Search results for "dryer belts"

XPARTCO W10112954 Dryer Drum Belt Replaces WPW10112954 The XPARTCO W10112954 is an aftermarket replacement dryer drum belt compatible with select Whirlpool, Maytag, Amana, Kenmore, and Crosley dryers. The drum belt wraps around the outside of the dryer drum, loops around the motor pulley and idler pulley, and drives the drum to rotate during every drying cycle. Without a functioning belt, the drum cannot spin and clothes will not tumble or dry. Made from durable rubber, this 5-rib Multi-V belt measures 93-1/4 inches long x 5/16 inch wide x 1/8 inch high and is built to resist cracking, stretching, and wear under the high heat and repeated tension cycles of daily dryer use. It is a direct drop-in replacement for OEM part numbers WPW10112954 and W10112954, and also replaces W10131172 on compatible models. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO W10112954 Dryer Drum Belt fixes dryers where the drum is not spinning, clothes are not tumbling, or a thumping/squealing noise is coming from the dryer during operation. Compatible with select Whirlpool, Maytag, Amana, Kenmore, Crosley, and Admiral dryers. Measures 93.38" with 5 ribs and 4 grooves. Common Problems This Part Fixes Dryer drum not spinning — motor runs but drum stays still Clothes not tumbling during the drying cycle Thumping, squealing, or slapping noise during operation Dryer runs but produces no heat because drum is stationary Burning rubber smell coming from the dryer Visible broken or frayed belt pieces found inside the dryer cabinet Dryer shuts off shortly after starting due to drum not rotating Replaces Part Numbers This drum belt directly replaces the following OEM and cross-reference part numbers: WPW10112954, W10112954, 1447719, AWP48873, PD00003553, EAP11748388, AP6015116, PS11748388. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drum belt is compatible with select dryers from the following brands: Whirlpool dryers (gas and electric) Maytag dryers (gas and electric) Amana dryers Kenmore / Sears dryers (select Whirlpool-built models) Crosley dryers Admiral dryers Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Drives the dryer drum via the motor pulley and idler pulley for smooth, consistent tumbling every cycle 93-1/4" length x 5/16" width x 1/8" height — 5-rib Multi-V design for a secure, slip-free grip on the pulleys Made from durable rubber — resists cracking, stretching, and heat damage Direct replacement for OEM part numbers WPW10112954 and W10112954 — no modification required Also replaces W10131172 on compatible models Compatible with Whirlpool, Maytag, Amana, Kenmore, Crosley, and Admiral dryers Aftermarket replacement built to OEM-equivalent quality standards DIY-friendly repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number W10112954 OEM Part Number WPW10112954 Part Type Dryer Drum Drive Belt (5-Rib Multi-V) Condition Aftermarket Replacement Application Gas and Electric Dryers Length 93-1/4 inches Width 5/16 inch Height 1/8 inch Ribs 5 ribs, 4 grooves Material Rubber Color Black Compatible Brands Whirlpool, Maytag, Amana, Kenmore, Crosley, Admiral Installation Notes ⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. To access the drum belt, remove the top panel and front panel of the dryer. Lift the drum out of the cabinet, remove the old belt, and loop the new W10112954 belt around the drum with the ribbed side facing inward toward the drum. Route the belt around the idler pulley and motor pulley — consult your dryer's service manual or a model-specific repair video for the correct belt path around the pulleys. Reassemble the front panel, top panel, and restore power before running a test cycle. Tip: While the drum is out, inspect and replace the idler pulley and drum support rollers if worn. Tools needed: Phillips screwdriver, putty knife or flat pry tool. Frequently Asked Questions What is the difference between W10112954 and WPW10112954? These are the same belt. WPW10112954 is the updated Whirlpool OEM part number that superseded the original W10112954 number. Both refer to the identical drum belt — this aftermarket replacement is compatible with both. How does the W10112954 differ from the W10205415 belt? Both are 5-rib Whirlpool-family belts, but they differ slightly in length and width. The W10112954 is 93-1/4" long x 5/16" wide. The W10205415 is 92" long x 3/8" wide. They are not interchangeable — always use the part number specific to your dryer model. How do I know if my drum belt is broken? The most obvious sign is that the dryer motor runs and you can hear it humming, but the drum does not spin. You may also hear a thumping or slapping sound if the belt is partially broken or slipping. Open the dryer cabinet to visually inspect the belt and confirm if it is broken, frayed, or stretched out of shape. Does the W10112954 also replace W10131172? Yes — the W10112954 belt replaces W10131172 on compatible models. Both are 5-rib Whirlpool-family drum belts used across similar model ranges. Always verify your specific model number to confirm the correct belt before ordering. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is made from durable rubber to match the dimensions and performance of the original WPW10112954 belt. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

