ERP 74007733 Surface Burner Knob
1/4" stem length,
6 o'clock flat,
0.256
Replaces Part Numbers:WP7733P410-60, 7733P410-60, 74007733, AP6011505, PS11744702, WP7733P410-60VP
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO DG64-00472B Gas Range / Stove Burner Knob
Fits Specific Samsung Range / Cooktop models.
Replaces Part Numbers: DG64-00472B, DG64-00347B, 3555006, AP5949297, PS9865173.
Description: The Knob Assembly is a replacement Part designed for adjusting the temperature of specific Samsung surface burner models. It accepts a D-shaped shaft and is sold individually.
This is an aftermarket part that can be used as a replacement for the OEM part.
(5 Pack) ERP W10594481 Surface Burner Knob
3/8" stem length,
3 o'clock flat, 0.256
Mold#: 5T03
Replaces Part Numbers:WPW10594481, W10594481, AP6023301, PS11756643
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO 7733P410-60 Surface Burner Knob (Replaces WP7733P410-60)
Product Overview
The XPARTCO 7733P410-60 Surface Burner Knob (Replaces WP7733P410-60) is designed to control the heat level of your range’s surface burners. This durable replacement knob restores precise control and a clean, finished look to your cooktop.
Quick Answer
If your stove knob is cracked, loose, missing, or difficult to turn, the 7733P410-60 burner knob is likely worn. Replacing it restores proper control of burner heat settings.
Replaces Part Numbers
Replaces OEM part number: WP7733P410-60, 7733P410-60, 74007733, WP7733P410-60VP, EAP11744702, AWP48511, PD00004326, AP6011505, PS11744702.
Compatibility
This surface burner knob is compatible with select Whirlpool, Maytag, Amana, and other compatible ranges.
Whirlpool Ranges
Maytag Ranges
Amana Ranges
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Broken or cracked knob
Knob slipping or not turning properly
Missing control knob
Difficulty adjusting burner heat
Key Features
Restores precise burner control
Easy push-on installation
High-quality aftermarket replacement
Durable construction for daily use
Product Specifications
Part Number: 7733P410-60
Part Type: Surface Burner Knob
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Range Cooktop Control
Troubleshooting Guide
Knob spins freely → Worn internal insert
Cannot adjust flame → Damaged knob
Knob falls off → Cracked or loose fit
When Should You Replace This Knob?
Replace this knob if it is cracked, loose, missing, or no longer controls burner settings accurately.
Installation Notes
⚠️ Ensure the appliance is off. Pull the old knob straight off the control shaft and push the new knob firmly into place.
Related Parts
Surface Burner Valve
Igniter Switch
Control Panel Overlay
Frequently Asked Questions
Will this knob fit my range?This knob fits many Whirlpool and compatible models. Always verify your model number.
Is installation difficult?No, most knobs are push-on and can be replaced without tools.
What are signs of a bad knob?Cracks, slipping, or inability to control heat settings.
Is this OEM or aftermarket?This is a high-quality aftermarket replacement part.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
XPARTCO WE01X20374 Dryer Timer Knob
The XPARTCO WE01X20374 is an aftermarket replacement timer knob for GE dryers, and also fits select Hotpoint and RCA models. Located on the control panel, this knob mounts onto the timer's D-shaped shaft and lets you set desired drying times and select additional functions like air fluff or wrinkle release cycles.
White in color, with a D-shaped opening for the timer shaft. Causes of a faulty timer knob include wear from repeated grasping and twisting over years of use, or exposure to high dryer temperatures degrading the knob material over time. Symptoms of a damaged timer knob include difficulty rotating the knob smoothly to desired time settings, the dryer not initiating cycles properly based on knob position, a loose or wobbling knob that could fall off, or cracking, chipping, or discoloration on the knob exterior. It directly replaces WE01X20374, WE1M856, 3276177, WE1M589, AGE25562, AP5805160, EAP8769912, PD00023120, PS8769912.
Quick Answer
The XPARTCO WE01X20374 Dryer Timer Knob fixes GE, Hotpoint, and RCA dryers with a knob that's hard to turn, doesn't properly select cycle settings, wobbles or feels loose, or shows cracking, chipping, or discoloration. White, D-shaped opening. Replaces WE01X20374, WE1M856, 3276177, WE1M589, AGE25562, AP5805160, EAP8769912, PD00023120, PS8769912. This is the correct knob to pair with certain GE dryer models where the similarly-numbered WE1M654 knob is not the right fit and can throw off cycle timing.
