Search results for "refrigerator switch"

WPW10190981 Genuine OEM Whirlpool Refrigerator Ice Maker The WPW10190981 is a genuine Whirlpool OEM ice maker assembly for Whirlpool, Maytag, Kenmore, Jenn-Air, KitchenAid, and Amana French door refrigerators. This assembly receives water from the refrigerator's water inlet, holds it in the ice mold until it freezes, then uses a heating element to loosen the finished ice from the mold and automatically eject it — a rotating arm pushes the ice into the storage bin, and the cycle repeats until the bin is full. This is a modular-style assembly, and it does not include a new cover, ice level arm, or wire harness — these three components must be reused from your existing ice maker. If the coating on your current ice maker's mold is flaking off, or if internal components are no longer functioning correctly, replacing the assembly resolves both problems together. It directly replaces W10122533 and W10190981. Quick Answer The WPW10190981 Genuine OEM Whirlpool Refrigerator Ice Maker fixes Whirlpool, Maytag, Kenmore, Jenn-Air, KitchenAid, and Amana French door refrigerators that have stopped making ice, are producing less ice than usual, or have a mold with flaking coating. Replaces W10122533, W10190981. This assembly does not include the cover, ice level arm, or wire harness — you must transfer these three components from your old ice maker to the new one during installation. Common Problems This Part Fixes Ice maker has stopped producing ice entirely Ice maker producing less ice than it used to Ice mold coating visibly flaking or deteriorating Ice maker cycling but not ejecting ice into the bin Internal ice maker components no longer functioning correctly Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator ice maker directly replaces the following OEM and cross-reference part numbers: WPW10190981, W10190981, 1471732, W10122533, AP6016630, AWP49581, OEM18049899, PD00007257, PS11749922 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This ice maker is compatible with select Whirlpool French door refrigerators, and also fits select Maytag, Kenmore, Jenn-Air, KitchenAid, and Amana refrigerators built on the Whirlpool platform, including model numbers such as: MFI2269VEM, MFI2269VEW, MFI2269VEB, GI0FSAXVY, KFIS20XVMS 7GI5FSAXVY1, 7GI5FSAXVY2, 7GI5FSAXVY3 7MI2569VEM1, 7MI2569VEM3 (Maytag) GI5FVAXVQ00, GI0FSAXVA01, GI0FSAXVB01, GI0FSAXVB02, GI0FSAXVQ01, GI0FSAXVY01, GI0FSAXVY03 GI5FSAXVA00, GI5FSAXVA01, GI5FSAXVB00, GI5FSAXVB01, GI5FSAXVB02, GI5FSAXVQ00, GI5FSAXVQ01 Note: Always verify your full model number before ordering, since Whirlpool uses several different ice maker designs across its French door refrigerator lineup. Contact our support team with your model number if you're unsure. Key Features Genuine Whirlpool OEM part — factory-specified mold design and cycling mechanism Automatically fills, freezes, and ejects ice into the storage bin Resolves "not making ice," "reduced ice production," and "flaking mold coating" symptoms Modular-style assembly for straightforward replacement Direct drop-in replacement for the ice maker body — reuses your existing cover, ice level arm, and wire harness Replaces W10122533 and W10190981 Compatible with Whirlpool, Maytag, Kenmore, Jenn-Air, KitchenAid, and Amana French door refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number WPW10190981 Part Type French Door Refrigerator Ice Maker Assembly Condition Genuine OEM Brand Whirlpool Function Fills, freezes, and ejects ice via heating element and rotating arm Includes Cover, Ice Level Arm, Wire Harness No — reuse from existing ice maker Repair Difficulty Moderate — basic hand tools, some disassembly required Quantity 1 ice maker assembly Compatible Brands Whirlpool, Maytag, Kenmore, Jenn-Air, KitchenAid, Amana Installation Notes ⚠️ Unplug Refrigerator Before Starting — This Assembly Does Not Include The Cover, Ice Level Arm, Or Wire Harness Disconnect power to the refrigerator, or shut off the house circuit breaker for the appliance, before beginning. Wear work gloves. Move perishable food to a cooler for the duration of the repair. Open the freezer door and remove the ice bucket or drawer to access the ice maker. Photograph the wiring harness connection and the position of the cover and ice level arm before disconnecting anything. Remove the mounting screws securing the old ice maker in place, then disconnect the wire harness connector. Before setting the old ice maker aside, remove its cover, ice level arm, and wire harness — none of these three components are included with this replacement assembly, and you'll need to transfer all of them onto the new WPW10190981. Attach the cover, ice level arm, and wire harness from your old ice maker onto the new assembly, making sure each is seated and connected correctly. Mount the new assembly in the same position, reconnect the wire harness connector, and secure the mounting screws. Reinstall the ice bucket or drawer. Restore power and allow several hours for the first cycle to complete, confirming ice is being produced and ejected normally. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions Does this ice maker come complete and ready to install? Not entirely — this assembly does not include a new cover, ice level arm, or wire harness. You'll need to remove these three components from your existing ice maker and transfer them onto this new assembly during installation, since only the ice maker body itself is included. My ice mold's coating is flaking. Should I replace the whole assembly? Yes. The mold coating isn't a separately serviceable part — if it's flaking off, replacing the complete ice maker assembly is the correct fix, since a damaged coating can affect ice quality and won't improve on its own. Is this a difficult repair? It's considered a moderate repair requiring basic hand tools, some disassembly of the refrigerator, and novice repair experience. The extra step of transferring the cover, ice level arm, and wire harness from your old unit adds a bit more care to the process compared to a fully complete replacement assembly, but it's manageable for a confident DIYer. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original mold design, heating element, and cycling mechanism of the ice maker originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO DC96-01703H Washer Water Pressure Switch - Compatible with Samsung Washers Product Description Ensure your Samsung washer operates flawlessly with the replacement DC96-01703H Washer Water Pressure Switch. This replacement part is designed for select Samsung washing machines, providing precise water level control to prevent overfilling, underfilling, or water leakage. It resolves issues like error codes, inconsistent water levels, or failure to start wash cycles, delivering reliable performance for your appliance. Note: Disconnect power and water supply before installation. Verify model compatibility for proper fit. Replaces part numbers: DC96-01703H, PD00030634, EAP8764044, AP5799898, 3997570, PS8764044. Compatibility: Compatible with models including but not limited to: Samsung: WA48J7700AW/A2, WA48H7400AW/A2, WA50F9A7DSP/A2, WA52M7750AV/A4, WA56H9000AP/A2 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand Compatibility: Fits select Samsung washing machines. 🔥 Specifications: Water pressure switch with electrical connectors and 28" hose attachment. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 10–15 minutes. 🛡️ Effective Fixes: Resolves water level issues, error codes, and improper filling. Product Specification Part Number: XPDC96-01703H Component Type: Washer water pressure switch Mounting: Secures to washer control panel with screws or clips Operating Conditions: Suitable for washer environments Installation Notes: Safety First: Disconnect the washer from power and water sources before installation. Follow the owner’s manual for guidance. Shop for high-quality replacement appliance parts with a 30-day return policy. Fix your washer today! Add to cart now for a reliable solution!

