XPARTCO W10599356 Washer Water Valve
The XPARTCO W10599356 is an aftermarket replacement water inlet valve for Whirlpool-built front-load washers, including full-size and compact models. This valve sits at the back of the washer where the hot and cold water supply hoses connect, and it's the gatekeeper for every drop of water that enters the drum. When the control calls for water, it energizes the valve's solenoid coils to open the hot side, the cold side, or both together, and closes them again once the correct fill level is reached. A valve that won't open leaves you with no fill at all; a valve that won't fully close can let water trickle or flow into the drum even when the cycle isn't calling for it.
Over time, mineral deposits and sediment from the water supply can build up inside the valve body and prevent it from sealing fully, the internal solenoid coil can burn out electrically, and the rubber diaphragm or seal inside can simply wear out with age. A failing valve on this platform commonly triggers an F8 E1 or similar fill-related error code, since the control expects water to reach the correct level within a set time and flags it when that doesn't happen. It directly replaces AP5692067, 3023192, PS8689091, and W10509710.
Quick Answer
The XPARTCO W10599356 Washer Water Valve fixes Whirlpool-built front-load washers that won't fill, fill slowly, overfill, leak water into the drum when the cycle isn't running, or throw an F8 E1 or similar fill-related error code. Solenoid-actuated water inlet valve for the hot and cold supply connections. Replaces AP5692067, 3023192, PS8689091, W10509710. Consider replacing the fill hoses at the same time — they wear on a similar schedule and share the same access point.
Common Problems This Part Fixes
Washer won't fill with water at the start of the cycle
Washer fills much more slowly than normal
Washer overfills or takes on more water than the cycle calls for
Water trickling or leaking into the drum when the washer is off or between cycles
F8 E1 or similar fill-related error code displayed on the control panel
Cycle stalling at the fill step and never advancing to wash
No hot water, no cold water, or neither reaching the drum
Water pooling underneath or behind the washer near the supply connections
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer water inlet valve directly replaces the following OEM and cross-reference part numbers:
W10599356, W10509710, AP5692067, 3023192, 33090084, C-022/16-B21, EAP8689091, AWP41165, PD00022876, PS8689091
W10509710 was the immediately preceding number that Whirlpool revised to W10599356. If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select Whirlpool-built front-load washers across the Whirlpool family of brands, including:
Whirlpool front-load washers — WFW series
Maytag front-load washers — MHW series (select Whirlpool-built models)
KitchenAid, Jenn-Air, and Amana front-load washers (select models)
Magic Chef, Admiral, and Norge front-load washers (select models)
Roper and Kenmore front-load washers (select Whirlpool-built models)
Verified model numbers include: WFW70HEBW0, WFW70HEBW1, WFW70HEBW2, WFW72HEDW0, WFW7590FW0, WFW75HEFW0, WFW80HEBC0, WFW80HEBC1, WFW80HEBC2, WFW80HEBW0, WFW80HEBW1, WFW80HEBW2, WFW81HEDW0, MHW3000BG0, MHW3000BG1, MHW3000BG2, MHW3000BW0, MHW3000BW1, MHW3000BW2, MHW3100DW0, MHW4000BW1, MHW4000BW2, MHW4100DW0, MHW5100DC0, MHW5100DW0, NFW5700BW0, NFW5700BW1, NFW5800DW0, 7MWFW72HEDW0, 7MWFW80HEBW0, and 7MWFW81HEDW0.
Note: This valve fits Whirlpool's front-load washer platform. It is not intended for top-load washers, which use a different valve design and mounting configuration. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement solenoid-actuated water inlet valve for hot and cold supply connections
Resolves "won't fill," "fills slowly," "overfills," and "leaking into the drum" symptoms caused by valve failure
Commonly resolves F8 E1 and similar fill-related error codes
Direct drop-in replacement for the superseded W10509710 valve
Replaces AP5692067, 3023192, PS8689091, and W10509710
Compatible with a wide range of Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore front-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Straightforward DIY repair — typically completed in 30 to 60 minutes
Product Specifications
Part Number
W10599356
OEM Part Number
W10599356 (formerly W10509710)
Part Type
Washer Water Inlet Valve
Condition
Aftermarket Replacement
Application
Front-Load Washers (Whirlpool-Built)
Actuation
Solenoid-operated
Connections
Hot and cold water supply inlets
Supersedes
W10509710
Repair Difficulty
Easy to Moderate — 30 to 60 minutes
Quantity
1 valve
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore
Installation Notes
⚠️ Shut Off Water Supply And Unplug Washer Before Starting — Have A Towel Ready Unplug the washer or shut off its circuit breaker, and shut off both the hot and cold water supply valves before beginning. Wear work gloves. Disconnect the hot and cold water supply lines from the back of the valve first — have a towel or shallow pan ready, since residual water will spill out. Use a 1/4" nut driver or socket to remove the rear screws securing the top panel, then slide the panel back and lift it off to access the valve from inside the cabinet. Photograph the wiring connections before disconnecting anything. Disconnect the electrical connector from the old valve, remove the mounting screw or bracket (often a T-20 Torx screw), and pull the valve free from its mounting position. Install the new W10599356 in the same orientation, secure the mounting screw, and reconnect the electrical connector fully. Reattach the hot and cold water supply lines to the correct ports, tightening securely by hand plus a partial turn with pliers. Reinstall the top panel, restore the water supply, and check every connection you touched for leaks before restoring power. Run a short cycle and confirm the tub fills at the normal rate with no leaking underneath or behind the washer. While everything is accessible, consider replacing the fill hoses as well, since they wear on a similar schedule. Tools needed: 1/4" nut driver or socket, T-20 Torx bit, pliers, towel or shallow pan, work gloves.
