Search results for "microwave capacitor"

XPARTCO W10804664 Washer Motor Run Capacitor (50µF) The XPARTCO W10804664 is an aftermarket replacement motor run capacitor for Whirlpool-built top-load washers. This capacitor works alongside the washer's motor to help it start and run efficiently — it briefly boosts the voltage delivered to the motor at the moment it's commanded to start, giving it the extra push needed to overcome its own inertia and begin turning smoothly. Once the motor is running, the capacitor continues supporting steady, efficient operation for the duration of the cycle. Rated 50 MFD (µF) at 250VAC. Over time, the dielectric material inside a run capacitor breaks down from repeated startup stress and heat cycling, which reduces its effectiveness or causes it to fail outright. A failing capacitor produces a clear symptom: the washer motor hums but won't start, or the motor makes noise during use without turning properly. Left unaddressed, a struggling motor can also run hotter than normal and wear out faster than it should. It directly replaces W10278117, 4247711, W10666221, W10804664VP, AP5982844, EAP11703494, and PS11703494. Quick Answer The XPARTCO W10804664 Washer Motor Run Capacitor fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Crosley top-load washers where the motor hums but won't start, or makes noise during use without running properly. Rated 50 MFD (µF), 250VAC. Replaces W10278117, 4247711, W10666221, W10804664VP, AP5982844, EAP11703494, PS11703494. Capacitors store a dangerous electrical charge even after power is disconnected — always discharge before handling. Common Problems This Part Fixes Washer motor hums but won't start Motor makes noise during operation without turning properly Washer won't agitate or spin because the motor never gets up to speed Motor that struggles to start under load but may run fine once already spinning Washer motor running hotter than normal Cycle stalling at the start of agitation or spin Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer motor run capacitor directly replaces the following OEM and cross-reference part numbers: W10804664, W10804664VP, W10278117, 4247711, W10666221, AP5982844, EAP11703494, AWP41264, PD00024697, PS11703494 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This motor run capacitor is compatible with select Whirlpool-built top-load washers across the Whirlpool family of brands, including: Whirlpool top-load washers — including 7MWTW1750YW0, 7MWTW1750YW1, 7MWTW1950YW0, 7MWTW1950YW1 Maytag, KitchenAid, Jenn-Air, and Amana top-load washers (select models) Magic Chef, Admiral, and Norge top-load washers (select models) Roper and Crosley top-load washers (select models) Note: Whirlpool uses several different washer motor run capacitors across its platforms with similar-looking part numbers but different MFD ratings — for example, other listings cover 45 MFD (W11158830/W10625045) and different 50 MFD variants (W11395618/W10625046) used on other washer model families, none of which are interchangeable with this 50 MFD/250VAC W10804664. Always verify your full model number and match the MFD rating printed on your original capacitor before ordering. Contact our support team with your model number if you're unsure. Key Features Aftermarket replacement motor run capacitor — boosts voltage to help the washer motor start and run efficiently Rated 50 MFD (µF) at 250VAC Resolves "motor hums but won't start," "noisy motor," and "won't agitate or spin" symptoms caused by capacitor failure Direct drop-in replacement — mounts to the original bracket and wiring Replaces W10278117, 4247711, W10666221, W10804664VP, AP5982844, EAP11703494, and PS11703494 Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Crosley top-load washers Aftermarket replacement built to OEM-equivalent quality standards Straightforward repair — basic hand tools and some disassembly required Product Specifications Part Number W10804664 OEM Part Number W10804664 Part Type Washer Motor Run Capacitor Condition Aftermarket Replacement Application Top-Load Washers (Whirlpool-Built) Capacitance 50 MFD (µF) Voltage 250VAC Function Boosts voltage to the motor to support efficient starting and running Repair Difficulty Easy to Moderate — basic hand tools required Quantity 1 run capacitor Compatible Brands Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Crosley Installation Notes ⚠️ Danger — Capacitors Store A Dangerous Electrical Charge Unplug the washer or shut off the house circuit breaker before beginning. A capacitor stores an electrical charge even after power has been disconnected, and that charge can deliver a serious or fatal shock. Before touching either terminal, discharge the capacitor by shorting its two terminals together using an insulated-handle screwdriver, or by using a proper capacitor discharge tool with a resistor. Never short the terminals with a bare metal tool held with your bare hand. If you are not fully comfortable performing a capacitor discharge safely, have a qualified appliance technician replace this part instead. ⚠️ Shut Off Hot And Cold Water Supplies Before Starting Wear work gloves. In addition to disconnecting power, turn off the hot and cold water supplies before beginning disassembly. Access to the capacitor typically requires removing the washer's console and outer body panels — remove the mounting screws and release any spring clips securing the body to the frame, using a putty knife to gently pop them free. Locate the capacitor, usually mounted to the rear panel or motor bracket area. Photograph the wiring before disconnecting anything. After confirming the capacitor is fully discharged, disconnect the wire terminals from the old capacitor, remove its mounting clip or bracket, and pull it free. Install the new W10804664 capacitor in the same position, reconnect the wire terminals, and secure it in its mounting clip or bracket. Reassemble the body panels, spring clips, and console in reverse order. Restore water and power, then run a test cycle through both agitate and spin, confirming the motor starts promptly without humming or hesitation. Tools needed: putty knife, Phillips screwdriver, insulated-handle screwdriver or capacitor discharge tool, work gloves. Frequently Asked Questions My washer motor hums but won't start. Is this the right part? Yes, this is the classic symptom of a failing run capacitor. Since this capacitor's job is to boost voltage to the motor at startup, a weak or failed capacitor can leave the motor energized and humming without ever getting the push it needs to actually begin turning. How do I know I have the right MFD rating for my washer? Check the rating printed directly on your original capacitor's body — this listing is specifically 50 MFD at 250VAC. Whirlpool uses several different run capacitors across its washer platforms, including a 45 MFD version and other 50 MFD variants with different part numbers, and installing the wrong rating can leave the motor under- or over-supported. If you're not sure, contact our support team with your model number. Do I need to shut off the water supply just to replace a capacitor? It's a precaution taken because accessing this capacitor typically requires removing the washer's outer body and console, which involves working around the same general area as the water inlet connections. Shutting off the water first prevents any accidental spills or pressure issues while the body is open, even though you won't necessarily be disconnecting the water lines themselves for this specific repair. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the 50 MFD, 250VAC electrical rating and mounting configuration of the original W10804664 run capacitor used in compatible Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and related top-load washers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

