Search results for "convection motor"

WR84X10055 Genuine OEM Condenser Fan Motor Genuine GE part. GE brands include General Electric, Hotpoint, RCA, and others. Cross Reference Information: WR84X10055, 1093723, AH967775, EA967775, AP3797248, PS967775.     WARNING: California’s Proposition 65 (California Residents Only)

Read more less

WR60X10209 (OE) Refrigerator Condenser Fan Motor The WR60X10209 is an OE (Original Equipment) DC condenser fan motor for GE refrigerators. This motor lives in the compressor/machine compartment at the back or bottom of the refrigerator. Whenever the compressor runs, this fan runs right along with it, circulating air across the condenser coils to help dissipate heat from the hot refrigerant before it moves on to the evaporator, keeping the compressor from overheating and the whole system running efficiently. Rated 11.3V DC, 2.2W, with a 4-pin plastic plug carrying 4 wires (white, blue, red, and yellow). The motor shaft measures 1/8" in diameter and 2-7/8" long. Common failure causes include worn motor bearings, dirty or obstructed condenser coils forcing the motor to work harder than intended, and general electrical wear. Symptoms include increased noise when the freezer door is opened, warm temperatures inside the refrigerator, and — left unaddressed — compressor overheating and food spoilage from a refrigerator that can no longer maintain temperature. It directly replaces WR60X10042, WR60X10053, WR60X10065, WR60X10080, WR60X10081, WR60X10155, WR60X10216, WR60X24483, AP4265957, and PS1483567. Quick Answer The WR60X10209 (OE) Refrigerator Condenser Fan Motor fixes GE, Hotpoint, RCA, and select Kenmore refrigerators with increased noise near the compressor compartment, warm temperatures inside the fridge, or early signs of compressor overheating. 11.3V DC, 2.2W, 4-pin/4-wire plug, 1/8" x 2-7/8" shaft. Replaces WR60X10042, WR60X10053, WR60X10065, WR60X10080, WR60X10081, WR60X10155, WR60X10216, WR60X24483, AP4265957, PS1483567. This is the 12V DC condenser fan — if your refrigerator needs a 120V motor, see our WR60X10220 listing instead. Common Problems This Part Fixes Increased noise near the compressor compartment or when the freezer door is opened Warm temperatures inside the refrigerator Refrigerator running constantly as it struggles to maintain temperature Compressor overheating from restricted airflow around the condenser coils Food spoilage from a refrigerator that can't hold a consistent temperature Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand What Is an OE Part? OE (Original Equipment) means this part is manufactured by the same original supplier that produces the Genuine OEM version — identical fit, materials, and performance. The only difference is packaging: OE parts ship under our XPARTCO brand rather than the appliance manufacturer's branded box, which is why they can't be listed as Genuine OEM. You get factory-original quality at a more affordable price. Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator condenser fan motor directly replaces the following OEM and cross-reference part numbers: WR60X10209, 1195784, WR60X10042, WR60X10053, WR60X10065, WR60X10080, WR60X10081, WR60X10155, WR60X10216, 045900390950, 197D2407P013, AGE29194, AH1483567, EA1483567, EAP1483567, AP4265957, PD00001176, PS1483567. The motor's own sticker also references production number 197D2407P013. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This condenser fan motor is compatible with select GE and Hotpoint refrigerators, and also fits select RCA and Kenmore refrigerators built on the GE platform. Note — 12V DC, not 120V: This is the 12V DC condenser fan motor. If your refrigerator calls for a 120V motor instead, you need our WR60X10220 listing. This is also a condenser fan (cools the compressor and condenser coils), not an evaporator fan (circulates cold air to the food compartments) — a different part from our WR60X10074, WR60X10185, and WR60X10318 evaporator fan motor listings. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs. Key Features OE (Original Equipment) condenser fan motor — draws air across the condenser coils to cool the refrigerant and compressor Resolves "noise near the compressor," "warm fridge temperatures," and "compressor overheating" symptoms caused by fan failure Rated 11.3V DC, 2.2W 4-pin plastic plug with 4 wires (white, blue, red, yellow) 1/8" diameter x 2-7/8" long shaft Direct drop-in replacement matching the original mounting and blade fitment Replaces WR60X10042, WR60X10053, WR60X10065, WR60X10080, WR60X10081, WR60X10155, WR60X10216, WR60X24483, AP4265957, and PS1483567 Compatible with GE, Hotpoint, RCA, and select Kenmore refrigerators Product Specifications Part Number WR60X10209 Designation OE (Original Equipment) Part Type Refrigerator DC Condenser Fan Motor Brand GE Location Compressor/machine compartment (back or bottom of cabinet) Function Cools the condenser coils and compressor Voltage 11.3V DC Wattage 2.2 W Connector 4-pin plastic plug, 4-wire (white, blue, red, yellow) Shaft 1/8" diameter x 2-7/8" long Quantity 1 fan motor Compatible Brands GE, Hotpoint, RCA, Kenmore Installation Notes ⚠️ Danger — Authorized Service Part Required For Flammable Refrigerant Systems GE's own service guidance carries an explicit warning for this component: it is a manufacturer-authorized service part intended for use in refrigerator models that use a flammable refrigerant, such as R600a. Using an unauthorized or incorrectly rated service part in a unit that uses a flammable refrigerant could lead to a risk of fire or explosion. Before ordering or installing, confirm your refrigerator's refrigerant type and verify this part is correct for your specific model. If you have any doubt about your refrigerant type or the correct part for your unit, contact our support team with your model number before proceeding, or have a qualified appliance technician perform this repair. ⚠️ Unplug Refrigerator Before Starting Shut off power at the circuit breaker or fuse box, then pull the refrigerator away from the wall and disconnect the power cord from the outlet. Wear work gloves. Remove the condenser fan motor cover, typically held on by two screws, to access the motor. Before condemning the motor, clear away any dust, lint, or debris built up around the condenser coils and fan blade — restricted airflow from a dirty coil produces symptoms similar to a failing motor and costs nothing to rule out. Photograph the wiring and the fan blade's position before disconnecting anything. Disconnect the 4-pin plug from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Mount the new WR60X10209 in the same position, reconnect the 4-pin plug fully, and confirm the blade spins freely by hand without contacting the housing before reinstalling the fan cover. Restore power and monitor the refrigerator over the next 24 hours to confirm normal, even cooling has returned. