2 Pack - XPARTCO 303373K Dryer Drum Roller Replaces 12001541, WP6-3129480
The XPARTCO 303373K is an aftermarket replacement drum roller support wheel kit for Maytag dryers, and also fits select Whirlpool, Jenn-Air, Crosley, Kenmore, Amana, and Admiral models. This roller supports the rear of the dryer drum and allows it to spin smoothly against the rear bulkhead throughout the drying cycle, working together with the front drum supports to keep everything rotating evenly.
This kit includes 2 roller, 2 shaft (axle), 2 fiber washer, 2 nut, and 2 C-clip/retainer clip. The roller measures approximately 3" in diameter and 1-1/8" wide, fits a 1/2" shaft, and does not require lubrication. Finished in white or black, made of rubber, plastic, and metal. Over time, the roller's bearing wears out or the wheel develops flat spots from age and use. Symptoms of worn rollers include the dryer being noisy, failing to tumble, leaving marks on clothes, or failing to start. It directly replaces 12001541, WP6-3129480, 12001541VP, 3-3373, 303373, 400518, AH1570070, DE693, DE693K, EA1570070, K35-248, PS1570070, EAP1570070, W10116741, Y303373, AP4008534, and 312948.
Quick Answer
The XPARTCO 303373K Dryer Drum Roller fixes Maytag, Whirlpool, Jenn-Air, Crosley, Kenmore, Amana, and Admiral dryers that are noisy, won't tumble, leave marks on clothes, or won't start. Single roller and shaft, 3" diameter, 1-1/8" wide, fits 1/2" shaft, no lubrication needed. Replaces 12001541, WP6-3129480, 12001541VP, 3-3373, 303373, 400518, AH1570070, DE693, DE693K, EA1570070, K35-248, PS1570070, EAP1570070, W10116741, Y303373, AP4008534, 312948. For even wear, it's recommended to replace both rear drum rollers at the same time — you'll need two of this kit if your dryer uses two rear rollers.
Common Problems This Kit Fixes
Dryer noisy during operation
Drum won't tumble
Marks left on clothes
Dryer won't start
Squeaking noise during the drying cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer drum roller kit directly replaces the following OEM and cross-reference part numbers:
12001541, 12001541VP, 3-3373, 303373, 400518, W10116741, DE693, W10116741, Y303373, AH1570070, EA1570070, K35-248, AP4008534, AWP38865, EAP1570070, PD00004911, PS1570070, WP6-3129480, 6-3129480, 1480353, 3-12948, 312948, W10912638, WP6-3129480VP, Y312948, AP6009858, AWP48110, EAP2347258, PD00002609, PS11743031
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum roller kit is compatible with select Maytag dryers, and also fits select Whirlpool, Jenn-Air, Crosley, Kenmore, Amana, and Admiral dryers built on the Maytag platform, including model numbers such as:
MDE5500AYW, MDE2600AYW, MDE4000AYW, MDE6800AYW, MDE7400AYW, MDE7500AYW, MDE8600AYW, MDE9606AYW
LDE4916ACE, LDE4916ACM, LDE4916ADE, LDE5916ACE, LDE5916ACM, LDE5916ADE
LDE7600ACL, LDE8426GGE, LDE8624ACE, LDE9206ACE, LDE9206ACM, LDE9206ADE, LDE9334ACE, LDE9806GGE, LDE512
LDG4916AAE, LDG4916AAM, LDG5916AAE, LDG5916AAM
LSE7806ACE, MDG9520BWW, DE303, DG7500
Note: Always verify your full model number before ordering, since Maytag uses several different drum roller designs across its dryer lineup. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement drum roller support wheel kit — single roller and shaft
Resolves "noisy," "won't tumble," "marks on clothes," and "won't start" symptoms caused by worn rollers
Kit includes 2 roller, 2 shaft, 2 fiber washer, 2 nut, and 2 C-clip
3" diameter, 1-1/8" wide, fits a 1/2" shaft
Self-lubricating bearing — no lubrication required
White or black finish, rubber/plastic/metal construction
Direct drop-in replacement matching the original mounting
Replaces 12001541, WP6-3129480, 12001541VP, 3-3373, 303373, 400518, AH1570070, DE693, DE693K, EA1570070, K35-248, PS1570070, EAP1570070, W10116741, Y303373, AP4008534, and 312948
Compatible with Maytag, Whirlpool, Jenn-Air, Crosley, Kenmore, Amana, and Admiral dryers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
303373K
OEM Part Number
12001541
Part Type
Dryer Drum Roller Support Wheel Kit
Condition
Aftermarket Replacement
Kit Contents
1x Roller, 1x Shaft, 1x Fiber Washer, 1x Nut, 1x C-Clip
Roller Diameter
3"
Roller Width
1-1/8"
Shaft Fit
1/2"
Lubrication
Not required — self-lubricating bearing
Color
White / Black
Material
Rubber / Plastic / Metal
Repair Difficulty
Easy to Moderate
Quantity
2 drum roller (single kit)
Compatible Brands
Maytag, Whirlpool, Jenn-Air, Crosley, Kenmore, Amana, Admiral
Installation Notes
⚠️ Unplug Dryer Before Starting — Install The Snap Ring Before Assembling The Roller Onto The Shaft Disconnect power at the outlet before beginning. Wear work gloves. Remove the back panel of the dryer, then remove the drum to access the rear drum roller(s). Remove the old roller by taking off the retainer clip, sliding the roller off its shaft, and removing the shaft itself if it's also being replaced. One customer found it much easier to install the C-clip/snap ring onto the new shaft before assembling the rest of the roller, rather than after. Once assembled this way, you're only dealing with tightening a nut at the back, which can be finger-tightened and then given about a half turn with a 1/2" wrench — useful since one side of the mounting area can be tight to access. Install the new roller, shaft, fiber washer, and nut in the same position, following this assembly order. If your dryer uses two rear rollers and you've ordered a second kit to replace both, repeat this process for the other side. Reinstall the drum, making sure it seats correctly on the new roller(s). While the dryer is fully open, this is also a good opportunity to clean out any accumulated lint from inside the cabinet, since lint buildup here is a genuine fire hazard that isn't addressed by simply cleaning the lint trap. Reassemble the back panel. Restore power and run a test cycle to confirm quiet, smooth tumbling with no marks transferring to clothes. Tools needed: nut driver, 1/2" wrench, work gloves.
