Genuine OEM WH22X38697 Washer Main Control Board
The Genuine OEM GE WH22X38697 is the main control board for select GE front-load washers. The main control board is the electronic control for the washer, so it is replaced when it has been diagnosed as the cause of a washer fault.
This is the original GE part, not an aftermarket equivalent. It is sold individually. Check your model number before ordering, because GE uses many similar control boards with different part numbers.
Quick Answer
The Genuine OEM WH22X38697 Main Control Board replaces the main control board on a compatible GE front-load washer when it has failed. Replaces WH22X29546, WH22X30897, WH22X32058, WH22X32458, WH22X34357, WH22X34660, WH22X35518, WH22X36638 and WH22X37837. Confirm the board is the cause before replacing it.
When To Replace This Part
The main control board has been diagnosed as faulty
Your old board carries one of the superseded numbers listed below
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This main control board replaces or supersedes the following part numbers:
WH22X38697, WH22X37837, WH22X36638, WH22X32458, WH22X35518, WH22X30897, WH22X29546, WH22X32058, WH22X34660, WH22X36858, WH22X37838, AGE26929, AP8054699, OEM24164106, PD00093156, PS17874598
If your old board shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This main control board is listed for select GE front-load washers. Retailers do not publish a model list for this part, so please verify your model before ordering.
Note: GE sells many similar-looking washer control boards under different part numbers, and not all are interchangeable. Send us your full model number, or check it against your parts diagram, and we'll verify fit before you order.
Key Features
Genuine OEM GE part, not an aftermarket equivalent
Main control board for select GE front-load washers
Replaces nine earlier GE control board part numbers
Sold individually
Product Specifications
Part Number
WH22X38697
OEM Part Number
WH22X38697
Part Type
Washer Main Control Board
Condition
Genuine OEM
Manufacturer
GE
Quantity
1 Board
Application
Select GE Front-Load Washers
Installation Notes
⚠️ Disconnect Power And Water Before Installing Unplug the washer and turn off the water supply before you begin. Control boards are sensitive to static, so touch bare metal on the washer frame before handling the board. Photograph or label each wire connector, disconnect them, and remove the old board. Fit the new board, reconnect every connector to its original position, restore power and water, and run a test cycle.
Frequently Asked Questions
How do I know the control board is the problem?
Control boards share symptoms with other parts, such as switches, sensors, wiring and motors. Check those and your model's service guide first, and confirm the board is at fault before replacing it.
Is this an OEM or aftermarket part?
This is a genuine OEM part from GE, not an aftermarket equivalent.
Does this replace my old board number?
It replaces WH22X29546, WH22X30897, WH22X32058, WH22X32458, WH22X34357, WH22X34660, WH22X35518, WH22X36638 and WH22X37837. If your board shows another number, contact our support team and we'll check it.
Will this fit my washer?
It is listed for select GE front-load washers, but no model list is published for this part. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
DA32-00006W Genuine Samsung OEM Refrigerator Thermistor
Refrigerator defrost temperature sensor.
Replaces Part Numbers: DA32-10105R, DA32-00006W, DA32-00006U, 2030342, DA32-00006B, DA32-00006C, DA32-00006D, DA32-00006L, DA32-00006M, DA32-00006T, DA32-00006V, AP4135567, PS4138681.
The Samsung Defrost Sensor is a genuine part designed specifically for Samsung refrigerators. This sensor, sometimes referred to as a defrost thermostat or defrost temperature sensor, is an integral part of your refrigerator's defrost system.
DA47-00244QCM Refrigerator Defrost Heater
115V, 120W element with defrost thermostat.
Fits FF evaporator in Samsung bottom freezers.
Replaces Part Numbers:DA47-00244Q, AP5587899, PS4140528.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
215846604 Genuine OEM Frigidaire Refrigerator Defrost Timer
The 215846604 is a genuine Frigidaire OEM defrost timer, mounted inside the refrigerator near the top of the back wall. This timer is the scheduler for the defrost circuit: on a set cycle, it switches the refrigerator out of normal cooling mode and into a defrost mode, energizing the defrost heater long enough to melt any frost that has accumulated on the evaporator coil, then switches back to cooling once defrost is complete. This cycle repeats automatically for as long as the refrigerator runs, which is why a healthy timer is essential to preventing frost buildup in the first place.
Rated 120V with a 6 hour, 21 minute cycle, measuring approximately 1.5"H x 3.2"L x 2.3"W. When this timer fails, the defrost heater never gets the signal — and the electrical energy — it needs to run, so frost keeps accumulating on the coil unchecked. A failing timer typically shows up as heavy frost or ice buildup on the evaporator coil, a freezer that runs too cold or too warm, or a refrigerator section that isn't cooling properly because ice-caked coils can't transfer heat efficiently anymore. It directly replaces AP2592907, 08003824, 08011620, 1748201, 241809401, 241809402, 442754, 5300541134, 5300800692, 5308003824, AH423802, EA423802, PS423802, and CC304.
