XPARTCO W10209656 Range Surface Igniter – Compatible with Whirlpool, Maytag, KitchenAid, and Kenmore Gas Ranges
Product Description
Restore reliable burner ignition with the XPARTCO W10209656 Range Surface Igniter. This high-quality aftermarket replacement provides the heat needed to ignite gas burners on your cooktop. A weak or failed igniter can cause burners not to light or take too long to ignite. Replacing it with this durable XPARTCO igniter restores instant ignition and safe cooking performance.
Replaces Part Numbers
WPW10209656, W10209656, 1468965, 98008959, 98012193, 98014514, 98014515, 98017561, 98017562, 98017917, W10112313, W10127479, AP6017135, PS11750430.
Compatibility
This replacement surface igniter is compatible with select Whirlpool, Maytag, KitchenAid, and Kenmore gas ranges.
Example compatible models include (but are not limited to): Whirlpool WFG320M0BS3, Maytag MGR6600FZ0, and Kenmore 665.75002100.
Always verify your range’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Compatible with Whirlpool-brand gas ranges
🔥 Reliable Ignition – Provides consistent spark for fast burner lighting
💰 Affordable Solution – Quality alternative to OEM parts at lower cost
🛠️ DIY Friendly – Installs easily with basic hand tools
🛡️ Fixes Common Issues – Solves burners not igniting or clicking without flame
📐 Product Specification
Part Number: W10209656
Component Type: Gas Range Surface Igniter
Material: High-temperature ceramic base and metal electrode
Mounting: Direct-fit replacement for surface burner assembly
Operating Conditions: Designed for standard household gas ranges
Compliance: Built to OEM-equivalent standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the range and shut off the gas supply before starting repairs.
Steps:
Disconnect power and shut off gas supply.
Remove burner grates and top panel to access the igniter.
Detach the wire connector and mounting screw from the old igniter.
Install the new XPARTCO W10209656 igniter and reconnect wires.
Reassemble burner components, restore power and gas, and test ignition.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Enjoy quick, reliable ignition every time — Add to Cart Now for a dependable, budget-friendly repair!
8053720 Range Genuine Surface Burner Igniter
Replaces: W11032529, 8053720, W10850843, W10896683, 3186479, 3186480, 3186482, 3186486, 4455849, AP6038814, PS11770331.
8053720 Range Surface Burner Igniter – Genuine OEM Replacement
Ensure reliable burner ignition on your gas range with the 8053720 Surface Burner Igniter. This Genuine OEM part provides the spark needed to ignite the burner quickly and safely.
Key Features:
✅ Replaces: W11032529, 8053720, W10850843, W10896683, 3186479, 3186480, 3186482, 3186486, 4455849, AP6038814, PS11770331.
✅ Compatible with Whirlpool, KitchenAid, Maytag, and more
⚡ Supplies consistent spark to surface burner
🛠️ Durable ceramic construction for long-lasting use
🧰 Easy to install – OEM fit and function
⚠️ Disconnect power and gas before installation. Need help confirming compatibility? Contact us!
📦 Part Number: 8053720
XPARTCO 00631633 Range Surface Burner Igniter Electrode
The XPARTCO 00631633 is an aftermarket replacement gas range surface burner igniter electrode (also called a spark electrode) compatible with select Bosch, Thermador, and Gaggenau gas ranges and cooktops in the HDI, HGI, NGM, NGMP, HDIP, and HGIP series. The surface burner igniter electrode is the ceramic-tipped spark generator located at each gas burner position on the cooktop. When the burner is turned on, the ignition system sends a high-voltage pulse to the electrode, which generates a spark across the ceramic tip to ignite the gas flowing from the burner. When the electrode cracks, chips, or becomes contaminated with grease or food residue, the burner may fail to light, click continuously without igniting, or spark intermittently.
This replacement electrode is constructed from high-quality ceramic and metal — the ceramic insulator body withstands the thermal cycling of repeated ignition, while the metal spark tip maintains reliable spark gap geometry over time. Sold individually — one electrode per order. It directly replaces AP5950372, 4162041, and PS10057850. Because a gas range typically has four or more burners with individual electrodes, compare your existing electrode's dimensions and mounting configuration before ordering to ensure a correct fit. Installs in minutes — no tools required in most cases.
Quick Answer
The XPARTCO 00631633 Range Surface Burner Igniter Electrode fixes Bosch, Thermador, and Gaggenau gas ranges where a surface burner won't light, clicks repeatedly without igniting, or sparks intermittently. Ceramic and metal construction. Sold individually — one electrode per order. Compatible with Bosch HDI, HGI, NGM, NGMP, HDIP, HGIP series. Replaces AP5950372, 4162041, PS10057850. Compare dimensions to your original before ordering — each burner position uses the same electrode style on compatible models.
