WPW10226427 Refrigerator Genuine OEM Power Supply Board
Replaces Part Numbers: WPW10226427, W10226427, 1551792, OEM18052172, AP6017389, PS11750687.
Description: This is a Genuine OEM refrigerator power supply board. It's an internal component that is made to control the refrigerator functions. This part is made with small precision parts to help with timing defrost and cooling cycles. This part can be damaged or malfunction and stop operating correctly. This may prevent the refrigerator from running, cause strange sounds, or cause the refrigerator to run at the wrong temperature.If this part is damaged, it will need to be replaced. Before replacing the power supply board, make sure the refrigerator is unplugged from the wall. The process will require a flathead screwdriver and a nut driver. Use the tools to unthread the screws on the access cover. Depress the retaining tab to remove the inner cover and disconnect the wires. Press the tab to release the power supply board and snap in the new component. Make sure the wires are properly connected and reassemble.This genuine OEM replacement part is sold on an individual basis. It is directly acquired from the manufacturer and is designed to be compatible with specific refrigerator models made by Kenmore, Whirlpool, Maytag, and KitchenAid.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO DA34-00006C Refrigerator Door Switch
Product Overview
The XPARTCO DA34-00006C Refrigerator Door Switch controls the interior light and signals the control system when the refrigerator door is opened or closed. The DA34-00006C Refrigerator Door Switch is an aftermarket replacement that controls the interior light and signals the control board when the refrigerator or freezer door is open or closed. A faulty switch may result in lights not turning on, fan or cooling issues, or error codes. This switch restores proper operation and ensures your refrigerator functions efficiently every time the door is opened or closed.
This is a two button refrigerator door switch, fits Specific Samsung refrigerator models.
Quick Answer
If your refrigerator light stays on or does not turn on, or the unit behaves as if the door is open/closed incorrectly, the DA34-00006C door switch may be faulty. Replacing it restores correct light function and door status detection.
Replaces Part Numbers
Replaces OEM part number: DA34-00006C, DA34-00006D, DA34-00048A, 1567024, DA34-10122D, EAP2522335, ASM708482, PD00002031, AP4136952, PS4138718.
Compatibility
This refrigerator door switch is compatible with select Samsung and compatible refrigerators.
Samsung Refrigerators
French Door & Side-by-Side Models
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Refrigerator light not turning on
Interior light stays on
Cooling issues related to door detection
Control panel errors due to door status
Key Features
Controls interior light operation
Detects door open/close status
High-quality aftermarket replacement
Durable and reliable construction
Product Specifications
Part Number: DA34-00006C
Part Type: Refrigerator Door Switch
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Refrigerator Door Detection & Light Control
Troubleshooting Guide
Light won’t turn on → Faulty door switch
Light stays on → Switch stuck or not engaging
Cooling affected when door closes → Door status not detected
When Should You Replace This Switch?
Replace this switch if the refrigerator light behaves incorrectly or if the unit is not detecting door position properly.
Installation Notes
⚠️ Disconnect power before installation. Remove the old switch from the cabinet housing, disconnect wiring, and install the new switch securely.
Related Parts
Refrigerator Light Bulb
Door Gasket
Control Board
Frequently Asked Questions
Will this switch fit my refrigerator?This switch fits many Samsung and compatible models. Always verify your model number.
What does a door switch do?It turns the interior light on/off and signals the control system when the door opens or closes.
What are signs of a bad door switch?Light not working, light staying on, or improper door detection.
Is this OEM or aftermarket?This is a high-quality aftermarket replacement part.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
XPARTCO DA32-00024W Refrigerator Temperature Sensor
The XPARTCO DA32-00024W is an aftermarket replacement temperature sensor for Samsung refrigerators. This sensor senses the temperature inside the refrigerator and sends that information to the electronic control board, which uses it to regulate cooling and, on many models, manage the defrost cycle. The manufacturer designation for this sensor is "SENSOR TEMP;NW2,5V,R-DEF," indicating its role in the defrost-related temperature monitoring circuit.
Over time, the sensor's electronics can drift out of calibration or fail outright from age or moisture exposure. A failing sensor typically shows up as inconsistent cooling, temperatures that run warmer or colder than the set point, or increased energy consumption as the refrigerator's control struggles to compensate for inaccurate temperature readings. It directly replaces AP5579174, 3955001, and PS4138632.
Quick Answer
The XPARTCO DA32-00024W Refrigerator Temperature Sensor fixes Samsung refrigerators with inconsistent cooling, temperatures running warmer or colder than expected, or increased energy consumption. Replaces AP5579174, 3955001, PS4138632. This sensor is tied to defrost-related temperature monitoring on many models — if you're also seeing frost buildup or defrost cycle issues, this sensor is worth checking alongside the defrost thermostat or heater.
Common Problems This Part Fixes
Inconsistent cooling in the refrigerator or freezer compartment
Temperature running warmer or colder than the set point
Increased energy consumption from the refrigerator overcompensating
Temperature fluctuations affecting food freshness
Defrost cycle irregularities on models where this sensor is part of that circuit
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator temperature sensor directly replaces the following OEM and cross-reference part numbers:
DA32-00024W, 3955001, AP5579174, ASM30135, EAP4138632, PD00030760, PS4138632.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This temperature sensor is compatible with select Samsung refrigerators, including model numbers RS25H5111SR and RF4287HARS.
Note: Samsung uses several different temperature sensors across its refrigerator lineup, including sensors for different compartments and functions. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which sensor your refrigerator needs.
Key Features
Aftermarket replacement temperature sensor — monitors internal refrigerator temperature
Resolves "inconsistent cooling," "temperature off target," and "high energy use" symptoms caused by sensor failure
Reports temperature data to the electronic control board for cooling and defrost regulation
Direct drop-in replacement — no modification required
Replaces AP5579174, 3955001, and PS4138632
Compatible with Samsung refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Straightforward installation
Product Specifications
Part Number
XPDA32-00024W
OEM Part Number
DA32-00024W
Part Type
Refrigerator Temperature Sensor
Condition
Aftermarket Replacement
Brand
XPARTCO
Manufacturer Designation
SENSOR TEMP;NW2,5V,R-DEF
Function
Senses internal temperature and reports to the electronic control
Repair Difficulty
Easy
Quantity
1 temperature sensor
Compatible Brand
Samsung
Installation Notes
⚠️ Unplug Refrigerator Before Starting Unplug the refrigerator and safely store any food that could spoil while the power is off before installing this part. Wear work gloves to protect your hands. Locate the old temperature sensor per your model's service diagram, since its position varies by refrigerator model. Photograph the wiring connection before disconnecting anything. Disconnect the wiring harness from the old sensor, remove any mounting clips or fasteners holding it in place, and pull it free. Install the new DA32-00024W in the same position, reconnect the wiring harness fully, and secure any mounting hardware. Restore power and monitor the refrigerator's temperature over the next 24 hours to confirm consistent, accurate cooling has returned. Tools needed: Phillips screwdriver (model-dependent), work gloves.