LCD30+5X440 HVAC OVAL DUAL RUN CAPACITOR Engineered by an ISO manufacturer with over twenty years' experience in OEM capacitor fabrication, Linebacker® capacitors are manufactured by the OEM factory and are 100% in-line production tested to the same rigorous standards. Features/Benefits 10,000 AFC pressure sensitive short circuit interrupting capability 3-year warranty from the date of purchase Continuous life tested, oil leak tested and dielectric tested for insulation effectiveness Life tested to 85° C operating temperature for 10,000 cycles Manufactured with thick polypropylene foil to handle increased operating temperatures Meets EIA-456A accelerated life test at 70° C for 60,000 hours PCB-free oil to prevent over-heating UL File # E352486 US and Canada UL approved (C22.2NO.190) Specification: Voltage: Up to 440 VAC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Foil Thickness: 6.0 µm +/- 5% Standard Tolerance: +/- 5% MFD Value: 30+5 Style: Oval Size: 2.8x1.77x3.54

Read more less

XPARTCO WB24X10190 Microwave Door Switch – Compatible with GE, Hotpoint, and RCA Microwaves Product Description Restore safe and reliable microwave operation with the XPARTCO WB24X10190 Microwave Door Switch. This high-quality replacement detects when the microwave door is closed, allowing power to flow safely to the control board. A faulty door switch can cause the microwave not to start, stop mid-cycle, or run with the door open. Installing this durable replacement ensures proper safety interlock function and restores dependable performance. Replaces Part Numbers WB24X10190, 1810589, AH3486598, PD00054718, EAP3486598, EA3486598, AP4980350, PS3486598. Compatibility This replacement door switch fits select GE, Hotpoint, and RCA microwave models. Example compatible models include (but are not limited to): GE JVM1540LM1CS, GE JVM6175DK1WW, and Hotpoint RVM1535DM1BB. Always verify your microwave’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM safety and performance standards ⚡ Restores Safe Operation – Ensures microwave runs only when the door is properly closed 💰 Affordable Solution – High-quality part at a lower price than OEM versions 🛠️ Quick Installation – Direct-fit replacement installs in minutes with basic tools 🛡️ Fixes Common Issues – Resolves microwaves not starting, stopping mid-cycle, or running with the door open 📐 Product Specification Part Number: WB24X10190 Component Type: Microwave Door Interlock Switch Material: Heat-resistant plastic housing with metal terminals Mounting: Snap-in style for interlock bracket assembly Operating Conditions: Rated for high-voltage microwave circuits Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, flathead screwdriver ⚠️ Safety First: Unplug the microwave before servicing. Capacitors can retain high voltage even when unplugged — use caution or contact a qualified technician. Steps: Unplug the microwave and remove the outer cover. Locate the door latch assembly and access the switch bracket. Disconnect the wiring harness and release the old switch from the bracket. Install the new XPARTCO WB24X10190 switch in the same orientation. Reconnect wires, reinstall the cover, and test operation. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore your microwave’s safety and performance — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

Genuine Samsung OEM Part DE96-00414A Microwave Door Latch and Switch Assembly Genuine Samsung OEM latch-body assembly with the three door-interlock switches installed. Product Overview The Samsung DE96-00414A Microwave Door Latch and Switch Assembly is the complete latch-body assembly used to hold and actuate the microwave door-interlock switches. It includes the plastic latch body and three switches that monitor door position and help prevent microwave operation when the door is not properly closed. This is a Genuine Samsung OEM part, not an aftermarket replacement. Quick Answer DE96-00414A is a Genuine Samsung OEM microwave latch-body and switch assembly. It comes with all three interlock switches already mounted to the latch body. It may correct symptoms such as a microwave that will not start, stops unexpectedly, or continues operating components when the door is opened. Common Problems This Part May Fix Microwave will not start with the door closed Microwave stops after a few seconds Fan or turntable behaves incorrectly when the door opens Door-interlock switch failure Damaged or worn switch-holder/latch body Intermittent operation caused by door-switch alignment Replaces and Cross-References DE96-00414A, 2086776, AP4237456, EAP4239694, PS4239694, ASM37650, OEM12712377, PD00008525. Use the complete microwave model number and revision when confirming fitment. Compatibility Used on select Samsung-built microwave and microwave/hood-combination models, plus certain Kenmore and Maytag units built on the same platform. Confirmed examples include: SMH1816S/XAA SMH1622W/XAA-01 ME16H702SES/AA ME17H703SHS/AA-01 ME16K3000AS/AA SMH9207ST/XAA SMH8165ST/XAA 401.80082010 401.85042010 Partial model list only. Samsung microwave models can have revision-specific parts. Verify the full model and revision from the appliance label before ordering. Key Features Genuine Samsung OEM assembly Complete latch body / switch holder Includes three door-interlock switches Maintains proper door-switch alignment Designed for select Samsung-built microwave platforms Product Specifications Part Number DE96-00414A Brand Samsung Part Type Microwave Door Latch and Switch Assembly Condition New Part Quality Genuine OEM Included Latch body plus 3 interlock switches Application Microwave door-interlock system Quantity 1 Assembly Microwave Safety / Installation Notes Microwave ovens contain lethal high-voltage components. The high-voltage capacitor may retain a dangerous charge even when the microwave is unplugged. Door-interlock systems are critical safety devices and must never be bypassed or defeated. Disconnect power before service. Have a qualified microwave technician replace this assembly. Confirm each switch and latch is correctly aligned and actuated. After service, perform the manufacturer-required door-interlock and shielding/leakage safety checks before returning the microwave to use. Frequently Asked Questions Does DE96-00414A include the switches? Yes. The assembly includes the latch body and three door-interlock switches. Is this a Genuine Samsung OEM part? Yes. DE96-00414A is a Genuine Samsung OEM assembly. Can I replace only one switch? Individual switches may be serviceable on some models, but DE96-00414A is supplied as the complete latch-body and three-switch assembly. Follow the service procedure for the exact model. Can I bypass a bad door switch? No. Never bypass or defeat a microwave door-interlock switch. The interlock system is a critical safety feature. Shop With Confidence Verify the complete microwave model number and revision before ordering. This listing is for a Genuine Samsung OEM DE96-00414A latch-body and switch assembly. Genuine Samsung OEM3 Switches IncludedCompatibility SupportFast U.S. Shipping

Read more less