Frequently Asked Questions
My washer shows an F8 E1 error. Does that mean the valve is definitely bad?
It's a strong indicator, but check the basics first. F8 E1 and similar fill-related codes generally mean the control didn't see water reach the expected level within its allotted fill time. Before replacing the valve, confirm both hot and cold supply valves at the wall are fully open, check the inlet screens inside the valve ports for sediment or debris, and make sure the fill hoses aren't kinked. If those check out and the washer still won't fill properly, the inlet valve itself is the likely cause.
Water keeps trickling into the drum even when the washer is off. Is that the valve?
Yes, this is one of the classic symptoms of a valve that isn't sealing fully closed. Mineral deposits, sediment, or a worn internal diaphragm can prevent the valve from shutting off completely, letting a slow trickle of water continue into the drum between cycles. This can eventually lead to an overfill or water pooling at the front of the washer, so it's worth addressing promptly rather than waiting.
Only hot or only cold water isn't coming in. Do I need to replace the whole valve?
Usually yes. Most washer inlet valves use two separate solenoid coils in one housing — one for hot, one for cold — but they're not typically sold as separately replaceable coils. If just one side has stopped working while the other functions normally, that still points to a failure inside this valve assembly, and replacing the complete unit is the standard repair.
Should I replace the fill hoses while I'm in there?
It's a good idea. The fill hoses connect right at the same point you'll already have exposed, wear on a similar timeline as the valve, and are a common source of slow leaks that get blamed on the valve. Since you're already accessing this area, replacing hoses that show any cracking, bulging, or stiffness saves you from repeating the disassembly later.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the solenoid design, flow rate, and mounting configuration of the original W10599356 / W10509710 valve used in compatible Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore front-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
A00126401 Genuine OEM Frigidaire Dishwasher Drain Pump Motor
The A00126401 is a genuine Frigidaire OEM drain pump motor assembly for Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, and Kenmore dishwashers. At the end of each wash cycle, this pump is what actually pushes the used wash water out of the tub and through the drain hose, clearing the way for the next fill. An internal impeller spins to create that flow, drawing water in and forcing it out through the drain line.
Rated 120V, 60Hz, 35W, 0.8A, 3600RPM, with 1/4" male terminals, this assembly includes the pump motor, impeller, and seal. Common causes of failure include clogs from food particles or debris interfering with the impeller, worn or damaged impeller blades, and electrical failure of the motor itself. A failing drain pump typically shows up as water not draining from the dishwasher, water pooling at the bottom of the tub after a cycle, a grinding or humming noise from the pump area, or the dishwasher refusing to start a new cycle because it detects standing water left over from the last one. It directly replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, and EAP2363535.
Quick Answer
The A00126401 Genuine OEM Frigidaire Dishwasher Drain Pump Motor fixes Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, and Kenmore dishwashers that won't drain, pool water at the bottom of the tub, make grinding or humming noises, or won't start a new cycle due to leftover water. 120V, 60Hz, 35W, 0.8A, 3600RPM. Replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, EAP2363535. Before replacing the pump, check the drain hose and sump screen for a simple clog — one customer replaced the pump, still had no drainage, and found a clogged drain hose was the actual cause.
Common Problems This Part Fixes
Dishwasher won't drain at the end of the cycle
Water pooling at the bottom of the tub after a completed cycle
Grinding or humming noise coming from the pump area
Dishwasher won't start a new cycle because it detects leftover water from the previous one
Dishes not getting properly cleaned due to poor water circulation
Pump running but producing little or no actual drainage
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher drain pump motor directly replaces the following OEM and cross-reference part numbers:
A00126401, 154736201, 3015405, 5304492415, PD00000922, EAP2363535, AFR20557, AP5690431, PS8689824
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain pump motor is compatible with select Frigidaire dishwashers, and also fits select Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, and Kenmore/Sears dishwashers built on the same platform.
Note: This assembly includes the pump motor, impeller, and seal. Whether a check valve flapper is included can vary by supplier batch — inspect your old pump's flapper condition before assuming one is included, and contact our support team if you need to confirm. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Frigidaire OEM part — factory-specified motor speed and impeller design
Pumps water out of the tub and through the drain hose at the end of each cycle
Resolves "won't drain," "water pooling," "grinding or humming noise," and "won't start due to leftover water" symptoms caused by pump failure
Includes pump motor, impeller, and seal
Rated 120V, 60Hz, 35W, 0.8A, 3600RPM
1/4" male terminals for a direct plug-in electrical fit
Direct drop-in replacement — no modification required
Replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, and EAP2363535
Compatible with Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, and Kenmore dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
A00126401
Part Type
Dishwasher Drain Pump Motor Assembly
Condition
Genuine OEM
Brand
Frigidaire
Voltage
120V
Frequency
60 Hz
Wattage
35 W
Amperage
0.8 A
Motor Speed
3600 RPM
Terminals
1/4" male
Kit Contents
Pump motor, impeller, seal
Dimensions
Approx. 3-1/4"L x 2-1/2"W x 3-3/4"H
Color
White / Green
Repair Difficulty
Easy to Moderate — under an hour
Quantity
1 drain pump motor assembly
Compatible Brands
Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, Kenmore
Installation Notes
⚠️ Unplug Dishwasher Before Starting — Rule Out A Simple Clog First Before replacing the pump, check the drain hose and the sump screen at the bottom of the tub for a clog — food debris and buildup in the hose can produce identical "won't drain" symptoms to a failed pump, and clearing a clog costs nothing but a few minutes. One customer replaced the pump entirely, still had no drainage, and only afterward discovered the actual cause was a clogged drain hose; disconnecting and running a cycle without the hose attached can help confirm whether the pump itself is pushing water. Once you've confirmed the pump needs replacing, disconnect power at the outlet or shut off the circuit breaker, and pull the dishwasher out from under the counter for access to the underside — removing the two screws securing it to the counter first. Have a drain pan or towels ready for residual water. Photograph the wiring and hose connections before disconnecting anything. Disconnect the two wire connectors from the old pump, remove the three screws securing it in place, and disconnect the hose connections, then pull the old pump free. Install the new A00126401 in the same position, reconnect the hose connections, and reconnect the two wire connectors. Secure the pump with its three mounting screws. Slide the dishwasher back into place and secure it to the counter, restore power, and run a full test cycle to confirm normal draining with no leaks or unusual noise. Tools needed: Phillips screwdriver, flat-blade screwdriver, needle-nose pliers, drain pan, work gloves.