Frequently Asked Questions
My refrigerator's temperature seems inconsistent. Is this the part I need?
Yes, this is a common symptom of a failing temperature sensor. Since this sensor is what reports internal temperature to the control board, a drifting or failed sensor can cause the refrigerator to run warmer or colder than intended, or to cycle inconsistently as the control tries to work from inaccurate data.
What does the "R-DEF" in this sensor's designation mean?
This suggests the sensor plays a role in the refrigerator's defrost-related temperature monitoring on applicable models. If you're seeing frost buildup or defrost cycle problems in addition to general cooling inconsistency, this sensor is worth checking alongside other defrost system components, such as the defrost thermostat or heater.
Is this a difficult repair?
No, replacing this sensor is generally a straightforward repair once you've located its mounting position, which can vary by model. It typically involves disconnecting a wiring harness and removing a small mounting clip or fastener.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the sensing function, voltage reference, and mounting configuration of the original DA32-00024W sensor used in compatible Samsung refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
215846604 Genuine OEM Frigidaire Refrigerator Defrost Timer
The 215846604 is a genuine Frigidaire OEM defrost timer, mounted inside the refrigerator near the top of the back wall. This timer is the scheduler for the defrost circuit: on a set cycle, it switches the refrigerator out of normal cooling mode and into a defrost mode, energizing the defrost heater long enough to melt any frost that has accumulated on the evaporator coil, then switches back to cooling once defrost is complete. This cycle repeats automatically for as long as the refrigerator runs, which is why a healthy timer is essential to preventing frost buildup in the first place.
Rated 120V with a 6 hour, 21 minute cycle, measuring approximately 1.5"H x 3.2"L x 2.3"W. When this timer fails, the defrost heater never gets the signal — and the electrical energy — it needs to run, so frost keeps accumulating on the coil unchecked. A failing timer typically shows up as heavy frost or ice buildup on the evaporator coil, a freezer that runs too cold or too warm, or a refrigerator section that isn't cooling properly because ice-caked coils can't transfer heat efficiently anymore. It directly replaces AP2592907, 08003824, 08011620, 1748201, 241809401, 241809402, 442754, 5300541134, 5300800692, 5308003824, AH423802, EA423802, PS423802, and CC304.
Quick Answer
The 215846604 Genuine OEM Frigidaire Refrigerator Defrost Timer fixes Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers with heavy frost or ice buildup on the evaporator coil, a freezer running too warm or too cold, or a refrigerator section not cooling properly. 120V, 6 hour 21 minute defrost cycle. Replaces AP2592907, 08003824, 08011620, 1748201, 241809401, 241809402, 442754, 5300541134, 5300800692, 5308003824, AH423802, EA423802, PS423802, CC304. Before replacing, test the defrost thermostat and defrost heater with a multimeter — if both test good, the timer is the most likely faulty component.
Common Problems This Part Fixes
Heavy frost or ice buildup on the evaporator coil
Freezer compartment running too cold or too warm
Refrigerator section not cooling properly
Refrigerator or freezer overheating
Refrigerator running constantly as ice-caked coils reduce cooling efficiency
Frost visible on interior walls or around the back panel
Defrost heater not activating on its normal schedule
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator defrost timer directly replaces the following OEM and cross-reference part numbers:
215846604, 08003824, 08011620, 1748201, 241809401, 241809402, 29811-3, 442754, 5300541134, 5300800692, 5308003824, 54113-1, 54113-4, 55448-3, 55448-4, 55467-1, 8003824, AH423802, CC304, EA423802, F111812, G000158274, G000158291, G000173814, G000187005, G000187464, G158274, G163818, G169069, G173814, G174821, G178820, G185160, G187464, K1224661, K1224662, K1226501, K1226502, K1227229, K1227920, K1227927, K1228104, K1228105, K1230354, K1230534, K1233374, K1233375, NR00422503, R000422503, R000900129, R422503, W188C189A06, W188C189A07, WR422503, PD00005279, EAP423802, AP2592907, PS423802.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This defrost timer is compatible with select Frigidaire refrigerators and freezers, and also fits select Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers built on the same Frigidaire/Electrolux platform.
Note — not the same as 215846602: This timer runs a 6 hour, 21 minute defrost cycle. A similarly-numbered part, 215846602, runs a different cycle (6 hour, 40 minute) and replaces a separate set of numbers (215846606, 240371001, 241621501, AP2111929, PS423801). The two are not interchangeable. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which timer fits your refrigerator.
Key Features
Genuine Frigidaire OEM part — factory-specified cycle timing and switch contacts
Automatically schedules the refrigerator's transition between cooling and defrost modes
6 hour, 21 minute defrost cycle
Resolves "frost buildup on the coil," "freezer too cold or too warm," and "refrigerator not cooling" symptoms caused by timer failure
Compact size: approximately 1.5"H x 3.2"L x 2.3"W
Direct drop-in replacement — mounts to the original bracket with the same wiring harness connector
Replaces AP2592907, 08003824, 08011620, 1748201, 241809401, 241809402, 442754, 5300541134, 5300800692, 5308003824, AH423802, EA423802, PS423802, and CC304
Compatible with Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
215846604
Part Type
Refrigerator Defrost Timer
Condition
Genuine OEM
Brand
Frigidaire
Voltage
120V
Defrost Cycle
6 hours, 21 minutes
Location
Inside the refrigerator, near the top of the back wall
Height
1.5 in.
Length
3.2 in.
Width
2.3 in.
Weight
Approx. 2.75 oz.
Repair Difficulty
Easy — basic tools required
Quantity
1 defrost timer
Compatible Brands
Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, Westinghouse
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Locate the defrost timer control inside the refrigerator, typically near the top of the back wall — on some models it may be located behind a rear access panel or near the control housing instead, so check your specific model if it isn't immediately visible. Photograph the wiring harness connector before disconnecting anything. Use a screwdriver to remove the screws securing the timer in place, then carefully disconnect the wiring harness from the back of the old timer. Connect the wiring harness to the new 215846604 timer, matching the original connector orientation, and secure it in place with the mounting screws. Restore power and monitor the refrigerator over the next day to confirm the defrost cycle is running on schedule and frost is no longer accumulating excessively on the coil. Tools needed: screwdriver, work gloves.