XPARTCO W10112954 Dryer Drum Belt – Replacement for Whirlpool, Maytag, Amana, and More Product Overview This Dryer drive Belt is a replacement part that is guaranteed to keep your dryer running smoothly. Compatible with a range of Whirlpool dryer models, including brands such as Whirlpool, Kenmore, and Maytag. This Drive Belt is an essential component that helps your dryer drum rotate efficiently, ensuring optimal drying performance. Made in USA – Durable, high-grade construction Replaces Part Numbers This drum belt replaces part numbers WPW10112954, W10112954, 1447719, PD00003553, EAP11748388, AP6015116, PS11748388.  It matches original specifications for length, width, and tension to ensure proper operation. Compatible Brands Compatible with many dryers from Whirlpool, Maytag, Amana, Crosley, Admiral, and Kenmore (Whirlpool-built). Fits a range of front-load and top-load electric and gas dryer models. Key Features: ✅ Made in USA – Durable, high-grade construction 🔁 Replaces: WPW10112954, AP6015092, PS11748690 🧰 Easy to install – fits Whirlpool, Kenmore, Maytag & more 📦 Built to OEM standards for a long-lasting fit ⚠️ Unplug appliance before servicing. Contact us to confirm model compatibility. 💯 30-Day Money Back Guarantee🔧 Part Number: W10112954 Fixes the Following Issues Dryer drum won’t spin Belt is visibly cracked, frayed, or broken Dryer makes thumping or squealing sounds Motor runs but clothes stay stationary Why Buy from Parts-O-Matic Cost-effective aftermarket solution Fast and free U.S. shipping Trusted by professional repair technicians and DIYers Easy returns and dependable customer service

Read more less

XPARTCO 661570 Dryer Drum Belt Replaces 661570V The XPARTCO 661570 is an aftermarket replacement dryer drum belt compatible with select Whirlpool, Maytag, Kenmore, Amana, KitchenAid, Crosley, Admiral, and Speed Queen dryers. The drum belt wraps around the outside of the dryer drum, loops around the idler pulley and motor pulley, and drives the drum to rotate during every drying cycle. Without a functioning belt, the drum cannot spin and clothes will not tumble or dry. Made from high-strength rubber, this 4-rib belt measures 93-1/2 inches long x 1/4 inch wide x 1/8 inch high with 4 ribs and 3 grooves. It is a direct drop-in replacement for OEM part numbers 661570V and 661570, and is part of the 4392067 dryer repair kit. It pairs with the W10837240 idler pulley and WPW10314173 drum rollers for a complete drum drive overhaul. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO 661570 Dryer Drum Belt fixes dryers where the drum is not spinning, clothes are not tumbling, or a thumping/squealing noise is present during operation. Compatible with select Whirlpool, Maytag, Kenmore, Amana, KitchenAid, Crosley, Admiral, and Speed Queen dryers. Measures 93-1/2" L x 1/4" W x 1/8" H with 4 ribs and 3 grooves. Common Problems This Part Fixes Dryer drum not spinning — motor runs but drum stays still Clothes not tumbling during the drying cycle Thumping, squealing, or slapping noise during operation Dryer runs but produces no heat because drum is stationary Burning rubber smell coming from the dryer Visible broken or frayed belt pieces found inside the dryer cabinet Dryer shuts off shortly after starting due to drum not rotating Replaces Part Numbers This drum belt directly replaces the following OEM and cross-reference part numbers: 661570V, 661570, 3387610, 3389728, 3393999, 339728, 4248258, 661570VP, AWP761693, OEM17951196, PD00023608, FIX382430, AP5983729, PS11722115. