8547168 Dryer Drum Belt - Compatible with Whirlpool, Maytag, Kenmore replaces WP8547168
Product Description
Restore your dryer’s performance with the 8547168 replaces WP8547168 Dryer Drum Belt. This replacement dryer drive belt is designed as a replacement for select Whirlpool, Maytag, Kenmore, KitchenAid, and other compatible dryers, offering a cost-effective alternative to the original. It connects the motor to the drum, enabling smooth rotation to tumble clothes during the drying cycle. This part addresses issues like the drum not spinning, unusual noises (e.g., squeaking or thumping), or the dryer stopping mid-cycle, often caused by a worn, stretched, or broken belt.
Note: Includes (1) 4-rib dryer drum belt. Disconnect power before installation. Verify compatibility with your dryer model.
Replaces part numbers: WP8547168, 8547168, 1180091, LB7168, 935H4, WP8547168VP, PD00002997, EAP11746376, AP6013154, PS11746376.
Compatibility:
Compatible with select dryer models, including but not limited to:
Whirlpool: WED6200SW0, WED6200SW1, WED6400SB0, WED6400SW0, WED6400SW1, WGD6200SW0, WGD6200SW1, WGD6400SB0, WGD6400SW0, WGD6400SW1, WGD6600VU0, YWED6200SW0, YWED6400SW0
Maytag: MGD6300TQ0, MGD6300TQ1
Kenmore: 110.67032600, 110.67042600, 110.67852600
KitchenAid, Amana, Jenn-Air, Roper, Estate, Admiral, Magic Chef: Various models (verify with model number)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn-Air, Roper, Estate, Admiral, and Magic Chef dryers.
🔧 Specifications: 4-rib belt, rubber construction, approximately 93.5".
💪 Reliable Performance: Ensures smooth drum rotation for consistent drying.
🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 20–30 minutes.
🛡️ Effective Fixes: Resolves drum not spinning, squeaking noises, or mid-cycle stopping.
Product Specification
Part Number: 8547168
Component Type: Dryer drum belt
Material: Rubber
Dimensions: Approximately 93.5"
Compliance: Prop 65 warning for California.
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running smoothly today!
Add to cart now for a reliable fix!
DC97-16782A Dryer Drum Roller - Compatible with Samsung Dryers
Product Description
Ensure smooth and quiet dryer operation with the Replacement DC97-16782A Dryer Drum Roller. This high-quality replacement drum support roller, designed for select Samsung and Kenmore dryers, supports the dryer drum for stable rotation during drying cycles. Made of durable plastic, rubber, and metal with a self-lubricating bushing and upgraded ball bearing, it reduces noise and wear. It fixes issues like loud squeaking or rumbling noises, drum not tumbling smoothly, or marks on clothes due to misalignment. Note: Includes one roller, shaft, and two tri-rings; each dryer uses four rollers, so replace in sets (front or rear pairs). Inspect the drum, belt (e.g., 6602-001655), and idler pulley (e.g., DC93-00634A) for wear. Clean lint from the drum and cabinet to prevent overheating.
Replaces part numbers: DC97-16782A, DC97-16782C, DC97-16782D, 2027851, DC97-07523A, DC97-07523B, PS4221885, WPW10177428, AP6016361, W10177428, 35001136, DC97-07523A, AP5325135, PS11749648, PD00002021.
Compatibility:
Compatible with models including but not limited to:
Samsung: DV42H5000EW/A3, DV42H5200EP/A3, DV45H7000EW/A2, DV48H7400EW/A2, DV40J3000EW/A2, DV50K8600EV/A3, DV52J8700EP/A2, DVE60M9900V/A3, DV419AEW/XAA, DV448AGE/XAA, DV316LEW/XAA
Kenmore: 402.89032010, 402.99032010, 402.89032011, 402.89032012
Verify your model number or contact Parts-O-Matic support for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung dryer models.
🔥 Specifications: Drum roller assembly, ~3-1/4" diameter x 1-1/8" width, blue/black plastic and rubber wheel, metal shaft, self-lubricating bushing with ball bearing, includes one roller, one shaft, and two tri-rings, dimensions ~3"L x 2-1/2"W x 3"H.
💰 Cost-Effective Alternative: Replacement roller offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires a putty knife, Phillips screwdriver, flat-blade screwdriver, work gloves, and optional second person; typically installed in 30–60 minutes.
🛡️ Reliable Fixes: Resolves loud rumbling or squeaking noises, drum not tumbling, or marks on clothes.
Safety First: Unplug the dryer from the power source and, for gas dryers, shut off the gas valve before installation.
XPARTCO Y312959 Dryer Drum Belt Replaces WPY312959
The XPARTCO Y312959 is an aftermarket replacement dryer drum drive belt compatible with a wide range of Maytag, Jenn-Air, Whirlpool, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers — including the long-running vintage Maytag DE and DG halo-of-heat series. The drum belt is a critical component that connects the drive motor to the drum. It wraps all the way around the drum's circumference, passes around a spring-loaded idler (tension) pulley, and connects to the drive motor pulley. When the motor runs, it drives the belt, which rotates the drum to tumble clothes for even drying. Over time, drive belts fail from normal wear, cracking or fraying from age and repeated flexing, exposure to heat and lint buildup, stretching that causes slipping, or sudden breakage.
Constructed from durable black rubber. Dimensions: 100" long x 3/8" (5/16") wide, with 5 ribs and 4 grooves. Includes instructions. It directly replaces Y312959, WPY312959, WPY312959VP, 312959, 3-12959, 3-14774, 314774, 1000H5, 8195-959, LB234, P46-150, P46-151, 1246110, 6-3129590, AP6024192, EAP11757542, PD00028571, and PS11757542. Important: install the belt with the grooved side against the motor pulley and the smooth side against the drum. Because the belt is symmetrical, it can be installed with either end facing out. Often replaced together with the idler pulley (WP6-3037050) and drum support roller kit (12001541 / 303373K), sold separately. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The XPARTCO Y312959 Dryer Drum Belt fixes Maytag, Jenn-Air, Whirlpool, Amana, and Kenmore dryers where the drum won't turn (motor runs but drum stays still), the drum spins slowly, or the dryer makes loud squealing/thumping noises. 100"L x 3/8"W. 5 ribs, 4 grooves. Black rubber. Replaces WPY312959, WPY312959VP, 312959, 3-12959, 3-14774, 314774, 1000H5, 8195-959, LB234, P46-150, P46-151, 1246110, 6-3129590, AP6024192, EAP11757542, PS11757542. Install grooved side against the motor pulley, smooth side against the drum. Often paired with idler pulley WP6-3037050 and drum roller kit 12001541.