Common Problems This Part Fixes
Gas burner will not light when the knob is turned
Burner clicks repeatedly without igniting the gas
Burner sparks intermittently — fires once or twice but does not sustain ignition
Igniter clicks continuously even when the burner knob is in the off position
One burner not lighting while other burners on the same range work normally
Electrode tip visibly cracked, chipped, or heavily contaminated with baked-on grease
Weak or inconsistent spark — arc not reaching the burner port reliably
Replaces Part Numbers
This igniter electrode directly replaces the following OEM and cross-reference part numbers:
00631633, 631633, ABS11789, AP5950372, EAP10057850, PD00044775, PS10057850
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This igniter electrode is compatible with select gas ranges and cooktops from the following brands and series:
Bosch gas ranges — HDI8054U, HDI8056U, HGI8046UC, HGI8054UC, HGI8056UC series
Bosch gas ranges — HDIP054U, HDIP056U, HGIP054UC, HGIP056UC series
Bosch gas cooktops — NGM5055UC, NGM5455UC, NGM5655UC, NGM8055UC, NGM8065UC, NGM8655UC, NGM8665UC, NGMP055UC, NGMP655UC series
Thermador gas ranges and cooktops (select models using the same electrode style)
Gaggenau gas ranges and cooktops (select models using the same electrode style)
Note: Before ordering, compare your existing igniter electrode's physical dimensions and mounting configuration to confirm this electrode is the correct fit for your burner position. Always verify your exact model number. If you are unsure, contact our support team with your model number for confirmation.
Key Features
Ceramic and metal spark electrode — generates the high-voltage spark that ignites the gas burner when the knob is turned
High-quality ceramic insulator body — withstands repeated thermal cycling without cracking under normal use
Durable metal spark tip — maintains reliable spark gap geometry for consistent ignition
Replaces AP5950372, 4162041, and PS10057850
Compatible with Bosch HDI, HGI, NGM, NGMP, HDIP, and HGIP series gas ranges and cooktops
Also compatible with select Thermador and Gaggenau gas ranges and cooktops
Sold individually — one electrode per order; order as many as needed for your burner positions
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in minutes, no special tools required in most cases
Product Specifications
Part Number
00631633
Also Known As
631633
Part Type
Gas Range Surface Burner Igniter Electrode (Spark Electrode)
Condition
Aftermarket Replacement
Application
Gas Ranges and Cooktops
Material
Ceramic / Metal
Color
White
Sold As
Single electrode — order quantity as needed
Compatible Brands
Bosch, Thermador, Gaggenau
Installation Notes
⚠️ Gas Appliance Safety Warning This part is used in gas ranges. Always turn off the gas supply at the shutoff valve and unplug the range from the electrical outlet before beginning any repair. If you smell gas at any point during or after installation, leave the area immediately and contact your gas utility provider. If you are not confident working on gas appliances, have this part installed by a qualified appliance technician.
⚠️ Unplug Range and Turn Off Gas Before Starting With the range unplugged and gas supply off, remove the cooktop grates and burner caps to access the burner heads. The igniter electrode is the small ceramic component positioned beside each burner head, held in place by a mounting bracket and screw or a snap-in clip depending on the model. Disconnect the single wire connector from the old electrode. Remove the mounting screw and lift the old electrode out. Install the new 00631633 electrode in the same position, secure the mounting screw, and reconnect the wire connector. Replace the burner caps and grates. Restore power and gas supply, then test each burner for reliable ignition. If the burner still does not light after replacing the electrode, inspect the igniter wire and the electronic ignition module. Tools needed: Phillips or Torx screwdriver (for mounting bracket on some models); no tools needed on models with snap-in electrodes.
Frequently Asked Questions
What does the surface burner igniter electrode do?
The igniter electrode is the component that creates the spark to light each gas burner. When you turn a burner knob past the "lite" position, the range's electronic ignition module sends a series of high-voltage pulses through the igniter wiring to the electrode at that burner. The electrode generates a visible spark across its ceramic tip to the grounded burner cap or burner head, and that spark ignites the gas flowing from the burner ports. Each burner position has its own dedicated electrode — failure of one electrode affects only that burner, while other burners on the same range continue to work normally.
My burner clicks constantly even when turned off — is it the electrode?