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drum belt is compatible with select dryers from the following brands: Whirlpool dryers (gas and electric) Maytag dryers (gas and electric) Kenmore / Sears dryers (select Whirlpool-built models) Amana dryers KitchenAid dryers Crosley dryers Admiral dryers Speed Queen dryers Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Drives the dryer drum via the idler pulley and motor pulley for smooth, consistent tumbling every cycle 93-1/2" length x 1/4" width x 1/8" height — 4-rib, 3-groove design for a secure, slip-free grip on the pulleys Made from high-strength rubber — resists cracking, stretching, heat damage, and oil Direct replacement for OEM part numbers 661570V and 661570 — no modification required Part of the 4392067 dryer repair kit — pairs with W10837240 idler pulley and WPW10314173 drum rollers Aftermarket replacement built to OEM-equivalent quality standards DIY-friendly repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number 661570 OEM Part Number 661570V Part Type Dryer Drum Drive Belt Condition Aftermarket Replacement Application Gas and Electric Dryers Length 93-1/2 inches Width 1/4 inch Height 1/8 inch Ribs 4 ribs, 3 grooves Material High-strength rubber Color Black Compatible Brands Whirlpool, Maytag, Kenmore, Amana, KitchenAid, Crosley, Admiral, Speed Queen Part of Kit 4392067 Dryer Repair Kit Often Replaced With W10837240 Idler Pulley, WPW10314173 Drum Rollers Installation Notes ⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. Remove the lint screen and unscrew the Phillips screws inside the lint screen housing. Use a putty knife to release the top panel clips and lift the top panel. Remove the front panel to access the drum. Release the belt from the idler pulley, lift the drum slightly, and slide the old belt off. Loop the new 661570 belt around the drum with the ribbed side facing inward toward the drum. Route the belt around the idler pulley and motor pulley — consult your dryer's service manual or a model-specific repair video for the correct belt path. Reassemble and run a test cycle. Tip: While the drum is out, inspect and replace the idler pulley (W10837240) and drum rollers (WPW10314173) if worn. Tools needed: Phillips screwdriver, putty knife or flat pry tool. Frequently Asked Questions What is the difference between 661570 and 661570V? These are the same belt. 661570V is the updated OEM part number (the "V" denotes the current version) that superseded the original 661570. Both numbers refer to the identical drum belt — this aftermarket replacement is compatible with both. How does the 661570 differ from the 341241 and W10205415 belts? All three are Whirlpool-family dryer drum belts, but they differ in length, width, and rib count. The 661570 is 93-1/2" long x 1/4" wide with 4 ribs and 3 grooves. The 341241 is 92-1/4" long x 1/4" wide with 4 ribs and 3 grooves. The W10205415 is 92" long x 3/8" wide with 5 ribs and 4 grooves. They are not interchangeable — always use the part number specific to your dryer model. How do I know if my drum belt is broken? The most obvious sign is that the dryer motor hums but the drum does not spin. You may also notice a thumping or slapping sound, a burning rubber smell, or damp clothes after a full drying cycle. Open the dryer cabinet to visually confirm if the belt is broken, frayed, or stretched out of shape. Should I also replace the idler pulley and drum rollers? Yes — since the dryer is already disassembled, it is highly recommended to inspect and replace the idler pulley (W10837240) and drum support rollers (WPW10314173) at the same time. All three parts wear together and are sold together in the 4392067 dryer repair kit. Replacing all three prevents having to disassemble the dryer again in the near future. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is made from high-strength rubber to match the dimensions and performance of the original 661570V belt. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