Frequently Asked Questions
My dishwasher won't drain. How do I know if it's actually the pump and not something simpler?
Check the drain hose and the sump screen at the bottom of the tub for a clog first — this is a genuinely common cause of "won't drain" symptoms and costs nothing to rule out. If the hose and screen are clear and the pump still won't run, test the pump motor with a multimeter for continuity. If there's no continuity, or the pump is getting power but still won't run, replacement is the correct fix.
I already replaced the pump and it's still not draining. What should I check next?
This has happened to real customers, and the cause was ultimately a clogged drain hose rather than the pump itself. If replacing the pump didn't solve the drainage problem, disconnect the drain hose and run a test cycle to see whether water is being pushed out at all — if it is, the hose downstream is the likely culprit and worth snaking out or replacing.
Does this kit include the check valve flapper?
This varies by supplier batch — this assembly reliably includes the pump motor, impeller, and seal, but flapper inclusion isn't consistent across all sources. Inspect your old pump's flapper for wear or damage before installation, and contact our support team if you need to confirm whether a flapper is included with your specific order.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original motor speed, impeller design, and terminal configuration of the drain pump originally installed in your dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 5304511335 Washer Water Level Pressure Switch – Compatible with Frigidaire & Electrolux Washers
Product Description
Restore accurate water level control and proper washer operation with the XPARTCO 5304511335 Washer Water Level Pressure Switch. It is responsible for detecting the water level inside the washer tub and ensuring accurate water level control during the wash cycle. It detects the pressure changes caused by the water level, allowing the washer to adjust the water intake accordingly.
A faulty pressure switch can cause overfilling, under-filling, or cycles not advancing properly. Replacing it with this reliable XPARTCO component helps ensure correct water levels and consistent wash performance.
XPARTCO provides cost-effective aftermarket appliance parts engineered to match original fit and function.
Replaces Part Numbers
5304511335, 4584277, EAP12176459, AFR17584, OEM18784872, PD00046588, AP6261621, PS12176459.
Compatibility
This replacement washer water level pressure switch fits select Frigidaire, Electrolux, Gibson, Crosley, and Kenmore (Frigidaire-manufactured) washers.
Common compatible models include (but are not limited to):
Frigidaire FFTW4120SW1, FFTW4120SW0, FFTW4120SW, FFTW4120SW0
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM fit and pressure sensing performance
💧 Accurate Water Level Detection – Ensures proper fill and cycle control
⚙️ Fixes Common Issues – Resolves overfill, underfill, and cycle errors
🧩 Direct-Fit Design – Installs easily with existing hose and wiring
💰 Cost-Effective Repair – Affordable alternative to OEM pressure switches
⚠️ Symptoms
If your washer is experiencing any of the following issues, this part may need replacement:
💧 Washer overfilling or underfilling
⚠️ Incorrect water levels during cycles
🔄 Cycle not advancing properly
🛑 Washer stops mid-cycle
🚫 No water or continuous filling
Replacing this pressure switch can restore proper water level control and washer performance.
📐 Product Specification
Part Number: 5304511335
Component Type: Washer Water Level Pressure Switch
Function: Detects water level and signals control board
Connection Type: Air hose + electrical connector
Application: Washer water level sensing system
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver
⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock.
Basic Steps:
Disconnect washer power.
Access the control panel or top panel.
Locate the pressure switch and disconnect the air hose and wiring.
Remove mounting screws and remove the old switch.
Install the new XPARTCO 5304511335 pressure switch.
Reconnect hose and wiring, reassemble, and restore power.
Run a test cycle to verify correct water levels.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore accurate water level control and reliable washer performance — Add to Cart Now for a dependable repair!
XPARTCO DC66-00777A Washer Pulsator Cap – Compatible with Samsung Washers
Product Description
Keep your washer operating smoothly with the XPARTCO DC66-00777A Washer Pulsator Cap. This high-quality aftermarket replacement covers the central pulsator bolt, preventing water, detergent, and debris from entering the washer hub. A cracked or missing cap can lead to corrosion, noise, or imbalance during spin cycles. Replacing it with this durable XPARTCO cap restores a secure seal and helps maintain optimal washing performance.
Replaces Part Numbers
DC66-00777A, PD00025125, EAP8753312, AP5788799, 3282678, PS8753312.
Compatibility
This replacement pulsator cap fits select Samsung top-load washers.
Example compatible models include (but are not limited to): Samsung WA400PJHDWR/AA, WA422PRHDWR/AA, and WA45H7000AW/A2.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM fit and performance for Samsung washers
💧 Protective Seal – Keeps water and detergent away from the pulsator bolt area
💰 Cost-Effective Solution – Durable and affordable alternative to OEM caps
🛠️ Simple Installation – No tools required; snaps directly into place
🛡️ Fixes Common Issues – Replaces missing or damaged caps to prevent rust and noise
📐 Product Specification
Part Number: DC66-00777A
Component Type: Washer Pulsator (Washplate) Cap
Material: High-strength molded plastic
Color: Gray or silver finish (varies by batch)
Mounting: Snap-fit installation on top of pulsator bolt
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: None
⚠️ Safety First: Always unplug the washer before performing any maintenance to avoid electrical shock.