Common Problems This Part Fixes
Dryer drum doesn't turn — motor runs but drum stays still (belt snapped)
Dryer drum rotates slowly or intermittently — belt worn or slipping
Loud squealing, squeaking, or thumping noises during operation — belt cracked, glazed, or misaligned
Clothes taking much longer than normal to dry — drum not tumbling clothes effectively
Visible cracks, fraying, or glazing on the belt surface
Belt broken completely — often heard as a loud snap during operation
Drum spins freely by hand with no resistance — a clear sign the belt has snapped
Belt worn thin or stretched after decades of use on a vintage Maytag dryer
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer drum belt directly replaces the following OEM and cross-reference part numbers:
Y312959, WPY312959, 1000H5, 1246110, 3-12959, 3-14774, 312959, 314774, 8195-959, P46-150, P46-151, 6 3129590, AP6024192, AWP51437, EAP11757542, PD00028571, PS11757542
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This dryer drum belt is compatible with select dryers from the following brands:
Maytag electric dryers — DE106, DE107, DE110, DE180, DE18CA/CM/CS/CT, DE19CA/CD/CS/CT, DE210, DE212, DE21CA/CM/CS/CT, DE22CA/CS/CT, DE23CD, DE24CA/CM/CS/CT, DE25CS, DE26CA/CD/CS/CT, DE27CA/CS/CT, DE303, DE308, DE309, DE312, DE313, DE382, DE4000, DE408-DE9900 series and many more
Maytag gas dryers — DG106, DG107, DG110, DG18CA/CM/CS/CT, DG19CA/CD/CS/CT, DG210, DG212, DG21CA/CM/CS/CT, DG22CA/CS and related DG-series models
Maytag dryers — LDE and LDG series (LDE7304ACE, LDE8406ACE/ACM/ADE, LDE8410, LDG8424AAE, LDG9304AAM and related)
Jenn-Air dryers (select models)
Whirlpool dryers (select Whirlpool-built models)
Amana, Magic Chef, Admiral, Norge, Roper dryers (select Whirlpool/Maytag-built models)
Kenmore / Sears dryers (select Whirlpool/Maytag-built models)
Note: When you replace the drum belt, this is also the ideal time to inspect the idler (tension) pulley (WP6-3037050) and the drum support rollers (kit 12001541 / 303373K) — they wear from the same friction cycles as the belt, and if they're rough, seized, or noisy, the new belt will wear out prematurely. Before replacing the belt due to noise, check the drum support rollers and idler pulley and replace if you see signs of wear. Always verify your dryer model number before ordering.
Key Features
Dryer drum drive belt — connects the motor pulley to the drum to enable tumbling during drying cycles
Resolves "drum won't turn," "loud squealing noise," and "long dry times" symptoms when caused by belt failure
Durable black rubber construction — engineered to withstand thousands of hours of high-temperature, high-friction operation
Dimensions: 100" long x 3/8" (5/16") wide with 5 ribs and 4 grooves
Install with the grooved side against the motor pulley and the smooth side against the drum
Symmetrical design — can be installed with either end facing out
Includes instructions
Replaces WPY312959, WPY312959VP, 312959, 3-12959, 3-14774, 314774, 1000H5, 8195-959, LB234, P46-150, P46-151, 1246110, 6-3129590, AP6024192, EAP11757542, and PS11757542
Compatible with vintage Maytag DE/DG series, LDE/LDG series, plus Jenn-Air, Whirlpool, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers
Often replaced together with the idler pulley (WP6-3037050) and drum support roller kit (12001541 / 303373K), sold separately
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
Y312959
OEM Part Number
WPY312959
Part Type
Dryer Drum Drive Belt
Condition
Aftermarket Replacement
Application
Dryers (Maytag / Whirlpool platform)
Length
100"
Width
3/8" (5/16")
Ribs / Grooves
5 ribs / 4 grooves
Color
Black
Material
Rubber
Installation Orientation
Grooved side against motor pulley, smooth side against drum
Often Paired With
Idler Pulley (WP6-3037050), Drum Roller Kit (12001541 / 303373K)
Compatible Brands
Maytag, Jenn-Air, Whirlpool, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — Wear Work Gloves — Grooved Side Against Motor Pulley Disconnect power at the breaker or outlet before beginning. Wear work gloves to protect your hands from sharp sheet metal edges inside the dryer cabinet. Access the drum by removing the appropriate panels — the specific procedure varies by model, but on many vintage Maytag dryers this involves removing the front or top panel. Photograph the belt routing before disassembly if any belt fragments remain. Remove any pieces of the old broken belt from around the drum, motor pulley, and idler pulley, and vacuum out accumulated lint and belt dust. Clean any belt dust off the drum. Route the new Y312959 belt around the drum. Install with the grooved (ribbed) side against the motor pulley and the smooth side against the drum — this is the correct orientation for proper drive engagement. Because the belt is symmetrical, either end can face outward. A helpful tip from experienced installers: use two small pieces of tape to hold the belt against the drum while you lace it onto the idler and motor pulleys. From under or behind the drum, route the belt around the idler (tension) pulley and the drive motor pulley following the belt diagram for your model. Rotate the drum by hand a few full turns to confirm the belt seats correctly and rides smoothly without binding. While you have the machine apart, check that the idler pulley and drum support rollers spin freely — if they're rough or noisy, replace them now to protect the new belt. Reassemble the panels, restore power, and run a test cycle. Tools needed: Phillips screwdriver, nut driver, socket/ratchet, vacuum, work gloves, tape (helpful for holding the belt).
Frequently Asked Questions
My dryer runs but the drum won't turn — is the belt the problem?
Almost certainly, yes. When the motor runs (you hear the humming) but the drum stays still, the belt has almost always snapped. To confirm without opening the dryer: reach in and try turning the drum by hand. If it spins freely with no resistance whatsoever, the belt is broken. If it turns but feels notchy or resistant, the belt may still be intact but the drum rollers or bearings could be the issue. Opening the dryer to inspect is the definitive check — a snapped belt will be lying in the bottom of the cabinet. On decades-old Maytag dryers, a belt that finally snapped from age is one of the most common repairs.
Which way does the belt go — grooves in or out?
Install the belt with the grooved (ribbed) side facing the motor pulley and the smooth side against the drum. The ribs engage the grooved motor pulley for positive drive without slipping, while the smooth side rides against the large drum surface. Note that this is the opposite orientation from some other dryer belts (like certain Frigidaire belts where grooves face the drum) — so don't assume; follow the grooves-against-motor-pulley rule for this Maytag/Whirlpool-platform belt. The belt is symmetrical end-to-end, so either end can face outward; only the grooved-vs-smooth orientation matters.
Should I replace the idler pulley and drum rollers at the same time?
It's strongly recommended, especially on older dryers. The idler (tension) pulley (WP6-3037050) keeps the belt under proper tension, and the drum support rollers (kit 12001541 / 303373K) carry the drum's weight as it turns. All wear from the same friction and heat cycles as the belt. In fact, a common piece of repair advice is: before you replace the belt due to noise, check the drum support rollers and idler pulley first — worn rollers or a seized idler are frequent noise sources, and if you replace only the belt, the new belt may wear out prematurely against a bad pulley. Since the dryer is already apart, replacing all three together is efficient and saves a repeat repair.
What's the difference between Y312959 and WPY312959?
