. Confirm the complete refrigerator model and original light part number before ordering. WPW10515058 uses a 2-plug configuration; WPW10515057 is a different 1-plug light and should not be substituted by appearance alone.
Key Features
XPARTCO aftermarket replacement
Electronic LED driver/circuit board only
For compatible WPW10515058 2-plug light assemblies
Allows reuse of the original housing and lens when serviceable
Designed for select Whirlpool-built refrigerator platforms
Product Specifications
XPARTCO Part Number
W10515058B
Part Type
Refrigerator LED Light Driver / Circuit Board
Brand
XPARTCO
Condition
New
Replacement Type
Aftermarket
Compatible OEM Assembly
WPW10515058 / W10515058
Connector Family
2-Plug WPW10515058 Style
Housing Included
No
Lens / Cover Included
No
Package Quantity
1 Driver Board
Installation Notes
Disconnect refrigerator power before service.
Remove the existing LED light assembly according to the appliance service procedure.
Confirm the original assembly is WPW10515058 / W10515058 or a verified equivalent and uses the 2-plug configuration.
Transfer the replacement board into the existing serviceable housing/lens as applicable.
Reconnect wiring securely and reinstall the light assembly.
Restore power and verify proper lighting operation.
Diagnostic note: Multiple dark or flickering refrigerator LEDs can sometimes be caused by another failed module, wiring problem, or control issue. Diagnose the lighting circuit before replacing parts unnecessarily.
Frequently Asked Questions
Does W10515058B include the plastic light housing and lens?
No. This listing is for the LED driver/circuit board only. Reuse your existing housing and lens if they are in serviceable condition.
Does it replace WPW10515058?
It is designed as a board-only aftermarket repair option for compatible WPW10515058-style 2-plug light assemblies. It is not a complete OEM light assembly.
Is this the same as WPW10515057?
No. WPW10515057 is the similar 1-plug light family. WPW10515058 is the 2-plug family.
Is this Genuine Whirlpool OEM?
No. W10515058B is an XPARTCO aftermarket replacement board.
Shop With Confidence
Verify your refrigerator model, original light part number, and connector configuration before ordering.
XPARTCO ReplacementBoard Only2-Plug Light FamilyCompatibility Support
XPARTCO WB02X35488 Microwave Halogen Light Bulb
Product Overview
The XPARTCO WB02X35488 Microwave Halogen Light Bulb provides bright interior illumination for your microwave, allowing you to clearly monitor cooking progress. Brighten your microwave with the replacement WB02X35488 Microwave Halogen Light Bulb. This high-quality Light bulb, designed for GE, Hotpoint, and Kenmore/Sears microwaves, provides clear illumination for the interior or surface below, ensuring easy monitoring of your cooking. Featuring a G8 bi-pin base (120V, 50W, 3000K warm white), this durable halogen bulb offers reliable performance and easy installation.
Quick Answer
If your microwave light is dim, flickering, or not working, the WB02X35488 halogen bulb may be burned out. Replacing it restores clear visibility while cooking.
Replaces Part Numbers
Replaces OEM part number: WB02X35488, WB08X10057, WB08X10051, WB25X25393, WB36X10292, AGE368071, PD00070655, EAP6989401, AP6989401, PS16216934.
Compatibility
This microwave halogen light bulb is compatible with select GE, Hotpoint, and other GE-manufactured microwaves.
GE: CSA1201RSS01, CSA1201RSS02, CSA1201RSS03, CVM1790SS1SS, CVM1790SS2SS, JVM1790BK01, JVM1790CK01, JVM1790SK01, JVM1790WK01, JNM3163RJ1SS, JNM3163RJ2SS, JNM3163RJ3SS
Hotpoint: Select models requiring WB08X10057 or compatible halogen bulbs
Kenmore/Sears: Select models requiring WB08X10057 or compatible halogen bulbs
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Microwave interior light not working
Dim or flickering light
Reduced visibility while cooking
Key Features
Bright halogen illumination
Restores clear interior visibility
High-quality aftermarket replacement
Easy bulb replacement design
Product Specifications
Part Number: WB02X35488
Part Type: Microwave Halogen Light Bulb, 120V, 50W, G8 bi-pin base, 1.69" x 0.5", 3000K warm white, 2400 lumens, dimmable, 2000-hour average life, copper contacts.
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Microwave Interior Lighting
Troubleshooting Guide
No interior light → Burned out bulb
Flickering light → Failing bulb
Dim light → Aging or damaged bulb
When Should You Replace This Bulb?
Replace this bulb if your microwave interior light is not functioning properly or has become dim or inconsistent.
Installation Notes
⚠️ Disconnect power before installation. Allow the bulb to cool before handling and replace carefully according to your microwave model.
Related Parts
Microwave Door Switch
Control Panel
Turntable Motor
Frequently Asked Questions
Will this bulb fit my microwave?This bulb fits many GE and compatible models. Always verify your model number.
Is this a halogen bulb?Yes, this is a halogen light bulb designed for microwave use.
What are signs of a bad bulb?No light, dim light, or flickering indicates replacement is needed.