Steps:
Open the washer lid and locate the center of the pulsator (washplate).
Remove any remaining parts of the old or damaged cap.
Align the new XPARTCO DC66-00777A cap with the pulsator hub opening.
Press firmly until it clicks into place.
Verify the cap is secure before running a wash cycle.
⏱️ Time Required: Less than 5 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Protect your washer from wear and debris — Add to Cart Now for a quick, reliable fix!
5220FR2006H Washer Genuine OEM Water Inlet Valve (Hot)
The 5220FR2006H is a genuine LG OEM hot water inlet valve for LG front-load washers, and also fits select Kenmore models. This valve connects to your home's hot water line and controls the flow of hot water into the tub during the fill portion of each cycle, opening as the cycle calls for hot water and closing once the correct fill level and temperature mix are reached. The valve has a standard hose fitting inlet and a single water outlet.
Common causes of failure include mineral or sediment buildup inside the valve body and general electrical wear in the solenoid. Symptoms of a failing valve include the washer not filling, not stopping when it should, not starting, leaking water, not washing properly, no hot water reaching the tub, or an IE error code displayed on the control panel. It directly replaces 1268123, 5220FR1280F, 5220FR2006L, 5220FR2006Q, AP4441935, ALG51717, AH3527427, EA3527427, EAP3527427, PD00001765, PS3527427.
Quick Answer
The 5220FR2006H Washer Genuine OEM Water Inlet Valve (Hot) fixes LG and select Kenmore front-load washers with no hot water, won't fill, won't stop filling, won't start, leaking, or an IE error code. Standard hose fitting inlet, 1 outlet. Replaces 1268123, 5220FR1280F, 5220FR2006L, 5220FR2006Q, AP4441935, ALG51717, AH3527427, EA3527427, EAP3527427, PD00001765, PS3527427. This is the hot water valve — a separate but related cold water valve is used alongside it. If both valves are original and the same age, consider replacing both together while you have the washer open.
Common Problems This Part Fixes
No hot water reaching the tub
Washer not filling with water
Washer not stopping fill when it should
Washer not starting
Water leaking from the valve area
IE error code displayed on the control panel
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer hot water inlet valve directly replaces the following OEM and cross-reference part numbers:
1268123, 5220FR1280F, 5220FR2006L, 5220FR2006Q, AP4441935, ALG51717, AH3527427, EA3527427, EAP3527427, PD00001765, PS3527427
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This hot water inlet valve is compatible with select LG front-load washers, and also fits select Kenmore washers built on the LG platform, including model numbers such as WM2240CW, WM2250CW, WM2277HW, WM3170CW, WM3250HV, 40272, 40441 (ABWESEU), 41002, 41003, 41172 (ABWEPEU), 41172 (ABWESEU), 41182, 41262 (ABWEPEU), 41262 (ABWEVEU), and 41283.
Note: This is the hot water valve. Our 5220FR2008C listing is the related cold water valve, and our 5220FR2008F listing is a closely related water inlet and dispenser valve assembly used on other models — these are separate parts serving different roles or platforms. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which valve your washer needs.
Key Features
Genuine LG OEM part — factory-specified solenoid design and flow rate
Regulates hot water flow into the tub during fill
Resolves "no hot water," "won't fill," "won't stop filling," "won't start," "leaking," and "IE error code" symptoms
Standard hose fitting inlet, 1 water outlet
Direct drop-in replacement — matches the original mounting and hose connections
Replaces 1268123, 5220FR1280F, 5220FR2006L, 5220FR2006Q, AP4441935, ALG51717, AH3527427, EA3527427, EAP3527427, PD00001765, PS3527427
Compatible with LG and select Kenmore front-load washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Simple 15-minute DIY repair
Product Specifications
Part Number
5220FR2006H
Part Type
Washer Hot Water Inlet Valve
Condition
Genuine OEM
Brand
LG
Application
Front-Load Washers
Inlet
Standard hose fitting
Outlet
1
Related Part
5220FR2008C cold water valve (sold separately)
Repair Difficulty
Easy — approx. 15 minutes
Quantity
1 valve
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Shut Off Water Supply And Unplug Washer Before Starting Turn off the water supply and unplug the washing machine from the wall before beginning. Wear work gloves. Locate the top cover of your washer — depending on your model, it may be located along the side or in the back — and use a flat-blade screwdriver to gently pry it off. Locate the hot water valve and disconnect the water supply hose from it, using locking pliers to loosen the hose clamp before carefully pulling the hose away. Unscrew the screws holding the valve in place and gently remove it from the washer. Mount the new 5220FR2006H valve in place and replace the screws. Reconnect the water supply hose to the valve and tighten the hose clamp using locking pliers. Turn the water supply back on and plug the washer back in. Test the new valve by running a load of laundry and checking for any leaks. Tools needed: flat-blade screwdriver, locking pliers, work gloves.
Frequently Asked Questions
My washer isn't getting hot water. Is this the part I need?
Yes, this is the most direct symptom of a failed hot water inlet valve. Since this valve is what admits hot water from your household supply into the washer, a solenoid failure or internal blockage can prevent hot water from entering properly, even if cold water fill still works normally.
My washer shows an IE error code. Could this valve be the cause?