Frequently Asked Questions
How do I know if the timer is actually the problem and not the defrost heater or thermostat?
The defrost timer, defrost heater, and defrost thermostat all work together in the same circuit, so it's worth testing the other two before assuming the timer has failed. Test the defrost thermostat and the defrost heater with a multimeter — if both test as functioning properly, it's very likely the timer is the faulty component causing the defrost cycle not to run.
There's heavy frost or ice on the coil. Is that definitely the timer?
It's one of the most common causes. If the timer fails to advance into the defrost portion of its cycle, the heater never gets the signal or the power it needs to run, so frost keeps accumulating on the evaporator coil with nothing to melt it off. This is exactly the scenario this timer is designed to prevent when it's working correctly.
What's the difference between 215846604 and 215846602?
These are different timers with different cycle lengths — this 215846604 runs a 6 hour, 21 minute cycle, while 215846602 runs a 6 hour, 40 minute cycle and replaces a separate group of part numbers. They are not interchangeable, so always confirm which specific number your refrigerator's parts diagram calls for before ordering.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original cycle timing, switch contacts, and wiring harness configuration of the defrost timer originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DA97-07603B Genuine OEM Samsung Refrigerator Ice Maker
The DA97-07603B is a genuine Samsung OEM ice maker assembly for Samsung and select Maytag refrigerators. This is the freezer ice maker, located inside the freezer compartment — it is not the in-door icemaker used on many other Samsung models. This is a plastic tray-style ice maker with a 9-cube flex tray design, an 8-pin connector, and includes a motor for ice ejection, a water valve to fill the mold, and a thermostat that senses temperature and signals when it's time to release the finished ice.
This complete assembly contains the entire ice maker and its housing. If the mold's coating is flaking, or internal components have stopped functioning, replacing the full assembly resolves both problems at once. Failure symptoms include the ice maker not producing ice, reduced ice production, or loud popping sounds coming from the ice maker during operation. It directly replaces DA61-03213B, DA97-07603B, DA97-05037D, DA97-07603A, 2688774, DA59-00294A, DA61-03213B, DA63-06415A, DA97-05037A, DA97-05037C, DA61-05227, AP5651755, ASM105616, PD00002034, PS5575313.
Quick Answer
The DA97-07603B Genuine OEM Samsung Refrigerator Ice Maker fixes Samsung and select Maytag refrigerators where the freezer ice maker has stopped producing ice, is making less ice than usual, or is making loud popping sounds during operation. 9-cube flex tray, 8-pin connector. Replaces DA61-03213B, DA97-07603B, DA97-05037D, DA97-07603A, 2688774, DA59-00294A, DA61-03213B, DA63-06415A, DA97-05037A, DA97-05037C, DA61-05227, AP5651755, ASM105616, PD00002034, PS5575313. This is the freezer ice maker — it does not fit an in-door icemaker, and it is not a substitute for the DA97-07603C icemaker used on other models.
Common Problems This Part Fixes
Ice maker has stopped producing ice entirely
Ice maker producing less ice than it used to
Loud popping sounds coming from the ice maker during operation
Ice mold coating visibly flaking or deteriorating
Ice maker cycling but not ejecting ice properly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator ice maker directly replaces the following OEM and cross-reference part numbers:
DA97-07603B, DA97-05037D, DA97-07603A, 2688774, DA59-00294A, DA61-03213B, DA63-06415A, DA97-05037A, DA97-05037C, DA61-05227, AP5651755, ASM105616, PD00002034, PS5575313
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This freezer ice maker is compatible with select Samsung refrigerators, and also fits select Maytag refrigerators built on the Samsung platform, spanning model series including RF220D, RF220N, RF221N, RF22A4, RF23HC, RF260BE, RF261BE, RF263TE, RF27T5, RF28HD, RF28HF, RF28R6, RF28T5, RF30HD, and RF323T, including specific model numbers such as RF220NCTABC/AAA-0001.
Note — freezer icemaker only, and not a substitute for DA97-07603C: This is a drop-in replacement for the freezer icemaker only. It will not fit an in-door icemaker used on many other Samsung models. It also replaces the earlier DA97-07603A version, but is not a suitable substitute for the DA97-07603C icemaker used on other models, despite the similar numbering. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which icemaker your refrigerator needs.
Key Features
Genuine Samsung OEM part — factory-specified mold design and cycling mechanism
9-cube flex tray design
Includes motor for ice ejection, water valve for mold fill, and thermostat for temperature sensing
Resolves "not making ice," "reduced ice production," and "loud popping sounds" symptoms
8-pin connector for a direct electrical fit
Complete assembly — includes the ice maker and its housing
Direct drop-in replacement for the freezer compartment icemaker
Replaces DA61-03213B, DA97-07603B, DA97-05037D, DA97-07603A, 2688774, DA59-00294A, DA61-03213B, DA63-06415A, DA97-05037A, DA97-05037C, DA61-05227, AP5651755, ASM105616, PD00002034, PS5575313
Compatible with Samsung and select Maytag refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
DA97-07603B
Part Type
Refrigerator Freezer Ice Maker Assembly
Condition
Genuine OEM
Brand
Samsung
Tray Style
Plastic, 9-cube flex tray
Connector
8-pin
Location
Freezer compartment (not an in-door icemaker)
Included Components
Ejection motor, water valve, thermostat, housing
Repair Difficulty
Easy — approx. 15 to 30 minutes
Quantity
1 ice maker assembly
Compatible Brands
Samsung, Maytag
Installation Notes
⚠️ Unplug Refrigerator And Shut Off Water Supply Before Starting Unplug the refrigerator from the power outlet and turn off the water supply before beginning. Wear work gloves. On bottom-freezer drawer-style models, most of the time in this repair goes toward removing the trays from the freezer and pulling the freezer door/drawer out for access — budget extra time for this step. Remove the ice maker cover by lifting it away from the housing. Remove the ice bucket and any cover plates blocking access. Photograph the wiring connection before disconnecting anything. Unscrew the ice maker from its housing, disconnect the water line connection and the 8-pin electrical connector, and carefully lift the old assembly out of its compartment. Install the new DA97-07603B in the same position, reconnect the water line and electrical connector fully, and secure it to the housing with its screws. Reinstall the ice maker cover, cover plates, and ice bucket, then replace the freezer trays and close the freezer door/drawer. Restore the water supply and power, then allow several hours for the first cycle to complete and confirm ice is being produced normally. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My ice maker makes loud popping sounds. Is this the part I need?
