Search results for "refrigerator water filters"

MJU62070602 Genuine LG OEM Refrigerator Water Line Plastic tube, 5/16" - 79 inches in length Replaces Part Number: MJU62070602, 5210JA3004R, 5210JA3004U, MJU62070606, 2676818, 5210JA3004B, 5210JA3029U, AH3536013, EA3536013, MJU62070601, MJU62070611, MJU62070615, AP4681126, PS3536013.  Water tubing MJU62070602 is an original equipment manufacturer (OEM) part that fits some Kenmore, Kenmore Elite and LG refrigerators. Water tubing MJU62070602 supplies water to refrigerator components that require water such as the ice maker and water dispenser. Replaces original refrigerator water tubing part numbers 5210JA3004U, 5210JA3029U, MJU62070601 and MJU62070606. Fits some Kenmore and Kenmore Elite 795-series refrigerators. Also fits some LG refrigerators in these series: LFD, LFX, LMX, LRFD, LRSC and LSC.  

Read more less

WR57X30890 Refrigerator Genuine Water Valve Water inlet valve assembly with Wire Harness Replaces Part Numbers: WR57X30890, WR57X26569, WR57X30891, AP6891693, PS12727426. Description: This water inlet valve is a Genuine OEM part for select GE Refrigerator models, responsible for controlling the flow of water into the refrigerator's ice maker and water dispenser. It is typically located at the back of the appliance, near the water supply line. The water inlet valve features quick-connect fittings for easy installation and ensures a reliable and steady supply of water for ice production and dispensing.  

Read more less

W10865826 Refrigerator Water Valve - Compatible with Whirlpool, KitchenAid, Maytag, JennAir, Kenmore Product Description Restore your refrigerator’s ice and water dispensing functionality with the replacement W10865826 Refrigerator Water Valve. This replacement part is designed for select Whirlpool, KitchenAid, Maytag, JennAir, and Kenmore refrigerators, ensuring precise water flow control for the ice maker or water dispenser. It resolves issues like no ice production, no water dispensing, or leaks, offering reliable performance and durability. Note: Disconnect power and water supply before installation. Verify model compatibility for proper fit. Replaces part numbers: W10865826, W10394076, WPW10394076, 4459687, W10726788, W10833705, W10872966, PD00041363, EAP11738056, AP6026312, PS11738056.  Compatibility: Compatible with models including but not limited to: Whirlpool: WRF736SDAM, WRF767SDHZ, WRX986SIHZ, KRFF507HPS KitchenAid: KRMF706ESS Maytag: MFI2570FEZ JennAir: JFX2897DRM Kenmore: 10651753710 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand Compatibility: Fits select Whirlpool, KitchenAid, Maytag, JennAir, and Kenmore refrigerators. 🔥 Specifications: Water inlet valve with solenoid, electrical connectors, and water line fittings. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires screwdriver, wrench, pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no ice, no water dispensing, or water leaks. Product Specification Part Number: W10865826 Component Type: Refrigerator water inlet valve Material: Plastic housing, metal fittings, electrical connectors Mounting: Secures to refrigerator frame with screws Operating Conditions: Suitable for refrigerator water systems Compliance: UL-listed components, Prop 65 warning for California Installation Notes: Safety First: Disconnect the refrigerator from power and water sources before installation. Follow the owner’s manual for guidance. Use plumber’s tape on threaded connections to prevent leaks. Shop for high-quality replacement appliance parts with a 30-day return policy. Fix your refrigerator today! Add to cart now for a reliable solution!