Read more less

ADQ72910908 Refrigerator Water Filter Description: This water filter is designed to remove impurities from the water and ice dispensed by your refrigerator, providing clean and fresh-tasting water. It effectively reduces contaminants such as chlorine, lead, mercury, and other particulates, ensuring safe drinking water for you and your family.  You should replace this water filter if it becomes clogged or reaches the end of its usable life, typically every six months. Causes of a bad water filter can include normal usage leading to clogging, the accumulation of sediments and impurities over time, or damage to the filter casing. Failing to replace the filter regularly can also compromise its effectiveness. Cross Reference Number: ADQ72910908, AP6889635, PS12724753, LT500P/PC/PCS

Read more less

4890JL1002M Refrigerator Shelf Glass   Compatibility and Part Cross-References This component is highly cross-compatible and is designed to fit a wide selection of bottom-freezer and standard refrigerators manufactured by LG, including specific models across the LG LFC and LRB series, as well as select Kenmore models (such as the Kenmore 795 series). Replaces Part Number 4890JL1002M, 1550723, AH3524074, EA3524074, AP5215948, PS3524074. Part number 4890JL1002M is a genuine, original equipment manufacturer (OEM) refrigerator crisper cover glass shelf made primarily by LG Electronics. It functions as the clear glass insert that sits directly inside the plastic crisper drawer frame, acting as a sturdy, tempered-glass roof for your fruit and vegetable bins while serving as a functional storage shelf above them.

