XPARTCO DD94-01002A Dishwasher Mounting Installation Kit for Samsung.
High-quality dishwasher mounting installation kit designed to help secure compatible dishwashers properly during installation.
✓ Dishwasher Installation Part ✓ Replaces DD94-01002A ✓ Compatibility Support
Product Description
The XPARTCO DD94-01002A Dishwasher Mounting Installation Kit is used to help secure compatible dishwashers during installation. Proper mounting helps keep the dishwasher stable, aligned, and safely positioned under the countertop or cabinet opening.
Replacing missing, damaged, or worn mounting hardware can help restore a secure dishwasher installation and prevent unwanted movement during use.
Quick Answer
If your dishwasher is loose, shifting, not secured under the counter, or missing mounting hardware, the DD94-01002A dishwasher mounting installation kit may be needed.
⚠️ Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Dishwasher not secured properly
Missing dishwasher mounting hardware
Dishwasher shifting during use
Loose dishwasher installation
Damaged or worn mounting brackets
Replaces part Number
DD94-01002A, 2077601, AP4450818, ASM941007, PD00007402, EAP4222710, PS4222710.
Compatibility
This part fits select Samsung and compatible dishwasher models using part number DD94-01002A.
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Dishwasher mounting installation kit
Helps secure dishwasher in place
Supports proper dishwasher alignment
Designed for compatible dishwasher models
Quality aftermarket replacement part
Product Specifications
Brand
XPARTCO
Part Type
Dishwasher Mounting Installation Kit
Primary Part Number
DD94-01002A
Compatible Appliance Type
Dishwasher
Condition
New
Installation
Disconnect power before installation. Follow the dishwasher installation instructions and verify the unit is level, aligned, and securely mounted before use.
Troubleshooting Guide
⚠️ Disconnect power before servicing or installing the dishwasher.
Check if the dishwasher is level and properly aligned.
Inspect mounting brackets and screws for damage or missing hardware.
Confirm the dishwasher does not shift when the door is opened or closed.
Replace the mounting kit if hardware is missing, damaged, or no longer secure.
When Should You Replace This Part?
Replace the dishwasher mounting installation kit if the dishwasher is loose, shifting, not properly secured, or if the original mounting hardware is missing or damaged.
Shop With Confidence
We are a U.S.-based appliance parts retailer specializing in high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse.
✓ Fast Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
```
XPARTCO W10828351 Dryer Lint Screen with Cover
Replaces Part Numbers: W10828351, 8531964, 8531967, W10812395, 348399, 348400, 4338557, 685273, ER8531964, TJDE964, W10828351VP, AP5985829, PS11726200.
Description: This Lint Screen Cover and Filter is a replacement part for specific whirlpool, Kenmore Laundry Center dryer models. It serves a dual purpose: the lint screen traps lint and debris from clothes during the drying process, preventing them from clogging the dryer vent, while the cover ensures the lint screen is securely positioned and contributes to optimal airflow within the dryer. Common causes of a bad part include tears or holes in the lint screen that allow lint to pass through and clog the vent, a cracked or broken cover that fails to secure the lint screen properly, or buildup of fabric softener and lint that reduces the effectiveness of the filter.
🧺 W10828351 Dryer Lint Screen with Cover –
Restore airflow and improve dryer efficiency with this high-quality aftermarket replacement for part W10828351. This lint screen with integrated cover is designed to match the performance and fit of the original—at a more affordable price.
Ideal for dryers experiencing long dry times, overheating, or lint leakage, this easy-to-install replacement helps protect your appliance and your home.
✅ Product Highlights:
Aftermarket Replacement for W10828351 – Compatible with OEM design and specs
2-in-1 Design – Includes both lint screen and cover assembly
Improves Dryer Airflow – Helps reduce dry times and wear on clothes
Durable & Washable – Built for repeated use and easy cleaning
Tool-Free Installation – Snaps right into place in seconds
🔧 Fixes Common Dryer Problems:
Long drying cycles
Visible lint inside dryer or vent
Damaged, warped, or missing lint screen
Excessive heat or potential fire hazard
💡 Why Choose Parts-O-Matic?We provide trusted aftermarket and OEM parts at unbeatable prices. Every part we list is carefully sourced for performance, fit, and value—plus fast shipping and helpful support from real appliance pros.
🔁 Compatible with Part Numbers:
Replaces OEM #W10828351, 8531964, 8531967, W10812395, 348399, 348400, 4338557, 685273, ER8531964, TJDE964, W10828351VP, AP5985829, PS11726200.
🧰 Fits specific Laundry Center Models From:
Whirlpool
Kenmore
Need help confirming model compatibility? Contact us—we’re here to help you get the right fit the first time.
XPARTCO 691366 Dryer Idler Pulley Assembly Replaces WP691366
The XPARTCO 691366 is an aftermarket replacement dryer idler pulley assembly compatible with a wide range of Whirlpool-family dryers — particularly models with the lint filter on top — including Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Crosley, Estate, Inglis, Admiral, Magic Chef, and Norge. The idler pulley assembly is a spring-tensioned arm and wheel that presses against the drum drive belt to maintain correct belt tension as it wraps around the drum and motor pulley. Without proper tension, the belt slips off the motor pulley, causing the drum to stop spinning. A worn idler pulley bearing also causes squealing, squeaking, or thumping noises during operation.