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions Why is there a fire/explosion warning on this part? Some refrigerators use a flammable refrigerant, such as R600a (isobutane), instead of older non-flammable refrigerants. Electrical components like fan motors sit near refrigerant lines and can be a source of ignition if a leak were ever present, which is why GE specifically requires an authorized, correctly rated service part for these systems rather than a generic substitute. This isn't a concern unique to this listing — it reflects GE's general guidance for electrical components used in flammable-refrigerant refrigerators, and confirming your model and refrigerant type before ordering is the appropriate precaution. My refrigerator is noisy and runs warm. Is this the condenser fan? It's a strong possibility, especially if the noise seems to come from the back or bottom of the unit and you notice both symptoms together. Without proper airflow across the condenser coils, heat builds up in the machine compartment, which reduces the whole refrigeration cycle's efficiency and shows up as warmer-than-normal temperatures throughout the fridge. Could dirty condenser coils cause the same symptoms as a bad fan motor? Yes, and it's worth checking before you buy a new motor. A condenser fan pushing air through coils caked in dust, pet hair, or debris will struggle to cool the system properly even if the motor itself is working fine. Clean the coils and the fan blade thoroughly first; if the fan still doesn't spin freely, spins with a wobble, or doesn't run at all afterward, the motor itself has failed and this replacement is the correct fix. Is this a genuine OEM part? This is an OE (Original Equipment) part sold under our XPARTCO brand. OE parts are manufactured by the same original supplier that produces the Genuine OEM part, so the fit, materials, and performance are identical — the difference is that OE parts ship in XPARTCO packaging rather than the appliance manufacturer's branded box, which is why we can't list them as Genuine OEM. This gives you factory-original quality at a more affordable price than the branded version. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ OE (Original Equipment) Quality ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO W10124096 Refrigerator Condenser Fan Motor The XPARTCO W10124096 is an aftermarket replacement condenser fan motor kit for Whirlpool-built refrigerators, including Kenmore, Maytag, KitchenAid, Amana, and Jenn-Air models. The condenser fan motor pulls air across the condenser coils to carry heat away from the refrigerant. When the motor wears out or fails, the refrigerator may run warmer than normal, cool poorly, or make unusual noise. The kit includes the fan motor, a fan blade, and a jumper wire harness for installations where the original motor used a 3-pin connector. It replaces many earlier Whirlpool motor numbers, so the new kit may look different from your original motor. This is the condenser fan, near the compressor, not the evaporator fan inside the freezer or fresh food compartment. Quick Answer The XPARTCO W10124096 Condenser Fan Motor Kit fixes a Whirlpool-built refrigerator that runs warm, cools poorly, or makes noise because the condenser fan motor has failed. Kit includes the motor, fan blade, and jumper harness. Classic symptom: the compressor area is noisy, or the condenser fan doesn't spin while the compressor runs. Common Problems This Part Fixes Refrigerator running warmer than usual or cooling poorly Noisy refrigerator near the compressor Condenser fan not running Worn or damaged condenser fan motor or blade Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This condenser fan motor kit directly replaces the following part numbers: W10124096, 1378525, 2188538, 2188727, 2188728, 2188729, 2188732, 2188891, 2206005, 2315538, 2315558, W10124096VP, W10130108, W10204250, W10509333, W10861645, AH1957416, AP4318657, AWP40429, EA1957416, EAP1957416, PD00002509, PS1957416 These numbers span several generations of Whirlpool's own part numbering for this motor. Confirm against your refrigerator's parts diagram, or contact our support team, if your model calls out a different number. Compatibility This condenser fan motor kit is listed for Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Estate, Inglis, and Jenn-Air refrigerators, including these examples: Models ED5FHAXSB03, 8ET1FTKXKT05, GI15NDXTB0, 7GD27DIXHB00 Models 10644022600, 10653254200, BRS62ABANA00, MSD2658KES02 Note: The models above are a small sample of a list of hundreds, not a full list. Some retailer lists include drawer and bin models, so verify fit with your full model number. Contact our support team to confirm fit before ordering. Key Features Aftermarket replacement condenser fan motor kit for Whirlpool-built refrigerators Kit includes the fan motor, fan blade, and a jumper wire harness for 3-pin connectors Moves air across the condenser coils to help the refrigerator cool Resolves warm-running and noise problems caused by a failed motor Replaces 13 earlier Whirlpool part numbers Product Specifications Part Number XPW10124096 OEM Part Number W10124096 Part Type Refrigerator Condenser Fan Motor Kit Condition Aftermarket Replacement Kit Includes Fan Motor, Fan Blade, Jumper Wire Harness Application Whirlpool, Kenmore, Maytag, KitchenAid, Amana & Jenn-Air Refrigerators Installation Notes ⚠️ Unplug Power Before Installing Unplug the refrigerator before beginning, and move perishable food to a cooler or another refrigerator. Wear work gloves. Follow your model's service guide to reach the condenser fan, which is near the compressor. Note how the wiring is connected, disconnect it, and remove the old motor and blade. Fit the new motor and blade in the same position and reconnect the wiring. Use the supplied jumper harness only if your original motor used a 3-pin connector. Restore power and check that the fan runs. Frequently Asked Questions My refrigerator is running warm. Is this the part I need? A failed condenser fan motor is one possible cause, since the condenser can't shed heat without airflow. Check that the condenser coils are clean and that the fan turns freely. If the fan doesn't run or the motor is noisy or worn, this kit is the repair. Is this the condenser fan or the evaporator fan? This is the condenser fan motor, which cools the condenser coils near the compressor. The evaporator fan is a different part located inside the cabinet. Check your parts diagram if you are unsure. When do I use the jumper wire harness? The kit includes a jumper harness for installations where the original motor used a 3-pin connector. If your original connector is different, compare it to the new motor, or contact our support team. Will this fit my refrigerator? It is listed for hundreds of Whirlpool-built refrigerators, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