Frequently Asked Questions
My dryer squeaks. Is this the part I need?
Yes, squeaking is one of the most common symptoms of worn drum rollers. As the roller's bearing wears down, it can no longer support the drum's rotation smoothly, producing a squeaking or squealing noise that typically gets more noticeable over time.
Should I replace both rollers, or just the one that's obviously worn?
It's recommended to replace both rear drum support rollers at the same time for even wear, even if only one appears visibly worse than the other. This kit includes a single roller and shaft, so if your dryer uses two rear rollers, you'll want to order two of this kit to replace both together.
Do I need to lubricate these rollers?
No, these rollers use a self-lubricating bearing and do not require any additional lubrication during installation or afterward.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Maytag OEM part, but is manufactured to match the diameter, width, and shaft fit of the original 12001541 drum roller kit used in compatible Maytag, Whirlpool, Jenn-Air, Crosley, Kenmore, Amana, and Admiral dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DC97-16782A Dryer Drum Roller - Compatible with Samsung Dryers
Product Description
Ensure smooth and quiet dryer operation with the Replacement DC97-16782A Dryer Drum Roller. This high-quality replacement drum support roller, designed for select Samsung and Kenmore dryers, supports the dryer drum for stable rotation during drying cycles. Made of durable plastic, rubber, and metal with a self-lubricating bushing and upgraded ball bearing, it reduces noise and wear. It fixes issues like loud squeaking or rumbling noises, drum not tumbling smoothly, or marks on clothes due to misalignment. Note: Includes one roller, shaft, and two tri-rings; each dryer uses four rollers, so replace in sets (front or rear pairs). Inspect the drum, belt (e.g., 6602-001655), and idler pulley (e.g., DC93-00634A) for wear. Clean lint from the drum and cabinet to prevent overheating.
Replaces part numbers: DC97-16782A, DC97-16782C, DC97-16782D, 2027851, DC97-07523A, DC97-07523B, PS4221885, WPW10177428, AP6016361, W10177428, 35001136, DC97-07523A, AP5325135, PS11749648, PD00002021.
Compatibility:
Compatible with models including but not limited to:
Samsung: DV42H5000EW/A3, DV42H5200EP/A3, DV45H7000EW/A2, DV48H7400EW/A2, DV40J3000EW/A2, DV50K8600EV/A3, DV52J8700EP/A2, DVE60M9900V/A3, DV419AEW/XAA, DV448AGE/XAA, DV316LEW/XAA
Kenmore: 402.89032010, 402.99032010, 402.89032011, 402.89032012
Verify your model number or contact Parts-O-Matic support for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung dryer models.
🔥 Specifications: Drum roller assembly, ~3-1/4" diameter x 1-1/8" width, blue/black plastic and rubber wheel, metal shaft, self-lubricating bushing with ball bearing, includes one roller, one shaft, and two tri-rings, dimensions ~3"L x 2-1/2"W x 3"H.
💰 Cost-Effective Alternative: Replacement roller offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires a putty knife, Phillips screwdriver, flat-blade screwdriver, work gloves, and optional second person; typically installed in 30–60 minutes.
🛡️ Reliable Fixes: Resolves loud rumbling or squeaking noises, drum not tumbling, or marks on clothes.
Safety First: Unplug the dryer from the power source and, for gas dryers, shut off the gas valve before installation.
XPARTCO DC97-16782A Dryer Drum Roller
The XPARTCO DC97-16782A is an aftermarket replacement drum support roller compatible with select Samsung and Kenmore dryers. The drum roller is a rear support wheel that cradles the dryer drum and allows it to rotate smoothly during every drying cycle. Over time, the rollers wear down, causing the drum to wobble, squeak, or thump during operation — replacing them restores quiet, stable drum rotation.
This roller features a self-lubricating bushing and includes the roller shaft and mounting tri-ring clips for a complete, ready-to-install assembly. It measures approximately 3-1/4 inches in diameter and directly replaces OEM part numbers DC97-16782A, DC97-07523A, and DC97-07523B. Sold individually — most Samsung dryers use two rear drum rollers, so we recommend replacing both at the same time. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO DC97-16782A Dryer Drum Roller fixes squeaking, thumping, or rumbling noises coming from Samsung and Kenmore dryers during operation. The drum roller supports the rear of the dryer drum — when worn, it causes noise and uneven drum rotation. Includes roller shaft and mounting clips. Approximately 3-1/4" diameter. Compatible with select Samsung and Kenmore dryers.