Read more less

W10341320 (OE) Refrigerator Water Inlet Valve The W10341320 (OE) is an Original Equipment (OE) replacement dual secondary water inlet valve compatible with a wide range of Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerators. This dual-solenoid valve controls water flow to two destinations — the refrigerator's water dispenser and the ice maker. Each solenoid opens independently when the control board calls for water at that destination, and closes the moment the call is dropped. When one or both solenoids fail, you lose water at the dispenser, ice production stops or slows, or the valve begins leaking at its connections. Rated 110/120V, 50/60Hz. Dual solenoid: W1 = 20W, W2 = 35W. Important: this is the SECONDARY valve, not the primary water inlet valve — many Whirlpool side-by-side refrigerators use both, and if your primary valve is working fine but you're still losing water or ice, the secondary valve is the likely culprit. It directly replaces WPW10341320, AP6019939, PS11753250, EAP11753250, 1937969, and K-78032. Common repair for leaks at the valve connections. Installs in about 30 minutes with basic hand tools and novice repair experience. Quick Answer The W10341320 (OE) Refrigerator Water Inlet Valve fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore side-by-side refrigerators with no water through the door, an ice maker that won't make ice or makes too little ice, or leaking at the valve connections. Dual secondary valve — dual solenoid (W1=20W, W2=35W), 110/120V, 50/60Hz. Original Equipment (OE) — same design and performance as the factory part, without the OEM label. Replaces WPW10341320, AP6019939, PS11753250, EAP11753250, 1937969, K-78032. This is the SECONDARY valve — not the primary water inlet valve (W10238100). Common Problems This Part Fixes No water dispensing through the door — dispenser solenoid failed Ice maker not making ice — ice maker solenoid failed Ice maker dispensing too little ice — solenoid partially failed or restricted Water leaking from the valve or its connections Water dispenser works but ice maker doesn't (or vice versa) — one of the two solenoids has failed Weak or slow water flow at the dispenser Ice cubes coming out hollow, small, or misshapen from insufficient water fill Valve buzzing or humming without opening Primary valve tests fine but the refrigerator still won't dispense water or make ice Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dual secondary water inlet valve directly replaces the following OEM and cross-reference part numbers: W10341320, WPW10341320, AP6019939, AWP49977, PD00004978, PS11753250, EAP11753250, 1937969, K-78032 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Note: the primary water inlet valve on many of these refrigerators is a different part (W10238100 / WPW10238100) — see the FAQ below on primary vs secondary valves. Compatibility This dual secondary water inlet valve is compatible with select side-by-side refrigerators from the following brands: Whirlpool side-by-side refrigerators — select models (verify with parts diagram) Maytag side-by-side refrigerators — MSB26C6MDE00/DE02, MSB26C6MDH00/DH02, MSB26C6MDM00/DM02, MSB27C2XAB00, MSB27C2XAM00, MSB27C2XAW00, MSC21C6MDM00/DM02, MSC21C6MEZ00, MSC21C6MFZ00, MSS26C6MEZ00, MSS26C6MFB00/FB01, MSS26C6MFW00 and related models Jenn-Air side-by-side refrigerators — JSC23C9EEM00, JSC24C8EAM00/AM01/AM02 and related models KitchenAid side-by-side refrigerators — select models Amana, Magic Chef, Admiral, Norge, Roper side-by-side refrigerators — select Whirlpool-built models Kenmore / Sears side-by-side refrigerators — select Whirlpool-built models Important — This Is the SECONDARY Valve, Not the Primary: Many Whirlpool-platform side-by-side refrigerators use TWO water inlet valves: a primary valve (typically W10238100 / WPW10238100) where the household water line enters the refrigerator, and this dual secondary valve (W10341320) that splits flow between the dispenser and the ice maker. If your primary valve is functioning correctly but you're still not getting water or ice, the secondary valve is the likely culprit. Before ordering, confirm which valve your refrigerator's parts diagram calls for at the position you're replacing. Contact our support team with your model number if you're unsure. Key Features Original Equipment (OE) replacement — produced to the same design and performance standards as the factory part but not sold under the appliance brand's OEM label; provides the same fit and function at a more affordable price Dual secondary water inlet valve — supplies water to both the refrigerator's water dispenser and the ice maker Dual-solenoid design: each solenoid opens independently when the control board calls for water at that destination Electrical specs: 110/120V, 50/60Hz · W1 = 20W, W2 = 35W Resolves "no water through door," "ice maker doesn't make ice," "too little ice," and "leaking at connections" symptoms Common fix for leaks at the valve's water line connections Replaces WPW10341320, AP6019939, PS11753250, EAP11753250, 1937969, and K-78032 Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerators Note: this is the SECONDARY valve — the primary water inlet valve is a different part (W10238100) DIY repair — installs in about 30 minutes with basic hand tools and novice repair experience Product Specifications Part Number W10341320-OE Designation OE (Original Equipment) OEM Part Number WPW10341320 Part Type Refrigerator Dual Secondary Water Inlet Valve Condition OE Replacement Application Side-by-Side Refrigerators (Whirlpool platform) Valve Position SECONDARY (not the primary inlet valve) Solenoids Dual — W1 = 20W, W2 = 35W Voltage 110/120V Frequency 50/60 Hz Supplies Water To