EAU63923601 Refrigerator Condenser Fan Motor - Compatible with LG, Haier, Kenmore/Sears Refrigerators Product Description Keep your refrigerator cool and efficient with the replacement EAU63923601 Refrigerator Condenser Fan Motor from Parts-O-Matic. This high-quality motor, designed for LG, Haier, and Kenmore/Sears refrigerators, circulates air across the condenser coil to dissipate heat, ensuring optimal cooling performance. Made with durable ABS plastic and metal components (DC 12V, 1A, 4-wire 4-pin), this motor addresses issues like overheating, noisy operation, poor cooling, or fan failure. Note: Includes one condenser fan motor. Disconnect power before installation. Take photos of wiring during disassembly for accurate replacement. Replaces part numbers: EAU63923601, ODM-001F-4A, LFXS26596S, 4877337, AP6317195, PS12383669, EAP12383669, PD00046601, EAU63923604 Compatibility: Compatible with models including but not limited to: LG: LFXS28968S, LFXS28968S/00, LMXS28626S, LMXS28626S/00, LFXS26596S, LRMDS3006S, LMWS27626S, LRFVS3006D Haier: Select models requiring EAU63923601 or compatible condenser fan motors Kenmore/Sears: Select models requiring EAU63923601 or compatible condenser fan motors Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select LG, Haier, and Kenmore/Sears refrigerator models. 🔥 Specifications: replacement condenser fan motor, DC 12V, 1A, 4-wire 4-pin connector, shaft length 46mm, shaft diameter 3mm, line length 72cm (28.34in), ABS plastic/metal construction, 3.15" x 3.15" x 2.76", 5.29 oz. 💰 Cost-Effective Alternative: replacement motor offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires Phillips screwdriver, flathead screwdriver, work gloves; typically installed in 30–60 minutes. 🛡️ Reliable Fixes: Resolves issues like refrigerator overheating, excessive noise, poor cooling, or fan failure. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Restore your refrigerator’s cooling efficiency today! Add to cart now for a budget-friendly fix!

Read more less

XPARTCO 4681JB1029B Refrigerator Condenser Fan Motor 13Vdc, 1.55W, 120mA, CCW. Fits specific LG refrigerator models. Replaces Part Numbers: 4681JB1029B, 4681JB1017B, 4681JB1017E, 4681JB1027B, AP4437343, OEM17749374, PS3523329. Description: This Condenser Fan Motor is a replacement part for specific LG, Kenmore refrigerator models. This motor is responsible for powering the fan that cools the condenser coils, which helps dissipate heat from the refrigerator. Proper functioning of the condenser fan motor is crucial for maintaining the efficiency and cooling performance of the refrigerator.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