Common Problems This Part Fixes
Loud squeaking, thumping, or rumbling noise during dryer operation
Drum wobbling or vibrating excessively during the drying cycle
Grinding or scraping sound as the drum rotates
Dryer making noise that gets worse over time
Visible flat spots, cracks, or worn surfaces on existing drum rollers
Drum not rotating smoothly or spinning unevenly
Replaces Part Numbers
This drum roller directly replaces the following OEM and cross-reference part numbers:
DC97-16782A, DC97-16782C, DC97-16782D, 2027851, DC97-07523A, DC97-07523B, PD00002021, EAP4221885, AP5325135, PS4221885, WPW10177428, AP6016361, W10177428, 35001136, DC97-07523A, ASM930889, PD00003650, EAP11749648, AP6016361, PS11749648.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum roller is compatible with select dryers from the following brands:
Samsung dryers (gas and electric — DV2, DV3, DV4, DV5, DVE, DVG series)
Kenmore / Sears dryers (select models built on Samsung platform)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Supports the rear of the dryer drum for smooth, stable, quiet rotation during every cycle
Approximately 3-1/4" diameter — direct replacement for OEM DC97-16782A, DC97-07523A, and DC97-07523B
Self-lubricating bushing — no additional grease or oil required after installation
Complete assembly includes roller shaft and mounting tri-ring clips — everything needed for installation
Durable rubber and metal construction — resists wear, cracking, and heat damage
Aftermarket replacement built to OEM-equivalent quality standards
Often replaced together with the drum belt (6602-001655) and idler pulley (DC93-00634A) for a complete drum drive repair
DIY-friendly repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
DC97-16782A
Part Type
Dryer Drum Support Roller
Condition
Aftermarket Replacement
Application
Gas and Electric Dryers
Diameter
Approximately 3-1/4 inches
Dimensions
3" L x 2-1/2" W x 3" H
Material
Rubber / Plastic / Metal
Lubrication
Self-lubricating bushing (no grease needed)
Includes
Roller, shaft, and mounting tri-ring clips
Sold As
Single roller (most dryers require 2 — replace both)
Compatible Brands
Samsung, Kenmore
Often Replaced With
6602-001655 Drum Belt, DC93-00634A Idler Pulley
Installation Notes
⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. To access the drum rollers, remove the top panel and front panel of the dryer, then release the drum belt tension at the idler pulley and lift the drum out of the cabinet. The two rear drum rollers are located on the rear bulkhead. Remove the mounting clip, slide the old roller off the shaft, and install the new DC97-16782A roller — the shaft thread is clockwise. Reinstall the mounting clip to secure the roller. Replace both rear rollers at the same time even if only one appears worn. Reassemble the dryer, restore power, and run a test cycle. Tip: While the drum is out, inspect and replace the drum belt (6602-001655) and idler pulley (DC93-00634A) if worn. Tools needed: Phillips screwdriver, putty knife or flat pry tool.
Frequently Asked Questions
How many drum rollers does my Samsung dryer need?
Most Samsung dryers have two rear drum support rollers. This listing is for a single roller. We strongly recommend replacing both rollers at the same time — even if only one appears damaged — since they wear at the same rate and replacing both prevents the need to disassemble the dryer again soon after.
What does the drum roller do?
The drum rollers are support wheels mounted on the rear bulkhead of the dryer. They cradle the back edge of the dryer drum and allow it to spin smoothly during operation. When the rollers wear down or develop flat spots, the drum wobbles and creates loud squeaking, thumping, or grinding noises.
Does DC97-16782A replace DC97-07523A and DC97-07523B?
Yes. The DC97-16782A is the updated part number that directly supersedes both DC97-07523A and DC97-07523B. If your dryer originally used either of those older part numbers, the DC97-16782A is the correct current replacement.
Should I also replace the drum belt and idler pulley at the same time?
Yes — since the dryer is already fully disassembled to replace the rollers, it is highly recommended to also inspect and replace the drum belt (6602-001655) and idler pulley (DC93-00634A) at the same time. These three parts wear together and are commonly sold as a dryer repair kit, saving you from having to take the dryer apart again in the near future.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is made from durable rubber, plastic, and metal to match the dimensions and performance of the original DC97-16782A roller.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 4581EL2002C Dryer Drum Roller Assembly
The XPARTCO 4581EL2002C is an aftermarket replacement dryer drum support roller assembly compatible with select LG and Kenmore electric and gas dryers. The drum support rollers are cylindrical rubber-and-metal wheels mounted on fixed shafts inside the dryer cabinet that cradle and support the outer rim of the drum as it rotates. LG dryers use four support rollers — two at the front and two at the rear of the drum. When the roller wheels wear down, crack, or the axle bushings degrade, the drum no longer rides smoothly and begins to wobble, causing loud thumping, rumbling, or squealing noises, or preventing the drum from turning at all.
This roller assembly includes one roller with center bushing design, one shaft (with threaded end on one side and hex end on the other), and two tri-ring retaining clips. Sold individually — LG dryers use four rollers total, and all four should be replaced at the same time. Dimensions: 3"L x 2-3/8"W x 3"H. The 4581EL2002C is the current revision covering the earlier A, B, D, and E variants. It directly replaces 4581EL2002A, 4581EL2002B, 4581EL2002D, 4581EL2002E, 4581EL3001A, 4581EL3001C, 4581EL3001E, 4581EL3001F, DE2002A, 2701044, AP5688895, EAP8260240, and PS8260240. Often replaced together with the drum belt (4400EL2001A) and idler pulley (4561EL3002A). Installs in 30–60 minutes with basic hand tools.
