74009592CM Burner Control Knob
Black plastic burner knob
Fits Specific Maytag, Jenn Air, Whirlpool ranges
Replaces Part Numbers: WP74009592, 74009592, 1032643, 71003477, AP6011140, PS11744334.
Description: This Top Burner Control Knob is a replacement part for specific Whirlpool ranges and cooktop models. This part allows for precise control over the heat level of the stove's burners, enabling users to adjust the flame size for various cooking needs. Constructed from durable materials, the knob is designed to withstand the rigors of daily use, providing a reliable interface for setting and maintaining the desired cooking temperature.
This is an aftermarket part that can be used as a replacement for the OEM part.
A00126401 Genuine OEM Frigidaire Dishwasher Drain Pump Motor
The A00126401 is a genuine Frigidaire OEM drain pump motor assembly for Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, and Kenmore dishwashers. At the end of each wash cycle, this pump is what actually pushes the used wash water out of the tub and through the drain hose, clearing the way for the next fill. An internal impeller spins to create that flow, drawing water in and forcing it out through the drain line.
Rated 120V, 60Hz, 35W, 0.8A, 3600RPM, with 1/4" male terminals, this assembly includes the pump motor, impeller, and seal. Common causes of failure include clogs from food particles or debris interfering with the impeller, worn or damaged impeller blades, and electrical failure of the motor itself. A failing drain pump typically shows up as water not draining from the dishwasher, water pooling at the bottom of the tub after a cycle, a grinding or humming noise from the pump area, or the dishwasher refusing to start a new cycle because it detects standing water left over from the last one. It directly replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, and EAP2363535.
Quick Answer
The A00126401 Genuine OEM Frigidaire Dishwasher Drain Pump Motor fixes Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, and Kenmore dishwashers that won't drain, pool water at the bottom of the tub, make grinding or humming noises, or won't start a new cycle due to leftover water. 120V, 60Hz, 35W, 0.8A, 3600RPM. Replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, EAP2363535. Before replacing the pump, check the drain hose and sump screen for a simple clog — one customer replaced the pump, still had no drainage, and found a clogged drain hose was the actual cause.
Common Problems This Part Fixes
Dishwasher won't drain at the end of the cycle
Water pooling at the bottom of the tub after a completed cycle
Grinding or humming noise coming from the pump area
Dishwasher won't start a new cycle because it detects leftover water from the previous one
Dishes not getting properly cleaned due to poor water circulation
Pump running but producing little or no actual drainage
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher drain pump motor directly replaces the following OEM and cross-reference part numbers:
A00126401, 154736201, 3015405, 5304492415, PD00000922, EAP2363535, AFR20557, AP5690431, PS8689824
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain pump motor is compatible with select Frigidaire dishwashers, and also fits select Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, and Kenmore/Sears dishwashers built on the same platform.
Note: This assembly includes the pump motor, impeller, and seal. Whether a check valve flapper is included can vary by supplier batch — inspect your old pump's flapper condition before assuming one is included, and contact our support team if you need to confirm. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Frigidaire OEM part — factory-specified motor speed and impeller design
Pumps water out of the tub and through the drain hose at the end of each cycle
Resolves "won't drain," "water pooling," "grinding or humming noise," and "won't start due to leftover water" symptoms caused by pump failure
Includes pump motor, impeller, and seal
Rated 120V, 60Hz, 35W, 0.8A, 3600RPM
1/4" male terminals for a direct plug-in electrical fit
Direct drop-in replacement — no modification required
Replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, and EAP2363535
Compatible with Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, and Kenmore dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
A00126401
Part Type
Dishwasher Drain Pump Motor Assembly
Condition
Genuine OEM
Brand
Frigidaire
Voltage
120V
Frequency
60 Hz
Wattage
35 W
Amperage
0.8 A
Motor Speed
3600 RPM
Terminals
1/4" male
Kit Contents
Pump motor, impeller, seal
Dimensions
Approx. 3-1/4"L x 2-1/2"W x 3-3/4"H
Color
White / Green
Repair Difficulty
Easy to Moderate — under an hour
Quantity
1 drain pump motor assembly
Compatible Brands
Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, Kenmore
Installation Notes
⚠️ Unplug Dishwasher Before Starting — Rule Out A Simple Clog First Before replacing the pump, check the drain hose and the sump screen at the bottom of the tub for a clog — food debris and buildup in the hose can produce identical "won't drain" symptoms to a failed pump, and clearing a clog costs nothing but a few minutes. One customer replaced the pump entirely, still had no drainage, and only afterward discovered the actual cause was a clogged drain hose; disconnecting and running a cycle without the hose attached can help confirm whether the pump itself is pushing water. Once you've confirmed the pump needs replacing, disconnect power at the outlet or shut off the circuit breaker, and pull the dishwasher out from under the counter for access to the underside — removing the two screws securing it to the counter first. Have a drain pan or towels ready for residual water. Photograph the wiring and hose connections before disconnecting anything. Disconnect the two wire connectors from the old pump, remove the three screws securing it in place, and disconnect the hose connections, then pull the old pump free. Install the new A00126401 in the same position, reconnect the hose connections, and reconnect the two wire connectors. Secure the pump with its three mounting screws. Slide the dishwasher back into place and secure it to the counter, restore power, and run a full test cycle to confirm normal draining with no leaks or unusual noise. Tools needed: Phillips screwdriver, flat-blade screwdriver, needle-nose pliers, drain pan, work gloves.
Frequently Asked Questions
My dishwasher won't drain. How do I know if it's actually the pump and not something simpler?
Check the drain hose and the sump screen at the bottom of the tub for a clog first — this is a genuinely common cause of "won't drain" symptoms and costs nothing to rule out. If the hose and screen are clear and the pump still won't run, test the pump motor with a multimeter for continuity. If there's no continuity, or the pump is getting power but still won't run, replacement is the correct fix.
I already replaced the pump and it's still not draining. What should I check next?