Common Problems This Part Fixes
Difficulty rotating the knob smoothly to desired time settings
Dryer not initiating cycles properly based on knob position
Loose or wobbling knob that could fall off
Cracking, chipping, or discoloration on the knob exterior
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer timer knob directly replaces the following OEM and cross-reference part numbers:
WE01X20374, WE1M856, 3276177, WE1M589, AGE25562, AP5805160, EAP8769912, PD00023120, PS8769912
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This timer knob is compatible with select GE dryers, and also fits select Hotpoint and RCA dryers built on the GE platform.
Note — not the same as WE1M652 or WE1M654: These are separate, similarly-styled knobs used on other GE/Hotpoint models. GE's own support has confirmed cases where installing WE1M654 on the wrong model throws off cycle timing, and WE01X20374 is the correct part in those situations. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which knob your dryer needs.
Key Features
Aftermarket replacement timer knob — direct interface for setting drying time and cycle functions
Resolves "hard to turn," "won't select cycle correctly," "loose/wobbling," and "cracked or discolored" symptoms
White finish, D-shaped opening for the timer shaft
Direct drop-in replacement — no tools required for most installations
Replaces WE01X20374, WE1M856, 3276177, WE1M589, AGE25562, AP5805160, EAP8769912, PD00023120, PS8769912
Compatible with GE, Hotpoint, and RCA dryers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XPWE01X20374
OEM Part Number
WE01X20374
Part Type
Dryer Timer Control Knob
Condition
Aftermarket Replacement
Color
White
Shaft Opening
D-shaped
Extended Shaft
1/8"
Repair Difficulty
Very Easy — no tools typically required
Quantity
1 timer knob
Compatible Brands
GE, Hotpoint, RCA
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power at the outlet before beginning. Remove the old knob by pulling it straight off the control shaft — no tools are typically required. Align the D-shaped socket on the new WE01X20374 with the flat side of the timer shaft, then press the new knob firmly onto the shaft until it's fully seated. Restore power and test that the knob turns the timer setting correctly through its full range, confirming the dryer starts and progresses through the cycle as expected. Tools needed: none typically required.
Frequently Asked Questions
My knob spins freely or feels loose. Is this the right part?
Yes, this is one of the most common symptoms this knob resolves. If the knob's D-shaped socket has worn out or become stripped, it can no longer grip the timer's shaft properly, letting the knob spin, wobble, or feel loose without actually turning the internal timer mechanism.
I was told my knob replacement threw off my drying time. Is WE01X20374 the fix?
It can be, depending on your model. GE's own support has addressed a case where a similarly-numbered knob, WE1M654, was installed on the wrong model and caused the cycle to cut off before reaching the true "off" position — the customer was told the correct part for their model was WE01X20374. If your timing seems off after installing a different knob, double-check whether WE01X20374 is the correct part for your specific model.
Is this a difficult repair?
No, it's one of the simplest dryer repairs — the old knob pulls straight off the shaft and the new one presses straight on, with no tools needed.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the size, D-shaped shaft fit, and white finish of the original WE01X20374 timer knob used in compatible GE, Hotpoint, and RCA dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WPW10242957 Range Genuine OEM Surface Element
Radiant Surface Element
Radiant surface element, 2000 watts
Replaces Part Numbers: WPW10242957, W10242957, 1873054, 4343098, 8053622, 8272568, 8523695, OEM24070458, AP6017614, PS11750913.
Description: This Radiant Surface Element is an OEM replacement part for specific Whirlpool, Maytag electric ranges and cooktops.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO WE1M652 Dryer Timer Knob
The XPARTCO WE1M652 is an aftermarket replacement timer control knob for GE dryers, and also fits select Hotpoint and Kenmore models. This knob mounts onto the timer's D-shaped shaft and is what you turn to select and adjust the dryer's cycle setting — it's the direct physical interface between you and the timer mechanism inside the control panel.
Finished in white, this knob measures 3" in diameter and accepts a D-shaped shaft. Over time, the knob can crack, break, or simply be lost, or the shaft opening can wear enough that the knob spins freely without actually turning the timer setting. A worn or damaged knob typically shows up as a cracked or broken knob, a knob that won't stay seated on the shaft, a knob that spins without adjusting the cycle, or cycle markings that have become worn and unreadable. It directly replaces 1264289, AH1482196, EA1482196, AP3995164, AGE25175, EAP1482196, PD00024388, PS1482196.
