XPARTCO 5304511335 Washer Water Level Pressure Switch – Compatible with Frigidaire & Electrolux Washers
Product Description
Restore accurate water level control and proper washer operation with the XPARTCO 5304511335 Washer Water Level Pressure Switch. It is responsible for detecting the water level inside the washer tub and ensuring accurate water level control during the wash cycle. It detects the pressure changes caused by the water level, allowing the washer to adjust the water intake accordingly.
A faulty pressure switch can cause overfilling, under-filling, or cycles not advancing properly. Replacing it with this reliable XPARTCO component helps ensure correct water levels and consistent wash performance.
XPARTCO provides cost-effective aftermarket appliance parts engineered to match original fit and function.
Replaces Part Numbers
5304511335, 4584277, EAP12176459, AFR17584, OEM18784872, PD00046588, AP6261621, PS12176459.
Compatibility
This replacement washer water level pressure switch fits select Frigidaire, Electrolux, Gibson, Crosley, and Kenmore (Frigidaire-manufactured) washers.
Common compatible models include (but are not limited to):
Frigidaire FFTW4120SW1, FFTW4120SW0, FFTW4120SW, FFTW4120SW0
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM fit and pressure sensing performance
💧 Accurate Water Level Detection – Ensures proper fill and cycle control
⚙️ Fixes Common Issues – Resolves overfill, underfill, and cycle errors
🧩 Direct-Fit Design – Installs easily with existing hose and wiring
💰 Cost-Effective Repair – Affordable alternative to OEM pressure switches
⚠️ Symptoms
If your washer is experiencing any of the following issues, this part may need replacement:
💧 Washer overfilling or underfilling
⚠️ Incorrect water levels during cycles
🔄 Cycle not advancing properly
🛑 Washer stops mid-cycle
🚫 No water or continuous filling
Replacing this pressure switch can restore proper water level control and washer performance.
📐 Product Specification
Part Number: 5304511335
Component Type: Washer Water Level Pressure Switch
Function: Detects water level and signals control board
Connection Type: Air hose + electrical connector
Application: Washer water level sensing system
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver
⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock.
Basic Steps:
Disconnect washer power.
Access the control panel or top panel.
Locate the pressure switch and disconnect the air hose and wiring.
Remove mounting screws and remove the old switch.
Install the new XPARTCO 5304511335 pressure switch.
Reconnect hose and wiring, reassemble, and restore power.
Run a test cycle to verify correct water levels.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore accurate water level control and reliable washer performance — Add to Cart Now for a dependable repair!
W11307244 Genuine OEM Washer Lid Lock Assembly for Whirlpool, Maytag, Kenmore, Amana
Fix your washing machine with the W11307244 Genuine OEM Lid Lock Assembly, designed for top-loading washers from trusted brands like Whirlpool, Maytag, Kenmore, Amana, Crosley, and more. Ensure safety and seamless operation with this high-quality, manufacturer-approved replacement part. Fix issues like a washer that won’t start, stops mid-cycle, or displays lid lock errors with this reliable solution.
Product Features
🔒 Genuine OEM Quality: Engineered by Whirlpool for perfect compatibility and long-lasting performance.
🔄 Universal Fit: Replaces part numbers W10682535, W10838613, W10838613VP, W11253733. Compatible with models like Whirlpool WTW5000DW1, Maytag MVWC565FW1, Amana NTW4516FW0, Kenmore 110.2024251, and more (verify with your model number).
🛠️ Easy Installation: Comes with a 3-wire harness for quick setup. Basic tools (screwdriver, putty knife, wrench) needed for DIY repair.
✅ Enhanced Safety: Securely locks the washer lid during cycles to prevent accidents and ensure smooth operation.
Why Choose This Lid Lock Assembly?
The W11307244 is the ideal solution for common washer issues like:
🚫 Washer failing to start or fill.
🔴 Lid not locking properly, triggering error codes.
⏸️ Machine pausing mid-cycle or during spin.
⚙️ Inconsistent agitation or cycle completion.