This has happened to real customers, and the cause was ultimately a clogged drain hose rather than the pump itself. If replacing the pump didn't solve the drainage problem, disconnect the drain hose and run a test cycle to see whether water is being pushed out at all — if it is, the hose downstream is the likely culprit and worth snaking out or replacing.
Does this kit include the check valve flapper?
This varies by supplier batch — this assembly reliably includes the pump motor, impeller, and seal, but flapper inclusion isn't consistent across all sources. Inspect your old pump's flapper for wear or damage before installation, and contact our support team if you need to confirm whether a flapper is included with your specific order.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original motor speed, impeller design, and terminal configuration of the drain pump originally installed in your dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO HVAC Capacitor Contractor Pack — 18-Piece Assortment Kit (Dual + Single Run)
The XPARTCO HVAC Capacitor Contractor Pack bundles the seven most commonly needed dual run capacitor ratings, plus two single run capacitor ratings, into a single 18-piece kit, so a technician can carry one box instead of restocking capacitors between jobs. Each dual run capacitor combines two capacitors into one round, three-terminal can — one rated for the compressor, one for the condenser fan motor — the standard design used across the vast majority of residential and light commercial split systems, window units, and heat pumps. The single run capacitors are 2-terminal units sized for one motor circuit, commonly used on standalone condenser fan motors, pool pumps, and other single-phase motor equipment.
The mix in this kit is weighted toward the ratings that fail most often in the field: 35/5, 40/5, and 45/5 MFD capacitors cover the majority of residential 1.5–3.5 ton systems and are included in higher quantities, while 50/5, 60/5, 70/5, and 80/5 MFD round out coverage for larger residential and light commercial compressors. All fourteen capacitors are rated 450VAC, so each one is a safe upgrade replacement regardless of whether the original equipment was speced at 370V, 440V, or 450V.
Quick Answer
The XPARTCO HVAC Capacitor Contractor Pack is an 18-piece assortment covering the seven dual run capacitor ratings most commonly replaced on residential and light commercial AC systems and heat pumps, plus two single run capacitor ratings for fan motors and similar equipment: 35/5 (×2), 40/5 (×4), 45/5 (×4), 50/5 (×1), 60/5 (×1), 70/5 (×1), 80/5 (×1), single-run 5 (×2), and single-run 7.5 (×2) MFD, all rated 450VAC, round. Built for technicians who want to stock a truck once instead of reordering capacitors mid-week. Capacitors store a dangerous electrical charge even after power is disconnected — always discharge before handling.
What's In The Kit
Capacitor Rating
Qty
Typical Application
35/5 MFD, 450V, Round
2
Smaller residential split systems, window/PTAC units
40/5 MFD, 450V, Round
4
Common residential 2–2.5 ton systems — high-frequency replacement size
45/5 MFD, 450V, Round
4
Common residential 2.5–3 ton systems — high-frequency replacement size
50/5 MFD, 450V, Round
1
Mid-size residential systems, 3–3.5 ton
60/5 MFD, 450V, Round
1
Larger residential systems, 3.5–4 ton
70/5 MFD, 450V, Round
1
Larger residential/light commercial systems, 4–5 ton
80/5 MFD, 450V, Round
1
Larger compressors and light commercial equipment
5 MFD, 450V, Round (Single Run)
2
Standalone condenser fan motors, pool pumps, small single-phase motors
7.5 MFD, 450V, Round (Single Run)
2
Standalone condenser fan motors, pool pumps, small single-phase motors
Common Problems This Kit Solves
Outdoor AC unit hums but the compressor won't start
Condenser fan won't spin, or spins slowly and needs a manual push to get going
System trips the breaker shortly after starting
AC blows warm air because the compressor isn't running
Repeated clicking sound from the contactor as it tries and fails to start the motor
Capacitor can visibly bulging, domed on top, or leaking oily residue
Needing a specific capacitor rating on the spot without a return trip to the supply house
Compatibility
This kit's capacitors are universal replacements compatible with central air conditioners, heat pumps, and condensing units across all major HVAC brands, wherever the original capacitor's MFD rating matches one included in this kit and its voltage rating is 450V or lower (370V and 440V equipment included, since a higher voltage rating is always a safe upgrade).
Note: The MFD (microfarad) rating must match the original capacitor exactly on both the compressor and fan sides — do not substitute a different MFD value. If a job calls for a rating not included in this kit (such as a 25/5, 30/5, or 55/5), each individual dual run capacitor rating is also available separately in our HVAC capacitor line. Contact our support team if you'd like help confirming which rating a specific job needs.
Key Features
18-piece assortment covering the 7 most commonly replaced dual run ratings plus 2 single run ratings
Quantities weighted toward the highest-frequency replacement sizes (35/5, 40/5, 45/5)
All capacitors rated 450VAC — a safe upgrade for equipment originally speced at 370V or 440V
Round can construction — 3-terminal (C, Herm, Fan) dual run capacitors and 2-terminal single run capacitors
Polypropylene film construction; safety approved CQC, VDE, TÜV, CL; built to GB/T 3667 and EN 60252 standards
Operating temperature range -40°C to 70°C (-40°F to +158°F)
Eliminates truck-stock gaps — one kit replaces reordering single capacitors between jobs
Each rating also available individually for restocking a single value
Kit Specifications
Kit Contents
18 capacitors — 14 dual run across 7 ratings + 4 single run across 2 ratings (see table above)
Capacitor Types
Dual Run (Compressor + Fan) and Single Run
Condition
New — Universal Replacement Parts
Voltage Rating (all pieces)
450VAC
Shape
Round
Terminals
3 per dual run capacitor / 2 per single run capacitor (1/4" quick-connect)
Frequency
50/60 Hz
Tolerance
±5%
Construction Type
Polypropylene film capacitor
Operating Temperature Range
-40°C to 70°C (-40°F to +158°F)
Safety Approvals
CQC, VDE, TÜV, CL
Approval Standard
GB/T 3667, EN 60252
Application
Central Air Conditioners, Heat Pumps, Condensing Units
Compatible Brands
Universal — all major HVAC brands
Installation Notes
⚠️ Danger — Capacitors Store A Dangerous Electrical Charge Shut off power to the outdoor unit at the disconnect box and at the breaker before beginning any capacitor replacement. A capacitor stores an electrical charge even after power has been disconnected, and that charge can deliver a serious or fatal shock. Before touching any terminal, discharge the capacitor fully: on a dual run capacitor, short each pair of terminals together (C-to-Fan, C-to-Herm, and Fan-to-Herm); on a single run capacitor, short the two terminals together. Use an insulated-handle screwdriver, or a proper capacitor discharge tool with a resistor. Never short the terminals with a bare metal tool held with your bare hand.