Is installation difficult?Most bulbs are easy to replace, but always follow your appliance manual.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
XPARTCO W11130208 Refrigerator LED Light Module for W11683241
The XPARTCO W11130208 is an aftermarket replacement LED light module for Whirlpool, KitchenAid, and Kenmore Elite refrigerators. W11130208 has been officially superseded by Whirlpool's current part number, W11683241 — the two are the same lighting solution across production revisions, so this listing ships as the current W11683241 service kit and will correctly replace an original W11130208 module. These modules attach inside the cabinet and illuminate the refrigerator or freezer compartment with efficient LED lighting.
Rated 6V, these modules are wired in a series circuit — multiple modules connected end to end along a light strip. That series design has an important consequence for diagnosis: most "LED failures" that look like a complete lighting outage are actually just one burnt-out module dragging down the entire chain, not every module failing at once. A pigtail extension on the current kit design specifically addresses the most common DIY complaint with this repair — not being able to reach the connector behind the housing. Symptoms include dim or flickering lights, partial lighting where part of the compartment goes dark while the rest stays lit, or lights that don't turn on at all. It directly replaces AP7216885, W10279030, W10412708, W10623956, W10637153, WPW10637153, W10758333, W10876279, and W11203918.
Quick Answer
The XPARTCO W11130208 Refrigerator LED Light Module fixes Whirlpool, KitchenAid, and Kenmore Elite refrigerators with dim or flickering lights, partial lighting (part of the compartment dark while the rest stays lit), or lights that don't turn on at all. 6V modules, series circuit. Replaces AP7216885, W10279030, W10412708, W10623956, W10637153, WPW10637153, W10758333, W10876279, W11203918. This part number has been officially superseded by W11683241 — this listing ships as the current, direct-fit replacement.
Common Problems This Part Fixes
Refrigerator or freezer lights are dim or flickering
Part of the compartment is dark while the rest of the light strip still works
Lights don't turn on at all when the door is opened
Lighting that has gradually dimmed over time
One section of the light strip out while the remaining sections work normally
Inconsistent lighting that flickers intermittently rather than staying steady
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator LED light module directly replaces the following OEM and cross-reference part numbers:
W11130208, W10758333, W10412708, W10279030, W10637153, W10876279, AP6262381, PS12347525,
Single Light used in Kit W11683241, 4591417, 4982094, AP6262381, AP7216885, EAP17216451, EAP6262381, PS12347525, PS17216451, AWP46249, PD00084706
W11130208 is the earlier Whirlpool number for this part; W11683241 is the current part number. If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This LED light module is compatible with select Whirlpool refrigerators, and also fits select KitchenAid and Kenmore Elite refrigerators built on the same platform, including model numbers such as:
Whirlpool: WRX988SIBM01, WRX988SIBW00, WRS973CIDM00, WRF991BOOM01, WRF989SDAM02, WRS965CIAM01, WRS965CIAE00
KitchenAid: KFIV29PCMS02, KRSC500ESS01, KRSF505EBL01, KRSF505ESS01, KRSF505EWH01
Kenmore: 10651173310, 10651762511, 10651763511, 10651764511, 10651769512, 59672389411
Note: This part is model-specific, not universal — several visually similar LED module kits exist across the Whirlpool lineup (including W11483116 and W10843353/W10695459 for other model groups) with different cross-reference sets. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which module fits your refrigerator.
Key Features
Aftermarket replacement LED light module — illuminates the refrigerator or freezer interior
Ships as the current W11683241 kit, the official replacement for the superseded W11130208 number
Resolves "dim or flickering lights," "partial lighting," and "lights won't turn on" symptoms
Rated 6V, wired in a series circuit
Pigtail extension design for easier access to the connector behind the housing
Pop-out, plug-in module replacement — no screwdriver or wire nuts needed for the module swap itself
Replaces AP7216885, W10279030, W10412708, W10623956, W10637153, WPW10637153, W10758333, W10876279, and W11203918
Compatible with Whirlpool, KitchenAid, and Kenmore Elite refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
W11130208
OEM Part Number
W11130208
Part Type
Refrigerator LED Light Module
Condition
Aftermarket Replacement
Voltage
6V
Circuit Type
Series (multiple modules per strip)
Supersedes
Current part number is W11683241 (same solution, current revision)
Connector Design
Pigtail extension for easier housing access
Repair Difficulty
Medium — 30 to 60 minutes
Compatible Brands
Whirlpool, KitchenAid, Kenmore Elite
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Locate the light housing panel inside the refrigerator or freezer compartment where the dim, flickering, or dark section is located, and remove it to access the module strip — this typically requires basic hand tools depending on your model. Identify the specific module that has failed; a burnt-out module in the middle of the strip can cause everything downstream of it to go dark or dim, even though only that one module has actually failed. Pop the old module out of its housing and unplug its connector — the pigtail extension design makes it easier to reach this connector without fully disassembling the housing. Plug in the new module and press it back into the housing in the same position. Reinstall the housing panel, restore power, and open the door to confirm even, consistent lighting has been restored across the full strip. Tools needed: basic hand tools for housing access (model-dependent), work gloves.
Frequently Asked Questions
I ordered W11130208 but received a module marked W11683241. Is that correct?