Quick Answer
The XPARTCO 4581EL2002C Dryer Drum Roller fixes LG and Kenmore dryers that are thumping, rumbling, squealing, or where the drum has stopped turning. Sold individually — order 4 to replace all rollers at the same time. Includes roller, shaft, and 2 tri-ring clips. 3"L x 2-3/8"W x 3"H. Replaces 4581EL2002A, 4581EL2002B, 4581EL2002D, 4581EL2002E, 4581EL3001A, 4581EL3001C, 4581EL3001F, DE2002A, 2701044, AP5688895, PS8260240. Often replaced with drum belt (4400EL2001A) and idler pulley (4561EL3002A).
Common Problems This Part Fixes
Loud thumping or rumbling noise during the drying cycle — worn drum roller wheels
Squealing or squeaking noise — roller bushing or axle degrading
Drum turning unevenly or wobbling — rollers no longer supporting the drum evenly
Drum not spinning at all — rollers so worn the drum has dropped off the support path
Scraping or grinding noise — roller wheel surface worn flat and dragging against the drum rim
Excessive vibration during the drying cycle
Marks or scuff lines on clothes — drum dragging against the cabinet from unsupported movement
Replaces Part Numbers
This drum roller directly replaces the following OEM and cross-reference part numbers:
581EL2002L, AGM75510755, 4581EL2002H, 4581EL2002C, 4581EL2002A, 4581EL2002D, 4581EL2002E, 4581EL3001A, 4581EL3001C, 4581EL3001F, AP7220429, PS17269866
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum roller is compatible with select LG and Kenmore gas and electric dryers:
LG electric dryers — DLE series (DLE0332W, DLE0442W, DLE1310W, DLE2512W, DLE2514W, DLE2515S, DLE2516W, DLE2532W, DLE3733W, DLE4801W, DLE5001W, DLE5955W, DLE7177WM and related models)
LG electric dryers — DLEX series (DLEX3885W, DLEX5780VE, DLEX7177WM and related models)
LG gas dryers — DLG series (DLG2251W, DLG2351W, DLG3171W, DLG3744W, DLG3788W, DLG5002W and related models)
LG gas dryers — DLGX series (DLGX3886W and related models)
Kenmore / Sears dryers — 796-series (LG-built electric and gas models)
Important: This roller is sold individually. LG dryers use four drum support rollers — replace all four at the same time for even drum support and longest service life. Order 4 of this part per repair.
Key Features
Supports and cradles the drum rim as it rotates for smooth, quiet operation
Center bushing design — rubber wheel over plastic hub with metal shaft for durability and smooth rotation
Sold individually — order 4 per repair (LG dryers use 4 rollers: 2 front, 2 rear)
Kit includes: 1 roller assembly, 1 dual-end shaft (threaded and hex), 2 tri-ring retaining clips
Dimensions: 3"L x 2-3/8"W x 3"H per roller
4581EL2002C is the current revision — covers 4581EL2002A, B, D, and E variants
Replaces 4581EL2002A, 4581EL2002B, 4581EL3001A, 4581EL3001C, DE2002A, 2701044, AP5688895, and PS8260240
Often replaced together with drum belt (4400EL2001A) and idler pulley (4561EL3002A)
Compatible with LG DLE, DLEX, DLG, DLGX series and Kenmore 796-series dryers
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
4581EL2002C
Also Replaces
4581EL2002A, 4581EL2002B (prior revisions)
Part Type
Dryer Drum Support Roller Assembly
Condition
Aftermarket Replacement
Application
LG and Kenmore Gas and Electric Dryers
Quantity
Sold individually — order 4 per repair
Dimensions
3"L x 2-3/8"W x 3"H (per roller)
Design
Center bushing — rubber wheel / plastic hub / metal shaft
Material
Rubber / Plastic / Metal
Color
Black / Red
Includes
1 roller assembly, 1 dual-end shaft, 2 tri-ring retaining clips
Often Replaced With
4400EL2001A Drum Belt, 4561EL3002A Idler Pulley
Compatible Brands
LG, Kenmore (LG-built)
Installation Notes
⚠️ Unplug Dryer Before Starting — Wear Work Gloves Disconnect power (and shut off gas for gas dryers) before beginning. Wear work gloves — there are sharp sheet metal edges inside the LG dryer cabinet. Access the drum rollers by removing the rear panel of the dryer (most LG models). Take a photo of the belt routing and roller positions before removing anything. Release the drive belt from the idler pulley, lift the drum, and set it aside. Each drum roller is mounted on a fixed shaft in the dryer cabinet — the roller is held by two tri-ring retaining clips. Use needle-nose pliers to remove the old clips, slide the old roller off the shaft, and slide the new roller on. Install the new tri-ring clips to secure the roller. Repeat for all four rollers. Reinstall the drum, re-route the belt, and reassemble the rear panel. Restore power and run a test cycle to confirm quiet, smooth drum operation. Tip: while the dryer is open, also replace the drum belt (4400EL2001A) and idler pulley (4561EL3002A) if worn. Tools needed: Phillips screwdriver, Torx screwdriver (T20 on some models), needle-nose pliers, work gloves.
Frequently Asked Questions
How many drum rollers does my LG dryer have, and how many should I order?
LG dryers use four drum support rollers — two mounted at the front of the drum cavity and two at the rear. This listing is for a single roller. To replace all four at once (which is always recommended), order four of this part. Replacing all four at the same time ensures even drum support and eliminates the risk of a second disassembly in the near future when the remaining old rollers wear out.
What is the difference between 4581EL2002C and 4581EL2002A or 4581EL2002B?
