WP389140 Genuine OEM Whirlpool Washer Drive Block
The WP389140 is a genuine Whirlpool OEM drive block for large-capacity belt-drive and direct-drive top-load washers. This is a purely mechanical coupling component: it connects the inner spin basket to the transmission's drive shaft, so that when the transmission turns, the basket turns with it. Without a properly seated drive block, the connection between the motor's rotational power and the basket is lost or unreliable, even though every electrical component in the washer may be working perfectly.
Measuring approximately 2-5/16" high, this drive block is a wear component subject to gradual mechanical stress every time the washer agitates or spins. A worn or failed drive block produces a distinctive set of symptoms: the basket may spin freely without properly engaging, the washer may spin slowly and leave clothes excessively wet, or you may hear a loud knocking or banging noise during operation as the connection between the basket and drive shaft becomes loose or worn. It directly replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, and 2858.
Quick Answer
The WP389140 Genuine OEM Whirlpool Washer Drive Block fixes Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis top-load washers with a basket that spins freely without engaging, slow spinning that leaves clothes excessively wet, or loud knocking/banging noise during operation. Approximately 2-5/16" high. For large-capacity belt-drive and direct-drive washers. Replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, 2858. This repair typically requires a spanner wrench to remove a large securing nut — budget for the right tool before starting.
Common Problems This Part Fixes
Washer basket spins freely without properly engaging during the wash or spin cycle
Washer spins slowly, leaving clothes excessively wet at the end of a cycle
Loud knocking or banging noise during operation
Washer shakes or moves noticeably during spin
Basket continues spinning after the cycle should have stopped
Inefficient wash and spin cycles overall due to poor basket engagement
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drive block directly replaces the following OEM and cross-reference part numbers:
WP389140, 389140, 357782, 97360, PD00002363, EAP11741977, WP389140VP, AP6008836, AWP47839, J27-936, PS11741977.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive block is compatible with select Whirlpool large-capacity top-load washers (belt-drive and direct-drive), and also fits select Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis washers built on the Whirlpool platform, including model numbers such as:
NTW4516FW, NTW4516FW3, NTW4516FW4
WTW4816FW2, WTW4816FW3
RTW4516FW, NTW4605EW, WTW4800BQ
Note: Always verify your full model number before ordering, since Whirlpool uses different drive block designs across its washer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified fit for a secure basket-to-transmission connection
Connects the inner spin basket to the transmission's drive shaft
Resolves "basket spins freely," "slow spin, clothes too wet," and "loud knocking noise" symptoms caused by drive block wear
Approximately 2-5/16" high
Designed for large-capacity belt-drive and direct-drive washer platforms
Direct drop-in replacement matching the original fit onto the spin tube notches
Replaces 389140, AP6008836, 357782, 97360, J27-936, PS11741977, PS349903, AP2905773, WH40X180, WP389140VP, LP16171, and 2858
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, and Inglis washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WP389140
Part Type
Washer Drive Block
Condition
Genuine OEM
Brand
Whirlpool
Application
Large-Capacity Belt-Drive and Direct-Drive Top-Load Washers
Height
Approx. 2-5/16 in.
Function
Connects the inner spin basket to the transmission drive shaft
Related Component
Drive cam (commonly inspected/replaced during the same repair)
Repair Difficulty
Moderate — spanner wrench and washer disassembly required
Quantity
1 drive block
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Admiral, Amana, Crosley, Estate, Inglis
Installation Notes
⚠️ Unplug Washer And Shut Off Water Supply Before Starting — Spanner Wrench Required Disconnect power at the outlet or shut off the circuit breaker, and shut off the hot and cold water supply valves before beginning. Wear work gloves. Remove the washer's top and control console per your model's service instructions to access the inner tub assembly. Remove the agitator and any hardware securing the basket, which typically includes a large center nut — a spanner wrench is required to remove this nut, along with a socket and long extension for other fasteners; expect to remove a fair number of components to fully access the drive block. Lift the wash basket out to expose the drive block, which sits on the spin tube near the center of the transmission. Photograph the orientation of the old drive block and any surrounding hardware before removing it. Lift the old drive block free, and while it's accessible, inspect the drive cam nearby for wear as well, since it's commonly replaced at the same time. Slide the new WP389140 drive block into position, making sure it seats fully onto the spin tube notches, and reassemble the basket, hardware, agitator, console, and top panel in reverse order. Restore water and power, then run a test cycle through both wash and spin to confirm the basket engages properly with no unusual noise. Tools needed: multi-screwdriver, spanner wrench, socket set with long extension, work gloves.
Frequently Asked Questions
My washer basket spins freely and doesn't seem connected to anything. Is this the drive block?
Yes, this is the classic symptom of a failed drive block. Since this component is the mechanical link between the transmission's drive shaft and the inner spin basket, once it wears out or fails, the basket can spin independently without properly engaging, even though the motor and transmission are working normally.
Do I really need a spanner wrench for this repair?
Yes, on most models. Accessing the drive block requires removing a large nut that secures the basket assembly, and this nut is specifically designed to be removed with a spanner wrench rather than a standard socket. Trying to remove it without the correct tool risks damaging the nut or the surrounding components, so it's worth having one on hand before you start.
Should I replace the drive cam at the same time?