WE12X10014 Dryer Genuine OEM Drum Belt  Dryer drive belt. This is the most common GE/Hotpoint dryer belt. 4 Rib, 87.8" Replaces Part Numbers: WE12X10014, 103C7487, 1472898, AH2350043, EA2350043, AP4379804, PS2350043, WE12X0042, WE12X0082, WE12X42, WE12X42-, WE12X42P, WE12X42R, WE12X82, WE12X82E, WE12X82P, WE12X82R, 132C7487P004     California Residents only WARNING: California’s Proposition 65 

Read more less

XPARTCO 6602-001655 Dryer Drum Belt The XPARTCO 6602-001655 is an aftermarket replacement dryer drum belt compatible with select Samsung and Kenmore dryers. The drum belt wraps around the outside of the dryer drum, loops around the motor pulley and idler pulley, and drives the drum to rotate during every drying cycle. Without a functioning belt, the drum cannot spin and clothes will not tumble or dry. Made from premium neoprene rubber reinforced with polyester cords, this 5-rib belt measures 92 inches long x 5/16 inch wide and is built to resist cracking, stretching, and wear under the high heat and repeated tension cycles of daily dryer use. It is a direct drop-in replacement for OEM part numbers 6602-001655 and 6602-001314, and installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO 6602-001655 Dryer Drum Belt fixes dryers where the drum is not spinning, clothes are not tumbling, or a thumping/squealing noise is coming from the dryer during operation. It drives the drum via the motor and idler pulleys. Compatible with select Samsung and Kenmore dryers. Measures 92" L x 5/16" W with 5 ribs and 4 grooves. Common Problems This Part Fixes Dryer drum not spinning — motor runs but drum stays still Clothes not tumbling during the drying cycle Thumping, squealing, or slapping noise during operation Dryer runs but produces no heat because drum is stationary Visible broken or frayed belt pieces found inside the dryer cabinet Dryer shuts off shortly after starting due to drum not rotating Replaces Part Numbers This drum belt directly replaces the following OEM and cross-reference part numbers: 6602-001655, 6602-001314, 5PH2337, LB1655, ASM874658, PD00002012, EAP2407938, AP4373659, PS4133825. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drum belt is compatible with select dryers from the following brands: Samsung dryers (gas and electric) Kenmore / Sears dryers (select models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Drives the dryer drum via the motor pulley and idler pulley for smooth, consistent tumbling every cycle 92" length x 5/16" width — 5-rib, 4-groove design for a secure, slip-free grip on the pulleys Made from premium neoprene rubber with polyester cord reinforcement — resists cracking, stretching, and heat damage Direct replacement for OEM part numbers 6602-001655 and 6602-001314 — no modification required Aftermarket replacement built to OEM-equivalent quality standards DIY-friendly repair — installs in 30–45 minutes with basic hand tools Often replaced together with the idler pulley (DC93-00634A) and drum rollers (DC97-16782A) for a complete drum drive repair Product Specifications Part Number 6602-001655 Part Type Dryer Drum Drive Belt Condition Aftermarket Replacement Application Gas and Electric Dryers Length 92 inches Width 5/16 inch Height 1/8 inch Ribs 5 ribs, 4 grooves Material Neoprene rubber with polyester cord reinforcement Color Black Compatible Brands Samsung, Kenmore Often Replaced With DC93-00634A Idler Pulley, DC97-16782A Drum Rollers Installation Notes ⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. To access the drum belt, remove the top panel and front panel of the dryer. Lift the drum out of the cabinet, remove the old belt, and loop the new 6602-001655 belt around the drum with the ribbed side facing inward. Route the belt slack around the idler pulley and motor pulley — consult your dryer's service manual or a model-specific video for the correct belt path around the pulleys. Reassemble the front panel, top panel, and restore power before running a test cycle. Tip: While the drum is out, this is an ideal time to also inspect and replace the idler pulley and drum support rollers if worn. Tools needed: Phillips screwdriver, putty knife or flat pry tool. Frequently Asked Questions Will the 6602-001655 fit my Samsung or Kenmore dryer? This belt is compatible with select Samsung and Kenmore dryers. Use the model search above to verify your model number, or contact our support team before ordering. What does the dryer drum belt do? The drum belt wraps around the outside of the dryer drum and connects to the motor pulley and idler pulley. As the motor spins, it drives the belt which causes the drum to rotate, tumbling your clothes through the heated air to dry them. A broken or worn belt means the drum cannot spin. How do I know if my drum belt is broken? The most obvious sign is that the dryer motor runs and you can hear it humming, but the drum does not spin. You may also hear a thumping or slapping sound if the belt is slipping or partially broken. Opening the dryer cabinet and visually inspecting the belt will confirm if it is broken, frayed, or stretched. Should I replace the idler pulley and drum rollers at the same time? Yes — since you need to disassemble the dryer to replace the belt anyway, it is highly recommended to also inspect and replace the idler pulley (DC93-00634A) and drum support rollers (DC97-16782A) at the same time. These parts wear at a similar rate and replacing all three together prevents having to disassemble the dryer again in the near future. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is made from premium neoprene rubber with polyester cord reinforcement to match the dimensions and performance of the original belt. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO W10131172 Dryer Drive Belt - Compatible with Whirlpool, Maytag, Kenmore Product Description Restore your dryer’s tumbling action with the XPARTCO W10131172 Dryer Drive Belt. This replacement drive belt is designed for select Whirlpool, Maytag, Kenmore, and other compatible dryers, providing a cost-effective alternative to the original. It connects the motor to the drum, ensuring smooth rotation during the drying cycle. This part addresses issues like the drum not spinning, unusual noises (e.g., squeaking or thumping), or the dryer stopping mid-cycle, often caused by a worn, stretched, or broken belt. Note: Includes (1) dryer drum belt. Disconnect power before installation. Verify compatibility with your dryer model. Replaces part numbers: WPW10131172, W10131172, 1449763, PD00003839, EAP11748749, AP6015470, PS11748749. Compatibility: Compatible with select dryer models, including but not limited to: Whirlpool: 3LCED9100WQ0, 3LCED9100WQ1, 3LCED9100WQ2, 7MGGW9200MW3, 7MWGD8300SW1, 7MWGD8500SR1, WED6200SW1, WED8000DW3, WED8300SW0, MEDB880BW0 Maytag: 7MMGDB850WL0, MVWC565FW0 Kenmore: 110.6007299, 110.6093699, 110.7095299 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, and other dryers. 🔧 Specifications: Replacement 5-rib belt, rubber construction, approximately 92-3/4" long. 💪 Reliable Performance: Ensures smooth drum rotation for consistent drying. 🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 20–30 minutes. 🛡️ Effective Fixes: Resolves drum not spinning, squeaking noises, or mid-cycle stopping. Product Specification Part Number: XPW10131172 Component Type: Dryer drive belt Material: Rubber Dimensions: Approximately 92-3/4" L x 5/16" W, 5 ribs Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running smoothly today! Add to cart now for a reliable fix!