⚠️ Match The Rating Before Installing — Photograph Wiring First Confirm the failed capacitor's MFD rating on both the compressor and fan sides, and select the matching piece from this kit — the rating printed on the old capacitor's can is the reference, not the equipment's tonnage. Photograph the wiring on the old capacitor's terminals before disconnecting anything; terminals are typically labeled C (Common), Herm or Comp (compressor), and Fan. Remove the mounting strap holding the old capacitor, disconnect each wire, and install the replacement from this kit in the same mounting position, reconnecting each wire to the matching terminal. Restore power and confirm the compressor and fan both start promptly and run smoothly. Tools needed: insulated-handle screwdriver or capacitor discharge tool, nut driver, work gloves, safety glasses.
Frequently Asked Questions
Why are 35/5, 40/5, and 45/5 included in higher quantities than the others?
These three ratings cover the size range used on the largest share of residential split systems in the field, so they're the ratings most likely to come up repeatedly across a week of service calls. The larger ratings (50/5 through 80/5) still come up regularly but less often, which is why the kit includes one of each rather than duplicates.
What if a job needs a rating that isn't in this kit, like 25/5 or 55/5?
Every rating in this kit — both dual run and single run — is also sold individually, so you can pick up less common values as needed without buying another full kit. Contact our support team if you want help identifying which individual rating a specific job calls for.
Can I use a 450V capacitor from this kit to replace an original 370V or 440V capacitor?
Yes. Voltage rating is a ceiling, not an exact match requirement — a capacitor rated for a higher voltage than the original works safely and often lasts longer under the same electrical stress. What you can't do is go the other direction, so every capacitor in this kit being 450V means it's a safe fit anywhere the original was rated 370V, 440V, or 450V.
Does the MFD rating need to match exactly, or is there some tolerance?
Match the rating on both the compressor and fan side as closely as possible to the original — these capacitors carry a ±5% manufacturing tolerance, but that's not the same as intentionally substituting a different rated value. Always select the kit piece whose printed MFD rating matches what was on the failed capacitor.
Is this a genuine OEM kit?
This is a universal replacement kit rather than a brand-specific OEM product. Because dual run capacitors are a standardized component defined by their electrical specifications rather than their manufacturer, each capacitor in this kit is a correct replacement for any unit's original capacitor sharing the same rating — regardless of which HVAC brand originally installed it.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Replacement Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 5304511738 Refrigerator LED Light Bulb
The XPARTCO 5304511738 is an aftermarket replacement LED refrigerator light bulb compatible with select Frigidaire, Electrolux, Kenmore, and Crosley refrigerators in the FFSS, LFSS, CRSE, FFHX, and related series. This LED bulb mounts inside the refrigerator or freezer cabinet and provides interior lighting when the door is opened. The 5304511738 uses a standard E26/E27 screw base and is rated at 3.5W, 120V, producing bright white light from 24 individual LED elements. It replaces the older-style incandescent refrigerator bulb with a longer-life, lower-energy LED equivalent that generates less heat inside the refrigerator cabinet.
The bulb features a wide voltage design rated 85V–265V, making it compatible with both standard 110V and 220V electrical systems. It directly replaces PS12364857, AP6278388, 4584444, PS11767930, RLB11738, KEI D34L, KEID34L, KEL3418L, and the associated cross-reference numbers. Sold individually. Installs in under 2 minutes — unscrew the old bulb and screw in the new one.
Quick Answer
The XPARTCO 5304511738 Refrigerator LED Light Bulb replaces a burned out, dim, or flickering interior light in compatible Frigidaire, Electrolux, Kenmore, and Crosley refrigerators. 3.5W, E26/E27 base, 85V–265V, white light, 24 LEDs. Compatible with Frigidaire FFSS, LFSS, CRSE, FFHX series and related models. Replaces PS12364857, AP6278388, 4584444, KEI D34L, KEID34L, KEL3418L, RLB11738. Sold individually. Screws in — no tools required.
Common Problems This Part Fixes
Refrigerator interior light not working — bulb burned out
Refrigerator light dim or flickering — bulb nearing end of life
Refrigerator light on but very low brightness — LED elements failing
Original incandescent bulb generating too much heat inside the cabinet
Upgrading from incandescent to longer-life LED for energy savings
Replaces Part Numbers
This LED light bulb directly replaces the following OEM and cross-reference part numbers:
5304511738, 241560701, KEI D34L, KEID34L, KEL 3418L, KEL3418L, RLB11738, AFR17812, AP6278388, EAP12364857, PD00045325, PS12364857.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This LED light bulb is compatible with select refrigerators from the following brands and series:
Frigidaire refrigerators — FFSS2315, FFSS2615, FFSS2625, LFSS2312, LFSS2612, CRSE233, CRSE263, FFHX2325, FFHT1821 and related series
Electrolux refrigerators (select models using the same E26/E27 socket)
Kenmore / Sears refrigerators (select Frigidaire/Electrolux-built models)
Crosley refrigerators (select models)
Note: Before ordering, verify that your refrigerator uses a standard screw-base (E26/E27) bulb socket. Some newer refrigerators use proprietary LED modules or LED assemblies that are not interchangeable with standard screw-base bulbs. Always verify your model number before purchasing.