Quick Answer
The XPARTCO WE1M652 Dryer Timer Knob fixes GE, Hotpoint, and Kenmore dryers with a cracked, broken, or missing timer knob, a knob that spins without adjusting the cycle, or worn cycle markings. White, 3" diameter, D-shaped shaft. Replaces 1264289, AH1482196, EA1482196, AP3995164, AGE25175, EAP1482196, PD00024388, PS1482196. Not the same as the similarly-numbered WE1M654 — using the wrong knob can throw off your dryer's cycle timing even though it may physically fit.
Common Problems This Part Fixes
Timer knob cracked, broken, or missing
Knob won't stay seated on the timer shaft
Knob spins freely without adjusting the timer setting
Cycle indicator markings worn or unreadable
Difficulty selecting or adjusting the dryer's cycle setting
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer timer knob directly replaces the following OEM and cross-reference part numbers:
WE1M652, 1264289, AH1482196, EA1482196, AP3995164, AGE25175, EAP1482196, PD00024388, PS1482196
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This timer knob is compatible with select GE dryers, and also fits select Hotpoint and Kenmore dryers built on the GE platform, including model numbers such as HTDX100EM8WW, HTDX100ED6WW, HTDX100EM6WW, HTDX100GM8WW, and HTDX100ED2WW.
Note — not the same as WE1M654: A similarly-numbered knob, WE1M654, is a separate part used on different models. GE's own support has confirmed that installing the wrong knob can throw off your dryer's cycle timing, causing the cycle to cut off before reaching the correct "off" position, even if the wrong knob appears to fit. Always confirm your exact model number before ordering. Contact our support team with your model number if you're unsure which knob your dryer needs.
Key Features
Aftermarket replacement timer control knob — direct interface for selecting the dryer's cycle setting
Resolves "cracked or broken knob," "spins without adjusting," and "won't stay on the shaft" symptoms
White finish, 3" diameter
Accepts a D-shaped shaft
Reinforced metal ring at the stem for improved durability against cracking
Direct drop-in replacement — no tools required for most installations
Replaces 1264289, AH1482196, EA1482196, AP3995164, AGE25175, EAP1482196, PD00024388, PS1482196
Compatible with GE, Hotpoint, and Kenmore dryers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
WE1M652
OEM Part Number
WE1M652
Part Type
Dryer Timer Control Knob
Condition
Aftermarket Replacement
Color
White
Diameter
3"
Dimensions
1-3/4"H x 2-3/4"W x 2-3/4"D
Shaft Type
D-shaped
Reinforcement
Metal ring at stem
Repair Difficulty
Very Easy — no tools typically required
Quantity
1 timer knob
Compatible Brands
GE, Hotpoint, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — The Fit Can Be Snug Disconnect power at the outlet before beginning. Remove the old knob by pulling it straight off the control shaft — no tools are typically required, though some customers have found the fit quite snug and needed a firm, steady pull with some leverage to remove the old knob or seat the new one fully. Align the D-shaped socket on the new WE1M652 with the flat side of the timer shaft, then press the new knob firmly onto the shaft until it's fully seated. Restore power and test that the knob turns the timer setting correctly through its full range, confirming the dryer starts and progresses through the cycle as expected. Tools needed: none typically required.
Frequently Asked Questions
My old knob cracked and I replaced it with a similar-looking one, but now my drying time seems off. What happened?
This is a documented issue when the wrong knob is installed. GE's own support has confirmed that a similarly-numbered knob, WE1M654, is not correct for all models and, if installed on the wrong dryer, causes the cycle to cut off before reaching the true "off" position, throwing off drying time even though the knob may physically fit onto the shaft. If your timing seems off after a knob replacement, double-check that WE1M652 (not WE1M654) is the correct part for your specific model.
My knob spins freely without changing the cycle. Is this the right part?
Yes, this is one of the most common symptoms this knob resolves. If the knob's D-shaped socket has worn out or become stripped, it can no longer grip the timer's shaft properly, letting the knob spin without actually turning the internal timer mechanism.
Is this hard to install?