Read more less

XPU6602-001655 Dryer Drum Belt (Made in USA) 5 Rib, 92" Drum Belt Replaces:  6602-001655, 6602-001314, AP4373659, PS4133825. This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO W10205415 Dryer Drum Belt Replaces WPW10205415 The XPARTCO W10205415 Dryer Drum Belt is a high-quality aftermarket replacement designed to restore proper drum rotation in compatible dryers. The belt wraps around the dryer drum, connects with the motor pulley and idler pulley, and allows the drum to tumble clothes during the drying cycle. Manufactured with durable reinforced rubber, this 5-rib, 4-groove belt is built to withstand heat, tension, and everyday dryer use. It measures approximately 92 inches long and 3/8 inch wide, making it a direct replacement for W10205415 and WPW10205415. Quick Answer The XPARTCO W10205415 Dryer Drum Belt fixes dryers where the drum is not spinning, clothes are not tumbling, or the dryer runs but does not dry properly. It fits select Whirlpool, Maytag, Amana, Samsung, Kenmore, KitchenAid, Inglis, Crosley, and Caloric dryers. Common Problems This Part Fixes Dryer drum not spinning while the motor runs Clothes not tumbling during the drying cycle Dryer runs but clothes remain wet Squealing, thumping, or slapping noise during operation Broken, loose, stretched, or worn dryer belt Visible belt pieces inside the dryer cabinet Replaces Part Numbers This dryer drum belt replaces the following OEM and cross-reference part numbers: W10205415, WPW10205415, 35001137, 6602-001314, 1937372, AWP49503, PD00003618, AP5178009, PS3494357. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drum belt is compatible with select dryers from the following brands: Whirlpool dryers Maytag dryers Amana dryers Samsung dryers Kenmore / Sears dryers KitchenAid dryers Inglis dryers Crosley dryers Caloric dryers ⚠️ This compatibility list includes many supported models but may not be complete. Always verify your appliance model number before ordering. If you're unsure, our support team is ready to help confirm fitment. Model Cross Reference Use the Model Cross Reference section on this product page to search your appliance model number and confirm fitment. Exact model matches will show a ✓ Guaranteed Fit badge. When Should You Replace This Belt? Drum stops spinning but motor still runs You hear a snapping sound during operation Belt appears cracked, frayed, or stretched Dryer suddenly stops tumbling mid-cycle Clothes come out wet due to lack of tumbling Key Features Restores proper dryer drum rotation and tumbling 92 inch length x 3/8 inch width 5-rib, 4-groove design for secure grip Durable reinforced rubber construction Direct replacement for W10205415 and WPW10205415 Compatible with select gas and electric dryers Aftermarket replacement built to OEM-equivalent standards Product Specifications Part Number W10205415 Replaces WPW10205415 Part Type Dryer Drum Drive Belt Condition Aftermarket Replacement Application Gas and Electric Dryers Length 92 inches Width 3/8 inch Ribs 5 ribs, 4 grooves Material Reinforced rubber Color Black Compatible Brands Whirlpool, Maytag, Amana, Samsung, Kenmore, KitchenAid, Inglis, Crosley, Caloric Installation Notes ⚠️ Safety First — Disconnect Power Before Servicing Unplug the dryer from the power source before starting the repair. For gas dryers, shut off the gas supply. Remove the top and front panels to access the drum. Remove the old belt and install the new W10205415 belt around the drum with the ribbed side facing inward. Route the belt around the idler pulley and motor pulley, then reassemble the dryer and run a test cycle. Frequently Asked Questions Is W10205415 the same as WPW10205415? Yes. WPW10205415 is the updated OEM part number that replaces W10205415. This aftermarket belt is compatible with both part numbers. How do I know if my dryer belt is broken? A common sign is that the dryer motor runs, but the drum does not spin. You may also hear a thumping or slapping sound if the belt is loose, frayed, or partially broken. Will this belt fit my Kenmore dryer? Many Kenmore dryers are manufactured by Whirlpool and may use this belt. Use the Model Cross Reference search section to verify your exact model before ordering. Is this an OEM part? This is a high-quality aftermarket replacement part built to match OEM-equivalent dimensions and performance standards. It is not a genuine Whirlpool OEM part. Shop With Confidence Parts-O-Matic is a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse. Our team is available to help you verify compatibility before you buy. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

W11568627 Genuine OEM Dryer Drum Belt - Compatible with Whirlpool, Maytag, Kenmore Product Description Restore your dryer’s tumbling action with the W11568627 Genuine OEM Dryer Drum Belt. This Whirlpool-manufactured belt is designed for select Whirlpool, Maytag, Kenmore, and other compatible dryers. It connects the motor to the drum, ensuring smooth rotation during the drying cycle. This part addresses issues like the drum not spinning, unusual noises (e.g., squeaking or thumping), or the dryer stopping mid-cycle, often caused by a worn, stretched, or broken belt. Note: Includes (1) dryer drum belt. Disconnect power before installation. Verify compatibility with your dryer model. Replaces part numbers: W11568627, W10577771, PD00070745, EAP16660508, AP7175918, PS16660508. Compatibility: Compatible with select dryer models, including but not limited to: Whirlpool: WED5010LW0, WED4950EW0, WED4950EW1, WED4950EW2, WED4950EW3 Maytag: MED4950DW0, MED4950DW1, MED4950DW2, MED4950DW3 Kenmore: 110.67022610, 110.67022611, 110.67022612, 110.67022613 Amana: NED4950EW0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, Amana, and other dryers. 💪 Reliable Performance: Ensures smooth drum rotation for consistent drying. 🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 20–30 minutes. 🛡️ Effective Fixes: Resolves drum not spinning, squeaking noises, or mid-cycle stopping. Product Specification Part Number: W11568627 Component Type: Dryer drum belt Material: Rubber Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running smoothly today! Add to cart now for a reliable fix!