Key Features
LED replacement for the standard refrigerator interior light — longer lifespan and lower energy use than incandescent equivalents
3.5W power consumption — significantly more energy-efficient than the original 25W–40W incandescent bulb
24 individual LED elements — bright, even, shadow-free white light illumination inside the cabinet
E26/E27 universal screw base — fits the standard refrigerator bulb socket directly
Wide voltage design: 85V–265V — compatible with standard 110V household current
Less heat generated inside the refrigerator compared to incandescent bulbs — helps maintain consistent internal temperature
Replaces PS12364857, AP6278388, 4584444, KEI D34L, KEID34L, KEL3418L, and RLB11738
Sold individually — order 2 if your refrigerator has two light sockets
Aftermarket replacement built to OEM-equivalent quality standards
Installs in under 2 minutes — no tools required
Product Specifications
Part Number
5304511738
Part Type
Refrigerator LED Interior Light Bulb
Condition
Aftermarket Replacement
Wattage
3.5W
Voltage
85V–265V (wide voltage / 120V standard US)
Amperage
0.038A (at 120V)
LED Count
24 LEDs
Light Color
White
Base Type
E26/E27 screw base (universal)
Sold As
Single bulb
Installation
Screw-in — no tools required
Compatible Brands
Frigidaire, Electrolux, Kenmore, Crosley
Installation Notes
⚠️ Unplug Refrigerator Before Replacing the Bulb Unplug the refrigerator before replacing the bulb to avoid electric shock. Open the refrigerator door and locate the light bulb socket — it is typically behind a plastic light cover or lens on the interior ceiling or side wall of the fresh food section. Remove the plastic light cover if present (it usually snaps off or slides forward). Turn the old bulb counter-clockwise to unscrew and remove it. Screw the new 5304511738 LED bulb in clockwise until snug — do not overtighten. Replace the light cover, restore power, and open the door to confirm the light works.
Frequently Asked Questions
Will this LED bulb work as a direct replacement for the original incandescent bulb?
Yes — the 5304511738 LED bulb uses the same E26/E27 screw base as the original incandescent refrigerator bulb and draws from the same 120V socket. It screws in exactly like the original and produces bright white light. The LED version uses only 3.5W compared to the typical 25W–40W of an incandescent refrigerator bulb, which means lower energy use and significantly less heat generated inside the refrigerator cabinet — both of which are improvements over the original.
My refrigerator has two light sockets — do I need two bulbs?
Yes — if your refrigerator has two light sockets (one for the fresh food section and one for the freezer, or two in the fresh food section), you will need two bulbs. This listing is for a single bulb. Order two to replace both sockets at the same time — replacing both ensures even light output and prevents being left without light shortly after when the second older bulb burns out.
What are the KEI D34L, KEID34L, and KEL3418L designations?
KEI D34L, KEID34L, and KEL3418L are model designations printed on the original Frigidaire refrigerator LED bulb or its housing — they are not traditional part numbers but are used by some parts databases as cross-references for the 5304511738. If you see any of these designations on your old bulb or in your refrigerator's parts list, the 5304511738 is the correct replacement.
My refrigerator light doesn't work but the new bulb also doesn't light up — what else could it be?
If the new bulb does not light up after installation, the bulb is likely not the cause of the problem. Other possible causes include a failed door switch (the switch that tells the refrigerator the door is open and turns on the light), a wiring issue in the light circuit, or a failed control board relay that supplies power to the light socket. Test the door switch by pressing and releasing it manually — if the light activates when you press it and turns off when you release it, the switch is working and the issue is elsewhere in the circuit.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Frigidaire OEM part, but is manufactured with 24 LED elements in an E26/E27 base to match the light output and fit of the original 5304511738 refrigerator LED bulb.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 279816 Dryer Thermostat Kit
The XPARTCO 279816 is an aftermarket replacement thermal fuse and high-limit thermostat combo kit for Whirlpool-built dryers. These are the dryer's two thermal safety devices, and they're bundled together in this kit because they tend to fail around the same time and share a common cause: restricted airflow that lets heat build up beyond safe levels. The high-limit thermostat is the first line of defense, opening at approximately 250°F (L250-80F) to interrupt heating if the dryer runs too hot. If that isn't enough to bring the temperature back down, the thermal fuse is the final failsafe, opening permanently at approximately 309°F to cut power to the dryer entirely.
That's an important distinction between the two parts: the high-limit thermostat is a cycling safety device that can open and close as temperature rises and falls, while the thermal fuse is a one-time device — once it blows, it's done, and the dryer won't run again until it's replaced. This kit includes both components plus mounting screws and a wiring set with a jumper wire and extra terminals, which is used specifically when replacing an older-style thermostat that had a wire pressing directly onto the heating element. A dryer that won't start at all, with no lights or response, usually means the thermal fuse has blown; a dryer that runs but won't heat, or that stops heating partway through a cycle, points more toward the thermostat. It directly replaces 2651, 279816VP, 3399848, 3977393, 3390291, AP3094244, AH334299, EA334299, EAP334299, PD00002348, and PS334299.
Quick Answer
The XPARTCO 279816 Dryer Thermostat Kit fixes Whirlpool-built dryers that won't start at all, won't heat, or stop heating partway through a cycle. Includes a thermal fuse (opens ~309°F), a high-limit thermostat (opens ~250°F), mounting screws, and a wiring set. Replaces 2651, 279816VP, 3399848, 3977393, 3390291, AP3094244, AH334299, EA334299, EAP334299, PD00002348, PS334299. Always inspect and clean the dryer venting when replacing this kit — a blown fuse or tripped thermostat is a symptom of restricted airflow, and skipping this step means the new parts are likely to fail again.