EAU63923602 Refrigerator Genuine OEM Condenser Fan Motor – Compatible with LG & Kenmore Refrigerators Product Description Restore proper airflow and efficient cooling with the EAU63923602 Refrigerator Genuine OEM Condenser Fan Motor. This factory-approved motor circulates air across the condenser coils to help dissipate heat from the refrigeration system. A failed condenser fan motor can cause the refrigerator to run warm, overheat, make loud noises, or stop cooling efficiently. Installing this Genuine OEM condenser fan motor ensures exact fit, quiet operation, and long-lasting performance. Replaces Part Numbers EAU63923602, ODM-001F-4B, PD00057884, EAP12383670, AP6317196, 4877338, PS12383670. Compatibility This Genuine OEM condenser fan motor fits select LG and Kenmore (LG-manufactured) refrigerators. Example compatible models include (but are not limited to):LG LFXS24623S, LFXC24726SKenmore 795.71033.010, 795.74023.411 Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🧩 Genuine OEM Replacement – Factory-certified for exact fit and reliability 🌬️ Restores Proper Airflow – Cools condenser coils for efficient operation 🔇 Quiet Performance – Smooth motor design reduces noise and vibration 💪 OEM-Grade Durability – Built for continuous operation in warm environments 🛡️ Fixes Common Issues – Solves warm temperatures, overheating, or loud fan noise 📐 Product Specification Part Number: EAU63923602 Component Type: Refrigerator Condenser Fan Motor Voltage: 120V AC Mounting: Rear lower condenser fan assembly Rotation: OEM-matched direction Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Unplug the refrigerator before servicing. Condenser components may be hot—allow time to cool. Steps: Disconnect power and remove the rear lower access panel. Locate the condenser fan motor assembly. Disconnect the wiring harness and remove mounting screws. Install the new EAU63923602 motor in the same position. Reconnect wiring, reinstall the panel, and restore power. Confirm proper fan operation and airflow. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Genuine OEM Replacement Part 🔄 30-Day Return Policy Restore efficient refrigerator cooling with confidence — Add to Cart Now for a factory-quality repair!

Read more less

W10633627 Refrigerator Genuine OEM Evaporator Fan Motor – Compatible with Whirlpool, Maytag, Amana, KitchenAid, and Jenn-Air Refrigerators Product Description Keep your refrigerator cooling efficiently with the W10633627 Refrigerator Genuine OEM Evaporator Fan Motor. This factory-approved fan motor circulates cold air throughout the refrigerator and freezer compartments, maintaining consistent temperatures and preventing frost buildup. A failing fan motor can cause uneven cooling, temperature fluctuations, or unusual noises. Replacing it with this genuine OEM part restores quiet, efficient performance and reliable cooling. Replaces Part Numbers W10633627, 3023615, W10395278, W10673906, W10724602, W10798934, PD00005920, EAP8691851, AP5781863, PS8691851. Compatibility This genuine evaporator fan motor is compatible with select Whirlpool, Maytag, Amana, KitchenAid, and Jenn-Air refrigerators. Example compatible models include (but are not limited to): Whirlpool WRS325SDHZ01, Maytag MFF2558FEZ04, and KitchenAid KRFF507HPS00. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Replacement – Factory-approved evaporator fan motor for Whirlpool-brand refrigerators ❄️ Improves Air Circulation – Ensures consistent cooling across all compartments 💰 Long-Lasting Performance – OEM-tested for quality and reliability 🛠️ Easy Installation – Installs in under 30 minutes with basic tools 🛡️ Fixes Common Issues – Resolves poor cooling, noisy operation, or frost buildup 📐 Product Specification Part Number: W10633627 Component Type: Refrigerator Evaporator Fan Motor Material: Durable plastic housing with precision-balanced motor Mounting: Direct-fit replacement for rear freezer panel Operating Conditions: Designed for refrigerator and freezer use Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the refrigerator before beginning repairs to avoid electrical shock. Steps: Unplug refrigerator and remove freezer shelves. Take off the rear panel inside the freezer compartment. Disconnect wiring harness from the old fan motor. Remove mounting screws and replace with the new W10633627 fan motor. Reconnect wiring, reinstall the rear panel, and restore power. Confirm that the fan runs quietly and air circulation is restored. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Keep your refrigerator cooling efficiently — Add to Cart Now for a genuine, factory-approved repair! 

