WB27X10880 Genuine OEM Microwave Magnetron
Description: This Magnetron is an OEM replacement part responsible for generating the microwave energy that heats and cooks your food. Located within the microwave's cooking chamber, typically behind the control panel and connected to the waveguide, the magnetron emits high-frequency microwaves, which are then distributed throughout the cooking cavity. This electromagnetic radiation excites water molecules in the food, causing them to heat up and cook the food quickly and efficiently.
Replaces Part Numbers: WB27X10880, 1167227, AH1019593, EA1019593, AP3860541, PS1019593.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPG499 Microwave Door Switch (Normally Closed)
The XPG499 is a universal replacement normally closed (NC) door interlock switch for microwave ovens and microwave/oven combination units. This is a critical safety component: microwave door interlock switches exist specifically to cut power to the magnetron the instant the door opens, preventing any possibility of microwave radiation escaping the cavity while the door isn't fully closed and latched. This switch's normally closed contact design matches a wide range of microwave door latch mechanisms across GE, Whirlpool, Samsung, LG, Kenmore, and other brands.
Rated 16A, 125/250VAC. Over time, this switch's contacts can wear, pit, or fuse together from repeated cycling and the electrical load carried every time the door opens and closes. A failing interlock switch typically shows up as a microwave that won't start at all, a display that works but the unit won't heat, or intermittent operation tied to the door latch area. This is the normally closed counterpart to our EXP497 (normally open) and EXP480 (combined NC/NO) listings — always confirm which specific contact configuration your microwave's failed switch uses before ordering.
Quick Answer
The XPG499 Microwave Door Switch (Normally Closed) fixes microwave ovens and microwave/oven combos that won't start, won't heat, or operate intermittently near the door latch area. 16A, 125/250VAC, normally closed (NC) contact design. Never operate a microwave with a bypassed, disconnected, or suspected-faulty door interlock switch — these switches exist to prevent radiation exposure and must always be replaced with a properly rated part, never removed or defeated.
Common Problems This Part Fixes
Microwave won't start at all, even though the display and buttons respond normally
Microwave display and timer work, but the unit won't heat
Microwave stops working intermittently, especially around the door latch
Clicking or buzzing sound from the door area without the microwave starting
Breaker tripping when the door is opened, indicating a switch contact that has fused shut
Door that doesn't feel like it's latching securely
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This microwave door switch directly replaces the following OEM and cross-reference part numbers:
WB24X830, AH237422, EA237422, WB24X0800, WB24X0830, WB24X10075, WB24X800, AP2024338, PS237422, WB24X25397, WB24X817, WB24X10112, WB24X0817, AP6037282, PS11766871, 00606695, 1386420, 606695, AH3477007, EA3477007, AP4067354, PS3477007, PS8726632, 5304408937, 5304509459, 5304464098, 4583655, AP6230614, PS12071302, ANE61784L0AG, AP7040623, WB24X10205, WB24X10147, 251201600930, 3025959, AP5790849, PS8754455, W10269458, W10211973, 1550016, 4393598, 8206347, AH2361111, EA2361111, AP4429884, PS2361111, 6600W1K001C, AP4650823, PS3529293, WB24X824, 253814, WB24X0824, AH237416, EA237416, AP2024332, PS237416, 5304456101, 1198245, 75304456101, AH1532505, EA1532505, AP3960662, PS1532505, 6600W1K001R, 1583495, AH3598700, EA3598700, AP5254801, PS3598700, 3405-001033, DE34-20019A, WP3405-001033, 2028596, 3405-000176, AP4044665, PS4131191, WB24X804 253795, WB24X0422, WB24X0804, WB24X422, AH237397, EA237397, AP2024313, PS237397, WB24X10189, 1810588, AH3486597, EA3486597, AP4980349, PS3486597, 3B73361E, 1325767, 3B73361D, 6600W1K003C, 6600W1K004B, AH3522736, EA3522736, AP4629337, PS3522736, 4415A66600, 1206671, 4415A66610, GSM-V1602A2, AP5322919
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door switch is a universal replacement compatible with convection microwave ovens, grill microwave ovens, microwave/oven combination units, and solo microwave ovens across many brands including GE, Whirlpool, Samsung, LG, and Kenmore, wherever the original switch matches this normally closed (NC) contact configuration and electrical rating.
