(2 Pack) W10290350CM Porcelain 8" Drip Pan
Porcelain drip bowl (also called a drip pan) for 8 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner.
8" Porcelain pan.
Fits Whirlpool range.
Replaces Part Numbers: WPW10290350, W10290350, 04100393, 04100528, 059012B, 14221564, 1557767, 305839B, 308938B, 3169205, 3169205A, 3169205BULK, 3169205P, 7725P023-60, 93159205B, 93169205, 93169205b, D8576204, W10290350BU, Y04100393, Y04100528, Y059012B, AP6018808, PS11752111.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
(2 Pack) WB31X5010CM 6" Burner Drip Pan
Chrome drip bowl (also called a drip pan) for 6 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner.
6" Chrome pan/ring.
Fits GE, Hotpoint range.
Replaces Part Numbers: WB31X5010, 4, AH244466, DP101, EA244466, PM32X0101, PM32X101, SGP400, WB31X5010A, WB31X5010B, WB31X5010R, AP2028082, PS244466.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WB31X5013CM 6" Burner Trim Ring
6" Chrome ring.
Fits GE, Hotpoint range.
Replaces Part Numbers: WB31X5013, 340525, 5, WB31X0056, WB31X5008, WB31X5013A, WB31X5013B, WB31X5013DS, WB31X5013R, WB31X5015, WB31X56, AH244475, EA244475, AP2028085, PS244475.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
(2 Pack) WB31X5013CM 6" Burner Trim Ring
6" Chrome ring.
Fits GE, Hotpoint range.
Replaces Part Numbers: WB31X5013, 340525, 5, WB31X0056, WB31X5008, WB31X5013A, WB31X5013B, WB31X5013DS, WB31X5013R, WB31X5015, WB31X56, AH244475, EA244475, AP2028085, PS244475.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
AAS73229402 Genuine OEM LG Washer Tub to Pump Hose
The AAS73229402 is a Genuine OEM LG replacement tub-to-pump hose (also called a drain pump bellows assembly) compatible with a wide range of LG and Kenmore washing machines. This hose carries water from the outer tub to the drain pump, allowing the used wash and rinse water to properly empty from the tub during the drain cycle. It features flexible bellows that let the hose expand and contract as the tub moves during operation, while forming a watertight connection between the tub and the pump. When this hose cracks, splits, or develops porous areas, water leaks out during draining — typically showing up as a puddle under the washer.
Made of durable rubber engineered to resist wear through years of flexing and water exposure. As a Genuine OEM part manufactured by LG to factory specifications, the AAS73229402 directly replaces AP6973533, AGM76891101, AHA75673401, and AEM74073303. This is one of those repairs where using the exact OEM hose matters — the correct fit and internal diameter ensure proper drainage and a leak-free seal, which unverified substitute hoses can't always guarantee. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The AAS73229402 Genuine OEM LG Washer Tub to Pump Hose fixes LG and Kenmore washers that leak water under the machine during or after draining, don't fully drain the tub, leave standing water, or develop mold in the pump housing. Tub-to-pump hose / drain pump bellows assembly with flexible bellows — carries water from the outer tub to the drain pump. Genuine OEM. Replaces AP6973533, AGM76891101, AHA75673401, AEM74073303. Compatible with LG front-load and top-load washers plus select Kenmore models. Use the exact OEM hose for correct fit and diameter.
Common Problems This Part Fixes
Water leaking or puddling under the washer during or after the drain cycle
Washer not fully draining — water left in the tub after the cycle
Excess water left in the tub requiring additional emptying
Drips or leaks from the tub-to-pump connection
Standing water or mold growth inside the pump housing
Hose visibly cracked, split, or showing porous/worn areas
Hose no longer staying securely attached to the tub or pump
Musty/moldy smell from water trapped by a leaking or sagging hose
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This tub-to-pump hose directly replaces the following OEM and cross-reference part numbers:
AAS73229402, AAS73229405, AAS73229403, AGM76891101, AP6973533, PS12738715, ALG52189, PD00071151.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility. For a proper leak-free seal, use the exact OEM hose rather than an unverified substitute — the correct fit and internal diameter matter.