Constant clicking when a burner is in the off position is almost always caused by moisture or food residue in the igniter system rather than a failed electrode. When liquid boilover or steam gets into the burner cap area or electrode housing, it can cause the ignition module to fire continuously. Remove the burner cap and grate from the affected burner and allow everything to dry thoroughly — an hour in a warm oven (electric only, turned off) can help. Wipe the electrode tip clean with a dry cloth. If clicking persists after the components are completely dry and clean, the electrode or the ignition module may have been damaged by the moisture and needs replacement.
How many electrodes do I need for my Bosch range?
Most Bosch gas ranges have four surface burners, each with its own dedicated igniter electrode — so a full cooktop replacement typically requires four electrodes. This listing is for one electrode. If only one burner is not lighting, you likely only need one replacement. If multiple burners are failing, order one electrode for each affected burner. Because the electrodes on compatible Bosch models use the same part number across all burner positions, one order of multiple quantities covers all positions.
Can I clean the electrode instead of replacing it?
Yes — a contaminated or greasy electrode can often be cleaned successfully rather than replaced. Remove the electrode from the burner area and gently clean the ceramic tip and metal contact with a dry cloth or a soft toothbrush. Do not use water or liquid cleaners directly on the electrode — moisture in the ceramic can cause persistent clicking. If the ceramic body is cracked or the metal tip is corroded or missing, replacement is required. If the ceramic is intact and clean but the spark is still weak or absent, the electrode's spark gap geometry may have changed from thermal expansion and a replacement is the better fix.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Bosch OEM part, but is manufactured from high-quality ceramic and metal to match the dimensions and spark performance of the original 00631633 igniter electrode.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
1408 Gas Furnace Hot Surface Igniter
The 1408 is a replacement 120V silicon carbide hot surface igniter for gas furnaces. When the furnace calls for heat, the igniter glows white hot and lights the gas burners. Over time the element can crack or wear out, and a failed igniter is a common reason a gas furnace tries to start but never lights or never heats.
This igniter replaces the Robertshaw 41-408 and the Rheem 62-22868-93. It is a furnace igniter, not an oven igniter, so check the part number and the look of your old igniter before ordering.
Quick Answer
The 1408 Gas Furnace Igniter replaces a cracked, burned-out, or failed hot surface igniter on a gas furnace that tries to start but won't light. Replaces 41-408 and 62-22868-93. Classic symptom: the inducer runs, but the igniter never glows and the burners never light.
Common Problems This Part Fixes
Furnace won't light, with no heat
Igniter does not glow when the furnace calls for heat
Cracked, broken, or visibly damaged igniter element
Furnace cycles through ignition attempts and then locks out
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This igniter directly replaces the following part numbers:
1408, 41-408, 62-22868-93, 62-22868-02, 62-22868-82, 62-22441-01, 62-22868-92, B340039P01, 767A-372, 271N, IG408, 41-408, 67900, IG1408
The first three numbers are the main references for this igniter. The others appear on retailer cross-reference lists. Confirm against your furnace's parts list, or contact our support team, if your furnace calls out a different number.
Compatibility
This igniter is a replacement for the Robertshaw 41-408 and the Rheem 62-22868-93, and it is used on gas furnaces that call for either one. The Rheem number is used on Rheem, Ruud, WeatherKing, and Protech furnaces, including these series examples:
Rheem/Ruud UGDG, UGLG, UGLH, UGPH, UGTA, UGVG
Rheem/Ruud 80LJ, 80PJ, 90RJ, 90TJ
Note: The series above are a sample, not a full list. Retailers do not list the lead length or connector style for this igniter, so compare your old igniter's shape, lead, and connector to the new one, and contact our support team with your furnace model number to verify fit before ordering.
Key Features
120V silicon carbide hot surface igniter for gas furnaces
Replaces Robertshaw 41-408 and Rheem 62-22868-93
Resolves no-light and no-heat problems caused by a failed igniter
Furnace igniter, not for gas ovens
Product Specifications
Part Number
1408
OEM Part Number
62-22868-93, 41-408
Part Type
Gas Furnace Hot Surface Igniter
Condition
Aftermarket Replacement
Element Material
Silicon Carbide
Voltage
120V
Application
Gas Furnaces
Installation Notes
⚠️ Turn Off Power and Gas Before Installing Switch off power to the furnace at the breaker and the furnace switch, and shut off the gas supply, before beginning. Wear work gloves. Let the old igniter cool, disconnect its lead, remove it, and fit the new igniter in the same position. Handle the new igniter only by its ceramic base, and avoid touching the silicon element, since skin oils can cause early failure. If the furnace still does not light, check the control board and the gas valve.
Frequently Asked Questions
My furnace won't light. Is this the part I need?