Yes. W11130208 has been officially superseded by Whirlpool's current part number, W11683241 — they are the same lighting solution across production revisions, and W11683241 is what currently ships when this part is ordered. It installs and functions identically to the original W11130208.
Only part of my fridge light strip is dark. Do I need to replace the whole strip?
Not necessarily. These modules are wired in a series circuit, meaning several modules connect end to end along one strip. A single burnt-out module can cause everything downstream of it in that chain to go dark or dim, even though the rest of the modules are still perfectly good. In many cases, replacing just the failed module restores lighting to the whole strip rather than needing to replace every module.
I can't reach the connector behind the light housing. Is that normal?
This is a very common complaint with earlier module designs, and it's specifically what the pigtail extension on the current kit is designed to solve — it gives you more reach to access the connector without needing to fully disassemble the housing. If you're still struggling to reach it, double-check that you've removed all the housing fasteners for your specific model before forcing anything.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the 6V rating, series wiring, and housing fit of the original W11130208 / W11683241 LED light module used in compatible Whirlpool, KitchenAid, and Kenmore Elite refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WB02X35488 (2 Pack) Microwave Halogen Light Bulb
Product Overview
The XPARTCO WB02X35488 Microwave Halogen Light Bulb provides bright interior illumination for your microwave, allowing you to clearly monitor cooking progress. Brighten your microwave with the replacement WB02X35488 Microwave Halogen Light Bulb. This high-quality Light bulb, designed for GE, Hotpoint, and Kenmore/Sears microwaves, provides clear illumination for the interior or surface below, ensuring easy monitoring of your cooking. Featuring a G8 bi-pin base (120V, 50W, 3000K warm white), this durable halogen bulb offers reliable performance and easy installation.
Quick Answer
If your microwave light is dim, flickering, or not working, the WB02X35488 halogen bulb may be burned out. Replacing it restores clear visibility while cooking.
Replaces Part Numbers
Replaces OEM part number: WB02X35488, WB08X10057, WB08X10051, WB25X25393, WB36X10292, AGE368071, PD00070655, EAP6989401, AP6989401, PS16216934.
Compatibility
This microwave halogen light bulb is compatible with select GE, Hotpoint, and other GE-manufactured microwaves.
GE: CSA1201RSS01, CSA1201RSS02, CSA1201RSS03, CVM1790SS1SS, CVM1790SS2SS, JVM1790BK01, JVM1790CK01, JVM1790SK01, JVM1790WK01, JNM3163RJ1SS, JNM3163RJ2SS, JNM3163RJ3SS
Hotpoint: Select models requiring WB08X10057 or compatible halogen bulbs
Kenmore/Sears: Select models requiring WB08X10057 or compatible halogen bulbs
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Microwave interior light not working
Dim or flickering light
Reduced visibility while cooking
Key Features
Bright halogen illumination
Restores clear interior visibility
High-quality aftermarket replacement
Easy bulb replacement design
Product Specifications
Part Number: WB02X35488
Part Type: Microwave Halogen Light Bulb, 120V, 50W, G8 bi-pin base, 1.69" x 0.5", 3000K warm white, 2400 lumens, dimmable, 2000-hour average life, copper contacts.
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Microwave Interior Lighting
Troubleshooting Guide
No interior light → Burned out bulb
Flickering light → Failing bulb
Dim light → Aging or damaged bulb
When Should You Replace This Bulb?
Replace this bulb if your microwave interior light is not functioning properly or has become dim or inconsistent.
Installation Notes
⚠️ Disconnect power before installation. Allow the bulb to cool before handling and replace carefully according to your microwave model.
Related Parts
Microwave Door Switch
Control Panel
Turntable Motor
Frequently Asked Questions
Will this bulb fit my microwave?This bulb fits many GE and compatible models. Always verify your model number.
Is this a halogen bulb?Yes, this is a halogen light bulb designed for microwave use.
What are signs of a bad bulb?No light, dim light, or flickering indicates replacement is needed.
Is installation difficult?Most bulbs are easy to replace, but always follow your appliance manual.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
XPARTCO W11520384 Microwave Light Bulb
The XPARTCO W11520384 is an aftermarket replacement halogen light bulb for Whirlpool, Maytag, and Amana microwaves and microwave/hood combination units. This G9-base halogen bulb provides the bright, reliable interior illumination that lets you see food clearly while cooking, making it easier to monitor progress and avoid accidents from working in a dim cavity.
Rated 120V, 40W, 60Hz. Over time, halogen bulbs burn out from normal use, or can dim and fail prematurely if the glass envelope is touched with bare fingers during installation, since skin oils can cause uneven heating and shorten the bulb's life. A failed bulb produces a straightforward and unmistakable symptom: reduced visibility or complete darkness inside the microwave cavity during use. It directly replaces 4981936, EAP17215402, FIX17215402, OEM28869642, PS17215402, AWP861603, and PD00089571.
Quick Answer
The XPARTCO W11520384 Microwave Light Bulb fixes Whirlpool, Maytag, and Amana microwaves and microwave/hood combos with a dim or completely burned-out interior light. G9 base, 120V, 40W, 60Hz halogen bulb. Replaces 4981936, EAP17215402, FIX17215402, OEM28869642, PS17215402, AWP861603, PD00089571. Avoid touching the glass with bare fingers during installation — skin oils can cause the bulb to fail prematurely or heat unevenly.