It's worth inspecting while you have the assembly open, since the drive cam sits in the same area and is commonly replaced alongside the drive block when a technician is already this far into the repair. If it shows visible wear, replacing both at once saves you from repeating this same teardown again soon after.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original dimensions and fit of the drive block originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WD19X25278 Dishwasher Diverter Assembly
The XPARTCO WD19X25278 is an aftermarket replacement diverter assembly for GE dishwashers, and also fits select Hotpoint, Haier, Monogram, and Café models. This assembly controls the flow of water to the spray arms, directing wash water to the upper or lower spray arm at the correct point in the cycle for thorough, even cleaning.
The assembly includes a valve and float mechanism designed to optimize water flow while minimizing noise. Common causes of failure include a worn or cracked diverter valve, or a rubber boot/hose connection that develops a leak over time. Symptoms of a failing diverter assembly include water pooling underneath the dishwasher, poor washing performance from one or both spray arms, or unusual noise during the wash cycle. It directly replaces AP6871922, WD18X21678, 4922277, PS12710077, WD00X25260, WD19X25259, and WD19X25278-25PK.
Quick Answer
The XPARTCO WD19X25278 Dishwasher Diverter Assembly fixes GE, Hotpoint, Haier, Monogram, and Café dishwashers with water pooling underneath the unit, poor washing performance from the spray arms, or unusual noise during the cycle. Replaces AP6871922, WD18X21678, 4922277, PS12710077, WD00X25260, WD19X25259, WD19X25278-25PK. Make sure the diverter is fully engaged with the spout on the wash pump before tightening the hose clamp — one customer had the tube cut when tightening the clamp without full engagement first.
Common Problems This Part Fixes
Water pooling or leaking underneath the dishwasher
Poor washing performance from one or both spray arms
Unusual noise during the wash cycle
Water not properly directed to the correct spray arm
Inconsistent cleaning results between the upper and lower racks
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher diverter assembly directly replaces the following OEM and cross-reference part numbers:
WD19X25278, 4466639, 4922277, WD00X25260, WD18X21678, WD19X25259, WD19X25278-25PK, AP6024268, AP6871922, AGE24645, PD00049646, EAP11736568, EAP12710077, PS11736568, PS12710077
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This diverter assembly is compatible with select GE dishwashers, and also fits select Hotpoint, Haier, Monogram, and Café dishwashers built on the GE platform, including model numbers such as ADT521PGJ0BS, ADT521PGJ0WS, ADT521PGJ2BS, GDT655SGJ5BB, GDF510PGJ0BB, GDF511PGM0WW, GDF520PGJ0BB, and GDF530PGM0BB.
Note: The assembly may include multiple parts depending on your model — refer to your appliance's parts diagram for a complete list. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement diverter assembly — controls water flow to the spray arms
Resolves "water pooling underneath," "poor spray arm performance," and "unusual noise" symptoms
Valve and float assembly engineered to optimize water flow while minimizing noise
Direct drop-in replacement matching the original mounting and connections
Replaces AP6871922, WD18X21678, 4922277, PS12710077, WD00X25260, WD19X25259, and WD19X25278-25PK
Compatible with GE, Hotpoint, Haier, Monogram, and Café dishwashers
Aftermarket replacement built to OEM-equivalent quality standards
DIY-friendly repair
Product Specifications
Part Number
WD19X25278
OEM Part Number
WD19X25278
Part Type
Dishwasher Diverter Valve Assembly
Condition
Aftermarket Replacement
Function
Controls water flow direction to the upper and lower spray arms
Design
Valve and float assembly
Repair Difficulty
Easy to Moderate — DIY-friendly
Quantity
1 diverter assembly
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Dishwasher And Shut Off Water Supply Before Starting — Fully Engage The Spout Before Tightening The Clamp Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Open the dishwasher door and remove the racks to expose the bottom of the dishwasher. Locate the diverter assembly at the bottom of the unit and remove the two screws securing it in place. Disconnect the old assembly from the wash pump spout and any hose connections. Before tightening the hose clamp on the new assembly, make sure the diverter is fully and securely engaged with the spout on the wash pump. One customer had their diverter's tube cut when the clamp was tightened without the assembly being fully seated first — take your time to confirm a proper seat before applying clamp pressure. Secure the new WD19X25278 assembly in place with the two mounting screws. Reconnect any hose connections and reinstall the dish racks. Restore the water supply and power, then run a test cycle — ideally checking underneath the unit partway through — to confirm no leaking from the diverter area and correct water distribution to both spray arms. Tools needed: Phillips screwdriver, pliers, work gloves.
Frequently Asked Questions
I'm seeing water pooling under my dishwasher. Is this the part I need?
Yes, this is a commonly documented symptom. If the diverter's rubber boot or hose connection has developed a leak, water can spray or drip during the wash cycle and collect underneath the unit. One customer traced their leak to a factory-defective hose in the diverter assembly, and unfortunately the leaking water had also gotten into their circulation pump motor over several loads, eroding the motor brushes — so it's worth inspecting the pump motor as well if you've had a diverter leak for a while before noticing it.
Any tips to avoid damaging the new part during installation?
Yes — make sure the new diverter is fully engaged with the spout on the wash pump before tightening the hose clamp. One customer's first replacement part was ruined because the clamp was tightened before the assembly was properly seated, which cut into the tube. Taking an extra moment to confirm a full, secure connection before clamping down prevents this.
Is this a difficult repair?