Note: Microwave door interlock systems typically use two or three separate switches working together (primary interlock, monitor/secondary switch, and sometimes a third safety switch), and not all of them share this same normally closed (NC) configuration. This is a different part from our EXP497 (normally open) and EXP480 (combined NC/NO) listings. Confirm which specific switch position has failed on your microwave, and match the contact configuration and electrical rating exactly — never substitute a switch with a different configuration. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which switch your microwave needs.
Key Features
Universal replacement microwave door interlock switch — normally closed (NC) contact design
Resolves "won't start," "won't heat," and "intermittent operation near the door latch" symptoms caused by switch failure
Rated 16A, 125/250VAC
Suitable for convection, grill, combination, and solo microwave ovens
Direct drop-in replacement matching the original mounting and terminal configuration
Replaces a wide range of OEM part numbers across GE, Whirlpool, Samsung, LG, and Kenmore platforms — see full list above
Built to OEM-equivalent quality standards
Product Specifications
Part Number
XPG499
Part Type
Microwave Door Interlock Switch (Normally Closed)
Condition
New — Universal Replacement Part
Contact Configuration
Normally Closed (NC)
Max. Current
16A
Max. Voltage
125/250VAC
Terminal Size
4.7mm
Application
Convection, Grill, Combination, and Solo Microwave Ovens
Related Parts
EXP497 (normally open)
Quantity
1 door interlock switch
Installation Notes
⚠️ Danger — Never Bypass A Door Interlock Switch Unplug the microwave before beginning any work, and if it's a built-in or over-the-range unit, shut off power at the breaker as well. Microwave ovens also contain a high-voltage capacitor that can retain a dangerous electrical charge even after the unit is unplugged — avoid touching internal components near the capacitor and magnetron. Door interlock switches are a critical safety system: they exist specifically to cut power the instant the door opens, preventing microwave radiation from escaping the cavity. Never operate a microwave with an interlock switch disconnected, bypassed, or jumpered, even temporarily — doing so can expose you and others to microwave radiation. If you are not fully comfortable working inside a microwave's internal compartment, have a qualified appliance technician perform this repair instead.
⚠️ Photograph Wiring Before Disconnecting — Match The Failed Switch Exactly Wear work gloves. Remove the outer cabinet or access panel per your model's service instructions to reach the door switch assembly, typically located near the door latch mechanism. Photograph the wiring on the old switch before disconnecting anything, and confirm you're replacing the correct switch position if your microwave uses multiple interlock switches. Disconnect the wire terminals from the old switch, remove its mounting screws, and pull it free. Install the new XPG499 in the same position, reconnect each wire terminal to its original position, and secure the mounting screws. Reinstall the cabinet or access panel. Restore power and test that the microwave starts normally with the door closed, and — this is the critical safety check — confirm the unit stops heating immediately when the door is opened during a test run with a cup of water. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My microwave stopped working. How do I know if it's actually a door switch and not something else?
A common pattern is a microwave where the display and buttons respond normally, but pressing start does nothing, or the unit hums without heating — this points toward the door interlock circuit rather than the control board. Since these switches also serve a critical safety function, if you suspect a fault in this area, it's best to have it properly diagnosed and replaced rather than working around the symptom.
Is it safe to just disconnect a faulty interlock switch so the microwave will run?
No — this is not safe under any circumstances. Door interlock switches exist specifically to cut power to the magnetron the instant the door opens, preventing microwave radiation from escaping. Bypassing, disconnecting, or jumpering one of these switches removes that protection and can expose you and anyone nearby to microwave radiation, even if the microwave otherwise appears to run normally. Always replace a faulty switch with a correctly rated new one rather than working around it.
How is this different from your EXP497 and EXP480 listings?
