XPARTCO 35001191 Dryer Thermistor – Replaces WP35001191 – Compatible with Whirlpool, Maytag & Kenmore Dryers
Product Description
Maintain accurate temperature control and efficient drying with the XPARTCO 35001191 Dryer Thermistor. This Dryer Thermistor is a replacement part for specific Whirlpool, Kenmore, Maytag dryer models, that is responsible for monitoring and controlling the temperature within the dryer drum. This sensor prevents overheating or under-heating, which can affect drying performance and fabric care. The thermistor communicates temperature readings to the dryer's control board, which then adjusts the heat accordingly to maintain the desired temperature settings.
Replaces Part Numbers
WP35001191, 35001191, 1185513, PD00003059, EAP11741828, AP6008688, PS11741828.
Compatibility
This replacement dryer thermistor fits select Whirlpool, Maytag, Kenmore, Amana, Crosley, and Estate electric dryers.
Example compatible models include (but are not limited to):Whirlpool WED4815EW1, Maytag MEDC215EW1, Kenmore 110.65132411.
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM temperature-sensing accuracy
🌡️ Precise Heat Regulation – Helps control dryer temperature efficiently
🔧 Reliable Sensor Performance – Sends accurate feedback to control board
💰 Cost-Effective Repair – Quality alternative to OEM thermistors
🛡️ Fixes Common Issues – Resolves overheating, no heat, long dry times, or error codes
📐 Product Specification
Part Number: 35001191
Component Type: Dryer Thermistor / Temperature Sensor
Application: Exhaust temperature monitoring
Material: Heat-resistant sensor body with wire leads
Mounting: Screw-mounted on blower housing
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock.
Steps:
Disconnect dryer power and remove the rear panel.
Locate the thermistor on the blower housing.
Disconnect the wiring harness and remove mounting screws.
Install the new XPARTCO 35001191 thermistor.
Reconnect wiring, reinstall panel, and restore power.
Run a test cycle to confirm proper temperature regulation.
⏱️ Time Required: 10–15 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore accurate dryer temperature control — Add to Cart Now for a dependable, budget-friendly repair!
XPFH065A Microwave 5kV 0.65A High Voltage Fuse - Compatible with LG, Samsung, Whirlpool, Sharp, Panasonic, Bosch and many other Microwaves
Product Description
Protect your microwave with the replacement XPFH065A Microwave 5kV 0.65A High Voltage Fuse. This replacement fuse safeguards the electrical system in LG, Samsung, Whirlpool, Sharp, Panasonic, Bosch, Siemens, and many other microwaves by breaking the circuit during power surges or faults (0.65A, 5.0kV). Featuring a fast-blow glass fuse (6x40mm), it resolves issues like no power, blown fuses, or intermittent failures.
Note: Includes one fuse. Disconnect power before installation. Handle glass fuse carefully. Excess cable may need to be tied back.
Replaces part numbers: XPFH065A, XPFH-065-5KV, XPFH065A, XPFH-065-5KV, F650mA L5KV, EAF36358301, AP5249671, AH3620511, EA3620511, PS3620511.
Compatibility:
Compatible with models including but not limited to:
LG, Samsung, Whirlpool, Sharp, Panasonic, Bosch, Siemens, Daewoo, Fagor, Brandt, Candy, Hitachi, De Dietrich, Proline, Scholtes, Midea, Galanz: Select models requiring 0.65A, 5.0kV fuse
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG, Samsung, Whirlpool, Sharp, Panasonic, Bosch, Siemens, Daewoo, Fagor, Brandt, Candy, Hitachi, De Dietrich, Proline, Scholtes, Midea, and Galanz microwaves.
🔥 Specifications: replacement high voltage fuse with holder, 0.65A, 5.0kV, fast-blow, glass fuse.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires needle-nose pliers, Phillips screwdriver, work gloves; typically installed in 15–25 minutes.
🛡️ Reliable Fixes: Addresses microwave not powering on, blown fuses, or intermittent power issues.
Product Specification
Part Number: XPFH065A
Fuse Type: Fast-blow, high voltage
Current Rating: 0.65A (650mA)
Voltage Rating: 5.0kV (5000V)
Fuse Material: Glass tube
Fuse Dimensions: 6mm diameter x 40mm length (1/4" x 1-5/8")
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the microwave from the power source before installation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Get your microwave running today!
Add to cart now for a budget-friendly fix!
(2 Pack) 20A Ceramic Fuse 6.35 x 32 mm, 20A 250V - Compatible with GE, Whirlpool, Kenmore, Maytag, Frigidaire, LG, Samsung and Other Appliances
Product Description
Protect your appliances with the replacement 20A Slow-Blow Ceramic Fuse 6.35 x 32 mm, 20A 250V. This high-quality time-delay (slow-blow) ceramic cartridge fuse is designed for GE, Whirlpool, Kenmore, and other appliances like microwaves, washers, dryers, and spa control systems. With a ceramic body for durability and heat resistance, this fuse (6.35 x 32 mm, 20A, 250V AC) safeguards circuits from over current and short circuits while tolerating brief surges. It addresses issues like appliance failure, power loss, or blown fuses.
Note: Includes one ceramic fuse. Disconnect power before installation. Verify fuse size and rating match your appliance’s requirements.
