Search results for "dishwasher gasket"

4 Pack - XPARTCO DD66-00023A Dishwasher Lower Dish Rack Roller - Compatible with select Samsung models Product Description Restore smooth operation to your dishwasher with the XPARTCO DD66-00023A Dishwasher Lower Dish Rack Roller. This replacement roller is designed as a replacement for select Samsung dishwashers, offering a cost-effective alternative to the original. It supports the lower dish rack, ensuring it glides smoothly in and out for easy loading and unloading. This part addresses issues like the rack sticking, wobbling, or falling off the rails, often caused by worn or broken rollers. Note: Includes (1) lower dish rack roller. Disconnect power before installation. Verify compatibility with your dishwasher model. Replaces part numbers: DD66-00023A, PD00002184, EAP4222532, DW0023A, AP4342187, 2002711, PS4222532. Compatibility: Compatible with select Samsung dishwasher models, including but not limited to: Samsung: DW80J3020US/AA-0000, DW80J3020US/AA-0001, DW80J3020US/AA-0002, DW80J3020US/AA-0003, DW80J3020US/AA-0004, DW80J3020US/AA-0005, DW80J3020US/AA-0006, DW80J3020US/AA-0007, DW80J3020US/AA-0008, DW80J3020US/AA-0009, DW80J3020US/AA-0010, DW80J3020US/AA-0011, DW80J3020US/AA-0012, DW80J3020US/AA-0013, DW80J3020US/AA-0014 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Samsung dishwashers. 🔧 Specifications: High-quality plastic roller with metal axle. 💪 Reliable Performance: Ensures smooth gliding of the lower dish rack. 🛠️ Easy Installation: Tool-free; typically installed in 5–10 minutes. 🛡️ Effective Fixes: Resolves sticking, wobbling, or falling rack issues. Product Specification Part Number: XPARTCO DD66-00023A Component Type: Dishwasher lower dish rack roller Material: Plastic Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dishwasher from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dishwasher running smoothly today! Add to cart now for a reliable fix!

Read more less

W10551671 Dishwasher Touchpad and Control Panel Genuine OEM Replaces Part Numbers: WPW10551671, W10551671, 4448286, W10447837, W10456292, W10551664, W10577251, W10584823, W10669887, AP6022869, PS11756206.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO WD21X10519 Dishwasher Flood Switch – Compatible with GE, Hotpoint, and RCA Dishwashers Product Description Prevent overfilling and protect your dishwasher from water damage with the XPARTCO WD21X10519 Dishwasher Flood Switch. This Flood Switch Assembly is a replacement part compatible with GE dishwashers. The dishwasher flood switch and thermistor assembly is responsible for detecting and preventing water from overflowing the dishwasher. It is located at the base of the tub and detects when water is present in the base from a leak, preventing the water inlet valve from filling further. The thermistor shuts off the water flow from the valve if the incoming water temperature is outside of the acceptable range. Replaces Part Numbers WD21X10519, 3028650, WD21X10492, WD21X20204, PD00023214, EAP8690623, AP5781465, PS8690623. Compatibility This replacement flood  switch fits select GE, Hotpoint, and RCA dishwashers. Example compatible models include (but are not limited to): GE GSD2100V65BB, GDF520PGJ2WW, Hotpoint HDA3600H35BB, and RCA RBD3300G00BB. Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to meet OEM performance and safety standards 💧 Prevents Overfilling – Accurately detects water level and stops excessive filling 💰 Budget-Friendly Alternative – Provides OEM-like reliability at a lower cost 🛠️ Quick & Easy Installation – Simple wiring connection for fast repair 🛡️ Fixes Common Issues – Solves leaking, overfilling, or dishwasher not filling problems 📐 Product Specification Part Number: WD21X10519 Component Type: Dishwasher flood Switch Material: Plastic flood housing with integrated electrical microswitch Mounting: Direct-fit installation beneath dishwasher tub Function: Monitors water level and signals control board Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, pliers (optional) ⚠️ Safety First: Always unplug the dishwasher or turn off its circuit breaker before servicing. Steps: Disconnect power to the dishwasher. Remove the toe-kick panel to access the flood  switch area. Disconnect the wiring connector from the old switch. Twist or unclip the old flood switch and remove it. Install the new XPARTCO WD21X10519 switch in the same position. Reconnect wiring, reinstall toe-kick panel, and restore power. Run a quick fill test to confirm proper operation. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Protect your dishwasher from overfilling — Add to Cart Now for a reliable, cost-effective repair!