Read more less

5040JA2004A Genuine OEM LG Refrigerator Motor Damper Grommet (Rear) The 5040JA2004A is a genuine LG OEM rubber motor damper grommet for LG and select Kenmore refrigerators. This small rubber component mounts and isolates a fan motor from the surrounding bracket, cushioning it against vibration as the motor runs. This is the rear-position grommet; LG refrigerators typically use more than one grommet to support a fan motor from multiple points. Made of rubber, this grommet naturally degrades over years of exposure to cold temperatures and constant vibration, eventually cracking, hardening, or losing its cushioning shape. Once it fails, the motor it supports is no longer properly isolated, and the metal motor bracket can end up in direct contact with the surrounding housing. A worn or failed grommet typically shows up as new or worsening rattling, buzzing, or vibration noise coming from the back of the refrigerator, especially noticeable when the fan motor is running. It directly replaces 5040JA2004B, 1268010, AP4635690, AH3526229, EA3526229, PS3526229, EAP3526229, and PD00027884. Quick Answer The 5040JA2004A Genuine OEM LG Refrigerator Motor Damper Grommet (Rear) fixes LG and select Kenmore refrigerators with new or worsening rattling, buzzing, or vibration noise from the back of the unit, especially when the fan motor is running. Rubber, rear-position grommet. Replaces 5040JA2004B, 1268010, AP4635690, AH3526229, EA3526229, PS3526229, EAP3526229, PD00027884. This grommet is used with a fan motor at the rear of the refrigerator; sources vary on whether that's the evaporator or condenser fan depending on the specific model, so confirm your model number before ordering. Common Problems This Part Fixes Rattling or buzzing noise from the back of the refrigerator Vibration noise that's especially noticeable when the fan motor is running Noise that has gradually worsened over time Visibly cracked, hardened, or flattened rubber grommet Motor bracket that feels loose or vibrates excessively against its housing Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This motor damper grommet directly replaces the following OEM and cross-reference part numbers: 5040JA2004A, 1268010, AP4635690, AH3526229, EA3526229, PS3526229, EAP3526229, PD00027884 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This motor damper grommet is compatible with select LG refrigerators, and also fits select Kenmore refrigerators built on the LG platform, including model numbers such as LSXS26386S00, LTCS20030S/00, LTC24380SB00, LRSCS21935SW, LFC24770ST/02, LSXS26326W/01, and Kenmore 795.79043311, 795.51089011, 795.51832412, 795.79412810, and 795.78032211. Note: This is the rear-position grommet. LG also lists a related grommet, part number 5040JA2009B, used as a support damper for fan motors on other models — the two are not necessarily interchangeable, so confirm your exact part number and position before ordering. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine LG OEM part — factory-specified rubber compound and fit Isolates the fan motor from its bracket, cushioning it against vibration Resolves "rattling," "buzzing," and "vibration noise" symptoms caused by a worn or failed grommet Rear-position grommet Durable rubber construction designed for the refrigerator's cold operating environment Direct drop-in replacement — no tools required on most models Replaces 5040JA2004B, 1268010, AP4635690, AH3526229, EA3526229, PS3526229, EAP3526229, and PD00027884 Compatible with LG and select Kenmore refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number 5040JA2004A Part Type Fan Motor Damper Grommet — Rear Condition Genuine OEM Brand LG Material Rubber Function Isolates and cushions a fan motor from vibration at its bracket Position Rear Related Part 5040JA2009B (support damper, different position/models — verify before substituting) Repair Difficulty Very Easy — typically no tools required Quantity 1 damper grommet Compatible Brands LG, Kenmore Installation Notes ⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler if access requires opening the freezer compartment. Wear work gloves. Access depends on your model — this grommet supports a fan motor that may be located behind the freezer's rear interior panel or in the compressor/machine compartment at the back or bottom of the unit, so check your model's service diagram for the exact location. Remove any panel screws needed to reach the motor bracket. Photograph the grommet's position and how it seats against the bracket before removing it. Gently remove the old, worn grommet from around the motor mounting post — it typically pulls or presses off without tools. Press the new 5040JA2004A grommet into the same position, seating it fully so it cushions the motor bracket evenly. Reassemble any panels removed for access, restore power, and run the refrigerator for a while to confirm the rattling or vibration noise has resolved. Tools needed: Phillips screwdriver (for panel access), work gloves. Frequently Asked Questions My refrigerator has developed a rattling noise from the back. Is this the grommet? Yes, this is a common cause of exactly that symptom. Once the rubber grommet cracks, hardens, or loses its cushioning shape, the fan motor's mounting bracket is no longer properly isolated and can vibrate directly against the surrounding housing, producing a rattling or buzzing noise — especially noticeable whenever the fan motor is actively running. Is this for the evaporator fan motor or the condenser fan motor? Sources describe this grommet's application somewhat differently depending on the specific refrigerator model — some reference it as supporting the evaporator fan motor, others the condenser fan motor. In practice, this reflects that LG uses the same grommet design for fan motor mounting in more than one location depending on the model. Confirm your full model number against the compatibility list, or check your appliance's parts diagram, to be certain which motor this grommet supports on your specific unit. Do I need any tools to replace this? The grommet itself is tool-free — it simply presses into place around the motor mounting post. You will likely need a screwdriver to remove whatever panel is covering the area where the motor and grommet are located, but the grommet swap itself requires no tools. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original rubber compound and mounting fit of the motor damper grommet originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 5304506469 Refrigerator Door Handle (White) Replaces Part Numbers: 5304506469, 5304486359, 5304497105, 5304504507, 242059501, 242059504, 4456321, 5304510038, 5304510040, AP6036330, PS11770473. Description: This Door Handle Set is a replacement part designed to offer a perfect fit and finish for select Frigidaire refrigerator models. This set includes handles that are crucial for the easy opening and closing of your refrigerator or freezer doors. Common  causes of a bad door handle set can include regular wear and tear, which may lead to loosening or breakage, or accidental damage from impacts. Over time, handles may also discolor or degrade, affecting the overall appearance and functionality of your appliance.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