Quick Answer
The 215846604 Genuine OEM Frigidaire Refrigerator Defrost Timer fixes Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers with heavy frost or ice buildup on the evaporator coil, a freezer running too warm or too cold, or a refrigerator section not cooling properly. 120V, 6 hour 21 minute defrost cycle. Replaces AP2592907, 08003824, 08011620, 1748201, 241809401, 241809402, 442754, 5300541134, 5300800692, 5308003824, AH423802, EA423802, PS423802, CC304. Before replacing, test the defrost thermostat and defrost heater with a multimeter — if both test good, the timer is the most likely faulty component.
Common Problems This Part Fixes
Heavy frost or ice buildup on the evaporator coil
Freezer compartment running too cold or too warm
Refrigerator section not cooling properly
Refrigerator or freezer overheating
Refrigerator running constantly as ice-caked coils reduce cooling efficiency
Frost visible on interior walls or around the back panel
Defrost heater not activating on its normal schedule
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator defrost timer directly replaces the following OEM and cross-reference part numbers:
215846604, 08003824, 08011620, 1748201, 241809401, 241809402, 29811-3, 442754, 5300541134, 5300800692, 5308003824, 54113-1, 54113-4, 55448-3, 55448-4, 55467-1, 8003824, AH423802, CC304, EA423802, F111812, G000158274, G000158291, G000173814, G000187005, G000187464, G158274, G163818, G169069, G173814, G174821, G178820, G185160, G187464, K1224661, K1224662, K1226501, K1226502, K1227229, K1227920, K1227927, K1228104, K1228105, K1230354, K1230534, K1233374, K1233375, NR00422503, R000422503, R000900129, R422503, W188C189A06, W188C189A07, WR422503, PD00005279, EAP423802, AP2592907, PS423802.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This defrost timer is compatible with select Frigidaire refrigerators and freezers, and also fits select Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers built on the same Frigidaire/Electrolux platform.
Note — not the same as 215846602: This timer runs a 6 hour, 21 minute defrost cycle. A similarly-numbered part, 215846602, runs a different cycle (6 hour, 40 minute) and replaces a separate set of numbers (215846606, 240371001, 241621501, AP2111929, PS423801). The two are not interchangeable. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which timer fits your refrigerator.
Key Features
Genuine Frigidaire OEM part — factory-specified cycle timing and switch contacts
Automatically schedules the refrigerator's transition between cooling and defrost modes
6 hour, 21 minute defrost cycle
Resolves "frost buildup on the coil," "freezer too cold or too warm," and "refrigerator not cooling" symptoms caused by timer failure
Compact size: approximately 1.5"H x 3.2"L x 2.3"W
Direct drop-in replacement — mounts to the original bracket with the same wiring harness connector
Replaces AP2592907, 08003824, 08011620, 1748201, 241809401, 241809402, 442754, 5300541134, 5300800692, 5308003824, AH423802, EA423802, PS423802, and CC304
Compatible with Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
215846604
Part Type
Refrigerator Defrost Timer
Condition
Genuine OEM
Brand
Frigidaire
Voltage
120V
Defrost Cycle
6 hours, 21 minutes
Location
Inside the refrigerator, near the top of the back wall
Height
1.5 in.
Length
3.2 in.
Width
2.3 in.
Weight
Approx. 2.75 oz.
Repair Difficulty
Easy — basic tools required
Quantity
1 defrost timer
Compatible Brands
Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, Westinghouse
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Locate the defrost timer control inside the refrigerator, typically near the top of the back wall — on some models it may be located behind a rear access panel or near the control housing instead, so check your specific model if it isn't immediately visible. Photograph the wiring harness connector before disconnecting anything. Use a screwdriver to remove the screws securing the timer in place, then carefully disconnect the wiring harness from the back of the old timer. Connect the wiring harness to the new 215846604 timer, matching the original connector orientation, and secure it in place with the mounting screws. Restore power and monitor the refrigerator over the next day to confirm the defrost cycle is running on schedule and frost is no longer accumulating excessively on the coil. Tools needed: screwdriver, work gloves.
Frequently Asked Questions
How do I know if the timer is actually the problem and not the defrost heater or thermostat?
The defrost timer, defrost heater, and defrost thermostat all work together in the same circuit, so it's worth testing the other two before assuming the timer has failed. Test the defrost thermostat and the defrost heater with a multimeter — if both test as functioning properly, it's very likely the timer is the faulty component causing the defrost cycle not to run.
There's heavy frost or ice on the coil. Is that definitely the timer?
It's one of the most common causes. If the timer fails to advance into the defrost portion of its cycle, the heater never gets the signal or the power it needs to run, so frost keeps accumulating on the evaporator coil with nothing to melt it off. This is exactly the scenario this timer is designed to prevent when it's working correctly.
What's the difference between 215846604 and 215846602?