Read more less

XPARTCO WD01X29878 Dishwasher Door Latch – Compatible with GE Dishwashers Product Description Restore secure door closing and proper dishwasher operation with the XPARTCO WD01X29878 Dishwasher Door Latch. This high-quality aftermarket replacement ensures the dishwasher door locks firmly during wash cycles and signals the control board that it is safe to operate. A faulty door latch can cause the dishwasher not to start, stop mid-cycle, or display door-related error codes. Replacing it with this reliable XPARTCO latch helps restore safe and dependable washing performance. XPARTCO offers cost-effective aftermarket appliance parts engineered to match original fit and function. Replaces Part Numbers WD01X29878, WD01X27701, 265D1214G004, EG-380944, PD00072017, FIX16659468, 4979622, AP7176296, PS16659468. Compatibility This replacement dishwasher door latch fits select GE dishwashers. Common compatible models include (but are not limited to): GE GDT655SSJSS GE GDF630PGMWW Always verify your dishwasher’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM fit and electrical function 🔒 Secure Door Locking – Ensures dishwasher runs only when door is properly closed ⚙️ Fixes Start Issues – Resolves no-start or cycle interruption problems 🧩 Direct-Fit Design – Installs without modification 💰 Cost-Effective Repair – Affordable alternative to OEM door latches 📐 Product Specification Part Number: WD01X29878 Component Type: Dishwasher Door Latch Assembly Function: Door locking and safety interlock Mounting: Screw-mounted, plug-in harness Application: Dishwasher door safety system Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver ⚠️ Safety First: Unplug the dishwasher or turn off the breaker before servicing to avoid electrical shock. Basic Steps: Disconnect dishwasher power. Remove the inner door panel screws. Locate and disconnect the old door latch assembly. Remove mounting screws and take out the latch. Install the new XPARTCO WD01X29878 latch. Reconnect wiring and reassemble the door panel. Restore power and test operation. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Aftermarket Appliance Parts 🔄 30-Day Return Policy Restore secure dishwasher operation and prevent door-related errors — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

00622058 Dishwasher Genuine OEM Water Valve  Fits Specific Bosch Dishwasher Models Description: This dishwasher Water Inlet Valve is a Genuine OEM part for specific Bosch dishwasher models. This component is responsible for controlling the flow of water into the dishwasher. It operates via electrical signals from the dishwasher's control board, opening to allow water to enter during the fill cycle and closing to prevent water from entering during other cycles. ✅ Key Features: Genuine OEM Part for Bosch #00622058 120V, 60Hz single solenoid valve Includes mounting bracket and hose connection port Durable thermoplastic construction 🔁 Replaces Part Numbers: 00622058, 1999956, 622058, AH3491417, AP4927070, EA3491417, PS3491417, PS8728724. 🔧 Fixes These Common Symptoms: Dishwasher not filling with water Low or slow water flow Water inlet error codes Humming or clicking without water intake Leaking around the valve area 🧰 Compatible With: ✔️ Bosch✔️ Thermador✔️ Gaggenau✔️ Siemens(Check your model number or contact us for assistance.) ✅ Affordable aftermarket solution ✅ Always Fast and Free U.S. shipping ✅ Backed by helpful support and easy returns ✅ Trusted by DIYers and appliance techs 🛒 Restore your dishwasher’s performance — order the 00622058 water inlet valve today from Parts-O-Matic.com, and get it delivered fast and free.