This is a complete idler arm and pulley assembly — it includes both the spring arm and the wheel, and mounts directly to the existing bracket in the dryer. Overall dimensions are 6"L x 1-5/8"W x 3-7/8"H with a 1-7/8" diameter pulley wheel. It replaces older Teflon friction-style idler pulleys and provides a smoother, longer-lasting ball-bearing wheel. It directly replaces WP691366, 691366, 239477, 337116, 337407, 3394332, 347034, 347226, 4319391, 688166, W10612905, AP6010582, PS11743765, and over 20 additional cross-reference numbers. Often replaced together with the drum belt (341241) and drum support rollers (349241T) as the 4392065 maintenance kit. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO 691366 Dryer Idler Pulley Assembly fixes Whirlpool-family dryers that are squealing, thumping, or where the drum stops spinning because the belt has lost tension. Complete arm and pulley assembly. 6"L x 1-5/8"W x 3-7/8"H overall, 1-7/8" pulley diameter. Replaces older Teflon friction pulleys with ball-bearing wheel. Compatible with Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, and more. Replaces WP691366, 239477, 337116, 3394332, 347034, AP6010582, PS11743765. Often replaced with 341241 belt and 349241T rollers.
Common Problems This Part Fixes
Drum not spinning — belt has lost tension and slipped off the motor pulley
Loud squealing or squeaking noise during the drying cycle — worn idler pulley bearing
Thumping or clunking noise as the pulley wheel wobbles on a worn bearing
Belt repeatedly slipping or falling off after being reinstalled
Grinding noise from the idler pulley area — bearing fully failed
Dryer drum spinning intermittently due to inconsistent belt tension
Idler pulley arm visibly cracked, broken, or wheel no longer spinning freely
Replaces Part Numbers
This idler pulley assembly directly replaces the following OEM and cross-reference part numbers:
WP691366, 691366, 239477, 26000691366, 337116, 337407, 337510, 3388345, 338946, 3394332, 347034, 347226, 347277, 4319391, 688166, 691366BULK, 8207, 99989677, DE412, K35-163, W10612905, WP691366VP, AWP48059, EAP11743765, AP6010582, PD00002256, PS11743765.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This idler pulley assembly is compatible with select gas and electric dryers from the following brands — particularly models with the lint filter on top:
Whirlpool dryers (gas and electric — WED, WGD, LE, LG, and related series with top lint filter)
Kenmore / Sears dryers (Whirlpool-built models)
Maytag dryers (gas and electric)
Amana dryers
KitchenAid dryers
Roper dryers
Crosley dryers
Estate dryers
Inglis dryers
Admiral dryers
Magic Chef dryers
Norge dryers
Note: The 691366 idler pulley is for older Whirlpool-family dryers with the lint filter on top. Newer Whirlpool dryers with the lint screen inside the door use the W10837240 idler pulley arm assembly instead. Always verify your model number before ordering.
Key Features
Complete idler arm and pulley assembly — includes both the spring-tensioned arm and the pulley wheel
Maintains correct drive belt tension so the belt grips the drum and motor pulley without slipping
Redesigned ball-bearing pulley wheel replaces older Teflon friction-style pulleys for longer service life and quieter operation
Overall dimensions: 6"L x 1-5/8"W x 3-7/8"H; pulley wheel diameter: 1-7/8"
Plastic arm with metal shaft and ball-bearing pulley wheel
Replaces WP691366, 239477, 337116, 3394332, 347034, AP6010582, and over 30 additional cross-reference numbers
Compatible with 12 major appliance brands on the Whirlpool top-lint-filter platform
Often replaced together with the drum belt (341241) and drum rollers (349241T) — all three included in the 4392065 maintenance kit
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
691366
OEM Part Number
WP691366
Part Type
Dryer Idler Pulley Assembly (Arm and Wheel)
Condition
Aftermarket Replacement
Application
Gas and Electric Dryers (lint filter on top models)
Overall Dimensions
6"L x 1-5/8"W x 3-7/8"H
Pulley Wheel Diameter
1-7/8 inches
Material
Plastic arm / Metal shaft / Ball-bearing pulley wheel
Color
Black / White
Includes
Complete idler arm and pulley assembly
Often Replaced With
341241 Drum Belt, 349241T Drum Rollers (4392065 kit)
Compatible Brands
Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Crosley, Estate, Inglis, Admiral, Magic Chef, Norge
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power (and shut off gas for gas dryers) before beginning. Remove the lint screen and unscrew the screws inside the lint screen housing. Use a putty knife to release the top panel spring clips and lift the top panel. Remove the front panel to fully access the drum drive components. Release belt tension by pushing the idler pulley arm toward the motor and sliding the belt off. Note how the belt is routed before removing — take a photo. Unclip or unscrew the old idler pulley assembly from its mounting bracket. Install the new 691366 idler pulley in the same position. Re-route the belt around the drum (ribbed side in), under the idler pulley, and around the motor pulley, then release the idler arm to create tension. Reassemble the front and top panels, restore power, and run a test cycle. Tip: while the dryer is open, inspect and replace the drum belt (341241) and drum support rollers (349241T) if worn. Tools needed: Phillips screwdriver, 1/4" or 5/16" nut driver, putty knife.