A cracked or burned-out igniter is a common cause. If the igniter doesn't glow when the furnace calls for heat, or the element is visibly cracked, it is likely the problem. If the igniter glows but the burners don't light, check the gas valve and control.
Does this replace the Robertshaw 41-408 and the Rheem 62-22868-93?
Yes, it is listed as a replacement for both. Because retailers do not list lead length or connector style, compare your old igniter to this one, or contact our support team, before ordering.
Why shouldn't I touch the igniter element?
Skin oils on the silicon element can cause the igniter to fail early. Handle it by the ceramic base only.
Will this fit my furnace?
It is used on gas furnaces that call for a 41-408 or 62-22868-93 igniter, but the series list above is only a sample. Check your furnace's parts list, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO H150 Furnace Silicon Nitride Rod Ignitor
The H150 universal gas furnace igniter come with a 1.95-inch ceramic nitride heating element, a 1.25-inch ceramic insulator, a 304 stainless steel bracket, and a 15.5-inch high temperature resistant wire(20 AWG). Voltage: 120V±10%-15%, 50/60HZ. Power Rating: 150W. Cold resistance: 9-17Ω. At 120V furnace igniter H150 can reach 1200 degrees in a short time
The H150 universal furnace igniter replacement can be used in a wide range of machines and is the perfect replacement for silicon carbide ignitors in water heater boilers and gas forced-air furnaces, replacing more than 180 types of ignitors and covering nearly 90% of all applications. Such as stoves, furnace, warm air motion, gas ignition, hot surface igniter, infrared light source, pool heater, boiler, etc
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
Choice W10898291 Range Spark Module (Board)
Direct spark ignition module.
Fits specific Maytag, Kenmore, Whirlpool gas range models
Replaces Part Numbers: W10898291, W10818365, AP6034131, PS11765825.
Description: This Spark Module is a replacement part for specific Maytag, Kenmore, Whirlpool gas range models. Located underneath each sealed burner bowl, it generates the high voltage spark needed for reliable ignition of surface flames.
Key Features:
✅ Replaces: W10898291, W10818365, AP6034131, PS11765825.
✅ Fits brands: Whirlpool, Maytag, Kenmore, Amana & more
✅ Ensures lid locks properly during operation
✅ Direct-fit, plug-and-play installation
⚠️ Always disconnect power before installation. Contact us to confirm fit for your washer model.
📦 Part Number: W10898291CM💯 30-Day Money Back Guarantee
This is an aftermarket part that can be used as a replacement for the OEM part.
Genuine OEM 279311 Dryer Igniter Kit and Bracket
The Genuine OEM Whirlpool 279311 is the gas dryer igniter kit with mounting bracket. The silicon carbide igniter glows to light the gas burner and produce the heat that dries your clothes. When the igniter weakens or breaks, the dryer tumbles but doesn't heat, because the gas valve never gets the signal to light the burner.
This is the original Whirlpool part. It is listed as a replacement for both round and flat igniters, so it covers a long list of older Whirlpool part numbers for gas dryers sold as Whirlpool, Kenmore, Maytag, and KitchenAid.
Quick Answer
The Genuine OEM 279311 Igniter Kit and Bracket fixes a gas dryer that spins but doesn't heat because the igniter has burned out or is too weak to open the gas valve. It is for gas dryers only. Classic symptom: the drum turns and the dryer sounds normal, but clothes come out cold and damp, and you never see the igniter glow.
Common Problems This Part Fixes
Gas dryer runs but doesn't heat
Clothes come out damp after a full cycle
Igniter never glows, or glows but the burner never lights
Cracked, broken, or burned igniter
Burner lights unreliably or only some of the time
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This igniter kit directly replaces the following part numbers:
279311, 239233, 239300, 239302, 26000279311, 279185, 279311VP, 338899, 338900, 3389895, 340607, 3415, 343128, 41-311, 6-85211, 660991, 685211, 686590, 687399, 691039, 8113, 99912719, AH334180, DE351, DE354, DE363, K35-166, AP3094138, AWP39784, EAP334180, EA334180, PD00002344, PS334180
These numbers span several generations of Whirlpool's own part numbering for this igniter as dryer models were updated. All are the correct replacement regardless of which number appears on your dryer's parts diagram.