Read more less

XPARTCO 8269145 Dishwasher Mounting Bracket (Pack of 2) – Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana Dishwashers Product Description Securely mount your dishwasher with the XPARTCO 8269145 Dishwasher Mounting Bracket (Pack of 2). These brackets are designed to fasten your dishwasher to the countertop, cabinet, or side panel to prevent shifting during use. Perfect for installations where stability is critical, this kit provides a reliable and cost-effective replacement solution. Replaces Part Numbers WP8269145, 8269145, PD00002628, EAP11745496, AP6012289, PS11745496, WP8269145VP. Compatibility These mounting brackets are compatible with select Whirlpool, Kenmore, KitchenAid, Maytag, and Amana dishwashers. Example compatible models include (but are not limited to): Whirlpool WDF520PADM7, KitchenAid KUDS30IXBL8, Kenmore 665.13293K114. Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Broad Compatibility – Works with Whirlpool, Kenmore, KitchenAid, Maytag, and Amana dishwashers 🔧 Secure Mounting – Keeps dishwasher firmly attached to cabinets or countertop 💰 Cost-Effective Alternative – OEM-equivalent quality at a lower price 🛠️ Easy Installation – Installs in minutes with standard tools 📦 Value Pack – Includes 2 brackets for a complete repair or installation 📐 Product Specification Part Number: 8269145 Component Type: Dishwasher Mounting Bracket (Pack of 2) Material: Heavy-duty metal construction Mounting: Attaches to countertop, side cabinet, or panel Operating Conditions: Standard dishwasher installations Compliance: OEM-equivalent performance standards 🛠️ Installation Notes Tools Needed: Phillips screwdriver, drill (if required) ⚠️ Safety First: Always disconnect power before working on your dishwasher to avoid electrical shock. Steps: Unplug dishwasher and turn off water supply. Open dishwasher door and locate mounting positions. Position bracket at the top or side of dishwasher frame. Secure bracket with screws to the cabinet or countertop. Reconnect power, turn on water, and test installation. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Secure your dishwasher properly with this budget-friendly fix — Add to Cart Now for fast, reliable installation!