Frequently Asked Questions
What does the idler pulley do?
The idler pulley is a spring-loaded arm and wheel assembly that presses against the drive belt between the drum and the motor pulley, keeping the belt under constant tension. This tension is what allows the belt to grip both the drum and the motor pulley without slipping as the motor spins. Without proper tension — or with a pulley bearing that has failed — the belt slips, the drum stops spinning, and the dryer produces heat but does not tumble clothes. A worn bearing also creates the high-pitched squealing sound that is the most common sign of idler pulley failure.
What is the difference between 691366 and WP691366?
These are the same idler pulley assembly. WP691366 is the updated Whirlpool OEM part number that superseded the original 691366. The W10612905 is also a cross-reference for the same assembly. This aftermarket replacement is compatible with all three numbers.
What is the difference between 691366 and W10837240?
Both are Whirlpool dryer idler pulley assemblies, but for different dryer generations. The 691366 (WP691366) is used on older Whirlpool-family dryers with the lint filter on top of the dryer. The W10837240 is a larger, redesigned idler arm and bracket assembly used on newer Whirlpool-family dryers with the lint screen inside the door. They are not interchangeable. Always verify your model number to confirm which idler pulley is correct for your dryer.
Should I also replace the belt and drum rollers at the same time?
Yes — since the dryer must be disassembled to replace the idler pulley, this is the ideal time to also inspect and replace the drum belt (341241) and rear drum support rollers (349241T). All three parts are part of the same drum drive system and wear at similar rates. The 4392065 maintenance kit includes all three together and is the recommended approach for a complete drum drive repair — one teardown covers everything.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from durable plastic and metal with a ball-bearing pulley wheel to match the dimensions and performance of the original WP691366 idler pulley assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM W11517331 Electric Range Surface Burner Control Knob
The Genuine OEM Whirlpool W11517331 is the surface burner control knob for select Whirlpool electric ranges. It mounts on the front panel and turns the burner on and off and adjusts the heat setting. Knobs wear out with age or get damaged, and a cracked, broken, loose or stripped knob, or one with the markings worn off, is the usual reason to replace it.
This is the original Whirlpool part, not an aftermarket equivalent. It is sold individually, one knob per order. Check your model number before ordering, because Whirlpool uses similar knobs in other finishes.
Quick Answer
The Genuine OEM W11517331 Surface Burner Control Knob replaces a worn or damaged burner knob on a compatible Whirlpool electric range. Replaces W10850027, W11117415 and W11458840. Classic symptoms: the knob is cracked, broken, loose or stripped, or the burner doesn't respond when you turn it.
Common Problems This Part Fixes
Cracked or broken knob
Knob stripped inside, so it spins without turning the burner control
Loose, misaligned or hard-to-turn knob
Knob markings worn off
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This burner control knob replaces or supersedes the following part numbers:
W11517331, W10850027, W11117415, W11458840, AP7002931, AWP46013, EAP16543518, PD00065443, PS16543518
If your old knob shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This burner control knob is listed for Whirlpool electric ranges, including these examples:
Whirlpool WEC310S0LS0, WEC310S0LS1, WEC310S0LS2, WEC310S0LS3
Whirlpool WEE515S0LS0, WEE515S0LV0, WEE515S0LZ0, WEE515SALS0
Whirlpool WEE745H0FE1, WEE745H0FH1, WEE745H0FS2, WEE745H0LZ0
Whirlpool WFE745H0FS2
Note: The models above are a sample, not a full list. Whirlpool sells similar knobs in other finishes under different part numbers, such as W11517334. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM Whirlpool part, not an aftermarket equivalent
Surface burner control knob that mounts on the range front panel
Replaces three earlier Whirlpool knob part numbers
Sold individually
Product Specifications
Part Number
W11517331
OEM Part Number
W11517331
Part Type
Electric Range Surface Burner Control Knob
Condition
Genuine OEM
Manufacturer
Whirlpool
Quantity
1 Knob
Application
Select Whirlpool Electric Ranges
Installation Notes
⚠️ Turn Off The Burner And Let It Cool Make sure all burners are off and cool. Pull the old knob straight off its spindle. Line up the new knob with the spindle and push it straight on until it is fully seated, then check that the off-position marking lines up and the burner responds. If the knob spins freely on a good spindle or the burner still doesn't respond, the burner switch may need replacing instead.
Frequently Asked Questions
My burner won't heat or start. Is a new knob the fix?
Sometimes. If the old knob is stripped, broken or loose, a new knob can fix it. If the knob is in good condition, the burner switch or element is more likely the cause, so check those before replacing the knob.
Is this an OEM or aftermarket part?
This is a genuine OEM part from Whirlpool, not an aftermarket equivalent.
Do I get one knob or a set?
One knob. If you need more than one burner knob replaced, order the quantity you need.
Will this fit my range?