Replaces part numbers: EXP20A, MDA-20, 0326020.HXP, 0326020.MXDP, BK1-MDP-20-R, BK-MDP-V-20-R, GSA20, 8020.0605, 8020.0605.G, WB27X10388, AP3094537, AH334641, EA334641, EAP334641, PS334641, WP4375321, W11305892, W11305905, AP6009296, PS11742452, 3601-001198, AP4046006, PS4131369, 5F1CD2031S, AP4565040, 1206681, 4922155, WB27X11151, AP4980434, PS3486702, WB27X11151, AP4980434, PS3486702, WB2X3910, PS242167, AP2010811, WB2X3910, WB27X995, WB27X945, B27X10388, PS239525, AP2631556, WP8183507, 8183507, PS11745084, AP6011884, M0805101, AP6014669, PS11747931, WPM0805101, 5304423383, PS472662, AP2151673, EA472662, WB27X10928, AP3994062, WB27X10388, AH1481237, EA1481237, PS1481237, W11707984, W10138793, AP7225218, PS17629444, 3B74133Q, AP4440371, PS3522743, 5F1CD0202S, 5F1CD2031S, 3B74133K. AH3522741, EA3522741, AP4438152, PS3522741.
Compatibility:
Compatible with appliances including but not limited to:
GE Microwaves: JE1860SH04, JVM1540SM5SS, JVM1440WH04
Whirlpool Microwaves: MH1150XMQ0, MH2175XSB0
Kenmore Microwaves: 721.62649200, 665.68612800
Whirlpool Washers: WTW5300SQ0, LSQ9544KQ0
Whirlpool Dryers: WED5300SQ0
Balboa Spa Control Systems: 30123
Other Brands: KitchenAid, Maytag, Amana, Hotpoint, and other appliances requiring 6.35 x 32 mm, 20A 250V slow-blow fuses
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select GE, Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Hotpoint, LG, Samsung and other appliances requiring 6.35 x 32 mm, 20A 250V fuses.
🔥 Specifications: replacement slow-blow ceramic fuse, 6.35 x 32 mm (1/4" x 1-1/4"), 20A, 250V AC, ceramic body, time-delay, 3.35–3.5 mOhms resistance, cylindrical, holder/clip mount.
💰 Cost-Effective Alternative: replacement fuse offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires insulated gloves, needle-nose pliers; typically installed in 5–15 minutes.
🛡️ Reliable Fixes: Resolves appliance failure, power loss, or blown fuse issues in microwaves, washers, dryers, and spa systems.
Installation Notes:
Safety First: Disconnect the appliance from the power source before installation.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your appliances running safely and efficiently today!
Add to cart now for a budget-friendly fix!
XPARTCO DE60-20066A Microwave Mounting Flat Bolt
The XPARTCO DE60-20066A is an aftermarket replacement mounting flat bolt for over-the-range microwaves, including Samsung and Maytag microwave and hood combinations. The flat bolt is the long mounting bolt that holds the microwave in place. If the original is stripped, damaged, or missing, the microwave may no longer stay securely mounted.
This bolt also replaces the GE WB01X10180 flat cab mounting bolt. Because it holds a heavy appliance in place, match it to the bolt you are replacing and make sure the microwave is properly supported while you work.
Quick Answer
The XPARTCO DE60-20066A Mounting Flat Bolt replaces a stripped, damaged, or missing mounting bolt on an over-the-range microwave. Replaces Samsung DE60-20066A and GE WB01X10180. Classic symptom: the microwave is loose on its mounting bracket, or one of the mounting bolts is stripped or missing.
Common Problems This Part Fixes
Stripped mounting bolt
Missing mounting bolt after the microwave was removed or moved
Microwave loose or not held securely against its mounting bracket
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This mounting flat bolt directly replaces the following part numbers:
DE60-20066A, ASM36399, AP4219712, OEM12659145, EAP4226718, PD00024313, PS4226718, WB01X10180, WB1X10180, AP3205964, AGE20652, AH651196, EA651196, OEM9617901, 942461, PD00035893, PS651196
DE60-20066A is the Samsung number and WB01X10180 is the GE number. Confirm against your microwave's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This bolt is listed for Samsung and Maytag over-the-range microwaves under DE60-20066A, and for GE, Hotpoint, and Kenmore microwaves under WB01X10180, including these examples:
Samsung ME18H704SFS/AA-00, ME17R7021ES/AA-00, SMH1816S/XAA-00, SMH9151ST/XAA-00
Maytag MMV1153BAS, MMV5165BAS, UMV1152CAS
GE CVM2072SM1SS, DVM1850DM2WW, DVM1850DM4BB
Kenmore 36362702200, 36362709200
Note: The models above are a small sample of longer lists, not full lists. Compare your old bolt's length and head style to this bolt, and contact our support team with your model number to verify fit before ordering.
Key Features
Aftermarket replacement mounting flat bolt for over-the-range microwaves
Replaces Samsung DE60-20066A and GE WB01X10180
Approximately 4 inches long
Restores a secure mount when the original bolt is stripped or missing
Product Specifications
Part Number
XPDE60-20066A
OEM Part Number
DE60-20066A, WB01X10180
Part Type
Microwave Mounting Flat Bolt
Condition
Aftermarket Replacement
Length
Approx. 4 Inches
Application
Over-the-Range Microwaves (Samsung, Maytag, GE, Hotpoint, Kenmore)
Installation Notes
⚠️ Unplug Power And Support The Microwave Unplug the microwave before beginning, and wear work gloves. An over-the-range microwave is heavy, so have a helper support it, or support it from below, while you remove or loosen any fasteners. Follow your model's installation guide. In general, you remove the screws covering the mounting bolts, loosen the mounting bracket screws, replace the old bolt with the new one, then reattach the bracket and cover screws. Return the microwave to position, make sure it is firmly seated and secure, and reconnect power.
Frequently Asked Questions
My microwave is loose on its mount. Is this the part I need?
If a mounting bolt is stripped, damaged, or missing, replacing it is the usual fix. Check the bracket and the other fasteners too, and do not rely on a microwave that is not securely mounted.