Unlike generic alternatives, this OEM part guarantees precise fit and durability, saving you time and money on repairs.
Compatibility
Fits a wide range of top-load washing machines, including:
Whirlpool: WTW5000DW1, MVWX655DW1
Maytag: MVWC565FW1, ATW4516HW0
Amana: NTW4516FW0
Kenmore: 110.2024251
Crosley, Roper, Inglis: Various models (check your manual for compatibility).
Pro Tip: Confirm your washer’s model number to ensure a perfect fit. Contact us for help verifying compatibility!
Installation Guide
🔌 Unplug the washer and turn off the water supply for safety.
🔧 Use a putty knife to release clips and lift the top panel.
🔌 Disconnect the old harness and remove the faulty lock.
🔩 Install the W11307244 assembly, ensuring proper alignment of the bezel.
✅ Reconnect the harness, reassemble, and test the lock before full use.
Note: The part may arrive locked; manually unlock it during installation. Watch our installation video for step-by-step guidance.
Why Shop With Us?
🚚 Fast, Free Shipping: Same-day dispatch on orders before 2 PM EST.
😊 100% Satisfaction Guarantee: 30-day hassle-free returns.
🧑🔧 Expert Support: Our team is here to assist with compatibility and installation questions.
💸 Competitive Pricing: Get OEM quality at an affordable price.
Customer Reviews
⭐⭐⭐⭐⭐ "Fixed my Whirlpool washer in 20 minutes! Easy to install and works perfectly." – Sarah T.⭐⭐⭐⭐⭐ "OEM part made all the difference. My Maytag is back to normal!" – John R.⭐⭐⭐⭐ "Arrived quickly, but needed to unlock it before install. Great product!" – Lisa M.
Add to Cart Now!
Don’t let a faulty lid lock disrupt your laundry routine. Order the W11307244 Genuine OEM Lid Lock Assembly today and restore your washer’s performance. Limited stock—grab yours now!
XPARTCO DA31-00342A Refrigerator Evaporator Fan Motor - Compatible with Samsung Refrigerators
Product Description
Restore optimal cooling in your refrigerator with the replacement DA31-00342A Refrigerator Evaporator Fan Motor. This high-quality replacement evaporator fan motor, designed for Samsung refrigerators, circulates chilled air through the fresh food and freezer compartments to maintain even temperatures. Constructed from durable plastic with sticky insulation and a silent sponge for quiet operation, this DC motor (12V, 4.2W, 0.35A, 1850 RPM) addresses issues like temperature fluctuations, frost buildup, or noisy operation.
Note: Includes one evaporator fan motor with 3-pin connector and 60cm wire;. Disconnect power before installation.
Replaces part numbers: DA31-00342A, EAP12590899, 4982090, ARES2130RA, PD00080451, EAP12590899, AP6803165, PS12590899
Compatibility:
Compatible with models including but not limited to:
Samsung: DA31-00342A Refrigerator FAN is the correct replacement for model numbers. RM80F22WEWAA RM70F22NERAA RM80F23VMRAA RF32CG5B10SRAA RF27CG5B10SRAA DRZ30980RAP/DA DRZ30980LAP/DA DRZ36980RAP/DA DRZ36980LAP/DA RQ48T9432T1/AA RS28A5F61SG/AA RS27T5202SR/AA RQ48T94B277/AA RS28A500ASR/AA RS28A500ASG/AA RS22T5561SR/AA RF32CG5N10SRAA RS27T5200WW/AA RS23A500ASG/AA RS28A5F61SR/AA RF32CG5900MTAC RS23CB7600QLAA RF32CG5900SRAA RF27CG5900SRAA RF32CG5100SRAA RF26CG7400SRAA RF27CG5400SRAA RF32CG5400MTAA RF31CG7400MTAA RF27CG5100SRAA RS23CB760012AA RF31CG7200SRAA RF32CG5100MTAA RF27CG5010S9AA RF32CG5400SRAA RF32CG5300SRAA RS28CB7600QLAA RS28CB760012AA RF31CG7400SRAA RF31CG7220SRAA DRZ36980RAP/DA DRZ30990LAP/DA DRZ30980RAP/DA DRZ36980LAP/DA DRZ30990RAP/DA DRZ30980LAP/DA RS22T5561SG/AA RS27T5561SG/AA RS23A500ASR/AA RS27T5561SR/AA RS27T5201SR/AA RS27T5200SR/AA RS22T5561SR RS27T5200SG/AA RS22T5201SR/AA
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung refrigerator models.