It is listed for many Whirlpool electric ranges, but the model list above is only a sample and some models use a different knob. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO (2 Pack) WE1M1067 Dryer Drum Glide Set - Compatible with GE, Hotpoint, Replaces WE03X37317
Product Description
Restore your dryer’s smooth operation with the WE1M1067 Dryer Drum Glide Set. This replacement replacement set includes four drum glides to support the front of the dryer drum, ensuring smooth rotation. Designed for select GE, Hotpoint dryer models, it fixes issues like squeaking, grinding, or improper drum rotation. Replaces WE03X37317
Note: This include two WE1M1067 Dryer Drum Glide
Replaces part numbers: WE03X37317, WE1M1067, WE01M0316, WE03X37317-50PK, WE1M1067-100PK, WE1M316, WE1M481, WE1M507, AP5668531, AP7217723, PS6447706, PS17137203.
Compatibility:
Compatible with models including but not limited to:
GE: DBXR463ED1WW, DWSR483EG0WW, DBXR463GD0WW, DX4500EG0WW
Hotpoint: NVLR333EV0WW, NBXR333EG0WW
Kenmore: 363.61532410
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand Compatibility: Fits select GE, Hotpoint, and Kenmore dryer models.
🔄 Specifications: Replacement plastic drum glides, each ~2–3" long, clip onto drum support for reliable rotation. 2 11/16" x ⅝" polytetrafluoroethylene.
💰 Cost-Effective: OEM performance at a competitive price.
🛠️ Easy Installation: Requires a screwdriver, putty knife, work gloves; typically installed in 20–40 minutes.
🛡️ Reliable Fixes: Resolves squeaking, grinding, or improper drum rotation.
Safety First: Unplug the dryer or shut off the circuit breaker before installation to avoid electrical shock.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running smoothly today!
Add to cart now for a budget-friendly fix!
Genuine Whirlpool OEM
Whirlpool WP2305258 Refrigerator Ice Dispenser Door Chute
Genuine OEM ice chute door for select Whirlpool, KitchenAid, JennAir, and Kenmore side-by-side refrigerators.
Product Overview
The Whirlpool WP2305258 Refrigerator Ice Dispenser Door Chute is a Genuine OEM dispenser component that opens to allow ice to pass through the chute and closes to help seal the dispenser opening when not in use.
A damaged, warped, or sticking chute door can allow ice to spill, prevent the dispenser from sealing correctly, or cause frost and moisture around the dispenser area.
Quick Answer
WP2305258 is the Genuine Whirlpool OEM ice dispenser chute door. It replaces original part number 2305258 and fits select Whirlpool-built side-by-side refrigerators.
Common Problems This Part May Fix
Ice falls out of the dispenser unexpectedly
Ice chute door will not close fully
Door is cracked, warped, or broken
Warm air enters through the dispenser opening
Frost or moisture forms around the chute
Dispenser flap does not seal after dispensing
Replaces and Cross-References
WP2305258, 1174891, 2305258, AP3854387, AWP885431, AH986856, EAP986856, OEM18021486, PD00004757, PS986856
Cross-reference numbers are supplied for identification. Verify the refrigerator model number before ordering.
Compatibility
Confirmed applications include select Whirlpool-built side-by-side refrigerators sold under Whirlpool, KitchenAid, JennAir, and Kenmore brands. Examples include:
GS6NBEXRY02
KSRS25RVMS05
KSRS25RVMK05
KSCS25FVSS03
KSRT25CRSS00
KSRS25RSMS01
KSCS25FTMK02
KSCS23FVMS01
KSRS25RVMK02
106.54782803
106.57794704
106.57792704
Important: This is only a partial fitment list. Verify the complete model number from the refrigerator data label before purchase.
Key Features
Genuine Whirlpool OEM replacement part
Ice dispenser chute door / flap
Helps direct ice into the dispensing chute
Closes after dispensing to help seal the opening
Direct-fit component for compatible models
Product Specifications
Manufacturer Part Number
WP2305258
Brand
Whirlpool
Part Type
Refrigerator Ice Dispenser Door Chute
OEM Status
Genuine OEM
Appliance Type
Refrigerator
Condition
New
Package Quantity
1 Ice Chute Door
Installation Notes
Disconnect refrigerator power before service.
Remove the dispenser trim or front housing according to the model-specific procedure.
Photograph the original chute-door position and linkage before removal.
Inspect the support bracket, spring, motor/actuator, and seal surfaces for damage.
Install the new chute door in the same orientation and confirm free movement.
Reassemble the dispenser and confirm the door opens during dispensing and closes completely afterward.
Diagnostic tip: If the chute door does not close after replacement, inspect the actuator motor, support bracket, spring, linkage, and dispenser control before replacing additional parts.
Frequently Asked Questions
Is WP2305258 a Genuine OEM part?
Yes. It is a Genuine Whirlpool OEM refrigerator dispenser ice chute door.
Does WP2305258 replace 2305258?
Yes. WP2305258 is the current replacement for original part number 2305258.
What does the ice chute door do?
It opens when ice is dispensed and closes afterward to help seal the dispenser opening.
Will this fit every Whirlpool refrigerator?
No. It fits specific dispenser designs. Confirm the complete refrigerator model number before ordering.
Shop With Confidence
Verify the refrigerator model before ordering. This listing is for the Genuine Whirlpool OEM WP2305258 ice chute door.
Genuine Whirlpool OEMIce Chute DoorCompatibility SupportFast U.S. Shipping
XPARTCO W10542314 Dishwasher Gasket (Without Door Strike)
Fits Specific Whirlpool, Kenmore, Maytag Dishwasher models.