Water dispenser + Ice maker Related Part Primary Water Inlet Valve (W10238100 / WPW10238100, sold separately) Compatible Brands Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore Installation Notes ⚠️ Unplug Refrigerator and Shut Off Water Supply Before Starting — Wear Work Gloves Unplug the refrigerator (or shut off the house circuit breaker for the appliance) and turn off the refrigerator's water supply at the shutoff valve before beginning. Wear work gloves to protect your hands. Safely store any food that could spoil during the repair. Have towels ready — residual water remains in the lines and will spill when disconnected. Pull the refrigerator away from the wall to access the rear. The secondary water inlet valve is typically mounted at the back of the refrigerator, downstream of the primary valve where the household water line enters. Photograph the water line and wire harness connections before disconnecting anything — with two solenoids and multiple water lines, correct reconnection matters. Disconnect the water lines from the valve (use a 1/2" wrench where needed) and catch any residual water with a towel. Disconnect the electrical connectors from both solenoids. Remove the mounting screws holding the valve bracket in place and lift out the old valve. Install the new W10341320 (OE) valve in the same position and orientation, secure the mounting hardware, and reconnect the water lines — tighten fittings snugly without over-torquing. Reconnect the electrical connectors to the correct solenoids, matching your photos. Turn the water supply back on and check every connection for leaks BEFORE pushing the refrigerator back into place. Restore power. Run water through the dispenser for a few minutes to purge air from the lines, and discard the first few batches of ice. Tools needed: Multi-screwdriver, 1/2" wrench, nut driver, towels, work gloves. Frequently Asked Questions What does "OE" mean and how is it different from Genuine OEM? OE (Original Equipment) parts are produced to the same design and performance standards as the original factory part, but they are not sold under the appliance brand's OEM label. They provide the same fit and function as the OEM part at a more affordable price. The W10341320 (OE) water inlet valve matches the electrical specifications (110/120V, 50/60Hz, dual solenoid W1=20W / W2=35W), dual-secondary valve design, connections, and physical fit of the original Whirlpool OEM part, and installs identically. The main difference from a Genuine OEM Whirlpool part is the branding and warranty — the OE version delivers equivalent performance without the OEM price premium. What's the difference between the primary and secondary water inlet valve? Many Whirlpool-platform side-by-side refrigerators use two water inlet valves working in series. The primary valve (typically W10238100 / WPW10238100) is where the household water supply line first enters the refrigerator — it's the main gatekeeper for water entering the appliance. The secondary valve (this W10341320) sits downstream and splits that flow between the water dispenser and the ice maker via its two independent solenoids. Both can fail independently. The key diagnostic: if the primary valve is working correctly (water is reaching the refrigerator) but you're still not getting water at the dispenser or ice from the ice maker, the secondary valve is the likely culprit. Check your model's parts diagram to confirm which valve you need. My water dispenser works but the ice maker doesn't — can this still be the valve? Yes, absolutely. This is a dual-solenoid valve — one solenoid feeds the water dispenser, the other feeds the ice maker. They fail independently. If your dispenser works fine but the ice maker isn't getting water (no ice, or hollow/small cubes), the ice maker solenoid on this valve may have failed while the dispenser solenoid still works. The reverse is also true. Before replacing the valve, also verify the ice maker itself is turned on (check the wire signal arm position) and that the water line to the ice maker isn't frozen or kinked — those produce similar symptoms. Is this a common fix for leaks? Yes — leaks at the water inlet valve's connections are one of the most common reasons this part gets replaced. Over time, the valve body or its fittings can develop cracks or the internal seals can degrade, producing a slow drip that pools behind or under the refrigerator. If you've found water behind your fridge and traced it to the valve area, replacing the valve typically resolves it. When installing the new valve, tighten the water line fittings snugly but don't over-torque them — over-tightening can crack the fitting and create a new leak. Always check all connections for leaks before pushing the refrigerator back against the wall. Should I flush the water lines after installing the new valve? Yes. After the new valve is installed and the water supply is restored, run water through the dispenser for several minutes to purge trapped air from the lines — air pockets cause sputtering and inconsistent flow. Also discard the first two or three batches of ice the ice maker produces, since they may contain air, debris, or residual manufacturing material from the new valve. After that, water and ice should return to normal quality and flow. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ OE (Original Equipment) Quality ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO W10498976 Refrigerator Water Inlet Valve Replaces WPW10498976 The XPARTCO W10498976 is an aftermarket replacement refrigerator water inlet valve assembly compatible with select Whirlpool, Maytag, KitchenAid, Kenmore, and Ikea bottom-freezer and French door refrigerators in the WRB, WRF, MBF, GX5, GB9, GB2, and related series. The water inlet valve is a solenoid-operated valve mounted on the back of the refrigerator that controls the flow of water from the household supply line to the ice maker and, on models with a door dispenser, to the water dispenser. When the solenoid coil burns out or the valve seat becomes clogged with mineral deposits, the ice maker stops producing ice, the water dispenser stops working, water trickles weakly, or water leaks from the valve body. Rated 120V, 50/60Hz, 35W solenoid, this valve measures 3-1/2"L x 2-3/4"W x 3"H and includes the valve body and mounting bracket. It connects via 1/4" inlet fitting to the household supply line and uses push-in tube fittings on the outlet side. It directly replaces WPW10498976, W10420082, W10498974, K-78200, K-78186, 2684516, 2315508, IMV-576, AP6022334, EAP11755667, PD00024636, PS11755667, WP2315576, and WV8047. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO W10498976 Refrigerator Water Inlet Valve fixes Whirlpool-family bottom-freezer and French door refrigerators where the ice maker is not making ice, the water dispenser is not working or producing only a trickle, or water is leaking from the back of the refrigerator. 120V/50-60Hz/35W solenoid, 3-1/2"L x 2-3/4"W x 3"H, includes bracket. 1/4" inlet connection. Replaces WPW10498976, W10420082, W10498974, K-78200, 2684516, AP6022334, PS11755667. Compatible with Whirlpool WRB/WRF, Maytag MBF, KitchenAid, Kenmore, and Ikea. Common Problems This Part Fixes Ice maker not producing ice or producing very small cubes due to insufficient water supply Water dispenser not working — no water flows when the lever or button is pressed Water dispenser producing only a trickle — valve partially blocked or solenoid weakening Water leaking from behind the refrigerator near the water valve Ice maker fills but overflows — valve stuck open and not closing properly Humming sound near the back of the refrigerator when requesting ice or water — solenoid energized but valve not opening No water reaching the refrigerator despite supply line being connected and pressurized Replaces Part Numbers This water inlet valve directly replaces the following OEM and cross-reference part numbers: WPW10498976, W10498976, W10420082, AWP50873, EAP11755667, PD00024636, AP6022334, PS11755667.  If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This water inlet valve is compatible with select bottom-freezer and French door refrigerators from the following brands and series: Whirlpool refrigerators — WRB322, WRB329, WRF535, WRF555, and related WRB/WRF series (French door and bottom-freezer models) Maytag refrigerators — MBF1958, MBF2258, and related MBF series KitchenAid refrigerators — select bottom-freezer and French door models Kenmore / Sears refrigerators — select Whirlpool-built models Ikea refrigerators — select models (Whirlpool-built) Other Whirlpool-platform models including GB9, GB2, GX5, GX2, ET1CH, ET8CH, IX5HH, ED22, and related series Note: Always verify your exact model number before ordering — water inlet valves are model-specific and not universal across all refrigerator configurations. Check that the supply line connection size (1/4") matches your existing supply line before purchasing. Key Features Solenoid-operated valve — opens on command from the refrigerator's control board to supply water to the ice maker and water dispenser Rated 120V, 50/60Hz, 35W — correct electrical specifications for compatible Whirlpool-family refrigerators Dimensions: 3-1/2"L x 2-3/4"W x 3"H — includes mounting bracket for direct installation 1/4" inlet connection — matches standard residential refrigerator supply line diameter Push-in outlet tube fittings — easy connection to existing water supply tubing inside the refrigerator Plastic and metal construction — durable and resistant to mineral buildup Replaces WPW10498976, W10420082, W10498974, K-78200, K-78186, 2684516, AP6022334, and over 10 additional cross-references Compatible with Whirlpool WRB/WRF series, Maytag MBF series, KitchenAid, Kenmore, and Ikea refrigerators Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number W10498976 OEM Part Number WPW10498976 Part Type Refrigerator Water Inlet Valve Assembly Condition Aftermarket Replacement Application Bottom-Freezer and French Door Refrigerators Voltage 120V AC Frequency 50/60 Hz Solenoid Wattage 35W Dimensions 3-1/2"L x 2-3/4"W x 3"H Inlet Connection 1/4 inch Color Brown / Blue / Yellow / Gray Material Plastic / Metal Includes Water valve body and mounting bracket Compatible Brands Whirlpool, Maytag, KitchenAid, Kenmore, Ikea Installation Notes ⚠️ Unplug Refrigerator and Shut Off Water Before Starting Unplug the refrigerator and shut off the household water supply valve before beginning. Place a towel and small container under the valve area to catch residual water. Pull the refrigerator away from the wall to access the back lower panel — remove the panel screws to expose the water inlet valve. Photograph the wiring harness connections and water tube connections before disconnecting. Turn off the water supply and disconnect the 1/4" supply line from the valve inlet — use an adjustable wrench, as some compression fittings may be stuck. Squeeze the plastic retaining clips on the outlet tube fittings and pull the internal water tubes free. Disconnect the wiring harness. Unscrew the mounting bracket and remove the old valve. Install the new W10498976 valve with its bracket, reconnect the internal water tubes (push until they click), reconnect the wire harness and supply line. Restore water supply and power. Run a water dispenser test and check for leaks. Tools needed: Phillips screwdriver, adjustable wrench, needle-nose pliers. Frequently