These are the same drum belt across production revisions. Y312959 was the earlier Maytag part number and WPY312959 is the Whirlpool-era part number (after Whirlpool acquired Maytag) for the same belt. WPY312959VP is a variant packaging code. All are physically and functionally identical — if your dryer's parts diagram shows any of these numbers, this listing is the correct replacement. The many other cross-references (3-12959, 314774, LB234, P46-150, etc.) reflect the belt's long production history across decades of Maytag dryers.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Maytag/Whirlpool OEM part, but is manufactured from durable rubber to match the dimensions (100"L x 3/8"W), rib and groove pattern (5 ribs, 4 grooves), and drive function of the original Y312959/WPY312959 drum belt used in compatible Maytag, Jenn-Air, Whirlpool, Amana, and Kenmore dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
ERP 40111201 Dryer Drum Belt
Replaces Part Numbers: WP40111201, 40111201, 14218936, 40051501, 40051502, 59174, AP6009126, AWP47792, EAP11742271, PD00002505, PS11742271, R0606549, WP40111201VP, 661570V, 661570, 3387610, 3389728, 3393999, 339728, 661570VP, AP5983729, PS11722115
Description: This Belt is a replacement part compatible with specific Whirlpool, Maytag, Speed Queen dryer models. The belt attaches to the motor pulley and spins the drum as the motor rotates. Over time, the belt can snap. This is due to general wear and tear, overloading, or excessive friction do to a damaged felt seal. Whenever the dryer belt breaks, the drum will not rotate and would need to be replaced.
This is an aftermarket part that can be used as a replacement for the OEM part.
(6 Pack) XPARTCO 40111201 Dryer Drum Belt – Replaces WP40111201 – Compatible with Whirlpool, Maytag & Kenmore Dryers
Product Description
Restore smooth drum rotation and dependable drying performance with the XPARTCO 40111201 Dryer Drum Belt. This high-quality replacement transfers power from the motor to the dryer drum, allowing consistent tumbling during drying cycles. A worn, stretched, or broken belt can cause the drum to stop turning, produce squealing noises, or prevent the dryer from completing cycles. Replacing it with this durable XPARTCO belt ensures reliable operation and efficient drying.
Replaces Part Numbers
WP40111201, 40111201, 14218936, 40051501, 40051502, 59174, PD00002505, EAP11742271, AP6009126, PS11742271, R0606549, WP40111201VP, 661570V, 661570, 3387610, 3389728, 3393999, 339728, 661570VP, PD00023608, AP5983729, PS11722115.
Compatibility
This replacement dryer drum belt fits select Whirlpool, Maytag, Kenmore, Amana, Estate, Roper, and Crosley dryers.
Example compatible models include (but are not limited to):Whirlpool WED4815EW1, WED5000DW2Maytag MEDC215EW1Kenmore 110.65132411
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM belt size, rib count, and tension
🌀 Restores Drum Rotation – Ensures smooth, consistent tumbling
💪 Reinforced Rubber Construction – Designed to resist stretching and wear
💰 Cost-Effective Repair – Reliable performance without OEM pricing
🛡️ Fixes Common Issues – Solves drum not turning, squealing noises, or belt slippage
📐 Product Specification
Part Number: 40111201
Component Type: Dryer Drum Belt
Material: Reinforced rubber
Belt Style: Multi-rib (OEM-equivalent) 4 Rib, 93.5"
Application: Motor-to-drum drive system
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock.
Steps:
Disconnect dryer power and open the cabinet.
Remove the drum to access the belt path.
Remove the worn belt from the motor and idler pulley.
Install the new XPARTCO 40111201 belt following the original routing.
Reinstall the drum, reassemble panels, and restore power.
Run a test cycle to confirm proper operation.
⏱️ Time Required: 30–45 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore smooth dryer operation — Add to Cart Now for a dependable, budget-friendly repair!
XPARTCO DC47-00019A Dryer Heating Element Replaces WP35001247
The XPARTCO DC47-00019A is an aftermarket replacement universal-fit dryer heating element compatible with a wide range of electric dryers across multiple manufacturers — including Samsung, Whirlpool, Maytag, Amana, Inglis, and Kenmore. The heating element generates the heat that warms the air circulating through the dryer drum, evaporating moisture from wet clothes during each drying cycle. When the element fails, the dryer continues to tumble normally but produces no heat, leaving clothes damp at the end of a complete cycle.
This replacement element comes pre-assembled with insulators and restring already attached, allowing for fast installation. Rated 240V, 5300W, with metal and ceramic construction. Overall dimensions are approximately 17"L x 6-1/2"W x 2-1/2"H. Important: this is a heating element assembly only — you must reuse the housing/cannister from your old element when installing the new one. It directly replaces DC47-00019A, 35001247, WP35001247, WP35001247VP, TJDC47-00019A, DE0019A, ERDC47-00019A, 35001119, 2068550, 1185561, AP4045884, AP4201899, AP6008695, AH2038533, EA2038533, EAP2038533, EAP11741835, PD00001991, PD00002996, PS2038533, PS4205218, and PS11741835. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO DC47-00019A Dryer Heating Element fixes Samsung, Whirlpool, Maytag, Amana, Inglis, and Kenmore electric dryers that tumble normally but produce no heat or take much longer than usual to dry. Universal-fit element — 240V, 5300W. 17"L x 6-1/2"W x 2-1/2"H. Insulators and restring pre-attached. Must reuse the housing/cannister from the old element. Replaces DC47-00019A, 35001247, WP35001247, WP35001247VP, TJDC47-00019A, DE0019A, ERDC47-00019A, 35001119, 2068550, 1185561, AP4045884, AP4201899, AP6008695, PS2038533, PS4205218, PS11741835.
Common Problems This Part Fixes
Dryer tumbles normally but produces no heat — element coil burned through
Dryer takes significantly longer than usual to dry a load
Clothes coming out damp or only partially dried at the end of a cycle
Visible breakage in the element coil — snapped or burned-through Ni-Cr wire
Dryer trips the circuit breaker when the heat setting is selected — shorted element
Burning smell during operation — element arcing at a weak point in the coil
Multimeter continuity test on the element shows an open circuit
Replaces Part Numbers
This dryer heating element directly replaces the following OEM and cross-reference part numbers across multiple brands:
DC47-00019A, 2068550, AP4201899, ASM33630, AP2038533, DE0019A, ERDC47-00019A, PD00001991, PS4205218, TJDC47-00019A, WP35001247, 35001247, 1185561, AP6008695, AWP47390, EAP11741835, PD00002996, PS11741835, WP35001247VP.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This universal-fit heating element is compatible with select electric dryers from multiple manufacturers:
Samsung electric dryers — DV2, DV3, DV4, DV5, DVE series (DV40J3000EW, DV42H5000EW, DV42H5200EW, DV42H5600EP, DV45H7000EW, DV48H7400EW, DV50F9A7EVW, DV50F9A7EVP, DVE50M7450W, DVE50R5200W, DVE50R5400V, DV203AEW, DV206LEW, DV209AEW, DV210AEW, DV419AEU, DV448AEE, DV448AEP, DV5471AEW and many related models)
Whirlpool electric dryers (select models — see WP35001247 cross-reference)
Maytag electric dryers (MDE6700AYW, MDE6700AZW, MDG6700AWM, MDG6700AWW and related)
Amana electric dryers (NED7200TW10, YIED7200TW10 and related)
Inglis electric dryers (select models)
Kenmore / Sears electric dryers (Samsung and Whirlpool-built — select models)
Important — Reuse Existing Housing: This listing is for the heating element assembly only — the metal housing/cannister that the element sits inside is not included. You must reuse the housing from your old element. Remove the old element from its housing, then install the new DC47-00019A element into that same housing before reinstalling in the dryer. Also: this part is for electric dryers only — gas dryer models use different components. Always verify your specific model number before ordering.