XPARTCO WB24X10146 Microwave Door Switch The XPARTCO WB24X10146 is an aftermarket replacement micro switch (also called a door interlock switch) compatible with a wide range of GE, Hotpoint, RCA, Kenmore, and Sears over-the-range and countertop microwaves. This is a "stand on" style normally-open (NO) interlock switch, identified by the internal designation KW3A-NO, that mounts near the door latch and only closes its circuit when the door is fully shut and latched. The control board reads this switch as part of a multi-switch safety interlock chain that confirms the door is secure before allowing the magnetron to energize. When this switch fails, the microwave commonly won't start at all, trips a door-related error code, or in rare cases can allow the unit to run with the door not fully secured — which is a safety-relevant fault, not just a convenience one. It directly replaces WB24X10146, WB24X28941, MW-7100-33, AGE22794, AH1019163, AP3866977, 1166990, EA1019163, EAP1019163, PD00039881, PS1019163. Installs in 15–20 minutes with basic hand tools. Quick Answer The XPARTCO WB24X10146 Microwave Door Switch fixes GE, Hotpoint, RCA, and Kenmore/Sears microwaves that won't start, display a door-related error code, or have a door that doesn't reliably confirm as closed. Normally-open (NO) "stand on" interlock switch, rated 250VAC / 16A, with 0.187" (4.7mm) quick-connect terminals. Replaces WB24X10146, WB24X28941, MW-7100-33, AGE22794, AH1019163, AP3866977, 1166990, EA1019163, EAP1019163, PD00039881, PS1019163. Classic symptom: turntable light and display work, but pressing Start does nothing. Common Problems This Part Fixes Microwave won't start when Start is pressed, even though the display and light work Door-related error code or fault light on the display Microwave randomly shuts off mid-cycle Door feels like it isn't latching or registering as closed Clicking sound from the door area with no response from the microwave Intermittent operation that seems tied to how hard the door is closed ⚠ Safety-Relevant Component Door interlock switches are safety components that prevent the magnetron from energizing unless the door is fully closed and latched. Never bypass, jumper, or defeat a microwave door switch to "get it working" — doing so can allow microwave energy to leak while the door is open, which is a genuine radiation safety hazard. Always disconnect power before servicing, and replace all interlock switches in the chain if more than one shows signs of wear. Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This microwave door switch directly replaces the following OEM and cross-reference part numbers: WB24X10146, WB24X28941, MW-7100-33, AGE22794, AH1019163, AP3866977, 1166990, EA1019163, EAP1019163, PD00039881, PS1019163 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This door switch is compatible with a wide range of GE-built microwaves across the following brands: GE over-the-range and countertop microwaves (JVM, PVM, and CEB series, including JEM3072DH1BB, JEM3072SH1SS, JNM3161DF2BB, and CCWK15C1W1DS/SS) Hotpoint microwaves (GE-built models) RCA microwaves (GE-built models) Kenmore and Sears microwaves (select GE-built models) Note: Do not confuse this with the similarly styled EXP499/EXP497 microwave door switches, which also use 4.7mm terminals but are not the same switch. WB24X10146 is a "stand on" style switch specific to GE's own interlock design — always match by part number, not terminal size alone. Always verify your appliance model number before ordering. Key Features Normally-open (NO) "stand on" door interlock switch, internal designation KW3A-NO Resolves "won't start," "door error code," and "shuts off mid-cycle" symptoms caused by interlock switch failure Rated 250VAC / 16A for reliable switching under microwave load 0.187" (4.7mm) quick-connect terminals for a secure wire connection Direct-fit mounting to match the original interlock bracket Replaces WB24X10146, WB24X28941, MW-7100-33, AGE22794, AH1019163, AP3866977, 1166990, EA1019163, EAP1019163, PD00039881, PS1019163 Compatible with GE, Hotpoint, RCA, Kenmore, and Sears microwaves across dozens of models Aftermarket replacement built to OEM-equivalent quality and safety standards Product Specifications Part Number XPWB24X10146 OEM Part Number WB24X10146 Part Type Microwave Door Interlock Switch ("Stand On" / KW3A-NO) Condition Aftermarket Replacement Switch Type Normally Open (NO) Voltage Rating 250VAC Current Rating 16A Terminal Width 0.187" (4.7mm) Compatible Brands GE, Hotpoint, RCA, Kenmore, Sears Installation Notes ⚠️ Unplug Microwave Before Starting Disconnect power at the outlet, and for built-in/over-the-range units also switch off the dedicated circuit breaker — microwaves store high voltage in the capacitor even after unplugging. Remove the outer cabinet or control panel cover to access the door switch assembly near the latch mechanism. Photograph the wiring before disconnecting, since GE microwaves typically use two or three interlock switches wired in sequence and mixing up the connections can leave the unit unsafe to operate. Disconnect the quick-connect terminals from the old switch, noting which wire goes to which terminal. Remove the mounting screw(s) holding the switch to its bracket and remove the old switch. Install the new WB24X10146 in the same position and secure it with the mounting screw(s). Reconnect the terminals exactly as photographed. Reassemble the cabinet or panel, restore power, and test that the door registers correctly and the microwave starts normally. Tools needed: Phillips screwdriver, nut driver (for cabinet screws). Frequently Asked Questions My microwave's display and turntable light work, but it won't start — is this the part? This is a classic symptom of a failed door interlock switch. The control board needs a confirmed "door closed and latched" signal from all switches in the interlock chain before it will energize the magnetron. If that signal is missing from even one switch, most GE microwaves will power up normally but refuse to start a cook cycle. Confirm with a multimeter continuity test on the suspect switch before ordering, since GE microwaves usually use more than one interlock switch. Is this the same as the EXP499 or EXP497 microwave door switch? No — while all three use similar 4.7mm terminals, they are different switches used in different microwave platforms and are not interchangeable. WB24X10146 is GE's own "stand on" KW3A-NO design. Always match by part number rather than terminal size or general appearance. Is it safe to keep using the microwave if I suspect this switch is bad? We'd recommend not continuing to use it until it's repaired. Door interlock switches exist specifically to prevent microwave energy from leaking out while the door is open or not fully latched. If a switch is failing intermittently, the microwave may seem to work sometimes, but that's not a reason to keep using it — replace the switch before further use, and never attempt to bypass or jumper an interlock switch. How many interlock switches does my GE microwave have, and do I need to replace them all? Most GE microwaves use two or three interlock switches wired in sequence (often a primary switch, a secondary/monitor switch, and sometimes a door sensing switch). You typically only need to replace the specific switch that's testing bad, but if one has failed from age or wear, the others are often not far behind — some technicians replace the full set at once to avoid a repeat repair call. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO XPC75-450R Round Run / Start Capacitor (CBB65, 7.5 MFD, 450V) The XPARTCO XPC75-450R is a universal single run capacitor for single-phase AC motors. Unlike a dual run capacitor, which combines two capacitors into one can to serve both a compressor and a fan motor, this is a single capacitor with two terminals, sized for one motor circuit. Once a motor has started, this capacitor stays in the circuit continuously, correcting the phase of the current feeding the motor's auxiliary winding, which improves torque, efficiency, and running smoothness. This 7.5 MFD size is a very common rating for condenser fan motors, but the same CBB65-style capacitor is also widely used on pool pumps, small air compressors, washing machines, and other single-phase motor equipment. Rated 7.5 MFD at 450VAC. Like all run capacitors, this one stores an electrical charge even after power is disconnected, and it should always be treated as energized until properly discharged. Over time, the dielectric material inside breaks down from heat and electrical stress, causing the capacitor to lose capacitance or fail outright. A failing run capacitor produces a recognizable symptom set: the motor hums but won't start, runs weakly, overheats, trips a breaker or overload protector, or the capacitor can itself becomes visibly bulged, domed, or leaks oily residue at the top. Quick Answer The XPARTCO XPC75-450R Round Motor Run Capacitor fixes single-phase motor equipment — condenser fan motors, pool pumps, small compressors, and similar applications — where the motor hums but won't start, runs weakly, overheats, or trips its breaker or overload protector. 7.5 MFD, 450VAC, round CBB65-style capacitor, 2 terminals. Capacitors store a dangerous electrical charge even after power is disconnected — always discharge before handling. Common Problems This Part Fixes Motor hums but won't start Motor runs, but weakly or with reduced torque Motor runs hot or trips its internal overload protector Fan or pump won't start on its own but will run if given a manual push Equipment trips the circuit breaker shortly after starting Capacitor can visibly bulging, domed on top, or leaking oily residue Motor that used to start slowly and has now stopped starting altogether Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers XPC75-450R This is a universal component rather than a single-manufacturer part, so the specific OEM number your equipment's label references will vary by brand. This capacitor is a correct replacement for any single run capacitor matching the 7.5 MFD rating with a voltage rating of 450V or lower. If you have your original part number, contact our support team and we will verify compatibility before you order. Compatibility This single run capacitor is a universal replacement compatible with single-phase AC motor equipment across all major brands, wherever the original capacitor is rated: 7.5 MFD 370V, 440V, or 450V (this capacitor's 450V rating exceeds and safely replaces either lower rating) Round can shape with 2 terminals Common applications include central air conditioner and heat pump condenser fan motors, pool and spa pumps, small single-phase air compressors, and various single-phase motor equipment. Note — single run, not dual: This is a single-motor capacitor with 2 terminals, distinct from our dual run capacitors (such as the XPDC80X5-450R and similar listings), which combine two capacitors and 3 terminals to serve both a compressor and a fan motor from one can. If your equipment's original capacitor has 3 terminals labeled C, Herm, and Fan, you need a dual capacitor instead of this single one. The MFD rating must match your original capacitor exactly; voltage rating can be equal to or higher than the original, but never lower. Always verify your original capacitor's specifications, printed on its can, before ordering. Contact our support team if you'd like help confirming compatibility. Key Features Universal single run capacitor for single-phase AC motors 7.5 MFD rating in a compact round can — a common size for condenser fan motors and similar equipment 450VAC rating — a safe upgrade replacement for equipment originally speced at 370V or 440V Round CBB65-style can construction Resolves "hums but won't start," "runs weakly," "overheats," and "trips the breaker" symptoms caused by capacitor failure 2 quick-connect terminals for a direct plug-on fit to standard motor wiring 50/60Hz rated Built to meet or exceed industry-standard specifications for this capacitor class Product Specifications Part Number XPC75-450R Part Type Single Run Capacitor Condition New — Universal Replacement Part Capacitance 7.5 MFD (µF) Voltage Rating 450VAC Shape Round Terminals 2 (quick-connect) Frequency 50/60 Hz Tolerance ±5% Construction Type Polypropylene film capacitor Operating Temperature Range -40°C to 70°C (-40°F to +158°F) Safety Approvals CQC, VDE, TÜV, CL Approval Standard GB/T 3667, EN 60252 Application Single-Phase AC Motors — Condenser Fans, Pool Pumps, Small Compressors Quantity 1 single run capacitor Compatible Brands Universal — all major brands Installation Notes ⚠️ Danger — Capacitors Store A Dangerous Electrical Charge Shut off power to the equipment at the disconnect box and at the breaker before beginning. A capacitor stores an electrical charge even after power has been disconnected, and that charge can deliver a serious or fatal shock. Before touching either terminal, discharge the capacitor by shorting the two terminals together using an insulated-handle screwdriver, or by using a proper capacitor discharge tool with a resistor. Never short the terminals with a bare metal tool held with your bare hand. If you are not fully comfortable performing a capacitor discharge safely, have a qualified technician replace this part instead. ⚠️ Photograph The Wiring Before Disconnecting Wear work gloves and safety glasses. After confirming the capacitor is fully discharged, photograph the wiring on the old capacitor's terminals before disconnecting anything. Note which wire came from which terminal, or label them individually with tape. Remove the mounting strap or bracket holding the old capacitor in its housing, and disconnect each wire from its terminal. Install the new XPC75-450R in the same mounting position, secure it with the strap or bracket, and reconnect each wire to its matching terminal exactly as labeled. Double-check both connections before restoring power. Restore power at the breaker and disconnect box, and confirm the motor starts promptly and runs smoothly. Tools needed: insulated-handle screwdriver or capacitor discharge tool, nut driver, work gloves, safety glasses. Frequently Asked Questions How do I know if I need this single capacitor or a dual run capacitor? Look at your old capacitor's terminals. If it has only 2 terminals serving one motor circuit, this single capacitor is the correct type. If it has 3 terminals labeled C, Herm, and Fan (or similar), it's a dual capacitor serving both a compressor and a fan motor from one can, and you'll need a dual capacitor such as our XPDC-series listings instead. The two types are not interchangeable. Can I use a 450V capacitor to replace my old 370V or 440V one? Yes. Voltage rating is a ceiling, not an exact match requirement — a capacitor rated for a higher voltage than your original will work safely and often lasts longer under the same electrical stress. What you cannot do is go the other direction: never install a capacitor with a lower voltage rating than your original, since that risks premature failure or the capacitor breaking down under normal operating conditions. My fan or pump motor hums but won't start. Is this the capacitor? It's one of the most common causes of exactly that symptom. A run capacitor gives the motor the extra push needed to start turning; without it working correctly, the motor can draw power and hum in place without ever actually starting to spin. If you can see the capacitor can and it looks bulged, domed on top, or is leaking a brown oily residue, that's strong visual confirmation of failure. Is this a genuine OEM part? This is a universal replacement part rather than a brand-specific OEM part. Because run capacitors are a standardized component defined by their electrical specifications rather than their manufacturer, this capacitor is a correct replacement for any equipment's original capacitor that shares the same 7.5 MFD, 450VAC, round rating — regardless of which brand originally installed it. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Replacement Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO XPDC60X5-450R Dual Run Capacitor (60/5 MFD, 450V, Round) The XPARTCO XPDC60X5-450R is a universal dual run capacitor for central air conditioners, heat pumps, and condensing units. A run capacitor works alongside a single-phase AC motor to keep it running efficiently once it's started, boosting torque and correcting the phase of the current feeding the motor's windings. This is a dual capacitor, meaning it combines two separate capacitors — one for the compressor, one for the condenser fan motor — into a single three-terminal can, which is why nearly every residential outdoor AC unit uses exactly this style of component to run both motors from one part. Rated 60 MFD for the compressor circuit and 5 MFD for the fan motor circuit, at 450VAC, in a round aluminum can housing. Because a capacitor's voltage rating is a ceiling rather than a fixed match, this 450V-rated capacitor can safely replace an original capacitor rated 370V or 440V — going higher on voltage is always safe, going lower is not. Over time, the dielectric material inside a run capacitor breaks down from heat cycling and electrical stress, causing it to lose capacitance or fail outright. A failing dual capacitor produces a very recognizable set of symptoms: the outdoor unit hums but the compressor or fan won't start, the fan spins slowly or needs a manual push to get going, the system trips the breaker, or the capacitor can itself is visibly bulging, domed, or leaking oily residue at the top. Quick Answer The XPARTCO XPDC60X5-450R Dual Run Capacitor fixes central air conditioners and heat pumps where the outdoor unit hums but won't start, the compressor or fan motor won't run, the fan spins slowly or needs a manual push, the breaker trips, or the capacitor can is visibly bulged or leaking. 60 MFD (compressor) + 5 MFD (fan) dual capacitor, 450VAC, round, 3-terminal. Universal fit for equipment originally speced at 370V or 440V, since a higher voltage rating is always a safe upgrade. Capacitors store a dangerous electrical charge even after power is disconnected — always discharge before handling. Common Problems This Part Fixes Outdoor AC unit hums but the compressor won't start Condenser fan won't spin, or spins slowly and needs a manual push to get going System trips the breaker shortly after starting AC blows warm air because the compressor isn't running Repeated clicking sound from the contactor as it tries and fails to start the motor Capacitor can visibly bulging, domed on top, or leaking oily residue System that used to start slowly and has now stopped starting altogether Burning smell from the outdoor unit's electrical compartment Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers XPDC60X5-450R This is a universal component rather than a single-manufacturer part, so the specific OEM number your HVAC system's label references will vary by brand (Goodman, Trane, Carrier, Rheem, York, Lennox, Amana, and others). This capacitor is a correct replacement for any dual run capacitor matching the 60 MFD / 5 MFD rating with a voltage rating of 450V or lower. If you have your original part number, contact our support team and we will verify compatibility before you order. Compatibility This dual run capacitor is a universal replacement compatible with central air conditioners, heat pumps, and condensing units across all major HVAC brands, wherever the original capacitor is rated: 60 MFD (compressor) + 5 MFD (fan motor) 370V, 440V, or 450V (this capacitor's 450V rating exceeds and safely replaces either lower rating) Round can shape with 3 terminals Note: The MFD (microfarad) rating must match your original capacitor exactly on both sides — do not substitute a different MFD value for either the compressor or fan side. Voltage rating, on the other hand, can be equal to or higher than the original (450V safely replaces 370V or 440V), but never lower. Can shape (round vs. oval) affects only physical fit inside your unit's electrical compartment, not performance. If you're unsure of your original capacitor's specifications, they're printed directly on its can — contact our support team if you'd like help confirming compatibility. Key Features Universal dual run capacitor — supports both the compressor and condenser fan motor from one component 60 MFD compressor rating + 5 MFD fan motor rating in a single 3-terminal can 450VAC rating — a safe upgrade replacement for equipment originally speced at 370V or 440V Round aluminum can construction Resolves "hums but won't start," "fan spins slowly," "trips the breaker," and "bulging or leaking can" symptoms caused by capacitor failure 1/4" quick-connect terminals for a direct plug-on fit to standard HVAC wiring 50/60Hz rated Safety approved: CQC, VDE, TÜV, and CL; built to GB/T 3667 and EN 60252 standards Built to meet or exceed industry-standard specifications for this capacitor class Product Specifications Part Number XPDC60X5-450R Part Type Dual Run Capacitor Condition New — Universal Replacement Part Capacitance — Compressor 60 MFD (µF) Capacitance — Fan Motor 5 MFD (µF) Voltage Rating 450VAC Shape Round Terminals 3 (1/4" quick-connect) Frequency 50/60 Hz Tolerance ±5% Construction Type Polypropylene film capacitor Operating Temperature Range -40°C to 70°C (-40°F to +158°F) Safety Approvals CQC, VDE, TÜV, CL Approval Standard GB/T 3667, EN 60252 Application Central Air Conditioners, Heat Pumps, Condensing Units Quantity 1 dual run capacitor Compatible Brands Universal — all major HVAC brands Installation Notes ⚠️ Danger — Capacitors Store A Dangerous Electrical Charge Shut off power to the outdoor unit at the disconnect box and at the breaker before beginning. A capacitor stores an electrical charge even after power has been disconnected, and that charge can deliver a serious or fatal shock. Before touching any terminal, discharge the capacitor by shorting each pair of terminals together (C-to-Fan, C-to-Herm, and Fan-to-Herm) using an insulated-handle screwdriver, or by using a proper capacitor discharge tool with a resistor. Never short the terminals with a bare metal tool held with your bare hand. If you are not fully comfortable performing a capacitor discharge safely, have a qualified HVAC technician replace this part instead. ⚠️ Photograph The Wiring Before Disconnecting — Match Terminals Exactly Wear work gloves and safety glasses. After confirming the capacitor is fully discharged, photograph the wiring on the old capacitor's terminals before disconnecting anything — dual capacitors are labeled C (Common), Herm or Comp (compressor/hermetic), and Fan, and getting a wire on the wrong terminal can damage the new capacitor or the motor it feeds. Note