Read more less

W11434044 Genuine OEM Whirlpool Dishwasher Water Inlet Valve The W11434044 is a Genuine OEM Whirlpool replacement dishwasher water inlet valve assembly compatible with a wide range of Whirlpool, Maytag, KitchenAid, JennAir, Kenmore, Amana, Roper, Admiral, Estate, Crosley, Inglis, Ikea, Hardwick, Magic Chef, Norge, Modern Maid, and Caloric dishwashers. The water inlet valve is mounted at the base of the dishwasher and connects to the household cold water supply line. When the control board calls for water during the fill cycle, the valve's internal solenoid opens, allowing water to flow into the tub. The valve closes the instant the control board cuts power, stopping flow precisely when the correct water level is reached. Without a properly functioning inlet valve, the dishwasher can't get water into the tub — meaning it can't wash, rinse, or complete a cycle. Rated 120V AC, 50/60Hz, 6/5W. Approximate dimensions: 2.9" H x 2.3" W with a 0.9" threaded orifice for the water supply connection. The package includes the water inlet valve, water outlet pipe (inlet hose), and two hose clamps — everything needed for the connection between the valve and the dishwasher's water divider. As a Genuine OEM part manufactured by Whirlpool to factory specifications, the W11434044 directly replaces W11187724, W11025972, W11025970, AWP44732, AP6987233, and PS16217908. Important: the water inlet connection uses plastic threads, which are easily damaged by over-tightening or cross-threading — hand-tighten the water line carefully during installation. Installs in 30–45 minutes with basic hand tools. Quick Answer The W11434044 Genuine OEM Whirlpool Dishwasher Water Inlet Valve fixes Whirlpool, Maytag, KitchenAid, JennAir, and Kenmore dishwashers that aren't filling with water, fill slowly, aren't washing properly, drain immediately after filling, or leak at the valve. 120V AC, 50/60Hz, 6/5W. Approximately 2.9"H x 2.3"W. Genuine OEM. Includes inlet valve, water outlet pipe, and 2 hose clamps. Replaces W11187724, W11025972, W11025970, AWP44732, AP6987233, PS16217908. Compatible with WDT750SAKZ, KDTM404KPS, MDB4949SKZ, WDTA50SAKZ, KDTE204KPS, WDPA70SAMZ, WDPS7024, WDT740SAL, WDT751SAP, WDT970SAK series and related models. Plastic-thread inlet connection — hand-tighten carefully to avoid stripping. Common Problems This Part Fixes Dishwasher not filling with water — valve solenoid not opening when commanded Dishwasher filling too slowly — valve partially clogged with sediment or weak solenoid Dishes not being washed properly due to insufficient water fill Dishwasher fills but doesn't reach normal water level Water leaking from the valve body or its connections Dishwasher continuously running water even when the cycle should be complete — valve stuck open Dishwasher won't advance past the fill phase due to insufficient water detection Excessive cycle times as the dishwasher tries to fill from a partially clogged valve Multimeter test on the valve solenoid shows no continuity Replaces Part Numbers This dishwasher water inlet valve directly replaces the following OEM and cross-reference part numbers: W11434044, W11025970, W11025972, W11187724, AP6987233, AWP44732, EAP16217908, PD00064823, PS16217908. W11434044 is the current OEM production part superseding W11187724, W11025972, and W11025970. Contact our support team with your model number if you need confirmation before ordering. Compatibility This water inlet valve is compatible with select dishwashers from the following brands: Whirlpool dishwashers — WDPA70SAMZ0, WDPA70SAMZ2, WDPA70SAMZ3, WDPS7024RV0, WDPS7024RZ0 series Whirlpool dishwashers — WDT740SALB2, WDT740SALB3, WDT740SALW2, WDT740SALW3, WDT740SALZ3 series Whirlpool dishwashers — WDT750SAKB0/B2/B3, WDT750SAKV0/V2/V3, WDT750SAKW0/W2/W3, WDT750SAKZ0/Z2/Z3 series Whirlpool dishwashers — WDT751SAPZ0, WDT751SAPZ1 series Whirlpool dishwashers — WDT970SAKV2, WDT970SAKV3, WDT970SAKZ2, WDT970SAKZ3 series Whirlpool dishwashers — WDTA50SAKB0/B2/B3, WDTA50SAKT0/T2/T3, WDTA50SAKV0/V2/V3, WDTA50SAKZ0/Z2/Z3 series KitchenAid dishwashers — KDTM404KPS, KDTE204KPS and related models Maytag dishwashers — MDB4949SKZ and related models JennAir, Kenmore, Amana, Roper, Admiral, Estate, Crosley, Inglis, Ikea, Hardwick, Magic Chef, Norge, Modern Maid, Caloric — select Whirlpool-built dishwashers Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Genuine OEM part manufactured by Whirlpool to factory specifications — guaranteed fit and performance Controls the flow of water into the dishwasher during fill cycles Solenoid-actuated — opens precisely when the control board calls for water and closes the moment the call is dropped 120V AC, 50/60Hz, 6/5W — correct electrical specifications for compatible Whirlpool-platform dishwashers Dimensions: approximately 2.9" H x 2.3" W · 0.9" threaded orifice diameter Includes water inlet valve, water outlet pipe (inlet hose), and 2 hose clamps for a complete connection set Current OEM production part — supersedes W11187724, W11025972, and W11025970 Also replaces AWP44732, AP6987233, and PS16217908 Compatible with Whirlpool