Yes, an IE error code on LG washers is commonly tied to a fill issue, and a failed inlet valve — hot or cold — is one of the most frequent causes. Confirm which side (hot or cold) is actually affected before ordering, since these are separate parts.
Should I replace the cold water valve at the same time?
It's worth considering, especially if both valves are the same age. One customer specifically purchased both the hot and cold water inlet valves together during a single repair, along with a new drain pump motor, rather than tackling each part separately over multiple repairs.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original solenoid design, flow rate, and connection type of the hot water inlet valve originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WE03X10016 Dryer Genuine OEM Drum Roller Assembly – Compatible with GE & Hotpoint Dryers
Product Description
Restore smooth, quiet dryer operation with the WE03X10016 Dryer Genuine OEM Drum Roller Assembly. This factory-approved roller supports the dryer drum as it rotates, reducing friction and vibration during operation. A worn or damaged drum roller can cause squealing, thumping, grinding noises, or uneven tumbling. Replacing it with this Genuine OEM assembly ensures proper drum alignment, quiet performance, and long-lasting reliability.
Replaces Part Numbers
WE03X10016, WE01X10384, WE12M39, WE01X10385, WE01X10386, 3029206, PD00042055, EAP8756654, AP5793315, PS8756654.
Compatibility
This Genuine OEM drum roller assembly fits select GE and Hotpoint dryers.
Example compatible models include (but are not limited to):GE GTD33EASK0WW, GTD42EASJ2WW, GTD45EASJ2WSHotpoint HTDX100EM8WW, HTDX100ED6WW
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🧩 Genuine OEM Replacement – Factory-certified for exact fit and smooth rotation
🔇 Noise Reduction – Helps eliminate squealing, thumping, and grinding sounds
⚙️ Stable Drum Support – Maintains proper drum alignment during all cycles
💪 Durable Construction – OEM-grade materials designed for long service life
🛡️ Fixes Common Issues – Resolves noisy operation, drum drag, or uneven tumbling
📐 Product Specification
Part Number: WE03X10016
Component Type: Dryer Drum Roller Assembly
Material: OEM-grade polymer roller with metal shaft insert
Mounting: Slides onto support shaft and secures with retaining clip
Location: Rear drum support (varies by model)
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver, pliers
⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock.
Steps:
Disconnect power and remove the dryer front panel and drum as required.
Locate the worn drum roller on the rear support shaft.
Remove the retaining clip and slide off the old roller assembly.
Install the new WE03X10016 roller assembly and secure it with the clip.
Reinstall the drum and panels, then restore power.
Run a test cycle to confirm quiet, smooth operation.
⏱️ Time Required: 30–45 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Genuine OEM Replacement Part
🔄 30-Day Return Policy
Restore quiet, smooth dryer performance — Add to Cart Now for a factory-quality repair!
XPARTCO 5220FR2008C Washer Water Valve
The XPARTCO 5220FR2008C is an aftermarket replacement water inlet and dispenser valve assembly for LG front-load washers, and also fits select Kenmore models. This valve connects to your home's water source and to the washer's solenoid wiring, controlling exactly how much water enters the tub and ensuring the correct fill level for each cycle. The assembly has 1 inlet and 4 outlets.
Rated 120V, 60Hz. Common failure causes include mineral or sediment buildup inside the valve body and general electrical wear in the solenoid coils. A failing valve produces a clear set of symptoms: the washer continuing to fill even after it should be full, filling slowly, overfilling, or leaking water into the drum when the washer is off. On some LG models, this can also trigger an FE error code specifically tied to the fill process. It directly replaces 5220FR2008C, 1345045, AH3527429, EA3527429, OEM13323375, AP4441122, ALG312490, PD00001833, PS3527429
Quick Answer
The XPARTCO 5220FR2008C Washer Water Valve fixes LG and select Kenmore front-load washers that keep filling past full, fill slowly, overfill, or leak water into the drum when off — sometimes accompanied by an FE error code. 120V, 60Hz, 1 inlet, 4 outlets. Replaces 5220FR2008C, 1345045, AH3527429, EA3527429, OEM13323375, AP4441122, ALG312490, PD00001833, PS3527429. Some LG steam washers use this valve alongside a separate hot water valve — if only one side is failing, you may only need to replace the specific valve at fault rather than the whole group.
Common Problems This Part Fixes
Washer continues filling with water even after it should be full
Washer filling slowly
Washer overfilling
Water leaking into the drum when the washer is turned off
FE error code displayed during the fill portion of the cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer water inlet valve directly replaces the following OEM and cross-reference part numbers:
5220FR2008C, 1345045, AH3527429, EA3527429, OEM13323375, AP4441122, ALG312490, PD00001833, PS3527429
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select LG front-load washers, and also fits select Kenmore washers built on the LG platform.