Read more less

8547168 Dryer Drum Belt - Compatible with Whirlpool, Maytag, Kenmore replaces WP8547168 Product Description Restore your dryer’s performance with the 8547168 replaces WP8547168 Dryer Drum Belt. This replacement dryer drive belt is designed as a replacement for select Whirlpool, Maytag, Kenmore, KitchenAid, and other compatible dryers, offering a cost-effective alternative to the original. It connects the motor to the drum, enabling smooth rotation to tumble clothes during the drying cycle. This part addresses issues like the drum not spinning, unusual noises (e.g., squeaking or thumping), or the dryer stopping mid-cycle, often caused by a worn, stretched, or broken belt. Note: Includes (1) 4-rib dryer drum belt. Disconnect power before installation. Verify compatibility with your dryer model. Replaces part numbers: WP8547168, 8547168, 1180091, LB7168, 935H4, WP8547168VP, PD00002997, EAP11746376, AP6013154, PS11746376. Compatibility: Compatible with select dryer models, including but not limited to: Whirlpool: WED6200SW0, WED6200SW1, WED6400SB0, WED6400SW0, WED6400SW1, WGD6200SW0, WGD6200SW1, WGD6400SB0, WGD6400SW0, WGD6400SW1, WGD6600VU0, YWED6200SW0, YWED6400SW0 Maytag: MGD6300TQ0, MGD6300TQ1 Kenmore: 110.67032600, 110.67042600, 110.67852600 KitchenAid, Amana, Jenn-Air, Roper, Estate, Admiral, Magic Chef: Various models (verify with model number) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn-Air, Roper, Estate, Admiral, and Magic Chef dryers. 🔧 Specifications: 4-rib belt, rubber construction, approximately 93.5". 💪 Reliable Performance: Ensures smooth drum rotation for consistent drying. 🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 20–30 minutes. 🛡️ Effective Fixes: Resolves drum not spinning, squeaking noises, or mid-cycle stopping. Product Specification Part Number: 8547168 Component Type: Dryer drum belt Material: Rubber Dimensions: Approximately 93.5" Compliance: Prop 65 warning for California. Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running smoothly today! Add to cart now for a reliable fix!