Compatibility
This igniter kit is for Whirlpool, Kenmore, Maytag, and KitchenAid gas dryers, including these examples:
Whirlpool LGN1000HQ0, LGN1000HQ1, 7MWG66740SG0, 7MWGD72HEDW0
Maytag 7MMGDC300YW0, 7MMGDC410AW0
Kenmore 11097291110, 10687884100, 110279119, 1103401771
Note: This igniter is for gas dryers only. The models above are a sample, not a full list. One supplier lists the kit contents as a 3-inch flat igniter, mounting bracket, 4-inch wire lead and plug. Confirm your model number and the igniter style against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM Whirlpool gas dryer igniter kit with bracket
Silicon carbide igniter that lights the gas burner
Listed to replace both round and flat igniters
Resolves no-heat problems caused by a failed igniter
Fits Whirlpool, Kenmore, Maytag, and KitchenAid gas dryers
Product Specifications
Part Number
279311
OEM Part Number
279311
Part Type
Gas Dryer Igniter Kit with Bracket
Condition
Genuine OEM
Fuel Type
Gas Dryers
Application
Whirlpool, Kenmore, Maytag & KitchenAid Dryers
Installation Notes
⚠️ Unplug Power and Shut Off the Gas Unplug the dryer and close the gas shutoff valve before beginning, and wear work gloves. Remove the panel that gives access to the burner assembly per your model's service guide, disconnect the igniter's wire connector, and remove the old igniter and bracket. The igniter is fragile, so handle it by the bracket and avoid bumping or squeezing the element. Install the new kit in the same position, reconnect the wires, then restore the gas and power and test the dryer for heat. If you smell gas at any point, stop, ventilate, and call your gas utility.
Frequently Asked Questions
My gas dryer spins but doesn't heat. Is this the part I need?
A failed igniter is a common cause. If you run the dryer and never see the igniter glow, or it glows but the burner doesn't light, test the igniter for continuity. A bad coil on the gas valve or a thermal fuse can cause the same symptom, so check those too.
Will this fit an electric dryer?
No. This igniter is for gas dryers only. Electric dryers use a heating element instead.
Why did my new igniter break?
Silicon carbide igniters are fragile. Handle the new one by the bracket, and don't press or bump the element during installation. A weak or restricted gas supply or a faulty gas valve can also make igniters fail early.
Will this fit my dryer?
It is listed for many Whirlpool-built gas dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WB13K10003 Surface Burner Spark Electrode
The XPARTCO WB13K10003 is an aftermarket replacement spark electrode for the surface burners on GE, Hotpoint, and Kenmore gas ranges. The electrode is the small ceramic-tipped component mounted at the burner head that actually creates the spark: when you turn the burner knob, the range's spark module sends a rapid series of high-voltage electrical pulses to the electrode, which arcs across a small gap to the metal burner cap. That spark ignites the gas flowing from the burner, and the clicking sound you hear while the knob is turned is literally the sound of that spark firing over and over until the burner catches.
Because the electrode's ceramic insulator is what keeps that high-voltage pulse contained to a precise spark path, even small damage matters: a hairline crack in the ceramic can let voltage leak to ground instead of arcing at the tip, carbon and grease buildup on the tip can insulate it just enough to weaken the spark, and the metal tip itself can corrode or erode after years of sparking. A failing electrode typically shows up as a burner that clicks normally but is slow to catch, catches with a small "whoof" as gas builds up before ignition, or doesn't spark at all while the other burners on the same range work fine. It directly replaces AP2020574, 244911, AH231266, EA231266, and PS231266. GE's internal part number for this electrode is WG02F05048.
Quick Answer
The XPARTCO WB13K10003 Surface Burner Spark Electrode fixes GE, Hotpoint, and Kenmore gas ranges where a specific burner clicks but won't light, sparks weakly or intermittently, or ignites with a delayed "whoof" instead of catching right away. Ceramic-tipped spark electrode for the surface burner. Replaces AP2020574, 244911, AH231266, EA231266, PS231266. If a burner doesn't click at all, the problem is more likely the spark module or igniter switch — not this electrode.