Common Problems This Part Fixes
Dryer won't start at all — no lights, no tumble, no response to any button
Dryer runs and tumbles but produces no heat
Dryer heats for a while, then stops heating partway through a cycle
Dryer that stopped working suddenly, especially after running unusually hot
Clothes coming out extremely hot right before the dryer stopped heating or stopped entirely
Repeated blown fuses or tripped thermostats on a dryer with a known venting restriction
Continuity test shows an open circuit across the old fuse or thermostat
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer thermostat kit directly replaces the following OEM and cross-reference part numbers:
279816, 279816VP, 3399848, 3977393, PD00002348, AWP39198, EAP334299, AH334299, EA334299, AP3094244, PS334299.
3977393 is the thermal fuse component and 3390291 is the "new-style" high-limit thermostat component included in this kit. If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermostat kit is compatible with select Whirlpool-built dryers across the Whirlpool family of brands, including:
Whirlpool electric and gas dryers — WED series
Maytag electric and gas dryers — NED series (select Whirlpool-built models)
Admiral, Amana, Crosley, Estate, Inglis, Magic Chef, and Roper dryers (select models)
Kenmore and KitchenAid dryers (select Whirlpool-built models)
Verified model numbers include: WED6200SW1, NED4600YQ0, NED4600YQ1, NED4655EW1, and LER3624EQ.
Note: The wiring set included in this kit is designed for replacing an older-style thermostat that used a wire pressed directly onto the heating element. If your dryer uses the true old-style push-on thermostat and fuse combination (part 3977767), you'll need a different kit (commonly listed as APN197) instead of this one. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which kit fits your dryer.
Key Features
Complete combo kit — thermal fuse, high-limit thermostat, mounting screws, and wiring set in one package
Thermal fuse opens at approximately 309°F as a one-time, non-resettable safety cutoff
High-limit thermostat opens at approximately 250°F (L250-80F) as a cycling safety device
Resolves "won't start at all," "runs but doesn't heat," and "stops heating mid-cycle" symptoms
Wiring set includes jumper wire and extra terminals for older-style push-on thermostat connections
Replaces 2651, 279816VP, 3399848, 3977393, 3390291, AP3094244, AH334299, EA334299, EAP334299, PD00002348, and PS334299
Compatible with Whirlpool, Maytag, Admiral, Amana, Crosley, Estate, Inglis, Magic Chef, Roper, Kenmore, and KitchenAid dryers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
279816
OEM Part Number
279816
Part Type
Dryer Thermal Fuse & High-Limit Thermostat Kit
Condition
Aftermarket Replacement
Kit Contents
Thermal fuse, high-limit thermostat, mounting screws, wiring set
Thermal Fuse Opening Temp
Approx. 309°F (one-time, non-resettable)
High-Limit Thermostat Opening Temp
Approx. 250°F / L250-80F (cycling)
Wiring Set
Jumper wire + extra terminals for older-style push-on thermostats
Quantity
1 kit
Compatible Brands
Whirlpool, Maytag, Admiral, Amana, Crosley, Estate, Inglis, Magic Chef, Roper, Kenmore, KitchenAid
Installation Notes
⚠️ Unplug Dryer Before Starting — Inspect And Clean The Venting Before Reassembling Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel: remove the screws securing the panel to reach the blower housing area where both the thermal fuse and high-limit thermostat are mounted, usually close together near the heating element or blower assembly. Photograph the wiring before disconnecting anything, and note whether your old thermostat used a push-on wire connection at the heating element — if so, use the included jumper wire and extra terminals to make the new connection correctly. Remove the mounting screws holding each old component in place and disconnect their wire terminals. Before installing the new parts, test the old fuse and thermostat with a multimeter to confirm which one (or both) is actually open, rather than assuming. This is the most important step: fully inspect and clean the dryer's exhaust vent, from the lint trap housing all the way to the exterior vent hood, checking for lint buildup, crushed sections, or excessive length. A blown fuse or tripped thermostat is a symptom of restricted airflow, and skipping this step means the new parts are likely to fail again. Install the new thermal fuse and thermostat from this kit in the same mounting positions, reconnect the wire terminals (using the included wiring set if applicable), and secure the mounting screws. Reinstall the rear panel, restore power, and run a test cycle to confirm normal heating and shutoff behavior. Tools needed: Phillips or nut driver (model-dependent), multimeter, vent brush or vacuum attachment for cleaning ductwork, work gloves.
Frequently Asked Questions
Why does this kit include two different parts instead of just one?
The thermal fuse and high-limit thermostat work together as a two-stage safety system, and they're bundled because they commonly fail together — both are reacting to the same underlying overheating condition, usually restricted airflow. The high-limit thermostat trips first at a lower temperature and can cycle open and closed; if that's not enough to control the heat, the thermal fuse trips at a higher temperature and shuts the dryer down permanently until replaced. Replacing both together addresses the full safety chain rather than just one link in it.
My dryer won't start at all versus my dryer runs but doesn't heat — which part is which?
A dryer with absolutely no response — no lights, no tumbling, nothing — usually points to the thermal fuse, since it's wired to cut power more broadly when it blows. A dryer that tumbles and runs normally but produces no heat, or that starts heating and then stops partway through, points more toward the high-limit thermostat. Testing both components with a multimeter will confirm exactly which one has failed.
I replaced both parts and the dryer failed again. What's going on?
This is a strong sign that the underlying cause — almost always restricted airflow — was never addressed. Neither of these parts fails from age; they trip or blow because the dryer overheated. If new parts fail again, thoroughly inspect and clean the entire exhaust path from the lint trap housing to the outside vent hood, checking for lint buildup, crushed or kinked ductwork, or a vent run that's too long. If airflow checks out and the parts still fail, have the heating element checked as well, since a shorted element can also drive excess heat.
Do I need the wiring set included in this kit?