which terminal each wire came from, or label them individually with tape. Remove the mounting strap or bracket holding the old capacitor in its housing, and disconnect each wire from its terminal. Install the new XPDC60X5-450R in the same mounting position, secure it with the strap or bracket, and reconnect each wire to the matching terminal (C, Herm, and Fan) exactly as labeled. Double-check every connection before restoring power. Restore power at the breaker and disconnect box, and confirm the compressor and fan both start promptly and run smoothly. Tools needed: insulated-handle screwdriver or capacitor discharge tool, nut driver, work gloves, safety glasses. Frequently Asked Questions My AC unit hums but won't start. Is this the capacitor? It's one of the most common causes of exactly that symptom. A run capacitor gives the compressor or fan motor the extra push needed to start turning; without it, the motor can draw power and hum in place without ever actually starting to spin. If you can see the capacitor can and it looks bulged, domed on top, or is leaking a brown oily residue, that's strong visual confirmation of failure. Can I use a 450V capacitor to replace my old 370V or 440V one? Yes. Voltage rating is a ceiling, not an exact match requirement — a capacitor rated for a higher voltage than your original will work safely and often lasts longer under the same electrical stress. What you cannot do is go the other direction: never install a capacitor with a lower voltage rating than your original, since that risks premature failure or the capacitor breaking down under normal operating conditions. Does the round vs. oval shape matter? Only for physical fit inside your unit's electrical compartment — it has no effect on electrical performance. If your unit's mounting bracket or available space is sized for a round can, use a round capacitor; if it's sized for an oval can, use an oval one. The MFD and voltage ratings are what matter electrically, not the shape. The fan spins if I give it a push, but won't start on its own. What does that mean? This is a classic sign of a weak or failing capacitor — it may still have enough charge to keep the motor running once it's already spinning, but not enough to provide the initial starting torque. This is a strong signal to replace the capacitor before it fails completely and leaves you with no cooling at all. Is this a genuine OEM part? This is a universal replacement part rather than a brand-specific OEM part. Because dual run capacitors are a standardized component defined by their electrical specifications rather than their manufacturer, this capacitor is a correct replacement for any unit's original capacitor that shares the same 60/5 MFD, 450VAC, round dual run capacitor rating — regardless of which HVAC brand originally installed it. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Replacement Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPMTC-100 Microwave Thermal Cut-Off Fuse 100℃ (212°F) – Normally Closed – Universal Microwave Safety Cutoff Product Description Protect your microwave from overheating with the XPMTC-100 Microwave Thermal Cut-Off Fuse 100℃ (212°F), Normally Closed. This high-quality aftermarket safety device is designed to remain closed (conductive) during normal operation and open permanently when temperatures exceed 100℃, cutting power to prevent damage or fire risk. A failed or tripped thermal cut-off can cause the microwave to lose power or stop heating. Replacing it with this correctly rated normally closed fuse restores safe operation and proper protection. Replaces Part Numbers XPMTC-100, MTC-100, Microwave Thermal Fuse 100C NC, 212F Normally Closed Thermal Cutoff, KSD-100LC, WB27X11094, 1556167, AH2370184, EA2370184, PD00044040, EAP2370184, AP4484359, PS2370184, WB27X10909, 1262954, AH1481222, EA1481222, PD00075864, EAP1481222, AP3994059, PS1481222, DE47-20196C, 2079793, DE47-20196A, PD00023369, AP4580114, PS4226487, 5304456094, 1198238, AH1532498, PD00083148, EA1532498, AP3960659, PS1532498. Compatibility This normally closed microwave thermal cut-off fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 100℃ (212°F) NC thermal cutoff. Commonly used in countertop, over-the-range, and built-in microwave models. Always verify temperature rating and NC (Normally Closed) configuration before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Built to OEM-equivalent safety specifications 🌡️ 100℃ (212°F) Rating – Trips at unsafe temperature levels 🔁 Normally Closed (NC) – Conducts power during normal operation 🛡️ Critical Safety Component – Prevents overheating and fire hazards 💰 Cost-Effective Repair – Affordable alternative to OEM thermal cut-offs 📐 Product Specification Part Number: XPMTC-100 Component Type: Microwave Thermal Cut-Off Fuse Temperature Rating: 100℃ (212°F) Contact Type: Normally Closed (NC) Function: One-time safety cutoff Material: Heat-resistant metal body Application: Magnetron or microwave cavity temperature protection Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, insulated pliers ⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow capacitors to discharge before handling internal parts. Basic Steps: Disconnect microwave power. Remove the outer cabinet or access panel. Locate the thermal cut-off near the magnetron or cavity. Disconnect wiring and remove the failed fuse. Install the new XPMTC-100 (NC) thermal cut-off in the same position. Reassemble the microwave and restore power. Test operation. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Aftermarket Appliance Parts 🔄 30-Day Return Policy Restore microwave safety and dependable operation — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

XPARTCO 8572717 Washer Motor Start Capacitor The XPARTCO 8572717 is an aftermarket replacement motor start capacitor for Whirlpool-built top-load washers and washer/dryer combination units. Unlike a run capacitor that stays in the circuit continuously, this start capacitor's job is brief and intense: at the instant the motor is commanded to start, it delivers a strong momentary boost of voltage to help the motor overcome its own inertia and get up to speed quickly. Once the motor reaches running speed, a relay switches it out of the circuit, handing off to the run capacitor for continuous operation. That short, high-stress duty cycle is exactly why start capacitors are a common failure point — they work hard for a fraction of a second on every single cycle start. Rated 189–227 MFD at 125VAC, 60Hz. The capacitor is a black cylindrical component mounted to the rear panel of the washer, held in place by a small plastic retaining clip and wrapped in a foam shield that protects it from moisture. Common failure modes include the internal dielectric breaking down from repeated startup stress, and in some cases the capacitor overheating badly enough to produce visible smoke if it fails while still energized. A failing start capacitor produces a clear symptom: the washer motor hums but won't start, or the motor fails to spin up while other functions of the washer still respond normally. It directly replaces 357021, 3949169, 661606, W10161696, W10244889, AP6013434, AH11746660, EA11746660, EAP11746660, PS11746660, AWP49120, and PD00003006. Quick Answer The XPARTCO 8572717 Washer Motor Start Capacitor fixes Whirlpool-built top-load washers and washer/dryer combos where the motor hums but won't start, the washer won't agitate or spin, or there's a burning smell from the motor area. Includes foam shield. 