These are different contact configurations for different switch positions in a microwave's door interlock system. This XPG499 is normally closed (NC) only. Our EXP497 listing is normally open (NO) only, and our EXP480 listing combines both NC and NO contacts in a single switch body. Since most microwaves use two or three interlock switches with different configurations, check which contact type your specific failed switch uses before ordering.
My microwave trips the breaker whenever I open the door. What does that mean?
This can indicate that one of the door switches has fused or welded its contacts shut from repeated electrical stress, so it continues carrying current when it shouldn't. This is a genuine safety concern and the affected switch should be replaced promptly rather than continuing to use the microwave.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DE47-20034A Microwave Genuine High Limit Thermostat
Thermal cutout.
High limit thermostat. Open for continuity at room temperature, closes when it gets hot.
Fits Samsung over counter microwaves.
Replaces Part Numbers:DE47-20034A, AP4219754, PS4226431.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO EXP480 Microwave Door Switch (NC - NO) Normally Closed / Open
The XPARTCO EXP480 is a universal replacement door interlock switch for microwave ovens and microwave/oven combination units. This is a critical safety component: microwave door interlock switches exist specifically to cut power to the magnetron the instant the door opens, preventing any possibility of microwave radiation escaping the cavity while the door isn't fully closed and latched. This switch combines both a normally closed (NC) and normally open (NO) contact set in a single body, matching the dual-contact design used across a wide range of microwave door latch mechanisms.
Rated 16A maximum current, 250VAC maximum voltage, with an IP40 protection rating. Over time, these switch contacts can wear, pit, or fuse together from repeated cycling and the electrical load they carry every time the door opens and closes. A failing interlock switch typically shows up as a microwave that won't start at all, a display that works but the unit won't heat, or in less common but more serious cases, a switch that has fused shut and continues carrying current even when it shouldn't. It directly replaces 28QBP0496, W10211972, 4375346, W10330566, WPW10330566, 1472224, 4393442, 4393498, 4393570, 4393697, 4393881, 461967848881, 8206345, W10131248, W10217468, AH2338920, EA2338920, AP4357880, PS2338920, KW3A-16Z0-A200-76, W10727360, W10269457, 3379124, AP5950105, and PS10057151.
Quick Answer
The XPARTCO EXP480 Microwave Door Switch (NC - NO) fixes microwave ovens and microwave/oven combos that won't start, won't heat, or have a door latch mechanism that isn't reliably cutting power when the door opens. 16A, 250VAC, combined NC/NO contact design. Replaces 28QBP0496, W10211972, 4375346, W10330566, WPW10330566, 1472224, 4393442, 4393498, 4393570, 4393697, 4393881, 461967848881, 8206345, W10131248, W10217468, AH2338920, EA2338920, AP4357880, PS2338920, KW3A-16Z0-A200-76, W10727360, W10269457, 3379124, AP5950105, PS10057151. Never operate a microwave with a bypassed, disconnected, or suspected-faulty door interlock switch — these switches exist to prevent radiation exposure and must always be replaced with a properly rated part, never removed or defeated.
Common Problems This Part Fixes
Microwave won't start at all, even though the display and buttons respond normally
Microwave display and timer work, but the unit won't heat
Microwave stops working intermittently, especially around the door latch
Clicking or buzzing sound from the door area without the microwave starting
Breaker tripping when the door is opened, indicating a switch contact that has fused shut
Door that doesn't feel like it's latching securely
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This microwave door switch directly replaces the following OEM and cross-reference part numbers:
28QBP0496, W10211972, 4375346, W10330566, WPW10330566, 1472224, 4393442, 4393498, 4393570, 4393697, 4393881, 461967848881, 8206345, W10131248, W10217468, AH2338920, EA2338920, AP4357880, PS2338920, W10727360, W10269457, 3379124, AP5950105, PS10057151
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door switch is a universal replacement compatible with convection microwave ovens, grill microwave ovens, microwave/oven combination units, and solo microwave ovens across many brands, wherever the original switch matches this NC/NO contact configuration and electrical rating.