Key Features
Universal-fit replacement heating element for multiple dryer manufacturers — replaces both Samsung DC47-00019A and Whirlpool/Maytag WP35001247 part numbers
Generates the heat that warms drying air — essential for the dryer to actually dry clothes
Pre-strung Ni-Cr (nickel-chromium) heating wire — high heat conductivity and resistance to warping over time
Insulators and restring already attached — ready for installation into the existing housing
Rated 240V, 5300W — correct electrical specifications for compatible electric dryers
Dimensions: 17"L x 6-1/2"W x 2-1/2"H
Metal and ceramic construction — durable for repeated heat/cool cycles
Electric dryers only — NOT compatible with gas dryer models
Important: heating element assembly only — must reuse the housing/cannister from the old element
Replaces 22+ OEM and cross-reference part numbers across Samsung, Whirlpool, Maytag, Amana, and related brands
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
XPDC47-00019A
Also Replaces (Whirlpool-side)
WP35001247, 35001247
Part Type
Dryer Heating Element Assembly (Universal Fit)
Condition
Aftermarket Replacement
Application
Electric Dryers Only (NOT gas)
Voltage
240V AC
Wattage
5300W
Terminal Connections
2 spade terminals
Dimensions
17"L x 6-1/2"W x 2-1/2"H
Material
Metal / Ceramic / Ni-Cr coil wire
Includes
Heating element assembly with insulators and restring pre-attached (housing NOT included — reuse old)
Compatible Brands
Samsung, Whirlpool, Maytag, Amana, Inglis, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — Do Not Touch the Element with Bare Hands Disconnect power before beginning. Wear work gloves throughout — there are sharp sheet metal edges inside the dryer cabinet. The new heating element coil is sensitive to skin oils, which can cause premature burnout — handle the element only by the metal frame, not the coil wire. Remove the rear panel of the dryer to access the heating element housing/cannister. Take a photo of all wire connections and the orientation of the element before disconnecting anything. Disconnect the wires from the old element terminals and remove the housing from the dryer. With the housing on a workbench, remove the old element from inside the housing — note exactly how it sits and how the restring is positioned. Install the new DC47-00019A element into the same housing, following the same orientation as the old element. Do not let the Ni-Cr heating wire touch the housing during installation — this can cause arcing and immediate burnout. Reinstall the housing in the dryer, reconnect all wires snugly to the correct terminals, and reinstall the rear panel. Restore power and run a test heat cycle to confirm the dryer is heating properly. While the rear panel is open, inspect the high-limit thermostat, thermal fuse, and thermistor — if the element failed due to overheating, these may also be stressed. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves.
Frequently Asked Questions
Does this really fit both Samsung AND Whirlpool dryers?
Yes — this is one of the more unusual cases in dryer parts where an aftermarket heating element has been designed to serve as a direct replacement for both the Samsung DC47-00019A and the Whirlpool/Maytag WP35001247 (35001247) elements. The two OEM elements share the same physical dimensions, electrical specifications (240V, 5300W), and terminal configuration, allowing a single aftermarket element to function correctly in both platforms. Compatible models span Samsung's DV series, Whirlpool/Maytag's affected dryers (MDE6700/MDG6700 and similar), and select Amana, Inglis, and Kenmore Whirlpool-built or Samsung-built models. Always verify your specific model number before ordering.
Why do I need to reuse the housing from the old element?
This listing is for the heating element assembly only — the metal cannister or housing that contains the element is not included. The housing is a heavy gauge metal enclosure with mounting brackets that secure it to the dryer cabinet, along with airflow ducting that directs air across the heating coil. Reusing the housing keeps the cost down and is standard practice for this type of replacement. Carefully remove the old element from the housing, install the new element in its place, and then reinstall the housing in the dryer. If your housing is damaged or burned through, it will need to be replaced separately.
How do I know if the heating element has failed?
The clearest sign is a dryer that tumbles and runs through a complete cycle normally but produces little or no heat, leaving clothes damp at the end. You may also notice the dryer taking much longer than usual to dry a load as it tries to compensate. Visually inspecting the element after removing the rear panel can reveal burn marks, breaks in the coil, or visible arcing damage. A multimeter continuity test on the disconnected element will also confirm failure — a working element shows continuity, while a failed element reads an open circuit (no continuity).
Should I replace the thermal fuse and thermostats at the same time?
It's a good idea to inspect them. When a heating element fails — especially if it failed due to overheating rather than simple end-of-life wear — the paired thermal fuse, high-limit thermostat, and thermistor located in the same area can also be stressed by the heat event. Since the rear panel must already be open to replace the element, checking these components' continuity with a multimeter is a quick step that can prevent a repeat repair if any of them are also on the verge of failing.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung or Whirlpool OEM part, but is manufactured to match the electrical specifications (240V, 5300W), dimensions, and Ni-Cr coil construction of the original DC47-00019A and WP35001247 heating elements that it replaces.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WP40111201 Genuine OEM Whirlpool Dryer Drum Belt
The WP40111201 is a genuine Whirlpool OEM drum belt for full-size Whirlpool-built dryers. The belt is a long, slender loop that wraps all the way around the outside of the drum, passes around the tension (idler) pulley, and loops around the drive motor pulley. This belt is the sole mechanical connection between the motor and the drum — there is no gear or direct coupling — so when it breaks or slips off, the dryer behaves in a very specific way: the console lights up, the motor runs, the blower moves air, but the drum sits still. Open the door and spin the drum by hand and it will turn freely with no resistance.
This belt measures 93-3/8 inches long and 3/8 inch wide, with a 5-rib multi-groove profile. Belts fail from age and heat: the rubber hardens over years of thermal cycling, the ribs glaze over and begin slipping under a wet load, and eventually the belt cracks through or snaps outright. A screeching or squealing noise, a rhythmic thump timed to drum rotation, fraying at the edges, or black rubber dust in the cabinet are all signs a belt is near the end of its life. As a genuine OEM part, the WP40111201 is manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It directly replaces 40111201, WP40111201VP, 14218936, 40051501, 40051502, 59174, 821089, AP6009126, PS11742271, and R0606549.
Quick Answer
The WP40111201 Genuine OEM Whirlpool Dryer Drum Belt fixes full-size Whirlpool-built dryers where the motor runs but the drum won't turn, the drum spins freely by hand, or the dryer screeches, squeals, or thumps during operation. 93-3/8" long, 3/8" wide, 5-rib profile. Replaces 40111201, WP40111201VP, 14218936, 40051501, 40051502, 59174, 821089, AP6009126, PS11742271, R0606549. Grooves face against the motor pulley on this platform — same orientation as our Y312959 belt.
Common Problems This Part Fixes
Dryer runs and hums but the drum does not turn — the classic broken belt symptom
Drum spins freely by hand with no resistance when the door is open
Loud screeching or squealing that begins as soon as the cycle starts
Rhythmic thumping or slapping noise timed to drum rotation — cracked or split belt
Grinding or rumbling from inside the cabinet as a frayed belt drags
Drum turns slowly, intermittently, or stalls under a heavy wet load — glazed belt slipping
Dryer won't start, or inadequate heating reported alongside a belt-related noise
Black rubber dust or belt fragments found in the bottom of the cabinet
Visible cracking, fraying, glazing, or stretching on the old belt
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer drum belt directly replaces the following OEM and cross-reference part numbers:
WP40111201, 40111201, 14218936, 40051501, 40051502, 59174, PD00002505, EAP11742271, AP6009126, AWP47792, PS11742271, R0606549, WP40111201VP, 661570V, 661570, 3387610, 3389728, 3393999, 339728, 661570VP, AP5983729, PS11722115.