Only if your dryer's original thermostat used a wire that pressed directly onto the heating element (an older-style connection) rather than a standard push-on terminal. If your dryer already uses a straightforward terminal connection, you can skip the jumper wire and extra terminals and connect the new thermostat directly.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the opening temperatures, terminal configuration, and mounting positions of the original 279816 thermal fuse and high-limit thermostat kit used in compatible Whirlpool, Maytag, and related dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
ERP DA47-00244Q Refrigerator Defrost Heater
Replaces Part Numbers:DA47-00244Q, AP5587899, PS4140528.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO 3406107 Dryer Door Switch Replaces WP3406107
The XPARTCO 3406107 is an aftermarket replacement door switch for Whirlpool, Kenmore, Maytag, and KitchenAid dryers. Mounted inside the upper corner of the front panel, this safety switch has a spring-loaded black tab that gets pressed in when the door closes. That contact tells the control board the door is shut, which is required before the dryer will start, and it also powers the interior drum light. Over time the switch's internal contacts wear out or the tab loses spring tension, and the dryer either won't start at all or runs with the door open — a safety condition the switch is specifically designed to prevent.
This is a three-wire SPDT (single pole, double throw) switch built to the same dimensions and mounting points as the original, and it's designed to remain compatible with older two-wire harnesses as well. Direct-fit aftermarket replacement, no wiring modifications needed.
Quick Answer
The XPARTCO 3406107 Dryer Door Switch fixes a dryer that won't start, runs with the door open, or has a dead interior light. Direct-fit replacement for OEM WP3406107. Classic symptom: pressing start does nothing until you push and hold the door shut, or the drum light never comes on.
Common Problems This Part Fixes
Dryer won't start even though the door is closed
Dryer runs with the door open (safety switch failure)
Interior drum light doesn't turn on
Door doesn't seem to latch or seal properly against the switch tab
Drum doesn't spin, or cycle stops intermittently
Touchpad or start button appears unresponsive
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This door switch directly replaces the following part numbers:
WP3406107, WPW10569603, 3406107, 3406109, W10569603, 3405100, 3405101, 3406100, 3406101, ES6107, 528948, 11259-65, PD00002378, EAP11741701, AP6008561, AWP47183, PS11741701
This switch design was updated to a three-wire configuration at some point in its production history (superseding older 3405100/3405101/3406100/3406101 numbers), but the current three-wire version remains compatible with older two-wire harnesses, so it's a safe direct replacement across all of these part numbers.
Compatibility
This door switch is compatible with a wide range of Whirlpool, Kenmore, Maytag, and KitchenAid dryers, including units across the:
Whirlpool/Kenmore Series 60, 70, 80, 90, 500, 600, 700, and 800 dryer lines
AED4475TQ1, MEDC400VW0, and numerous additional model numbers
Note: This switch has been used across a very wide range of Whirlpool-built dryers (including Kenmore, Maytag, and KitchenAid badged units) spanning many production years, so the list above is only a sample. Confirm your model number against your dryer's parts diagram, or contact our support team to verify fit before ordering.
Key Features
Direct-fit aftermarket door safety switch for Whirlpool-built dryers
Three-wire SPDT design, backward-compatible with two-wire harnesses
Controls both the start-permission safety interlock and the interior drum light
Resolves no-start, runs-with-door-open, and dead-light symptoms
White plastic and metal tab construction, approx. 6.5" length
Straightforward swap — typically 15–30 minutes with basic hand tools
Product Specifications
Part Number
3406107
OEM Part Number
WP3406107
Part Type
Dryer Door Safety Switch
Condition
Aftermarket Replacement
Switch Type
SPDT (Single Pole, Double Throw)
Wire Configuration
Three-Wire (Backward-Compatible with Two-Wire Harnesses)
Length
Approx. 6.5 Inches
Color / Material
White; Plastic & Metal Construction
Application
Whirlpool, Kenmore, Maytag & KitchenAid Dryers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer or switch off its circuit breaker before beginning. The switch is mounted inside the upper corner of the front panel, so you'll need to remove the front panel or top panel per your model's service guide to access it. Disconnect the wire connector from the old switch, then remove the mounting screw(s) holding it in place. Install the new switch in the same position, reconnect the wire connector, and reinstall the panel. Before closing everything up, you can test the switch by pressing the black tab — you should feel spring resistance and hear or feel a distinct click. Restore power and confirm the dryer starts normally with the door closed and stops when the door is opened.
Frequently Asked Questions
My dryer won't start — is this the part I need?
This is one of the most common causes of a dryer that won't start even with the door closed. Try pressing the black tab on the switch by hand — if it feels loose, doesn't click, or offers no resistance, the switch has likely failed and needs replacement.
My dryer runs even with the door open — is that dangerous?
Yes, this indicates the door safety switch has failed in a way that no longer prevents operation with the door open, which is a safety hazard. Replace the switch promptly and avoid running the dryer with the door open in the meantime.
My dryer has a two-wire connector — will this three-wire switch still work?
Yes. This switch was redesigned to a three-wire configuration but remains compatible with older two-wire wiring harnesses, so it's a safe direct replacement regardless of which wire configuration your dryer currently has.
Does this switch also control the interior light?
Yes. This switch serves a dual function — it's the safety interlock that permits the dryer to run only with the door closed, and it also powers the interior drum light when the door is open.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
00622058 Dishwasher Genuine OEM Water Valve
Fits Specific Bosch Dishwasher Models
Description: This dishwasher Water Inlet Valve is a Genuine OEM part for specific Bosch dishwasher models. This component is responsible for controlling the flow of water into the dishwasher. It operates via electrical signals from the dishwasher's control board, opening to allow water to enter during the fill cycle and closing to prevent water from entering during other cycles.
✅ Key Features:
Genuine OEM Part for Bosch #00622058
120V, 60Hz single solenoid valve
Includes mounting bracket and hose connection port
Durable thermoplastic construction
🔁 Replaces Part Numbers:
00622058, 1999956, 622058, AH3491417, AP4927070, EA3491417, PS3491417, PS8728724.