Door Gasket Only (Strike is not included)
Description: This dishwasher gasket and strike kit (W10542314) is designed for a secure and leak-proof seal on your dishwasher. It ensures a tight closure and proper functioning for your appliance. Trust in XPARTCO for expert solutions and reliable performance with your dishwasher.
Replaces Part Numbers:W10542314, 2409202, 8268888, W10284090, W10300589, W10350162, W10542314VP, AP5650274, PS5136129.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WP40111201 Genuine OEM Whirlpool Dryer Drum Belt
The WP40111201 is a genuine Whirlpool OEM drum belt for full-size Whirlpool-built dryers. The belt is a long, slender loop that wraps all the way around the outside of the drum, passes around the tension (idler) pulley, and loops around the drive motor pulley. This belt is the sole mechanical connection between the motor and the drum — there is no gear or direct coupling — so when it breaks or slips off, the dryer behaves in a very specific way: the console lights up, the motor runs, the blower moves air, but the drum sits still. Open the door and spin the drum by hand and it will turn freely with no resistance.
This belt measures 93-3/8 inches long and 3/8 inch wide, with a 5-rib multi-groove profile. Belts fail from age and heat: the rubber hardens over years of thermal cycling, the ribs glaze over and begin slipping under a wet load, and eventually the belt cracks through or snaps outright. A screeching or squealing noise, a rhythmic thump timed to drum rotation, fraying at the edges, or black rubber dust in the cabinet are all signs a belt is near the end of its life. As a genuine OEM part, the WP40111201 is manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It directly replaces 40111201, WP40111201VP, 14218936, 40051501, 40051502, 59174, 821089, AP6009126, PS11742271, and R0606549.
Quick Answer
The WP40111201 Genuine OEM Whirlpool Dryer Drum Belt fixes full-size Whirlpool-built dryers where the motor runs but the drum won't turn, the drum spins freely by hand, or the dryer screeches, squeals, or thumps during operation. 93-3/8" long, 3/8" wide, 5-rib profile. Replaces 40111201, WP40111201VP, 14218936, 40051501, 40051502, 59174, 821089, AP6009126, PS11742271, R0606549. Grooves face against the motor pulley on this platform — same orientation as our Y312959 belt.
Common Problems This Part Fixes
Dryer runs and hums but the drum does not turn — the classic broken belt symptom
Drum spins freely by hand with no resistance when the door is open
Loud screeching or squealing that begins as soon as the cycle starts
Rhythmic thumping or slapping noise timed to drum rotation — cracked or split belt
Grinding or rumbling from inside the cabinet as a frayed belt drags
Drum turns slowly, intermittently, or stalls under a heavy wet load — glazed belt slipping
Dryer won't start, or inadequate heating reported alongside a belt-related noise
Black rubber dust or belt fragments found in the bottom of the cabinet
Visible cracking, fraying, glazing, or stretching on the old belt
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer drum belt directly replaces the following OEM and cross-reference part numbers:
WP40111201, 40111201, 14218936, 40051501, 40051502, 59174, PD00002505, EAP11742271, AP6009126, AWP47792, PS11742271, R0606549, WP40111201VP, 661570V, 661570, 3387610, 3389728, 3393999, 339728, 661570VP, AP5983729, PS11722115.
40111201 is the long-running legacy Whirlpool number and WP40111201 is the current part number carrying the "WP" prefix. If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum belt is compatible with select full-size Whirlpool-built dryers across the Whirlpool family of brands, including:
Whirlpool electric and gas dryers
Maytag dryers (select Whirlpool-built models)
KitchenAid dryers (select models)
Amana dryers (select models)
JennAir dryers (select models)
Kenmore dryers (select Whirlpool-built models, including SDG3606AWW)
Roper, Estate, Admiral, Crosley, Inglis, Magic Chef, and Norge dryers (select models)
This belt fits a large number of standard full-size front-load dryers used across North America. Because the compatible model list spans many years and revisions, always verify your full model number against your dryer's data label before ordering.
Note: Whirlpool and Maytag use more than one length of drum belt across their dryer lineups, and belts of a similar rib count and width are not automatically interchangeable. This belt is 93-3/8" long — it is NOT the same belt as our 100"-long Y312959 belt used on other Maytag/Whirlpool platforms. A belt that's too long or too short for your drum will slip, walk off the pulley, or fail to seat properly. Measure your old belt or verify your model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified length, rib profile, and tension
93-3/8" length, 3/8" width, 5-rib multi-groove design
Wraps around the drum, tension pulley, and drive motor pulley to transfer motor rotation to the drum
Resolves "motor runs but drum won't turn," "screeching," "squealing," and "drum spins freely by hand" symptoms
Multi-rib construction grips the motor pulley without slipping under heavy wet loads
Direct drop-in replacement — no cutting, splicing, or modification required
Replaces 40111201, WP40111201VP, 14218936, 40051501, 40051502, 59174, 821089, AP6009126, PS11742271, and R0606549
Compatible with Whirlpool, Maytag, KitchenAid, Amana, JennAir, Kenmore, Roper, Estate, Admiral, Crosley, Inglis, Magic Chef, and Norge dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WP40111201
Part Type
Dryer Drum Drive Belt
Condition
Genuine OEM
Brand
Whirlpool
Length
93-3/8 in.