🔥 Specifications: replacement evaporator fan motor, DC 12V, 4.2W, 0.35A, 1850 RPM, 3-pin connector, 60cm/23.62" wire length, 5.3" fan diameter, plastic construction with sticky insulation and silent sponge for quiet operation.
💰 Cost-Effective Alternative: replacement motor offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires a Phillips screwdriver, work gloves; typically installed in 30–60 minutes.
🛡️ Reliable Fixes: Resolves poor cooling, frost buildup, noisy operation (grinding or buzzing), or evaporator coil freezing.
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your refrigerator cooling efficiently today!
Add to cart now for a budget-friendly fix!
Genuine OEM WH08X37938 Washer Lid Switch Assembly
The WH08X37938 is a genuine OEM lid switch (lid lock) assembly from GE for GE and Hotpoint top-load washers, also used on select Kenmore models. The assembly locks the lid while the washer is running and releases it when the cycle ends, and it tells the control board the lid is closed and it's safe to run. When it wears out, cracks, or fails electrically, the washer may refuse to start, stop in the middle of a cycle, show a lid or door lock error, or fail to lock the lid at all.
This assembly replaces the original lock and switch as a unit, so you do not have to diagnose which internal contact has failed. As a genuine OEM part, not an aftermarket equivalent, it matches the original factory fit and specification. It mounts on the washer cabinet with an electrical connector and is a straightforward repair, usually done in under an hour.
Quick Answer
The Genuine OEM WH08X37938 Lid Switch Assembly fixes a GE or Hotpoint top-load washer that won't start, stops mid-cycle, won't lock the lid, or shows a lid or door lock error because the lid lock is worn or has failed. Complete replacement lock and switch assembly, genuine OEM. Classic symptom: you close the lid and nothing happens, or the washer starts then stops and signals a lid or lock fault.
Common Problems This Part Fixes
Washer won't start when the lid is closed
Washer stops partway through the wash, rinse, or spin
Lid will not lock, or stays locked after the cycle ends
Lid or door lock error codes
Loose, cracked, or visibly damaged lid lock
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This lid switch assembly replaces the following part numbers:
WH08X37938, WH08X32697, WH02X24399, WH08X32657, WH01X26694, WH01X24112, WH01X24114, WH01X26114, WH01X27954, WH08X31577, WH08X31222, 290D1580P001, 290D1580P002, 290D1580P003, 290D1580P004, 290D3070P001, EG-380843 M, AGE26076, AP7225583, EAP17626546, OEM21676758, PD00087323, PS17626546
These are earlier GE numbers for the lid lock, as the part was updated over time. If your old lock or parts diagram shows any of them, match against this list.
Compatibility
This assembly is listed for select top-load washers from:
GE and Hotpoint, including GTUN275EM0WW, GTUN275GM0WW, GTUP240EM0WW, and GTUP240EM2WW
Kenmore, including 363.71542211, 363.71542310, and 363.71542410
Note: The model list above is only a sample, and lid locks differ between GE washer generations. Confirm fit by matching the number on your old lock or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order. This part is for top-load washers.