40111201 is the long-running legacy Whirlpool number and WP40111201 is the current part number carrying the "WP" prefix. If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum belt is compatible with select full-size Whirlpool-built dryers across the Whirlpool family of brands, including:
Whirlpool electric and gas dryers
Maytag dryers (select Whirlpool-built models)
KitchenAid dryers (select models)
Amana dryers (select models)
JennAir dryers (select models)
Kenmore dryers (select Whirlpool-built models, including SDG3606AWW)
Roper, Estate, Admiral, Crosley, Inglis, Magic Chef, and Norge dryers (select models)
This belt fits a large number of standard full-size front-load dryers used across North America. Because the compatible model list spans many years and revisions, always verify your full model number against your dryer's data label before ordering.
Note: Whirlpool and Maytag use more than one length of drum belt across their dryer lineups, and belts of a similar rib count and width are not automatically interchangeable. This belt is 93-3/8" long — it is NOT the same belt as our 100"-long Y312959 belt used on other Maytag/Whirlpool platforms. A belt that's too long or too short for your drum will slip, walk off the pulley, or fail to seat properly. Measure your old belt or verify your model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified length, rib profile, and tension
93-3/8" length, 3/8" width, 5-rib multi-groove design
Wraps around the drum, tension pulley, and drive motor pulley to transfer motor rotation to the drum
Resolves "motor runs but drum won't turn," "screeching," "squealing," and "drum spins freely by hand" symptoms
Multi-rib construction grips the motor pulley without slipping under heavy wet loads
Direct drop-in replacement — no cutting, splicing, or modification required
Replaces 40111201, WP40111201VP, 14218936, 40051501, 40051502, 59174, 821089, AP6009126, PS11742271, and R0606549
Compatible with Whirlpool, Maytag, KitchenAid, Amana, JennAir, Kenmore, Roper, Estate, Admiral, Crosley, Inglis, Magic Chef, and Norge dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WP40111201
Part Type
Dryer Drum Drive Belt
Condition
Genuine OEM
Brand
Whirlpool
Length
93-3/8 in.
Width
3/8 in.
Ribs
5
Material
Reinforced rubber
Rib Orientation
Grooves face against the motor pulley
Routing
Around drum → tension pulley → drive motor pulley
Fuel Type
Electric and gas dryers
Quantity
1 belt
Compatible Brands
Whirlpool, Maytag, KitchenAid, Amana, JennAir, Kenmore, Roper, Estate, Admiral, Crosley, Inglis, Magic Chef, Norge
Installation Notes
⚠️ Unplug Dryer Before Starting — Photograph Belt Routing First Disconnect power at the outlet or shut off the circuit breaker before beginning. On a gas model, also close the gas shutoff valve before moving the cabinet. Wear work gloves — sheet metal edges inside the cabinet are sharp. Pull off the lint trap and remove the screws securing the top panel, then raise the panel and support it with a block of wood. Remove the rear access panel to locate the motor, blower wheel, and belt. Photograph how the old belt routes around the drum, the tension pulley, and the motor pulley before removing anything — if the belt is already broken, note that the grooved side of this belt rides against the motor pulley, with the smooth back facing the drum. Loosen and remove the motor mount, lift the motor slightly, and slide the old belt free. The front panel typically needs to come off as well to fully access the drum. Vacuum out accumulated lint while the cabinet is open — lint buildup around the motor and idler is what cooks belts prematurely. Place the new belt around the drum, seat it in the polished wear track left by the old belt, then route it around the tension pulley and around the motor pulley. Useful trick: tape the belt loosely to the drum with a strip of masking tape before repositioning the motor, so it doesn't slide off while you work. Re-secure the motor mount, then rotate the drum by hand several full turns and confirm the belt tracks straight and stays centered without walking toward an edge. While you're in there, spin the tension pulley and each drum roller by hand — if any is noisy, gritty, or has play, replace it now, since a seized pulley or worn roller will destroy the new belt quickly. Reassemble the front and rear panels and the top panel, restore power, and run a short empty cycle listening for squeal or thump before loading it. Tools needed: Phillips screwdriver, 5/16" nut driver, flat-blade screwdriver, putty knife, masking tape, work gloves.
Frequently Asked Questions
How do I confirm the belt is broken and not the motor?
With the dryer unplugged, open the door and try to spin the drum by hand. An intact belt gives firm resistance, because you're turning the motor and idler through the belt. If the drum coasts freely like a bicycle wheel, the belt is broken or has jumped off its pulleys. Sound is the other tell: with a broken belt the motor hums and the blower whooshes normally, so the dryer sounds like it's running perfectly while the drum sits still. A failed motor usually buzzes and does nothing, or trips the breaker outright.
What's the difference between WP40111201 and 40111201?
They are the same belt across production revisions. 40111201 was the long-running legacy Whirlpool number and WP40111201 is the current number carrying the "WP" prefix Whirlpool adopted. WP40111201VP is a variant packaging code for the same belt. If your dryer's parts diagram or the old belt itself shows any of these numbers, this listing is the correct replacement. The remaining cross-references (14218936, 40051501, 40051502, 59174, 821089, AP6009126, PS11742271, R0606549) are catalog identifiers used by various parts distributors for the same belt.
Is this the same belt as your Y312959 listing?
No. This belt is 93-3/8" long, while the Y312959 belt in our catalog is 100" long — the two are used on different Maytag/Whirlpool dryer platforms and are not interchangeable. Both share a similar 5-rib profile and grooves-against-motor-pulley orientation, which is exactly why they're easy to confuse. Always check your model number or measure your old belt's length before ordering either one.
Which way do the grooves face on this belt?
On this Whirlpool platform, the grooved (ribbed) side of the belt rides against the motor pulley, with the smooth back of the belt facing the drum. This is the same orientation as our Y312959 belt, but it is the opposite of some other manufacturers' platforms — for example, Frigidaire's 134719300 belt runs with the grooves facing down against the drum instead. Always confirm orientation for your specific brand and platform, and photograph the old belt before removing it whenever possible.
The dryer squeals but the drum still turns. Belt or something else?
Could be either, and it's worth diagnosing before you order. A glazed or hardening belt squeals as it slips on the motor pulley, usually loudest at startup and under a heavy wet load. But a dry tension pulley bearing makes a very similar squeal, and worn drum rollers add a low rumble underneath. With the cabinet open, spin the tension pulley and each roller by hand — they should turn smoothly and silently. If they're gritty, noisy, or have play, replace them along with the belt, since they share the same teardown and you'd otherwise be opening the dryer twice.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original 93-3/8" length, 3/8" width, and 5-rib profile of the drum belt originally installed in your Whirlpool, Maytag, KitchenAid, Amana, or related dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DC97-16782A Dryer Drum Roller
The XPARTCO DC97-16782A is an aftermarket replacement drum support roller compatible with select Samsung and Kenmore dryers. The drum roller is a rear support wheel that cradles the dryer drum and allows it to rotate smoothly during every drying cycle. Over time, the rollers wear down, causing the drum to wobble, squeak, or thump during operation — replacing them restores quiet, stable drum rotation.