No, this is generally a DIY-friendly repair. It involves removing the dish racks, unscrewing two mounting screws to access the diverter at the bottom of the dishwasher, and swapping the assembly, typically without needing to pull the dishwasher out from under the counter.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the valve and float design, mounting configuration, and connections of the original WD19X25278 diverter assembly used in compatible GE, Hotpoint, Haier, Monogram, and Café dishwashers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
3W40025L Genuine LG OEM Dishwasher Micro Switch – Compatible with LG Dishwashers
Product Description
Restore proper operation to your dishwasher with the 3W40025L Genuine LG OEM Dishwasher Micro Switch. This small but essential component detects door position or button activations, ensuring cycles start and stop correctly. A failed micro switch can cause the dishwasher not to run, stop mid-cycle, or display error codes. Replacing it with this genuine LG part restores dependable performance and safety.
Replaces Part Numbers
3W40025L, D3V-16G-1C25, PD00035953, EAP5574491, AP5650845 PS5574491.
Compatibility
This micro switch is compatible with select LG dishwashers.
Example compatible models include (but are not limited to): LG LDF7774ST, LDF8764ST, and LDF6810ST.
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 OEM Replacement – Genuine LG part for reliable performance
🔒 Cycle Safety – Ensures proper door detection and cycle control
💰 Cost-Effective OEM Part – Built to last with factory-tested quality
🛠️ Easy to Install – Small component, quick replacement with basic tools
🛡️ Fixes Common Issues – Resolves dishwashers not starting, stopping mid-cycle, or showing error codes
📐 Product Specification
Part Number: 3W40025L
Component Type: Dishwasher Micro Switch, 16A 125/250VAC
Material: High-durability plastic housing with electrical contacts
Mounting: Direct replacement switch with snap-in or screw mount
Operating Conditions: Designed for standard dishwasher use
Compliance: Genuine LG OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, flathead screwdriver, needle-nose pliers
⚠️ Safety First: Always disconnect the dishwasher from power before starting repairs.
Steps:
Disconnect power supply to dishwasher.
Access control panel or door latch assembly (depending on model).
Locate and remove the faulty micro switch.
Install the new 3W40025L switch and reconnect wiring.
Reassemble the control panel or door latch assembly.
Restore power and test dishwasher operation.
⏱️ Time Required: 15–20 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Get your dishwasher running properly again — Add to Cart Now for a genuine, factory-approved fix!
WE04X29793 Dryer Genuine OEM High Limit Thermostat
Fits Specific GE Dryer Models.
Replaces Part Numbers: WE04X29793, OEM20955920, AP6985305, PS12749247.
Description: This High Limit Thermostat is a Genuine OEM replacement part for specific GE electric dryer models. Located internally near heating components .
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO 7733P410-60 Surface Burner Knob (Replaces WP7733P410-60)
Product Overview
The XPARTCO 7733P410-60 Surface Burner Knob (Replaces WP7733P410-60) is designed to control the heat level of your range’s surface burners. This durable replacement knob restores precise control and a clean, finished look to your cooktop.
Quick Answer
If your stove knob is cracked, loose, missing, or difficult to turn, the 7733P410-60 burner knob is likely worn. Replacing it restores proper control of burner heat settings.
Replaces Part Numbers
Replaces OEM part number: WP7733P410-60, 7733P410-60, 74007733, WP7733P410-60VP, EAP11744702, AWP48511, PD00004326, AP6011505, PS11744702.
Compatibility
This surface burner knob is compatible with select Whirlpool, Maytag, Amana, and other compatible ranges.
Whirlpool Ranges
Maytag Ranges
Amana Ranges
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Broken or cracked knob
Knob slipping or not turning properly
Missing control knob
Difficulty adjusting burner heat
Key Features
Restores precise burner control
Easy push-on installation
High-quality aftermarket replacement
Durable construction for daily use
Product Specifications
Part Number: 7733P410-60
Part Type: Surface Burner Knob
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Range Cooktop Control
Troubleshooting Guide
Knob spins freely → Worn internal insert
Cannot adjust flame → Damaged knob
Knob falls off → Cracked or loose fit
When Should You Replace This Knob?
Replace this knob if it is cracked, loose, missing, or no longer controls burner settings accurately.
Installation Notes
⚠️ Ensure the appliance is off. Pull the old knob straight off the control shaft and push the new knob firmly into place.
Related Parts
Surface Burner Valve
Igniter Switch
Control Panel Overlay
Frequently Asked Questions
Will this knob fit my range?This knob fits many Whirlpool and compatible models. Always verify your model number.
Is installation difficult?No, most knobs are push-on and can be replaced without tools.
What are signs of a bad knob?Cracks, slipping, or inability to control heat settings.
Is this OEM or aftermarket?This is a high-quality aftermarket replacement part.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
XP382 Dryer Gas Valve Solenoid for DC62-00201A
The XP382 is an aftermarket replacement gas valve solenoid coil kit for Samsung gas dryers, and also fits select Whirlpool, Sears, and Kenmore models using a compatible two-coil gas valve. This is a newer-style coil kit that fits most dryers using a two-coil gas valve design, and it works alongside the gas valve assembly (DC62-00201A) to regulate the precise amount of gas needed to properly combust and generate heat for drying clothes.
Over time, these solenoid coils can weaken or fail electrically, preventing the gas valve from opening correctly even when the igniter is functioning normally. Symptoms of a failing gas valve solenoid include the burner not igniting even though the igniter glows, weak or inconsistent heat, or the dryer running a full cycle with little to no heat.
