XPARTCO WD01X29878 Dishwasher Door Latch – Compatible with GE Dishwashers
Product Description
Restore secure door closing and proper dishwasher operation with the XPARTCO WD01X29878 Dishwasher Door Latch. This high-quality aftermarket replacement ensures the dishwasher door locks firmly during wash cycles and signals the control board that it is safe to operate. A faulty door latch can cause the dishwasher not to start, stop mid-cycle, or display door-related error codes. Replacing it with this reliable XPARTCO latch helps restore safe and dependable washing performance.
XPARTCO offers cost-effective aftermarket appliance parts engineered to match original fit and function.
Replaces Part Numbers
WD01X29878, WD01X27701, 265D1214G004, EG-380944, PD00072017, FIX16659468, 4979622, AP7176296, PS16659468.
Compatibility
This replacement dishwasher door latch fits select GE dishwashers.
Common compatible models include (but are not limited to):
GE GDT655SSJSS
GE GDF630PGMWW
Always verify your dishwasher’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM fit and electrical function
🔒 Secure Door Locking – Ensures dishwasher runs only when door is properly closed
⚙️ Fixes Start Issues – Resolves no-start or cycle interruption problems
🧩 Direct-Fit Design – Installs without modification
💰 Cost-Effective Repair – Affordable alternative to OEM door latches
📐 Product Specification
Part Number: WD01X29878
Component Type: Dishwasher Door Latch Assembly
Function: Door locking and safety interlock
Mounting: Screw-mounted, plug-in harness
Application: Dishwasher door safety system
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver
⚠️ Safety First: Unplug the dishwasher or turn off the breaker before servicing to avoid electrical shock.
Basic Steps:
Disconnect dishwasher power.
Remove the inner door panel screws.
Locate and disconnect the old door latch assembly.
Remove mounting screws and take out the latch.
Install the new XPARTCO WD01X29878 latch.
Reconnect wiring and reassemble the door panel.
Restore power and test operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore secure dishwasher operation and prevent door-related errors — Add to Cart Now for a dependable, budget-friendly repair!
4 Pack - XPARTCO DD66-00023A Dishwasher Lower Dish Rack Roller - Compatible with select Samsung models
Product Description
Restore smooth operation to your dishwasher with the XPARTCO DD66-00023A Dishwasher Lower Dish Rack Roller. This replacement roller is designed as a replacement for select Samsung dishwashers, offering a cost-effective alternative to the original. It supports the lower dish rack, ensuring it glides smoothly in and out for easy loading and unloading. This part addresses issues like the rack sticking, wobbling, or falling off the rails, often caused by worn or broken rollers.
Note: Includes (1) lower dish rack roller. Disconnect power before installation. Verify compatibility with your dishwasher model.
Replaces part numbers: DD66-00023A, PD00002184, EAP4222532, DW0023A, AP4342187, 2002711, PS4222532.
Compatibility:
Compatible with select Samsung dishwasher models, including but not limited to:
Samsung: DW80J3020US/AA-0000, DW80J3020US/AA-0001, DW80J3020US/AA-0002, DW80J3020US/AA-0003, DW80J3020US/AA-0004, DW80J3020US/AA-0005, DW80J3020US/AA-0006, DW80J3020US/AA-0007, DW80J3020US/AA-0008, DW80J3020US/AA-0009, DW80J3020US/AA-0010, DW80J3020US/AA-0011, DW80J3020US/AA-0012, DW80J3020US/AA-0013, DW80J3020US/AA-0014
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung dishwashers.
🔧 Specifications: High-quality plastic roller with metal axle.
💪 Reliable Performance: Ensures smooth gliding of the lower dish rack.
🛠️ Easy Installation: Tool-free; typically installed in 5–10 minutes.
🛡️ Effective Fixes: Resolves sticking, wobbling, or falling rack issues.
Product Specification
Part Number: XPARTCO DD66-00023A
Component Type: Dishwasher lower dish rack roller
Material: Plastic
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dishwasher from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dishwasher running smoothly today!
Add to cart now for a reliable fix!
WPW10212598CM Washer Water Valve
120V, 60Hz, single coil hot water valve.
Replaces Part Numbers: WPW10212598, W10212598, 1551648, OEM18051530, AP6017175, PS11750470.
Description: This Valve is a replacement part for specific Whirlpool washing machine models. This valve is responsible for controlling the flow of water into the washing machine during various cycles and operations. Causes of a bad valve can include mineral or sediment buildup restricting water flow, worn seals or diaphragms allowing leaks, or mechanical failure of internal components.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
Supco WV9346 Washer Water Valve with Thermistor
Two solenoid valve with 50 Ohm thermistor
120V
Replaces part Numbers:WP3979346, 3979346, 3979347, 8578342, AP6009052, PS11742194, WP3979346VP.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
W11220205CM Washer Water Valve (Hot Side)
120V, 60Hz, two coil hot water valve.
Fits Whirlpool top load washers.
Replaces Part Number:W11220205, W10240947, WPW10240947, W10921516, AP6329242, PS12349460.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
8181694CM Washer Water Valve
Two solenoid valve with 50 ohm thermistor.
Fits specific Whirlpool front load machines.
Replaces Part Numbers: WP8181694, 8181694, 906483, WV1694, OEM18035147, AP6011714, PS11744913, WP8181694VP.
Description: This Inlet Valve is a replacement part for specific Maytag, Whirlpool washing machine models. This valve is critical for controlling the flow of water into the washing machine, ensuring that the right amount of water is supplied for various washing cycles. It consists of solenoids that open and close to allow hot and cold water to enter the wash tub at the appropriate times, according to the selected wash settings.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
DC62-00142GCM Washer Water Valve (Cold Side)
Replaces Part Number: DC62-00142G, 2070188, DC62-00142D, AP4211934, PS4208672, WP34001248, 34001248, DC62-00142D, AP6008413, PS11741549, B01M1P5FE2
3-way cold water valve.
Fits specific Samsung and Kenmore washer models.
Description: This Water Valve is a replacement part for specific Samsung, Whirlpool washing machine models. This Washer Water Inlet Valve is essential for maintaining a steady and reliable water supply to washing machine models. This replacement part ensures compatibility with a wide range of Samsung washer models, providing a perfect fit and seamless integration. Crafted from high-quality materials, the valve effectively controls the water flow, preventing leaks and ensuring that your washer operates efficiently during each cycle.
This is an aftermarket part that can be used as a replacement for the OEM part.
134637810CM Washer Water Valve
Replaces Part Numbers: 134637810, 134637800, 1482877, 7134637800, 7134637810, AH2349248, EA2349248, AP4368791, PS2349248.
Description: This Water Dispenser Valve is a replacement part for specific Frigidaire washing machine models. This valve controls the flow of water into the washing machine during the wash and rinse cycles. It ensures that the correct amount of water enters the drum, contributing to efficient and effective cleaning. Causes of a bad water dispenser valve can include mineral deposits or debris clogging the valve, wear and tear over time, or electrical faults that affect the valve’s operation.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
22004333CM Washer Water Valve
120V, 50/60Hz, dural coil, GHT inlet, barb outlet.
Fits Maytag top load washers.
Replaces Part Numbers:WP22004333, 22004333, 22004191, AP6006446, PS11739520.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WPW10212596CM Washer Water Valve
120V, 60Hz,
two coil cold water valve.
Fits Whirlpool front load washer.
Replaces Part Numbers:WPW10212596, W10212596, 1551647, AP6017174, PS11750469, WPW10212596VP.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