Compatibility
This tub-to-pump hose is compatible with select LG and Kenmore washing machines, including front-load and top-load models:
LG front-load washers — select WM-series models
LG top-load washers — select WT-series models (including WT7305CV and related)
LG washers using the AAS73229402 tub-to-pump bellows hose (verify with your parts diagram)
Kenmore / Sears washers — select LG-built models
Because LG uses several different tub-to-pump and drain hoses across its washer lineup, always verify your appliance model number before ordering to confirm the AAS73229402 is the correct hose for your machine. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by LG to factory specifications — guaranteed fit and performance
Tub-to-pump hose (drain pump bellows assembly) — carries water from the outer tub to the drain pump for proper draining
Flexible bellows design — expands and contracts as the tub moves during operation while keeping a watertight seal
Resolves "leaking under the washer," "won't fully drain," "standing water," and "mold in pump housing" symptoms when caused by a failed hose
Durable rubber construction engineered to resist cracking, splitting, and porosity over years of use
Correct OEM fit and internal diameter for proper drainage and a leak-free seal
Replaces AP6973533, AGM76891101, AHA75673401, and AEM74073303
Compatible with LG front-load (WM-series) and top-load (WT-series) washers, plus select Kenmore LG-built models
Genuine OEM — the exact part sourced from the manufacturer
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
AAS73229402
Part Type
Washer Tub-to-Pump Hose (Drain Pump Bellows Assembly)
Condition
Genuine OEM
Application
Front-Load & Top-Load Washing Machines (LG platform)
Function
Carries water from the outer tub to the drain pump
Design
Flexible bellows (expands/contracts with tub movement)
Material
Rubber
Location
Between the outer tub and the drain pump
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Work Gloves — Drain the Tub First Unplug the washer and shut off the water supply before beginning. Wear work gloves to protect your hands. Drain any excess water from the washer before starting — the tub and hose still hold water that will spill out when you disconnect the hose, so have towels and a shallow pan ready. Pull the washer away from the wall to access the panels (on many models you can leave the water supply hoses connected and just unplug the electrical cord). The hose is accessed by removing the rear panel: remove the screws (often 4) securing the rear panel to the back of the washer and set the panel aside. On some front-load models, the top panel is removed instead — remove the top panel bracket screws, slide the top toward the rear, and lift it off. Locate the tub-to-pump hose connecting the outer tub to the drain pump. Photograph the hose routing and clamp positions before disconnecting. Use slip-joint pliers to squeeze and slide back the spring hose clamps at each end of the hose (and loosen any center clamp with a screwdriver). Pull the old hose straight off both connections. Note: on some models the clamp on the pump differs from other nearby hose clamps — mark them so you reinstall each in the right spot. Install the new AAS73229402 hose, seating it fully onto both the tub and pump fittings, and secure the clamps in their original positions using the existing clamps. Make sure the hose is seated all the way on and the clamps are secure — a hose that isn't fully seated will leak and make a large mess. Reinstall the panel, push the washer back into place, restore power and water, and run a rinse/spin cycle to test drainage and check for leaks. Tip: some people find it easier to tip the washer up a few inches on a couple of 2x4s for better access. Tools needed: Phillips screwdriver, slip-joint pliers, towels, shallow pan, work gloves.
Frequently Asked Questions
There's a puddle under my LG washer — is this hose the cause?
It's one of the most common causes, yes. The tub-to-pump hose carries water under pressure from the tub to the drain pump, so when it cracks, splits, or develops a porous spot, water escapes during the drain cycle and puddles under the machine. Before ordering, inspect the hose and its connections: pull the washer out, remove the rear (or top) panel, and look for visible cracks, splits, or wet spots along the hose and at the clamps. Also check the drain pump itself and the other hoses, since a leak can come from several nearby points. If the tub-to-pump hose shows damage or the leak traces to it, this is the correct part. Many people replace the drain pump and hoses together as a "while you're in there" repair.
What's the difference between the tub-to-pump hose and the drain hose?
They're two different hoses. The tub-to-pump hose (this part, AAS73229402) is an internal hose that carries water from the outer tub to the drain pump inside the washer cabinet. The drain hose is the external hose that carries the water from the pump out of the washer to your standpipe, sink, or drain. If your leak is inside the cabinet or under the machine, it's often the internal tub-to-pump hose. If water is leaking where the external hose meets your drain, that's the drain hose. Make sure you're ordering the right one for your symptom.
Can I use an aftermarket substitute hose instead?
We recommend the exact OEM hose. Tub-to-pump hoses have to match the specific fit and internal diameter of your washer's tub and pump fittings to seal properly and drain correctly. Appliance technicians specifically caution against using unverified substitute hoses on LG washers because an incorrect fit or diameter can cause leaks or drainage problems. The AAS73229402 is the genuine OEM part with the correct dimensions for the models it fits, giving you a reliable, leak-free seal. If you're unsure whether this is the right hose for your model, send us your model number and we'll confirm.
My washer won't drain fully and leaves standing water — is it this hose?
It can be, though incomplete draining has a few possible causes. A tub-to-pump hose that has partially collapsed, kinked, or is leaking can reduce the water flow to the pump and leave water behind. But standing water is also commonly caused by a clogged pump, a blocked hose, or a failing drain pump. Inspect the tub-to-pump hose for kinks, sagging, cracks, and blockages first. Also check the drain pump inlet and clean out any debris. If the hose is damaged, replacing it with the AAS73229402 restores proper flow. If the hose is fine, the drain pump or a blockage is the more likely cause.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by LG to factory specifications. It is the exact same tub-to-pump hose (drain pump bellows assembly) installed in compatible LG and Kenmore LG-built washers from the factory — guaranteed fit, materials, and performance, sourced directly from the manufacturer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 330031 Surface Burner Receptacle Kit
The XPARTCO 330031 is an aftermarket replacement surface burner receptacle kit, also called a surface element receptacle or terminal block kit, for Whirlpool-built electric ranges and cooktops. The receptacle is the plug-in block that connects the range's wire harness to the surface element. When it burns, loosens, or corrodes, the element can heat poorly, heat intermittently, or stop heating entirely, even though the element itself is good.
This kit is a direct-fit aftermarket replacement for the Whirlpool 330031 and the many older numbers that it replaces. If a burner has stopped working, test the element in another burner socket first. If the element works there, the receptacle is the likely cause.
Quick Answer
The XPARTCO 330031 Receptacle Kit fixes an electric range or cooktop whose surface element won't heat, heats intermittently, or has a burned or damaged socket. Classic symptom: a known-good element works in another burner socket but not in this one.