This roller features a self-lubricating bushing and includes the roller shaft and mounting tri-ring clips for a complete, ready-to-install assembly. It measures approximately 3-1/4 inches in diameter and directly replaces OEM part numbers DC97-16782A, DC97-07523A, and DC97-07523B. Sold individually — most Samsung dryers use two rear drum rollers, so we recommend replacing both at the same time. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO DC97-16782A Dryer Drum Roller fixes squeaking, thumping, or rumbling noises coming from Samsung and Kenmore dryers during operation. The drum roller supports the rear of the dryer drum — when worn, it causes noise and uneven drum rotation. Includes roller shaft and mounting clips. Approximately 3-1/4" diameter. Compatible with select Samsung and Kenmore dryers.
Common Problems This Part Fixes
Loud squeaking, thumping, or rumbling noise during dryer operation
Drum wobbling or vibrating excessively during the drying cycle
Grinding or scraping sound as the drum rotates
Dryer making noise that gets worse over time
Visible flat spots, cracks, or worn surfaces on existing drum rollers
Drum not rotating smoothly or spinning unevenly
Replaces Part Numbers
This drum roller directly replaces the following OEM and cross-reference part numbers:
DC97-16782A, DC97-16782C, DC97-16782D, 2027851, DC97-07523A, DC97-07523B, PD00002021, EAP4221885, AP5325135, PS4221885, WPW10177428, AP6016361, W10177428, 35001136, DC97-07523A, ASM930889, PD00003650, EAP11749648, AP6016361, PS11749648.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum roller is compatible with select dryers from the following brands:
Samsung dryers (gas and electric — DV2, DV3, DV4, DV5, DVE, DVG series)
Kenmore / Sears dryers (select models built on Samsung platform)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Supports the rear of the dryer drum for smooth, stable, quiet rotation during every cycle
Approximately 3-1/4" diameter — direct replacement for OEM DC97-16782A, DC97-07523A, and DC97-07523B
Self-lubricating bushing — no additional grease or oil required after installation
Complete assembly includes roller shaft and mounting tri-ring clips — everything needed for installation
Durable rubber and metal construction — resists wear, cracking, and heat damage
Aftermarket replacement built to OEM-equivalent quality standards
Often replaced together with the drum belt (6602-001655) and idler pulley (DC93-00634A) for a complete drum drive repair
DIY-friendly repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
DC97-16782A
Part Type
Dryer Drum Support Roller
Condition
Aftermarket Replacement
Application
Gas and Electric Dryers
Diameter
Approximately 3-1/4 inches
Dimensions
3" L x 2-1/2" W x 3" H
Material
Rubber / Plastic / Metal
Lubrication
Self-lubricating bushing (no grease needed)
Includes
Roller, shaft, and mounting tri-ring clips
Sold As
Single roller (most dryers require 2 — replace both)
Compatible Brands
Samsung, Kenmore
Often Replaced With
6602-001655 Drum Belt, DC93-00634A Idler Pulley
Installation Notes
⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. To access the drum rollers, remove the top panel and front panel of the dryer, then release the drum belt tension at the idler pulley and lift the drum out of the cabinet. The two rear drum rollers are located on the rear bulkhead. Remove the mounting clip, slide the old roller off the shaft, and install the new DC97-16782A roller — the shaft thread is clockwise. Reinstall the mounting clip to secure the roller. Replace both rear rollers at the same time even if only one appears worn. Reassemble the dryer, restore power, and run a test cycle. Tip: While the drum is out, inspect and replace the drum belt (6602-001655) and idler pulley (DC93-00634A) if worn. Tools needed: Phillips screwdriver, putty knife or flat pry tool.
Frequently Asked Questions
How many drum rollers does my Samsung dryer need?
Most Samsung dryers have two rear drum support rollers. This listing is for a single roller. We strongly recommend replacing both rollers at the same time — even if only one appears damaged — since they wear at the same rate and replacing both prevents the need to disassemble the dryer again soon after.
What does the drum roller do?
The drum rollers are support wheels mounted on the rear bulkhead of the dryer. They cradle the back edge of the dryer drum and allow it to spin smoothly during operation. When the rollers wear down or develop flat spots, the drum wobbles and creates loud squeaking, thumping, or grinding noises.
Does DC97-16782A replace DC97-07523A and DC97-07523B?
Yes. The DC97-16782A is the updated part number that directly supersedes both DC97-07523A and DC97-07523B. If your dryer originally used either of those older part numbers, the DC97-16782A is the correct current replacement.
Should I also replace the drum belt and idler pulley at the same time?
Yes — since the dryer is already fully disassembled to replace the rollers, it is highly recommended to also inspect and replace the drum belt (6602-001655) and idler pulley (DC93-00634A) at the same time. These three parts wear together and are commonly sold as a dryer repair kit, saving you from having to take the dryer apart again in the near future.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is made from durable rubber, plastic, and metal to match the dimensions and performance of the original DC97-16782A roller.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
EXP652 Dryer Belt and Idler Pulley Replaces WPW10112954, 279640
The EXP652 is an aftermarket replacement drum belt and idler pulley kit for Whirlpool and Maytag electric and gas dryers, and also fits select KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. These two components work together: the drum belt circles the drum and attaches to the motor pulley to transmit rotation, while the idler pulley rides against the belt to maintain proper tension so it doesn't slip or sag during operation.
Because these two parts share the same drive path and tend to wear on a similar timeline, they're commonly sold and replaced together. Symptoms of failure include the dryer not starting, the drum not tumbling or spinning, and noise issues such as squealing or rubbing during operation. It directly replaces W10112954, WPW10112954, AP6015116, PS11748388 (drum belt), and AP3094197, PS334244, 279640, and 3388674 (idler pulley).
Quick Answer
The EXP652 Dryer Belt and Idler Pulley fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric and gas dryers that won't start, won't tumble or spin, or make squealing/rubbing noise. Includes drum belt and idler pulley. Replaces W10112954, WPW10112954, AP6015116, PS11748388, AP3094197, PS334244, 279640, 3388674. These two parts wear together — replacing both at once, rather than just the one that failed, helps avoid reopening the dryer again soon after.
What's In The Kit
Component
Replaces
Function
Drum Belt
WPW10112954 / W10112954
Circles the drum and attaches to the motor pulley to transmit rotation and keep the drum tumbling.
Idler Pulley
279640
Rides against the belt to maintain proper tension so it doesn't slip or sag.
Common Problems This Kit Fixes
Dryer won't start
Drum won't tumble or spin
Squealing or rubbing noise during operation
Belt slipping or sagging, causing inconsistent tumbling
Extended or inconsistent drying times
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer belt and idler pulley kit directly replaces the following OEM and cross-reference part numbers:
Belt Replaces Part Numbers
WPW10112954, W10112954, 1447719, AP6015116, AWP48873, EAP11748388, PD00003553, PS11748388
Idler Pulley Replaces Part Numbers
279640, 279640VP, 2958, 3388672, 697692, TJ279640, W10468057, AH334244, EA334244, ER279640, AWP39098, PD00002356, EAP334244, AP3094197, PS334244.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This kit is compatible with select Whirlpool electric and gas dryers, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers built on the Whirlpool platform, including model numbers such as MED8000AG0, MED8000AW0, MGD6000XW0, MGD6000XW1, MGD6000XW2, MGD8000AG0, MGD8000AG1, MGD8000AW0, MGD8000AW1, 4KMEDC300BW0, 7MMGD0100TQ1, and MGD5500FC0.