Read more less

WR60X10257 (OE) Refrigerator Evaporator Fan Motor The WR60X10257 is an OE (Original Equipment) evaporator fan motor, also known as an AC/DC fan motor, for GE and Hotpoint refrigerators. Located at the back of the freezer, this motor circulates air across the evaporator coils, which convert refrigerant into cooling capacity — the fan is what carries that cold air into both the freezer and fresh food compartments. Rated 115V, 60Hz, 2.4W. Common failure causes include worn motor bearings and general electrical wear. A failing motor produces a recognizable symptom: the freezer may stay reasonably cold while the fresh food section runs warm, since the fresh food compartment depends entirely on this fan to receive circulated cold air. Other symptoms include unusual noise from the freezer or inconsistent cooling overall. It directly replaces 1373246, 200D5001P003, AP4318644, EAP1766252, PS1766252, AH1766252, UDQR002GNL, WR60X10129, AGE29237, and PD00028496. Quick Answer The WR60X10257 (OE) Refrigerator Evaporator Fan Motor fixes GE and Hotpoint refrigerators where the freezer stays cold but the fresh food section runs warm, there's unusual noise from the freezer, or cooling is inconsistent. 115V, 60Hz, 2.4W. Replaces 1373246, 200D5001P003, AP4318644, EAP1766252, PS1766252, AH1766252, UDQR002GNL, WR60X10129, AGE29237, PD00028496. This is a 115V AC-powered motor — a different design from the 9.75V DC evaporator fan motors in our WR60X10074, WR60X10185, and WR60X10318 listings. Always match your original motor's voltage type before ordering. Common Problems This Part Fixes Freezer stays cold but the fresh food compartment runs warm Refrigerator or freezer sections too warm overall Unusual noise — humming, buzzing, or grinding — coming from the freezer Inconsistent or fluctuating refrigerator temperatures Refrigerator running constantly as it struggles to maintain temperature Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand What Is an OE Part? OE (Original Equipment) means this part is manufactured by the same original supplier that produces the Genuine OEM version — identical fit, materials, and performance. The only difference is packaging: OE parts ship under our XPARTCO brand rather than the appliance manufacturer's branded box, which is why they can't be listed as Genuine OEM. You get factory-original quality at a more affordable price. Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers: WR60X10257, 1373246, 200D5001P003, UDQR002GNL, WR60X10129, AP4318644, EAP1766252, PS1766252, AGE29237, PD00028496 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This evaporator fan motor is compatible with select GE and Hotpoint refrigerators, and also fits select Haier, Monogram, and Café refrigerators built on the GE platform, including model numbers such as ETS22SBPARBS, ETS22SBSARSS, and GTS22FBPBRWW. Note — 115V AC, not 9.75V DC: This motor is a different design and voltage class from the DC evaporator fan motors used on other GE refrigerator platforms, including our WR60X10074, WR60X10185, and WR60X10318 listings (all 9.75V DC). Check your old motor's voltage rating, printed on the motor itself, before ordering — a DC motor and this AC motor are not interchangeable. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs. Key Features OE (Original Equipment) evaporator fan motor, also known as an AC/DC fan motor Circulates air across the evaporator coils to cool the freezer and fresh food compartments Resolves "freezer cold but fridge warm," "unusual noise," and "inconsistent cooling" symptoms caused by fan motor failure Rated 115V, 60Hz, 2.4W Direct drop-in replacement matching the original mounting and blade fitment Replaces 1373246, 200D5001P003, AP4318644, EAP1766252, PS1766252, AH1766252, UDQR002GNL, WR60X10129, AGE29237, and PD00028496 Compatible with GE, Hotpoint, Haier, Monogram, and Café refrigerators OE (Original Equipment) — manufactured by the same original supplier as the Genuine OEM part Product Specifications Part Number WR60X10257-OE Part Type Refrigerator Evaporator Fan Motor Designation OE (Original Equipment) Compatible Brand GE Location Back of the freezer, over the evaporator coils Voltage 115V AC Frequency 60 Hz Wattage 2.4 W Dimensions 4"H x 2-3/4"W x 17"D Quantity 1 fan motor Compatible Brands GE, Hotpoint, Haier, Monogram, Café Installation Notes ⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Access is typically through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator coil and fan assembly. If there's significant frost or ice around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the wiring harness connector from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new WR60X10257 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions My freezer is cold but the fridge section is warm. Is this the right part? Yes, this is a very common and telling symptom pattern. The freezer sits close to the evaporator coil and can stay reasonably cold through proximity even with weakening air circulation, but the fresh food compartment depends entirely on this fan pushing cold air through the ducting to reach it. When the fan motor fails or slows down, the fresh food side is usually the first and most noticeably affected area. How do I know if I need this 115V motor or one of your DC motors? Check the voltage rating printed directly on your old motor before ordering. This WR60X10257 is a 115V AC-powered motor, while our WR60X10074, WR60X10185, and WR60X10318 listings are all 9.75V DC motors used on different GE refrigerator generations. The two motor types are not interchangeable, so matching the voltage rating on your original motor is the most reliable way to confirm which one you need. Is this a genuine OEM part? This is an OE (Original Equipment) part sold under our XPARTCO brand. OE parts are manufactured by the same original supplier that produces the Genuine OEM part, so the fit, materials, and performance are identical — the difference is that OE parts ship in XPARTCO packaging rather than the appliance manufacturer's branded box, which is why we can't list them as Genuine OEM. This gives you factory-original quality at a more affordable price than the branded version. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ OE (Original Equipment) Quality ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO W10464673 Refrigerator Evaporator Fan Motor Replaces WPW10464673 The XPARTCO W10464673 is an aftermarket replacement refrigerator evaporator fan motor compatible with select Whirlpool, KitchenAid, Maytag, Kenmore, and Ikea bottom-freezer and French door refrigerators. The evaporator fan motor is located inside the freezer compartment and circulates cold air from the evaporator coils throughout both the freezer and fresh food sections. Without the evaporator fan running, cold air cannot be distributed — even if the compressor and evaporator are working correctly, both compartments will gradually warm up. A failed evaporator fan motor is one of the most common causes of a refrigerator that runs but does not cool. Rated 115V, 60Hz with a 2-pin connector, this motor features a 14mm shaft length, 3mm shaft diameter, and approximately 13cm (5.1") of wire lead. It is constructed from ABS plastic housing with a metal motor core. It directly replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167, and EAP11755167. Compatible models include KitchenAid KFFS and KRFF series, Maytag MFB and MFF series, and several Kenmore 106/596-series models. Installs in 20–30 minutes with basic hand tools. Quick Answer The XPARTCO W10464673 Refrigerator Evaporator Fan Motor fixes refrigerators where both compartments are too warm, the refrigerator runs but doesn't cool, or there is unusual noise from inside the freezer. 