Width
3/8 in.
Ribs
5
Material
Reinforced rubber
Rib Orientation
Grooves face against the motor pulley
Routing
Around drum → tension pulley → drive motor pulley
Fuel Type
Electric and gas dryers
Quantity
1 belt
Compatible Brands
Whirlpool, Maytag, KitchenAid, Amana, JennAir, Kenmore, Roper, Estate, Admiral, Crosley, Inglis, Magic Chef, Norge
Installation Notes
⚠️ Unplug Dryer Before Starting — Photograph Belt Routing First Disconnect power at the outlet or shut off the circuit breaker before beginning. On a gas model, also close the gas shutoff valve before moving the cabinet. Wear work gloves — sheet metal edges inside the cabinet are sharp. Pull off the lint trap and remove the screws securing the top panel, then raise the panel and support it with a block of wood. Remove the rear access panel to locate the motor, blower wheel, and belt. Photograph how the old belt routes around the drum, the tension pulley, and the motor pulley before removing anything — if the belt is already broken, note that the grooved side of this belt rides against the motor pulley, with the smooth back facing the drum. Loosen and remove the motor mount, lift the motor slightly, and slide the old belt free. The front panel typically needs to come off as well to fully access the drum. Vacuum out accumulated lint while the cabinet is open — lint buildup around the motor and idler is what cooks belts prematurely. Place the new belt around the drum, seat it in the polished wear track left by the old belt, then route it around the tension pulley and around the motor pulley. Useful trick: tape the belt loosely to the drum with a strip of masking tape before repositioning the motor, so it doesn't slide off while you work. Re-secure the motor mount, then rotate the drum by hand several full turns and confirm the belt tracks straight and stays centered without walking toward an edge. While you're in there, spin the tension pulley and each drum roller by hand — if any is noisy, gritty, or has play, replace it now, since a seized pulley or worn roller will destroy the new belt quickly. Reassemble the front and rear panels and the top panel, restore power, and run a short empty cycle listening for squeal or thump before loading it. Tools needed: Phillips screwdriver, 5/16" nut driver, flat-blade screwdriver, putty knife, masking tape, work gloves.
Frequently Asked Questions
How do I confirm the belt is broken and not the motor?
With the dryer unplugged, open the door and try to spin the drum by hand. An intact belt gives firm resistance, because you're turning the motor and idler through the belt. If the drum coasts freely like a bicycle wheel, the belt is broken or has jumped off its pulleys. Sound is the other tell: with a broken belt the motor hums and the blower whooshes normally, so the dryer sounds like it's running perfectly while the drum sits still. A failed motor usually buzzes and does nothing, or trips the breaker outright.
What's the difference between WP40111201 and 40111201?
They are the same belt across production revisions. 40111201 was the long-running legacy Whirlpool number and WP40111201 is the current number carrying the "WP" prefix Whirlpool adopted. WP40111201VP is a variant packaging code for the same belt. If your dryer's parts diagram or the old belt itself shows any of these numbers, this listing is the correct replacement. The remaining cross-references (14218936, 40051501, 40051502, 59174, 821089, AP6009126, PS11742271, R0606549) are catalog identifiers used by various parts distributors for the same belt.
Is this the same belt as your Y312959 listing?
No. This belt is 93-3/8" long, while the Y312959 belt in our catalog is 100" long — the two are used on different Maytag/Whirlpool dryer platforms and are not interchangeable. Both share a similar 5-rib profile and grooves-against-motor-pulley orientation, which is exactly why they're easy to confuse. Always check your model number or measure your old belt's length before ordering either one.
Which way do the grooves face on this belt?
On this Whirlpool platform, the grooved (ribbed) side of the belt rides against the motor pulley, with the smooth back of the belt facing the drum. This is the same orientation as our Y312959 belt, but it is the opposite of some other manufacturers' platforms — for example, Frigidaire's 134719300 belt runs with the grooves facing down against the drum instead. Always confirm orientation for your specific brand and platform, and photograph the old belt before removing it whenever possible.
The dryer squeals but the drum still turns. Belt or something else?
Could be either, and it's worth diagnosing before you order. A glazed or hardening belt squeals as it slips on the motor pulley, usually loudest at startup and under a heavy wet load. But a dry tension pulley bearing makes a very similar squeal, and worn drum rollers add a low rumble underneath. With the cabinet open, spin the tension pulley and each roller by hand — they should turn smoothly and silently. If they're gritty, noisy, or have play, replace them along with the belt, since they share the same teardown and you'd otherwise be opening the dryer twice.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original 93-3/8" length, 3/8" width, and 5-rib profile of the drum belt originally installed in your Whirlpool, Maytag, KitchenAid, Amana, or related dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine GE OEM Refrigerator Part
GE WR14X29279 Freezer Genuine OEM Door Gasket
White magnetic freezer-door gasket for select GE, Haier, and Hotpoint top-mount refrigerators.
Product Overview
WR14X29279 is a Genuine GE OEM freezer door gasket. The gasket seals around the freezer door to help keep warm, humid room air from entering the freezer compartment.
A torn, hardened, twisted, or poorly sealing gasket can contribute to frost buildup, temperature instability, longer compressor run times, and moisture around the freezer opening.