Is DE60-20066A the same as WB01X10180?
DE60-20066A is the Samsung number and WB01X10180 is the GE number. This bolt is listed as a replacement for both. Compare it to your old bolt, or contact our support team with your model number, before ordering.
How many bolts come in this order?
Retailers list the equivalent GE bolt as sold individually, but do not state a pack count for every listing. Contact our support team if you need to confirm the quantity.
Will this fit my microwave?
It is listed for many over-the-range microwaves, but the model lists above are only samples. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 675813 Dishwasher Thermal Fuse
The XPARTCO 675813 is an aftermarket replacement bimetal thermal fuse (TCO — thermal cut-off) kit compatible with a wide range of Whirlpool-family dishwashers including Whirlpool, Kenmore, KitchenAid, Maytag, Estate, Crosley, Inglis, Roper, and Admiral. The thermal fuse is a one-time safety device located on or near the control board that monitors internal temperature. If the dishwasher overheats — due to a blocked vent, malfunctioning heating element, or other fault — the fuse permanently interrupts power to protect the dishwasher and prevent fire hazards.
Unlike a resettable thermostat, a blown thermal fuse must be replaced. Once it trips, the dishwasher will show no power and will not start. The kit includes one thermal cutoff fuse with a 2-wire harness (leads extending approximately 18 inches from the fuse), one zip tie, and installation instructions. The fuse body measures 1-1/16" L x 1" W x 7/16" H. The new wiring harness must always be used when replacing the fuse. Installs in 5–15 minutes with basic hand tools.
Quick Answer
The XPARTCO 675813 Dishwasher Thermal Fuse Kit fixes Whirlpool-family dishwashers that show no power, won't start, have a blank control panel, or stopped mid-cycle with no response. The thermal fuse permanently trips when the dishwasher overheats and must be replaced. Kit includes fuse with 2-wire harness, zip tie, and instructions. Fuse body 1-1/16" L x 1" W x 7/16" H. Always install using the new harness included. Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, and more.
Common Problems This Part Fixes
Dishwasher completely dead — no power, no lights, no response when buttons are pressed
Control panel blank with no indicator lights or display
Dishwasher stopped mid-cycle and will not restart
Dishwasher will not start despite the door being closed and latched
No sounds when attempting to start the dishwasher
Dishwasher behaves as if it has no power even though the outlet is live
Replaces Part Numbers
This dishwasher thermal fuse kit directly replaces the following OEM and cross-reference part numbers:
675813, 3375557, 3376359, 675813VP, 679723, AH382828, OEM9345567, AWP39651 PD00002439, EA382828, EAP382828, AP3115186, PS382828.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermal fuse kit is compatible with select dishwashers from the following brands:
Whirlpool dishwashers
Kenmore / Sears dishwashers (Whirlpool-built models)
KitchenAid dishwashers
Maytag dishwashers
Estate dishwashers
Crosley dishwashers
Inglis dishwashers
Roper dishwashers
Admiral dishwashers
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Bimetal thermal cut-off (TCO) fuse — permanently interrupts power if the dishwasher overheats, protecting against fire hazard
One-time safety device — once tripped, the fuse must be replaced (it does not reset)
Rated at 98°C — trips when internal temperature exceeds the safe operating limit
Fuse body dimensions: 1-1/16" L x 1" W x 7/16" H; leads extend approximately 18" from fuse
Kit includes thermal fuse with 2-wire harness, zip tie, and installation instructions
Always install using the new harness included — never reuse the old harness
Metal and plastic construction — reliable performance and heat resistance
Direct replacement for 675813, 675813VP, 3375557, and 3376359 — no modification required
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 5–15 minutes with basic hand tools
Product Specifications
Part Number
675813
Part Type
Dishwasher Thermal Fuse / Thermal Cut-Off (TCO) Kit
Condition
Aftermarket Replacement
Fuse Type
Bimetal thermal cut-off (one-time, non-resettable)
Trip Temperature
98°C (208°F)
Fuse Body Dimensions
1-1/16" L x 1" W x 7/16" H
Lead Length
Approximately 18 inches from fuse body
Color
White / Brown
Material
Metal / Plastic
Kit Includes
Thermal cutoff fuse with 2-wire harness, zip tie, instructions
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Estate, Crosley, Inglis, Roper, Admiral
Installation Notes
⚠️ Unplug or Switch Off Breaker Before Starting Unplug the dishwasher or turn off the circuit breaker before beginning any repair. The thermal fuse is located inside the dishwasher door panel near the control board. Open the dishwasher door and remove all screws from the inner door panel — a Torx bit is typically required on Whirlpool-family models. Carefully lift the inner door panel to expose the control board housing. Remove the black plastic cover over the control board to access the thermal fuse — it is typically on the right side of the board with one wire connected to each terminal. Test the old fuse with a multimeter for continuity (no continuity confirms the fuse has blown). Disconnect the old fuse and its harness. Connect the new 675813 fuse using the new 2-wire harness included in the kit — do not reuse the old harness. Secure the harness with the included zip tie. Reinstall the control board cover, inner door panel, and all screws. Restore power and run a test cycle. Note: If the fuse blows again after replacement, an underlying cause such as a blocked vent, failed heating element, or faulty control board should be diagnosed before replacing the fuse a second time. Tools needed: Torx screwdriver (T15 or T20), Phillips screwdriver, multimeter, work gloves.
Frequently Asked Questions
What does the dishwasher thermal fuse do?