Asked Questions What does the refrigerator water inlet valve do? The water inlet valve is an electrically controlled solenoid valve that opens on command from the refrigerator's control board to allow household water pressure to push water through to the ice maker fill tube or the water dispenser. When the ice maker calls for water or you press the dispenser lever, the board sends voltage to the solenoid coil, which opens the valve. When the demand is satisfied, the voltage stops, the spring closes the valve, and water flow stops. A failed solenoid coil — or a valve seat clogged with mineral deposits — prevents the valve from opening or closing correctly, causing no water, weak water, overflow, or dripping. What is the difference between W10498976 and WPW10498976? These are the same water inlet valve. WPW10498976 is the updated Whirlpool OEM part number that superseded the original W10498976. The W10420082 and W10498974 are also cross-references for this same valve from earlier production runs. This aftermarket replacement is compatible with all of these numbers. How do I know if the water inlet valve has failed vs. something else? First confirm the household water supply valve behind the refrigerator is fully open and the supply line is not kinked. Then check the water filter — a clogged filter is one of the most common causes of weak or no water flow and is mistaken for a valve failure. If both supply pressure and the filter are good, test the valve's solenoid coil with a multimeter — a working coil reads 200–500 ohms of resistance; an open circuit confirms failure. If the solenoid tests good but the valve still does not open when the control board sends voltage, the valve seat may be physically clogged with mineral deposits and the valve needs to be replaced. My ice maker is not working but my water dispenser is fine — is it the valve? Possibly — but if the water dispenser works normally, the main valve solenoid is likely functioning. On some refrigerator configurations, the ice maker and the dispenser are controlled by separate solenoid ports on the valve assembly. If only the ice maker port has failed, the dispenser can continue working while ice production stops. Test the ice maker solenoid coil separately. However, a more common cause of ice maker failure with a working dispenser is the ice maker module, freezer temperature, or ice maker shut-off arm — rule out those causes before replacing the valve. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from plastic and metal to match the electrical specifications and dimensions of the original WPW10498976 water inlet valve assembly. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WR57X33326 Refrigerator OE Water Valve – Compatible with GE, Hotpoint, and Crosley Refrigerators Product Description Restore proper water and ice dispensing with the XPARTCO WR57X33326 Refrigerator OE Water Valve. This high-quality OE (Original Equipment) replacement regulates water flow from your home supply to the ice maker and dispenser. A worn or leaking valve can cause reduced ice production, no water dispensing, or unwanted drips. This OE-grade part delivers the same performance, fit, and reliability as the factory original — at a better value. What is OE ?: “OE (Original Equipment) parts are manufactured to meet the same specifications, materials, and performance standards as the original factory-installed components. XPARTCO parts are engineered to provide equivalent fit and function to OEM components while offering reliable quality at a competitive price.” Replaces Part Numbers WR57X33326, WR57X10032, WR32X10032, WR57X10040, WR57X10064, PD00063637, AP6995571, PS16226572, WR57X10051, WR57X10012, 1032629, IMV-513, IMV513, WR02X10105, WR2X10105, WR57X0092, WR57X0098, WR57X0099, WR57X0104, WR57X0111, WR57X0119, WR57X10010, WR57X10018, WR57X10018E, WR57X10051-25PK, WR57X104, WR57X111, WR57X119, WR57X92, WR57X98, WR57X99, AH901314, EA901314,  AP3672839, PS901314. Compatibility This OE water valve is compatible with select GE, Hotpoint, and Crosley refrigerators. Example compatible models include (but are not limited to): GE GSS25GSHRCSS, GE GFE29HSDASS, and Hotpoint HSS25IFMDWW. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 OE Replacement – Matches the performance and fit of the original factory part 💧 Consistent Water Flow – Controls water supply to the dispenser and ice maker 💰 Reliable Value – OE quality at a lower cost than OEM retail pricing 🛠️ DIY Installation – Installs easily with standard household tools 🛡️ Fixes Common Issues – Resolves leaks, no-ice, or water-dispensing failures 📐 Product Specification Part Number: WR57X33326 Component Type: Refrigerator Water Inlet Valve Material: Reinforced plastic with dual solenoid control Mounting: Direct-fit replacement located on rear refrigerator panel Operating Conditions: Designed for standard household water pressure Compliance: OE (Original Equipment) quality – same form, fit, and function as OEM 🛠️ Installation Notes Tools Needed: Phillips screwdriver, adjustable wrench, pliers ⚠️ Safety First: Unplug refrigerator and turn off water supply before beginning repairs. Steps: Disconnect refrigerator from power and shut off water supply. Remove rear access panel to expose the valve assembly. Detach inlet tubing and wiring connectors from the old valve. Unscrew and remove the defective valve. Mount the new XPARTCO WR57X33326 valve in place, reconnect wiring and hoses. Reinstall the access panel, turn on water and power, then test dispenser and ice maker. ⏱️ Time Required: 20–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Bring your refrigerator’s water system back to life — Add to Cart Now for an OE-quality replacement built to last!