Common Problems This Part Fixes
Microwave interior light burned out completely
Microwave interior light dim or flickering
Difficulty monitoring food while cooking due to poor interior lighting
Light that worked intermittently before failing entirely
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This microwave light bulb directly replaces the following OEM and cross-reference part numbers:
W11520384, 4981936, EAP17215402, FIX17215402, AP7217410, AWP861603, OEM21652239, PD00089571, PS17215402
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This light bulb is compatible with select Whirlpool microwaves and microwave/hood combos, and also fits select Maytag and Amana models built on the same platform, including model numbers such as:
WMH31017HB09, WMH31017HS11, WMH31017HW10, YWMH31017HB05, YWMH31017HZ08, YWMH31017HZ09, YWMH31017HS09
WMH32519HB08, WMH32519HT10, WMH32519HV09, WMH32519HW08, WMH32519HZ09
WMMS3130RB00, YWMMS3130RB00, YWMMS3130RZ00
UMV1170LB04, UMV1170LS02, UMV1170LW03
MMV1175JB01, MMV1175JB02, YMMV1175JZ02
YMMMS4230PZ01, YAMV2307PFW08, YAMV2307PFW11
Note: Always verify your full model number before ordering, since not all Whirlpool microwaves use this same bulb type and base. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement halogen light bulb — bright, reliable interior illumination
Resolves "burned out light" and "dim interior lighting" symptoms
G9 base, 120V, 40W, 60Hz
Direct drop-in replacement — no tools required on most models
Replaces 4981936, EAP17215402, FIX17215402, OEM28869642, PS17215402, AWP861603, and PD00089571
Compatible with Whirlpool, Maytag, and Amana microwaves and microwave/hood combos
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
W11520384
OEM Part Number
W11520384
Part Type
Microwave Halogen Light Bulb
Condition
Aftermarket Replacement
Bulb Type
Halogen
Base
G9
Voltage
120V
Wattage
40 W
Frequency
60 Hz
Weight
0.02 lbs
Repair Difficulty
Very Easy — no tools required
Quantity
1 light bulb
Compatible Brands
Whirlpool, Maytag, Amana
Installation Notes
⚠️ Unplug Microwave Before Starting — Let The Old Bulb Cool, And Don't Touch The New Glass With Bare Fingers Disconnect power at the outlet before beginning, and if the microwave was recently used, allow the old bulb time to cool completely before touching it. Wear work gloves. Locate the light bulb cover or access panel inside the microwave cavity, or behind an exterior panel depending on your model, and remove it per your appliance's instructions. Remove the old bulb from its socket. When handling the new W11520384, avoid touching the glass envelope directly with bare fingers — use a clean cloth or tissue if needed, since skin oils can transfer to the glass and cause the bulb to heat unevenly or fail prematurely. Insert the new bulb into the socket, making sure it's seated fully and correctly. Reinstall the cover or access panel. Restore power and turn on the microwave light to confirm normal, bright illumination. Tools needed: none, or a screwdriver if your model's bulb is behind a screwed access panel.
Frequently Asked Questions
Why shouldn't I touch the new bulb with my bare fingers?
Halogen bulbs are sensitive to skin oils left on the glass envelope. If oils from your fingers transfer to the glass during installation, they can cause the bulb to heat unevenly when it's powered on, which can shorten its lifespan or lead to premature failure. Handling the bulb with a clean cloth or tissue avoids this issue entirely.
My microwave light flickers before going out completely. Is that normal before a bulb fails?
Yes, flickering or dimming is a common warning sign that a halogen bulb is nearing the end of its life, often shortly before it burns out completely. If you notice this happening, it's a good time to have a replacement bulb on hand.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the G9 base, wattage, and voltage rating of the original W11520384 halogen bulb used in compatible Whirlpool, Maytag, and Amana microwaves.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WR51X10055 Refrigerator Defrost Heater Assembly
The XPARTCO WR51X10055 is an aftermarket replacement refrigerator defrost heater and bracket assembly compatible with a wide range of GE, Hotpoint, Kenmore, Haier, Americana, Monogram, and Café refrigerators. The defrost heater is a glass quartz tube heater mounted on a bracket below the evaporator coils in the freezer compartment. During each automatic defrost cycle, the heater energizes and melts any frost that has accumulated on the evaporator coils — maintaining unobstructed airflow through the coils so the refrigerator can cool efficiently. When the heater fails, frost accumulates on the coils unchecked, blocking airflow and causing both the freezer and fresh food sections to gradually warm up.