Quick Answer
The XP382 Dryer Gas Valve Solenoid fixes Samsung, Whirlpool, Sears, and Kenmore gas dryers using a compatible two-coil gas valve, where the burner isn't igniting despite the igniter glowing, heat is weak or inconsistent, or the dryer runs without heating. Fits Samsung DC62-00201A gas valve assembly. This is a gas ignition component — always shut off the gas supply and let the dryer cool before working on it, and if you smell gas at any point, stop and call a professional.
Common Problems This Part Fixes
Burner not igniting even though the igniter glows normally
Weak or inconsistent heat
Dryer running a full cycle with little to no heat
Gas valve failing to open when the igniter calls for gas
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer gas valve solenoid directly replaces the following OEM and cross-reference part numbers:
Fits Samsung Dryer Gas Valve Coils Kit for DC62-00201A
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This gas valve solenoid is compatible with select Samsung gas dryers using the DC62-00201A gas valve assembly, and also fits select Whirlpool, Sears, and Kenmore gas dryers using a compatible two-coil gas valve design.
Note: This is a coil kit that works with the gas valve assembly, not a replacement for the full valve body itself. If your gas valve assembly needs full replacement rather than just the coils, you'll need the complete DC62-00201A assembly. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which part your dryer needs.
Key Features
Aftermarket replacement gas valve solenoid coil kit
Resolves "burner won't ignite," "weak heat," and "no heat" symptoms tied to gas valve solenoid failure
Newer-style coil kit fitting most two-coil gas valve designs
Direct drop-in replacement matching the original mounting and connection
Fits Samsung Dryer Gas Valve Coils Kit for DC62-00201A
Compatible with Samsung, Whirlpool, Sears, and Kenmore gas dryers using a compatible two-coil valve
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XP382
OEM Part Number
DC62-00201A (compatible coil kit)
Part Type
Dryer Gas Valve Solenoid Coil Kit
Condition
Aftermarket Replacement
Coil Configuration
Two-coil
Application
Gas Dryers
Repair Difficulty
Moderate — gas appliance component
Quantity
1 solenoid coil kit
Compatible Brands
Samsung, Whirlpool, Sears, Kenmore
Installation Notes
⚠️ Shut Off Gas Supply And Unplug Dryer Before Starting This is a gas ignition component. Turn off the gas supply to the dryer at the shutoff valve and disconnect power at the outlet before beginning. Allow the dryer to cool fully if it has recently been in use. Wear work gloves. If you smell gas at any point during this repair, stop immediately, do not operate any switches, leave the area, and contact your gas utility or a qualified technician from a safe location. Access the gas valve assembly, typically located near the burner housing — consult your dryer's service documentation for the exact access point on your model. Locate the old solenoid coils and disconnect their wiring. Remove the mounting screws or clips securing the old coils to the valve body and pull them free. Install the new XP382 coils in the same position, reconnect the wiring fully, and secure the mounting hardware. Restore the gas supply and power, then test the burner to confirm it ignites reliably with consistent heat. If you are not fully comfortable working with gas line connections, have a qualified technician perform this repair instead.
Frequently Asked Questions
My igniter glows but the burner doesn't light. Is this the part I need?
Yes, this is a classic sign of a failed gas valve solenoid. The igniter can glow and reach ignition temperature normally, but if the solenoid coils that open the gas valve have failed electrically, no gas reaches the burner to actually ignite, leaving the dryer to run without heat.
Do I need the whole gas valve assembly, or just this coil kit?
If the valve body itself is intact and only the solenoid coils have failed, this coil kit is the more targeted and typically less expensive repair. If the valve body is cracked, stuck, or otherwise physically damaged, you'll need the complete DC62-00201A gas valve assembly instead.
Is it safe to replace this myself?
This repair involves working around your dryer's gas supply line, so take care to fully shut off the gas and let the appliance cool before starting. If you're not comfortable working around gas appliances, or if you smell gas at any point, stop and contact a qualified technician or your gas utility rather than continuing the repair yourself.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the coil configuration and connection type needed to work with the DC62-00201A gas valve assembly used in compatible Samsung, Whirlpool, Sears, and Kenmore gas dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WPW10415450 Genuine OEM Whirlpool Range Burner Knob
The WPW10415450 is a genuine Whirlpool OEM surface burner control knob for gas ranges and cooktops. This is the knob you turn to light and adjust a surface burner — it fits onto a D-shaped valve stem behind the control panel, and its position controls how far the gas valve opens, from off through lite, hi, medium, and low. Markings printed around the perimeter line up with an indicator arrow on the control panel so you can see exactly what setting you've selected.
Finished in stainless steel/chrome, approximately 2" in diameter. Over years of use, the knob's internal D-shaped socket can wear out and stop gripping the valve stem securely, or the knob itself can crack, melt slightly from heat exposure, or simply wear down from repeated turning. A worn or damaged knob typically shows up as difficulty adjusting the burner heat, a knob that feels loose or wobbly, a knob that spins without turning the valve, or one that no longer seats securely onto the shaft. It directly replaces W10415450, AP6021125, 2118719, PS11754446, EAP11754446, W10294797, W10325899, and PD00007159.
Quick Answer
The WPW10415450 Genuine OEM Whirlpool Range Burner Knob fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas ranges with a burner knob that's cracked, loose, wobbly, spins without adjusting the flame, or won't seat onto the valve stem. Stainless steel/chrome finish, 2" diameter, fits a D-shaped shaft. Replaces W10415450, AP6021125, 2118719, PS11754446, EAP11754446, W10294797, W10325899, PD00007159. Visually similar knobs W10284885 and W10316664 are NOT compatible with this part despite looking alike.