Yes, this is a documented symptom of a failing ice maker assembly, alongside reduced or stopped ice production. If you're hearing unusual popping noises during the ice-making cycle, replacing the complete assembly addresses the underlying mechanical or electrical issue rather than trying to isolate and repair a specific internal component.
My refrigerator has an in-door ice maker. Will this part fit?
No. This DA97-07603B is specifically a drop-in replacement for the freezer compartment icemaker and will not fit an in-door icemaker used on many other Samsung refrigerator models. Check where your current ice maker is physically located — inside the freezer versus built into the refrigerator door — before ordering.
Is this the same as the DA97-07603C icemaker I've seen for other models?
No. While this part does replace the earlier DA97-07603A version, it is explicitly not a suitable substitute for the DA97-07603C icemaker used on other Samsung models, despite the similar numbering. Always confirm your full model number rather than assuming based on a close part number match.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Samsung to factory specifications — guaranteed fit, materials, and performance. It matches the original mold design, motor, water valve, and thermostat configuration of the freezer ice maker originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
240597220 Genuine OEM Frigidaire Refrigerator Temperature Sensor
The 240597220 is a Genuine OEM Frigidaire replacement refrigerator temperature sensor compatible with a wide range of Frigidaire, Electrolux, Kenmore (253/106/795 prefix), Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, and Ikea refrigerators and household freezers. This NTC (negative temperature coefficient) thermistor continuously monitors the temperature inside the refrigerator or freezer compartment and sends resistance-based readings to the main control board, which uses this data to cycle the compressor, fans, and defrost heaters to maintain accurate temperatures. As the thermistor heats up or cools down, its electrical resistance changes predictably, allowing the control board to calculate the exact temperature in real time.
When this sensor fails or drifts out of range, the refrigerator may run too cold or too warm, cycle excessively, freeze up the evaporator, fail to maintain set temperatures, or display OP error codes. Rated 10K Ohm NTC, with a 5/16" diameter probe, 12" wire, and overall dimensions of 3-5/8"L x 5/8"W x 5/16"H (sensor probe itself measures ~1-3/16"L x 5/16" diameter). Compatible with 20-28 cubic foot North American household refrigerators in French door, side-by-side, top-freezer, and bottom-freezer configurations (post-2005 production). 240597220 is the current OEM part number, superseding 240597203, 240597201, and 240597202. It also replaces 7240597203, AP4032998, AP7243155, AH1765215, EA1765215, EAP1765215, EAP17647917, 1258948, 4985585, OEM21729470, PD00000590, PD00088922, PS1765215, and PS17647917. Not compatible with mini fridges, car refrigerators, commercial units, wine coolers, or ice makers. Installs in 15–20 minutes with basic hand tools.
Quick Answer
The 240597220 Genuine OEM Frigidaire Refrigerator Temperature Sensor fixes Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, and Ikea refrigerators that run too cold or warm, cycle excessively, freeze up the evaporator, or display OP error codes. NTC thermistor — 10K Ohm at room temperature. 5/16" probe diameter, 12" wire. Overall 3-5/8"L x 5/8"W x 5/16"H. Genuine OEM. Supersedes 240597203, 240597201, 240597202. Also replaces 7240597203, AP4032998, AP7243155, AH1765215, EA1765215, EAP1765215, EAP17647917, 1258948, 4985585, OEM21729470, PD00000590, PD00088922, PS1765215, PS17647917. For 20–28 cu ft household refrigerators built 2005 or later.
Common Problems This Part Fixes
Refrigerator running too cold or too warm — sensor not accurately reporting temperature
Inconsistent temperatures — fluctuating cooling that can't maintain set point
OP error code displayed on the control panel (open sensor circuit)
Excessive frost or ice buildup on evaporator coils from erratic defrost timing
Refrigerator running continuously without cycling off
Freezer over-freezing food or fresh food compartment freezing groceries
Food spoilage from temperature instability
Multimeter test shows 0 ohms (shorted), infinite resistance (open), or drifted resistance instead of the expected ~10K Ohms at room temperature
Replaces Part Numbers
This temperature sensor is the current OEM part number and supersedes the following OEM and cross-reference part numbers:
240597220, 240597203, 240597201, 240597202, 7240597203, 4985585, AFR15666, AP7243155, EAP17647917, OEM21729474, PD00088922, PS17647917.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This temperature sensor is compatible with select household refrigerators and freezers from the following brands (20–28 cu ft, built 2005 or later):
Frigidaire refrigerators — Gallery and Professional series, plus standard Frigidaire models (BFHS2611LM, BGHS2634KE, BGHS2634KP, BGHS2644KF, CRSH237LB, PRFG2383AF, PRFC2383AF, ERFG2393AS2, FRSS2323AS8, FFHB2740PP5A and many related models)
Frigidaire upright freezers — FFFH21F7QW, FGU19F6QWB and related models
Electrolux refrigerators — EI24RD65KS0, EI24RD65HS0, EI24RD65HS1, E24RD75KPS0 and related models
Kenmore / Sears refrigerators — 253-prefix, 106-prefix, and 795-prefix models (select Frigidaire/Electrolux-built units)
Crosley refrigerators (select Frigidaire-built models)
White-Westinghouse refrigerators (select models)
Kelvinator refrigerators (select models)
Gibson refrigerators (select models)
Tappan refrigerators (select models)
Viking refrigerators (select Frigidaire-platform models)
Ikea refrigerators (select Frigidaire-platform models)
Not compatible with: mini fridges, car refrigerators, commercial refrigerators/freezers, wine coolers, or dedicated ice makers. Verify your refrigerator was produced after 2005 and check the original part number on the fridge nameplate matches one of the cross-references listed. Contact our support team with your model number if you're unsure.