Key Features
Genuine OEM GE lid switch (lid lock) assembly, not an aftermarket equivalent
Replaces the lock and switch as a unit, with no need to find the failed contact
Restores starting, locking, and unlocking at the end of the cycle
Cross-references to WH08X32697, WH08X31577, and other earlier GE numbers
Fits select GE, Hotpoint, and Kenmore top-load washers
Mounts on the cabinet with a plug-in electrical connector
Product Specifications
Part Number
WH08X37938
OEM Part Number
WH08X37938
Part Type
Washer Lid Switch (Lid Lock) Assembly
Condition
Genuine OEM
Application
Select GE, Hotpoint & Kenmore Top-Load Washers
Installation Notes
⚠️ Unplug Power and Shut Off Water Unplug the washer and turn off the water supply before starting. Work gloves are recommended. Open the lid and, following your model's service guide, remove the top panel or cabinet section to reach the lid lock mounted on the cabinet. Note the position of the old assembly, disconnect its wiring connector, and remove the screws holding it in place. Fit the new assembly in the same position, secure it, and reconnect the connector. Reassemble the washer, restore power and water, and run a short cycle to confirm the lid locks, the washer starts, and the lid releases at the end.
Frequently Asked Questions
My washer won't start with the lid closed. Is this the part I need?
A failed lid lock is a common cause. The control board won't start a cycle unless it sees the lid is closed and locked. Check that the lid closes fully and that nothing is blocking it. If it still won't start, the lid lock is a likely cause.
Is a lid switch the same as a lid lock?
On these washers, the lid switch and lock are combined in one assembly, which this part replaces.
My old part is marked WH08X32697 or WH08X31577. Will this work?
Those numbers are on the Replaces list. Compare the connector and mounting against your old part, or contact our support team with your model number and we'll confirm.
Will this fit my front-load washer?
No. This is for top-load washers.
Is this an OEM part?
Yes. This is a genuine OEM GE part, not an aftermarket equivalent, so it matches the original factory fit and specification.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DG34-00027B Range Membrane Switch (Touchpad)
The XPARTCO DG34-00027B is an aftermarket replacement membrane switch touchpad for Samsung gas ranges. This is the keypad panel itself — the physical layer of touch-sensitive buttons you press to select temperature, set the time, and choose a cooking mode. Underneath a thin, durable overlay, this membrane switch reads each button press as a distinct signal and passes it along to the range's main control board, which then acts on the command. Unlike the main control board, this component doesn't process or execute anything on its own — it's purely the interface between your finger and the board.
Because of that division of labor, a failing membrane switch produces a very specific pattern that's easy to distinguish from a control board failure: certain buttons stop responding, specific functions become impossible to select, or particular settings can no longer be adjusted, while the rest of the panel — including the clock, display, and other buttons — continues working normally. If instead the entire display goes blank or the whole panel stops responding at once, that points to the main control board rather than this touchpad. It directly replaces DG34-00027A, AP5986689, and PS11735749.
Quick Answer
The XPARTCO DG34-00027B Range Membrane Switch (Touchpad) fixes Samsung gas ranges where certain buttons don't respond, specific functions can't be selected, or particular settings won't adjust — while the rest of the control panel, including the clock and display, still works normally. Replaces DG34-00027A, AP5986689, PS11735749. If the entire display is blank or completely unresponsive, or the clock works but no heating functions operate at all, the problem is more likely the main control board (such as our DE92-02588G listing) rather than this touchpad.
Common Problems This Part Fixes
Certain buttons on the control panel don't respond when pressed
Specific cooking functions or modes can't be selected
Particular temperature or time settings can't be adjusted
Some buttons work fine while others are unresponsive or intermittent
Touchpad feels unresponsive or requires repeated presses to register
Visible wear, cracking, or bubbling on the touchpad overlay surface
Buttons that used to work reliably have become inconsistent over time
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This range membrane switch touchpad directly replaces the following OEM and cross-reference part numbers:
DG34-00027B, DG34-00027A, AP5986689, ASM912846, EAP11735749, PD00027535, PS11735749
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This membrane switch touchpad is compatible with select Samsung gas ranges, including model numbers such as:
NX58H5600SS
NX58J5600SG
NX58F5700WS
NX58M5600SB
Note: Samsung uses several similarly-numbered membrane switch touchpads across its range lineup — including DG34-00025A (for NX58F5300SS/NX58F5500SS/NX58F5500SB), DG34-00020A (for NE594R0/NE59J3420/NE59J3421), and DG96-00850H (for NE63A6511) — each for different model groups and not interchangeable with this one. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which touchpad fits your range.