115V/60Hz, 2-pin connector, 14mm shaft, 3mm shaft diameter, 13cm leads. ABS/metal construction. Compatible with KitchenAid KFFS/KRFF, Maytag MFB/MFF, Whirlpool, and Kenmore 106/596-series. Replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167. Common Problems This Part Fixes Both refrigerator and freezer compartments too warm — evaporator fan not circulating cold air Refrigerator running continuously but not cooling — compressor on but no air circulation Freezer section cold but fresh food section warm — fan not moving air between compartments Unusual buzzing, squealing, or grinding noise coming from inside the freezer No airflow felt inside the refrigerator or freezer when the compressor is running Fan blade visible inside the freezer but not spinning when the compressor runs Ice buildup on the evaporator coils causing the fan blade to stop Replaces Part Numbers This evaporator fan motor directly replaces the following OEM and cross-reference part numbers: WPW10464673, W10464673, 3020513, AWP50481, EAP11755167, PD00030978, AP6021839, PS11755167, FDQC16WP2A. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This evaporator fan motor is compatible with select refrigerators from the following brands and series: KitchenAid refrigerators — KFFS20 and KRFF300 series (KFFS20EYMS02, KFFS20EYBL02, KFFS20EYBL04, KRFF300EBL00, KRFF300EBS00 and related models) Maytag refrigerators — MFB2055 and MFF2055 series (MFB2055YEB01, MFB2055YEB02, MFB2055YEM01, MFB2055YEM02, MFB2055YEW02, MFF2055DRE00, MFF2055YEB02, MFF2055YEW00, MFW2055FRH00, MFB2055FRW00 and related models) Whirlpool refrigerators (select bottom-freezer and French door models) Kenmore / Sears refrigerators — 106 series and 596 series (10673002510, 10673002511, 10673003510, 10673003511, 59673002510, 59673003510, 59673003511, 59673009510, 10679472411, 10679473411 and related models) Ikea refrigerators (select models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Circulates cold air from the evaporator coils throughout the freezer and fresh food compartments — essential for maintaining set temperatures in both sections 115V, 60Hz — correct electrical specifications for compatible models 2-pin connector — direct plug-in replacement on compatible models Shaft: 14mm length, 3mm diameter — matches original motor shaft dimensions for fan blade compatibility Wire lead length: approximately 13cm (5.1 inches) ABS plastic housing with metal motor core — durable and designed for continuous freezer-temperature operation Replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167, and FDQC16WP2A Compatible with KitchenAid KFFS/KRFF, Maytag MFB/MFF, Kenmore 106/596, Whirlpool, and Ikea refrigerators Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 20–30 minutes with basic hand tools Product Specifications Part Number W10464673 OEM Part Number WPW10464673 Part Type Refrigerator Evaporator Fan Motor Condition Aftermarket Replacement Application Bottom-Freezer and French Door Refrigerators Voltage 115V AC Frequency 60 Hz Connector 2-pin plug Shaft Length 14mm (0.55 inches) Shaft Diameter 3mm (0.12 inches) Wire Lead Length Approximately 13cm (5.1 inches) Material ABS plastic housing / Metal motor core Compatible Brands Whirlpool, KitchenAid, Maytag, Kenmore, Ikea Installation Notes ⚠️ Unplug Refrigerator and Shut Off Water Before Starting Unplug the refrigerator and shut off the water supply before beginning. Remove all food and shelving from the freezer compartment. On most compatible models, the evaporator fan is located behind the freezer back panel. Remove the screws securing the freezer back panel and carefully slide it out to expose the evaporator coils and fan assembly. If ice has built up on the fan or coils, use a hair dryer to melt it before attempting to remove the fan — do not force a frozen fan free. Disconnect the 2-pin wire connector from the old motor. Remove the fan blade by pulling it straight off the motor shaft, then unscrew the motor mounting brackets and remove the old motor. Install the new W10464673 motor in the same position, secure the mounting brackets, press the fan blade back onto the shaft, and reconnect the 2-pin connector. Reinstall the freezer back panel, restore power and water, and verify the fan runs when the compressor starts. Tools needed: Phillips screwdriver, hair dryer (if coils are iced), work gloves. Frequently Asked Questions What does the evaporator fan motor do? The evaporator fan motor drives a fan blade inside the freezer compartment that draws air across the evaporator coils — the cold coils remove heat from the air, and the fan distributes the chilled air throughout both the freezer and fresh food sections via a duct system. Without the evaporator fan running, the evaporator coils still get cold and the compressor still runs, but no cold air is circulated. This causes both compartments to gradually warm up even though the refrigeration system itself may be functioning correctly. A failed evaporator fan motor is one of the most common and most frequently misdiagnosed causes of poor refrigerator cooling. How do I know if the evaporator fan motor has failed? Open the freezer door and press the door switch (the small button or tab that tells the refrigerator the door is closed) — this should start the evaporator fan if the compressor is running. If you hear no fan noise and feel no airflow from inside the freezer with the compressor running, the fan motor has likely failed. You can also remove the freezer back panel and physically check whether the fan blade spins freely by hand — if it is stuck or wobbles, inspect for ice buildup or a seized motor bearing. If the blade spins freely but the motor does not run when powered, the motor has burned out. What is the difference between W10464673 and WPW10464673? These are the same evaporator fan motor. WPW10464673 is the updated Whirlpool OEM part number that superseded the original W10464673. The 3020513 is also a cross-reference for this same motor. This aftermarket replacement is compatible with all of these numbers. My freezer is cold but my fridge is warm — could it be the evaporator fan? Yes — this is a classic evaporator fan failure symptom. When the fan motor fails partially, the freezer may still receive some cold air passively from the evaporator, but not enough air is circulated to reach the fresh food section through the duct system. A failed evaporator fan is frequently the cause of this hot-fridge-cold-freezer pattern. Check the fan as described above — if it is not spinning, replacing the W10464673 motor will restore cooling to both compartments. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from ABS plastic and metal to match the electrical specifications and shaft dimensions of the original W10464673 evaporator fan motor. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