These are successive production revisions of the same LG drum roller assembly. 4581EL2002A was the original, 4581EL2002B and C were updates, and D and E are further revisions. All variants are the same roller in terms of dimensions and function — if your dryer's parts diagram shows any of these part numbers, the 4581EL2002C is the correct current replacement. The 4581EL3001A, 4581EL3001C, and 4581EL3001E numbers are also alternate cross-references for this same roller family.
Should I replace the drum belt and idler pulley at the same time?
Yes — since the dryer must be fully disassembled to replace the drum rollers, this is the ideal time to also inspect and replace the drum belt (4400EL2001A) and idler pulley assembly (4561EL3002A). All three parts form the drum drive system and wear at similar rates. A worn belt or idler pulley is often what caused the rollers to wear prematurely in the first place. Replacing all three in one repair eliminates the most common LG dryer drum noise failure points and saves you from repeating the disassembly in the near future.
What causes LG dryer drum rollers to wear out?
Drum rollers wear naturally from the continuous load of supporting the rotating drum over thousands of drying cycles. Common factors that accelerate wear include operating the dryer with consistently very large or heavy loads, running cycles that are much longer than necessary (which increases total roller rotation time), lint buildup around the roller shafts causing the axle bushings to run dry, and a worn or broken drive belt that lets the drum sag and adds extra weight to the rollers. Regular dryer maintenance — including cleaning lint from around the drum and checking the belt — helps extend roller life.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured from rubber, plastic, and metal to match the dimensions and load-bearing performance of the original 4581EL2002C drum roller assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WE03X10008 Dryer Drum Roller
Replaces Part Numbers:WE03X10008, 1088999, AH959905, EA959905, AP3778075, PS959905.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
EXP694 Dryer Repair Kit Replaces DC97-16782A, 6602-001655, DC93-00634A
The EXP694 Dryer Repair Kit is a complete drum system rebuild solution designed to restore smooth, quiet, and efficient dryer operation. This kit includes the most common wear components found inside your dryer: drum belt, idler pulley, and drum support rollers.
Over time, these parts wear down together, causing squeaking, grinding, drum slippage, or complete failure to spin. Replacing all components at once ensures proper alignment, eliminates noise, and prevents repeat breakdowns — making this the most effective long-term repair solution.
Quick Answer
The EXP694 Dryer Repair Kit fixes dryers that won’t spin, make loud squeaking or grinding noises, or stop tumbling. It replaces the belt, rollers, and idler pulley to restore smooth and quiet drum operation.
Note: Includes four rollers (each with shaft and two tri-rings), one idler pulley, and one belt. Replace all four rollers for even wear. Inspect the drum and felt seal (e.g., DC97-07618A) for wear. Clean lint from the drum and cabinet to prevent overheating.
Common Problems This Part Fixes
Dryer drum not spinning or slipping
Loud squeaking, grinding, or thumping noises
Uneven or slow drum rotation
Dryer stopping mid-cycle
Excessive vibration or instability
Worn belt, rollers, or idler pulley components
Replaces Part Numbers
This repair kit replaces the following common drum system components:
Drum Roller: DC97-16782A, AP5325135, DC97-16782C, DC97-16782D, 2027851, DC97-07523A, DC97-07523B, PS4221885, WPW10177428, AP6016361, W10177428, 35001136, DC97-07523A, PS11749648
Idler Pulley: DC93-00634A, AP6038887, DC96-00882C, DC61-01230B, DC96-00882B, PS11771601, 12002777, AP4010261, 1401171, 35001083, 35001098, 35001276, AH2004052, DC61-01215A, DC96-00882B, EA2004052, PS2004052
Drum Belt: 6602-001655, AP4373659, 1935594, 6602-001314, PS4133825, WPW10205415, AP6017004, W10205415, 35001137, 6602-001314, PS11750299
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This repair kit is compatible with select dryers from the following brands:
Samsung dryers (gas and electric models)
Kenmore / Sears dryers (select models built on Samsung platform)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Complete drum repair kit including belt, rollers, and idler pulley
OEM-equivalent fit, performance, and durability
Eliminates noise and restores smooth drum rotation
Prevents repeat repairs by replacing all wear components together
Cost-effective all-in-one repair solution
DIY-friendly installation with basic tools
Product Specifications
Includes 4 drum rollers (DC97-16782A, ~3-1/4" diameter x 1-1/8" width, blue/black plastic/rubber, metal shaft, self-lubricating bushing with ball bearing, each with shaft and two tri-rings), 1 idler pulley (DC93-00634A, metal/plastic), 1 drum belt (6602-001655, 92" long, 5 ribs, neoprene), kit dimensions ~10"L x 6"W x 4"H.
Part Type
Dryer Repair Kit
Includes
Belt, Rollers, Idler Pulley
Application
Dryer Drum System
Condition
Aftermarket Replacement
Compatible Brands
Samsung, Kenmore
Installation Notes
⚠️ Safety First — Unplug Dryer Before Starting Disconnect power before servicing. Remove dryer panels, release belt tension, and replace worn components. Ensure proper alignment of the belt and rollers before reassembly. For best results, replace all components included in this kit at the same time.
Frequently Asked Questions
Should I replace all parts at once?
Yes. The belt, rollers, and pulley wear together. Replacing all components ensures smooth operation and prevents future breakdowns.
Will this fix dryer noise?
Yes. This kit resolves most squeaking, grinding, and thumping noises caused by worn drum components.
Is this an OEM part?