Key Features
NTC (negative temperature coefficient) thermistor — resistance changes predictably with temperature, allowing precise temperature monitoring
Rated 10K Ohms at room temperature (approximately 25°C / 77°F)
Sends real-time temperature data to the main control board to regulate compressor cycling, fan operation, and defrost timing
Sensor probe: 5/16" diameter x 1-3/16" length · Overall assembly: 3-5/8"L x 5/8"W x 5/16"H · 12" wire lead
White plastic/metal construction with glossy finish
Resolves OP error codes when caused by an open sensor circuit
Compatible with 20–28 cu ft French door, side-by-side, top-freezer, and bottom-freezer refrigerators built 2005 or later
Current OEM part number — supersedes 240597203, 240597201, 240597202 and replaces AP4032998, AH1765215, PS1765215, PS17647917 and additional cross-references
Compatible with Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, Ikea
Genuine OEM part manufactured by Frigidaire/Electrolux to factory specifications — guaranteed fit and performance
Quick DIY repair — installs in 15–20 minutes with basic hand tools
Product Specifications
Part Number
240597220
Supersedes
240597203, 240597201, 240597202
Part Type
Refrigerator Temperature Sensor (NTC Thermistor)
Condition
Genuine OEM
Application
Household Refrigerators and Freezers (Frigidaire/Electrolux platform, 20–28 cu ft, 2005+)
Sensor Type
NTC (Negative Temperature Coefficient)
Resistance
10K Ohms at room temperature
Probe Dimensions
5/16" Diameter x 1-3/16" Length
Overall Dimensions
3-5/8"L x 5/8"W x 5/16"H
Wire Length
12"
Color
White
Finish
Glossy
Material
Plastic / Metal
Error Codes Resolved
OP (open sensor circuit)
Compatible Brands
Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, Ikea
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. Depending on your refrigerator model, the fresh-food temperature sensor is typically located behind the air tower or damper assembly on the rear interior wall of the refrigerator compartment; the freezer temperature sensor is typically located behind the rear freezer access panel near the evaporator coils. Confirm which sensor location matches your symptom and the parts diagram for your specific model before starting. Remove all shelves, drawers, and any items blocking access to the sensor location. Remove the screws holding the air tower/damper cover (fresh food side) or rear freezer access panel to expose the sensor. Photograph the sensor position, wire routing, and connector before removing. Disconnect the wire connector (gently — the connector can be fragile) and release the sensor from its mounting clip. Fully insert the new 240597220 sensor probe into the card slot (no exposure) and secure with the mounting clip. Reconnect the wire connector — plug wiring terminals tightly to avoid poor contact. Use cable ties to secure any loose wire routing as before. Reinstall the cover or panel, replace the shelves and drawers, and plug the refrigerator back in. Allow several hours for the refrigerator to return to its set temperature before reloading with food. Tools needed: Phillips screwdriver, cable ties, multimeter (for testing), work gloves.
Frequently Asked Questions
What does OP error code mean on my Frigidaire refrigerator?
The OP error code (Open) indicates the control board is detecting an open circuit on a temperature sensor input — meaning the sensor is failing to send a resistance signal, either because the sensor itself has failed open internally, the wire has broken, or the connector isn't seated. Replacing the temperature sensor typically resolves the code when the sensor itself is the cause. If the code persists after replacement, check the wire harness between the sensor and the control board for damage, and confirm the connector is fully seated. If the OP code appears alongside other symptoms like frost buildup and cooling issues that persist after sensor replacement, the defrost temperature sensor (on the Harness-Low Side, a different part number) may also need to be replaced, or the main control board may be at fault.
How do I test if the temperature sensor has failed?
Unplug the refrigerator, disconnect the sensor's wire connector, and set your multimeter to resistance mode. At room temperature (approximately 25°C / 77°F), a working NTC thermistor should read approximately 10K Ohms. If the sensor reads 0 ohms, it has shorted internally. If it reads infinite resistance (open circuit, often shown as "OL" on the multimeter), the sensor has failed open. If it reads significantly off from 10K (for example 8.4K or 5K at room temp), the sensor has drifted and is no longer providing accurate readings — replacement is recommended. Any of these results confirms the sensor needs replacement.
My refrigerator has multiple temperature sensors — which one do I replace?
Frigidaire refrigerators typically use multiple temperature sensors: one in the fresh food compartment (behind the air tower/damper), one in the freezer compartment (near the evaporator coils), and often a separate defrost temperature sensor on the Harness-Low Side. The 240597203 is used as the fresh food or freezer compartment temperature sensor. If your symptom is "fresh food too warm" or "freezer over-freezing," the fresh food sensor is the likely candidate. If your symptom is "freezer icing up despite defrost heater working," the defrost temperature sensor may be the culprit — a different part number. Check your refrigerator's parts diagram to confirm the correct sensor location for your specific symptom.
Does this sensor fit my Kenmore refrigerator?
On many Kenmore refrigerators, yes — Sears sells Kenmore-branded refrigerators that are manufactured by Frigidaire/Electrolux, Whirlpool, LG, and Samsung. The 240597203 sensor fits Kenmore refrigerators with model numbers beginning with the 253, 106, or 795 prefixes that are Frigidaire/Electrolux-built. Kenmore refrigerators built by other manufacturers (Whirlpool, LG, Samsung) use different sensors. Check the first three digits of your Kenmore model number — if it's 253, 106, or 795 and falls within the compatible model list, this is the correct part.
Is this an OEM or aftermarket part?
This is a Genuine OEM part manufactured by Frigidaire/Electrolux to factory specifications. It is the exact same temperature sensor installed in compatible Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, and Ikea refrigerators from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DA32-10104N Refrigerator Temperature Sensor
The XPARTCO DA32-10104N is an aftermarket replacement refrigerator temperature sensor (thermistor) compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators. This sensor is mounted on or near the evaporator coil and continuously monitors the internal temperature of the refrigerator compartment, transmitting real-time readings to the electronic control board.
Based on the data received from the sensor, the control board regulates the compressor, evaporator fan motor, and defrost system to maintain the set temperature. When this sensor fails or drifts out of calibration, the control board receives inaccurate temperature readings — leading to a refrigerator that runs too cold, too warm, or triggers a 5E/SE error code. Features a 9-inch cord for easy installation and a sensitive thermal element with temperature detection accuracy of ±0.1°C.
Quick Answer
The XPARTCO DA32-10104N Refrigerator Temperature Sensor fixes refrigerators that are too warm, too cold, display a 5E/SE error code, or have inconsistent temperatures that spoil food. It monitors internal refrigerator temperature and sends data to the control board to regulate cooling. Compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators.