809069201 Refrigerator Genuine OEM Evaporator Fan Motor Fits specific Frigidaire, Electrolux refrigerator models. Description: This Evaporator Fan Motor is an OEM part for specific Frigidaire refrigerator models. It circulates air over the evaporator coils and throughout the refrigerator and freezer compartments, ensuring even cooling and maintaining the desired temperatures. Replaces Part Numbers:809069206, 809069201, AP7014188, PS16544514. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

Genuine GE WR60X10307 Refrigerator Evaporator Fan Motor - Compatible with GE, Hotpoint, RCA, Kenmore Product Description Restore efficient cooling with the Genuine GE WR60X10307 Refrigerator Evaporator Fan Motor. This OEM evaporator fan motor is designed for select GE, Hotpoint, RCA, and Kenmore refrigerators, circulating air over the evaporator coils to maintain consistent temperatures in both refrigerator and freezer compartments. It includes a 6-pin harness with a 2-wire thermistor, addressing issues like noisy operation, inconsistent temperatures, or frost buildup, delivering reliable performance as an authentic GE part. Note: Includes one evaporator fan motor with 6-pin harness and thermistor. Disconnect power before installation. Check evaporator fan blade and related components (e.g., thermistor) for optimal performance. Replaces part numbers: WR60X10307, WR60X10099, WR60X10224, WR60X30370, 197D4968G009, FDQT26GE6, PD00001317, EAP2364950, AP4438809, 1550741, PS2364950. Compatibility: Compatible with models including but not limited to: GE: 39631UGTAWW, 39631UGXAWW, 39639USTAGV, GSS25SGMDBS, GSS25WGMDBB, GSS25WGMDBB, HSS25GFPAWW, PSS26SGPASS Hotpoint: HSS25IFMDWW, HSS25IFMCCC RCA: RSG20IDMBFWW Kenmore: 363.58541890, 363.58542890 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Hotpoint, RCA, and Kenmore refrigerators. ❄️ Specifications: OEM evaporator fan motor, 9.75V DC, 3.25W, includes 6-pin harness with 2-wire thermistor. 💪 Reliable Performance: Authentic GE part ensures long-lasting durability. 🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 30–45 minutes. 🛡️ Effective Fixes: Resolves noisy operation, inconsistent temperatures, frost buildup, or refrigerator running continuously. Product Specification Part Number: Genuine GE WR60X10307 Component Type: Refrigerator evaporator fan motor Material: Plastic housing, metal motor components Electrical Specs: 9.75V DC, 3.25W Mounting: Screw-mounted in freezer compartment behind evaporator cover Operating Conditions: Suitable for low-temperature refrigerator environments Compliance: UL-listed components, Prop 65 warning for California Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your refrigerator cooling efficiently today! Add to cart now for a reliable fix!