Read more less

Genuine Refrigerator Replacement Part WPW10276792 Refrigerator Genuine Water Reservoir Tubing Genuine water reservoir tubing for select refrigerator water-dispensing systems. Product Overview The WPW10276792 Refrigerator Water Reservoir Tubing is a genuine replacement part designed for compatible refrigerators. The tubing routes and stores chilled water within the refrigerator water system before water is delivered to the dispenser. Use this part when the original tubing is leaking, cracked, kinked, damaged, or otherwise unable to maintain proper water flow. Quick Answer WPW10276792 is genuine refrigerator water reservoir tubing for compatible models. Replace it when the original tubing is leaking, split, damaged, or restricting normal dispenser water flow. Common Problems This Part May Fix Water leaking inside the refrigerator Cracked or split reservoir tubing Kinked tubing restricting water flow Reduced or inconsistent dispenser water flow Damaged tubing connections or fittings Replaces and Cross-References WPW10276792, 1874366, 2223876, 2305226, 2307107, W10204356, W10276792, W10526445, WP2305226, AP6018425, AWP50256, EAP2580224, PD00028740, PS2580224 Part number is provided for identification. This listing is for a genuine replacement part. Compatibility Fits select refrigerators that specify water reservoir tubing part number WPW10276792. Important: Verify the complete refrigerator model number and original tubing part number before ordering. Refrigerator water tubing can differ in length, routing, connector style, and reservoir design. Key Features Genuine replacement part Designed for compatible refrigerator water systems Routes and stores chilled dispenser water Helps restore proper water flow and leak-free operation Direct replacement for applications calling for WPW10276792 Product Specifications Part Number WPW10276792 Part Type Refrigerator Water Reservoir Tubing Application Compatible Refrigerators Function Water storage and routing for dispenser system Condition New Part Quality Genuine Replacement Part Package Quantity 1 Tubing Assembly Installation & Troubleshooting Notes Disconnect refrigerator power and shut off the household water supply before service. Relieve water pressure from the dispenser system before disconnecting tubing. Inspect the original tubing for leaks, splits, kinks, or damaged fittings. Route the replacement tubing in the same path and orientation as the original. Confirm all connections are fully seated and secure. Restore the water supply and carefully check for leaks before returning the refrigerator to normal use. Diagnostic tip: A dispenser leak may also come from a valve, connector, fitting, or dispenser line. Confirm the source of the leak before replacing the reservoir tubing. Frequently Asked Questions What does WPW10276792 do? It routes and stores water within the refrigerator water system before the water is delivered to the dispenser. Is WPW10276792 a genuine part? Yes. This listing is for a genuine replacement water reservoir tubing assembly. When should this tubing be replaced? Replace it if it is leaking, cracked, split, kinked, damaged, or restricting normal water flow. Will this fit every refrigerator? No. Match the complete refrigerator model number and original part number before ordering. Shop With Confidence Verify your complete refrigerator model number before purchasing. Our compatibility team can help confirm whether WPW10276792 is correct for your appliance. Genuine ReplacementWater Reservoir TubingModel Fitment SupportFast U.S. Shipping

Read more less

WR57X25917 Refrigerator Genuine OEM Water Valve Fits Specific GE Refrigerator Models. Double Water inlet Valve Replaces part Numbers: WR57X25917, 4547034, AP5999527, PS11729575. Description:  The Water Valve is a Genuine OEM component specifically designed for GE refrigerators with ice makers. Located inside the freezer compartment, it controls the flow of water to the icemaker assembly.

Read more less

XPARTCO DA82-01415A Refrigerator Water Leak Service Kit Water leak repair kit with updated internal duck bill. Fits select Samsung refrigerator models. Replaces Part Numbers: DA82-01415A, 3436781, AP5957964, PS10058968. Description: This Water Leak Repair Kit is a replacement part for select Samsung refrigerator models, this field service kit used to address water leakage and excessive frost in bottom freezer or French door refrigerators with dual evaporators. The kit includes a drain probe, two drain tubes, and two silver foam strips. With these parts, you can prevent excessive frost buildup on the evaporator cover and fix issues like water leaks under the crisper or odd fan noises that stop when the doors are opened.   This is an aftermarket part that can be used as a replacement for the OEM part