Common Problems This Part Fixes
Surface element will not heat
Element heats intermittently
Burned, melted, or corroded receptacle block
Loose element that doesn't seat firmly in the socket
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This receptacle kit directly replaces the following part numbers:
330031, AP3075808, W10841094, 14200040, 14200233, 14203070, 14205001, 14205727, 14209631, 14210007, 14254131, 3374, 42147, 42153, 4335480, 5303935058, 550226, 71930, 74-06-132, 74-06-190, 766339, 99989649, 9E28000199, AH340571, EA340571, FSP330031, PS340571, R0157526, R0167091, R300, TS300, W10116799, W10116803, WB17X210, Y0042147, Y0042153, Y0045536, Y0045546, Y0051088, Y0054794, Y0067069, Y0071930, Y0071931, Y0075054, Y0086726, Y0088866, Y0089227, Y0089291, Y0089336, Y0090094, Y0300678, Y0308306, Y89336, YC2711501, YC2716501, YR0181149, 5303935058, 5301167733, 08002879, 08002916, 08002917, 08002918, 08002919, 08008697, 08011962, 08012830, 08012865, 09957075, 12871, 318112500, 318366400, 42822, 53-003, 709T026P01, 709T026S01, 709T026S02, 709T034P01, 709T045P01, 868464, 9175, A1505240, A1505979, G54972, G55667, K001167470, K001315483, K001319226, K1167204, K1167205, K1167470, K1310415, K1311332, K1312169, K1312179, K1312800, K1315200, K1315483, K1319226, K1323982, K5043104, K5043105, K5137801, PS470125, R201A, RR104, RR109, RR110, RR117, S5303310284, AP2591744, WB17X5091, AP2021538, 245919, AH232634, EA232634, PS232634, R117
These are the main numbers that appear across retailer cross-reference lists. Retailers list many more older numbers for this kit. Confirm against your range's parts diagram, or contact our support team, if your range calls out a different number.
Compatibility
This receptacle kit is listed for electric Whirlpool, Amana, Roper, and Kenmore ranges and cooktops, including these Kenmore examples:
Kenmore 101936630, 101936634, 101938630, 101938635
Kenmore 119647811, 119648811, 119900871, 119901871
Note: The models above are a small sample of a longer list, not a full list. Receptacle styles differ between ranges, and some buyers report terminals that differ from their original. Compare this kit to your old receptacle, and contact our support team with your model number to verify fit before ordering.
Key Features
Direct-fit aftermarket receptacle kit for the 330031 surface element receptacle
Connects the range's wire harness to the surface element
Kit includes the receptacle block, mounting brackets, high-temperature wire leads, and heat-shrink insulation
Resolves no-heat and intermittent-heat problems caused by a burned receptacle
Typically a 15 to 30 minute repair
Product Specifications
Part Number
XP330031
OEM Part Number
330031
Part Type
Surface Burner (Element) Receptacle Kit
Condition
Aftermarket Replacement
Quantity
1 kit
Application
Electric Ranges & Cooktops
Installation Notes
⚠️ Unplug Power Before Installing Unplug the range or switch off its circuit breaker before beginning, and wear work gloves. Remove the surface element and drip pan, lift the range top, and note which wire goes to which terminal before disconnecting them. Unscrew the old receptacle, fit the new one with the bracket that matches your receptacle, and attach the wires to the same terminals. Insulate the connections with the heat-shrink supplied, then reassemble and test.
Frequently Asked Questions
One burner won't heat. Is this the part I need?
Try the element in another burner socket first. If it heats there, the receptacle or its wiring is the likely cause, and this kit is the repair. If it doesn't heat in the other socket, the element is the problem.
The kit comes with two brackets. Which one do I use?
Use only the bracket that matches your receptacle, as shown in the parts diagram or on your old receptacle.
Is this a plug-in part for any electric range?
No. It is listed for Whirlpool, Amana, Roper, and Kenmore ranges and cooktops, and receptacle styles differ between models. We have not confirmed fit for GE, Hotpoint, or other brands. Compare it to your old receptacle, or contact our support team with your model number.
Will this fit my range?
It is listed for many Whirlpool-built ranges and cooktops, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
S48D21 8" Range Surface Element
Product Title
Aftermarket S48D21 8" Range Surface Element - Compatible with Whirlpool, Maytag, Kenmore, Jenn-Air, Amana Electric Ranges
Product Description
Revive your electric range’s cooking performance with the Aftermarket S48D21 8" Range Surface Element from Parts-O-Matic. This high-quality aftermarket burner element replaces the original S48D21, delivering 2100 watts at 240V with a 4-turn coil design for efficient and even heating. Ideal for select Whirlpool, Maytag, Kenmore, Jenn-Air, Amana, and other brand electric ranges, it addresses issues like uneven heating, slow warm-up, or non-functional burners. Enjoy free shipping on all orders at Parts-O-Matic!
Key Features:
✅ Broad Compatibility: Fits select Whirlpool, Maytag, Kenmore, Jenn-Air, Amana, and other electric range models.
🔥 Efficient Heating: 8" diameter, 4-turn coil delivers 2100 watts at 240V for consistent, even cooking.
💰 Cost-Effective Alternative: Aftermarket part offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Plug-in design with Y-style bracket; requires no tools and takes 5–10 minutes to install.