Rated at 120V, 725W, this single quartz tube heater assembly measures 12-1/8" L x 3-3/8" W x 2-1/8" H and includes the heater element and mounting bracket. It directly replaces WR51X10030, AP3183311, 914088, AH303781, EA303781, PS303781, SH323, and EAP303781. Often replaced together with the defrost thermostat (WR50X10068) and temperature sensor (WR55X10025) for a complete defrost system repair. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The XPARTCO WR51X10055 Refrigerator Defrost Heater Assembly fixes GE and Hotpoint refrigerators where frost is building up on the evaporator coils, the freezer is too warm, the fresh food section is warming up, or the refrigerator is running continuously without cooling properly. Single quartz tube heater, 120V / 725W. Assembly measures 12-1/8" L x 3-3/8" W x 2-1/8" H. Includes heater and bracket. Replaces WR51X10030, AP3183311, 914088, SH323, and more. Compatible with GE, Hotpoint, Kenmore, Haier, Americana, Monogram, and Café.
Common Problems This Part Fixes
Frost or ice buildup covering the evaporator coils in the freezer compartment
Freezer section warming up or not maintaining set temperature
Fresh food section warming up even though the freezer is running
Refrigerator running continuously but not cooling properly
Visible frost accumulation on the freezer back wall behind the panel
Defrost heater element visibly burned out, broken, or dark/charred at the ends
Both compartments gradually warming up after working normally for years
Replaces Part Numbers
This defrost heater assembly directly replaces the following OEM and cross-reference part numbers:
WR51X10055, WR51X10030, 914088, AGE29323, AH303781, AP3183311, EA303781, EAP303781, PD00001004, PS303781.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This defrost heater is compatible with select refrigerators from the following brands:
GE refrigerators (side-by-side, French door, top-freezer, and bottom-freezer)
Hotpoint refrigerators
Kenmore / Sears refrigerators (select GE-built models)
Haier refrigerators (select GE-platform models)
Americana refrigerators
Monogram refrigerators
Café refrigerators
Tip: When replacing the defrost heater, it is highly recommended to also replace the defrost thermostat (WR50X10068) and temperature sensor (WR55X10025) at the same time. These three parts form the defrost system and are commonly replaced together — replacing all three prevents a second disassembly if another component fails soon after.
Key Features
Single quartz tube glass heater — melts frost from the evaporator coils during each automatic defrost cycle, maintaining airflow and cooling efficiency
Rated 120V / 725W — correct electrical specifications for compatible GE refrigerators
Assembly dimensions: 12-1/8" L x 3-3/8" W x 2-1/8" H — direct fit into the evaporator coil bracket
Includes heater element and mounting bracket — complete assembly ready to install
Replaces WR51X10030 and WR51X10055 — both older and current part numbers covered
Compatible with GE, Hotpoint, Kenmore, Haier, Americana, Monogram, and Café refrigerators
Often replaced together with WR50X10068 defrost thermostat and WR55X10025 temperature sensor
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
Part Number
WR51X10055
Also Replaces
WR51X10030
Part Type
Refrigerator Defrost Heater and Bracket Assembly
Condition
Aftermarket Replacement
Heater Type
Single quartz tube glass heater
Voltage
120V AC
Wattage
725W
Dimensions
12-1/8" L x 3-3/8" W x 2-1/8" H
Includes
Heater element and mounting bracket
Often Replaced With
WR50X10068 Defrost Thermostat, WR55X10025 Temperature Sensor
Compatible Brands
GE, Hotpoint, Kenmore, Haier, Americana, Monogram, Café
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Wear Work Gloves Unplug the refrigerator before beginning. Remove all food and shelving from the freezer compartment. Remove the freezer bottom drawer and the back panel screws (typically 2 hex-head screws). Slide out the back panel to expose the evaporator coils and defrost heater assembly. If the coils are covered in frost or ice, use a hair dryer to melt the ice before removing the heater — do not chip or force the heater free while iced over, as the glass element is fragile and will break. Disconnect the heater wires from the wiring harness — note the orientation before disconnecting. Remove the 2 Phillips screws securing the heater bracket and lift the heater assembly out. Install the new WR51X10055 heater assembly in the same position, reconnect the wires, and reinstall the bracket screws. Reinstall the back panel, shelving, and food. Restore power and verify the defrost cycle operates normally. Wear work gloves throughout — the evaporator area has sharp edges. Tools needed: Phillips screwdriver, 1/4" nut driver, hair dryer (if coils are iced over), work gloves.
Frequently Asked Questions
What does the refrigerator defrost heater do?
Modern refrigerators use an automatic defrost system that periodically runs a defrost cycle — typically once or twice a day — to melt frost that accumulates on the evaporator coils during normal operation. The defrost heater is a glass quartz heating element that energizes during this cycle and melts the frost off the coils. This keeps the coils clear so air can flow freely through them to cool the refrigerator. When the heater fails, frost builds up unchecked on the coils over days or weeks — eventually blocking airflow completely and causing both compartments to warm up, even though the compressor is still running.
How do I know if my defrost heater has failed?
Remove the freezer back panel to expose the evaporator coils. If the coils are heavily coated in frost or solid ice — especially if both the freezer and refrigerator sections have been warming up — a failed defrost heater is the most likely cause. You can confirm with a multimeter: disconnect the heater and probe both wire ends. A working heater shows continuity (resistance between approximately 10–200 ohms at room temperature depending on wattage). No continuity confirms the heater element has burned out. Also visually inspect the glass tube — a burned, blackened, or broken tube is a clear sign of failure.