Read more less

W11645245 Genuine OEM Whirlpool Refrigerator Dual Water Valve The W11645245 is a genuine Whirlpool OEM dual water inlet valve for Whirlpool-built refrigerators. Mounted at the rear of the refrigerator where the household water line connects, this single valve is the central control point for water flow to two separate features: the ice maker and the door-mounted water dispenser. When either feature calls for water, this valve's solenoids open to admit it and close again once the request is satisfied — since one valve handles both jobs, a failure here can affect the ice maker, the dispenser, or both at the same time. Common causes of failure include mineral and sediment buildup from the household water supply interfering with the valve's internal operation over time, and electrical faults either in the valve itself or in the refrigerator's electronic control board that signals it. A failing dual water valve produces a recognizable set of symptoms: the door dispenser stops delivering water, the ice maker slows down, stops producing ice, or fails intermittently, water leaking around the valve area, or an audible electronic buzzing or humming sound coming from the back of the refrigerator. It directly replaces AP7208917, W11546685, W11446818, W11563296, and PS16875686. As a genuine OEM part, the W11645245 is manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. Quick Answer The W11645245 Genuine OEM Whirlpool Refrigerator Dual Water Valve fixes Whirlpool-built refrigerators where the door water dispenser stops working, the ice maker slows down or stops making ice, there's a leak near the valve at the back of the refrigerator, or you hear an electronic buzzing or humming sound. Controls water flow to both the ice maker and water dispenser from a single valve. Replaces AP7208917, W11546685, W11446818, W11563296, PS16875686. Before replacing, rule out a simple mineral clog and a faulty control board signal — both can produce identical symptoms to a failed valve. Common Problems This Part Fixes Water dispenser on the refrigerator door has stopped working Ice maker has slowed down, stopped producing ice, or is malfunctioning intermittently Both the ice maker and water dispenser affected at the same time Water leaking around the valve area at the back of the refrigerator Electronic buzzing or humming sound coming from behind the refrigerator Reduced water flow or pressure at the dispenser Valve that hums but doesn't appear to be passing water through Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator dual water valve directly replaces the following OEM and cross-reference part numbers: W11546685, W11446818, W11563296, AP7208917, AWP46513, K-79524K, N-86-QC N, PD00080446, PS16875686 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This dual water valve is compatible with select Whirlpool-built refrigerators across the Whirlpool family of brands, including: Whirlpool refrigerators — WRS series (including WRS321SDHZ08) Maytag, Jenn-Air, and Amana refrigerators (select models) KitchenAid, Magic Chef, Admiral, and Norge refrigerators (select models) Roper refrigerators (select models) Select Kenmore and Ikea refrigerators built on the Whirlpool platform Note: This is a dual-function valve serving both the ice maker and water dispenser from a single unit — it is not a hot/cold laundry-style valve pair. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine Whirlpool OEM part — factory-specified solenoid design and flow-rate calibration Dual water inlet valve — controls water flow to both the ice maker and door water dispenser Resolves "dispenser not working," "ice maker slow or not making ice," "leak near the valve," and "buzzing or humming noise" symptoms caused by valve failure Single central valve simplifies diagnosis and replacement compared to separate dedicated valves Direct drop-in replacement — mounts to the original rear connection point Replaces W11546685, W11446818, W11563296, AP7208917, and PS16875686 Compatible with a wide range of Whirlpool, Maytag, Jenn-Air, Amana, KitchenAid, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance Straightforward DIY repair using basic hand tools Product Specifications Part Number W11645245 Part Type Refrigerator Dual Water Inlet Valve (Ice Maker + Dispenser) Condition Genuine OEM Brand Whirlpool Location Rear of refrigerator, at the household water line connection Function Controls water flow to the ice maker and door water dispenser Connection Type 1/2" water line inlet, NPT threaded Quantity 1 valve Compatible Brands Whirlpool, Maytag, Jenn-Air, Amana, KitchenAid, Magic Chef, Admiral, Norge, Roper, Kenmore Installation Notes ⚠️ Shut Off Water Supply And Unplug Refrigerator Before Starting — Have A Towel Ready Disconnect power at the outlet, and shut off the water supply valve behind or below the refrigerator before beginning. Wear work gloves. Pull the refrigerator away from the wall for access, then locate the valve at the rear or bottom of the cabinet where the water supply line connects. Have a towel or shallow pan ready, since residual water will spill out when you disconnect the line. Photograph the wiring and water line connections before disconnecting anything. Disconnect the water supply line from the old valve, disconnect the electrical connector, and remove the mounting screws holding it in place, then pull the valve free. Install the new W11645245 in the same position, secure the mounting screws, and reconnect the electrical connector fully. Reattach the water supply line, tightening securely by hand plus a partial turn with pliers — avoid overtightening plastic threaded fittings. Restore the water supply and check the connection for leaks before restoring power. Push the refrigerator back into place, then test both the ice maker and water dispenser over the next day to confirm normal operation has returned. Tools needed: Phillips screwdriver, adjustable wrench or pliers, towel or shallow pan, work gloves. Frequently Asked Questions My dispenser stopped working but the ice maker still works. Is this the