Read more less

XPARTCO 6602-001717 Dryer Drum Belt The XPARTCO 6602-001717 is an aftermarket replacement drum belt for Samsung 24-inch compact dryers. The belt wraps all the way around the outside of the drum, passes under the idler pulley, and loops around the motor pulley — as the motor turns, the belt drags the drum around with it. There is no other mechanical connection between the motor and the drum, which is why a broken belt produces the classic symptom set: the dryer powers on, the console lights up, the motor hums and the blower runs, but the drum sits completely still. Reach in and spin the drum by hand and it will turn freely with no resistance at all. Samsung specifies this belt as "BELT-TIMING GEAR; 5PH2010, RUBBER, T2.7" — a 5-rib PH-profile belt, 2010 mm long (approximately 79-1/8 inches), 2.7 mm thick, in reinforced rubber. This is a compact-platform belt used on 24" Samsung dryers, and it is physically shorter than the 6602-001655 (5PH2337) belt used on Samsung's full-size 27" dryers. Belts fail from age and heat: the rubber hardens, the ribs glaze over and start slipping, and eventually the belt cracks through or snaps outright. Frayed edges, a squealing or thumping noise that tracks drum rotation, or black rubber dust in the cabinet are all signs the belt is on its way out. Installs in 45–90 minutes with basic hand tools. Quick Answer The XPARTCO 6602-001717 Dryer Drum Belt fixes Samsung 24" compact dryers where the motor runs but the drum won't turn, the drum spins freely by hand, or the dryer squeals, thumps, or rumbles during operation. 5 ribs, PH profile, 2010 mm (~79-1/8") long, 2.7 mm thick, reinforced rubber. Also marked 5PH2010. Fits DV22K6800EW and DVE22N6850 compact platforms. Not the same belt as the full-size 6602-001655 / 5PH2337 — that one is over a foot longer. Common Problems This Part Fixes Dryer runs and hums but the drum does not turn — the classic broken belt symptom Drum spins freely by hand with no resistance when the door is open Loud squealing or screeching that starts as soon as the cycle begins Rhythmic thumping or slapping noise timed to drum rotation — cracked or split belt Grinding or rumbling from inside the cabinet as a frayed belt drags Drum turns slowly, intermittently, or stalls under a heavy wet load — glazed belt slipping Clothes not drying because the drum isn't tumbling to expose them to airflow Black rubber dust or belt fragments found in the bottom of the cabinet Visible cracking, fraying, glazing, or stretching on the old belt Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer drum belt directly replaces the following OEM and cross-reference part numbers: 6602-001717, 6602001717, 5PH2010, SAM6602-001717, AP5623743, EAP4133826, ASM30222, PD00060820, PS4133826. Samsung has not superseded this belt with a newer number, so the cross-reference list is intentionally short. 5PH2010 is the belt's size designation rather than a separate part number, and it is often stamped on the belt itself — if your old belt is marked 5PH2010, this is the correct replacement. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Heads up on bad cross-reference data: A number of online listings for 6602-001717 have incorrect cross-references copied onto them from a completely unrelated Frigidaire belt — numbers such as 134163400, AP3865318, 148270, PS1148434, and 5303283471, along with a long list of Frigidaire GLER, FDE, FER, and GLGQ model numbers. Those numbers do not apply to this Samsung belt and those Frigidaire dryers do not use it. If you arrived here from a listing showing those numbers, verify against your Samsung model number before ordering. Compatibility This drum belt is compatible with select Samsung 24-inch compact dryers, including: Samsung DV22K6800EW/A1 and DV22K6800EW/AC compact electric dryers Samsung DV22K6800EW series (all sub-variants) Samsung DVE22N6850X and DVE22N6850 series compact electric dryers Samsung DV22N6800 series compact dryers Select Samsung-built compact dryers sold under other retail labels These are Samsung's 24" ventless and compact-footprint dryers, commonly installed in apartments, condos, closets, and stacked laundry towers where a full-size 27" dryer will not fit. Note — compact platform only: The 6602-001717 is a 2010 mm belt for 24" compact Samsung dryers. It is NOT interchangeable with the 6602-001655 (5PH2337) belt used on Samsung's full-size 27" dryers such as the DV42H, DV45H, DV40J, DV48H, DV48J, and DV50K series — that belt is 2337 mm, roughly 13 inches longer. A full-size belt will hang loose on a compact drum and slip immediately; a compact belt will not stretch far enough to reach around a full-size drum. Measure your old belt or check your model number before ordering. Contact our support team with your model number if you're unsure. Key Features Aftermarket replacement drum belt for Samsung 24" compact dryers — transfers motor rotation to the drum 5-rib PH-profile design matched to the compact-platform motor pulley and idler 2010 mm circumference (approximately 79-1/8 inches) — the correct compact-dryer length 2.7 mm thickness in reinforced rubber for heat resistance and long service life Also identified by its size marking 5PH2010, often stamped on the original belt Resolves "motor runs but drum won't turn," "squealing," "thumping," and "drum spins freely by hand" symptoms Multi-rib construction grips the motor pulley without slipping under heavy wet loads Direct drop-in replacement — no cutting, splicing, or modification required Aftermarket replacement built to OEM-equivalent quality standards Straightforward DIY repair — installs in 45–90 minutes with basic hand tools Product Specifications Part Number 6602-001717 OEM Part Number 6602-001717 Size Designation 5PH2010 Part Type Dryer Drum Drive Belt Condition Aftermarket Replacement Application Samsung 24" Compact Dryers Length 2010 mm (approx. 