Common Problems This Part Fixes
Refrigerator running too warm — food spoiling faster than normal
Refrigerator running too cold — food or drinks freezing in the fresh food section
5E or SE error code displayed on the control panel
Inconsistent or fluctuating temperatures inside the refrigerator
Compressor running continuously without reaching set temperature
Excessive frost or ice buildup on evaporator coils
Replaces Part Numbers
This sensor directly replaces the following OEM and cross-reference part numbers:
DA32-10104N, DA32-10104V, 2030330, ASM1216617, PD00026468, EAP4138666, AP4979323, PS4138666.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This temperature sensor is compatible with select refrigerators from the following brands:
Samsung French door refrigerators
Samsung side-by-side refrigerators
Samsung bottom freezer refrigerators
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Monitors internal refrigerator temperature and sends real-time data to the electronic control board
Fixes 5E/SE error codes caused by a faulty or out-of-calibration temperature sensor
Temperature detection accuracy of ±0.1°C for precise cooling control
9-inch cord length for easy installation and connection to the control board
Aftermarket replacement built to OEM-equivalent quality standards
Direct drop-in replacement — no modification required
DIY-friendly repair — installs with basic hand tools in 30–45 minutes
Product Specifications
Part Number
DA32-10104N
Part Type
Refrigerator Temperature Sensor (Thermistor)
Condition
Aftermarket Replacement
Application
Refrigerator Temperature Control System
Cord Length
9 inches
Detection Accuracy
±0.1°C
Resistance at 70°F
~9.3K ohms
Resistance at 90°F
~7.7K ohms
Resistance at 100°F
~6.2K ohms
Resistance at 120°F
~4.3K ohms
Compatible Brands
Samsung
Installation Notes
⚠️ Safety First — Unplug Refrigerator Before Starting Unplug the refrigerator from the power source before beginning any repair. Safely remove and store any food that could deteriorate while the power is off. Wear work gloves to protect your hands. The DA32-10104N sensor is located near the evaporator coil, typically behind the rear panel inside the refrigerator or freezer compartment. Remove the panel, locate the sensor along the yellow wire, disconnect the old sensor from its plug, and connect the new sensor in the same position. Reassemble the panel and restore power. Allow 24 hours for the refrigerator to return to normal operating temperature. Tip: Before replacing, test the old sensor with a multimeter — resistance readings outside the values in the specs table above confirm a faulty sensor. Consult your refrigerator's service manual for model-specific instructions.
Frequently Asked Questions
Will the DA32-10104N fit my Samsung refrigerator?
This sensor is compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators. Use the model search above to verify your model, or contact our support team before ordering.
What does the temperature sensor do?
The temperature sensor (thermistor) continuously monitors the internal temperature of the refrigerator and sends readings to the electronic control board. The control board uses this data to regulate the compressor, fans, and defrost system to maintain the set temperature. When the sensor fails or drifts out of range, the control board receives inaccurate data and cannot maintain proper cooling.
What are signs that my temperature sensor needs replacement?
Common signs include: the refrigerator running too warm or too cold, food spoiling faster than normal, a 5E or SE error code on the display, inconsistent temperatures, or the compressor running continuously without reaching the set temperature.
How do I test the DA32-10104N sensor before replacing it?
Use a multimeter to measure the resistance across the sensor terminals. At 70°F the reading should be approximately 9.3K ohms, at 90°F approximately 7.7K ohms, at 100°F approximately 6.2K ohms, and at 120°F approximately 4.3K ohms. Readings significantly outside these values indicate a faulty sensor that needs replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is designed to deliver reliable, accurate temperature sensing at a more affordable price point.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WR55X10025 Genuine OEM GE Refrigerator Temperature Sensor
The WR55X10025 is a genuine GE OEM temperature sensor, also called a thermistor, for GE, Hotpoint, and Kenmore refrigerators. This sensor measures air temperature inside the refrigerator or freezer compartment and reports it continuously to the main control board, which uses that reading to regulate the cooling cycle. On some models, this same sensor design also serves as the defrost sensor mounted on the evaporator coil, monitoring temperature there to help manage the defrost cycle.
Because the control board relies entirely on this sensor's reading to make cooling decisions, a failing or inaccurate sensor can cause the refrigerator to run too cold, too warm, or run for excessively long periods as it tries to correct a temperature it's misreading. On models where it doubles as a defrost sensor, a failure here can also contribute to frost or ice buildup in the freezer. This is a relatively inexpensive part, and it's commonly the actual cause behind symptoms that get mistakenly blamed on the main control board. It directly replaces AP3185407, 914093, AH304103, EA304103, PS304103, WR50X10027, WR50X10034, WR50X10055, WR50X10067, WR55X10025B, WR55X10026, WR55X10027, WR55X10028, WR55X10030, WR55X10087, WR55X10088, WR55X10089, WR55X10367, WR55X10380, WR55X10661, WR55X10711, WR55X10735, WR55X10736, WR55X10737, WR55X10937, WR55X10938, WR55X10939, WR55X11121, WR55X11141, WR55X11150, WR55X11151, and WR55X11152.
Quick Answer
The WR55X10025 Genuine OEM GE Refrigerator Temperature Sensor fixes GE, Hotpoint, and Kenmore refrigerators that run too cold, too warm, run for excessively long periods, or (on models where this sensor doubles as a defrost sensor) show frost or ice buildup in the freezer. A healthy sensor reads approximately 5,000 ohms at 77°F. Replaces AP3185407, 914093, AH304103, EA304103, PS304103, and a wide range of WR50X/WR55X-prefix numbers listed below. This is an inexpensive part that's frequently the actual cause behind symptoms mistakenly blamed on the main control board — worth testing or replacing before assuming a costlier board repair is needed.
Common Problems This Part Fixes
Refrigerator running too cold
Refrigerator running too warm
Refrigerator running for excessively long periods
Freezer not defrosting properly (on models where this sensor also serves as the defrost sensor)
Freezer too cold or showing frost buildup
Display temperature reading that doesn't match the actual temperature inside the compartment
Inconsistent or fluctuating cooling performance
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator temperature sensor directly replaces the following OEM and cross-reference part numbers:
WR55X10025, 914093, WR50X10027, WR50X10034, WR50X10055, WR50X10067, WR55X10025-50PK, WR55X10025B, WR55X10026, WR55X10027, WR55X10028, WR55X10030, WR55X10087, WR55X10088, WR55X10089, WR55X10367, WR55X10380, WR55X10661, WR55X10711, WR55X10735, WR55X10736, WR55X10737, WR55X10937, WR55X10938, WR55X10939, WR55X11121, WR55X11141, WR55X11151, WR55X11152, AH304103, EA304103, OEM9556230, AP3185407, EAP304103, AGE29661, PD00000992, PS304103
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This temperature sensor is compatible with select GE, Hotpoint, and Kenmore refrigerators, and is used broadly across most GE side-by-side and French door refrigerator configurations.