Note: LG uses several visually similar water valves across its washer lineup, including 5220FR2006H and 5221ER1003S. This part is also closely related to our 5220FR2008C cold water inlet valve listing — some model listings note that either may fit depending on the exact production run, but they are separate part numbers. Always confirm your exact part number — comparing your old valve's printed number and photo against the listing is the most reliable way to avoid ordering a similar-looking but incorrect valve. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement water inlet and dispenser valve assembly
Resolves "won't stop filling," "fills slowly," "overfills," "leaks when off," and "FE error code" symptoms
1 inlet, 4 outlets
Rated 120V, 60Hz
Sold individually
Direct drop-in replacement — matches the original mounting and hose connections
Replaces 1345045, AH3527429, EA3527429, OEM13323375, AP4441122, ALG312490, PD00001833, PS3527429
Compatible with LG and select Kenmore front-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XP5220FR2008C
OEM Part Number
5220FR2008C
Part Type
Washer Water Inlet & Dispenser Valve Assembly
Condition
Aftermarket Replacement
Application
Front-Load Washers
Voltage
120V
Frequency
60 Hz
Inlets / Outlets
1 inlet, 4 outlets
Weight
Approx. 0.60 lbs
Package Dimensions
5.12" x 4.69" x 3.98"
Repair Difficulty
Easy to Moderate
Quantity
1 valve (sold individually)
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Shut Off Water Supply And Unplug Washer Before Starting Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Access on most LG front-load washers requires removing the top cover to reach the water valve assembly and its electrical connections and hoses. On models with multiple valves (some LG steam washers use one separate hot water valve plus a group of cold water valves), identify specifically which valve is failing before removing anything — check your old valve's printed part number and compare it against a reference photo, since several LG valves look very similar. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and hose from the failing valve, remove its mounting screws, and pull it free. Install the new 5220FR2008C in the same position, reconnect the hose and electrical connector fully, and secure the mounting screws. Restore the water supply and power, then run a full test cycle to confirm correct fill behavior with no leaking or error codes. Tools needed: Phillips screwdriver, pliers, work gloves.
Frequently Asked Questions
My washer shows an FE error code. Is this the valve I need?
Possibly. One customer reported an FE error appearing while the machine was still "filling," which pointed to one of the hot or cold water valves not working correctly. If your FE error consistently appears during the fill portion of the cycle, this valve is a reasonable place to start troubleshooting.
My washer has more than one water valve. Do I need to replace all of them?
Not necessarily. Some LG steam washers use a separate hot water valve plus a group of valves fed from the cold water main, and it's common for only one specific valve in that group to actually be bad. One customer confirmed this exact setup, testing and replacing only the single failing valve rather than the entire group, which resolved their issue.
How do I make sure I'm ordering the correct valve, since several look similar?
Check the part number printed directly on your old valve and compare it, along with a photo if available, against the listing before ordering. One customer specifically noted that several LG valves looked alike, and having a clear reference photo was what let them positively identify the correct replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured to match the solenoid design, inlet/outlet configuration, and electrical rating of the original 5220FR2008C valve used in compatible LG and Kenmore front-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WP3406107 Dryer Door Switch
The Genuine OEM Whirlpool WP3406107 is a dryer door switch for Whirlpool, Kenmore, Maytag, and KitchenAid dryers. It mounts inside the top of the dryer's front panel, with one end connecting to the wiring harness and the other passing through the panel to make contact with the door. When the door closes, it presses the switch's black tab, which tells the dryer the door is shut so it can run. When the switch wears out, the dryer may not start, may run with the door open, or may lose its interior light.
This is the original Whirlpool part, a white, 6.5 inch, three-wire switch. Retailers describe the switch as a regular wear part and rate the repair as really easy, typically 15 to 30 minutes.
Quick Answer
The Genuine OEM WP3406107 Door Switch fixes a Whirlpool, Kenmore, Maytag, or KitchenAid dryer that won't start, runs with the door open, has a light that doesn't work, or has a door that won't close properly. Quick test: with the dryer unplugged, press the switch's black tab. If it has no resistance and doesn't click, the switch likely needs replacing.
Common Problems This Part Fixes
Dryer won't start
Dryer runs with the door open
Interior light doesn't work
Door won't close or latch properly against the switch
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This door switch directly replaces the following part numbers:
WP3406107, WPW10569603, 3406107, W10569603, 3405100, 3405101, 3406100, 3406101, 528948, 11259-65, 11288-80, WP3406107VP, AP6008561, AWP47183, EAP11741701, PD00002378, PS11741701
These numbers come from retailer cross-reference lists and span several generations of Whirlpool's own numbering for this switch. Confirm against your dryer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This door switch is listed for Whirlpool, Kenmore, Maytag, and KitchenAid dryers, including these examples:
Kenmore 11060372710, 11060522900, 11060702990, 11060802990
Kenmore 11061202010, 11061262311, 11061802000
Whirlpool EED4400WQ
Note: The models above are a small sample of a longer list, not a full list. This is a three-wire switch that replaces the two-wire switch found on many models, so compare it to your old switch, and contact our support team with your model number to verify fit before ordering.
Key Features
Genuine OEM Whirlpool dryer door switch, not an aftermarket equivalent
Three-wire design; replaces the two-wire switch on many models
White, 6.5 inch switch with a spring-loaded black tab
Resolves no-start, runs-with-door-open, and light problems caused by a worn switch
Typically a 15 to 30 minute repair
Product Specifications
Part Number
WP3406107
OEM Part Number
WP3406107
Part Type
Dryer Door Switch
Condition
Genuine OEM
Manufacturer
Whirlpool
Length
6.5 Inches
Color
White
Wire Configuration
Three-Wire
Application
Whirlpool, Kenmore, Maytag & KitchenAid Dryers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer before beginning, and shut off the gas supply first on gas models. Wear work gloves, as cabinet edges can be sharp. The switch is mounted inside the top of the front panel, so follow your model's service guide to remove the panel needed to reach it. Note how the wiring connector is attached, disconnect it, and remove the old switch. Fit the new switch in the same position, reconnect the wiring, and reassemble. Restore power and confirm the dryer starts with the door closed and stops when the door is opened.
Frequently Asked Questions
My dryer won't start. Is this the part I need?
A worn door switch is a common cause. With the dryer unplugged, press the switch's black tab. If there is no resistance and no click, the switch likely needs replacing.
My dryer runs with the door open. Is that a problem?
Yes. The door switch is a safety part that stops the dryer from running when the door is open. If the dryer runs with the door open, replace the switch promptly.
My dryer has a two-wire switch. Will this three-wire switch work?