WDT740SAL, WDT750SAK, WDT751SAP, WDT970SAK, WDTA50SAK, WDPA70SAMZ, WDPS7024 series and select KitchenAid, JennAir, Kenmore, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, Ikea, and related Whirlpool-built dishwashers DIY repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number W11434044 Supersedes W11187724, W11025972, W11025970 Part Type Dishwasher Water Inlet Valve Assembly Condition Genuine OEM Application Dishwashers (Whirlpool platform) Voltage 120V AC Frequency 50/60 Hz Wattage 6/5W Dimensions Approximately 2.9" H x 2.3" W Threaded Orifice Diameter 0.9" Inlet Thread Material Plastic (hand-tighten carefully to avoid stripping) Body Material ABS Plastic / Stainless Steel Includes 1x Inlet Valve, 1x Water Outlet Pipe, 2x Hose Clamps Compatible Brands Whirlpool, Maytag, KitchenAid, JennAir, Kenmore, Amana, Roper, Admiral, Estate, Crosley, Inglis, Ikea, Hardwick, Magic Chef, Norge, Modern Maid, Caloric Installation Notes ⚠️ Unplug Dishwasher and Shut Off Water Supply Before Starting — Wear Work Gloves — DON'T OVER-TIGHTEN PLASTIC THREADS Disconnect power at the breaker and shut off the household water supply at the shutoff valve under the sink before beginning. Wear work gloves and safety glasses to protect your hands and eyes. Have towels ready — residual water remains in the supply line and will spill when disconnected. Critical: the W11434044's water supply connection uses plastic threads. Multiple installers have reported stripping the plastic threads by over-tightening or cross-threading the water line during installation — always hand-tighten the fitting carefully and align the threads squarely before tightening. If your dishwasher is installed under a counter, working through the lower access panel is possible but tight — many installers find it easier to pull the dishwasher partially out from the cabinet, or lay it on its side, to reach the inlet connection cleanly (this also lets you use a 90-degree hose fitting without cross-threading). Remove the lower access panel (typically 2 screws) at the front bottom of the dishwasher. Locate the water inlet valve. Photograph the wire harness and hose connections before disconnecting anything. Disconnect the household water supply line from the valve. Squeeze the hose clamps with pliers and slide them back to release the outlet hose from the valve, then disconnect the wire harness plug. Remove the mounting screws holding the valve in place. Install the new W11434044 valve, secure the mounting hardware, and reconnect the outlet hose and hose clamps. Push the electrical connector's fixing plate firmly into place before connecting the wire harness plug — this prevents the connector from falling out during operation. Reconnect the household water supply — hand-tighten the fitting carefully to avoid stripping the plastic threads. Restore water and power. Run a test cycle and check for leaks at all connections. Tools needed: Phillips screwdriver, adjustable wrench (used lightly on plastic threads only!), channel-lock pliers, work gloves, safety glasses. Frequently Asked Questions My dishwasher isn't filling with water — is the inlet valve the problem? Very likely, yes — that's the most common symptom of a failed dishwasher water inlet valve. Before replacing, do a few quick checks: 1) confirm the household water supply to the dishwasher is turned on at the shutoff valve; 2) check the household water pressure at a nearby fixture (a nearby faucet) to make sure your home has normal pressure; 3) inspect the inlet screen on the valve for sediment buildup — a clogged screen can mimic a failed valve. If the supply is good and the screen is clean but the dishwasher still won't fill, the W11434044 valve solenoid has likely failed and replacing it will resolve the issue. You can also test the solenoid with a multimeter — no continuity means the solenoid has burned out. What is the difference between W11434044 and W11025970/W11025972/W11187724? These are the same water inlet valve across production revisions. W11025970 was the original OEM part number, W11025972 and W11187724 were mid-generation revisions, and W11434044 is the current OEM production version. All are physically and functionally interchangeable — if your dishwasher's parts diagram or the part on your appliance shows any of these numbers, the W11434044 is the correct current replacement, and this listing covers all of them. Why is over-tightening the water line connection such a common issue? The water supply inlet on the W11434044 has plastic threads to reduce cost and simplify manufacturing — but plastic threads are much less forgiving than brass or metal fittings. Cross-threading (starting the fitting at an angle instead of straight-in) or applying too much torque with a wrench will strip the plastic threads or split the fitting. Always align the water line fitting carefully by hand first, get several turns of engagement before applying any tool, and use only enough torque to snug the connection (typically hand-tight plus a very light quarter-turn with a wrench). If the threads are already stripped, the valve