🔧 Fixes These Common Symptoms:
Dishwasher not filling with water
Low or slow water flow
Water inlet error codes
Humming or clicking without water intake
Leaking around the valve area
🧰 Compatible With:
✔️ Bosch✔️ Thermador✔️ Gaggenau✔️ Siemens(Check your model number or contact us for assistance.)
✅ Affordable aftermarket solution
✅ Always Fast and Free U.S. shipping
✅ Backed by helpful support and easy returns
✅ Trusted by DIYers and appliance techs
🛒 Restore your dishwasher’s performance — order the 00622058 water inlet valve today from Parts-O-Matic.com, and get it delivered fast and free.
XPARTCO XP8767 Dryer Thermostat Set — DC47-00018A, DC96-00887C, DC47-00016A, DC32-00007A
The XPARTCO XP8767 is an aftermarket dryer thermal component set containing four heat-sensing and safety parts for select Samsung and Kenmore dryers. The set includes the high-limit thermostat (DC47-00018A), thermal fuse with bracket (DC96-00887C), blower housing thermal fuse (DC47-00016A), and thermistor temperature sensor (DC32-00007A) — the complete set of thermal components that regulate temperature and prevent overheating in compatible Samsung dryers.
When any one of these components fails, the dryer may produce no heat, run too hot, shut off too early, or fail to start. Because overheating events that blow a thermal fuse also stress the other thermal components, replacing all four together in a single repair is the recommended approach. The DC96-00887C replaces the DC96-00887A used in earlier models — both are included in this kit's cross-references. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The XPARTCO XP8767 Dryer Thermostat Set fixes Samsung and Kenmore dryers with no heat, insufficient heat, overheating, early shutoff, or failure to start. Includes all four thermal components: DC47-00018A high-limit thermostat (L260-50), DC96-00887C thermal fuse with bracket (320°F), DC47-00016A blower housing thermal fuse, and DC32-00007A thermistor. Compatible with Samsung and Kenmore (Samsung-built) dryers.
Common Problems This Set Fixes
Dryer produces no heat — thermal fuse or high-limit thermostat has failed
Dryer produces insufficient heat — thermistor not regulating temperature correctly
Dryer shuts off too early before clothes are dry
Dryer will not start at all
Dryer overheats — drum or clothes too hot at end of cycle
Dryer cycle runs but timer does not advance
Clothes not drying properly despite the dryer running normally
What's in the Set
Part 1 of 4
DC47-00018A High-Limit Thermostat
Rated L260-50 · Opens at 260°F (127°C), resets at 210°F (99°C) · Mounted on the heating element housing · Cuts power to the heating element if drum temperature exceeds safe limits · Auto-resets when cooled · Should show closed continuity at room temperature
Part 2 of 4
DC96-00887C Thermal Fuse with Bracket
Opens at 320°F (160°C) · One-time safety device mounted on the exhaust duct with bracket · Permanently cuts power to heat source if dryer overheats · Cannot be reset — must be replaced if blown · Replaces DC96-00887A used in earlier models
Part 3 of 4
DC47-00016A Thermal Fuse (Blower Housing)
Located on the blower housing · One-time safety device that cuts power to the motor if the dryer overheats · Cannot be reset — must be replaced if blown · Should show closed continuity at room temperature when working
Part 4 of 4
DC32-00007A Thermistor Temperature Sensor
Attached to the blower housing · Varies in resistance during the drying cycle to monitor and regulate drum temperature in real time · Communicates temperature readings to the control board · A failed thermistor causes incorrect drying temperatures, premature shutoff, or erratic cycle behavior
Replaces Part Numbers
DC47-00018A Dryer Hi Limit Thermostat Dryer high-limit thermostat, L260-50F. Replaces Parts Numbers: DC47-00018A, AP4201898, EAP2430930, PS2430930, ASM33627, PD00002011, 35001092, WP35001092, ASM33627, PD00004704, EAP11741822, AP6008682, PS11741822.
DC96-00887C Dryer Thermal Cut Off The fuse is not re-settable and will need to be replaced if blown. If the dryer does not heat, the thermal fuse may be blown. Replaces Part Numbers: DC96-00887C, DC96-00887A, ASM65115, PD00035400, AP4207819, EAP4216838, PS4216838, 2074129, WP35001193, 35001193, EAP11741829, AP6008689, PS11741829, AWP47381, PD00003365.
DC47-00016A Dryer Thermostat Replaces Part Number: DC47-00016A, 2068545, ASM868996, PD00003747, AP4201894, PS4205213, WP35001087, 35001087, AWP47334, PD00003747, AP6008681, PS11741821.
DC32-00007A Dryer Thermistor: Dryers Replacement Thermistor Replaces Part Numbers: DC32-00007A, ASM654843, PD00001996, 2068429, AP4201716, PS4204984, WP35001191, 35001191, 1185513, AH2038482, PD00003059, EAP11741828, AP6008688, PS11741828.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermostat set is compatible with select dryers from the following brands:
Samsung dryers (gas and electric — DV, DVE, DVG series)
Kenmore / Sears dryers (select Samsung-built models)
Important: If a thermal fuse has blown, always check for the root cause before replacing — a clogged exhaust vent is the most common cause of dryer overheating. Clean the full length of the exhaust duct before running the dryer after this repair.