Key Features
Aftermarket replacement membrane switch touchpad — the touch-sensitive keypad interface for the control panel
Resolves "certain buttons unresponsive," "can't select specific functions," and "settings won't adjust" symptoms caused by a worn or damaged membrane
Durable overlay material designed for long-term wear resistance
Smooth surface that's easy to clean and maintain
Direct drop-in replacement — matches the original control panel mounting
Replaces DG34-00027A, AP5986689, and PS11735749
Aftermarket replacement built to OEM-equivalent quality standards
Straightforward DIY repair with basic tools
Product Specifications
Part Number
XPDG34-00027B
OEM Part Number
DG34-00027B (also DG34-00027A)
Part Type
Range Membrane Switch (Touchpad)
Condition
Aftermarket Replacement
Application
Gas Ranges
Color
Black
Function
Touch-sensitive keypad interface; passes button signals to the main control board
Quantity
1 membrane switch touchpad
Compatible Brand
Samsung
Installation Notes
⚠️ Unplug Range Or Shut Off Breaker Before Starting — Small Parts, Keep Away From Children Unplug the range or shut off the house circuit breaker before beginning to avoid electrical hazards. Wear work gloves. This part includes small components — keep them away from young children during installation. Access is typically through the front of the control panel: remove the screws or clips securing the panel trim, then carefully separate the old touchpad overlay from its mounting surface, since some models use an adhesive backing that may require gentle, even pressure to release cleanly without damaging the surrounding panel. Photograph the ribbon cable or connector routing before disconnecting anything. Disconnect the touchpad's ribbon cable or connector from the control board, and remove the old membrane switch fully. Position the new DG34-00027B so its buttons align correctly with the control panel cutout, press it into place evenly to seat any adhesive backing, and reconnect the ribbon cable or connector to the control board. Reinstall the panel trim and its screws or clips. Restore power and test every button on the touchpad to confirm each one now responds correctly. Tools needed: Phillips or flat-blade screwdriver (model-dependent), work gloves.
Frequently Asked Questions
Some buttons work but others don't. Is this the right part?
Yes, this is the classic symptom this touchpad addresses. Because the membrane switch is purely the physical button interface, individual sections of it can wear out or fail independently, leaving some buttons responsive while others stop working. If your clock, display, and some functions still work normally but specific buttons or settings don't respond, this touchpad — not the main control board — is the most likely cause.
My whole display is blank and nothing on the panel responds. Do I need this part?
Probably not. A completely blank or entirely unresponsive display points to the main control board rather than this touchpad, since the touchpad itself has no display and can't cause a total blackout on its own. Similarly, if your clock and timer work but no oven heating functions operate at all, that's also a control board symptom. This touchpad is the correct part specifically when some buttons or functions fail while the rest of the panel, including the display, continues working.
How do I know which specific membrane switch touchpad my range needs?
Samsung uses several different touchpads that look similar but serve different model groups — always check your full model number before ordering. This DG34-00027B fits NX58H5600SS, NX58J5600SG, NX58F5700WS, and NX58M5600SB specifically; other Samsung ranges use different part numbers such as DG34-00025A, DG34-00020A, or DG96-00850H. Contact our support team with your model number if you want to confirm before ordering.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the button layout, overlay material, and mounting configuration of the original DG34-00027B touchpad used in compatible Samsung gas ranges.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
ERP DA31-00020E Refrigerator Evaporator Motor
Replaces Part Numbers: DA31-00020E, 2030081, DA31-00020E-, AP4136543, PS4138293.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
6601EN1003D Washer Door Lock Interlock Switch
Replaces Part Numbers: 6601EN1003D, 6601ER1005A, 2651099, AH3636296, AP5594317, EA3636296, PS3636296.
This is an aftermarket part that can be used as a replacement for the OEM part.