🛡️ Fixes Common Issues: Resolves uneven heating, slow warm-up, or burners that fail to heat.
Compatibility:
Compatible with models including but not limited to:
Whirlpool: RF110AXSQ0, RF262LXSB, RF365PXKW0
Maytag: MER4110AAH, MER4120AAQ
Kenmore: 629.4297, 629.60003600 (pre-2004 models)
Jenn-Air: JES9750AAB
Amana: AER5511AAQ
Replaces part numbers: TJ90SP21MA, 14215226, 1938283, 309917, 403782, 404110, 406000, 814154, ERS48D21, SE302, SP21MA, SU214, SU302, TS4D8221, TS4D8221PB, TS4D8221SR, TS4D8221WI, YSP21MA, AP4503257.
Verify compatibility with your appliance brand and model number, please contact Parts-O-Matic support for assistance.
Installation Notes:
Tools Needed: None for standard installation; a flathead screwdriver may help for stubborn connections.
Safety First: Unplug the range before installation to avoid electrical shock.
Steps: Remove the old burner element by gently pulling it from the receptacle, align the Y-style bracket of the new S48D21 element, and plug it into the socket. Ensure the element sits flat in the drip pan. If the burner is not level, adjust the connection bolts to ensure they are parallel and push down gently. Installation takes 5–10 minutes. Note: A slight burning smell during first use is normal due to a protective coating; this will dissipate after 15–20 minutes.
Download our installation guide or watch our YouTube tutorial for step-by-step instructions.
Shop Parts-O-Matic for high-quality aftermarket appliance parts with free shipping on all orders and a 30-day return policy. Restore your range’s cooking performance today!
Add to cart now for an affordable fix with free shipping on your entire order!
XPARTCO DD31-00005A Dishwasher Drain Pump Motor
The XPARTCO DD31-00005A is an aftermarket replacement drain pump motor for Samsung dishwashers. This pump uses an internal impeller to force wastewater out of the tub and through the drain hose during the drain phase of the wash cycle — it's the component doing the physical work every time your dishwasher empties itself between cycle stages and at the end of the wash.
Rated 120V, 0.8A. Over time, the impeller can wear down, debris can jam the motor, or the motor windings themselves can fail electrically. A failing drain pump produces a very recognizable pattern: standing water left in the tub after a cycle finishes, water leaking from underneath the dishwasher, unusually loud or grinding noise during the drain phase, or a pump that audibly tries to run for a moment and then shuts off right away without actually clearing the water. It directly replaces AP4342621 and PS4222308.
Quick Answer
The XPARTCO DD31-00005A Dishwasher Drain Pump Motor fixes Samsung dishwashers that won't drain, leave standing water in the tub, leak underneath the unit, or run unusually noisy during the drain phase. 120V, 0.8A. Replaces AP4342621, PS4222308. This is the drain pump — not the same part as the wash/circulation pump (DD31-00004B), which handles spraying water during the wash itself rather than draining it afterward.
Common Problems This Part Fixes
Dishwasher not draining — standing water left in the tub after a cycle
Water leaking from underneath the dishwasher
Unusually loud, grinding, or strange noise during the drain phase
Pump that tries to run briefly, then shuts off right away without draining
Dishwasher running noisily overall
Cycle that stalls or won't advance past the drain step
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher drain pump motor directly replaces the following OEM and cross-reference part numbers:
DD31-00005A, 1550731, DW0005A, AP4342621, ASM35435 PD00002014, PS4222308
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain pump motor is compatible with select Samsung dishwashers, including model numbers such as:
DMR57LFB, DMR57LFS, DMR57LFW
DMR77LHB, DMR77LHS, DMR77LHW
DMR78AHB, DMR78AHS, DMR78AHW
DMT300RFB, DMT300RFS, DMT300RFW
DMT400RHB, DMT400RHS, DMT400RHW
DMT800RHB, DMT800RHS, DMT800RHW
Note — drain pump, not wash pump: This is the drain pump, which removes wastewater from the tub. It is a different part from the DD31-00004B wash/circulation pump motor, which sprays water through the spray arms during the wash itself. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which pump your dishwasher needs.
Key Features
Aftermarket replacement drain pump motor — removes wastewater from the tub during the drain phase
Resolves "not draining," "standing water," "leaking underneath," and "noisy drain phase" symptoms caused by pump failure
Impeller-driven design for efficient water removal through the drain hose
Rated 120V, 0.8A
Direct drop-in replacement — matches the original mounting and hose connections
Replaces AP4342621 and PS4222308
Compatible with a range of Samsung dishwasher models
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
DD31-00005A
OEM Part Number
DD31-00005A
Part Type
Dishwasher Drain Pump Motor
Condition
Aftermarket Replacement
Brand
Samsung
Function
Removes wastewater from the tub during the drain phase
Voltage
120V
Amperage
0.8 A
Related Part
DD31-00004B wash/circulation pump (different function, sold separately)
Repair Difficulty
Moderate — tight working space under the unit
Quantity
1 drain pump motor
Compatible Brand
Samsung
Installation Notes
⚠️ Unplug Dishwasher And Shut Off Water Supply Before Starting — Remove Standing Water First Unplug the dishwasher and shut off the water supply before beginning. Wear work gloves. If there's standing water left in the tub from the original failure, remove as much as possible by hand with a cup or towel before starting the repair. Access to the drain pump is typically from underneath the unit, which can mean a tight working space — pulling the dishwasher partially out from under the counter, or working from the front after removing the lower access panel, makes this considerably easier depending on your installation. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and the drain hose connections from the old pump, remove its mounting screws or clips, and pull it free. Install the new DD31-00005A pump in the same position, reconnect the drain hose connections securely, and reconnect the electrical connector fully. Restore the water supply and power, then run a cycle and check underneath for leaks while confirming the tub drains completely at the end. Tools needed: Phillips screwdriver, pliers, towels or a small cup for removing standing water, work gloves.