Common Problems This Part Fixes
Difficulty turning or adjusting the burner heat setting
Knob feels loose or wobbly on the shaft
Knob spins freely without turning the gas valve
Knob won't seat securely onto the valve stem
Visible cracks, melting, or heat damage on the knob
Knob missing entirely, making burner adjustment impossible
Setting markings no longer line up correctly with the indicator arrow
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This range burner control knob directly replaces the following OEM and cross-reference part numbers:
WPW10415450, W10415450, AP6021125, 2118719, PS11754446, EAP11754446, W10294797, W10325899, AWP50229, PD00007159
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This burner knob is compatible with select Whirlpool gas ranges and cooktops, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea appliances built on the Whirlpool platform, including model numbers such as:
GG388LXB01, GG388LXB02, GG388LXB03, GG388LXQ01, GG388LXQ02, GG388LXS04, GG388LXS05
GG390LXB01, GG390LXB03
GCG388LXQ03
GGG388LXB04, GGG388LXO04, GGG390LXQ01, GGG390LXS01, GGG390LXS02
Note — visually similar knobs are NOT compatible: Whirlpool uses several burner knobs that look nearly identical to this one but are not interchangeable, including W10284885 and W10316664. Same appearance does not mean same fit — these knobs use different internal shaft sockets and will not seat correctly on this valve stem. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which knob fits your range.
Key Features
Genuine Whirlpool OEM part — factory-specified D-shaft socket and setting markings
Fits a D-shaped burner valve stem for a secure, non-slip grip
Resolves "loose or wobbly knob," "spins without adjusting flame," "won't seat on the shaft," and "cracked or damaged knob" symptoms
Stainless steel/chrome finish, approximately 2" diameter
Clear off/lite/hi/med/low markings aligned to the control panel indicator arrow
No tools required — simple pull-off, push-on installation
Replaces W10415450, AP6021125, 2118719, PS11754446, EAP11754446, W10294797, W10325899, and PD00007159
Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea gas ranges
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WPW10415450
Part Type
Range Surface Burner Control Knob
Condition
Genuine OEM
Brand
Whirlpool
Application
Gas Ranges and Cooktops
Finish
Chrome
Diameter
Approx. 2 in.
Shaft Type
D-shaped valve stem
Settings
Off, Lite, Hi, Med, Low
Repair Difficulty
Very Easy — no tools required
Quantity
1 knob
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, Ikea
Installation Notes
⚠️ Unplug Range Or Shut Off Breaker Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Pull the old knob straight off the valve stem — on most models this requires no tools, just firm, even pressure in the direction of the indicator arrow. Confirm the new WPW10415450 knob by checking that the part number matches before installing. Align the top of the new knob with the control panel's indicator arrow, then press the knob onto the D-shaped shaft until you feel and hear it click securely into place. Restore power and test that the knob turns smoothly through its full range, with the markings lining up correctly against the indicator arrow at each setting. Tools needed: none.
Frequently Asked Questions
My knob spins but doesn't seem to change the burner flame. Is this the right part?
Yes, this is a common symptom of a worn knob. Over time, the internal D-shaped socket that grips the valve stem can wear out, letting the knob spin independently of the shaft instead of turning it. Replacing the knob restores that positive connection so turning it actually opens and closes the gas valve as expected.
I found a knob online that looks identical but has a different part number. Will it work?
Not necessarily, and this is worth being careful about. Whirlpool uses several burner knobs, including W10284885 and W10316664, that closely resemble this one visually but use different internal shaft sockets and are not compatible with this valve stem. Always match the exact part number rather than relying on appearance, and verify against your model number if you're unsure.
Do I need any tools to replace this knob?
No. This is a simple pull-off, push-on repair — remove the old knob by pulling it straight off the shaft, then press the new one on until it clicks into place. No screws, no disassembly of the control panel required.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original D-shaft socket, finish, and setting markings of the burner knob originally installed on your range.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
(4 Pack) 74009592CM Burner Control Knob
Black plastic burner knob
Fits Specific Maytag, Jenn Air, Whirlpool ranges
Replaces Part Numbers: WP74009592, 74009592, 1032643, 71003477, AP6011140, PS11744334.
Description: This Top Burner Control Knob is a replacement part for specific Whirlpool ranges and cooktop models. This part allows for precise control over the heat level of the stove's burners, enabling users to adjust the flame size for various cooking needs. Constructed from durable materials, the knob is designed to withstand the rigors of daily use, providing a reliable interface for setting and maintaining the desired cooking temperature.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO 165256 Dishwasher Float Switch Replaces 00165256
Product Overview
The XPARTCO 165256 Dishwasher Float Switch Replaces 00165256 is designed to monitor water levels inside the dishwasher and prevent overfilling. This float switch detects rising water levels and signals the control system to stop filling, protecting your appliance from leaks and water damage.
Quick Answer
If your dishwasher is overfilling, not filling correctly, or leaking due to excess water, the 165256 float switch may be faulty. Replacing it restores proper water level control and prevents overflow issues.
Replaces Part Numbers
Replaces OEM part number: 00165256, 165256, 935359, EAP8697040, ABS10088, PD00035415, AH3439096, EA3439096, PS3439096, AP2802373, PS8697040.