Retailers list this three-wire switch as the replacement for the two-wire switch found on many models. Compare it to your old switch and your wiring, or contact our support team with your model number, before ordering.
Will this fit my dryer?
It is listed for many Whirlpool, Kenmore, Maytag, and KitchenAid dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WE01X30638 Laundry Center Control Knob
The XPARTCO WE01X30638 is an aftermarket replacement control knob compatible with select GE, Hotpoint, RCA, and Kenmore GE-built laundry centers (stacked washer/dryer combination units). The control knob mounts on the timer or cycle selector shaft on the laundry center's control panel — it's what you grip and turn to choose wash cycles, dry cycles, and timer settings on both the washer and dryer sections of the unit. Because a stacked laundry center's knobs get twice the daily use of a standalone appliance (one control panel serving both washer and dryer functions), cracked and stripped knobs are one of the most common repairs on these units.
Constructed from durable black ABS plastic with a polished silver edge ring and an internal metal plate insert that grips the D-shaped control shaft — allowing precise detent positioning so you land exactly on your desired cycle setting. Approximately 2" in diameter with thick inner walls to resist the cracking that plagues aging original knobs. Snap-on installation — pulls straight off, pushes back on, no tools required. This is the current production version, directly superseding WE01X24776. It also replaces 4961358, AP6996856, PS16226089, and EAP16226089. Installs in under 1 minute — no tools required.
Quick Answer
The XPARTCO WE01X30638 Laundry Center Control Knob replaces a cracked, stripped, or missing control knob on GE, Hotpoint, RCA, and Kenmore GE-built stacked laundry centers. Black ABS plastic with polished silver edge, ~2" diameter, internal metal plate for a firm shaft grip. Snap-on — no tools required. Current part superseding WE01X24776; also replaces 4961358, AP6996856, PS16226089, EAP16226089. Compatible with GE GUD27ESPM0DG, GUD27ESPM1DG, GUD27GSPM0DG, GUD27GSPM1DG and related GUD27 series laundry centers.
Common Problems This Part Fixes
Control knob cracked or split from age and repeated use — the most common failure on GUD27-series laundry centers
Knob spinning freely on the shaft — internal grip stripped, no longer changing settings when turned
Knob difficult to turn or not responding — worn internal metal plate no longer engaging the shaft
Knob missing entirely from the control panel
Knob loose and wobbling on the shaft — imprecise cycle selection
Hairline cracks visible around the knob's shaft opening — early-stage failure that will soon strip
Knob damaged from impact or overtightened grip
Replacing multiple aging knobs at once — original knobs from the same production era tend to crack around the same time
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This laundry center control knob directly replaces the following OEM and cross-reference part numbers:
WE01X30638, WE01X24776, AGE25575, AP6996856, EAP16226089, PD00068517, PS16226089.
WE01X30638 is the current production part superseding WE01X24776. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This control knob is compatible with select laundry centers (stacked washer/dryer units) from the following brands:
GE laundry centers — GUD27ESPM0DG (electric dryer) and GUD27ESPM1DG series
GE laundry centers — GUD27GSPM0DG (gas dryer) and GUD27GSPM1DG series
GE laundry centers — related GUD27 series models (verify with parts diagram)
Hotpoint laundry centers (select GE-built models)
RCA laundry centers (select GE-built models)
Kenmore / Sears laundry centers (select GE-built models)
Tip: If one knob on your laundry center has cracked, inspect the others — knobs from the same production era typically develop cracks around the same time. Since the replacement takes seconds and the knobs are identical, many customers order two or more at once and replace them all in a single session, avoiding a repeat order a few months later. This knob is approximately 2" in diameter — confirm your original knob's size matches before ordering.
Key Features
Control knob for laundry center timer and cycle selection — installs on the control panel shaft
Durable black ABS plastic construction with thick inner walls — resists the cracking common on aging original knobs
Polished silver edge ring for a clean, modern look that matches GE laundry center styling
Internal metal plate insert grips the D-shaped control shaft firmly — precise detent positioning for accurate cycle selection
Approximately 2" diameter with smooth mirror-polished surface for a comfortable grip
Snap-on installation — pulls straight off the shaft, pushes back on; no tools or hardware required
Current production part — directly supersedes WE01X24776
Replaces 4961358, AP6996856, PS16226089, and EAP16226089
Compatible with GE GUD27ESPM0DG/1DG and GUD27GSPM0DG/1DG laundry centers, plus Hotpoint, RCA, and Kenmore GE-built models
Aftermarket replacement built to OEM-equivalent quality standards
Quick replacement — installs in under 1 minute
Product Specifications
Part Number
XPWE01X30638
Supersedes
WE01X24776
Part Type
Laundry Center Control Knob (Timer / Cycle Selector)
Condition
Aftermarket Replacement
Application
Laundry Centers / Stacked Washer-Dryer Units (GE platform)
Diameter
Approximately 2"
Color
Black with polished silver edge
Material
ABS plastic with internal metal plate insert
Shaft Type
D-shaped shaft receiver
Installation
Snap-on — no tools required
Compatible Brands
GE, Hotpoint, RCA, Kenmore (GE-built)
Installation Notes
⚠️ Unplug Laundry Center Before Starting — Quick Toolless Replacement Disconnect power before beginning as a general safety precaution. Locate the old control knob on the laundry center's control panel. Grip the knob firmly and pull it straight off the control shaft — it should come off with a moderate pull (no tools required). If the knob is cracked and spinning without releasing, wrap a soft cloth around it for extra grip, or gently pry it off with a plastic tool (avoid metal tools that could scratch the control panel). Once the old knob is off, inspect the metal control shaft — note the D-shape (flat side) of the shaft. If the shaft itself is damaged, worn round, or the timer behind it feels loose, the underlying timer or switch may also need attention. Align the new WE01X30638 knob's internal D-shaped receiver with the flat side of the shaft and push it firmly straight on until it seats fully. Rotate the knob through its full range to confirm it clicks into each detent position cleanly and the indicator lines up with the panel markings. Restore power and run a quick test cycle. If replacing multiple knobs, repeat for each position — they're all identical on compatible GUD27-series units. Tools needed: None (soft cloth optional).