Note: Whirlpool also uses a different idler pulley, W10837240, on other dryer models — this kit specifically pairs the WPW10112954 belt with the 279640 idler pulley. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement kit — drum belt and idler pulley in one purchase
Resolves "won't start," "won't tumble or spin," and "squealing/rubbing noise" symptoms
Restores smooth drum rotation with proper belt tracking and tension
Reduces noise and vibration from a worn belt or pulley
Direct drop-in replacement matching the original belt length and pulley mounting
Replaces W10112954, WPW10112954, AP6015116, PS11748388, AP3094197, PS334244, 279640, and 3388674
Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric and gas dryers
Built to OEM-equivalent quality standards
Product Specifications
Part Number
EXP652
Set Contents
1x Drum Belt (replaces WPW10112954), 1x Idler Pulley (replaces 279640)
Condition
Aftermarket Replacement
Application
Whirlpool / Maytag Electric and Gas Dryers
Belt Length
Approx. 92-1/2"
Belt Profile
Flat, 5 ribs, 4 grooves
Related Idler Pulley
W10837240 (for other models, sold separately)
Repair Difficulty
Moderate — front/top panel and drum removal required
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — This Is A Bigger Repair Requiring Significant Disassembly Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Remove the top and front panels of the dryer, then the drum, to access the belt and idler pulley. Remove the old drum belt from around the drum and motor pulley. Remove the old idler pulley from its mounting bracket. Install the new EXP652 idler pulley in the same position, making sure it spins freely by hand before continuing. Route and install the new drum belt correctly around the drum and motor pulley, matching the original path exactly, and re-tension it through the idler pulley. Reinstall the drum, then reassemble the front and top panels. Restore power and run a test cycle to confirm quiet, smooth operation with the drum tumbling normally and no squealing or rubbing noise. Tools needed: nut driver, Phillips screwdriver, work gloves.
Frequently Asked Questions
My dryer's motor runs but the drum won't turn. Is this the right kit?
Yes, this is the classic symptom addressed by a worn or broken drum belt, and since the idler pulley works together with the belt to maintain proper tension, replacing both at once addresses the most common causes of this problem in one repair.
Do I need to replace both parts, or just the one that failed?
You can replace just the failed component if you've confirmed which one is actually bad, but these two parts share the same drive path and tend to wear out around the same time — a worn pulley can accelerate belt wear, and a worn belt puts extra strain on the pulley. Replacing both together, since you'll already have the dryer largely disassembled for access, helps avoid a second teardown soon after.
Is this the same idler pulley as your other Whirlpool dryer belt kits?
Not necessarily — Whirlpool uses more than one idler pulley design across its dryer lineup. This kit specifically pairs the WPW10112954 belt with the 279640 idler pulley. Other kits may pair the same belt with a different pulley, such as W10837240, used on other models. Always confirm your full model number before ordering.
Is this an OEM or aftermarket part?
This is an aftermarket replacement kit built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the belt length, rib pattern, and pulley design of the original WPW10112954 belt and 279640 idler pulley used in compatible Whirlpool, Maytag, and related electric and gas dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 134511600 Washer Drive Belt Replaces WH07X10009
The XPARTCO 134511600 is an aftermarket replacement washer drive belt (V-belt) compatible with a wide range of Frigidaire, Electrolux, GE, Gibson, Crosley, Kenmore, Tappan, White-Westinghouse, and Kelvinator washing machines. The drive belt connects the drive motor to the washer's drive system, transferring power to spin the basket and drive the transmission during agitation and spin cycles. When the belt wears out, stretches, frays, or snaps, the washer motor runs but the tub doesn't spin or agitate — one of the most recognizable failure patterns in appliance repair.
This is a universal-fit aftermarket belt that spans both the Frigidaire/Electrolux platform (134511600-series part numbers) and the GE platform (WH07X-series part numbers) — one physical belt covers both manufacturers' cross-referenced drive belt positions on compatible washers. V-belt profile, approximately 1/2" wide with a 31–32" circumference. It directly replaces 134511600, 134161100, 131686100, 131234000, 1156860, 145371, 3204418, F145371, F145371-000, AP3867042, AP3203734, AH1146950, EA1146950, PS1146950, PS960606, WH07X10009, WH07X10002, WH07X0113, WH7X10009, WH7X10002, WH7X113, AH960606, EA960606, and 1089279. Belt failures typically come from normal wear, stretching, fraying, or snapping due to overloading. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The XPARTCO 134511600 Washer Drive Belt fixes Frigidaire, Electrolux, GE, Gibson, Crosley, Kenmore, Tappan, and White-Westinghouse washers where the motor runs but the tub won't spin or agitate, the washer makes squealing or burning-rubber smells, or the belt is visibly cracked, frayed, or snapped. V-belt, approximately 1/2" wide x 31–32" circumference. Universal-fit — spans both Frigidaire (134511600) and GE (WH07X10009) platforms. Replaces 134161100, 131686100, 131234000, 1156860, AP3867042, AP3203734, PS1146950, PS960606, WH07X10009, WH07X10002, WH7X113 and more.
Common Problems This Part Fixes
Washer motor runs but the tub won't spin — belt snapped or slipping
Washer won't agitate — belt no longer driving the transmission
Tub spins slowly or intermittently — belt worn, stretched, or glazed
Loud squealing or screeching during the spin cycle — belt slipping on the pulleys
Burning rubber smell during operation — belt slipping and overheating
Belt visibly cracked, frayed, glazed, or stretched
Belt broken completely — often found lying in the bottom of the cabinet
Clothes coming out sopping wet because the spin cycle isn't working
Washer stops mid-cycle when it should transition to spin
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This universal-fit washer drive belt directly replaces the following OEM and cross-reference part numbers across multiple brands:
134511600, 1156860, 131234000, 131686100, 134161100, 145371, 3204418, AH1146950, AP3867042, EA1146950, F145371, F145371-000, AFR14885, PD00000111, PS1146950, WH07X10009, WH07X0113, WH07X10002, WH7X10002, WH7X10009, WH7X113, AH960606, EA960606, AP3203734, PS960606.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This universal-fit drive belt is compatible with select washing machines from the following brands:
Frigidaire washers — FLEB43RGS3, FLEB8200FS0, FLGB43RGS1, FLSE72GCS8, FLSG72GCSA, FWS223RFS0, FWS777GHS0, FWS933FS0, FWX233RES4, FWX645LBS4, FWXB45RGS0, FEZ831AS2 and related models
Electrolux washers — select models on the Frigidaire platform
GE washers and washer/dryer combo units — select models (WH07X10009 cross-reference)
Crosley washers — CLCE500FW0, CLCE500FW1, CLCE500FW2, CLCG500FW0, CLCG500FW1, CLCG500FW3 and related models
Gibson washers — select models
Kelvinator washers — select models
Tappan washers — select models
White-Westinghouse washers — select models
Kenmore / Sears washers — select Frigidaire-built and GE-built models
Hotpoint and RCA washers — select GE-built models
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Universal-fit washer drive belt (V-belt) — replaces both Frigidaire/Electrolux (134511600-series) and GE (WH07X-series) OEM drive belts in a single aftermarket part
Connects the drive motor to the washer's drive system, spinning the basket and driving the transmission
Resolves "motor runs but tub won't spin," "won't agitate," "squealing," and "burning rubber smell" symptoms
V-belt profile: approximately 1/2" wide with a 31–32" circumference
Durable rubber construction engineered to resist stretching, cracking, and glazing under load
Replaces 23+ OEM and cross-reference part numbers spanning Frigidaire, Electrolux, GE, and universal aftermarket catalogs
Compatible with Frigidaire, Electrolux, GE, Gibson, Crosley, Kenmore, Tappan, White-Westinghouse, Kelvinator, Hotpoint, and RCA washers
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
134511600
Also Replaces (GE-side)
WH07X10009
Part Type
Washer Drive Belt (V-Belt) — Universal Fit
Condition
Aftermarket Replacement
Application
Washing Machines (Frigidaire and GE platforms)
Belt Profile
V-belt
Width
Approximately 1/2"
Circumference
Approximately 31–32"
Material
Rubber
Also Known As
V-Belt
Compatible Brands
Frigidaire, Electrolux, GE, Gibson, Crosley, Kenmore, Tappan, White-Westinghouse, Kelvinator, Hotpoint, RCA
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Work Gloves Disconnect the washer from all utilities — unplug it from the outlet (or shut off the breaker) and turn off the hot and cold water supplies — before beginning. Wear work gloves to protect your hands from sharp sheet metal edges inside the cabinet. Pull the washer away from the wall to give yourself room to work. Access the drive belt by removing the rear access panel or tilting/laying the washer to reach the underside — the specific procedure varies by model, so consult your appliance's service diagram. Photograph the belt routing before removing anything so you can match the path with the new belt. Remove any pieces of the old broken belt from around the motor pulley and the transmission/drive pulley, and clear out accumulated lint or debris. Inspect the pulleys while you're in there — if a pulley is rough, grooved, or wobbly, the new belt will wear out prematurely and the pulley should be addressed too. Route the new 134511600 belt around the drive motor pulley and the transmission pulley, following the same path as the original. Rotate the pulleys by hand a few full turns to confirm the belt seats correctly in the pulley grooves and rides smoothly without twisting or binding. Confirm proper belt tension — the belt should be snug with a small amount of deflection, not loose enough to slip or so tight that it stresses the bearings. Reinstall the access panel, restore water and power, and run a test cycle to confirm the tub agitates and spins normally. Tools needed: Phillips screwdriver, nut driver, socket/ratchet, work gloves.