The thermal fuse is a one-time safety device that monitors the internal temperature of the dishwasher. If the temperature rises above the safe operating limit — 98°C in this case — the fuse permanently interrupts the electrical circuit, cutting all power to the dishwasher. This protects both the appliance and your home from fire hazard caused by overheating. Unlike a resettable thermostat, a blown thermal fuse cannot be reset and must be physically replaced.
How do I know if my thermal fuse has blown?
The most obvious sign is a completely dead dishwasher — no lights, no sounds, and no response when you press any buttons, even though the outlet has power. You can confirm a blown fuse with a multimeter: disconnect the fuse from the harness and test for continuity across its two terminals. A working fuse will show continuity (near-zero resistance); a blown fuse will show no continuity (open circuit). If the fuse tests bad, replace it with the 675813 kit.
Why did my thermal fuse blow, and will it happen again?
Thermal fuses blow when the dishwasher overheats. Common causes include a blocked air vent, a malfunctioning or shorted heating element, a failed thermostat, or an electrical fault in the control board. If you simply replace the fuse without addressing the root cause, it may blow again. After replacing the fuse, run the dishwasher and monitor for any unusual heat, steam, or burning smell. If the fuse blows again, have the underlying fault diagnosed before ordering another replacement.
Why must I use the new harness and not the old one?
When a thermal fuse blows, the wiring harness connected to it may have been exposed to the same overheating event that tripped the fuse. The wires or connectors may have degraded or partially melted even if they appear intact. Using the old harness risks a poor connection or a recurring fault. Always install the new 2-wire harness included in the kit to ensure a reliable, safe connection.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from metal and plastic to match the dimensions, trip temperature, and performance of the original 675813 thermal fuse.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 6931EL3001E Dryer Thermostat – Compatible with LG and Kenmore Dryers
Product Description
Maintain proper dryer safety and temperature control with the 6931EL3001E Dryer Thermostat. This replacement part monitors and regulates dryer temperature to prevent overheating and ensure efficient drying cycles. A faulty thermostat may cause your dryer to stop heating, overheat, or shut off unexpectedly. Replacing it restores reliable performance and helps extend the life of your dryer.
Replaces Part Numbers
6931EL3001E, 1268363, 6931EL3001B, 6931EL3001C, AH3530481, EA3530481, PD00023869, EAP3530481, AP4440977, PS3530481, L125-31C, 503475.
Compatibility
This dryer thermostat is compatible with select LG and Kenmore dryer models.
Example compatible models include (but are not limited to): LG DLE2516W, DLE7177WM, and Kenmore 796.80272900.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Broad Compatibility – Fits select LG and Kenmore dryers
🔒 Reliable Safety – Prevents overheating by regulating dryer temperature
💰 Cost-Effective Replacement – OEM-equivalent performance at a lower price
🛠️ DIY-Friendly – Quick installation with basic tools
🛡️ Fixes Common Issues – Restores heating, prevents overheating, and fixes dryer shutdown problems
📐 Product Specification
Part Number: XP6931EL3001E
Component Type: Dryer Thermostat
Material: High-heat resistant metal and thermal components
Mounting: Direct replacement, mounts on heating element housing
Operating Conditions: Designed for residential dryers
Compliance: OEM-equivalent performance and safety standards
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, flathead screwdriver, needle-nose pliers
⚠️ Safety First: Always disconnect power before starting repairs to avoid electrical shock.
Steps:
Unplug dryer and remove back access panel.
Locate thermostat on heating element housing.
Disconnect wire terminals from the old thermostat.
Remove screws holding it in place and replace with the new thermostat.
Reconnect wires, secure the component, and reinstall the access panel.
Restore power and test dryer operation.
⏱️ Time Required: 15–20 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore your dryer’s safe operation today — Add to Cart Now for fast, budget-friendly repair!
XP15A-SB Ceramic Line Fuse, Slow Blow, 15A – 6.35 x 32 mm
Product Description
Protect electrical circuits from overload and short circuits with the XP15A-SB Ceramic Line Fuse, Slow Blow, 15A – 6.35 x 32 mm. This slow-blow (time-delay) fuse is designed to handle temporary current surges while providing reliable overcurrent protection for appliances and electronic equipment.
The ceramic body enhances heat resistance and arc containment, making it suitable for high-power applications such as microwave ovens, power supplies, industrial equipment, and control boards. When excessive current occurs, the fuse safely interrupts the circuit to prevent damage to internal components.
Replaces Part Numbers
WPM0805102, PD00097645, AP6014670, PS11747932, 3601-001197, 3601-000438, AP4046099, PS4131368, WB27X10454, WB08T10027, WB2X8151, WB02X8151, PD00032463, AP3189379, PS239596, 14QBP15CSB, TJ14QBP15CSB, CF15SB, 14QBP0243, 14QBP0315, 14QBP15CSB, 14QBP15GSB, AP5633499, MWF15B, HES-170-031, WPY01050009, PD00091249, OEM18072261, AP6024084,
Compatibility
This 15A slow-blow ceramic fuse is commonly used in:
Microwave ovens
Power supply units
Appliance control boards
Industrial equipment
Audio amplifiers
Always verify amperage (15A), size (6.35 x 32 mm), and slow-blow specification before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Slow Blow (Time Delay) – Handles temporary current surges
⚡ 15 Amp Rating – Protects against overload and short circuits
🔥 Ceramic Body Construction – High heat resistance and arc containment
📏 Standard Size – 6.35 mm x 32 mm (1/4" x 1-1/4")
💪 Reliable Circuit Protection – Designed for appliance and electronic safety
📐 Product Specification
Part Number: XP15A-SB
Type: Ceramic Line Fuse
Blow Type: Slow Blow (Time Delay)
Current Rating: 15 Amps
Voltage Rating: 250V
Size: 6.35 mm x 32 mm (1/4" x 1-1/4")
Application: Over-current protection
Quality Level: Aftermarket replacement
🛠️ Installation Notes
Tools Needed: Fuse puller or insulated pliers
⚠️ Safety First: Disconnect power before replacing any fuse to prevent electrical shock.