Note: While this sensor is used across a very broad range of GE refrigerator models, always verify your full model number before ordering, since some models use a different sensor design. Contact our support team with your model number if you're unsure.
Key Features
Genuine GE OEM part — factory-specified resistance curve for accurate temperature reporting
Measures air temperature and reports it continuously to the main control board
Also used as a defrost sensor on the evaporator coil on select models
Resolves "too cold," "too warm," "runs too long," and "display reading doesn't match actual temperature" symptoms
Direct drop-in replacement — matches the original mounting and wiring
Replaces a wide range of WR50X and WR55X-prefix part numbers listed above
Compatible with GE, Hotpoint, and Kenmore refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
DIY-friendly repair, typically completed in under an hour
Product Specifications
Part Number
WR55X10025
Part Type
Refrigerator Temperature Sensor (Thermistor)
Condition
Genuine OEM
Brand
GE
Function
Measures compartment or evaporator temperature and reports it to the control board
Typical Resistance
Approx. 5,000 ohms at 77°F
Repair Difficulty
Easy — typically under 1 hour
Quantity
1 temperature sensor
Compatible Brands
GE, Hotpoint, Kenmore
Installation Notes
⚠️ Danger — Authorized Service Part Required For Flammable Refrigerant Systems GE's own service guidance carries an explicit warning for this component: it is a manufacturer-authorized service part intended for use in refrigerator models that use a flammable refrigerant, such as R600a. Using an unauthorized or incorrectly rated service part in a unit that uses a flammable refrigerant could lead to a risk of fire or explosion. Before ordering or installing, confirm your refrigerator's refrigerant type and verify this part is correct for your specific model. If you have any doubt about your refrigerant type or the correct part for your unit, contact our support team with your model number before proceeding, or have a qualified appliance technician perform this repair.
⚠️ Unplug Refrigerator Before Starting — Test With A Multimeter Before Replacing Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Before replacing, it's worth testing the old sensor with a multimeter set to ohms — a healthy sensor reads approximately 5,000 ohms at 77°F; a reading well outside that range, or an open circuit, confirms a failed sensor. Locate the sensor, typically mounted on an interior wall of the compartment or clipped to the evaporator coil depending on your model. Photograph the wiring and mounting position before disconnecting anything. Disconnect the sensor's wire connector, remove any mounting clip or bracket, and pull the old sensor free. When positioning the new WR55X10025, make sure it sits in open air away from direct contact with ice buildup areas, since ice touching the sensor can cause it to read colder than the compartment's actual temperature. Reconnect the wire connector and secure the mounting clip. Restore power and monitor the refrigerator over the next 24 hours, comparing the display temperature to an independent thermometer placed in the compartment to confirm accuracy. Tools needed: multimeter, work gloves.
Frequently Asked Questions
How do I test whether this sensor has actually failed?
Use a multimeter set to ohms and test the sensor across its two terminals. A healthy sensor typically reads approximately 5,000 ohms at 77°F room temperature; a reading significantly outside that range, or no reading at all (open circuit), confirms the sensor has failed and should be replaced.
My display shows a temperature that doesn't match how cold the fridge actually feels. Could positioning be the issue, not the sensor itself?
Yes, this is a documented and somewhat subtle failure mode. If the sensor ends up positioned too close to an area where ice or frost accumulates, the ice's surface temperature can pull the sensor's reading colder than the actual compartment air temperature, causing the display to show a colder number than reality — sometimes off by several degrees. One customer traced exactly this issue to ice buildup near the sensor location and resolved it by ensuring the new sensor sat clear of that ice-prone area during installation.
Could my problem actually be the control board instead of this sensor?
It's worth testing this sensor first before assuming a control board issue. This is a relatively inexpensive part, and it's commonly the actual root cause behind symptoms that get misdiagnosed as a control board failure, since the board is only ever as accurate as the temperature data it receives. Testing or simply replacing this sensor is a low-cost step worth taking before pursuing a more expensive board repair.
Why is there a fire/explosion warning on this part?
Some refrigerators use a flammable refrigerant, such as R600a (isobutane), instead of older non-flammable refrigerants. Electrical components near refrigerant lines can be a source of ignition if a leak were ever present, which is why GE requires an authorized, correctly rated service part for these systems rather than a generic substitute. Confirming your model and refrigerant type before ordering is the appropriate precaution.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original resistance curve and mounting configuration of the temperature sensor originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DA32-10105RCM Refrigerator Temperature Sensor
Replaces Part Numbers: DA32-10105R, DA32-00006W, DA32-00006U, 2030342, DA32-00006B, DA32-00006C, DA32-00006D, DA32-00006L, DA32-00006M, DA32-00006T, DA32-00006V, AP4135567, PS4138681.
1" probe, 25.75" lead with two pin connectors.
Fits Specific Samsung Refrigerator Models.
This Defrost Sensor is a replacement part designed specific Samsung refrigerator models. This sensor, sometimes referred to as a defrost thermostat or defrost temperature sensor, is an integral part of your refrigerator's defrost system.
This is an aftermarket part that can be used as a replacement for the OEM part.
WR9X502 Refrigerator Genuine OEM Defrost Timer
Description: This Defrost Timer is an OEM part for GE refrigerators. This part manages the defrost cycle of the fridge and freezer compartments, ensuring that the evaporator coils do not build up excessive frost. This cycling is crucial for maintaining optimal temperatures for food preservation and energy efficiency. Over time, the defrost timer can malfunction due to wear, electrical issues, or a buildup of dust and debris, leading to poor performance or failure.
Replaces Part Numbers:WR9X502, WR09X10049, WR09X0278, WR09X0283, WR09X0313, WR09X0329, WR09X0334, WR09X0339, WR09X0342, WR09X0350, WR09X0356, WR09X0363, WR09X0364, WR09X0366, WR09X0375, WR09X0387, WR09X0408, WR09X0409, WR09X0418, WR09X0419, WR09X0428, WR09X0432, WR09X0438, WR09X0466, WR09X0468, WR09X0470, WR09X0478, WR09X0479, WR09X0481, WR09X0484, WR09X0486, WR09X0487, WR09X0490, WR09X0495, WR09X0502, WR09X0503, WR09X0504, WR09X0526, WR09X0528, WR09X0576, WR09X0594, WR09X5161, WR09X5162, WR09X5163, WR09X5164, WR09X5192, WR09X5202, WR09X5204, WR09X5211, WR09X5225, WR9X10049, AH310869, EA310869, AP2061708, PS310869.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO DA32-10104N Refrigerator Temperature Sensor
The XPARTCO DA32-10104N is an aftermarket replacement refrigerator temperature sensor (thermistor) compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators. This sensor is mounted on or near the evaporator coil and continuously monitors the internal temperature of the refrigerator compartment, transmitting real-time readings to the electronic control board.