No, it's one of the simplest dryer repairs — the old knob pulls straight off the shaft and the new one presses straight on, with no tools needed. Some customers have noted the fit is quite snug and takes a bit of extra force to fully seat, but no special skills or hardware are required.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the size, D-shaped shaft fit, and white finish of the original WE1M652 timer knob used in compatible GE, Hotpoint, and Kenmore dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WPW10453947 Washer or Dryer Control Knob
The Genuine OEM WPW10453947 is a factory-original control knob used on both washers and dryers across the Whirlpool platform — the same knob design is shared between select top-load washer cycle-selector dials and dryer cycle/timer dials, depending on the model. It mounts onto the control shaft on the console and is what the user grips to select a wash or dry cycle. Over time these knobs commonly crack, the D-shaped shaft-grip inside wears out and starts spinning freely on the shaft, or the knob's pointer/indicator fades or breaks off.
As the genuine Whirlpool part, it matches the factory shaft profile, detent feel, and indicator marking of the original equipment, so there's no fit or cosmetic mismatch. It directly replaces W10453947, 2304653, AP5607287, AWP50246, EAP3632979, PD00008425, PS3632979. Installs in under 5 minutes with no tools required — it's a simple push-on friction fit in most applications.
Quick Answer
The Genuine OEM WPW10453947 Washer or Dryer Control Knob fixes Whirlpool, Amana, Admiral, Inglis, Roper, Kenmore, Crosley, and Maytag washers and dryers with a cracked, spinning, or missing cycle-selector knob. This is the factory-original Whirlpool knob — not an aftermarket equivalent — and is used on both washer and dryer control panels depending on model. Replaces W10453947, 2304653, AP5607287, AWP50246, EAP3632979, PD00008425, PS3632979. Classic symptom: knob spins freely on the shaft without turning the dial, or won't stay in the selected cycle position.
Common Problems This Part Fixes
Control knob spins freely on the shaft without engaging the dial underneath
Knob is cracked, chipped, or has broken retaining tabs on the back
Knob won't stay pointed at the selected cycle
Indicator marking or pointer on the knob is faded, worn, or broken off
Knob is missing entirely, making it difficult to select a cycle
Knob feels loose or wobbly on the control shaft
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This control knob directly replaces the following OEM and cross-reference part numbers:
W10453947, 2304653, AP5607287, AWP50246, EAP3632979, PD00008425, PS3632979
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This control knob is compatible with select washer and dryer models from the following brands:
Whirlpool washers and dryers (including WTW4616FW1, NTW4700YQ0, and related models)
Amana washers and dryers (select models)
Admiral washers and dryers (select models)
Inglis washers and dryers (select models)
Roper washers and dryers (select models)
Kenmore washers and dryers (select Whirlpool-built models)
Crosley washers and dryers (select models)
Maytag washers and dryers (select Whirlpool-built models)
Note: This same knob is used across hundreds of washer and dryer model numbers on both appliance types. Always verify fit using your appliance's exact model number before ordering, since visually similar knobs with a different shaft profile are used on other platforms. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM control knob — factory-original fit, feel, and appearance
Used on both washer and dryer control panels across the Whirlpool platform
Resolves "knob spins freely," "cracked knob," and "missing cycle indicator" symptoms
Matches original detent feel and cycle-position indicator
Push-on friction fit — no tools required for installation
Replaces W10453947, 2304653, AP5607287, AWP50246, EAP3632979, PD00008425, PS3632979
Compatible with Whirlpool, Amana, Admiral, Inglis, Roper, Kenmore, Crosley, and Maytag washers and dryers
Genuine OEM part — factory-specified materials and markings
Product Specifications
Part Number
WPW10453947
OEM Part Number
WPW10453947
Part Type
Washer / Dryer Control Knob
Condition
Genuine OEM Replacement
Application
Washer or Dryer Cycle-Selector Control Panel
Mounting
Push-on friction fit to control shaft
Compatible Brands
Whirlpool, Amana, Admiral, Inglis, Roper, Kenmore, Crosley, Maytag
Installation Notes
ℹ️ No Tools Required — Unplug Appliance First Disconnect power to the washer or dryer before beginning. Note the current cycle position of the old knob before removing it, so you can align the new one the same way. Grip the old knob firmly and pull straight outward, away from the console, to release it from the friction fit on the shaft. If it's cracked and difficult to grip, work a flat-blade screwdriver gently behind the knob's edge to help pry it free, taking care not to damage the console. Line up the new WPW10453947 knob's D-shaped (or splined) center opening with the flat side of the control shaft, and press straight in until it seats fully against the console. Restore power and test that the knob turns smoothly through each cycle position and the indicator lines up correctly.