Basic Steps:
Turn off and unplug the device.
Locate the fuse holder.
Remove the blown fuse carefully.
Install the new XP15A-SB 15A slow-blow fuse.
Restore power and test operation.
⏱️ Time Required: Under 5 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance & Electrical Parts Supplier
🔄 30-Day Return Policy
Protect your equipment with reliable overcurrent protection — Add to Cart Now for a dependable replacement fuse!
XPARTCO 53-1096 Gas Dryer Thermostat - Compatible with Maytag, Amana, Magic Chef, Jenn-Air Dryers
Product Description
Keep your gas dryer safe and operational with the replacement 53-1096 Gas Dryer Thermostat. This high-limit thermostat is designed for select Maytag, Amana, Magic Chef, and Jenn-Air gas dryers, preventing overheating by shutting off the burner at 240°F and restarting at 200°F. It addresses issues like no heat, overheating, or premature shutoff, offering a cost-effective alternative to OEM parts.
Note: Includes one high-limit thermostat. Disconnect power and gas supply before installation. Often paired with thermal fuses (e.g., 53-1182, 53-0771) for comprehensive repairs.
Replaces part numbers: WP53-1096, 53-1096, PD00055179, AP6009640, PS11742808.
Compatibility:
Compatible with models including but not limited to:
Maytag: DG312, DG612, DG712, LDG7304AAL, LDG8604AAL, MDE3000AYW
Amana: NGD7200TW10, 4GNED4400YQ2
Magic Chef: CYG1005AXX, CYG2000AWW
Jenn-Air: JDE1000W, JDG1000W
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Maytag, Amana, Magic Chef, Jenn-Air, Norge, Admiral, and Crosley gas dryers.
🔥 Specifications: replacement high-limit thermostat, opens at 248°F, closes at 200°F, 25A at 240VAC.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, pliers, work gloves; typically installed in 15–20 minutes.
🛡️ Effective Fixes: Resolves no heat, overheating, or premature shutoff issues.
Product Specification
Part Number: 53-1096
Component Type: High-limit thermostat
Material: Metal and plastic
Mounting: Two 1/4" male spade terminals, includes mounting bracket
Operating Conditions: Suitable for high-temperature gas dryer environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source and gas supply before installation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running safely today!
Add to cart now for a budget-friendly fix!
XPARTCO DC47-00016A Dryer Thermal Fuse
The XPARTCO DC47-00016A is an aftermarket replacement thermal fuse for Samsung dryers. Mounted on the blower housing near the heat source, this fuse is a one-time safety device: as long as the dryer stays within its normal operating temperature, it does nothing at all, but the instant internal temperatures climb dangerously high — almost always from restricted airflow — the fuse permanently opens the circuit and cuts power to the dryer. That's why a blown thermal fuse produces such a specific symptom: the dryer won't start at all, with no lights, no tumble, and no response, even though the outlet has power.
This fuse terminates in 1/4" male spade connectors for a direct plug-in fit. Unlike a thermostat, a thermal fuse cannot be reset once it blows — it must be replaced. Critically, a blown thermal fuse is almost always a symptom rather than a random failure: restricted exhaust venting is the leading cause, since trapped heat is exactly what the fuse is designed to react to. A failing thermistor can also cause repeated fuse blows, since the two work together to regulate temperature. It directly replaces 2068545, AP4201894, AP4201899, PS4205213, EAP4205213, PS2038378, PS2038533, and 35001087.
Quick Answer
The XPARTCO DC47-00016A Dryer Thermal Fuse fixes Samsung dryers that won't start at all — no lights, no tumble, no response to any button — after overheating from restricted airflow. 1/4" male spade terminals. Replaces 2068545, AP4201894, AP4201899, PS4205213, EAP4205213, PS2038378, PS2038533, 35001087. Always inspect and clean the dryer venting when replacing this fuse — a blown fuse is a symptom of restricted airflow, and installing a new fuse without fixing the vent will likely blow it again.