WARNING: California’s Proposition 65 (California Residents Only)
4TM-B12 Refrigerator / Freezer Compressor Overload 1/2 HP
Refrigerator / Freezer Thermal Overload Protector
1/2 HP (375W) - 110V
4TM-B
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO DA61-03734A Refrigerator Door Handle Fastener
Cross Reference Information: DA61-03734A, DA61-11161A, AP6286751, AP4372038, PS4144145.
Description: This Refrigerator Handle Mounting Stud is essential for securing your refrigerator's handle firmly in place. This replacement part ensures a perfect fit for select Samsung refrigerator models, maintaining the integrity and functionality of your appliance. Crafted from durable materials, the handle mounting stud provides reliable support, preventing the handle from becoming loose or detached over time. Installation is straightforward, allowing you to replace the old or damaged stud with ease and restore your refrigerator's appearance and usability quickly.
WR60X25858 Freezer Genuine OEM Evaporator Fan Motor
The WR60X25858 is a genuine GE OEM freezer evaporator fan motor for GE refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, Profile, and Kenmore models. Located in the freezer compartment, this motor circulates air across the evaporator coil and out into the freezer and, on many models, the fresh food compartment, drawing heat out of the air to maintain consistent, efficient cooling throughout the appliance.
Rated 13.6V DC, 0.23 amps, with fan dimensions of approximately 4.5" x 4.5" and a wiring harness and plug extending about 8.25" from the frame. Common causes of failure include worn motor bearings or electrical failure over time. Symptoms of a failing evaporator fan motor include the freezer failing to cool properly and warming up, insufficient airflow, excessive frost buildup, higher-than-normal freezer temperatures, or unusual noise — often caused by frost or ice rubbing against the fan blade as it turns. It directly replaces 239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431.
Quick Answer
The WR60X25858 Freezer Genuine OEM Evaporator Fan Motor fixes GE, Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators with a freezer that's warming up, insufficient airflow, excessive frost, or unusual noise from the fan area. 13.6V DC, 0.23A, ~4.5" x 4.5", 8.25" harness. Replaces 239D1371P002, 3033253, 4931166, AP5669723, AP6891698, EAP12727431, EAP7320382, PS12727431, PS7320382, U11P14MS7AA3-57A61, WR60X10340, AGE29632. If your freezer isn't cold, check the evaporator fan first — but while you're in there, cleaning frost or ice off the fan blade and vacuuming the condenser coils are worthwhile companion steps.
Common Problems This Part Fixes
Freezer not cooling properly, warming up
Insufficient airflow through the freezer compartment
Excessive frost buildup
Higher-than-normal freezer temperatures
Unusual noise from the fan area, including frost or ice rubbing on the blade
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This freezer evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators built on the GE platform, including model numbers such as DFE29JSDFSS and DFE29JGDAWW.
Note: GE uses several different evaporator fan motors across its refrigerator lineup, including WR60X26866 and WR60X26033 for other models. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which motor your refrigerator needs.
Key Features
Genuine GE OEM part — factory-specified motor design and airflow rating
Circulates air across the evaporator coil to draw heat out and cool the freezer
Resolves "freezer warming up," "insufficient airflow," "excessive frost," and "unusual noise" symptoms
Rated 13.6V DC, 0.23 amps
Approximately 4.5" x 4.5", with an 8.25" wiring harness and plug
Direct drop-in replacement matching the original mounting and connections
Replaces 239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431
Compatible with GE, Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
DIY-friendly repair, typically 15 to 30 minutes
Product Specifications
Part Number
WR60X25858
Part Type
Freezer Evaporator Fan Motor
Condition
Genuine OEM
Brand
GE
Location
Freezer compartment
Voltage
13.6V DC
Amperage
0.23 A
Fan Dimensions
Approx. 4.5" x 4.5"
Harness/Plug Length
Approx. 8.25" from frame
Repair Difficulty
Easy — 15 to 30 minutes
Quantity
1 fan motor
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café, Profile, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Clear Any Frost Or Ice From The Fan Area Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Locate the evaporator fan motor in the freezer compartment, typically behind an interior panel covering the evaporator coil assembly. If there's noticeable frost or ice buildup around the fan or coil, allow it to fully defrost before continuing — restricted airflow from ice is a common contributor to fan motor strain and noise. Remove the panel to access the fan motor, then disconnect the wiring harness from the old motor. Remove the mounting screws or clips securing the old motor and pull it free, along with the fan blade if it doesn't transfer separately. Install the new WR60X25858 in the same position, reconnect the wiring harness fully, and secure the mounting hardware. Reinstall the interior panel. While you're in this area, vacuuming out any accessible condenser coils is a good complementary maintenance step. Restore power and monitor the freezer's temperature over the next 24 hours to confirm normal, quiet operation and consistent cooling. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My freezer isn't cold anymore. Is this the part I need?