Should I also replace the defrost thermostat and temperature sensor?
Yes — since the freezer must be fully emptied and the back panel removed to replace the heater, it is highly recommended to also replace the defrost thermostat (WR50X10068) and temperature sensor (WR55X10025) at the same time. All three components form the defrost system and wear at similar rates. A failed thermostat or sensor can cause the heater to run too long or not at all — replacing all three in a single repair eliminates that risk and saves you from another complete freezer teardown in the near future.
My freezer is warming up but the compressor is running — is it the defrost heater?
It often is — but not always. A compressor that is running but not cooling can be caused by a failed defrost heater (frost blocking airflow), a faulty evaporator fan motor (air not circulating), a defrost thermostat or timer failure, or a sealed system problem (refrigerant leak or compressor issue). The easiest way to distinguish a defrost system failure from other causes is to open the freezer and check whether frost has built up on the back panel or coils. If yes, the defrost heater is the most likely culprit. If the coils are clear and the compressor is running, look at the evaporator fan or sealed system next.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured as a single quartz tube glass heater rated at 120V/725W to match the dimensions and performance of the original WR51X10055 defrost heater assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
DA32-00029X Genuine OEM Samsung Refrigerator Temperature Sensor
The DA32-00029X is a Genuine OEM Samsung replacement refrigerator temperature sensor compatible with select Samsung side-by-side and French door refrigerators, as well as related Kenmore Samsung-built models. This NTC (negative temperature coefficient) thermistor continuously monitors the temperature inside the refrigerator and sends resistance-based readings to the electronic control board, which uses this data to cycle the compressor, fans, and defrost heaters to maintain accurate, consistent temperatures throughout the appliance. As the thermistor heats up or cools down, its electrical resistance changes predictably, allowing the control board to calculate the exact temperature in real time.
When this sensor fails — whether shorted, open, or providing drifted/inaccurate readings — the refrigerator may run too cold or too warm, cycle excessively, fail to maintain set temperatures, run continuously, ice up the evaporator, or display temperature-related fault codes. As a Genuine OEM part manufactured by Samsung to factory specifications, the DA32-00029X is rated approximately 13.2 kΩ at 20°C (68°F) when functioning correctly. It is one of the variants in the DA32-00029 sensor family — Samsung uses different production-run variants (M, N, Q, U, X) across model generations, all functionally similar but with different wire harness connectors. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The DA32-00029X Genuine OEM Samsung Refrigerator Temperature Sensor fixes Samsung side-by-side and French door refrigerators that run too cold or warm, cycle excessively, freeze up the evaporator, fail to maintain set temperatures, or display temperature-related fault codes. Genuine OEM Samsung NTC thermistor — approximately 13.2 kΩ at 20°C (68°F). One of the DA32-00029 series variants (M, N, Q, U, X) — confirm your specific variant by connector style before ordering.
Common Problems This Part Fixes
Refrigerator running too cold or too warm — sensor not accurately reporting temperature to the control board
Inconsistent temperatures — fluctuating cooling that can't maintain set point
Excessive or frequent defrost cycles — control board misreading temperature
Refrigerator running continuously without cycling off
Heavy frost or ice buildup on the evaporator coils caused by erratic defrost timing
Food spoilage from temperature instability
Temperature-related error codes displayed on the control panel
Multimeter test shows 0 ohms (shorted) or infinite resistance (open) instead of the expected ~13.2 kΩ at room temperature
Replaces Part Numbers
This temperature sensor directly replaces the following Samsung part number:
DA32-00029X, EAP16732853, FIX16732853, ASM30292, AP7188139, OEM21564426, PD00090960, PS16732853.
The DA32-00029X is part of the broader DA32-00029 sensor family — variants M, N, Q, U, and X are functionally similar Samsung temperature sensors used across different model generations, but with different wire harness connector configurations. They are not automatically interchangeable — match the variant suffix (or the connector style) to your refrigerator. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This temperature sensor is compatible with select Samsung side-by-side and French door refrigerators, including:
Samsung side-by-side refrigerators (select models in the RS-series with the matching DA32-00029X connector)
Samsung 3-door French door refrigerators in 17.5 cu. ft., 19.5 cu. ft., and related capacities (Black Stainless Steel, Black, White, and Stainless Look finishes)
Samsung 4-door French door refrigerators (select RF-series models with the matching DA32-00029X connector)
Kenmore / Sears refrigerators (select Samsung-built models)
Important — Match the Variant to Your Refrigerator: Samsung uses several variants of the DA32-00029 temperature sensor (M, N, Q, U, X) across different model generations. The sensors are similar in function and resistance value, but the wire harness connectors differ — using the wrong variant means the connector won't fit. Before ordering, verify your refrigerator's parts diagram specifies DA32-00029X (not DA32-00029M, N, Q, or U), or visually confirm the connector on your old sensor matches the new one. Contact our support team with your model number if you're unsure.