Common Problems This Part Fixes
Dryer won't start at all — no lights, no tumble, no response to any button
Dryer that stopped working suddenly, especially after a load felt unusually hot
Dryer runs a short time then shuts off completely and won't restart
Repeated blown fuses on a dryer with a known venting or airflow restriction
Clothes coming out extremely hot right before the dryer stopped working
Dryer that recently smelled like burning or overheating before failing
Continuity test shows an open circuit across the old fuse
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer thermal fuse directly replaces the following OEM and cross-reference part numbers:
DC47-00016A, L0016A, AP4201894, PS4205213, AP6008681, EAP4205213, OEM12605691, EAP11741821, ASM868996, PD00005341, PD00003747, PS11741821, 35001087, WP35001087.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermal fuse is compatible with select Samsung dryers, and also fits select LG and Kenmore dryers built on a compatible platform, including model numbers such as:
DV209AEW/XAA, DV210AEW, DV210AEW/XAA
DV218AEB/XAA, DV218AEW/XAA, DV219AEW/XAA, DV220AEW, DV220AEW/XAA
DV330AEW, DV350AEW/XAA, DV419AEW/XAA
Note: This fuse is commonly paired with a matching thermistor (DC32-00007A) and thermostat (DC96-00887A / DC47-00018A), and manufacturer guidance recommends replacing the thermistor at the same time as the fuse, since the two work together and a failing thermistor is a common cause of repeated fuse blows. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement thermal fuse — one-time safety device that cuts power if the dryer overheats
Resolves "won't start at all," "stopped working suddenly," and "clothes came out extremely hot before it died" symptoms caused by a blown fuse
1/4" male spade terminal connectors for a direct plug-in electrical fit
Mounts to the blower housing near the heat source
Replaces 2068545, AP4201894, AP4201899, PS4205213, EAP4205213, PS2038378, PS2038533, and 35001087
Compatible with select Samsung, LG, and Kenmore dryers
Aftermarket replacement built to OEM-equivalent quality standards
Quick, simple repair — no special tools required beyond a basic screwdriver
Product Specifications
Part Number
DC47-00016A
OEM Part Number
DC47-00016A
Part Type
Dryer Thermal Fuse (Thermal Cut-Off)
Condition
Aftermarket Replacement
Location
Blower housing, near the heat source
Terminals
1/4" male spade connectors
Resettable
No — one-time use, must be replaced once blown
Companion Parts
Thermistor DC32-00007A, thermostat DC96-00887A / DC47-00018A
Quantity
1 thermal fuse
Compatible Brands
Samsung, LG, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — Inspect And Clean The Venting Before Reassembling Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel: remove the screws securing the panel to reach the blower housing where the fuse is mounted, usually alongside the thermistor. Photograph the wiring before disconnecting the spade terminals from the old fuse. Remove the mounting screw holding the fuse in place and pull it free, disconnecting both spade terminal wires. Before installing the new fuse, test it for continuity with a multimeter to confirm it's good out of the box, and test the old one to confirm it's actually blown (no continuity) rather than assuming. This is the most important step: fully inspect and clean the dryer's exhaust vent, from the lint trap housing all the way to the exterior vent hood, checking for lint buildup, crushed sections, or excessive length. A blown thermal fuse is a symptom of restricted airflow, and skipping this step means the new fuse is likely to blow again. Install the new DC47-00016A in the same mounting position, reconnect both spade terminals, and secure the mounting screw. Reinstall the rear panel, restore power, and run a test cycle to confirm normal heating and shutoff behavior. Tools needed: Phillips or nut driver (model-dependent), multimeter, vent brush or vacuum attachment for cleaning ductwork, work gloves.
Frequently Asked Questions
I replaced the fuse and it blew again. What's going on?
This is a strong sign that the underlying cause — almost always restricted airflow — was never addressed. Thermal fuses don't fail from age; they blow because the dryer overheated. If a new fuse keeps blowing, thoroughly inspect and clean the entire exhaust path from the lint trap housing to the outside vent hood, checking for lint buildup, crushed or kinked ductwork, or a vent run that's too long. If airflow checks out and the fuse still blows, have the thermistor and thermostat checked as well, since a failing thermistor can also trigger repeated fuse blows.
Can I just reset the thermal fuse instead of replacing it?
No. Unlike a thermostat, a thermal fuse is a one-time safety device — once it blows, its internal circuit is permanently broken and it cannot be reset or repaired. Replacement is the only option.
Should I replace the thermistor at the same time as the fuse?
It's worth strongly considering, and it's a common manufacturer recommendation. The thermistor and thermal fuse work together to manage temperature, and a failing thermistor can cause the dryer to run hotter than it should, leading directly to repeated fuse blows. Replacing both together, especially if your dryer has blown this fuse more than once, addresses the more likely root cause rather than just the symptom.
My clothes came out extremely hot right before the dryer died. Is that related?
Yes, this is a classic warning sign. Clothes coming out unusually hot indicates the dryer was already running hotter than normal, which is exactly the condition that leads to a blown thermal fuse. If you noticed this before the dryer stopped working, it strongly points to a ventilation or airflow problem that should be fully addressed before running the dryer again.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications, spade terminal connections, and mounting configuration of the original DC47-00016A thermal fuse used in compatible Samsung, LG, and Kenmore dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO EXP497 Microwave Door Switch (Normally Open)
The XPARTCO EXP497 is an aftermarket replacement Normally Open (NO) microwave door interlock switch compatible with a wide range of GE, Whirlpool, Samsung, LG, Frigidaire, Kenmore, Panasonic, and Sharp microwaves. The door interlock switch is one of several safety switches in the microwave door system. It allows the microwave to operate only when the door is fully closed — when the door closes, the switch is mechanically activated, completing the circuit and signaling the control board that it's safe for the magnetron to fire. When the door is open, the switch is released and the circuit is broken, preventing the microwave from generating microwave radiation.
This switch is rated for 16A at 125/250V AC, giving it the heavy-load capacity required for microwave door safety circuits. It directly replaces an extensive list of cross-reference part numbers from multiple manufacturers, including 3B73362F, SZM-V16-FA-63, WB24X816, WB24X829, WB24X10180, 6600W1K003C, WP56001036, 5304408938, AP4437957, PS3522738, and dozens more. Important: confirm your original switch is a Normally Open (NO) type before ordering — this part will not replace Normally Closed (NC) or COM-style switches. Installs in 15–25 minutes with basic hand tools.
Quick Answer
The XPARTCO EXP497 Microwave Door Switch (Normally Open) fixes microwaves that won't start, won't heat, stop mid-cycle, or won't shut off when the door opens. Universal-fit Normally Open (NO) interlock switch, 16A at 125/250V AC. Replaces 3B73362F, SZM-V16-FA-63, WB24X816, WB24X829, WB24X10180, 6600W1K003C, WP56001036, 5304408938, AP4437957, PS3522738 (and many more). Compatible with GE, Whirlpool, Samsung, LG, Frigidaire, Kenmore, Panasonic, and Sharp microwaves. Important: confirm your original switch is "Normally Open" before ordering.