or a replacement plastic fitting will need to be ordered — the connection can't be repaired. Should I lay the dishwasher on its side for this repair? If you're finding it difficult to reach the water inlet connection cleanly through the lower access panel — which is a common complaint from installers — laying the dishwasher on its side (or pulling it partially out from the cabinet) makes the connection much easier to work with. This is especially helpful if your water supply line uses a 90-degree hose fitting that needs a straight approach for correct thread engagement. Before laying the dishwasher down, disconnect all connections and drain any residual water from the tub to avoid spills. Note that if the door has been damaged or bent, laying the unit on its side can worsen the damage — inspect first. Is this a Genuine OEM or aftermarket part? This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same water inlet valve installed in compatible Whirlpool, Maytag, KitchenAid, JennAir, Kenmore, Amana, and related Whirlpool-built dishwashers from the factory — guaranteed fit, materials, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine Frigidaire OEM Part 5304533992 Dishwasher Control Panel Housing Console Assembly Genuine OEM Frigidaire console housing/overlay assembly for select Frigidaire dishwashers. No electronics included. Product Overview The Frigidaire 5304533992 Dishwasher Console Assembly is the exterior control-panel housing and overlay used on select Frigidaire dishwashers. It provides the finished front console surface and secure mounting location for the user-interface components. This is a Genuine Frigidaire OEM part manufactured for exact fit on compatible models. Quick Answer 5304533992 is the genuine OEM dishwasher console housing/overlay assembly that replaces 5304532797. This part does NOT include the electronic user-control/display board. On compatible models, the separate switch/display assembly is part 5304532245. Common Problems This Part May Fix Control panel housing is cracked or broken Console is warped or will not mount securely Button/overlay area is physically damaged Display or switch board will not stay properly mounted because the housing is damaged Cosmetic damage to the front control console Replaces and Cross-References 5304533992, 5304532797, AP7204637, EAP16763567, FIX16763567, OEM21613920, PS16763567, AFR20138, PD00090155 Cross-reference numbers identify the same console housing assembly through manufacturer and parts-catalog systems. Compatibility Confirmed for select Frigidaire 24-inch dishwashers, including: GDPH4515AD0A GDPH4515AD1B GDPH4515AF0A GDPH4515AF1B GDPP4515AF0A GDPP4515AF1B Important: Confirm the complete dishwasher model number before ordering. Similar-looking control consoles can differ in overlay, mounting points, and electronics compatibility. Key Features Genuine Frigidaire OEM replacement part Console housing with control-panel overlay Replaces 5304532797 Restores secure mounting for the control interface Factory-fit appearance for compatible Frigidaire dishwashers No electronic control board included Product Specifications Manufacturer Part Number 5304533992 Brand Frigidaire Part Type Dishwasher Console / Control Panel Housing Assembly Condition New Part Quality Genuine OEM Electronics Included No Replaces 5304532797 Compatible Appliance Dishwasher Quantity 1 Console Assembly Important — No Electronics Included This listing is for the console housing/overlay assembly only. It does not include the user-control/display board, main control board, wiring harness, or other electronic components unless specifically shown and stated. For models using this console, the separate tactile switch/user-interface assembly is commonly part 5304532245. Diagnose the dishwasher before ordering: a non-responsive display or buttons may be caused by electronics rather than the plastic console housing. Installation Notes Disconnect dishwasher power at the breaker before service. Open the door and remove the fasteners required to access the console area. Photograph connector positions before disconnecting any electronic components. Transfer the existing user-interface/display components into the new console housing as required by the service procedure. Confirm all tabs, screws, seals, and connectors are properly seated. Reassemble the door before restoring electrical power. Frequently Asked Questions Does this include the electronic control board? No. 5304533992 is the console housing/overlay assembly. Electronic boards are separate parts. Does this replace 5304532797? Yes. 5304533992 is the current replacement for 5304532797. Is this Genuine OEM? Yes. This is a Genuine Frigidaire OEM replacement part. Will it fit every Frigidaire dishwasher? No. Verify the complete model number before ordering. Shop With Confidence Genuine OEM replacement part for select Frigidaire dishwashers. Verify your full model number and confirm whether your repair requires the console housing, user-interface board, or both. Genuine Frigidaire OEMNo Electronics IncludedCompatibility SupportFast U.S. Shipping