These are different timers with different cycle lengths — this 215846604 runs a 6 hour, 21 minute cycle, while 215846602 runs a 6 hour, 40 minute cycle and replaces a separate group of part numbers. They are not interchangeable, so always confirm which specific number your refrigerator's parts diagram calls for before ordering.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original cycle timing, switch contacts, and wiring harness configuration of the defrost timer originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DA32-10105RCM Refrigerator Temperature Sensor
Replaces Part Numbers: DA32-10105R, DA32-00006W, DA32-00006U, 2030342, DA32-00006B, DA32-00006C, DA32-00006D, DA32-00006L, DA32-00006M, DA32-00006T, DA32-00006V, AP4135567, PS4138681.
1" probe, 25.75" lead with two pin connectors.
Fits Specific Samsung Refrigerator Models.
This Defrost Sensor is a replacement part designed specific Samsung refrigerator models. This sensor, sometimes referred to as a defrost thermostat or defrost temperature sensor, is an integral part of your refrigerator's defrost system.
This is an aftermarket part that can be used as a replacement for the OEM part.
WR60X10318 Genuine OEM GE Refrigerator Evaporator Fan Motor
The WR60X10318 is a genuine GE OEM evaporator fan motor assembly used in side-by-side refrigerators, complete with an integrated 2-wire thermistor built right into its 6-pin wiring harness. This motor draws air across the evaporator coil and circulates it through both the fresh food and freezer compartments, while the built-in thermistor reports temperature back to the control board so it can regulate cooling accurately. Because the thermistor and fan motor arrive as a single assembly, a fault in either function shows up together, and replacing this one part addresses both.
The harness and plug measure approximately 13-7/8" in length. Common failure causes include worn motor bearings that eventually seize the shaft entirely, debris or ice buildup around the fan blade, and general electrical wear over time. On this side-by-side platform, a classic failure sequence is a bearing that starts out noisy, then progressively worsens until the motor freezes up completely — once the fan stops moving air, the evaporator coil often ices over heavily since moisture keeps accumulating with nowhere for the resulting cold air to go. Symptoms include unusual noise from the freezer, inconsistent or warm temperatures in either compartment, visible frost buildup on the coil, and a refrigerator that runs continuously trying to compensate. It directly replaces AP4981643, PS3487992, EAP3487992, and 1812462.
Quick Answer
The WR60X10318 Genuine OEM GE Refrigerator Evaporator Fan Motor fixes GE side-by-side refrigerators with unusual noise from the freezer, warm or inconsistent temperatures, frost or ice buildup on the evaporator coil, or a refrigerator running constantly. Complete assembly with integrated 2-wire thermistor on a 6-pin, 13-7/8" harness. Replaces AP4981643, PS3487992, EAP3487992, 1812462. Not the same part as our WR60X10307 or WR60X10185 listings — those are separate motors for different GE refrigerator platforms.
Common Problems This Part Fixes
Unusual noise — grinding, buzzing, or humming — coming from the freezer compartment
Inconsistent or warm temperatures in the fresh food or freezer compartment, or both
Visible frost or ice buildup on the evaporator coil
Refrigerator running continuously as it struggles to maintain temperature
Fan motor bearing noise that has progressively worsened, sometimes ending in the motor seizing entirely
Freezer icing over heavily while temperatures in both compartments climb
Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10318, AP4981643, AGE29310, OEM14944938, PD00023381, PS3487992, EAP3487992, 1812462
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE side-by-side refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, and Kenmore refrigerators built on the GE platform. In rare instances, this part is also referenced for compatibility with some LG models.
Note: GE uses several different evaporator fan motors across its refrigerator lineup. This WR60X10318 assembly is a separate part from our WR60X10307 and WR60X10185 listings, which serve different model platforms and have their own distinct cross-reference numbers. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs.
Key Features
Genuine GE OEM part — factory-specified motor, blade, and integrated thermistor design
Complete assembly — includes the fan motor plus a 2-wire thermistor built into the 6-pin harness
Resolves "unusual noise from the freezer," "warm or inconsistent temperatures," "frost or ice buildup," and "runs continuously" symptoms caused by fan motor failure
Approximately 13-7/8" harness and plug length
Direct drop-in replacement matching the original mounting and blade fitment
Replaces AP4981643, PS3487992, EAP3487992, and 1812462
Genuine OEM replacement — guaranteed fit, materials, and performance
DIY-friendly repair, though side-by-side units can have tight working clearance around the fan
Product Specifications
Part Number
WR60X10318
Part Type
Refrigerator Evaporator Fan Motor Assembly (with Thermistor)
Condition
Genuine OEM
Brand
GE
Application
Side-by-Side Refrigerators
Integrated Component
2-wire thermistor built into the wiring harness
Harness Connector
6-pin
Harness/Plug Length
Approx. 13-7/8 in.