This is a high-quality aftermarket repair kit built to OEM-equivalent standards for performance and durability.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Parts ✓ Compatibility Support ✓ Secure Checkout
EXP696 Dryer Drum Roller & Belt for Samsung Replaces DC97-16782A, 6602-001655
This Kit Included Following Parts:4 X Drum Rollers DC97-16782A 1 X Drum Belt 6602-001655
Drum Roller Replaces Part Numbers: DC97-16782A, AP5325135, DC97-16782C, DC97-16782D, 2027851, DC97-07523A, DC97-07523B, PS4221885, WPW10177428, AP6016361, W10177428, 35001136, DC97-07523A, PS11749648
Drum Belt Replaces: 6602-001655, AP4373659, 1935594, 6602-001314, PS4133825, WPW10205415, AP6017004, W10205415, 35001137, 6602-001314, PS11750299
This is an aftermarket part that can be used as a replacement for the OEM part.
EXP445 Dryer Repair Kit – Compatible with LG and Kenmore Dryers
Product Description
Eliminate dryer noise and restore smooth drum rotation with the EXP445 Dryer Repair Kit, designed for select LG and Kenmore dryers. This high-quality aftermarket replacement kit includes all the essential components — drum rollers, idler pulley, and drive belt — to replace worn or noisy parts. A failing roller or belt can cause squealing, thumping, or the drum not turning properly. Installing this all-in-one kit brings quiet, efficient operation back to your dryer at an affordable price.
Replaces Part Numbers
Drum Rollers Replaces 4581EL2002L, AGM75510755, 4581EL2002H, 4581EL2002C, 4581EL2002A, 4581EL2002D, 4581EL2002E, 4581EL3001A, 4581EL3001C, 4581EL3001F, AP7220429, PS17269866.
Drum Belt Replaces: 4400EL2001F, 4400EL2001A, 4115028, 4400EL2001C, 4400EL2001E, AP5972814, PS11705916.
Idler Pulley Assembly Replaces: 4561EL3002A, 4561EL3002B, AH3523033, EA3523033, AP4438243, PS3523033.
Compatibility
This replacement repair kit fits select LG and Kenmore dryers.
Example compatible models include (but are not limited to): LG DLE7177WM, LG DLE5955W, LG DLEX3470V, and Kenmore 796.81022900.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement Kit – Designed specifically for LG dryers
🔇 Restores Quiet Operation – Replaces worn rollers, belt, and pulley to reduce noise
💰 Complete Solution – All major moving parts included in one repair bundle
🛠️ DIY Friendly – Easy installation using standard hand tools
🛡️ Fixes Common Issues – Solves loud squealing, drum not spinning, or uneven drying
📐 Product Specification
Part Number: EXP445
Component Type: Dryer Maintenance Kit
Included Components:
(4) Drum Support Rollers
(1) Idler Pulley
(1) Drive Belt
Material: Reinforced rubber belt, metal rollers, and high-strength bearings
Mounting: Direct-fit replacement for LG dryer assemblies
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver, needle-nose pliers
⚠️ Safety First: Always unplug the dryer before beginning repairs to prevent electrical shock.
Steps:
Unplug dryer and remove top and front panels.
Release belt tension and lift drum out of cabinet.
Replace rollers, pulley, and belt with new kit components.
Reassemble dryer and reconnect power.
Test dryer for smooth, quiet rotation.
⏱️ Time Required: 30–45 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Get your LG dryer running like new — Add to Cart Now for a complete, cost-effective repair kit!
ERP 3129480 Dryer Drum Support Roller Shaft
Fits Specific Maytag, Amana, Admiral Dryer Models.
Replaces Part Number: WP6-3129480, 6-3129480, 1480353, 3-12948, 312948, W10912638, WP6-3129480VP, Y312948, AP6009858, PS11743031.
Description: The Dryer Drum Roller Axle is a replacement part for specific Maytag, Admiral, Whirlpool dryer models. It plays a role in the dryer's operation by offering support and an axis for the drum roller to spin smoothly. This guarantees effective and balanced tumbling of clothes throughout the drying cycle.
This is an aftermarket part that can be used as a replacement for the OEM part.
EXP641 Dryer Belt and Idler Pulley Set – Replaces WP40111201 & WPY54414 – Compatible with Maytag, Whirlpool & Kenmore Dryers
Product Description
Restore smooth drum rotation and eliminate dryer noise with the EXP641 Dryer Belt and Idler Pulley Set. This high-quality aftermarket repair kit includes a dryer drum belt and idler pulley wheel, providing a complete solution for common belt tension and tumbling issues.
If your dryer is squealing, not turning, or producing uneven drying results, worn belt and pulley components are often the cause. Replacing both parts together helps restore proper belt tension, reduce noise, and extend the life of your dryer.
This kit is engineered to match original fit and function while offering a cost-effective alternative to OEM parts.
Belt Replaces Part Numbers
WP40111201, 40111201, 14218936, 40051501, 40051502, 59174, AP6009126, AWP47792, EAP11742271, PD00002505, PS11742271, R0606549, WP40111201VP, 661570V, 661570, 3387610, 3389728, 3393999, 339728, 661570VP, AP5983729, PS11722115
Idler Pulley Replaces Part Numbers
WPY54414, Y54414, 1246423, 14218926, 54414, R0609504, 54414-2, PD00002420, EAP11757553, AP6024203, PS11757553.
Compatibility
This dryer belt and idler pulley repair kit fits select Maytag, Whirlpool, Kenmore (Whirlpool/Maytag-manufactured), Amana, Crosley, and Estate dryers.