Based on the data received from the sensor, the control board regulates the compressor, evaporator fan motor, and defrost system to maintain the set temperature. When this sensor fails or drifts out of calibration, the control board receives inaccurate temperature readings — leading to a refrigerator that runs too cold, too warm, or triggers a 5E/SE error code. Features a 9-inch cord for easy installation and a sensitive thermal element with temperature detection accuracy of ±0.1°C.
Quick Answer
The XPARTCO DA32-10104N Refrigerator Temperature Sensor fixes refrigerators that are too warm, too cold, display a 5E/SE error code, or have inconsistent temperatures that spoil food. It monitors internal refrigerator temperature and sends data to the control board to regulate cooling. Compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators.
Common Problems This Part Fixes
Refrigerator running too warm — food spoiling faster than normal
Refrigerator running too cold — food or drinks freezing in the fresh food section
5E or SE error code displayed on the control panel
Inconsistent or fluctuating temperatures inside the refrigerator
Compressor running continuously without reaching set temperature
Excessive frost or ice buildup on evaporator coils
Replaces Part Numbers
This sensor directly replaces the following OEM and cross-reference part numbers:
DA32-10104N, DA32-10104V, 2030330, ASM1216617, PD00026468, EAP4138666, AP4979323, PS4138666.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This temperature sensor is compatible with select refrigerators from the following brands:
Samsung French door refrigerators
Samsung side-by-side refrigerators
Samsung bottom freezer refrigerators
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Monitors internal refrigerator temperature and sends real-time data to the electronic control board
Fixes 5E/SE error codes caused by a faulty or out-of-calibration temperature sensor
Temperature detection accuracy of ±0.1°C for precise cooling control
9-inch cord length for easy installation and connection to the control board
Aftermarket replacement built to OEM-equivalent quality standards
Direct drop-in replacement — no modification required
DIY-friendly repair — installs with basic hand tools in 30–45 minutes
Product Specifications
Part Number
DA32-10104N
Part Type
Refrigerator Temperature Sensor (Thermistor)
Condition
Aftermarket Replacement
Application
Refrigerator Temperature Control System
Cord Length
9 inches
Detection Accuracy
±0.1°C
Resistance at 70°F
~9.3K ohms
Resistance at 90°F
~7.7K ohms
Resistance at 100°F
~6.2K ohms
Resistance at 120°F
~4.3K ohms
Compatible Brands
Samsung
Installation Notes
⚠️ Safety First — Unplug Refrigerator Before Starting Unplug the refrigerator from the power source before beginning any repair. Safely remove and store any food that could deteriorate while the power is off. Wear work gloves to protect your hands. The DA32-10104N sensor is located near the evaporator coil, typically behind the rear panel inside the refrigerator or freezer compartment. Remove the panel, locate the sensor along the yellow wire, disconnect the old sensor from its plug, and connect the new sensor in the same position. Reassemble the panel and restore power. Allow 24 hours for the refrigerator to return to normal operating temperature. Tip: Before replacing, test the old sensor with a multimeter — resistance readings outside the values in the specs table above confirm a faulty sensor. Consult your refrigerator's service manual for model-specific instructions.
Frequently Asked Questions
Will the DA32-10104N fit my Samsung refrigerator?
This sensor is compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators. Use the model search above to verify your model, or contact our support team before ordering.
What does the temperature sensor do?
The temperature sensor (thermistor) continuously monitors the internal temperature of the refrigerator and sends readings to the electronic control board. The control board uses this data to regulate the compressor, fans, and defrost system to maintain the set temperature. When the sensor fails or drifts out of range, the control board receives inaccurate data and cannot maintain proper cooling.
What are signs that my temperature sensor needs replacement?
Common signs include: the refrigerator running too warm or too cold, food spoiling faster than normal, a 5E or SE error code on the display, inconsistent temperatures, or the compressor running continuously without reaching the set temperature.
How do I test the DA32-10104N sensor before replacing it?
Use a multimeter to measure the resistance across the sensor terminals. At 70°F the reading should be approximately 9.3K ohms, at 90°F approximately 7.7K ohms, at 100°F approximately 6.2K ohms, and at 120°F approximately 4.3K ohms. Readings significantly outside these values indicate a faulty sensor that needs replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is designed to deliver reliable, accurate temperature sensing at a more affordable price point.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
DA31-00146E Genuine OEM Refrigerator Evaporator Fan Motor - Compatible with Samsung, Maytag
Product Description
Maintain optimal cooling with the DA31-00146E Genuine OEM Refrigerator Evaporator Fan Motor. This Samsung-manufactured motor is designed as a replacement for select Samsung and Maytag refrigerators. It powers the fan to circulate air through the freezer and refrigerator compartments, ensuring even temperature distribution and efficient cooling. This part addresses issues like fridge/freezer too warm, frost buildup, unusual noises, or the appliance not shutting off, often caused by a faulty or seized motor.
Note: Includes (1) evaporator fan motor (fan blade not included). Disconnect power before installation. Verify compatibility with your refrigerator model.
Replaces part numbers: DA31-00146E, 1486536, DA31-00146G, DREP3020LA/HAL, PD00002015, AP4136569, PS4138376.
Compatibility:
Compatible with select refrigerator models, including but not limited to:
Samsung: RFG238AABPXAA0000, RS25H5111BC/AA, RS265TDBP/XAA, RS267TDBP/XAA, RH25H5611BC/AA, RH25H5611WW/AA, DFSF9VKBABB, DFSS9VKBASS
Maytag: Various models (verify with model number)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung and Maytag refrigerators.
🔧 Specifications: Genuine OEM Samsung BLDC fan motor, 3.21W, 12VDC, 2520RPM, 1-1/2" shaft.
💪 Reliable Performance: Circulates air to maintain consistent temperatures and cool evaporator coils.
🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 30–60 minutes.
🛡️ Effective Fixes: Resolves warm fridge/freezer, frost buildup, noisy operation, or failure to shut off.
Product Specification
Part Number: DA31-00146E
Component Type: Refrigerator evaporator fan motor
Material: Metal and plastic
Electrical Specs: 3.21W, 12VDC, 2520RPM, 1-1/2" shaft
Compliance: UL-listed, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator cooling efficiently today!
Add to cart now for a reliable fix!