Frequently Asked Questions
My dishwasher pump tries to run for a second, then shuts off. Is that the drain pump?
Yes, this is a documented symptom of a failing drain pump motor — one customer described exactly this pattern, where the pump attempted to run and then shut off right away without actually clearing the standing water. This typically points to a motor that's jammed, worn, or electrically failing rather than a clog, since a simple clog usually lets the motor keep running (just ineffectively) rather than shutting off immediately.
Access to my drain pump is really tight. Is that normal?
Yes, this is a common challenge with under-counter dishwasher installations — the drain pump often sits low and toward the back, and reaching it can mean working in a cramped space regardless of the model. Removing standing water first and having patience with the process makes a real difference, and pulling the unit partially forward, if your installation allows it, can improve access significantly.
Is this the same as the wash pump on my dishwasher?
No. This DD31-00005A is specifically the drain pump, which removes wastewater from the tub. Your dishwasher's separate wash/circulation pump (DD31-00004B) is what sprays water through the spray arms during the actual wash portion of the cycle. If your dishwasher isn't cleaning dishes well but drains fine, the wash pump — not this drain pump — is more likely the issue.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical rating, impeller design, and mounting configuration of the original DD31-00005A drain pump motor used in compatible Samsung dishwashers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine Frigidaire OEM
Frigidaire 5304533220 Washer Water Fill Hose Assembly
Genuine OEM internal valve-to-tub fill hose for select Frigidaire-built laundry centers and washer/dryer combination units.
Product Overview
The Frigidaire 5304533220 Washer Water Fill Hose Assembly is a Genuine OEM internal fill hose used to route incoming water from the washer water inlet valve to the wash tub on compatible laundry-center models.
This is the valve-to-tub hose inside the appliance. It is not the external hot/cold household water-supply hose that connects the appliance to the wall faucets.
Quick Answer
5304533220 is the Genuine Frigidaire OEM valve-to-tub washer fill hose. It replaces earlier Frigidaire numbers 5304508358 and 809191901 and is used on select Frigidaire, Kenmore, Crosley, and other Electrolux-manufactured laundry centers.
Common Problems This Part May Fix
Water leaking inside the washer cabinet during fill
Cracked, split, hardened, or deteriorated fill hose
Leak between the inlet-valve outlet and wash tub
Loose or damaged internal water-fill connection
Water dripping from the valve-to-tub hose during operation
Replaces and Cross-References
5304533220, 5304508358, 809191901, AFR20016, AP7194866, EAP11775692, PD00076846, PS16745853
Cross-reference numbers are provided for identification. Always verify the full appliance model number before ordering.
Compatibility
Confirmed applications include select Frigidaire-built laundry centers and washer/dryer combinations such as:
FLCE7523AW0
FLCE7523AW1
FLCE7522AW1
FLCE7522AW4
FFLE3900UW0
FFLE3900UW1
FFLG3900UW0
FFLE3911QW1
CFLE3900UW0
41761712511
41761732810
41771732810
Important: This is only a partial compatibility list. Confirm the complete model number from the appliance rating label before purchase.
Key Features
Genuine Frigidaire OEM replacement part
Internal valve-to-tub fill hose
Routes fill water from the inlet valve to the washer tub
Direct replacement for 5304508358 and 809191901
Factory-style fit for compatible laundry centers
Used on select Frigidaire, Kenmore, and related Electrolux-built models
Product Specifications
Manufacturer Part Number
5304533220
Brand
Frigidaire
Part Type
Washer Internal Water Fill Hose
Hose Location
Water Inlet Valve to Wash Tub
OEM Status
Genuine OEM
Appliance Type
Laundry Center / Washer-Dryer Combo
Condition
New
External Supply Hose?
No — this is an internal appliance hose
Installation Notes
Disconnect electrical power to the appliance before service.
Shut off both household water-supply valves.
Access the washer inlet-valve and tub-fill connection according to the model-specific service procedure.
Place towels or a shallow pan below the hose connections to catch residual water.
Release the clamps and remove the old hose without damaging the valve outlet or tub fitting.
Install the new hose fully onto both fittings and reinstall the clamps in their original positions.
Restore water and inspect carefully for leaks before returning the appliance to service.
Diagnostic tip: If water is leaking during fill, inspect the hose, clamps, inlet valve, and tub connection before replacing parts. A leak from the external household supply hose requires a different part.
Frequently Asked Questions
Is 5304533220 a Genuine OEM part?
Yes. It is a Genuine Frigidaire OEM fill hose.
Does 5304533220 replace 5304508358?
Yes. 5304533220 supersedes 5304508358 and 809191901.
Is this the hose that connects the washer to the wall faucet?
No. This is an internal valve-to-tub fill hose located inside the laundry center.
Can this part correct a washer leak?