Production Numbers
197D4964G011, FDQT26GE7
Quantity
1 fan motor assembly
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Side-by-Side Units May Have Tight Clearance Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. On side-by-side models, access can be tight: you may need to remove the rear interior panel, the ice maker, and a fan cover to reach the motor, so budget extra time and patience compared to a simpler platform. If the evaporator coil is heavily iced over, let the unit sit unplugged with the door open for several hours, or run a manual defrost, before continuing — ice can make the old motor difficult to remove cleanly and may be masking the actual point of failure. Photograph the 6-pin wiring harness connector and the fan blade's orientation before disconnecting anything. Remove the mounting screws holding the fan assembly in place, unplug the wiring harness connector, and slide the old assembly out of its housing. Slide the new WR60X10318 assembly into the same housing, secure it with the mounting screws, and reconnect the harness connector fully. Confirm the blade spins freely by hand without contacting the housing before reassembling the fan cover, ice maker, and rear panel. Restore power, open the door to test the fan, and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, 1/4" and 5/16" nut drivers, work gloves, and a headlamp or flashlight for visibility in tight spaces.
Frequently Asked Questions
My freezer is heavily iced over and both compartments are warm. Is this the fan motor?
Yes, this is a very common failure sequence on this platform. Once the evaporator fan motor's bearings wear out and the motor slows or seizes, air stops circulating away from the coil, moisture keeps condensing on it, and ice builds up heavily. Once that happens, both the freezer and fresh food compartments typically lose cooling together, since neither is getting circulated cold air anymore. Thawing the ice and confirming the fan motor doesn't spin freely by hand will confirm this diagnosis.
Does this include the thermistor, or do I need to buy that separately?
It's included. This assembly ships with a 2-wire thermistor built directly into the 6-pin wiring harness, so you don't need to source or install a separate thermistor component — replacing this one part addresses both the fan motor and the thermistor together.
Why is access so tight on my side-by-side refrigerator?
Side-by-side refrigerators tend to pack components more tightly than French door or top-freezer models, and this evaporator fan often sits behind the ice maker and a dedicated fan cover in addition to the rear interior panel. Removing all of these takes more time than a simpler platform, but the fan motor itself installs the same straightforward way once you have access — a headlamp or flashlight helps considerably in the tighter space.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It includes the same motor design, fan blade, integrated thermistor, and 6-pin harness configuration as the evaporator fan motor assembly originally installed in your side-by-side refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WR51X10055 Refrigerator Defrost Heater Assembly
The XPARTCO WR51X10055 is an aftermarket replacement refrigerator defrost heater and bracket assembly compatible with a wide range of GE, Hotpoint, Kenmore, Haier, Americana, Monogram, and Café refrigerators. The defrost heater is a glass quartz tube heater mounted on a bracket below the evaporator coils in the freezer compartment. During each automatic defrost cycle, the heater energizes and melts any frost that has accumulated on the evaporator coils — maintaining unobstructed airflow through the coils so the refrigerator can cool efficiently. When the heater fails, frost accumulates on the coils unchecked, blocking airflow and causing both the freezer and fresh food sections to gradually warm up.
Rated at 120V, 725W, this single quartz tube heater assembly measures 12-1/8" L x 3-3/8" W x 2-1/8" H and includes the heater element and mounting bracket. It directly replaces WR51X10030, AP3183311, 914088, AH303781, EA303781, PS303781, SH323, and EAP303781. Often replaced together with the defrost thermostat (WR50X10068) and temperature sensor (WR55X10025) for a complete defrost system repair. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The XPARTCO WR51X10055 Refrigerator Defrost Heater Assembly fixes GE and Hotpoint refrigerators where frost is building up on the evaporator coils, the freezer is too warm, the fresh food section is warming up, or the refrigerator is running continuously without cooling properly. Single quartz tube heater, 120V / 725W. Assembly measures 12-1/8" L x 3-3/8" W x 2-1/8" H. Includes heater and bracket. Replaces WR51X10030, AP3183311, 914088, SH323, and more. Compatible with GE, Hotpoint, Kenmore, Haier, Americana, Monogram, and Café.
Common Problems This Part Fixes
Frost or ice buildup covering the evaporator coils in the freezer compartment
Freezer section warming up or not maintaining set temperature
Fresh food section warming up even though the freezer is running
Refrigerator running continuously but not cooling properly
Visible frost accumulation on the freezer back wall behind the panel
Defrost heater element visibly burned out, broken, or dark/charred at the ends
Both compartments gradually warming up after working normally for years
Replaces Part Numbers
This defrost heater assembly directly replaces the following OEM and cross-reference part numbers:
WR51X10055, WR51X10030, 914088, AGE29323, AH303781, AP3183311, EA303781, EAP303781, PD00001004, PS303781.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This defrost heater is compatible with select refrigerators from the following brands:
GE refrigerators (side-by-side, French door, top-freezer, and bottom-freezer)
Hotpoint refrigerators
Kenmore / Sears refrigerators (select GE-built models)
Haier refrigerators (select GE-platform models)
Americana refrigerators
Monogram refrigerators
Café refrigerators
Tip: When replacing the defrost heater, it is highly recommended to also replace the defrost thermostat (WR50X10068) and temperature sensor (WR55X10025) at the same time. These three parts form the defrost system and are commonly replaced together — replacing all three prevents a second disassembly if another component fails soon after.