Common Problems This Part Fixes
Microwave won't start when the door is closed and the start button is pressed
Microwave runs but produces no heat — turntable spins, light works, but food doesn't warm
Microwave starts and then immediately stops mid-cycle
Microwave continues running with the door open (unsafe failure mode — replace immediately)
Intermittent start failure — works sometimes, doesn't work other times
Door switch button visibly stuck, broken, or fails to click when pressed
Multimeter continuity test on the switch shows it doesn't change state when actuated
Replaces Part Numbers
This Normally Open microwave door switch directly replaces an extensive list of OEM and cross-reference part numbers:
3B73362F, 3B73362E, 6600W1K003D, 6600W1K004C, 6600W1K004F, AH3522738, EA3522738, AP4437957, PS3522738, WB24X816, WB24X0816, AP2024324, QSWMA085WRE0, QSWMA168WRZZ, WB24X10180, AH2370055, EA2370055, AP4484237, PS2370055, 00606693, 00415824, 1386418, 35-00-780, 415824, 606693, AH3477005, EA3477005, PS3477005, AP4070531, PS8726630, 00633795, 00415825, 35-00-781, 415825, 4162223, AP5952985, PS10060855, WB23X10019, 1810578, AH3486591, EA3486591, AP4980343, PS3486591, WB24X10204, WB24X10148, WB24X28940, 251201600929, 3025958, AP5790848, PS8754454, 5304408938, 5304430284, 639405, AH471434, EA471434, AP2151217, PS471434, WB24X10047, WB24X10029, WB24X0815, WB24X10072, WB24X10113, WB24X815, AH237015, EA237015, AP2622452, PS237015, 5304408938, 5304430284, 639405, AH471434, EA471434, AP2151217, PS471434, 5304423463, 892734, AH472733, EA472733, AP2151744, PS472733, 5304493153, 5304440026, 3018427, 5303319558, 5304467694, 75304440026, 75304467694, AP5804011, PS8769124, WB24X10139 1086028, AH953555, EA953555, PS953555, AP3792702, WB24X10140 AH953556, EA953556, AP3792654, PS953556, WB24X829, WB24X10038, WB24X368, WB24X384, WB24X414, WB24X426, WB24X439, WB24X441, WB24X445, WB24X796, WB24X5228, WB24X796, AP2024337, AH237421, EA237421, PS237421, WP56001036, 56001036, 0053464, R0654097, AP6009674, PS11742843, 3405-001034, 3405-000178, 111698, 2028597, AP4044834, PS4131192, WB24X823, WB24X0820, WB24X0823, WB24X820, AH237415, EA237415, AP2024331, PS237415, 5304509460, 5304520020, 5304464099, 4583656, AP6230615, PS12071303, WB24X28941, AH1019163, EA1019163, MW-7100-33, AP3866977, PS1019163, 5304493153, 5304440026, 3018427, 5303319558, 5304467694, 75304440026, 75304467694, AP5804011, PS8769124, D3V-16G-3C25, SZM-V16-FA63.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This Normally Open door switch is compatible with select microwaves from a wide range of brands:
GE microwaves (countertop, over-the-range, and built-in models)
Whirlpool microwaves
Samsung microwaves
LG microwaves — MV, LMV, LMH, MQ, MS, LMA, LMVM series (MV1560M, MV1310W, MV1560T, LMV1625B, LMA2112WT, MS1443ASV, LMH1017CVST and many more)
Frigidaire microwaves
Kenmore / Sears microwaves (multi-brand built models)
Panasonic microwaves
Sharp microwaves
Bosch microwaves (select models — cross-references 00606693, 00633795)
Important — Confirm Switch Type Before Ordering: This is a Normally Open (NO) switch. Microwaves typically use 2–3 door switches: one Normally Open and one or two Normally Closed/COM. They are not interchangeable. Inspect your original switch's markings or test it with a multimeter before ordering — if your failed switch is Normally Closed, you need the EXP499 instead. If you're unsure, contact our support team with your microwave model number.
Key Features
Normally Open (NO) microwave door interlock switch — closes the circuit when the door is closed, allowing the microwave to operate
Rated 16A at 125/250V AC — heavy-duty capacity for microwave door safety circuits
Universal fit — replaces door switches from GE, Whirlpool, Samsung, LG, Frigidaire, Kenmore, Panasonic, Sharp, and Bosch
Replaces 50+ OEM and aftermarket cross-reference part numbers across multiple appliance brands
Common alternate part numbers include 3B73362F, SZM-V16-FA-63, D3V-16G-3C25, AP4437957, and PS3522738
Important: verify your switch is Normally Open before ordering — NOT a replacement for Normally Closed (use EXP499) or COM-style switches
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 15–25 minutes with basic hand tools
Product Specifications
Part Number
EXP497
Part Type
Microwave Door Interlock Switch (Normally Open)
Condition
Aftermarket Replacement
Application
Microwaves (cross-brand)
Switch Type
Normally Open (NO)
Max Current
16A
Voltage Rating
125/250V AC
Common OEM Equivalents
3B73362F, SZM-V16-FA-63, D3V-16G-3C25
Compatible Brands
GE, Whirlpool, Samsung, LG, Frigidaire, Kenmore, Panasonic, Sharp, Bosch
Installation Notes
⚠️ High-Voltage Safety Warning — Microwave Capacitor Microwaves contain a high-voltage capacitor that can hold a lethal electrical charge even after the appliance is unplugged. Before opening the microwave cabinet to access the door switches, always unplug the unit and discharge the high-voltage capacitor using proper safety procedure (with an insulated screwdriver across the capacitor terminals while wearing insulated gloves). If you are not familiar with safely discharging a microwave capacitor, have this repair done by a qualified technician.