Quick Answer
This listing is for one white Genuine GE OEM freezer door gasket, part WR14X29279. It is used on select compact GE, Haier, and Hotpoint top-mount refrigerators. Verify the complete appliance model number before ordering.
Common Problems This Part May Fix
Torn or cracked freezer door gasket
Visible gaps around the freezer door
Frost or moisture near the door opening
Warm air entering the freezer compartment
Freezer door does not seal tightly
Refrigerator runs longer because of an air leak
Replaces and Cross-References
WR14X29279, 312240100333, AP6328743, AGE28324, PD00077451
Cross-reference numbers are provided for identification. Always verify fit by complete appliance model number.
Compatibility
Compatible with select GE, Haier, and Hotpoint compact top-mount refrigerators. Verified model examples include:
HA10TG21BSW
HA10TG21CSW
HA10TG21SW
HA12TG21SW
HPS10LGVBRWW
VPS10FGMAWW
VPS10FGMBWW
VPS10FGMCWW
Partial model list only. Similar refrigerators may use a different fresh-food or freezer gasket depending on cabinet size, door color, and production revision.
Key Features
Genuine GE OEM replacement part
Freezer door gasket / magnetic seal
White finish
Helps prevent warm-air infiltration
Designed for select GE, Haier, and Hotpoint refrigerators
Factory-fit replacement for compatible models
Product Specifications
Part Number: WR14X29279
Brand: GE Appliances
Part Type: Freezer Door Gasket
Color: White
Condition: New
Quality: Genuine OEM
Package Quantity: 1 Gasket
Installation Notes
Unplug the refrigerator before service.
Temporarily move food to a safe cold location while the freezer door is open.
Remove the original gasket according to the appliance service procedure.
Install the replacement evenly around the door perimeter, making sure all corners and edges are fully seated.
Close the door and inspect the entire perimeter for gaps.
Shipping crease tip: If the gasket arrives folded or creased, warm it gently with warm water or a hair dryer on low heat, then allow it to relax into shape. Do not overheat the gasket.
Frequently Asked Questions
Is WR14X29279 the freezer gasket or refrigerator-door gasket?
WR14X29279 is the freezer door gasket. The fresh-food door can use a different gasket on the same refrigerator.
Is this Genuine GE OEM?
Yes. WR14X29279 is a Genuine GE Appliances replacement part.
Is the gasket white?
Yes. This part is the white freezer-door gasket version.
Can I install it if it arrives with folds?
Yes. Shipping folds can usually be relaxed by gently warming the gasket before installation.
Shop With Confidence
For best results, compare your complete refrigerator model number before ordering. Door gaskets can look nearly identical while differing in size, magnetic profile, color, or mounting design.
Genuine GE OEMFreezer Door GasketWhiteCompatibility Support
XPARTCO WE04X10052 Dryer Door Switch - Compatible with GE, Hotpoint Dryers
Product Description
Ensure safe and reliable operation of your dryer with the replacement XPARTCO WE04X10052 Dryer Door Switch. This door switch is designed for select GE and Hotpoint dryers, preventing operation when the door is open and ensuring proper start/stop functionality. It addresses issues like the dryer not starting, running with the door open, or failing to stop, offering a cost-effective alternative to OEM parts.
Note: Includes one door switch. Sold individually. Disconnect power before installation. Verify compatibility with your dryer model.
Replaces part numbers: WE04X10052, 877374, WE4X10052, EXPWE4X10052, PD00030680, AH265289, EAP265289, EA265289, AP2042951, PS265289.
Compatibility:
Compatible with models including but not limited to:
GE: WSM2420D0CC , WSM2420D0WW , WSM2420D1CC , WSM2420D1WW , WSM2420D2CC , WSM2420D2WW , WSM2420D3WW , WSM2420D4WW , WSM2420D5WW , WSM2420TAAAA , WSM2420TAACC , WSM2420TAAWW , WSM2420TBAAA , WSM2420TBAWW , WSM2480D0WW , WSM2480D1WW , WSM2480D2WW , WSM2480D3WW , WSM2480TAAAA , WSM2480TAAWW , WSM2480TBAAA , WSM2480TBAWW , WSM2480TCAAA , WSM2480TCAWW
Hotpoint: HTDP120EDWW, NVLR333EE0WW, HTDX100GDWW
Other brands: Select models requiring WE04X10052
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select GE, Hotpoint, and other dryers requiring WE04X10052.
🔥 Specifications: replacement dryer door switch, 2- or 3-terminal configuration, push-to-start functionality.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, work gloves; typically installed in 5–10 minutes.
🛡️ Effective Fixes: Resolves issues like dryer not starting, running with door open, or failing to stop.
Product Specification
Part Number: XPWE04X10052
Component Type: Dryer door switch
Material: Durable plastic housing with metal contacts
Terminal Type: 2- or 3-terminal (model-specific, verify before purchase)
Operating Conditions: Suitable for high-heat dryer environments
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Tools Needed: Phillips screwdriver, work gloves.
Process: Locate the door switch near the dryer door frame, disconnect wiring, remove the old switch, and install the new one, ensuring proper terminal connections.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running safely today!
Add to cart now for a budget-friendly fix!