Read more less

A00126401 Genuine OEM Frigidaire Dishwasher Drain Pump Motor The A00126401 is a genuine Frigidaire OEM drain pump motor assembly for Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, and Kenmore dishwashers. At the end of each wash cycle, this pump is what actually pushes the used wash water out of the tub and through the drain hose, clearing the way for the next fill. An internal impeller spins to create that flow, drawing water in and forcing it out through the drain line. Rated 120V, 60Hz, 35W, 0.8A, 3600RPM, with 1/4" male terminals, this assembly includes the pump motor, impeller, and seal. Common causes of failure include clogs from food particles or debris interfering with the impeller, worn or damaged impeller blades, and electrical failure of the motor itself. A failing drain pump typically shows up as water not draining from the dishwasher, water pooling at the bottom of the tub after a cycle, a grinding or humming noise from the pump area, or the dishwasher refusing to start a new cycle because it detects standing water left over from the last one. It directly replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, and EAP2363535. Quick Answer The A00126401 Genuine OEM Frigidaire Dishwasher Drain Pump Motor fixes Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, and Kenmore dishwashers that won't drain, pool water at the bottom of the tub, make grinding or humming noises, or won't start a new cycle due to leftover water. 120V, 60Hz, 35W, 0.8A, 3600RPM. Replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, EAP2363535. Before replacing the pump, check the drain hose and sump screen for a simple clog — one customer replaced the pump, still had no drainage, and found a clogged drain hose was the actual cause. Common Problems This Part Fixes Dishwasher won't drain at the end of the cycle Water pooling at the bottom of the tub after a completed cycle Grinding or humming noise coming from the pump area Dishwasher won't start a new cycle because it detects leftover water from the previous one Dishes not getting properly cleaned due to poor water circulation Pump running but producing little or no actual drainage Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dishwasher drain pump motor directly replaces the following OEM and cross-reference part numbers: A00126401, 154736201, 3015405, 5304492415, PD00000922, EAP2363535, AFR20557, AP5690431, PS8689824 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drain pump motor is compatible with select Frigidaire dishwashers, and also fits select Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, and Kenmore/Sears dishwashers built on the same platform. Note: This assembly includes the pump motor, impeller, and seal. Whether a check valve flapper is included can vary by supplier batch — inspect your old pump's flapper condition before assuming one is included, and contact our support team if you need to confirm. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine Frigidaire OEM part — factory-specified motor speed and impeller design Pumps water out of the tub and through the drain hose at the end of each cycle Resolves "won't drain," "water pooling," "grinding or humming noise," and "won't start due to leftover water" symptoms caused by pump failure Includes pump motor, impeller, and seal Rated 120V, 60Hz, 35W, 0.8A, 3600RPM 1/4" male terminals for a direct plug-in electrical fit Direct drop-in replacement — no modification required Replaces AP5690431, 154736201, 3015405, 5304492415, PS8689824, DW26401, PD00000922, and EAP2363535 Compatible with Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, and Kenmore dishwashers Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number A00126401 Part Type Dishwasher Drain Pump Motor Assembly Condition Genuine OEM Brand Frigidaire Voltage 120V Frequency 60 Hz Wattage 35 W Amperage 0.8 A Motor Speed 3600 RPM Terminals 1/4" male Kit Contents Pump motor, impeller, seal Dimensions Approx. 