189–227 MFD, 125VAC, 60Hz. Replaces 357021, 3949169, 661606, W10161696, W10244889, AP6013434, AH11746660, EA11746660, EAP11746660, PS11746660, AWP49120, PD00003006. Capacitors store a dangerous electrical charge even after power is disconnected — always discharge before handling. Common Problems This Part Fixes Washer motor hums but won't start Washer won't agitate Washer won't spin or drain because the motor never starts Burning smell coming from the motor area Washer that starts a cycle but the drum never begins moving Motor that struggles to start under load but may start when the drum is empty Visible discoloration, bulging, or a burnt smell from the capacitor itself Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer motor start capacitor directly replaces the following OEM and cross-reference part numbers: 8572717, WP8572717, 357021, 3949169, 661606, W10161696, W10244889, AP6013434, AH11746660, EA11746660, EAP11746660, PS11746660, AWP49120, PD00003006 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This motor start capacitor is compatible with select Whirlpool-built top-load washers and washer/dryer combination units across the Whirlpool family of brands, including: Whirlpool top-load washers and washer/dryer combos — WET, WGT series Kenmore top-load washers (select Whirlpool-built 110-series models) Maytag, KitchenAid, Jenn-Air, and Amana washers (select models) Roper, Admiral, Hardwick, and Estate washers (select models) Magic Chef, Crosley, Inglis, Norge, Modern Maid, and Caloric washers (select models) Select Ikea washers built on the Whirlpool platform Verified model numbers include: WET4027EW, WET4024EW, LTE5243DQ, WET3300XQ, WGT3300XQ, MTW5670TQ0, SAWS800JQ1, LSN7233BW1, LSR7233DZ1, LSQ8243HQ0, LSQ8512KQ0, LSQ8543JQ0, LSQ8543JQ1, LSQ8543JT0, LSQ8543JT1, LSQ9244EQ0, LSQ9544KQ0, LSQ9549LG0, LSQ9549LG1, LSQ9549LG2, LSQ9549LG3, LSQ9549PW2, 8LSC6244BQ0, and Kenmore 110.72407600, 110.72408440, 110.74414130, 110.81360430, 110.82074620, 110.82984100, 110.91565810, and 110.98573110. Note: This capacitor fits both standalone washers and Whirlpool washer/dryer combination units. Always verify your full model number before ordering, since specifications and mounting can vary by platform. Contact our support team with your model number if you're unsure. Key Features Aftermarket replacement start capacitor — delivers a momentary voltage boost to get the washer motor spinning at startup Resolves "motor hums but won't start," "won't agitate," "won't spin," and "burning smell" symptoms caused by capacitor failure Rated 189–227 MFD, 125VAC, 60Hz Includes foam shield to protect against moisture — transfer or reuse per your model's original configuration Direct drop-in replacement — mounts to the same rear panel retaining clip Replaces 357021, 3949169, 661606, W10161696, W10244889, AP6013434, AH11746660, EA11746660, EAP11746660, PS11746660, AWP49120, and PD00003006 Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Roper, and related top-load washers and washer/dryer combos Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number 8572717 OEM Part Number WP8572717 Part Type Washer Motor Start Capacitor Condition Aftermarket Replacement Application Top-Load Washers / Washer-Dryer Combos (Whirlpool-Built) Capacitance 189–227 MFD (µF) Voltage 125VAC Frequency 60 Hz Shape Cylindrical (black) Included Components Foam moisture shield Mounting Rear panel, plastic retaining clip Quantity 1 start capacitor Compatible Brands Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Roper, Admiral, Hardwick, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Caloric, Ikea Installation Notes ⚠️ Danger — Capacitors Store A Dangerous Electrical Charge Unplug the washer or shut off the house circuit breaker before beginning. A capacitor stores an electrical charge even after power has been disconnected, and that charge can deliver a serious or fatal shock. Before touching either terminal, discharge the capacitor by shorting its two terminals together using an insulated-handle screwdriver, or by using a proper capacitor discharge tool with a resistor. Never short the terminals with a bare metal tool held with your bare hand. If you are not fully comfortable performing a capacitor discharge safely, have a qualified appliance technician replace this part instead. ⚠️ Transfer The Foam Shield To The New Capacitor Wear work gloves. Remove the washer's console and then the spring clips that secure the top/body assembly to the washer frame, using a putty knife to gently release them. With the body lifted or set aside, locate the capacitor — a black cylindrical component mounted to the rear panel, held in place by a small plastic retaining clip. Using a flat-blade screwdriver, gently pop the plastic clip away from the capacitor to release it. After confirming the capacitor is fully discharged, unplug it from the appliance wiring. Remove the foam shield from the old capacitor and transfer it onto the new one before installing — this shield protects the capacitor from moisture, and skipping it leaves the new part more exposed to washer humidity. Connect the new 8572717 capacitor to the wiring, snap it back into the plastic retaining clip in the same position, and reassemble the body, spring clips, and console in reverse order. Restore power and run a test cycle to confirm the motor starts promptly on both agitate and spin. Tools needed: putty knife, flat-blade screwdriver, Phillips screwdriver, insulated-handle screwdriver or capacitor discharge tool, work gloves. Frequently Asked Questions My washer motor hums but won't start. Is this the right part? Yes, this is the classic symptom of a failed start capacitor. Since this capacitor's entire job is delivering the momentary voltage boost needed to get the motor spinning from a standstill, a failure here often leaves the motor energized and humming but unable to actually overcome its own inertia and start turning. What's the difference between a start capacitor and a run capacitor? A start capacitor works only for a brief moment — it delivers a strong voltage boost the instant the motor is told to start, then a relay switches it out of the circuit once the motor reaches running speed. A run capacitor, by contrast, stays in the circuit continuously while the motor operates, correcting current phase for efficiency. Because the start capacitor works so hard in such a short burst on every single start, it's a more common failure point than a run capacitor on this type of motor. Do I need to reuse the foam shield from my old capacitor? Yes, it's worth transferring. The foam shield wraps around the capacitor to protect it from moisture inside the washer cabinet, and reusing it on the new capacitor helps the replacement hold up the same way the original was designed to. If the foam has degraded significantly, you can skip it, but it's a simple step that adds meaningful protection. My old capacitor got hot and smoked. Is that dangerous? Yes — a capacitor that overheats to the point of smoking has failed in a way that can pose a fire or electrical hazard, and the washer should not be used again until it's replaced. This kind of failure typically happens when a capacitor stays energized longer than it should, generating heat it isn't designed to dissipate. Replace the capacitor and, if the washer's start relay or timer seems to be holding the capacitor in the circuit too long, have that checked as well. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the electrical specifications (189–227 MFD, 125VAC, 60Hz), cylindrical form factor, and mounting configuration of the original WP8572717 start capacitor used in compatible Whirlpool, Kenmore, Maytag, KitchenAid, and related top-load washers and washer/dryer combos. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