4TM-C12 Refrigerator / Freezer Compressor Overload 1/2 HP Refrigerator / Freezer Thermal Overload Protector 1/2 HP (375W) - 110V 4TM-C Replaces Part Numbers: 6750C-0004R, AP4651578, PS3529535, 6750C-0005P, AH3529540, EA3529540, AP4439459, PS3529540.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO 4681JB1027C Refrigerator Evaporator Fan Motor Replaces Part Numbers: 4681JB1027C, EAU60694512, 4681JB1027V, 4681JK1004E, AH3523323, EA3523323, EAU52096201, EAU60694529, SM1027C, AP4507961, PS3523323.  Replaces LG #4681JB1027C. 13VDC, 3.1 W, .24A. Has quick disconnect. Description: This Fan Motor is a replacement part for specific LG refrigerator models. It is essential for circulating air throughout the refrigerator and freezer compartments, ensuring that the temperature is evenly distributed and maintained at the set levels. This motor powers the fan that helps to cool the evaporator coils and dissipate heat, which is vital for the appliance's cooling efficiency. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO W10810403 Washer Lid Switch Assembly The XPARTCO W10810403 is an aftermarket replacement lid lock assembly for Whirlpool Cabrio and Maytag Bravos XL top-load washers. Positioned on the underside of the washer lid, this assembly detects whether the lid is open or closed and locks it shut during the wash cycle, preventing the washer from spinning or agitating — and preventing the lid from being opened — while the cycle is running. This is a safety mechanism as much as a functional one, keeping users from contacting moving parts or being splashed by water or detergent mid-cycle. This assembly includes the lid lock mechanism and its wiring harness, and ships with a white bezel. Many of these lid locks also contain an internal fuse as part of the switch circuit — if that fuse blows, the symptom isn't limited to lid-related errors; it can prevent the entire control board from powering up at all, since the switch sits in the same circuit path. A failing lid lock typically shows up as the lid not closing or locking properly, the washer failing to start, the cycle stopping mid-way, or in more severe cases, a completely unresponsive control panel with no lights at all. It directly replaces AP5984435, PS11722981, W10648012, W10787878, W10697793, W10787880, AP5999414, and PS11731620. Quick Answer The XPARTCO W10810403 Washer Lid Switch Assembly fixes Whirlpool Cabrio, Maytag Bravos XL, and select Kenmore 600/700 Series top-load washers where the lid won't lock, the washer won't start, the cycle stops mid-way, or the control panel is completely unresponsive with no lights. White bezel. Replaces AP5984435, PS11722981, W10648012, W10787878, W10697793, W10787880, AP5999414, PS11731620. If your original lock has a grey bezel, you need part number W10861642 instead — same mechanism, different bezel color, so match the color of your existing lock before ordering. Common Problems This Part Fixes Lid won't lock or lock reliably during the cycle Lid won't open after a cycle finishes Washer won't start Washer won't agitate or spin because the lid isn't sensed as locked Cycle stops partway through Washer pumps but won't spin Control panel completely unresponsive with no lights, potentially from an internal fuse in the switch circuit Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer lid switch assembly directly replaces the following OEM and cross-reference part numbers: W10810403, 4283179, W10632841, W10637463, W10648012, W10787836, W10787878, AP5984435, AWP41491, EAP11722981, PD00028176, PS11722981 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This lid switch assembly is compatible with select Whirlpool Cabrio and Maytag Bravos XL top-load washers, and also fits select Roper, Admiral, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, KitchenAid, Caloric, and Ikea washers built on the same platform, including model numbers such as MVWB855DW1, MVWB865GW1, MVWB835DW3, and MVWB765FW4. Note — bezel color and lid lock platform both matter: This assembly has a white bezel. If your original lock has a grey bezel, order W10861642 instead — same lock mechanism, different bezel color. Separately, Whirlpool has used several distinct lid lock designs across its Cabrio-era washer lineup, including a different 3-wire electronic lock (our W11670519 listing) used on other Cabrio/MVW models. These are not the same part despite both serving Cabrio-platform washers. Always verify your full model number and match your original lock's exact part number before ordering. Contact our support team with your model number if you're unsure. Key Features Aftermarket replacement lid lock assembly — includes the lock mechanism and wiring harness Resolves "lid won't lock," "washer won't start," "cycle stops mid-way," and "unresponsive control panel" symptoms White bezel finish Safety mechanism that prevents lid opening and drum movement from occurring at the same time Direct drop-in replacement — mounts to the original position on the underside of the lid Replaces W10810403, 4283179, W10632841, W10637463, W10648012, W10787836, W10787878, AP5984435, AWP41491, EAP11722981, PD00028176, PS11722981 Compatible with Whirlpool, Maytag, Roper, Admiral, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, KitchenAid, Caloric, and Ikea top-load washers Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number XPW10810403 OEM Part Number W10810403 Part Type Washer Lid Lock/Switch Assembly Condition Aftermarket Replacement Application Whirlpool Cabrio / Maytag Bravos XL Top-Load Washers Bezel Color White (grey bezel = W10861642) Included Components Lid lock mechanism + wiring harness Location Underside of the washer lid Repair Difficulty Easy — basic hand tools Quantity 1 lid switch assembly Compatible Brands Whirlpool, Maytag, Roper, Admiral, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, KitchenAid, Caloric, Ikea Installation Notes ⚠️ Unplug Washer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Open the washer lid and locate the lid lock assembly mounted on its underside, typically secured with a couple of screws. Photograph the wiring harness connection before disconnecting anything. Remove the mounting screws, disconnect the wiring harness connector from the old assembly, and pull it free. Install the new W10810403 in the same position, reconnect the wiring harness connector fully, and secure the mounting screws. Restore power and run a test cycle to confirm the lid locks securely, the washer starts and completes a full cycle, and the lid unlocks normally once finished. Tools needed: multi-screwdriver, work gloves. Frequently Asked Questions My control panel has no lights at all. Could the lid lock really cause that? Yes, and this is a less obvious but documented cause. Some of these lid lock assemblies include an internal fuse as part of the switch circuit. If that fuse blows, it can prevent the control board from powering up entirely, producing a completely dark, unresponsive panel rather than a symptom that's obviously tied to the lid. If your washer has no lights and no response at all, this lock assembly is worth checking alongside the more obvious suspects. My old lock has a grey bezel. Can I still use this part? This specific listing has a white bezel. If your original lock is grey, order part number W10861642 instead — it's the same lock mechanism, just finished with a grey bezel to match certain washer trim colors. Using the wrong bezel color won't affect function, but it will look mismatched against your washer's lid. Is this the same lock used on all Cabrio washers? No — Whirlpool has used more than one lid lock design across its Cabrio-era lineup. This W10810403 is a distinct assembly from other Cabrio/MVW-platform locks, such as our W11670519 listing, which uses a different 3-wire electronic locking design. Always match your exact original part number rather than assuming any "Cabrio lock" will fit, since the mounting and electrical interface can differ between designs. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the locking mechanism, wiring harness, and bezel design of the original W10810403 lid lock assembly used in compatible Whirlpool Cabrio, Maytag Bravos XL, and related top-load washers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