Genuine Whirlpool W10727360 Microwave Door Switch - Compatible with Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Kenmore
Product Description
Ensure safe microwave operation with the Genuine Whirlpool W10727360 Microwave Door Switch. This OEM three-terminal switch is designed for select Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Magic Chef, Roper, Admiral, and Kenmore microwaves, preventing operation when the door is open to protect users from radiation exposure. Crafted for precise fit and reliable performance, it restores functionality, addressing issues like the microwave not starting or running with the door open.
Note: Includes one three-terminal door switch. Disconnect power before installation. Professional installation is recommended due to microwave shielding requirements.
Replaces part numbers: W10727360, W10269457, 3379124, PD00026511, EAP10057151, AP5950105, PS10057151, W10727360VP.
Compatibility:
Compatible with models including but not limited to:
Whirlpool: WMH31017FB0, WMH31017HB0, WMH31017FS0, WMH31017FW0, WMH75021HZ0
Maytag: MMV4205FZ0, MMV6190FZ0
Amana: AMV2307PFS0
KitchenAid: KMHS120ESS0
Jenn-Air: JMV8208CS0
Kenmore: (select models, verify compatibility)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Magic Chef, Roper, Admiral, and Kenmore microwaves.
🔐 Specifications: OEM three-terminal door switch, approximately 1.5 inches with metal terminals, for precise safety control.
💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability and safe operation.
🛠️ Easy Installation: Requires screwdriver and typically installed in 15–30 minutes by a professional.
🛡️ Effective Fixes: Resolves microwave not starting, intermittent stopping, running with door open, or unusual door noises.
Product Specification
Part Number: Genuine Whirlpool W10727360
Component Type: Microwave door switch (three-terminal)
Material: Plastic housing with metal terminals
Electrical: Compatible with 120V microwave circuits
Mounting: Screw-mounted with spring mechanism, typically located behind the control panel
Operating Conditions: Suitable for household microwave environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the microwave from the power source before installation.
Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your microwave safe and functional today!
Add to cart now for a reliable fix!
XPARTCO WR17X11653 Refrigerator Dispenser Ice Door Flapper
The XPARTCO WR17X11653 is an aftermarket replacement ice door flapper, also sold as the dispenser door assembly, ice chute door or door recess assembly, for GE, Hotpoint and Kenmore side-by-side refrigerators, replacing GE part WR17X11653. It sits in the ice chute opening, seals the freezer against warm room air, and opens when the dispenser lever is pressed so ice can reach your glass.
If the door is cracked, warped, or its gasket no longer seals, warm air gets into the chute and the dispenser suffers. Check your model number before ordering, as the kit may include more than one piece.
Quick Answer
The XPARTCO WR17X11653 Ice Door Flapper replaces the ice chute door on a compatible GE, Hotpoint or Kenmore refrigerator when it is cracked, warped, or no longer seals. Classic symptoms: door sweating, frost buildup at the chute, or ice not dispensing.
Common Problems This Part Fixes
Ice dispenser door sweating
Frost buildup around the ice chute
Ice not dispensing
Cracked, warped or damaged ice door
Worn rubber gasket leaking air into the freezer
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This ice door flapper directly replaces the following part numbers:
WR17X11653, WR17X3093, WR17X3492, AGE28222, AH964304, AP3672582, EA964304, EAP964304, PD00001157, PS964304
If your old part shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This ice door flapper is listed for GE, Hotpoint and Kenmore side-by-side refrigerators, including these examples:
GE TPH21PRSABB, TPH21PBSAWW, TFX20JRSBAD
GE DSE26JSEBCSS, DSF25KGTABG, DSF26DHWABB, CSK28DRBBAA
Kenmore 3639544313, 3639537713, 3639542623
Note: The models above are a small sample. One retailer lists this part for over 1,000 models. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Aftermarket replacement for the GE WR17X11653 ice door flapper
Seals the ice chute opening against warm room air
Opens when the dispenser lever is pressed to release ice
Replaces a cracked, warped or leaking ice door
Product Specifications
Part Number
XPWR17X11653
OEM Part Number
WR17X11653
Part Type
Refrigerator Dispenser Ice Door Flapper
Condition
Aftermarket Replacement
Application
Select GE, Hotpoint and Kenmore Side-by-Side Refrigerators
Installation Notes
⚠️ Unplug Power Before Installing Unplug the refrigerator and move perishable food to a cooler before you begin. Wear work gloves. A Phillips screwdriver and a small flat-blade screwdriver are typically needed. No installation instructions are included with the part, so keep your model's parts diagram handy and note how the old door and any springs or pieces come apart before removing them. Install the new door the same way, then restore power and test the dispenser.
Frequently Asked Questions
What does the ice door flapper do?
It seals the ice chute opening to keep warm room air out of the freezer, and it opens when you press the dispenser lever so ice can drop into your glass.
How do I know if my ice door needs replacing?
Look for a cracked or warped door, a damaged rubber gasket, door sweating, or frost buildup around the chute. Ice that won't dispense can also point to the door.
Is this an OEM or aftermarket part?
This is an aftermarket replacement from XPARTCO, made to replace GE part WR17X11653. If you specifically need a genuine GE part, contact our support team.
Will this fit my refrigerator?
It is listed for a large number of GE, Hotpoint and Kenmore side-by-side models, but the list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