Key Features
Single quartz tube glass heater — melts frost from the evaporator coils during each automatic defrost cycle, maintaining airflow and cooling efficiency
Rated 120V / 725W — correct electrical specifications for compatible GE refrigerators
Assembly dimensions: 12-1/8" L x 3-3/8" W x 2-1/8" H — direct fit into the evaporator coil bracket
Includes heater element and mounting bracket — complete assembly ready to install
Replaces WR51X10030 and WR51X10055 — both older and current part numbers covered
Compatible with GE, Hotpoint, Kenmore, Haier, Americana, Monogram, and Café refrigerators
Often replaced together with WR50X10068 defrost thermostat and WR55X10025 temperature sensor
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
Part Number
WR51X10055
Also Replaces
WR51X10030
Part Type
Refrigerator Defrost Heater and Bracket Assembly
Condition
Aftermarket Replacement
Heater Type
Single quartz tube glass heater
Voltage
120V AC
Wattage
725W
Dimensions
12-1/8" L x 3-3/8" W x 2-1/8" H
Includes
Heater element and mounting bracket
Often Replaced With
WR50X10068 Defrost Thermostat, WR55X10025 Temperature Sensor
Compatible Brands
GE, Hotpoint, Kenmore, Haier, Americana, Monogram, Café
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Wear Work Gloves Unplug the refrigerator before beginning. Remove all food and shelving from the freezer compartment. Remove the freezer bottom drawer and the back panel screws (typically 2 hex-head screws). Slide out the back panel to expose the evaporator coils and defrost heater assembly. If the coils are covered in frost or ice, use a hair dryer to melt the ice before removing the heater — do not chip or force the heater free while iced over, as the glass element is fragile and will break. Disconnect the heater wires from the wiring harness — note the orientation before disconnecting. Remove the 2 Phillips screws securing the heater bracket and lift the heater assembly out. Install the new WR51X10055 heater assembly in the same position, reconnect the wires, and reinstall the bracket screws. Reinstall the back panel, shelving, and food. Restore power and verify the defrost cycle operates normally. Wear work gloves throughout — the evaporator area has sharp edges. Tools needed: Phillips screwdriver, 1/4" nut driver, hair dryer (if coils are iced over), work gloves.
Frequently Asked Questions
What does the refrigerator defrost heater do?
Modern refrigerators use an automatic defrost system that periodically runs a defrost cycle — typically once or twice a day — to melt frost that accumulates on the evaporator coils during normal operation. The defrost heater is a glass quartz heating element that energizes during this cycle and melts the frost off the coils. This keeps the coils clear so air can flow freely through them to cool the refrigerator. When the heater fails, frost builds up unchecked on the coils over days or weeks — eventually blocking airflow completely and causing both compartments to warm up, even though the compressor is still running.
How do I know if my defrost heater has failed?
Remove the freezer back panel to expose the evaporator coils. If the coils are heavily coated in frost or solid ice — especially if both the freezer and refrigerator sections have been warming up — a failed defrost heater is the most likely cause. You can confirm with a multimeter: disconnect the heater and probe both wire ends. A working heater shows continuity (resistance between approximately 10–200 ohms at room temperature depending on wattage). No continuity confirms the heater element has burned out. Also visually inspect the glass tube — a burned, blackened, or broken tube is a clear sign of failure.
Should I also replace the defrost thermostat and temperature sensor?
Yes — since the freezer must be fully emptied and the back panel removed to replace the heater, it is highly recommended to also replace the defrost thermostat (WR50X10068) and temperature sensor (WR55X10025) at the same time. All three components form the defrost system and wear at similar rates. A failed thermostat or sensor can cause the heater to run too long or not at all — replacing all three in a single repair eliminates that risk and saves you from another complete freezer teardown in the near future.
My freezer is warming up but the compressor is running — is it the defrost heater?
It often is — but not always. A compressor that is running but not cooling can be caused by a failed defrost heater (frost blocking airflow), a faulty evaporator fan motor (air not circulating), a defrost thermostat or timer failure, or a sealed system problem (refrigerant leak or compressor issue). The easiest way to distinguish a defrost system failure from other causes is to open the freezer and check whether frost has built up on the back panel or coils. If yes, the defrost heater is the most likely culprit. If the coils are clear and the compressor is running, look at the evaporator fan or sealed system next.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured as a single quartz tube glass heater rated at 120V/725W to match the dimensions and performance of the original WR51X10055 defrost heater assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Choice DA32-10109Y Refrigerator Temperature Sensor – Replacement for Samsung
Product Overview
The DA32-10109Y Refrigerator Temperature Sensor is an aftermarket replacement part designed to measure and relay internal temperatures to the control board. A faulty sensor can lead to cooling problems, temperature fluctuations, or improper defrost cycles. Replacing a worn sensor with this reliable component helps restore accurate temperature readings and optimal cooling performance in your refrigerator.
8-1/4" overall length with two pin plug for freezer.
Fits Samsung SXS refrigerator models.
Replaces Part Numbers
This sensor replaces part numbers DA32-10109Y, AP4136950, PS4138703.
It is engineered to match the fit and functionality of the original Samsung sensor.
Compatible Brands
Compatible with many Samsung and Kenmore refrigerators manufactured by Samsung. Fits French door, bottom-freezer, and side-by-side models that use this temperature sensor.