Yes, this is one of the most common causes of a freezer that won't cool. One customer specifically reached out after their freezer wasn't cold, watched a diagnostic video explaining the evaporator fan's role, and confirmed this motor was the cause before ordering the replacement.
I hear a strange noise from inside my freezer. Could this be the fan motor?
Yes, this is a well-documented symptom. Noise often occurs when the fan motor itself is wearing out, or when frost or ice has built up enough to rub against the spinning fan blade. Clearing any ice buildup before replacing the motor helps you confirm whether the noise was from ice contact or the motor itself.
Should I do anything else while I have the freezer open for this repair?
It's a good opportunity to check for and clear any frost or ice buildup around the fan and coil area, since restricted airflow can contribute to fan strain. One customer also vacuumed out the condenser coils during the same repair, which is a reasonable companion maintenance step while everything is accessible.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original motor design, voltage, and connection type of the evaporator fan motor originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DC96-01703G Washer Water Level Pressure Switch - Compatible with Samsung Washers
Product Description
Ensure accurate water level control in your washer with the replacement XPARTCO DC96-01703G Washer Water Level Pressure Switch. This replacement pressure switch is designed for select Samsung front-load and top-load washers, sensing and controlling water levels for optimal washing performance. It addresses issues like incorrect water levels, not filling, or error codes (e.g., E6 FA), offering a cost-effective alternative to OEM parts.
Note: Includes one water level pressure switch. Disconnect power and water supply before installation. Verify compatibility with your washer model.
Replaces part numbers: DC96-01703G, PD00026135, EAP4217083, AP5623035, PS4217083.
Compatibility:
Compatible with models including but not limited to:
Samsung: WF42H5000AW/A2, WF42H5200AP/A2, WF42H5400AF/A2, WF45K6200AW/A2, WF45K6500AW/A2, WF45M5500AP/A5, WF45M5500AZ/A5, WF50K7500AV/A2, WF50K7500AW/A2, WF56H9100AG/A2, WF56H9110CW/A2, WF457ARGSG, WW22K6800AW/A2, WV55M9600AW/A5, WV60M9900AV/A5, WD10J6410AW/ZS
Other brands: Select models requiring DC96-01703G
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung front-load and top-load washers requiring DC96-01703G.
🔥 Specifications: Precision-engineered water level pressure switch with 28" air pressure hose, designed for accurate water level sensing and control.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, work gloves; typically installed in 10–15 minutes.
🛡️ Effective Fixes: Resolves issues like incorrect water levels, not filling, motor idling, or error codes (e.g., E6 FA).
Product Specification
Part Number: XPDC96-01703G
Component Type: Washer water level pressure switch
Material: Durable plastic housing with metal contacts
Terminal Type: Electrical connector.
Operating Conditions: Suitable for high-humidity washer environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the washer from the power source and water supply before installation.
Tools Needed: Phillips screwdriver, work gloves.
Process: Access the switch by removing the top or back panel of the washer, disconnect the old switch’s wiring and hose, install the new switch, and reconnect wiring and hose. Ensure secure connections and test for proper operation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your washer running efficiently today!
Add to cart now for a budget-friendly fix!