Read more less

WR49X25197 Refrigerator Genuine OEM Axial Evaporator Motor Replaces WR60X26866 The WR49X25197 is a genuine GE OEM axial evaporator fan motor for the fresh food evaporator on select GE French door refrigerators. Unlike a standard evaporator fan motor, this is an axial-design motor purpose-built for the fresh food side of the refrigeration system, using its blade geometry to move air efficiently and quietly through that compartment's evaporator coil for precise, consistent temperature control. Rated 13.6VDC, 0.16A. Manufactured by Nidec, designation V80E14MS2A3-57A611. Over time, motor bearings wear out or the motor can fail electrically, and symptoms typically include the fresh food compartment running warm while the freezer remains unaffected, unusual noise from the fresh food evaporator area, or inconsistent cooling in that compartment specifically, since this motor doesn't serve the freezer side at all. It directly replaces WR60X26866, WR60X10341, WR60X24303, WR60X26033, WR60X10356, WR60X10357, WR60X26030, 239D1412P001, 239D1412P006, and AP6278228. Quick Answer The WR49X25197 Genuine OEM GE Axial Evaporator Motor fixes GE French door refrigerators where the fresh food compartment specifically runs warm, there's unusual noise from the fresh food evaporator area, or fresh food cooling is inconsistent while the freezer works fine. 13.6VDC, 0.16A axial motor. Replaces WR60X26866, WR60X10341, WR60X24303, WR60X26033, WR60X10356, WR60X10357, WR60X26030, 239D1412P001, 239D1412P006, AP6278228. If your refrigerator was manufactured between May 2014 and March 2015 (serial range HD–FF), the control software must also be updated by factory service or a Software Update Module (WR98R882802) for this motor to perform correctly. Common Problems This Part Fixes Fresh food compartment running warm while the freezer stays normal Unusual noise coming from the fresh food evaporator area Inconsistent or fluctuating temperature in the fresh food section specifically Fresh food evaporator fan not spinning or spinning intermittently Reduced airflow affecting fresh food cooling performance Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator axial evaporator motor directly replaces the following OEM and cross-reference part numbers: WR49X25197, WR60X26866, WR02X13733, WR60X10341, WR60X10356, WR60X10357, WR60X24303, WR60X26030, WR60X26033, V80E14MS2A3-57A611, 8817V W1, 239D1412P006, PD00038765, FIX12172983, AGE29673, AP6278228, PS12172983 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This axial evaporator motor is compatible with select GE French door refrigerators. Note — fresh food evaporator only, and a software caveat for certain units: This motor serves the fresh food evaporator specifically — a different application from a general freezer evaporator fan motor. Additionally, if your refrigerator was manufactured between May 2014 and March 2015 (serial range HD through FF), the refrigerator's control software must be updated by factory service, or with a Software Update Module (WR98R882802), for this motor to perform correctly after installation. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine GE OEM part — factory-specified axial blade design for the fresh food evaporator Resolves "fresh food running warm," "unusual noise from the fresh food evaporator," and "inconsistent fresh food cooling" symptoms Rated 13.6VDC, 0.16A Manufactured by Nidec, designation V80E14MS2A3-57A611 Direct drop-in replacement matching the original mounting and blade fitment Replaces WR60X26866, WR60X10341, WR60X24303, WR60X26033, WR60X10356, WR60X10357, WR60X26030, 239D1412P001, 239D1412P006, and AP6278228 Compatible with GE French door refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number WR49X25197 OEM Part Number WR60X26866 Part Type Axial Evaporator Fan Motor (Fresh Food) Condition Genuine OEM Brand GE Application French Door Refrigerators — Fresh Food Evaporator Voltage 13.6VDC Amperage 0.16A Motor Manufacturer Nidec (V80E14MS2A3-57A611) Motor Type Axial Software Update Caveat Required for units mfg. May 2014–March 2015, serial range HD–FF (WR98R882802) Quantity 1 evaporator motor Compatible Brand GE Installation Notes ⚠️ Unplug Refrigerator Before Starting — Check Your Manufacture Date For A Software Update Requirement Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Before starting, check your refrigerator's serial number/manufacture date sticker (typically inside the fresh food compartment) — if your unit was made between May 2014 and March 2015 with a serial range of HD through FF, plan for a control software update via factory service or a Software Update Module (WR98R882802) after installing this motor, since without it the new motor may not perform correctly. Access to the fresh food evaporator is typically through an interior panel in the fresh food compartment, separate from the freezer's evaporator access — check your model's service diagram. If there's frost or ice buildup around the fan or coil, let the unit sit unplugged with the door open for a few hours before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the wiring harness connector from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Mount the new WR49X25197 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the panel. Restore power and monitor the fresh food compartment over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions My fresh food section runs warm but the freezer is fine. Is this the right part? Yes, this is exactly the symptom pattern this motor addresses, since it's dedicated specifically to the fresh food evaporator rather than serving both compartments. If your freezer is cooling normally and only the fresh food section is warm or inconsistent, this axial motor is a strong candidate for the cause. Do I really need a software update after installing this motor? Only if your refrigerator falls into a specific manufacturing window: units made between May 2014 and March 2015, identifiable by a serial range of HD through FF. For those units, GE's own guidance states the control software must be updated by factory service or with a Software Update Module (WR98R882802) for the new motor to perform correctly. If your refrigerator falls outside that date range, this step isn't necessary — check your serial number sticker to confirm which category your unit falls into. Is this the same as a regular evaporator fan motor? Not quite — this is an axial-design motor built specifically for the fresh food evaporator on GE French door refrigerators, distinct from general evaporator fan motors that serve the freezer side or both compartments together. Always confirm your model number and which compartment's fan has failed before ordering. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original axial motor design, blade fitment, and electrical rating of the fresh food evaporator motor originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less