Fixes the Following Issues
Refrigerator not cooling properly
Freezer too warm or too cold
Temperature reading errors
Inconsistent cooling or defrost operation
Why Buy from Parts‑O‑Matic
Affordable and dependable aftermarket part
Fast and free U.S. shipping
Easy to install – no special tools required
Trusted by appliance techs and DIYers
Choice 240597203 Refrigerator Temperature Sensor Replaces 240597220
The Choice 240597203 is an aftermarket replacement refrigerator temperature sensor compatible with a wide range of Frigidaire, Electrolux, Kenmore (253/106/795 prefix), Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, and Ikea refrigerators and household freezers. This NTC (negative temperature coefficient) thermistor continuously monitors the temperature inside the refrigerator or freezer compartment and sends resistance-based readings to the main control board, which uses this data to cycle the compressor, fans, and defrost heaters to maintain accurate temperatures. As the thermistor heats up or cools down, its electrical resistance changes predictably, allowing the control board to calculate the exact temperature in real time.
When this sensor fails or drifts out of range, the refrigerator may run too cold or too warm, cycle excessively, freeze up the evaporator, fail to maintain set temperatures, or display OP error codes. Rated 10K Ohm NTC, with a 5/16" diameter probe, 12" wire, and overall dimensions of 3-5/8"L x 5/8"W x 5/16"H (sensor probe itself measures ~1-3/16"L x 5/16" diameter). Compatible with 20-28 cubic foot North American household refrigerators in French door, side-by-side, top-freezer, and bottom-freezer configurations (post-2005 production). It directly replaces 240597203, 240597220, 240597201, 240597202, 7240597203, AP4032998, AH1765215, EA1765215, EAP1765215, EAP17647917, 1258948, 4985585, OEM21729470, PD00000590, PD00088922, PS1765215, and PS17647917. Not compatible with mini fridges, car refrigerators, commercial units, wine coolers, or ice makers. Installs in 15–20 minutes with basic hand tools.
Quick Answer
The Choice 240597203 Refrigerator Temperature Sensor fixes Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, and Ikea refrigerators that run too cold or warm, cycle excessively, freeze up the evaporator, or display OP error codes. NTC thermistor — 10K Ohm at room temperature. 5/16" probe diameter, 12" wire. Overall 3-5/8"L x 5/8"W x 5/16"H. Replaces 240597220, 240597201, 240597202, 7240597203, AP4032998, AH1765215, EA1765215, EAP1765215, EAP17647917, 1258948, 4985585, OEM21729470, PD00000590, PD00088922, PS1765215, PS17647917. For 20–28 cu ft household refrigerators built 2005 or later.
Common Problems This Part Fixes
Refrigerator running too cold or too warm — sensor not accurately reporting temperature
Inconsistent temperatures — fluctuating cooling that can't maintain set point
OP error code displayed on the control panel (open sensor circuit)
Excessive frost or ice buildup on evaporator coils from erratic defrost timing
Refrigerator running continuously without cycling off
Freezer over-freezing food or fresh food compartment freezing groceries
Food spoilage from temperature instability
Multimeter test shows 0 ohms (shorted), infinite resistance (open), or drifted resistance instead of the expected ~10K Ohms at room temperature
Replaces Part Numbers
This temperature sensor directly replaces the following OEM and cross-reference part numbers:
240597220, 240597203, 240597201, 240597202, 7240597203, 4985585, AFR15666, AP7243155, EAP17647917, OEM21729474, PD00088922, PS17647917.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This temperature sensor is compatible with select household refrigerators and freezers from the following brands (20–28 cu ft, built 2005 or later):
Frigidaire refrigerators — Gallery and Professional series, plus standard Frigidaire models (BFHS2611LM, BGHS2634KE, BGHS2634KP, BGHS2644KF, CRSH237LB, PRFG2383AF, PRFC2383AF, ERFG2393AS2, FRSS2323AS8, FFHB2740PP5A and many related models)
Frigidaire upright freezers — FFFH21F7QW, FGU19F6QWB and related models
Electrolux refrigerators — EI24RD65KS0, EI24RD65HS0, EI24RD65HS1, E24RD75KPS0 and related models
Kenmore / Sears refrigerators — 253-prefix, 106-prefix, and 795-prefix models (select Frigidaire/Electrolux-built units)
Crosley refrigerators (select Frigidaire-built models)
White-Westinghouse refrigerators (select models)
Kelvinator refrigerators (select models)
Gibson refrigerators (select models)
Tappan refrigerators (select models)
Viking refrigerators (select Frigidaire-platform models)
Ikea refrigerators (select Frigidaire-platform models)
Not compatible with: mini fridges, car refrigerators, commercial refrigerators/freezers, wine coolers, or dedicated ice makers. Verify your refrigerator was produced after 2005 and check the original part number on the fridge nameplate matches one of the cross-references listed. Contact our support team with your model number if you're unsure.