Common Problems This Part Fixes
A specific surface burner clicks but won't ignite, while other burners work fine
Burner sparks weakly, intermittently, or only from certain knob positions
Delayed ignition — a noticeable pause with gas smell before the burner catches with a "whoof"
Clicking sound that continues well after the burner has already lit
Visible carbon buildup, grease, or discoloration on the electrode tip
Cracked, chipped, or damaged ceramic insulator visible at the base of the electrode
Electrode tip that looks corroded, pitted, or eroded compared to a new one
No spark at all from one specific burner position
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This surface burner spark electrode directly replaces the following OEM and cross-reference part numbers:
WB13K10003, WG02F05048, AP2020574, 244911, AH231266, AGE261531, PD00035924, EA231266, PS231266
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This spark electrode is compatible with select gas surface burners on ranges from the following brands:
GE gas ranges — EGR2000, EGR3000, and EGR3001 series
GE gas ranges — J2B900 and JGB910 series
GE gas ranges — JGBP27 series
Hotpoint gas ranges (select GE-built models)
Kenmore gas ranges (select GE-built models)
Westinghouse, Monogram, Café, Moffat, and Profile gas ranges (select GE-built models)
Verified model numbers include: EGR2000EC0BB, EGR2000EC0CC, EGR2000EC0WW, EGR2000EC1BB, EGR2000EC1CC, EGR2000EC1WW, EGR3000ED0BB, EGR3000ED0CC, EGR3000ED0WW, EGR3000ED1BB, EGR3000ED2BB, EGR3000ED3BB, EGR3000EH1BB, EGR3001ED1SS, EGR3001ED2SS, EGR3001ED3SS, EGR3001EF1SS, EGR3001EH1SS, J2B900BEF1BB, J2B900CEF1CC, J2B900SEF1SS, J2B900SEF2SS, J2B900WEF1WW, JGB910BEC1BB through JGB910BEC4BB, JGB910CEC1CC through JGB910CEC4CC, JGB910SEC1SS through JGB910SEC3SS, JGB910WEC1WW through JGB910WEC4WW, and the JGBP27BEA1AD through JGBP27BEA5AD range.
Note: GE uses several visually similar spark electrodes across its gas range lineup that differ in overall length and mounting angle — for example, a related electrode sold under WB13K10014 is used on other burner positions and model platforms. Some customers have reported this electrode arriving slightly longer than the original but still fitting with room to spare; if your range has very tight clearance underneath, verify your exact model number and burner position before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement ceramic-tipped spark electrode for gas surface burner ignition
Directs high-voltage pulses from the spark module into a precise spark path at the burner cap
Resolves "clicks but won't light," "weak or intermittent spark," and "delayed ignition" symptoms caused by a worn or damaged electrode
Ceramic insulator construction resists heat and contains the spark path
Direct drop-in replacement — mounts to the same burner head bracket and wire connector
Replaces AP2020574, 244911, AH231266, EA231266, and PS231266
Compatible with GE, Hotpoint, Kenmore, Westinghouse, Monogram, Café, Moffat, and Profile gas ranges
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
WB13K10003
OEM Part Number
WB13K10003 (WG02F05048)
Part Type
Gas Range Surface Burner Spark Electrode
Condition
Aftermarket Replacement
Application
Gas Range Surface Burner Ignition
Tip Material
Ceramic-insulated electrode tip
Function
Directs spark module pulses to ignite burner gas
Mounting
Burner head bracket with wire lead connector
Quantity
1 electrode
Compatible Brands
GE, Hotpoint, Kenmore, Westinghouse, Monogram, Café, Moffat, Profile
Installation Notes
⚠️ Danger — Gas Appliance Turn off the gas supply to the range at the shutoff valve and unplug the range (or shut off its circuit breaker) before beginning any work near the burners or gas line. After reassembly, check every disturbed connection for leaks using a soapy water solution — bubbling indicates a leak. If you ever smell gas at any point during this repair, do not attempt to light the range or operate any switches; leave the area immediately and contact your gas utility or a qualified technician.
⚠️ Handle The Ceramic Insulator Carefully Wear work gloves. Remove the burner grate and burner cap from the affected position to access the electrode underneath. Photograph the electrode's mounting position and wire connection before removing anything. Most electrodes are held in place with a single screw and connect to the spark module via a simple push-on wire terminal — disconnect the wire first, then remove the mounting screw and lift the old electrode free. The ceramic insulator is more fragile than it looks; avoid gripping or prying on it directly, and handle it by the mounting bracket instead. Install the new WB13K10003 in the same position and orientation, making sure the tip sits at the correct gap and angle relative to the burner cap — too far and the spark won't reach the gas port, too close and it can short against the burner base. Reconnect the wire terminal, secure the mounting screw, and reinstall the burner cap and grate. Restore the gas supply and power, then test ignition at that burner position and check for leaks at any connection you touched before considering the job complete. Tools needed: Phillips or flat-blade screwdriver (model-dependent), soapy water for leak testing, work gloves.
Frequently Asked Questions
My burner doesn't click at all when I turn the knob. Is this the right part?
Probably not, at least not by itself. If a burner produces no clicking sound whatsoever, the issue is more likely the spark module (the component that generates the high-voltage pulses) or the igniter switch behind the knob, rather than the electrode itself — an electrode can't spark if it's never receiving a pulse in the first place. This electrode is the right fix when you hear clicking at that burner position but it fails to ignite, sparks weakly, or ignites with a delay.
The burner lights but with a small "whoof" and a delay. Is that dangerous?