Note: Microwave door interlock systems typically use two or three separate switches working together (primary interlock, monitor/secondary switch, and sometimes a third safety switch), and not all of them share this same NC/NO configuration. Confirm which specific switch position has failed on your microwave, and match the contact configuration and electrical rating exactly — never substitute a switch with a different configuration. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which switch your microwave needs.
Key Features
Universal replacement microwave door interlock switch — combined NC (normally closed) and NO (normally open) contact design
Resolves "won't start," "won't heat," and "intermittent operation near the door latch" symptoms caused by switch failure
Rated 16A, 250VAC maximum
IP40 protection rating
Safety approved: CCC, CE, UL, VDE
Suitable for convection, grill, combination, and solo microwave ovens
Direct drop-in replacement matching the original mounting and terminal configuration
Replaces a wide range of OEM part numbers across Whirlpool, GE, and related platforms — see full list above
Built to OEM-equivalent quality standards
Product Specifications
Part Number
EXP480
Part Type
Microwave Door Interlock Switch (NC/NO Combination)
Condition
New — Universal Replacement Part
Contact Configuration
Normally Closed (NC) + Normally Open (NO)
Max. Current
16A
Max. Voltage
250VAC
Operating Temperature
-25°C to +85°C
Protection Degree
IP40
Contact Form
SPDT
Terminal Size
6.3mm (approx. 1/4")
Operating Force
25g (0.245N) – 400g (3.92N)
Material
Plastic
Color
Gray
Safety Approvals
CCC, CE, UL, VDE
Application
Convection, Grill, Combination, and Solo Microwave Ovens
Quantity
1 door interlock switch
Installation Notes
⚠️ Danger — Never Bypass A Door Interlock Switch Unplug the microwave before beginning any work, and if it's a built-in or over-the-range unit, shut off power at the breaker as well. Microwave ovens also contain a high-voltage capacitor that can retain a dangerous electrical charge even after the unit is unplugged — avoid touching internal components near the capacitor and magnetron. Door interlock switches are a critical safety system: they exist specifically to cut power the instant the door opens, preventing microwave radiation from escaping the cavity. Never operate a microwave with an interlock switch disconnected, bypassed, or jumpered, even temporarily — doing so can expose you and others to microwave radiation. If you are not fully comfortable working inside a microwave's internal compartment, have a qualified appliance technician perform this repair instead.
⚠️ Photograph Wiring Before Disconnecting — Match The Failed Switch Exactly Wear work gloves. Remove the outer cabinet or access panel per your model's service instructions to reach the door switch assembly, typically located near the door latch mechanism. Photograph the wiring on the old switch before disconnecting anything, and confirm you're replacing the correct switch position if your microwave uses multiple interlock switches. Disconnect the wire terminals from the old switch, remove its mounting screws, and pull it free. Install the new EXP480 in the same position, reconnect each wire terminal to its original position, and secure the mounting screws. Reinstall the cabinet or access panel. Restore power and test that the microwave starts normally with the door closed, and — this is the critical safety check — confirm the unit stops heating immediately when the door is opened during a test run with a cup of water. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My microwave stopped working. How do I know if it's actually a door switch and not something else?
A common pattern is a microwave where the display and buttons respond normally, but pressing start does nothing, or the unit hums without heating — this points toward the door interlock circuit rather than the control board. Since these switches also serve a critical safety function, if you suspect a fault in this area, it's best to have it properly diagnosed and replaced rather than working around the symptom.
Is it safe to just disconnect a faulty interlock switch so the microwave will run?
No — this is not safe under any circumstances. Door interlock switches exist specifically to cut power to the magnetron the instant the door opens, preventing microwave radiation from escaping. Bypassing, disconnecting, or jumpering one of these switches removes that protection and can expose you and anyone nearby to microwave radiation, even if the microwave otherwise appears to run normally. Always replace a faulty switch with a correctly rated new one rather than working around it.
My microwave trips the breaker whenever I open the door. What does that mean?