Yes, if the leak is caused by a cracked or damaged valve-to-tub fill hose or its connection. Inspect all nearby fittings and clamps before ordering.
Shop With Confidence
Verify your complete laundry-center model number before ordering. This listing is for the Genuine Frigidaire OEM internal valve-to-tub fill hose.
Genuine Frigidaire OEMValve-to-Tub Fill HoseCompatibility SupportFast U.S. Shipping
(4 Pack) XPARTCO 330031 Surface Burner Receptacle Kit
The XPARTCO 330031 is a pack of 4 aftermarket replacement surface burner receptacle kits, also called surface element receptacles or terminal block kits, for Whirlpool-built electric ranges and cooktops. Each receptacle is the plug-in block that connects the range's wire harness to the surface element. When it burns, loosens, or corrodes, the element can heat poorly, heat intermittently, or stop heating entirely, even though the element itself is good.
These kits are direct-fit aftermarket replacements for the Whirlpool 330031 and the many older numbers that it replaces. A 4-pack covers every burner on a standard four-burner range. If a burner has stopped working, test the element in another burner socket first. If the element works there, the receptacle is the likely cause.
Quick Answer
The (4 Pack) XPARTCO 330031 Receptacle Kit fixes an electric range or cooktop whose surface element won't heat, heats intermittently, or has a burned or damaged socket. Classic symptom: a known-good element works in another burner socket but not in this one.
Common Problems This Part Fixes
Surface element will not heat
Element heats intermittently
Burned, melted, or corroded receptacle block
Loose element that doesn't seat firmly in the socket
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
These receptacle kits directly replace the following part numbers:
330031, 330031A, 12001673, 0089336, B5015402, C2711501, C2716501, M5D117, M5D71, R0157519, R0157526, R0157932, R0167091, R0167117, W10116799, W10116803, WB17X210, RR110
These are the main numbers that appear across retailer cross-reference lists. Retailers list many more older numbers for this kit. Confirm against your range's parts diagram, or contact our support team, if your range calls out a different number.
Compatibility
These receptacle kits are listed for electric Whirlpool, Amana, Roper, and Kenmore ranges and cooktops, including these Kenmore examples:
Kenmore 101936630, 101936634, 101938630, 101938635
Kenmore 119647811, 119648811, 119900871, 119901871
Note: The models above are a small sample of a longer list, not a full list. Receptacle styles differ between ranges, and some buyers report terminals that differ from their original. Compare the kit to your old receptacle, and contact our support team with your model number to verify fit before ordering.
Key Features
Pack of 4 direct-fit aftermarket receptacle kits for the 330031 surface element receptacle
Connects the range's wire harness to the surface element
Each kit includes the receptacle block, mounting brackets, high-temperature wire leads, and heat-shrink insulation
Resolves no-heat and intermittent-heat problems caused by a burned receptacle
Typically a 15 to 30 minute repair per burner
Product Specifications
Part Number
XP330031
OEM Part Number
330031
Part Type
Surface Burner (Element) Receptacle Kit
Condition
Aftermarket Replacement
Quantity
4 Kits
Application
Electric Ranges & Cooktops
Installation Notes
⚠️ Unplug Power Before Installing
Unplug the range or switch off its circuit breaker before beginning, and wear work gloves. Remove the surface element and drip pan, lift the range top, and note which wire goes to which terminal before disconnecting them. Unscrew the old receptacle, fit the new one with the bracket that matches your receptacle, and attach the wires to the same terminals. Insulate the connections with the heat-shrink supplied, then reassemble and test.
Frequently Asked Questions
One burner won't heat. Is this the part I need?
Try the element in another burner socket first. If it heats there, the receptacle or its wiring is the likely cause, and this kit is the repair. If it doesn't heat in the other socket, the element is the problem.
The kit comes with two brackets. Which one do I use?
Use only the bracket that matches your receptacle, as shown in the parts diagram or on your old receptacle.
Is this a plug-in part for any electric range?
No. It is listed for Whirlpool, Amana, Roper, and Kenmore ranges and cooktops, and receptacle styles differ between models. We have not confirmed fit for GE, Hotpoint, or other brands. Compare it to your old receptacle, or contact our support team with your model number.
How many kits come in this order?
Each order includes 4 receptacle kits.
Will this fit my range?
It is listed for many Whirlpool-built ranges and cooktops, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping
✓ Quality Aftermarket Parts
✓ Compatibility Support
✓ Secure Checkout
Genuine OEM Whirlpool 330031 Burner Element Receptacle Kit
The Genuine OEM Whirlpool 330031 is a surface burner receptacle kit, also called a surface element receptacle or terminal block kit, for Whirlpool-built electric ranges and cooktops. The receptacle is the plug-in block that connects the range's wire harness to the surface element. When it burns, loosens, or corrodes, the element can heat poorly, heat intermittently, or stop heating entirely, even though the element itself is good.
This is the original Whirlpool kit, and it replaces many older numbers. If a burner has stopped working, test the element in another burner socket first. If the element works there, the receptacle is the likely cause.
Quick Answer
The Genuine OEM Whirlpool 330031 Receptacle Kit fixes an electric range or cooktop whose surface element won't heat, heats intermittently, or has a burned or damaged socket. Classic symptom: a known-good element works in another burner socket but not in this one.