79-1/8 in.) Ribs 5 Profile PH (multi-rib) Thickness 2.7 mm Material Reinforced rubber Color Black Rib Orientation Ribbed side faces the drum Quantity 1 belt Compatible Brand Samsung Installation Notes ⚠️ Unplug Dryer Before Starting — Note Belt Orientation And Idler Routing Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves — the sheet metal edges inside the cabinet are sharp. Before you start, take a photograph of how the old belt routes around the drum, under the idler pulley, and around the motor pulley. If the belt is already broken and you cannot see the original routing, note that the ribbed side of the belt faces toward the drum on this platform, with the smooth back side riding against the idler pulley. Access on Samsung compact dryers is typically through the front: remove the top panel, then the control panel and front panel, which lets you lift the drum out or tilt it forward far enough to work. Vacuum out accumulated lint while the cabinet is open — lint buildup around the motor and idler is what cooks belts prematurely. With the drum accessible, slip the new belt around the drum roughly one-third of the way back from the front lip, ribbed side against the drum surface, and seat it in the wear track left by the old belt. Reach underneath, route the belt under the idler pulley, then loop it around the small motor pulley. A useful trick: tape the belt loosely in position on the drum with a strip of masking tape before you reach underneath, so it doesn't slide off while you're working the idler. Once seated, rotate the drum several full turns by hand and confirm the belt tracks straight and stays centered in its groove without walking toward the edge. While you are in there, spin the idler pulley and the drum rollers by hand — if either is noisy, gritty, or wobbly, replace them now, because a seized idler or worn roller will destroy the new belt in short order. Reassemble, restore power, and run a short empty cycle listening for squeal or thump before putting a load in. Tools needed: Phillips screwdriver, nut driver or socket set, putty knife, masking tape, flashlight, work gloves. Frequently Asked Questions How do I know for sure the belt is broken and not the motor? Open the door with the dryer unplugged and try to spin the drum by hand. With an intact belt you will feel firm resistance — you're turning the motor and idler through the belt. If the drum spins freely and easily, coasting like a bicycle wheel, the belt is broken or has come off its pulleys. The other tell is sound: with a broken belt the motor hums and the blower whooshes normally, so you hear a dryer that sounds like it's running perfectly while the drum sits still. A failed motor, by contrast, usually buzzes and does nothing, or trips the breaker. Which way do the ribs face on this belt? On this Samsung compact platform the ribbed side faces toward the drum, so the ribs grip the drum surface and the smooth back of the belt rides against the idler pulley. This is worth stating plainly because belt orientation is not universal across brands — some Whirlpool-platform dryers run the grooves against the motor pulley instead. Photograph your old belt before removing it whenever possible; the wear track polished into the drum will also show you exactly where the belt is meant to sit. Will the full-size Samsung belt work if I can't find this one? No. The full-size Samsung belt is 6602-001655, marked 5PH2337 — it is 2337 mm long against this belt's 2010 mm, a difference of about 13 inches. On a compact drum that extra length leaves the belt slack, so the idler cannot take up the tension and the belt slips or walks straight off the pulley. Going the other direction, a compact belt simply will not reach around a 27" drum. The rib count and profile are the same, which is exactly why these two get mixed up — always confirm the length. My dryer squeals but the drum still turns. Is it the belt or something else? It could be either, and it's worth diagnosing before you order. A glazed or hardening belt squeals as it slips on the motor pulley, usually loudest at startup and under a heavy wet load. But a dry or failing idler pulley bearing produces a very similar squeal, and worn drum rollers add a low rumble. With the dryer open, spin the idler and each roller by hand: they should turn smoothly and silently. If they're gritty, noisy, or have side-to-side play, replace them along with the belt — the parts share the same teardown, so doing them together saves you from opening the cabinet twice. Why did my belt break in the first place? Most often heat and age — rubber hardens over years of thermal cycling until it cracks. But two things dramatically accelerate it. Restricted airflow from a lint-clogged vent makes the cabinet run far hotter than designed, cooking the belt. And a seized idler pulley or a flat-spotted drum roller forces the belt to drag against a stationary surface, which shreds it quickly. If your belt failed early, clean the vent ducting end to end and inspect the idler and rollers before assuming the new belt will simply last. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the dimensions (2010 mm length, 2.7 mm thickness), 5-rib PH profile, reinforced rubber construction, and drum-drive function of the original 6602-001717 belt used in compatible Samsung 24" compact dryers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine Whirlpool WPW10131172 Dryer Drive Belt - Compatible with Admiral, Amana, Maytag, Whirlpool Product Description Ensure efficient drying with the Genuine Whirlpool WPW10131172 Dryer Drive Belt. This OEM drive belt is designed for select Admiral, Amana, Crosley, Inglis, Maytag, and Whirlpool dryers, driving the drum to ensure proper rotation and consistent performance. Made of durable rubber, it delivers reliable tension and flexibility, addressing issues like the drum not spinning, excessive noise, or failure to start. Note: Includes one drive belt. Disconnect power and gas (if applicable) before installation. Inspect drum rollers and idler pulley for wear during replacement. Replaces part numbers: WPW10131172, W10131172, 1449763, PD00003839, EAP11748749, AP6015470, PS11748749. Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Admiral, Amana, Crosley, Inglis, Maytag, and Whirlpool dryers. 🔄 Specifications: OEM rubber drive belt, 4 ribs, 3 grooves. 💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability and proper tension. 🛠️ Easy Installation: Requires screwdriver, socket wrench, and work gloves; typically installed in 20–30 minutes. 🛡️ Effective Fixes: Resolves drum not spinning, excessive noise, or failure to start issues. Product Specification Part Number: Genuine Whirlpool WPW10131172 Component Type: Dryer drive belt Material: Rubber Mounting: Tension-mounted around drum and motor pulley Operating Conditions: Suitable for household and commercial dryer environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source and gas supply (if applicable) before installation. Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your dryer running smoothly today! Add to cart now for a reliable fix!

Read more less