This can indicate that one of the door switches — often the one that should open when the door opens — has fused or welded its contacts shut from repeated electrical stress, so it continues carrying current when it shouldn't. This is a genuine safety concern and the affected switch should be replaced promptly rather than continuing to use the microwave.
My microwave uses more than one door switch. How do I know which one to replace?
Most microwaves use two or three separate interlock switches working together, and they don't always share the same contact configuration. Check your appliance's parts diagram or the physical switch you're replacing to confirm it matches this NC/NO combination design before ordering, and always test or verify function with a multimeter if you're uncertain which specific switch has failed.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
EXPHV13 Microwave High Voltage Diode (Rectifier)
Replaces Part Numbers: W11256462, W10492278, W10886077, WPW10492276, WPW10575765, AP6784287, PS12584264, WPW10687786, W10687786, 4449228, AP6023790, PS11757136, 5304470521, AP4396425, PS2353199, WB27X10597, AH239740, EA239740, AP3192533, PS239740.
CL04-12A=500mA CL04-12 12kV
Description: This Diode Assembly is a replacement part for specific microwave models. It plays a crucial role in converting alternating current (AC) to direct current (DC), which is essential for the microwave’s high-voltage functions, including powering the magnetron to generate microwave energy. Over time, diodes can fail due to electrical surges, excessive heat, or wear and tear. A faulty diode assembly can lead to inefficient or non-functional microwave operation, impacting its ability to heat food properly.
EXPHV13 Microwave High Voltage Diode – OEM-Quality Replacement
Replace your faulty diode with the EXPHV13, a high-quality, aftermarket microwave high voltage diode rated for 12,000V / 500mA. It restores proper heating function and is compatible with many leading microwave brands.
Key Features:
✅ Rated for 12kV, 500mA
✅ Direct replacement for most standard microwaves
✅ Solves issues like no heat, humming, or tripped breakers
✅ Easy-to-install universal fit for GE, LG, Whirlpool, Panasonic, etc.
⚠️ Always disconnect power before installation. For compatibility questions, contact us—we’re happy to help!
📦 Part Number: EXPHV13💯 30-Day Money Back Guarantee
EXPMS33 Microwave Door Switch Set – Universal Replacement for GE, Whirlpool, Samsung, LG & Kenmore Microwaves
Product Description
Restore safe and reliable microwave operation with the EXPMS33 Microwave Door Switch Set. This high-quality aftermarket kit includes the commonly used microwave interlock door switches, designed to ensure the unit operates only when the door is fully closed. Failed or worn door switches can cause the microwave not to start, stop mid-cycle, blow fuses, or run intermittently. Replacing the complete switch set helps restore proper door sensing and safe microwave performance.
Note: All Switches are not the Same
Replaces all Following Microwave Door Switch Parts number and more:
Normally Closed Cross Reference Info: WB24X10075, WB24X800, WB24X830, WB24X0830, WB24X817, WB24X10112, FFSBA016 (No Fuse Included), 00606695, 5304408937
Normally open Cross Reference Info: 3B3362F, WB24X816, 6600W1K003C, QSWMA085WRE0, WB24X829, WB24X10180, 00606693, 00633795, WB23X10019, 241201600929, 5304408938.
Compatibility
This universal microwave door switch set fits many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, and Kenmore microwave ovens.
Commonly used in countertop, over-the-range, and built-in microwave models that use standard NO (Normally Open) and NC (Normally Closed) interlock switches.
Always confirm switch configuration and terminal layout before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement Set – Designed to match OEM electrical performance
🚪 Complete Door Interlock Solution – Includes multiple switches for proper safety operation
⚡ Reliable Electrical Contacts – Ensures consistent microwave startup
💪 Durable Construction – Built for repeated door open/close cycles
🛡️ Fixes Common Issues – Solves microwave not starting, stopping mid-cycle, or blowing fuses
📐 Product Specification
Part Number: EXPMS33
Component Type: Microwave Door Interlock Switch Set
Include Switch Types: 2 X Normally Open (NO) and 1 X Normally Closed (NC)
Voltage Rating: 125/250V AC | 16A, 1/2HP
Terminal Type: Spade terminals
Mounting: Snap-in brackets (model dependent)
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver
⚠️ Safety First: Unplug the microwave before servicing. Microwaves contain high-voltage components—always disconnect power before repair.