A delayed ignition means gas is flowing and accumulating for a moment before the spark finally catches it, which is exactly the kind of small buildup that produces that "whoof" sound and flare. It's not something to ignore — a weak or intermittent electrode is the common cause, and replacing it restores immediate, reliable ignition. If delayed ignition continues after replacing the electrode, have the burner and gas supply checked by a qualified technician rather than continuing to use it.
Can I clean the electrode instead of replacing it?
Light cleaning can sometimes help if the tip is coated in grease or food residue — gently wiping the ceramic and metal tip with a dry cloth or a small amount of rubbing alcohol may restore a weak spark caused purely by surface buildup. But if you see a cracked or chipped ceramic insulator, a visibly eroded or pitted tip, or the spark still fails after cleaning, the electrode itself has degraded and cleaning won't fix that — replacement is the correct next step.
One burner sparks weakly but the others are fine. Does that rule out the spark module?
Yes, generally. The spark module typically drives all the surface burner electrodes from the same unit, so if only one position is affected while the rest spark normally, the shared module is very unlikely to be the cause — the problem is isolated to that one electrode (or its individual wire connection). If every burner is weak or unreliable at the same time, that points toward the spark module instead.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the ceramic insulator design, tip geometry, mounting bracket, and wire connector of the original WB13K10003 electrode used in compatible GE, Hotpoint, and Kenmore gas ranges.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WE4X750 Gas Dryer Igniter
The XPARTCO WE4X750 is an aftermarket replacement flat igniter for select GE, Hotpoint, Whirlpool, Maytag, Frigidaire and other gas dryers, replacing GE part WE4X750 and cross-referencing 5303937186 and 4391996. The igniter sits in the burner assembly. It heats up when electrical current passes through it and lights the gas so the dryer can heat. When it wears out or stops glowing, the dryer may run but not heat.
Check your model number before ordering, as gas dryers use several different igniters.
Quick Answer
The XPARTCO WE4X750 Gas Dryer Igniter replaces a worn or non-glowing igniter on a compatible gas dryer from GE, Hotpoint, Whirlpool, Maytag, Frigidaire and other brands. Replaces WE4X750, WE04X0750, 5303937186 and 4391996. Classic symptom: the dryer runs but does not heat, and the igniter doesn't glow. Other parts can cause the same symptom.
Common Problems This Part Fixes
Gas dryer not heating
Igniter not glowing
Worn igniter that no longer lights the burner
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer igniter directly replaces the following part numbers:
WE4X750, WE04X0750, 276846, AGE25807, AH268196, AP2042796, EA268196, PD00001123, PS268196, 5303937186, 08001685, 08010845, 08015456, 1036069, 3281151, 5303281151, 8001685, F000134211, F134211-000, F134211000, F139743-000, F139743000, G139743-000, AFR17339, AH900236, AP3674313, EA900236, PD00000539, PS900236, Q000622141, Q622141, WQ622141, 4391996, 14211282, 3-4970, 3018, 304970, 41-311, 41-590, 4391996VP, AH373025, AP3109449, AWP39344, DE351, DE363, EA373025, K35-166, K35-455, PD00002514, PS373025
Gas dryers use several different igniters, and they are not interchangeable by number alone. If your old igniter shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This igniter is listed for select GE, Hotpoint, Whirlpool, Maytag, Frigidaire and other gas dryers. Example GE and Hotpoint models that use WE4X750:
GE DBL333GA0CC, DCL333GA0AA, DVL223GA0WW, DBL333GY0WW
GE DCB330GB0KC, DCD330GY1AC, DH43GW0WW
Hotpoint NVL333GY0AA
Note: The models above are a small sample of the roughly 36 that retailers list for WE4X750, not a full list, and the example models are GE and Hotpoint. For other brands, confirm fit by your igniter's part number (such as 4391996 or 5303937186) and your model. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Aftermarket replacement for the GE WE4X750 flat gas dryer igniter
Lights the gas burner so the dryer can heat
Installs in the dryer burner assembly
Replaces the earlier GE number WE04X0750 and cross-references 5303937186 and 4391996
Product Specifications
Part Number
XPWE4X750
OEM Part Number
WE4X750, 5303937186, 4391996
Part Type
Gas Dryer Igniter (Flat)
Condition
Aftermarket Replacement
Quantity
1 Igniter
Application
Select GE, Hotpoint, Whirlpool, Maytag, Frigidaire & Other Gas Dryers
Installation Notes
⚠️ Disconnect Power And Shut Off The Gas Before Installing Unplug the dryer and shut off the gas supply before you begin, and wear work gloves. Remove the panel to reach the burner assembly, note how the igniter and its wiring connect, and remove the old igniter. Handle the new igniter carefully and install it in the same position. Reconnect the wiring, restore power and gas, and test the dryer. If you smell gas at any point, stop and contact a qualified technician.