(5 Pack) XPARTCO XP5KV09A Microwave Line Fuse 0.9A, 5KV The XPARTCO XP5KV09A is a pack of 5 replacement high-voltage fuses for microwave ovens, each rated 0.9 A (900 mA) at 5 kV. Each is a glass-and-metal tube fuse that sits in the microwave's high-voltage circuit and protects it against overcurrent, so a fault such as a shorted diode or capacitor opens the fuse before it damages other components. When this fuse blows, the microwave typically stops heating or shuts down, although the lights, display, and fan can still work. These are universal-style fuses sold by rating, not by brand, so they fit any microwave that calls for a 0.9 A, 5 kV high-voltage fuse. The 5-pack covers the repair and leaves spares for the next one. A blown fuse is usually a symptom of another failed part, so the cause should be found and fixed as part of the repair. Replacement should be done by a qualified service technician. Quick Answer The (5 Pack) XPARTCO XP5KV09A Microwave Fuse is a pack of five 0.9 A, 5 kV high-voltage fuses for microwave ovens whose original fuse has blown, so the microwave won't heat. Match the rating printed on your old fuse before ordering. Classic symptom: the microwave powers on, the light and turntable work, but it does not heat food. Common Problems This Part Fixes Microwave runs but does not heat Microwave appears dead or shuts down when started, with a blown high-voltage fuse High-voltage fuse open or blackened after a component failure Keeping a rated spare on hand for technician repairs Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers These fuses are sold under the following part number and rating: XP5KV09A, F900mAL5KV, EAF36358314, DE91-70071A, DE91-70060B, F900mAL5KV, EAF36358314, ALG54035, PD00074794, AP5957954, PS10067115, WB26X35519, AGE22550, AP6997696. PD00096398, PS16542134, WB02X35377, AGE21237, AP6989400, PD00084692, PS16216933, WB27X35672, AGE22690, PD00078809, EAP16219548, AP6994733, PS16219548, EAF36358316, PD00051271, EAP10066444, ALG54048, AP5957955, PS10066444 This is a rating-based universal fuse, so there is no single manufacturer part number. Match your oven's fuse by the 0.9 A (900 mA), 5 kV rating marked on the old fuse or listed in your service manual. Compatibility These fuses are for microwave ovens that use a: 0.9 A (900 mA), 5 kV high-voltage fuse Note: Microwaves use different fuses, and the rating must match. Some use 0.75 A, 0.8 A, or other high-voltage ratings, and a separate low-voltage line fuse near the power cord (for example, 125 V, 20 A) is a different part. Check the rating on your old fuse or in your service manual. Contact our support team with your model number and we'll help verify before you order. Key Features Replacement high-voltage microwave fuses, 0.9 A (900 mA) at 5 kV Glass-and-metal tube construction Overcurrent protection for the microwave's high-voltage circuit Sold by rating, so they suit any microwave that calls for a 0.9 A, 5 kV fuse 5 fuses per pack, with spares for future repairs Product Specifications Part Number XP5KV09A Part Type Microwave High-Voltage Fuse Condition Aftermarket Replacement Current Rating 0.9 A (900 mA) Voltage Rating 5 kV Quantity 5 Fuses Construction Glass and Metal Tube Application Microwave Ovens Using a 0.9 A, 5 kV Fuse Installation Notes ⚠️ Danger: Lethal Charge — Qualified Technician Installation Only A microwave's high-voltage capacitor can hold a lethal electrical charge even after the microwave is unplugged. Replacing a high-voltage fuse should be done by a qualified service technician who knows how to safely discharge and test the high-voltage circuit. Do not open the microwave cabinet unless you are trained to do so. Unplugging the microwave does not make this circuit safe. A technician will normally unplug the unit, discharge the capacitor, and test the old fuse for continuity. Because a blown fuse is usually the result of another failed part, such as the diode, capacitor, or transformer, the cause should be found and corrected before the new fuse is fitted, or it will likely blow again. Fit the new fuse in the same holder, confirm the rating matches, keep the remaining fuses as spares, and make sure all covers are back in place before powering the microwave. Frequently Asked Questions My microwave runs but won't heat. Is this the part I need? A blown high-voltage fuse is one possible cause, along with a failed diode, capacitor, magnetron, or transformer. A technician can test the fuse for continuity. If it has none, replace it, and find out why it blew. How do I know if I need a 0.9 A fuse? Check the rating printed on your old fuse or listed in your oven's service manual. The rating must match. Other microwaves use different ratings, so contact our support team with your model number if you're unsure. Is this the same as a microwave line fuse near the power cord? No. A low-voltage line fuse, such as a 125 V, 20 A one, is a different part. This is a high-voltage fuse rated 0.9 A at 5 kV. How many fuses come in this order? Each order includes 5 fuses. Can I install this myself? We recommend installation by a qualified technician only. The high-voltage circuit can hold a lethal charge even when the microwave is unplugged. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

LCD60+5X440R HVAC ROUND DUAL RUN CAPACITOR Engineered by an ISO manufacturer with over twenty years' experience in OEM capacitor fabrication, Linebacker® capacitors are manufactured by the OEM factory and are 100% in-line production tested to the same rigorous standards. Features/Benefits 10,000 AFC pressure sensitive short circuit interrupting capability 3-year warranty from the date of purchase Continuous life tested, oil leak tested and dielectric tested for insulation effectiveness Life tested to 85° C operating temperature for 10,000 cycles Manufactured with thick polypropylene foil to handle increased operating temperatures Meets EIA-456A accelerated life test at 70° C for 60,000 hours PCB-free oil to prevent over-heating UL File # E352486 US and Canada UL approved (C22.2NO.190) Specification: Voltage: Up to 440 VAC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Foil Thickness: 6.0 µm +/- 5% Standard Tolerance: +/- 5% MFD Value: 60+5 Style: Round Size: 2.5x3.94 California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

LCD80+5X440R HVAC ROUND DUAL RUN CAPACITOR Engineered by an ISO manufacturer with over twenty years' experience in OEM capacitor fabrication, Linebacker® capacitors are manufactured by the OEM factory and are 100% in-line production tested to the same rigorous standards. Features/Benefits 10,000 AFC pressure sensitive short circuit interrupting capability 3-year warranty from the date of purchase Continuous life tested, oil leak tested and dielectric tested for insulation effectiveness Life tested to 85° C operating temperature for 10,000 cycles Manufactured with thick polypropylene foil to handle increased operating temperatures Meets EIA-456A accelerated life test at 70° C for 60,000 hours PCB-free oil to prevent over-heating UL File # E352486 US and Canada UL approved (C22.2NO.190) Specification: Voltage: Up to 440 VAC Operating Temperature: -40°F to 185°F (-40°C to 85°C) Foil Thickness: 6.0 µm +/- 5% Standard Tolerance: +/- 5% MFD Value: 80+5 Style: Round Size: 2.5x4.72 California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less