Key Features
Genuine OEM part manufactured by Samsung to factory specifications — guaranteed fit and performance
NTC (negative temperature coefficient) thermistor — resistance changes predictably with temperature, allowing precise temperature monitoring
Sends real-time temperature data to the control board to regulate compressor cycling, fan operation, and defrost timing
Approximately 13.2 kΩ of resistance at 20°C (68°F) when functioning correctly
Wire harness with connector attached for direct plug-in installation (variant-specific connector — see compatibility note)
One of the DA32-00029 series variants (M, N, Q, U, X) — match to your refrigerator's variant suffix
Compatible with select Samsung side-by-side, 3-door French door, and 4-door French door refrigerators, plus Kenmore Samsung-built models
Installs in 20–30 minutes with basic hand tools
Product Specifications
Part Number
DA32-00029X
Part Type
Refrigerator Temperature Sensor (NTC Thermistor)
Condition
Genuine OEM
Application
Side-by-Side and French Door Refrigerators (Samsung platform)
Sensor Type
NTC (Negative Temperature Coefficient)
Resistance at 20°C
Approximately 13.2 kΩ (68°F)
Variant Family
DA32-00029 (M, N, Q, U, X variants)
Compatible Brands
Samsung, Kenmore (Samsung-built)
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. Samsung refrigerators typically have multiple temperature sensors — fresh food compartment, freezer compartment, and evaporator/defrost sensors — confirm which sensor location matches your symptom and parts diagram before starting. The fresh food and freezer sensors are typically clipped to a wall or shelf bracket inside each compartment, while evaporator/defrost sensors are mounted near the evaporator coils behind a rear access panel. Take a photo of the sensor mounting and wire routing before removing. Disconnect the sensor's wire connector (gently — the molex connectors can be fragile) and release the sensor from its mounting clip. Inspect the connector for corrosion or heat discoloration on the wires — discoloration indicates prior overheating in that area. Install the new DA32-00029X sensor in the same position, reseat the connector firmly, and secure the mounting clip. Restore power, allow several hours for the refrigerator to return to its set temperature, and confirm stable temperature operation before reloading with food. Tools needed: Phillips screwdriver, multimeter (for testing), work gloves.
Frequently Asked Questions
How do I know if the temperature sensor has failed?
Unplug the refrigerator, disconnect the sensor's connector, and set your multimeter to resistance mode. At room temperature (around 20°C/68°F), a working NTC thermistor should read approximately 13.2 kΩ. If the sensor reads 0 ohms, it has shorted internally. If it reads infinite resistance (open circuit, often shown as "OL" on the multimeter), the sensor has failed open. Either reading confirms the sensor needs replacement. If the sensor reads close to 13.2 kΩ at room temperature but the refrigerator still has temperature problems, the control board or another sensor in the system may be the actual cause.
My Samsung refrigerator has multiple temperature sensors — which one do I replace?
Samsung refrigerators typically use multiple temperature sensors: one in the fresh food compartment, one in the freezer compartment, and one near the evaporator coils (often called the defrost sensor). The DA32-00029X is used as the fresh food or freezer compartment temperature sensor on select Samsung models. Confirm the exact mounting location for your specific symptom (e.g., fresh food too warm vs. freezer too cold) and your refrigerator's parts diagram before ordering. The evaporator/defrost sensor is typically a different part number, so don't assume the DA32-00029X covers all sensor positions.
What is the difference between DA32-00029X and DA32-00029M, N, Q, or U?
These are all variants of the same Samsung refrigerator temperature sensor family. They share the same NTC thermistor design and resistance characteristics (approximately 13.2 kΩ at 20°C), but use different wire harness connector configurations to match different refrigerator generations and wiring designs. The X variant is used on select Samsung side-by-side and French door models, while M, N, Q, and U variants appear on other model groups. They are not automatically interchangeable — match the variant to your refrigerator's exact part diagram, or visually compare connector styles before ordering.
My Samsung fridge is icing up the back wall — could this be the sensor?
Possibly, yes. If the temperature sensor near the evaporator (the defrost sensor) is misreporting temperature, the control board may not trigger the defrost cycle when needed, allowing ice to build up on the evaporator coils. Eventually this ice migrates to the rear interior wall as a frozen sheet. If your symptom is back-wall icing combined with poor cooling, the evaporator sensor is a likely cause — but confirm whether the DA32-00029X is the evaporator sensor on your specific model, or whether your model uses a different part number for that position. Always verify against your model's parts diagram.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Samsung to factory specifications. It is the exact same temperature sensor installed in compatible Samsung side-by-side and French door refrigerators (and Kenmore Samsung-built models) from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WB25X10019 Microwave Light Bulb - Compatible with GE, LG, and Other Microwaves
Product Description
Illuminate your microwave’s interior with the replacement WB25X10019 Microwave Light Bulb. This part is designed for select GE, LG, and other compatible microwave models, providing bright, reliable lighting for safe and convenient operation. This Halogen Light Bulb is a replacement part for specific microwave models and ovens. It provides interior lighting, allowing you to clearly see the contents inside the appliance during operation. This illumination is essential for monitoring cooking progress and ensuring safety. You should replace the halogen light bulb if it burns out or becomes damaged. Causes of a bad halogen light bulb can include regular use over time, electrical surges, or physical impact that can cause the bulb to break.
Note: Disconnect power before installation. Verify model compatibility for proper fit.