241993101 Refrigerator Genuine OEM Front Crisper Cover Support Replaces Part Numbers: 241993101, 1513082, 240423701, 7241993101, AH2358880, EA2358880, AP4427109, PS2358880. Description: This Front Crisper Cover Support is a Genuine OEM replacement part for select Frigidaire models. Crafted with high-quality materials, this front crisper cover support is designed to provide long-lasting support for your crisper drawer. It's easy to install and comes with everything you need to get your refrigerator back in working order. It may need replacing if the shelf or the drawer is sagging or misaligned.    

Read more less

XPARTCO WR60X10185 Refrigerator Evaporator Fan Motor The XPARTCO WR60X10185 is an aftermarket replacement evaporator fan motor located in the freezer compartment, for GE, Hotpoint, and select Kenmore, Haier, Monogram, and Café refrigerators. This motor pulls air across the evaporator coils to strip heat from it, then circulates that cold air through the freezer and, via ducting, to the fresh food compartment. This particular motor does not include a thermistor — it ships as a fan motor with a 4-wire harness on a 6-pin connector, with two of those six pin slots left empty. If your refrigerator's original connector has a white thermistor wire in it, or a separate connector for a freezer light, this is not the correct motor for your unit. Rated 9.75V DC, 3.25W. A fan motor generally has a long service life, but it can burn out quickly if debris or ice buildup obstructs the blade and forces the motor to work against resistance it wasn't designed for. Common symptoms of a failing motor include unusual noise from the freezer, a fresh food compartment that's warmer than it should be while the freezer stays reasonably cold, frost or ice accumulating around the fan or coil, and a refrigerator that runs constantly trying to compensate for lost circulation. It directly replaces AP3875639, 1170107, 197D2039P007, 197D2039P008, PS1019114, EAP1019114, WR23X10346, WR23X10350, WR23X10353, WR23X10355, WR23X10364, WR23X10404, WR23X10405, WR23X10406, WR60X10043, WR60X10059, WR60X10068, WR60X10083, WR60X10084, WR60X10099, WR60X10149, WR60X10152, WR60X10154, and WR60X10157. As an aftermarket replacement, the WR60X10185 is built to OEM-equivalent quality standards. Quick Answer The XPARTCO WR60X10185 Refrigerator Evaporator Fan Motor fixes GE, Hotpoint, and select Kenmore refrigerators where the fresh food section runs warm while the freezer stays cold, there's unusual noise from the freezer, or frost is building up around the coil. 9.75V DC, 3.25W, 4-wire harness on a 6-pin connector (2 pins empty). Does NOT include a thermistor. Replaces AP3875639, 1170107, 197D2039P007, 197D2039P008, PS1019114, WR23X10353, WR23X10355, WR23X10364, WR60X10043, WR60X10154, and others listed below. If your old connector has a white thermistor wire, you need WR60X10074 instead; if it has a light connector, you need WR23X10467. Common Problems This Part Fixes Fresh food compartment running warmer than normal while the freezer stays reasonably cold Unusual noise — humming, buzzing, or grinding — coming from the freezer Freezer not cooling properly, which in turn affects compressor performance Frost or ice buildup accumulating around the fan blade or evaporator coil Refrigerator running continuously as it struggles to maintain temperature Fan motor that has burned out due to an obstruction preventing the blade from turning Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers: WR60X10185, WR60X10043, WR60X10059, WR60X10068, WR60X10083, WR60X10084, WR60X10099, WR60X10149, WR60X10152, WR60X10154, WR60X10157, WR23X10346, WR23X10350, WR23X10353, WR23X10355, WR23X10364, WR23X10404, WR23X10405, WR23X10406, 197D2039P013, 1170107, UDQT26GE4, AP3875639, AGE29155, PD00000986, PS1019114, EAP1019114 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This evaporator fan motor is compatible with select GE and Hotpoint refrigerators, and also fits select Kenmore, Haier, Monogram, and Café refrigerators built on the GE platform. Note — check your connector before ordering: GE uses several different evaporator fan motor variants that look nearly identical, and choosing the wrong one means the connector or function won't match your refrigerator. This WR60X10185 motor has no thermistor and a plain 4-wire harness with 2 empty slots on its 6-pin connector. If your old motor's connector has a white thermistor wire in it, you need WR60X10074 instead (harness with integrated thermistor). If your old connector instead has a dedicated light connector, you need WR23X10467. This part is also a separate motor from our WR60X10318 listing, which is a side-by-side platform assembly with its own integrated thermistor and a longer harness. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which motor fits your refrigerator. Key Features Aftermarket replacement built to match GE's factory-specified motor and blade design Pulls air across the evaporator coils and circulates it through the freezer and fresh food compartments Resolves "fresh food warm while freezer stays cold," "unusual noise," and "frost buildup" symptoms caused by fan motor failure Rated 9.75V DC, 3.25W Includes the fan motor and 4-wire harness assembly (does not include thermistor) Direct drop-in replacement matching the original mounting and blade fitment Replaces a wide range of legacy WR23X and WR60X part numbers plus AP3875639 and PS1019114 Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number XPWR60X10185 OEM Part Number WR60X10185 Part Type Refrigerator Evaporator Fan Motor Condition Aftermarket Replacement Brand GE Location Freezer compartment Voltage 9.75V DC Wattage 3.25 W Harness 4-wire, 6-pin connector (2 pins unused) Includes Thermistor No Quantity 1 fan motor Compatible Brands GE, Hotpoint, Kenmore, Haier, Monogram, Café Installation Notes ⚠️ Unplug Refrigerator Before Starting — Check Your Connector Type First Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Before removing the old motor, look closely at its connector: confirm it's a plain 4-wire harness with no thermistor wire and no separate light connector, matching this replacement. Access is through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator coil and fan assembly. If there's significant frost or ice around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new WR60X10185 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, nut driver, work gloves. Frequently Asked Questions How do I know if I need this motor or the one with the thermistor? Look directly at your old motor's electrical connector before ordering. This WR60X10185 motor has a plain 4-wire harness on a 6-pin plug, with two of the six pin positions left empty — there's no thermistor wire involved. If your connector instead has a white thermistor wire running into it, you'll need WR60X10074, which includes an integrated thermistor and is not interchangeable with this motor. If your connector has a separate plug specifically for a freezer light, you'll need WR23X10467 instead. My fresh food section is warm but the freezer seems fine. Is this the right part? Yes, this is a very common and telling symptom pattern. The freezer sits right next to the evaporator coil and can stay reasonably cold through proximity even with weakening air circulation, but the fresh food compartment depends entirely on the fan pushing cold air through the ducting to reach it. When the fan motor fails or slows down, the fresh food side is usually the first and most noticeably affected area, and GE's own guidance confirms that a fresh-food-warm/freezer-fine pattern points to this fan. Why would a fan motor "burn out quickly" instead of just wearing out slowly? While this motor generally has a long service life, it can fail rapidly if something obstructs the fan blade from turning — commonly built-up frost or ice, or occasionally debris. When the blade can't turn freely, the motor works against resistance it wasn't designed for, which accelerates internal wear and can burn it out much faster than normal aging would. Clearing ice from around the fan before or during replacement helps prevent stressing the new motor the same way. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the original 9.75V, 3.25W motor design, blade fitment, and 4-wire harness configuration of the fan motor originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