Common Problems This Part Fixes
Surface element will not heat
Element heats intermittently
Burned, melted, or corroded receptacle block
Loose element that doesn't seat firmly in the socket
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This receptacle kit directly replaces the following part numbers:
330031, AP3075808, W10841094, 14200040, 14200233, 14203070, 14205001, 14205727, 14209631, 14210007, 14254131, 3374, 42147, 42153, 4335480, 5303935058, 550226, 71930, 74-06-132, 74-06-190, 766339, 99989649, 9E28000199, AH340571, EA340571, FSP330031, PS340571, R0157526, R0167091, R300, TS300, W10116799, W10116803, WB17X210, Y0042147, Y0042153, Y0045536, Y0045546, Y0051088, Y0054794, Y0067069, Y0071930, Y0071931, Y0075054, Y0086726, Y0088866, Y0089227, Y0089291, Y0089336, Y0090094, Y0300678, Y0308306, Y89336, YC2711501, YC2716501, YR0181149, 5303935058, 5301167733, 08002879, 08002916, 08002917, 08002918, 08002919, 08008697, 08011962, 08012830, 08012865, 09957075, 12871, 318112500, 318366400, 42822, 53-003, 709T026P01, 709T026S01, 709T026S02, 709T034P01, 709T045P01, 868464, 9175, A1505240, A1505979, G54972, G55667, K001167470, K001315483, K001319226, K1167204, K1167205, K1167470, K1310415, K1311332, K1312169, K1312179, K1312800, K1315200, K1315483, K1319226, K1323982, K5043104, K5043105, K5137801, PS470125, R201A, RR104, RR109, RR110, RR117, S5303310284, AP2591744, WB17X5091, AP2021538, 245919, AH232634, EA232634, PS232634, R117
These are the main numbers that appear across retailer cross-reference lists. Retailers list many more older numbers for this kit. Confirm against your range's parts diagram, or contact our support team, if your range calls out a different number.
Compatibility
This receptacle kit is listed for electric Whirlpool, Amana, Roper, and Kenmore ranges and cooktops, including these Kenmore examples:
Kenmore 101936630, 101936634, 101938630, 101938635
Kenmore 119647811, 119648811, 119900871, 119901871
Note: The models above are a small sample of a longer list, not a full list. Receptacle styles differ between ranges, and some buyers report terminals that differ from their original. Compare this kit to your old receptacle, and contact our support team with your model number to verify fit before ordering.
Key Features
Genuine OEM Whirlpool surface element receptacle kit
Connects the range's wire harness to the surface element
Kit includes the receptacle block, mounting brackets, high-temperature wire leads, and heat-shrink insulation
Resolves no-heat and intermittent-heat problems caused by a burned receptacle
Typically a 15 to 30 minute repair
Product Specifications
Part Number
330031
OEM Part Number
330031
Part Type
Surface Burner (Element) Receptacle Kit
Condition
Genuine OEM
Quantity
1 kit
Application
Electric Ranges & Cooktops
Installation Notes
⚠️ Unplug Power Before Installing Unplug the range or switch off its circuit breaker before beginning, and wear work gloves. Remove the surface element and drip pan, lift the range top, and note which wire goes to which terminal before disconnecting them. Unscrew the old receptacle, fit the new one with the bracket that matches your receptacle, and attach the wires to the same terminals. Insulate the connections with the heat-shrink supplied, then reassemble and test.
Frequently Asked Questions
One burner won't heat. Is this the part I need?
Try the element in another burner socket first. If it heats there, the receptacle or its wiring is the likely cause, and this kit is the repair. If it doesn't heat in the other socket, the element is the problem.
The kit comes with two brackets. Which one do I use?
Use only the bracket that matches your receptacle, as shown in the parts diagram or on your old receptacle.
Is this a plug-in part for any electric range?
No. It is listed for Whirlpool, Amana, Roper, and Kenmore ranges and cooktops, and receptacle styles differ between models. We have not confirmed fit for GE, Hotpoint, or other brands. Compare it to your old receptacle, or contact our support team with your model number.
Will this fit my range?
It is listed for many Whirlpool-built ranges and cooktops, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WR60X10220 Refrigerator Condenser Fan Motor
The XPARTCO WR60X10220 is an aftermarket replacement condenser fan motor for GE frost-free refrigerators with a condenser coil. This motor lives in the compressor/machine compartment at the back or bottom of the refrigerator. Whenever the compressor runs, this fan runs right along with it, circulating air through the refrigerator's grille to cool both the compressor and the condenser coils as they work. It also plays a secondary role in helping evaporate excess water that collects in the drain pan.
Because the condenser fan cools the mechanical side of the refrigeration system rather than circulating cold air to your food, a failing motor tends to affect the whole refrigerator's cooling capacity rather than just one compartment. The harness and plug extend approximately 8" from the motor body. Common failure causes include worn motor bearings, dust and debris buildup around the coils restricting airflow, and general electrical wear over time. Symptoms include a refrigerator that runs warm overall, a hot cabinet area near the back or bottom of the unit, a squealing or grinding noise, or the compressor running constantly as it struggles to shed heat. It directly replaces AP4298602, 1257132, AH1766247, EA1766247, PS1766247, WR60X10133, WR60X10171, WR60X10192, and SM10220.