Steps:
Disconnect power from the microwave.
Remove the outer cover or control panel as required.
Locate the door switch housing near the latch assembly.
Remove old switches one at a time, noting wire positions.
Install the new EXPMS33 switches in the same locations.
Reassemble panels and restore power.
Test microwave operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore safe microwave operation — Add to Cart Now for a reliable, budget-friendly repair!
DE47-20059B Microwave Genuine Thermostat
Fits specific Samsung microwave models.
Replaces Part Numbers: DE47-20059B, 2079767, DE47-20059A, OEM18320450, AP4580112, PS4226453.Description: This Microwave Thermostat is an essential component for maintaining the optimal performance of your Samsung microwave. This genuine OEM part ensures precise temperature control, helping your appliance operate safely and efficiently. Designed specifically for Samsung microwave models, the thermostat guarantees a perfect fit and seamless integration with your existing system. By replacing a faulty or damaged thermostat with this high-quality part, you can restore your microwave's functionality and extend its lifespan. The Microwave Thermostat is built to withstand the demands of everyday use, providing reliable performance and consistent heating results. Easy to install, this thermostat allows you to perform repairs yourself, saving you time and the cost of professional service. Enhance your microwave reliability and enjoy peace of mind knowing you are using a genuine OEM part that delivers both quality and durability.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO WB27X11212 Microwave Thermostat – Compatible with GE, Hotpoint & Kenmore Microwaves
Product Description
Ensure safe microwave operation with the XPARTCO WB27X11212 Microwave Thermostat. This high-quality aftermarket replacement monitors internal temperatures and shuts off power if overheating is detected. A faulty thermostat can cause the microwave to shut off unexpectedly, fail to heat, or stop mid-cycle. Replacing it with this reliable XPARTCO thermostat restores proper temperature regulation and protects critical internal components.
Replaces Part Numbers
WB27X11212, 3026293, SE-7350-006, KSD201 - 120C, WB24X28948, WB27X10854, AP5791056, PS8754627.
Compatibility
This replacement microwave thermostat fits select GE, Hotpoint, and Kenmore microwave ovens.
Example compatible models include (but are not limited to):GE JVM1540DM5BB, JVM3160RFSSHotpoint RVM5160DHBBKenmore 363.62709300
Always verify your microwave’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM temperature-sensing performance
🌡️ Overheat Protection – Prevents damage by cutting power at unsafe temperatures
💰 Cost-Effective Repair – Reliable solution without OEM pricing
🛠️ Direct-Fit Design – Installs easily with existing mounting and wiring
🛡️ Fixes Common Issues – Solves random shut-offs, no-heat conditions, or thermal errors
📐 Product Specification
Part Number: WB27X11212
Component Type: Microwave Thermostat / Thermal Switch
Temperature Rating: OEM-equivalent cutoff
Material: Metal housing with bimetal thermal disc
Mounting: Screw-mounted
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, needle-nose pliers
⚠️ Safety First: Unplug the microwave and discharge high-voltage components before servicing. Microwave repairs involve HIGH VOLTAGE.
Steps:
Disconnect power and remove the microwave cover.
Locate the thermostat mounted near the magnetron or cavity.
Disconnect wires and remove mounting screws.
Install the new XPARTCO WB27X11212 thermostat.
Reconnect wiring, reinstall the cover, and restore power.
Test microwave operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Protect your microwave and restore safe operation — Add to Cart Now for a dependable, budget-friendly repair!
EXP15A Ceramic Microwave Fuse
Fast Blow 15A, 250V
Replaces Part Numbers:
WB27X7, 14QBP15CFB, AP2626454, PS240270, M0805102, AP6014670, WPM0805102, 3601-001197, PS4131368, AP4046099, PS239596, AP3189379, WB08T10027, WB2X8151, WB27X10454.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