3-1/4"L x 2-1/2"W x 3-3/4"H Color White / Green Repair Difficulty Easy to Moderate — under an hour Quantity 1 drain pump motor assembly Compatible Brands Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Westinghouse, Tappan, Ikea, Kenmore Installation Notes ⚠️ Unplug Dishwasher Before Starting — Rule Out A Simple Clog First Before replacing the pump, check the drain hose and the sump screen at the bottom of the tub for a clog — food debris and buildup in the hose can produce identical "won't drain" symptoms to a failed pump, and clearing a clog costs nothing but a few minutes. One customer replaced the pump entirely, still had no drainage, and only afterward discovered the actual cause was a clogged drain hose; disconnecting and running a cycle without the hose attached can help confirm whether the pump itself is pushing water. Once you've confirmed the pump needs replacing, disconnect power at the outlet or shut off the circuit breaker, and pull the dishwasher out from under the counter for access to the underside — removing the two screws securing it to the counter first. Have a drain pan or towels ready for residual water. Photograph the wiring and hose connections before disconnecting anything. Disconnect the two wire connectors from the old pump, remove the three screws securing it in place, and disconnect the hose connections, then pull the old pump free. Install the new A00126401 in the same position, reconnect the hose connections, and reconnect the two wire connectors. Secure the pump with its three mounting screws. Slide the dishwasher back into place and secure it to the counter, restore power, and run a full test cycle to confirm normal draining with no leaks or unusual noise. Tools needed: Phillips screwdriver, flat-blade screwdriver, needle-nose pliers, drain pan, work gloves. Frequently Asked Questions My dishwasher won't drain. How do I know if it's actually the pump and not something simpler? Check the drain hose and the sump screen at the bottom of the tub for a clog first — this is a genuinely common cause of "won't drain" symptoms and costs nothing to rule out. If the hose and screen are clear and the pump still won't run, test the pump motor with a multimeter for continuity. If there's no continuity, or the pump is getting power but still won't run, replacement is the correct fix. I already replaced the pump and it's still not draining. What should I check next? This has happened to real customers, and the cause was ultimately a clogged drain hose rather than the pump itself. If replacing the pump didn't solve the drainage problem, disconnect the drain hose and run a test cycle to see whether water is being pushed out at all — if it is, the hose downstream is the likely culprit and worth snaking out or replacing. Does this kit include the check valve flapper? This varies by supplier batch — this assembly reliably includes the pump motor, impeller, and seal, but flapper inclusion isn't consistent across all sources. Inspect your old pump's flapper for wear or damage before installation, and contact our support team if you need to confirm whether a flapper is included with your specific order. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original motor speed, impeller design, and terminal configuration of the drain pump originally installed in your dishwasher. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

WPW10481149 Dishwasher Touchpad and Control Panel Fits Specific KitchenAid Dishwasher Models Color: White   Replaces Part Numbers: WPW10481149, W10356933, W10481149, AP6022134, PS11755463.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

8558953 Dishwasher Touchpad and Control Panel Genuine OEM Fits Specific Kenmore Dishwasher Models Replaces Part Numbers: WP8558953, 8558953, 1066185, 8558928, 8563373, AP6013229, PS11746451.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

W11665769 Dishwasher Sump Pump and Motor Pump and Motor Assembly Replaces Part Numbers: W11665769, W11085683, W10917110, W11164469, AP7212556, PS16875975. Description: This dishwasher pump and motor assembly is compatible with specific Whirlpool, Maytag, Kenmore dishwasher models. It is supplied directly by the original manufacturer to ensure that it fits perfectly with your model. The pump and motor are responsible for moving water throughout the dishwasher during the wash cycle. The pump draws water from the tub and pumps it through various channels, such as the detergent dispenser, spray arms, and drain hose. The motor provides the power necessary to drive the circulation pump, causing the pump to rotate and circulate water. If the assembly is faulty, you will notice difficulties starting or filling the dishwasher, poor cleaning performance, incomplete cycles, and water leaks.

Read more less