Replaces part numbers: WB25X10019, WB36X10344, WB08X10050, WB36X10246, AH2351821, EA2351821, AP4380308, PS2351821, WB36X10213, 947124, AP3203814, PS651484, 26QBP0213, 6912A40002E, 383EW1A077A, 383EW1A077B, 6912A40002A, 1462319, 383EW1A077D, AH3530398, EA3530398, AP4457323, PS3530398.
Compatibility:
Compatible with models including but not limited to:
GE: JVM3160DFBB, JVM6175SKSS, JVM7195EKES, JNM3161MFSA, PVM9005SJSS
LG: LMV2031ST, LMV1762ST, MV1501BQ, LMV1683SW
Other: Select Kenmore, Frigidaire, and Whirlpool microwaves
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand Compatibility: Fits select GE, LG, Kenmore, Frigidaire, and Whirlpool microwaves.
🔥 Specifications: 20W, 120V, T4 halogen bulb with G8 bi-pin base.
💰 Cost-Effective Alternative: Matches OEM performance at a lower price.
🛠️ Easy Installation: Requires screwdriver; typically installed in 5–10 minutes.
🛡️ Effective Fixes: Resolves no light, dim light, or flickering in the microwave.
Product Specification
Part Number: WB25X10019
Component Type: Microwave light bulb
Material: Glass bulb, metal G8 bi-pin base
Mounting: Inserts into socket within microwave compartment
Operating Conditions: Suitable for high-heat microwave environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the microwave from power before installation. Follow the owner’s manual for guidance. Avoid touching the bulb with bare hands to prevent oil residue damage.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running safely today!
Add to cart now for a budget-friendly fix!
Genuine OEM DA97-15217D Refrigerator Ice Maker Assembly
The Genuine OEM Samsung DA97-15217D is the complete ice maker assembly for select Samsung refrigerators. The ice maker fills its trays with water, freezes it, and drops the cubes into the storage bin, using sensors to monitor the ice level and start new production when needed. When it fails, the refrigerator may stop making ice, make small or misshapen cubes, or jam.
This is the original Samsung part, not an aftermarket equivalent. It replaces several earlier Samsung ice maker numbers, so the new assembly may be listed under a different number than your old one. Check your model number before ordering.
Quick Answer
The Genuine OEM DA97-15217D Ice Maker Assembly replaces the complete ice maker on a compatible Samsung refrigerator when it has stopped working. Replaces DA97-15217A, DA97-15217B and DA97-12317A. Classic symptoms: ice production stops, cubes are small or misshapen, or the ice maker jams. Check for frost buildup around the ejector arm first.
Common Problems This Part Fixes
Ice production stops unexpectedly
Small or misshapen ice cubes
Ice maker jamming
Water leaking inside the ice compartment
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This ice maker assembly replaces or supersedes the following part numbers:
DA97-15217D, DA97-12317A, DA97-12317B, DA97-15217A, DA97-15217B, DA97-15217E, 4546148, DA97-15335A, DA97-15217A-00, AP6261445, ASM806832, EAP12115595, OEM18784344, PD00037355, PS12115595
Samsung sells ice makers under similar numbers for different refrigerators, so the last letter and the number family matter. If your old ice maker shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This ice maker assembly is listed for Samsung refrigerators, with roughly 100 models listed by retailers, including these examples:
Samsung RF28HMEDBSR/AA, RF28HFEDBSR/AA, RF25HMEDBSR/AA
Samsung RF263BEAESR/AA, RF263TEAESG, RF265BEAESR/AA
Samsung RF26J7500SR/AA, RF28K9070SR/AA, RF28R7201SR
Note: The models above are a small sample, not a full list. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM Samsung part, not an aftermarket equivalent
Complete ice maker assembly, sold as one unit
Fills the trays, freezes the water and drops the cubes into the bin
Replaces several earlier Samsung ice maker numbers
Product Specifications
Part Number
DA97-15217D
OEM Part Number
DA97-15217D
Part Type
Refrigerator Ice Maker Assembly
Condition
Genuine OEM
Manufacturer
Samsung
Quantity
1 Assembly
Application
Select Samsung Refrigerators
Installation Notes
⚠️ Unplug The Refrigerator Before Installing Unplug the refrigerator before you begin. Remove the screws at the top of the old assembly and detach it from the freezer wall, then unplug the wiring harnesses. Position the new assembly, aligning the mounting holes, and fasten it with the original screws. Reconnect the harnesses, plug the refrigerator back in, and hold the test/reset button for 3 seconds to start the ice maker. Allow time for the first ice to be made.
Frequently Asked Questions
My ice maker stopped making ice. Is this the part I need?
It can be, if the ice maker itself has failed. Check first for frost buildup that could block the ejector arm, and check the water filter, the fill tube and the seals. If those are fine, replacing the assembly is the repair.
Is this an OEM or aftermarket part?
This is a genuine OEM part from Samsung, not an aftermarket equivalent.
Does the last letter of the part number matter?
Yes. Samsung ice makers with similar numbers can differ by revision or by refrigerator type, so match the full part number and your model number, or contact our support team and we'll check for you.
Will this fit my refrigerator?
It is listed for roughly 100 Samsung models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