Common compatible models include (but are not limited to):
Maytag MEDC215EW
Whirlpool WED4815EW
Kenmore 110.60612990
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
Key Features
Complete Repair Kit – Includes drum belt and idler pulley wheel
Restores Smooth Tumbling – Ensures proper drum rotation
Reduces Noise & Vibration – Fixes squealing or slipping belt issues
Durable Construction – Reinforced belt and long-life pulley bearing
Cost-Effective Solution – Replace both wear items at once
Product Specification
Kit Number: EXP641
Includes:
Dryer Drum Belt (replaces WP40111201)
Idler Pulley Wheel (replaces WPY54414)
Application: Dryer drum drive system
Material: Reinforced rubber belt, metal pulley with bearing
Quality Level: Aftermarket replacement kit (not OEM)
Installation Notes
Tools Needed: Phillips screwdriver, nut driver
Safety First: Unplug the dryer before servicing to avoid electrical shock.
Basic Steps:
Disconnect dryer power.
Remove top and front panels (model dependent).
Remove drum and old belt and pulley.
Install new idler pulley onto idler arm.
Route new belt around drum and motor pulley.
Reassemble dryer and test operation.
Time Required: 30–45 minutes
Shop With Confidence
Trusted Aftermarket Appliance Parts
30-Day Return Policy
Restore quiet, reliable dryer performance — Add to Cart Now for a complete, budget-friendly repair solution!
Choice Manufactured Parts
Choice 40111201 Dryer Drum Belt Replaces WP40111201
Aftermarket 5-rib / 4-groove dryer drum belt for select Amana, Maytag, Whirlpool-built, Admiral, Crosley, Speed Queen, Magic Chef and related dryers.
Product Overview
The Choice 40111201 Dryer Drum Belt is an aftermarket replacement for Whirlpool/Maytag part WP40111201. The belt wraps around the dryer drum, motor pulley and idler pulley so the motor can rotate the drum during the drying cycle.
A worn, stretched or broken belt can cause the dryer motor to run while the drum does not turn, or may contribute to thumping, slipping or abnormal belt noise.
Quick Answer
Choice part 40111201CM is a 5-rib, 4-groove belt approximately 93.5 inches long designed to replace WP40111201 / 40111201 on compatible Whirlpool-manufactured dryer platforms.
Common Problems This Part May Fix
Dryer runs but drum does not turn
Drum turns intermittently or slips
Broken or visibly cracked belt
Stretched belt with poor tension
Thumping or squealing related to belt wear
Replaces and Cross-References
WP40111201, 40111201, 14218936, 40051501, 40051502, 59174, AP6009126, AWP47792, EAP11742271, PD00002505, PS11742271, R0606549, WP40111201VP, 661570V, 661570, 3387610, 3389728, 3393999, 339728, 661570VP, AP5983729, PS11722115
Cross-reference numbers are provided for identification. This is a Choice Manufactured Parts aftermarket replacement and is not a Genuine Whirlpool OEM belt.
Compatibility
Designed for select dryers manufactured under Amana, Maytag, Whirlpool, Admiral, Crosley, Speed Queen, Magic Chef and related brands. Compatible model examples include:
SDE405DAYW
SDE305DAYW
LGA30AW/PLGA30AW
LE4807L/P1163706WL
NG4819L53738
LEA20AL-PLEA20AL
SLG332RAW
LG3412L/P1122505WL
LE2102L/P1118302WL
Important: This is only a partial compatibility list. Verify the full dryer model number and original belt number before ordering. Similar-looking belts can differ in length, width and rib count.
Key Features
Choice Manufactured Parts aftermarket replacement
Replaces WP40111201 / 40111201
5 ribs / 4 grooves
Approx. 93.5-inch belt length
Designed to restore proper drum rotation
Fits many Whirlpool-manufactured dryer platforms
Product Specifications
Choice Part Number
40111201CM
Listing Part Number
40111201
Brand
Choice Manufactured Parts
Part Type
Dryer Drum Drive Belt
Length
Approx. 93.5 in.
Ribs
5
Grooves
4
Material
Reinforced rubber belt
Condition
New
Part Quality
Aftermarket Replacement
Installation Notes
Disconnect electrical power before servicing the dryer.
Access the drum according to the appliance service procedure.
Route the new belt around the drum with the ribbed side against the drum where specified by the dryer design.
Route the belt around the motor pulley and idler/tension pulley exactly as the original belt was installed.
Rotate the drum by hand before reassembly to confirm the belt tracks correctly and is not twisted.
Inspect the idler pulley and drum rollers while the dryer is open; worn support parts can shorten belt life.
Frequently Asked Questions
Is this Genuine Whirlpool OEM?
No. This is a Choice Manufactured Parts aftermarket replacement for WP40111201.
How long is the belt?
Choice specifies this belt at approximately 93.5 inches long with 5 ribs and 4 grooves.
What does the dryer belt do?
It connects the motor drive system to the drum so the drum tumbles while the dryer operates.
Does it replace WP40111201?
Yes. Choice 40111201CM is sold as an aftermarket replacement for WP40111201 and 40111201 on compatible models.
Shop With Confidence
Match the complete appliance model number and original belt number before ordering. Our compatibility team can help confirm fitment.
Choice Replacement5-Rib Belt93.5 in. LengthCompatibility Support
341241 Dryer Genuine OEM Drum Belt
The 341241 is a Genuine OEM dryer drum belt compatible with a wide range of Whirlpool-family dryers including Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Hardwick, Caloric, and Ikea. The drum belt wraps around the outside of the dryer drum, loops around the motor pulley and idler pulley, and drives the drum to rotate during every drying cycle. Without a functioning belt, the drum cannot spin and clothes will not tumble or dry.