Key Features
NTC (negative temperature coefficient) thermistor — resistance changes predictably with temperature, allowing precise temperature monitoring
Rated 10K Ohms at room temperature (approximately 25°C / 77°F)
Sends real-time temperature data to the main control board to regulate compressor cycling, fan operation, and defrost timing
Sensor probe: 5/16" diameter x 1-3/16" length · Overall assembly: 3-5/8"L x 5/8"W x 5/16"H · 12" wire lead
White plastic/metal construction with glossy finish
Resolves OP error codes when caused by an open sensor circuit
Compatible with 20–28 cu ft French door, side-by-side, top-freezer, and bottom-freezer refrigerators built 2005 or later
Replaces 18+ OEM and cross-reference part numbers including 240597220, 240597201, 240597202, AP4032998, AH1765215, PS1765215, PS17647917
Compatible with Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, Ikea
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–20 minutes with basic hand tools
Product Specifications
Part Number
240597203CM
Part Type
Refrigerator Temperature Sensor (NTC Thermistor)
Condition
Aftermarket Replacement
Application
Household Refrigerators and Freezers (Frigidaire/Electrolux platform, 20–28 cu ft, 2005+)
Sensor Type
NTC (Negative Temperature Coefficient)
Resistance
10K Ohms at room temperature
Probe Dimensions
5/16" Diameter x 1-3/16" Length
Overall Dimensions
3-5/8"L x 5/8"W x 5/16"H
Wire Length
12"
Color
White
Finish
Glossy
Material
Plastic / Metal
Error Codes Resolved
OP (open sensor circuit)
Compatible Brands
Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse, Kelvinator, Gibson, Tappan, Viking, Ikea
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. Depending on your refrigerator model, the fresh-food temperature sensor is typically located behind the air tower or damper assembly on the rear interior wall of the refrigerator compartment; the freezer temperature sensor is typically located behind the rear freezer access panel near the evaporator coils. Confirm which sensor location matches your symptom and the parts diagram for your specific model before starting. Remove all shelves, drawers, and any items blocking access to the sensor location. Remove the screws holding the air tower/damper cover (fresh food side) or rear freezer access panel to expose the sensor. Photograph the sensor position, wire routing, and connector before removing. Disconnect the wire connector (gently — the connector can be fragile) and release the sensor from its mounting clip. Fully insert the new 240597203 sensor probe into the card slot (no exposure) and secure with the mounting clip. Reconnect the wire connector — plug wiring terminals tightly to avoid poor contact. Use cable ties to secure any loose wire routing as before. Reinstall the cover or panel, replace the shelves and drawers, and plug the refrigerator back in. Allow several hours for the refrigerator to return to its set temperature before reloading with food. Tools needed: Phillips screwdriver, cable ties, multimeter (for testing), work gloves.
Frequently Asked Questions
What does OP error code mean on my Frigidaire refrigerator?
The OP error code (Open) indicates the control board is detecting an open circuit on a temperature sensor input — meaning the sensor is failing to send a resistance signal, either because the sensor itself has failed open internally, the wire has broken, or the connector isn't seated. Replacing the temperature sensor typically resolves the code when the sensor itself is the cause. If the code persists after replacement, check the wire harness between the sensor and the control board for damage, and confirm the connector is fully seated. If the OP code appears alongside other symptoms like frost buildup and cooling issues that persist after sensor replacement, the defrost temperature sensor (on the Harness-Low Side, a different part number) may also need to be replaced, or the main control board may be at fault.
How do I test if the temperature sensor has failed?
Unplug the refrigerator, disconnect the sensor's wire connector, and set your multimeter to resistance mode. At room temperature (approximately 25°C / 77°F), a working NTC thermistor should read approximately 10K Ohms. If the sensor reads 0 ohms, it has shorted internally. If it reads infinite resistance (open circuit, often shown as "OL" on the multimeter), the sensor has failed open. If it reads significantly off from 10K (for example 8.4K or 5K at room temp), the sensor has drifted and is no longer providing accurate readings — replacement is recommended. Any of these results confirms the sensor needs replacement.
My refrigerator has multiple temperature sensors — which one do I replace?
Frigidaire refrigerators typically use multiple temperature sensors: one in the fresh food compartment (behind the air tower/damper), one in the freezer compartment (near the evaporator coils), and often a separate defrost temperature sensor on the Harness-Low Side. The 240597203 is used as the fresh food or freezer compartment temperature sensor. If your symptom is "fresh food too warm" or "freezer over-freezing," the fresh food sensor is the likely candidate. If your symptom is "freezer icing up despite defrost heater working," the defrost temperature sensor may be the culprit — a different part number. Check your refrigerator's parts diagram to confirm the correct sensor location for your specific symptom.
Does this sensor fit my Kenmore refrigerator?