Compatibility
This dishwasher float switch is compatible with select Bosch, Thermador, and other compatible dishwashers.
Bosch Dishwashers
Thermador Dishwashers
Compatible European-style Dishwashers
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Dishwasher overfilling
Water leaking due to excess fill
Incorrect water level detection
Dishwasher not filling properly
Key Features
Monitors dishwasher water level
Prevents overfilling and leaks
High-quality aftermarket replacement
Reliable and durable construction
Product Specifications
Part Number: 165256
Part Type: Dishwasher Float Switch
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Dishwasher Water Level Control
Troubleshooting Guide
Dishwasher overfills → Faulty float switch
Water keeps filling → Float switch stuck or failed
Dishwasher won’t fill → Switch not detecting properly
When Should You Replace This Float Switch?
Replace this float switch if your dishwasher is overfilling, leaking, or not detecting correct water levels.
Installation Notes
⚠️ Disconnect power and water supply before installation. Access the float switch inside the tub area and install securely according to your dishwasher model.
Related Parts
Water Inlet Valve
Dishwasher Float Assembly
Control Board
Frequently Asked Questions
Will this float switch fit my dishwasher?This part fits many Bosch and compatible dishwashers. Always verify your model number.
What does a float switch do?It monitors water levels and prevents overfilling inside the dishwasher.
What are signs of a bad float switch?Overfilling, leaking, or improper water level control.
Is this OEM or aftermarket?This is a high-quality aftermarket replacement part.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
W10404050 Genuine OEM Washer Lid Switch Assembly
The W10404050 is a Genuine OEM replacement lid switch and latch assembly compatible with select Whirlpool, Maytag, Kenmore, Amana, KitchenAid, Roper, Admiral, Crosley, Inglis, Magic Chef, and Norge top-load washers. The lid switch is a critical safety component that detects when the washer lid is opened or closed. It sends a signal to the control board to allow the washer to fill, agitate, and spin when the lid is closed — and to immediately stop the spin cycle when the lid is opened, preventing contact with a moving drum.
This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It features a 4-wire plug connection and includes two bezels (one white and one gray) to match different model color schemes. It directly replaces W10238287, W10744659, W10404050VP, AP5263307, and several additional cross-reference numbers. The companion lid strike (W10240513) is sold separately — inspect the strike on your lid for wear or damage and replace if needed. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The W10404050 Genuine OEM Washer Lid Switch Assembly fixes top-load washers that won't start, won't spin, have a blinking lid lock light, or continue spinning with the lid open. 4-wire plug connection. Includes white and gray bezels. Replaces W10238287, W10744659, AP5263307, and more. Compatible with Whirlpool, Maytag, Kenmore, Amana, KitchenAid, Roper, Admiral, Crosley, Inglis, Magic Chef, and Norge washers. Lid strike W10240513 sold separately.
Common Problems This Part Fixes
Washer will not start — lid lock light blinks without locking
Washer fills but will not agitate or spin
Washer lid lock light continuously blinks and clicks without engaging
Washer continues to spin with the lid open — safety mechanism not working
Lid appears locked but washer will not proceed past sensing or fill cycle
Washer stops mid-cycle and will not restart without opening and re-closing the lid
Lid lock assembly visibly broken or latch no longer springs back after pressing
Replaces Part Numbers
This lid switch assembly directly replaces the following OEM and cross-reference part numbers:
W10404050, 1938607, W10238287, W10404050VP, W10744659, EAP3497627, AWP41256, PD00003596, AH3497627, AP5263307, EA3497627, PS3497627.
Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This lid switch assembly is compatible with select top-load washers from the following brands:
Whirlpool top-load washers — Cabrio and WTW series (electronic top-load models)
Maytag top-load washers — Centennial, Bravos X, and MVWC/MVWX series
Kenmore / Sears top-load washers — 110 series and select others (Whirlpool-built)
Amana top-load washers — NTW and ATW series
KitchenAid top-load washers
Roper top-load washers
Admiral top-load washers — ATW series
Crosley top-load washers
Inglis top-load washers
Magic Chef top-load washers
Norge top-load washers
Note: The W10404050 is for electronic top-load washers with a 4-wire lid lock (Cabrio, Centennial, Bravos, and similar platforms). Older mechanical top-load washers use a different lid switch style. Verify your model number before ordering.
Key Features
Genuine OEM part manufactured by Whirlpool to factory specifications — guaranteed fit and performance
Critical safety component — stops the spin cycle when the lid is opened to prevent contact with a moving drum
Signals the control board to allow filling, agitating, and spinning when the lid is properly closed and locked
4-wire plug connection — direct plug-in replacement on compatible models
Includes two bezels (white and gray) to match different model color schemes
Replaces W10238287, W10744659, W10404050VP, AP5263307, and more
Compatible with Whirlpool Cabrio, Maytag Centennial, Maytag Bravos X, Kenmore 110 series, and many more
Lid strike W10240513 sold separately — inspect and replace if worn
Product Specifications
Part Number
W10404050
Part Type
Washer Lid Switch and Latch Assembly
Condition
Genuine OEM
Application
Electronic Top-Load Washers (4-wire lid lock)
Connector
4-wire plug
Color
White (includes both white and gray bezels)
Includes
Lid switch assembly, white bezel, gray bezel
Companion Part
W10240513 Lid Strike (sold separately)
Compatible Brands
Whirlpool, Maytag, Kenmore, Amana, KitchenAid, Roper, Admiral, Crosley, Inglis, Magic Chef, Norge
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power before beginning any repair. The lid switch assembly is mounted under the washer's top panel near the lid opening. To access it, insert a putty knife about 2 inches from each front corner of the top panel to release the spring clips and lift the top panel. Disconnect the 4-wire harness from the old lid switch assembly. Remove the mounting screws securing the assembly and lift it out. Install the new W10404050 assembly, secure with the mounting screws, and reconnect the 4-wire harness. Choose the appropriate bezel (white or gray) for your model and snap it into place. Lower the top panel until the clips engage. Restore power and run a test cycle to confirm the lid locks, the washer starts, and the spin cycle stops when the lid is opened. Tip: While the top panel is raised, inspect the lid strike (W10240513) on the lid for cracks or wear — if worn, replace it at the same time. Tools needed: Phillips screwdriver, putty knife or flat pry tool.