right part? It's possible, but worth checking a couple of things first, since this valve serves both features from one unit. Confirm the water supply line isn't kinked or restricted, and check the inline water filter for a clog, since a blocked filter can starve the dispenser specifically while the ice maker (which may draw from a different point in the flow path depending on your model) keeps working. If the filter and supply line are clear and the dispenser still won't deliver water, the valve itself is the likely cause. I hear a buzzing or humming sound from the back of the fridge. What does that mean? This is a common symptom of a valve that's receiving an electrical signal to open but isn't passing water through correctly — the solenoid coil energizes and hums, but water flow is restricted or absent, often due to internal mineral buildup or a failing internal mechanism. If you hear this sound whenever the ice maker or dispenser is called on, the valve is a strong suspect. Could the problem actually be my water filter instead of this valve? Yes, it's worth ruling out first. A clogged inline water filter can produce very similar symptoms to a failing valve — reduced dispenser flow, slow ice production, or both. Try replacing the water filter first if it's been a while since the last change; if symptoms persist afterward, the dual water valve is the more likely cause. Could this be a control board issue instead of the valve? It's possible. This valve is triggered electrically by the refrigerator's control board, so a fault there can produce symptoms that look identical to a failed valve — no water reaching the ice maker or dispenser even though the valve itself is fine. If replacing the valve doesn't resolve the issue, the control board is the next component worth investigating. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It includes the same dual-function solenoid design and connection configuration as the valve originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine Refrigerator Installation Part WX08X10015 Refrigerator Genuine SmartConnect Water Supply Line (15 Feet) Genuine 15-foot SmartConnect water supply line for compatible refrigerators and icemaker connections. Product Overview The WX08X10015 Refrigerator SmartConnect Water Supply Line is a genuine 15-foot refrigerator water line designed for compatible refrigerator and icemaker installations. It connects the household water supply to the refrigerator water inlet system. Use this line for a new installation or to replace a leaking, kinked, damaged, or deteriorated refrigerator water supply line. Quick Answer WX08X10015 is a genuine 15-foot refrigerator SmartConnect water supply line for compatible refrigerator and icemaker installations. Common Problems This Part May Fix Leaking refrigerator water supply line Kinked or restricted water tubing Damaged or deteriorated supply line Insufficient line length for refrigerator placement Water line replacement during refrigerator installation Replaces and Cross-References WX08X10015, 880515, AGE1244675, AP3140389, EAP311504, PD00065821, PS311504, TJ915PEX, IMKR15 Part number is provided for identification. This listing is for a genuine replacement and installation part. Compatibility Designed for compatible refrigerators and icemaker installations requiring SmartConnect water supply line part number WX08X10015. Important: Verify the refrigerator installation requirements, connection type, available space, and required line length before ordering. Key Features Genuine replacement and installation part 15-foot refrigerator water supply line Designed for compatible refrigerator and icemaker hookups Provides additional installation length for flexible placement Direct replacement for applications calling for WX08X10015 Product Specifications Part Number WX08X10015 Part Type Refrigerator Water Supply Line Product Line SmartConnect Length 15 Feet Application Compatible Refrigerators / Icemakers Condition New Part Quality Genuine Replacement Part Package Quantity 1 Water Supply Line Installation & Troubleshooting Notes Shut off the household water supply before installation. Disconnect refrigerator power if access to electrical components is required. Inspect the existing connection points for corrosion, damage, or leaks. Route the new supply line without sharp bends, pinching, or kinks. Secure the line to the household supply and refrigerator inlet according to the appliance installation instructions. Restore the water supply slowly and inspect all connections carefully for leaks. Installation tip: Leave enough slack behind the refrigerator so the appliance can be moved for service without pulling or stressing the water line. Frequently Asked Questions How long is WX08X10015? This SmartConnect water supply line is 15 feet long. What is WX08X10015 used for? It connects a compatible refrigerator or icemaker water inlet system to the household water supply. Is WX08X10015 a genuine part? Yes. This listing is for a genuine refrigerator water supply line. Will this work with every refrigerator? No. Verify the refrigerator installation requirements and connection specifications before ordering. Shop With Confidence Verify your refrigerator installation requirements before purchasing. Our compatibility team can help confirm whether WX08X10015 is suitable for your application. Genuine Replacement15-Foot Water LineInstallation SupportFast U.S. Shipping

Read more less

ERP 12544002 Refrigerator Water Valve Replaces Part Numbers: WP12544002, 12544002, 8171096, 915068, AP6005463, PS11738512. Primary Water Inlet Valve Description: This Primary Water Inlet Valve is a replacement part for select Kenmore, Maytag, Whirlpool refrigerator models. This valve controls the flow of water into the refrigerator's ice maker and water dispenser. Common causes of a bad primary water inlet valve can include mineral deposits or debris clogging the valve, electrical issues such as faulty solenoids, and general wear and tear from frequent use.     This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less