W11452196 Refrigerator Evaporator Fan Motor – Replacement for Whirlpool, Maytag, KitchenAid, Amana Product Overview This Evaporator Fan Motor is a replacement part for specific Whirlpool refrigerator models. It circulates cool air within the refrigerator compartment to maintain even temperatures throughout. The evaporator motor works in conjunction with the cooling system, drawing in warm air and distributing cold air via its high-efficiency fan blades.  Causes of a bad evaporator motor can include normal wear over many operating hours, damages from dust or debris buildup, and failures in the motor winding or power control mechanisms. Replaces Part Numbers This motor replaces part numbers W11452196, W11032800, WPW10514110, W10514110, W10728094, W10466226, W10561029, W11374554, AP6987262, PS16217991. It is engineered to match the performance and fit of the original OEM part for reliable operation. Compatible Brands Compatible with a wide range of Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, and Kenmore refrigerators that use this style of evaporator fan motor. Fits many bottom freezer, French door, and side-by-side models. Fixes the Following Issues Refrigerator or freezer not cooling properly Inconsistent or uneven airflow Loud or non-functioning fan motor Ice buildup due to poor air circulation Why Buy from Parts‑O‑Matic Cost-effective aftermarket solution Fast and free U.S. shipping Trusted by appliance repair technicians and DIYers Simple installation and responsive customer support

Read more less