Frequently Asked Questions
What does the washer lid switch do?
The lid switch assembly serves two functions. First, it is a safety device — when the lid is opened during the spin cycle, the switch immediately cuts power to the spin motor to prevent contact with the moving drum. Second, it signals the control board that the lid is securely closed and locked, allowing the washer to proceed through the fill, agitate, and spin cycles. If the switch fails, the washer either won't start at all, or will fail to proceed past a specific cycle stage because the board cannot confirm the lid is closed.
My lid lock light is blinking — does that mean the lid switch needs to be replaced?
A blinking lid lock light is one of the most common symptoms of a failed W10404050 lid switch assembly. It typically means the lid lock mechanism is attempting to engage but failing — either because the switch is internally faulty or because the lid strike (W10240513) on the lid is broken and not triggering the switch properly. Inspect the lid strike first — if it is cracked or missing, replace it. If the strike looks intact and the lid lock still blinks without engaging, replace the W10404050 switch assembly.
Should I also replace the lid strike (W10240513) at the same time?
It depends on the condition of the strike. Open the lid and inspect the two plastic prongs on the underside of the lid that engage the W10404050 latch — this is the W10240513 lid strike. If the prongs are cracked, broken, or noticeably worn down, replace the strike at the same time as the switch assembly. Since the top panel is already lifted for the switch replacement, it is a good opportunity to inspect and replace the strike if needed, using only a Phillips screwdriver.
What washers is the W10404050 compatible with?
The W10404050 is used on Whirlpool Cabrio and WTW series electronic top-load washers, Maytag Centennial and Bravos X top-load washers, and Kenmore 110 series top-load washers, among others. It is specifically for electronic top-load models with a 4-wire lid lock — not for older mechanical top-load washers that use a simpler 2- or 3-wire lid switch. Verify your model number before ordering.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same lid switch and latch assembly installed in compatible washers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WH12X955 Washer Lid Switch
The XPARTCO WH12X955 is an aftermarket replacement lid switch assembly compatible with GE, Hotpoint, RCA, and Kenmore GE-built washer/dryer combo units (including GE spacemaker and stacked laundry models). The lid switch is a safety component mounted inside the washer lid — it detects whether the lid is open or closed and signals the control that it's safe for the machine to start, agitate, and spin. When the lid closes, the switch activates and the washer can run through its full cycle. If the lid switch fails, the washer typically won't spin or drain, may not start or agitate at all, and clothes are left sitting in water.
This is a complete lid switch assembly with an integrated wiring harness and ground wire. Dimensions: 1-1/4" H x 2-1/4" W x 16" D (the 16" depth is the wire harness that routes from the lid down into the washer cabinet). It directly replaces WH12X955, WH12X0955, AP2045786, 278666, AH270219, EA270219, PS270219, and OEM6137363. Installation involves accessing the lid itself — the switch mounts inside the lid with two screws plus a separate ground wire screw. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO WH12X955 Washer Lid Switch fixes GE, Hotpoint, RCA, and Kenmore GE-built washer/dryer combo units where the washer won't spin, won't drain, won't start, or won't agitate — leaving clothes sitting in water. Complete lid switch assembly with wiring harness and ground wire. Dimensions 1-1/4"H x 2-1/4"W x 16"D. Replaces WH12X0955, AP2045786, 278666, AH270219, EA270219, PS270219, OEM6137363. Classic symptom: washer won't spin or drain.
Common Problems This Part Fixes
Washer won't spin — the classic lid switch failure symptom
Washer won't drain — clothes left sitting in water at the end of the cycle
Washer won't start at all — control not detecting a closed lid
Washer won't agitate — the machine won't advance past the fill phase
Machine doesn't recognize the lid is closed even when it is
Lid switch body cracked from the lid being closed hard over time
Internal switch contacts worn out — no longer signaling that the lid is closed
Intermittent operation — washer sometimes spins, sometimes doesn't, depending on lid position
Broken or frayed lid switch wiring harness
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer lid switch directly replaces the following OEM and cross-reference part numbers:
WH12X955, 278666, AGE25981, AH270219, EA270219, PD00030733, EAP270219, PS270219, AP2045786, WH12X0955, EXPWH12X955
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This lid switch assembly is compatible with select washer/dryer combo units (spacemaker and stacked laundry models) from the following brands:
GE washer/dryer combo units — spacemaker and stacked laundry center models
GE Spacemaker washers — select models
Hotpoint washer/dryer combo units (select GE-built models)
RCA washer/dryer combo units (select GE-built models)
Kenmore / Sears washer/dryer combo units (select GE-built models)
Note: This lid switch is specific to GE washer/dryer combo and spacemaker units — it is NOT the same switch used on standalone GE top-load washers, which use different lid switch part numbers. Always search by your appliance model number to confirm this part fits before ordering. Contact our support team with your model number if you're unsure.