Key Features
Complete 4-part thermal set — covers all Samsung dryer thermal components in a single repair
DC47-00018A high-limit thermostat (L260-50) — auto-resets; cuts heating element power at 260°F
DC96-00887C thermal fuse with bracket (320°F) — one-time safety device; replaces DC96-00887A used in earlier models
DC47-00016A thermal fuse on blower housing — one-time safety device that protects the motor
DC32-00007A thermistor — monitors real-time drum temperature and communicates with the control board to regulate drying cycles
Replacing all four parts together renews the complete thermal circuit — prevents recurrence if a failing component caused the fuse to blow
Compatible with Samsung DV, DVE, and DVG series dryers and Samsung-built Kenmore models
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
Set Part Number
XP8767
Condition
Aftermarket Replacement
Application
Samsung and Kenmore Gas and Electric Dryers
Set Includes
1x DC47-00018A High-Limit Thermostat, 1x DC96-00887C Thermal Fuse with Bracket, 1x DC47-00016A Thermal Fuse, 1x DC32-00007A Thermistor
DC47-00018A Rating
L260-50 — opens at 260°F (127°C), resets at 210°F (99°C) — auto-resets
DC96-00887C Trip Temp
320°F (160°C) — one-time, non-resettable
DC47-00016A
One-time thermal fuse on blower housing — non-resettable
DC32-00007A
Thermistor — resistance varies with temperature; communicates with control board
Compatible Brands
Samsung, Kenmore (Samsung-built)
Installation Notes
⚠️ Unplug Dryer and Shut Off Gas Before Starting Disconnect power (and shut off gas for gas dryers) before beginning. Remove the back panel of the dryer to access the heating element housing and exhaust duct. Take a photo of all wire connections before disconnecting anything — the thermistor and thermal fuses use similar small connectors and it is important to reconnect them to the correct terminals. The DC47-00018A high-limit thermostat is mounted on the heating element housing — unscrew and replace it. The DC96-00887C thermal fuse with bracket is mounted on the exhaust duct — unscrew, remove the bracket assembly, and install the new one. The DC47-00016A thermal fuse is on the blower housing — disconnect the wires and unscrew or unclip it. The DC32-00007A thermistor is clipped to the blower housing — pull the old one out and press the new one into the clip. Reconnect all wires, reassemble the back panel, restore power, and run a test cycle. Tip: Clean the full length of the exhaust duct before running the dryer after this repair. Tools needed: Phillips screwdriver, 1/4" nut driver, needle-nose pliers.
Frequently Asked Questions
What does each part in this set do?
The DC47-00018A high-limit thermostat monitors the heating element temperature and cuts power to the element at 260°F if the dryer gets too hot — it resets automatically when cooled. The DC96-00887C thermal fuse is a one-time safety device on the exhaust duct that permanently cuts power to the heat source at 320°F if the dryer overheats. The DC47-00016A is a second one-time thermal fuse on the blower housing that cuts power to the motor if overheating occurs there. The DC32-00007A thermistor monitors real-time drum temperature and sends resistance-based readings to the control board, which uses them to regulate the drying cycle and control the heating element.
What is the difference between DC96-00887A and DC96-00887C?
The DC96-00887C is the updated current part number that superseded the DC96-00887A. Both are the same thermal fuse with bracket used on the exhaust duct — the C suffix denotes a minor revision. Either part number is covered by this kit and both are fully interchangeable.
How do I test these parts with a multimeter?
Set the multimeter to continuity or resistance mode. At room temperature, the DC47-00018A high-limit thermostat and both thermal fuses (DC96-00887C and DC47-00016A) should all show closed continuity (near-zero resistance). Any of these that reads open (no continuity) has failed. The DC32-00007A thermistor should show a resistance reading at room temperature — typically around 10,000–50,000 ohms depending on ambient temperature — rather than zero or open. A thermistor that reads open or zero at room temperature has failed.
Why should I replace all four parts instead of just the one that failed?
When a thermal fuse blows in a Samsung dryer, it almost always means the dryer overheated — and that overheating event stresses all four thermal components simultaneously. Replacing just the blown fuse without replacing the other parts risks a repeat failure if the thermistor is providing incorrect readings or the high-limit thermostat is no longer protecting accurately. Replacing all four parts at once renews the entire thermal circuit and reduces the chance of a repeat failure in the near future.
Is this set for electric and gas Samsung dryers?
Yes — the XP8767 set is compatible with both electric (DVE series) and gas (DVG series) Samsung dryers that use these four thermal components. Always verify your specific model number before ordering to confirm all four parts apply to your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 3977394 Dryer Thermal Cut-Off Kit – Compatible with Whirlpool, Kenmore, Maytag, and KitchenAid Dryers
Product Description
Protect your dryer from overheating with the XPARTCO 3977394 Dryer Thermal Cut-Off Kit. This high-quality aftermarket replacement shuts off the heating element if the dryer temperature rises above safe operating limits. A failed cut-off can cause no-heat issues or overheating during drying cycles. Installing this reliable XPARTCO 3977394 kit restores safe temperature control and helps prevent damage to internal components.
Replaces Part Numbers
XPTC352, 3977394, 352F, EXPTC352
Compatibility
This replacement thermal cut-off kit fits select Whirlpool, Kenmore, Maytag, Roper, Estate, Crosley, and KitchenAid dryers.
Example compatible models include (but are not limited to): Whirlpool WED4815EW1, Kenmore 110.86573110, and Maytag MEDC215EW1.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM safety and temperature performance
🔥 Overheat Protection – Automatically shuts off power to the heating element if the dryer overheats
💰 Cost-Effective Fix – Affordable alternative to OEM thermal cut-off kits
🛠️ Easy Installation – Direct-fit design with included thermostats and connectors
🛡️ Fixes Common Issues – Solves dryer not heating, overheating, or shutting off prematurely
📐 Product Specification
Part Number: 3977394
Component Type: Dryer Thermal Cut-Off Kit
Includes: Thermal cut-off, high-limit thermostat, mounting hardware, and wire connectors
Temperature Rating: Cut-off opens at ~352°F.
Material: Metal thermostat housing and heat-resistant components
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Nut driver, Phillips screwdriver
⚠️ Safety First: Always unplug the dryer before performing any repairs to prevent electrical shock.
Steps:
Disconnect power and remove the rear dryer panel.
Locate the heating element housing and identify the cut-off and thermostat.
Disconnect wires and remove the old components.
Install the new 3977394 cut-off and thermostat in the same locations.
Reconnect wires, reassemble the back panel, and restore power.
Run a short test cycle to verify proper heating.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Keep your dryer safe and efficient — Add to Cart Now for a reliable, budget-friendly repair!