Frequently Asked Questions
Is this knob for a washer or a dryer?
Both — this is a shared control knob design used on select Whirlpool-platform washers and dryers, depending on the model. The knob itself is identical; what it controls (wash cycle vs. dry cycle) depends on which appliance and console it's installed in. Confirm your appliance's model number before ordering to make sure this is the correct knob for your specific control panel.
My knob spins freely and doesn't change the cycle — is this the fix?
Yes, in most cases. This happens when the knob's internal shaft-grip (the D-shaped or splined opening that mates with the control shaft) wears out or cracks, so the knob spins independently of the shaft underneath it. Replacing the knob restores a snug grip on the shaft so turning it actually moves the selector.
Do I need any tools to install this?
No — it's a simple push-on friction fit. Pull the old knob straight off the shaft (a flat-blade screwdriver can help pry a stuck or cracked one loose) and press the new one on, matching the shaft's flat side to the knob's opening. No screws or fasteners are involved.
Is this a genuine Whirlpool part or an aftermarket equivalent?
This is the genuine, factory-original Whirlpool knob — not an aftermarket equivalent. It matches the original shaft profile, detent feel, and cycle-indicator markings, so there's no mismatch in fit or appearance versus the original equipment.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine Whirlpool OEM Part ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WPW10411934 Range Genuine OEM Surface Element Switch – Compatible with Whirlpool, Maytag & KitchenAid Ranges
Product Description
Restore precise burner temperature control with the WPW10411934 Range Genuine OEM Surface Element Switch. This Genuine OEM switch is engineered by the original manufacturer to control the heat output of electric surface elements. A faulty surface element switch can cause burners to stay on high, not heat at all, or cycle inconsistently. Replacing it with this authentic OEM part ensures proper electrical performance, safe operation, and factory-level reliability.
This part is a Genuine OEM component, manufactured to exact specifications for fit, durability, and long-term performance.
Replaces Part Numbers
WPW10411934, W10411934, 4446483, PD00033778, EAP11754410, AP6021089, PS11754410.
Compatibility
This Genuine OEM surface element switch fits select Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore (Whirlpool-manufactured) electric ranges.
Common compatible models include (but are not limited to):
Whirlpool WFE515S0ES
Maytag MER8800FZ
KitchenAid KERA205PB
Always verify your range’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🏭 Genuine OEM Part – Manufactured to original factory specifications
🔥 Accurate Heat Regulation – Restores proper burner temperature control
⚡ Safe Electrical Operation – Designed for correct voltage and load handling
🎛️ Smooth Adjustment – Ensures responsive burner control
🔧 Exact Fit & Direct Replacement – No modifications required
📐 Product Specification
Part Number: WPW10411934
Component Type: Surface Element Control Switch
Voltage: 240V
Application: Electric range surface burner control
Mounting: Shaft-mounted behind control panel
OEM Status: Genuine OEM
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Disconnect power at the breaker before servicing the range to avoid electrical shock.
Basic Steps:
Turn off power to the range at the breaker.
Remove the control knob and access the control panel.
Label and disconnect wires from the old switch.
Remove mounting screws and remove the old switch.
Install the new WPW10411934 Genuine OEM switch.
Reconnect wiring, reassemble the control panel, and restore power.
Test burner operation.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🏭 Genuine OEM Appliance Part
🚚 Free Shipping on All Orders
🔄 30-Day Return Policy
Restore factory-level burner control and safe cooking performance — Add to Cart Now with confidence!
WE01X21167 Dryer Genuine Control Knob
Fits Specific GE Dryer Models.
Replaces Part Numbers: WE01X21167, WH11X23474, 4392876, AP5986370, PS11725223.
Description: This Knob is a Genuine OEM part for specific GE dryer models. This component allows you to select various dryer settings and cycles by turning the control mechanism. It ensures that users can easily adjust and operate the dryer according to their laundry needs. Causes of a bad knob can include wear and tear from frequent use, accidental damage from dropping or mishandling, or internal cracking and splitting that compromise its functionality.