Key Features
Lid switch safety assembly — detects whether the lid is open or closed and allows the washer to start, agitate, spin, and drain when the lid is shut
Resolves the classic "won't spin" and "won't drain" symptoms of lid switch failure
Complete assembly with integrated wiring harness and ground wire
Dimensions: 1-1/4" H x 2-1/4" W x 16" D (the 16" depth is the wiring harness)
Mounts inside the washer lid with two screws plus a separate ground wire screw
Snap-in switch design with connector — no wiring modifications required
Replaces WH12X0955, AP2045786, 278666, AH270219, EA270219, PS270219, and OEM6137363
Compatible with GE, Hotpoint, RCA, and Kenmore GE-built washer/dryer combo and spacemaker units
Aftermarket replacement built to OEM-equivalent quality standards
DIY-friendly repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
WH12X955
Part Type
Washer Lid Switch Assembly
Condition
Aftermarket Replacement
Application
Washer/Dryer Combo & Spacemaker Units (GE platform)
Dimensions
1-1/4" H x 2-1/4" W x 16" D
Includes
Lid switch, wiring harness, ground wire
Function
Prevents washer spin/agitation when lid is open
Location
Inside the washer lid
Mounting
Two screws + separate ground wire screw
Compatible Brands
GE, Hotpoint, RCA, Kenmore (GE-built)
Installation Notes
⚠️ Unplug Washer Before Starting — Wear Work Gloves — The Lid Comes Off Disconnect power at the outlet or breaker before beginning. Wear work gloves to protect your hands from sharp sheet metal edges. This repair requires removing the washer lid to access the switch. Open the lid, then push it toward the back of the machine to release the plastic clips at the front that hold the lid up. Slowly lift the lid at the front — you'll see the lid switch is the only thing still connecting the lid to the washer body. Confirm the power is off, then unclip the electrical connector that joins the lid switch harness to the washer's wiring (it's typically a molex-style connector). With the connector released, you can carry the lid to a workbench or flat surface to work on it comfortably. On the underside/inside of the lid, remove the two screws on the right-hand side that hold the switch in place, then remove the screw that secures the ground wire to the inside of the lid. Lift out the old switch. The new WH12X955 switch snaps into place — seat it, reinstall the two mounting screws, and reattach the ground wire with its screw. Route the new harness cable through the same path as the old one; you can gently lift the retaining clips with a flathead screwdriver to slide the new cable through. Reconnect the electrical connector, set the lid back into position, and press it down until the front plastic clips engage. Restore power and test by closing the lid and running a cycle — confirm the washer agitates, drains, and spins. Tools needed: Phillips screwdriver, nut driver, flathead screwdriver, work gloves. (Tip: if you drop the ground wire nut inside the cabinet, a magnet on a stick makes retrieval easy.)
Frequently Asked Questions
My washer won't spin or drain — is the lid switch the cause?
Yes — this is the single most common and telling symptom of a failed lid switch. The lid switch is a safety interlock that prevents the drum from spinning while the lid is open. When the switch fails (cracked body, worn internal contacts, or broken wiring), the control never receives the "lid closed" signal, so it blocks the spin and drain phases as a safety measure — leaving your clothes sitting in water. On many GE washer/dryer combos, a failed lid switch will also prevent the machine from starting or agitating at all. If your washer fills but goes no further, or completes the wash but leaves clothes soaked, the lid switch is the prime suspect. You can confirm by testing the switch for continuity with a multimeter when the lever is depressed.
Why is this switch 16" long?
The 16" dimension is the length of the wiring harness, not the switch body itself. The switch mounts inside the washer lid, and its harness has to route from the lid, through the hinge area, down into the washer cabinet to reach the main wiring connector. That's why the assembly comes with a long attached cable — and it's also why this repair involves removing the lid to access everything. The switch body itself is compact at roughly 1-1/4" H x 2-1/4" W.
Does this fit my standalone GE top-load washer?
Probably not. The WH12X955 is specifically used on GE washer/dryer combo units and spacemaker/stacked laundry models. Standalone GE top-load washers use different lid switch part numbers. Because the lid switch design and mounting vary significantly across GE's washer lineup, always search by your appliance model number to confirm the correct part before ordering. If your unit is a standalone top-loader, contact our support team with your model number and we'll identify the right lid switch for it.
Do I really have to take the lid off to install this?
On most compatible models, yes — the lid switch mounts inside the lid itself, so you'll need to release the lid from the washer body to reach the two mounting screws and the ground wire screw. The good news is that the lid comes off fairly easily: push it toward the back to release the front plastic clips, then lift it slowly, unclip the electrical connector, and carry the lid to a comfortable work surface. Working on the lid off the machine is far easier than trying to reach into a cramped laundry closet. Just be sure power is disconnected before unclipping the connector.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the dimensions (1-1/4"H x 2-1/4"W x 16"D), harness and ground wire configuration, connector, mounting, and lid-detection function of the original WH12X955 lid switch used in compatible GE, Hotpoint, RCA, and Kenmore GE-built washer/dryer combo and spacemaker units.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