On many Kenmore refrigerators, yes — Sears sells Kenmore-branded refrigerators that are manufactured by Frigidaire/Electrolux, Whirlpool, LG, and Samsung. The 240597203 sensor fits Kenmore refrigerators with model numbers beginning with the 253, 106, or 795 prefixes that are Frigidaire/Electrolux-built. Kenmore refrigerators built by other manufacturers (Whirlpool, LG, Samsung) use different sensors. Check the first three digits of your Kenmore model number — if it's 253, 106, or 795 and falls within the compatible model list, this is the correct part.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Frigidaire/Electrolux OEM part, but is manufactured to match the electrical specifications (10K Ohm NTC), probe dimensions (5/16" diameter x 1-3/16" length), wire length (12"), and connector configuration of the original 240597203 temperature sensor used in compatible refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
W10861732 Oven Genuine OEM Control Board
Color: White
Condition: New, Never Used, Open Box, Original Packing is Missing.
Replaces Part Numbers: W10861732, W10540194, W10565359, W10576929, W10786394, OEM18078872, PS11737999, AP6026289.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
W11236851 Refrigerator Genuine OEM Air Damper Diffuser
The W11236851 is a genuine Whirlpool OEM air damper diffuser assembly for Whirlpool refrigerators, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea models. Located inside the refrigerator behind the evaporator cover, this damper controls the flow of cold air from the freezer into the refrigerator compartment, opening and closing as needed to maintain the set temperatures in each section.
Causes of a bad damper include wear and tear of the movable parts over time, failure of the actuator motor that powers it, or damage from something accidentally blocking the damper mechanism. Symptoms of a failing damper include the refrigerator section running too cold or too warm, the freezer section running too cool or too warm, difficulty maintaining set temperatures, excessive condensation inside the appliance, or ice accumulation. It directly replaces 4814117, W11175955, AP6783936, EAP12584010, AWP43935, PD00058357, PS12584010.
Quick Answer
The W11236851 Refrigerator Genuine OEM Air Damper Diffuser fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea refrigerators where the fridge or freezer section runs too warm or too cold, temperatures are hard to maintain, or you notice excessive condensation or ice buildup. Replaces 4814117, W11175955, AP6783936, EAP12584010, AWP43935, PD00058357, PS12584010. Check that nothing is accidentally blocking the damper mechanism before assuming it has failed — food items or packaging pushed against it can cause the same symptoms as a worn or broken damper.
Common Problems This Part Fixes
Refrigerator section too cold
Refrigerator section too warm
Freezer section too cool
Freezer section too warm
Excessive condensation inside the appliance
Ice accumulation
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator air damper diffuser directly replaces the following OEM and cross-reference part numbers:
W11236851, 4814117, W11175955, AP6783936, EAP12584010, AWP43935, PD00058357, PS12584010
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This air damper diffuser is compatible with select Whirlpool refrigerators, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea refrigerators built on the Whirlpool platform.
Note: Always verify your full model number before ordering, since Whirlpool uses several different damper designs across its refrigerator lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified damper and actuator design
Controls cold airflow from the freezer into the refrigerator compartment
Resolves "too cold," "too warm," "excessive condensation," and "ice accumulation" symptoms
Located behind the evaporator cover
Direct drop-in replacement matching the original mounting and connections
Replaces 4814117, W11175955, AP6783936, EAP12584010, AWP43935, PD00058357, PS12584010
Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
W11236851
Part Type
Refrigerator Air Damper Diffuser Assembly
Condition
Genuine OEM
Brand
Whirlpool
Location
Behind the evaporator cover
Function
Controls cold airflow between the freezer and refrigerator compartments
Repair Difficulty
Moderate
Quantity
1 damper assembly
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, Ikea
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Check For Blockages First Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Before disassembling anything, check whether food items or packaging have been accidentally pushed against the damper mechanism, since this can cause the same temperature symptoms as a genuinely failed part. Locate the evaporator cover, typically in the freezer or at the back of the fresh food compartment depending on your model, and remove it to access the damper assembly. Photograph the wiring connection to the actuator motor before disconnecting anything. Disconnect the wiring harness from the old damper assembly, remove any mounting clips or fasteners, and pull it free. Install the new W11236851 in the same position, reconnect the wiring harness fully, and secure any mounting hardware. Reinstall the evaporator cover. Restore power and monitor both the refrigerator and freezer temperatures over the next 24 hours to confirm consistent, accurate cooling in both compartments. Tools needed: Phillips screwdriver (model-dependent), work gloves.
Frequently Asked Questions
My refrigerator section is too warm but the freezer is fine. Is this the part I need?
Yes, this is a common symptom of a failing air damper. Since this damper controls how much cold air moves from the freezer into the refrigerator compartment, a stuck or broken damper can leave the refrigerator section too warm even while the freezer maintains a normal temperature.
My freezer or fridge is too cold instead of too warm. Could this still be the damper?
Yes. A damper stuck in the open position can let too much cold air flow into the refrigerator compartment, making it colder than intended, while a damper stuck closed can have the opposite effect. Both too-cold and too-warm symptoms in either compartment can point to this same part.
What should I check before assuming the damper itself is broken?
Check that nothing — food packaging, containers, or shifted items — is physically blocking the damper mechanism, since accidental blocking can produce the same temperature symptoms as a genuinely worn or failed damper, without requiring a replacement part at all.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original damper and actuator design of the air damper diffuser originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