Frequently Asked Questions
Why do the knobs on my GE laundry center keep cracking?
The original knobs on GUD27-series laundry centers are subject to constant rotational stress concentrated at the D-shaped shaft opening — and on a stacked laundry center, one control panel serves both the washer and dryer, so the knobs see roughly double the daily turning of a standalone appliance's controls. Over years of use, hairline cracks form at the shaft opening and gradually spread until the knob's grip strips and it spins freely. The replacement knob's thick inner walls and internal metal plate insert are designed to resist this failure pattern. If one of your knobs has cracked, check the others — knobs from the same production era typically crack around the same time, and replacing them together saves a repeat order.
What's the difference between WE01X30638 and WE01X24776?
These are the same control knob across production revisions. WE01X24776 was the earlier GE part number, and WE01X30638 is the current production version that GE issued as its direct replacement. Both are physically and functionally interchangeable — if your laundry center's parts diagram shows WE01X24776, the WE01X30638 is the correct current replacement, and this listing covers both numbers. There may be a very slight color variation between the new knob and your aged originals, but the fit and function are identical.
How do I remove the old knob if it's cracked and just spins?
When the internal grip has stripped, the knob spins on the shaft instead of pulling off cleanly. Wrap a soft cloth around the knob for extra grip and pull firmly straight out while wiggling slightly. If that doesn't work, gently work a plastic pry tool (a plastic putty knife or old credit card) behind the knob's base and lever it outward evenly around its circumference. Avoid metal tools, which can scratch the control panel. If the knob is badly cracked, you can also carefully break away the remaining plastic to free it from the shaft. Once removed, the new knob pushes straight on.
Does this knob work for both the washer and dryer controls on my laundry center?
Yes — on compatible GUD27-series laundry centers, the control knobs across the panel are the same part, whether they operate washer cycle selection, dryer timer, or other rotary controls that use the same D-shaped shaft. If you're replacing more than one knob, a single part number covers all matching positions. Just confirm each position's knob is the same ~2" diameter style before ordering multiples — if your unit has a visibly different-sized knob at any position, verify against the parts diagram first.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured from durable ABS plastic with an internal metal plate insert to match the dimensions (~2" diameter), D-shaped shaft receiver, snap-on installation, and appearance of the original WE01X30638/WE01X24776 control knob used in compatible GE, Hotpoint, RCA, and Kenmore GE-built laundry centers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WH02X24374 Washer Agitator Screw
The Genuine OEM GE WH02X24374 is a 1/4-20, class 2A Sinuloc screw for GE and Hotpoint washers. GE catalogs it as "Screw, 1/4-20, 2A Sinuloc," and retailers list it for agitator repairs, where it is commonly replaced along with the agitator or agitator base. A missing, stripped, or damaged screw can leave the agitator loose or keep the washer from agitating properly.
This is the original GE part. Retailers do not agree on exactly where the screw is used, so check your model's parts diagram to confirm that it is the screw your washer calls for.
Quick Answer
The Genuine OEM WH02X24374 Agitator Screw replaces a lost, stripped, or damaged 1/4-20 screw on a GE or Hotpoint washer, most often during an agitator repair. Classic symptom: the washer will not agitate, or the agitator is loose, and the old screw is missing or has stripped threads.
Common Problems This Part Fixes
Washer will not agitate
Loose or wobbling agitator
Missing screw after an agitator or agitator base repair
Stripped, damaged, or corroded screw threads
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This screw directly replaces the following part numbers:
WH02X24374, 4587952, AGE26439, AP6027539, EAP11759130, PD00042816, PS11759130
Confirm against your washer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This screw is listed for GE and Hotpoint washers, including these examples:
GE GTW220ACK1WW, GTW330ASK4WW, GTW335ASN0WW, GTW385ASW0WS
GE GTW460ASJ3WW, GTW460AMJ0WW, 5TW4307SW0WS, ETW485ASW0WB
Hotpoint HTW200ASK4WW, HTW240ASK6WS
Note: The models above are a small sample of a longer list, not a full list. Check your model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE screw for GE and Hotpoint washers
1/4-20 thread, class 2A
Often replaced along with the agitator or agitator base
Easy repair, typically under an hour
Product Specifications
Part Number
WH02X24374
OEM Part Number
WH02X24374
Part Type
Washer Screw (Agitator Repair)
Thread
1/4-20, Class 2A
Condition
Genuine OEM
Application
GE & Hotpoint Washers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the washer before beginning, and wear work gloves to protect your hands. Follow your model's service guide to reach the screw, thread the new screw into position, and tighten it firmly without over-tightening, which can strip the threads. If you are replacing an agitator or agitator base, install the screw as shown in your model's parts diagram.
Frequently Asked Questions
Is this the screw that holds my agitator on?
Retailers list it for agitator repairs and often sell it with the agitator, but they do not all spell out its exact location. Check your model's parts diagram or contact our support team before ordering.
What size is this screw?
It is a 1/4-20, class 2A screw. The length is not listed by the retailers we checked, so compare it to your old screw.
How many screws are included?
Retailers sell it as a single part, but do not state a pack count. Contact our support team if you need to confirm the quantity.
Will this fit my washer?
It is listed for many GE and Hotpoint washers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