Frequently Asked Questions
My gas dryer runs but doesn't heat. Is this the part I need?
It can be, if the igniter has worn out and no longer glows. Other parts, such as the gas valve coils or thermal fuse, can cause the same symptom, so confirm the igniter is the problem before replacing it.
Is this an OEM or aftermarket part?
This is an aftermarket replacement from XPARTCO, made to replace GE part WE4X750. If you specifically need a genuine GE part, contact our support team.
Can I use a different gas dryer igniter?
Not by number alone. Gas dryers use several different igniters. Match the part number and your model number, or contact our support team and we'll check for you.
Will this fit my dryer?
It is listed for select gas dryers from GE, Hotpoint, Whirlpool, Maytag, Frigidaire and other brands, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WE4X444 Gas Dryer Genuine Igniter
Replaces Part Numbers:WE4X444, WE04X0444, WE11X0096, WE4X444R, AH268028, EA268028, OEM8170538, AP2042634, PS268028, WP4392003, 4392003, 14200046, 3-3376, 303376, 41-982, 4392003BULK, 55438, 55438-6, 63-5010, 63-5877, DE350, K35-106, K35-368, R0611505, OEM24037398, AP6009349, PS11742507.
Description: This Gas Dryer Igniter is a replacement part for specific GE, Hotpoint, Whirlpool dryer models. This essential component is responsible for igniting the gas in the burner, allowing the dryer to heat up and effectively dry your clothes. The igniter heats up to a high temperature to ignite the gas, starting the heating process necessary for drying.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
Genuine OEM 316031501 Range / Oven Safety Gas Valve
The Genuine OEM Frigidaire 316031501 is the oven safety gas valve for select Frigidaire, Kenmore, Crosley and Electrolux gas ranges. It controls the flow of gas to the bake and broil burners in the oven. When the valve fails, the igniter may glow but the burner won't light.
This is the original Frigidaire part, not an aftermarket equivalent. It is sold individually. This is a gas component, so installation should be done carefully, with the gas supply shut off and the connections leak tested afterward. Check your model number before ordering.
Quick Answer
The Genuine OEM 316031501 Range / Oven Safety Gas Valve replaces a failed oven gas valve on a compatible Frigidaire, Kenmore, Crosley or Electrolux gas range. Classic symptom: the oven igniter glows, but the bake or broil burner will not light.
Common Problems This Part Fixes
Igniter glows, but the bake or broil burner will not light
Oven won't heat even though the igniter is working
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Part Number
This oven safety gas valve is Frigidaire part number:
316031501 replaces 2689735, AFR16379, AP5648869, EAP5136194, PD00027443, PS5136194
If your old valve shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This oven safety gas valve is listed for select Frigidaire, Kenmore, Crosley and Electrolux gas ranges, including these examples:
Frigidaire FFGF3054TWA, FGGF3060SFA, 30462042B, 70462040A
Crosley CRG3480LWF, CRG3480LSJ
Kenmore 790.32363410, 790.32602310
Note: The models above are a sample, not a full list. Frigidaire uses other oven gas valves on other ranges under different part numbers. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM Frigidaire part, not an aftermarket equivalent
Controls gas flow to the oven bake and broil burners
Safety gas valve for select gas ranges
Sold individually
Product Specifications
Part Number
316031501
OEM Part Number
316031501
Part Type
Range / Oven Safety Gas Valve
Condition
Genuine OEM
Manufacturer
Frigidaire
Quantity
1 Valve
Application
Select Gas Ranges
Installation Notes
⚠️ Shut Off The Gas And Leak Test Unplug the range, shut off the gas supply and wear work gloves before you start. You will need a wrench and leak testing solution. After installing the new valve, turn the gas back on and test every gas connection with leak testing solution before using the oven. If you are not experienced with gas appliance repairs, have a qualified technician install it. Contact our support team if you have questions about gas type for your range.
Frequently Asked Questions
My igniter glows but the oven won't light. Is the valve the fix?
Possibly. A failed gas valve is a common cause when the igniter glows and the burner doesn't light. A weak igniter can cause the same symptom, so check the igniter first.
Is this an OEM or aftermarket part?
This is a genuine OEM part from Frigidaire, not an aftermarket equivalent.
Is this for the oven or the cooktop burners?
It controls gas flow to the oven's bake and broil burners. It is not a cooktop burner valve.
Will this fit my range?
It is listed for many Frigidaire, Kenmore, Crosley and Electrolux gas ranges, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