Quick Answer
The XPARTCO WR60X10220 Refrigerator Condenser Fan Motor fixes GE, Hotpoint, RCA, Kenmore, Haier, Monogram, and Café frost-free refrigerators with a hot cabinet area, squealing or grinding noise, or a fridge running warm overall. Harness and plug extend approximately 8" from the motor. Replaces AP4298602, 1257132, AH1766247, EA1766247, PS1766247, WR60X10133, WR60X10171, WR60X10192, SM10220. This cools the compressor and condenser coils — a different part and symptom pattern than an evaporator fan, which only affects internal air circulation to the food compartments.
Common Problems This Part Fixes
Refrigerator running warm overall, in both the fresh food and freezer compartments
Hot cabinet area noticeable near the back or bottom of the refrigerator
Squealing, grinding, or buzzing noise coming from the compressor compartment
Refrigerator running constantly as the compressor struggles to shed heat
Water pooling or not evaporating properly in the drain pan
Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand
Excessive dust or debris buildup visible around the condenser coils and fan
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator condenser fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This condenser fan motor is compatible with select GE, Hotpoint, and RCA frost-free refrigerators, and also fits select Kenmore, Haier, Monogram, and Café refrigerators built on the GE platform.
Note — condenser fan, not evaporator fan: This motor cools the compressor and condenser coils in the machine compartment at the back or bottom of the refrigerator. It is a completely different part from an evaporator fan motor (such as our WR60X10185 or WR60X10318 listings), which sits behind the freezer's rear panel and circulates cold air to the food compartments. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs.
Key Features
Aftermarket replacement condenser fan motor — draws air across the condenser coils and compressor to remove system heat
Resolves "hot cabinet area," "squealing or grinding noise," "runs warm overall," and "runs constantly" symptoms caused by fan failure
Also helps evaporate excess water collecting in the drain pan
Harness and plug extend approximately 8" from the motor body
Sturdy construction built for long-term reliable performance
Direct drop-in replacement matching the original mounting and blade fitment
Replaces WR60X10133, WR60X10171, WR60X10192, AP4298602, 1257132, AH1766247, EA1766247, PS1766247, and SM10220
Aftermarket replacement built to OEM-equivalent quality standards
DIY-friendly repair — typically under 30 minutes
Product Specifications
Part Number
WR60X10220
OEM Part Number
WR60X10220
Part Type
Refrigerator Condenser Fan Motor
Condition
Aftermarket Replacement
Brand
GE
Location
Compressor/machine compartment (back or bottom of cabinet)
Function
Cools the condenser coils and compressor; aids drain pan evaporation
Dimensions
2-1/2"H x 4"W x 11"D
Harness/Plug Length
Approx. 8" from motor
Repair Difficulty
Easy — under 30 minutes
Quantity
1 fan motor
Compatible Brands
GE, Hotpoint, RCA, Kenmore, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Refrigerator Before Starting Shut off power at the circuit breaker or fuse box, then pull the refrigerator away from the wall and disconnect the power cord from the outlet. Wear work gloves. Remove the condenser fan motor cover, typically held on by two screws, to access the motor. Before condemning the motor, clear away any dust, lint, or debris built up around the condenser coils and fan blade — restricted airflow from a dirty coil produces symptoms similar to a failing motor and costs nothing to rule out. Photograph the wiring and the fan blade's position before disconnecting anything. Disconnect the power wire and the ground wire from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. If the old fan blade is seized onto the motor shaft, a firm, sudden strike (rather than steady pressure) will typically break the blade loose from the shaft without damaging the plastic blade, so it can be reused on the new motor. Mount the new WR60X10220 in the same position, reconnect the power and ground wires, and confirm the blade spins freely by hand without contacting the housing before reinstalling the fan cover. Restore power and monitor the refrigerator over the next 24 hours to confirm normal, even cooling has returned and any hot cabinet area or noise has resolved. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My refrigerator has a hot spot on the cabinet and runs warm overall. Is this the right part?
Yes, this is a classic symptom pair for a failing condenser fan motor. Without proper airflow across the condenser coils and compressor, heat builds up in the machine compartment (producing that hot cabinet area) while the whole refrigeration cycle loses efficiency, which shows up as both compartments running warmer than normal rather than just one.
The old fan blade is stuck on the motor shaft. How do I remove it without breaking it?
A gentle, steady pull often won't budge a seized blade, but a firm, sudden strike to the blade (rather than continuous pressure) will typically pop it loose from the metal shaft without damaging the plastic blade itself, so you can reuse it on the new motor if a blade isn't included. Work carefully and support the blade so it doesn't fall and crack once it releases.
Could dirty condenser coils cause the same symptoms as a bad fan motor?
Yes, and it's worth checking before you buy a new motor. A condenser fan pushing air through coils caked in dust, pet hair, or debris will struggle to cool the system properly even if the motor itself is working fine. Clean the coils and the fan blade thoroughly first; if the fan still doesn't spin freely, spins with a wobble, or doesn't run at all afterward, the motor itself has failed and this replacement is the correct fix.
Does this fan also affect my drain pan?
Yes, indirectly. In addition to cooling the compressor and condenser coils, this fan helps evaporate excess water that collects in the drain pan beneath the refrigerator. If the fan has failed, you may notice water pooling or not evaporating as it normally would, in addition to the more obvious cooling and noise symptoms.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the mounting configuration, dimensions, and airflow performance of the original WR60X10220 condenser fan motor used in compatible GE, Hotpoint, RCA, Kenmore, Haier, Monogram, and Café refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