⚠️ Wear Work Gloves — Identify Switch Position Before Removing Disconnect power before beginning. Wear work gloves to protect your hands. After safely discharging the high-voltage capacitor, remove the microwave's outer cabinet or control panel as needed to access the door interlock switch assembly — typically located behind the right side of the door frame on most microwaves. Take a photo of all switch positions and wire connections before disconnecting anything. Microwaves usually have 2–3 switches in the door interlock assembly: confirm which one is the Normally Open switch (the EXP497 fits this position only). Disconnect the wires from the old switch — make a note of which wire goes where. Release the switch from its mounting tabs and pull it free. Install the new EXP497 in the same position with the same wire connections. Reassemble the cabinet, restore power, and test the microwave by closing the door and confirming it starts and heats normally, then opening the door and confirming it shuts off immediately. Tools needed: Phillips screwdriver, work gloves, insulated tools (for capacitor discharge).
Frequently Asked Questions
What's the difference between a Normally Open and Normally Closed microwave door switch?
Microwave door interlock systems use both types together to provide redundant safety. A Normally Open (NO) switch — like the EXP497 — has open contacts at rest; when the door closes and pushes the switch button, the contacts close to complete a circuit, signaling "door closed." A Normally Closed (NC) switch is the opposite — contacts are closed at rest and open when the door pushes the button. Most microwaves use one or more of each type wired together so the control system can confirm the door is genuinely closed from multiple inputs. They are not interchangeable — you must replace each switch with the same type. If your switch is NC, order the EXP499 instead.
How do I know if I need the Normally Open or Normally Closed switch?
The easiest way is to read the part number printed on the side of the failed switch and compare it to the cross-reference lists for the EXP497 (Normally Open) versus the EXP499 (Normally Closed). If the markings are unreadable, you can also test the switch with a multimeter set to continuity mode: with the switch at rest (button released), a Normally Open switch reads open (no continuity) and a Normally Closed switch reads closed (continuity). Replacing each switch with the same type is essential — installing the wrong type can prevent the microwave from starting or create unsafe conditions.
My microwave runs but doesn't heat — could this be the door switch?
Yes — this is one of the most recognizable symptoms of a failed door switch in a multi-switch interlock system. A microwave that turns on (light, fan, turntable) but does not heat often has a failed door switch in one of the door positions while the others continue to work. The control system may allow the auxiliary components to run but blocks the magnetron from firing without confirmation from all switches. Check all door switches systematically — one Amazon review noted a customer needed three identical switches to fully repair their microwave because the third switch (at the top of the door) was the actual cause of the no-heat condition. Replacing all door switches together is a common approach.
My microwave keeps running with the door open — what should I do?
This is a serious safety concern. Disconnect power to the microwave immediately and do not use it until the door switch is replaced. A microwave that continues to run with the door open exposes you to microwave radiation, which can cause serious injury. This usually indicates one or more door switches are stuck in the "door closed" position. Replace the failed switches with matching NO or NC type (EXP497 for NO, EXP499 for NC) before using the microwave again.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a manufacturer-branded OEM switch from any single brand, but is manufactured to match the dimensions, contact configuration, and 16A/125-250V AC rating of the dozens of OEM door switches it cross-references across multiple appliance brands.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
5 Pack - XPFH065A Microwave 5kV 0.65A High Voltage Fuse - Compatible with LG, Samsung, Whirlpool, Sharp, Panasonic, Bosch and many other Microwaves
Product Description
Protect your microwave with the replacement XPFH065A Microwave 5kV 0.65A High Voltage Fuse. This replacement fuse safeguards the electrical system in LG, Samsung, Whirlpool, Sharp, Panasonic, Bosch, Siemens, and many other microwaves by breaking the circuit during power surges or faults (0.65A, 5.0kV). Featuring a fast-blow glass fuse (6x40mm), it resolves issues like no power, blown fuses, or intermittent failures.
Note: Includes one fuse. Disconnect power before installation. Handle glass fuse carefully. Excess cable may need to be tied back.
Replaces part numbers: XPFH065A, XPFH065A, XPFH-065-5KV, F650mA L5KV, EAF36358301, AP5249671, AH3620511, EA3620511, PS3620511.
Compatibility:
Compatible with models including but not limited to:
LG, Samsung, Whirlpool, Sharp, Panasonic, Bosch, Siemens, Daewoo, Fagor, Brandt, Candy, Hitachi, De Dietrich, Proline, Scholtes, Midea, Galanz: Select models requiring 0.65A, 5.0kV fuse
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG, Samsung, Whirlpool, Sharp, Panasonic, Bosch, Siemens, Daewoo, Fagor, Brandt, Candy, Hitachi, De Dietrich, Proline, Scholtes, Midea, and Galanz microwaves.
🔥 Specifications: replacement high voltage fuse with holder, 0.65A, 5.0kV, fast-blow, glass fuse.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires needle-nose pliers, Phillips screwdriver, work gloves; typically installed in 15–25 minutes.
🛡️ Reliable Fixes: Addresses microwave not powering on, blown fuses, or intermittent power issues.
Product Specification
Part Number: XPFH065A
Fuse Type: Fast-blow, high voltage
Current Rating: 0.65A (650mA)
Voltage Rating: 5.0kV (5000V)
Fuse Material: Glass tube
Fuse Dimensions: 6mm diameter x 40mm length (1/4" x 1-5/8")
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the microwave from the power source before installation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Get your microwave running today!
Add to cart now for a budget-friendly fix!