Made from high-strength rubber with reinforced ribs, this belt measures 92-1/4 inches long x 1/4 inch wide and features 4 ribs and 3 grooves. It is flat on one side and ribbed on the other, and is built to resist cracking, stretching, and wear under the high heat and repeated tension cycles of daily dryer use. It also replaces some 5-rib, 4-groove belts. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The 341241 Dryer Genuine OEM Drum Belt fixes dryers where the drum is not spinning, clothes are not tumbling, or a thumping/squealing noise is coming from the dryer. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, and more. Measures 92-1/4" L x 1/4" W with 4 ribs and 3 grooves.
Common Problems This Part Fixes
Dryer drum not spinning — motor runs but drum stays still
Clothes not tumbling during the drying cycle
Thumping, squealing, or slapping noise during operation
Dryer runs but produces no heat because drum is stationary
Burning rubber smell coming from the dryer
Visible broken or frayed belt pieces found inside the dryer cabinet
Clothes taking too long to dry due to drum not rotating at correct speed
Replaces Part Numbers
This drum belt directly replaces the following OEM and cross-reference part numbers:
341241, 14210003, 2008, 26000341241, 26000349533, 31001026, 31531589, 3389628, 3392665, 3394651, 3399844, 341241VP, 345473, 349533, 529597, 53-0186, 53-1080, 53-1086, 53-1528, 53-1589, 53-2671, 53-2910, 660996, 660997, 661561, 693306, 694088, 694416, 694868, 695055, 697388, 8066065, 8206, 8210, 920H4, 920H5, 99906951, 99989673, 99989674, FSP341241, LB276, LB279, P46-037, P46-149, W10127457, W10131364, AH346995, AP32, EA346995, ER341241, AWP39161, PD00002263, EAP346995, AP2946843, PS346995, TJ341241.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum belt is compatible with select dryers from the following brands:
Whirlpool dryers (gas and electric)
Kenmore / Sears dryers (select models)
Maytag dryers
KitchenAid dryers
Amana dryers
Roper dryers
Admiral dryers
Jenn-Air dryers
Estate dryers
Magic Chef dryers
Crosley dryers
Inglis dryers
Norge, Modern Maid, Hardwick, Caloric, and Ikea dryers
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Drives the dryer drum via the motor pulley and idler pulley for smooth, consistent tumbling every cycle
92-1/4" length x 1/4" width — 4-rib, 3-groove design; flat on one side, ribbed on the other
Also replaces some 5-rib, 4-groove belts — wide cross-compatibility across Whirlpool-family models
Made from high-strength rubber with reinforced ribs — resists cracking, stretching, and heat damage
Direct replacement for OEM part numbers 341241 and 8066065 — no modification required
Compatible with over a dozen major appliance brands built on the Whirlpool platform
Genuine OEM part — factory-exact fit, materials, and dimensions
DIY-friendly repair — installs in 30–45 minutes with basic hand tools
Often replaced together with the idler pulley (691366) and drum rollers (349241T) for a complete drum drive repair
Product Specifications
Part Number
341241
Part Type
Dryer Drum Drive Belt
Condition
Genuine OEM
Application
Gas and Electric Dryers
Length
92-1/4 inches
Width
1/4 inch
Ribs
4 ribs, 3 grooves
Profile
Flat on one side, ribbed on the other
Material
High-strength rubber with reinforced ribs
Color
Black
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Hardwick, Caloric, Ikea
Often Replaced With
691366 Idler Pulley, 349241T Drum Rollers
Installation Notes
⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. Remove the lint screen, then unscrew the two Phillips screws inside the lint filter housing. Use a putty knife 2 inches from each front corner to release the top panel clips and lift the top panel. Remove the front panel to access the drum. Release belt tension at the idler pulley, lift the drum slightly, and slide the old belt off. Loop the new 341241 belt around the drum with the ribbed side facing down (toward the drum). Route the belt around the idler pulley and motor pulley — consult your model's service manual or a model-specific video for the correct belt path. Reassemble and run a test cycle. Tip: While the drum is out, inspect and replace the idler pulley (691366) and drum rollers (349241T) if worn. Tools needed: Phillips screwdriver, putty knife or flat pry tool.
Frequently Asked Questions
How does the 341241 differ from the W10205415 and 6602-001655 belts?
All three are 92-inch dryer drum belts, but they differ in width and rib count. The 341241 is 1/4" wide with 4 ribs and 3 grooves. The W10205415 is 3/8" wide with 5 ribs and 4 grooves. The 6602-001655 is 5/16" wide with 5 ribs and 4 grooves designed for Samsung dryers. Always match the part number to your specific model — do not substitute based on appearance alone.
Will this belt fit my Kenmore dryer?
Many Kenmore dryers — especially the popular 110-series — are manufactured by Whirlpool and use the 341241 belt. Check your model number against the compatibility list and contact our support team if you need help confirming the fit before ordering.
How do I know if my drum belt needs to be replaced?
The most obvious sign is that the dryer motor hums but the drum does not spin. You may also notice a thumping or slapping sound during operation, a burning rubber smell, or clothes that are damp after a full cycle. Open the dryer cabinet to visually confirm if the belt is broken, frayed, or stretched.
Should I also replace the idler pulley and drum rollers?
Yes — since the dryer is already disassembled, it is highly recommended to inspect and replace the idler pulley (691366) and drum support rollers (349241T) at the same time. These parts wear at a similar rate and replacing all three together — often sold as a repair kit — prevents having to disassemble the dryer again in the near future.
Is this an OEM or aftermarket part?
This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same belt that came installed in your dryer from the factory — same materials, dimensions, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