Frequently Asked Questions
My washer motor runs but the tub won't spin — is the belt the problem?
Almost certainly, yes. When you can hear the motor running (a hum or whir) but the tub stays still or barely turns, the drive belt has almost always snapped, slipped off its pulleys, or worn to the point where it can't grip. A quick check: unplug the washer, open the cabinet, and look for a belt lying loose in the bottom — a snapped belt is unmistakable. If the belt is still on the pulleys but glazed, cracked, or stretched, it's slipping rather than driving and needs replacement. Other symptoms that point to the belt: a squealing noise during spin, or a burning-rubber smell from the belt slipping and overheating against the pulleys.
Does this really fit both Frigidaire AND GE washers?
Yes — this is a genuine cross-brand part. The same V-belt design serves as a direct replacement for both the Frigidaire/Electrolux 134511600-series and the GE WH07X-series drive belts, and the two OEM catalogs are cross-referenced to each other through the 134161100 number. The belts share the same V-profile, width (approximately 1/2"), and circumference (31–32"), allowing a single aftermarket belt to function correctly in both platforms. Compatible models span Frigidaire's FLEB/FLGB/FLSE/FLSG/FWS/FWX series, GE washers and washer/dryer combos, plus Crosley, Gibson, Kelvinator, Tappan, White-Westinghouse, Kenmore, Hotpoint, and RCA models. Always verify your specific model number before ordering.
What causes a washer drive belt to fail?
The most common causes are normal wear and tear from continuous use, stretching over time (which reduces grip and causes slipping), fraying or cracking from age and repeated flexing, and snapping due to overloading the washer or improper installation. Chronic overloading is a big contributor — forcing the motor to drive an over-packed tub puts extreme stress on the belt. Belt failures can also be accelerated by a worn or seized pulley, which is why it's worth inspecting the motor and transmission pulleys whenever you replace the belt. If a pulley is rough, grooved, or wobbly, the new belt will wear out quickly against it.
How tight should the new belt be?
The belt should be snug in the pulley grooves with a small amount of deflection when you press on it — firm enough that it won't slip under load, but not so tight that it puts excess strain on the motor and transmission bearings. Most washers with a V-belt drive use a spring-loaded or adjustable motor mount to set tension automatically; if yours has an adjustment, follow your model's service specification. After installing, rotate the pulleys by hand a few full turns and confirm the belt tracks correctly in the grooves without twisting or riding up the sides.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Frigidaire, Electrolux, or GE OEM part, but is manufactured from durable rubber to match the V-belt profile, dimensions (approximately 1/2" wide x 31–32" circumference), and drive function of the original 134511600 and WH07X10009 washer drive belts used across compatible Frigidaire, Electrolux, GE, Gibson, Crosley, Kenmore, Tappan, White-Westinghouse, Kelvinator, Hotpoint, and RCA washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
8540101CM Washer Drive Belt
Washing machine inner tub drive belt
6 Rib, 51.33"
Description: The Drive Belt is a replacement for specific Whirlpool, Maytag, Kenmore washer models. It transmits power from the washer motor to the tub, causing it to rotate during wash and spin cycles Causes of a worn drive belt can include repetitive cycles over years of use. The belt undergoes stress each time the tub is set in motion. Damage from slipping off pulleys during operation can also affect the belt.
Replaces Part NumbersWP8540101, 8540101, 8540348, AP6013037, PS11746258
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
EXP651 Dryer Belt and Idler Pulley Kit Replaces WPW10112954, W10837240
The EXP651 is an aftermarket dryer repair kit containing two essential drum drive components for select Whirlpool, Maytag, Amana, Kenmore, KitchenAid, Crosley, Admiral, Inglis, and Roper dryers. The kit includes one drum belt (replaces WPW10112954) and one idler pulley assembly with bracket (replaces W10837240) — the two parts most commonly worn together when a dryer drum stops spinning or becomes noisy.
Replacing both the belt and idler pulley at the same time is the smart repair choice. Since the dryer must be disassembled to access either part, doing both in one repair saves you from having to take the machine apart again if the second part fails shortly after. This kit covers the two most common failure points in the Whirlpool-family dryer drum drive system.
Quick Answer
The EXP651 Dryer Belt and Idler Pulley Kit fixes dryers where the drum is not spinning, making loud squeaking or grinding noises, or the belt has broken. Includes one 93-1/4" x 5/16" 5-rib drum belt (WPW10112954) and one idler pulley assembly with bracket (W10837240). Compatible with select Whirlpool, Maytag, Amana, Kenmore, KitchenAid, Crosley, Admiral, Inglis, and Roper dryers.
What's in the Kit
Part 1 of 2
Dryer Drum Belt — Replaces WPW10112954
93-1/4" L x 5/16" W x 1/8" H · 5-rib Multi-V rubber belt · Wraps around drum and connects to motor and idler pulleys to drive drum rotation
Part 2 of 2
Idler Pulley Assembly with Bracket — Replaces W10837240
2-1/8" pulley diameter · 6-1/4" L x 1-1/4" W x 3-7/16" H overall · Plastic/metal construction · Maintains correct belt tension to spin the drum · Fits Whirlpool dryers with lint screen inside door
Common Problems This Kit Fixes
Dryer drum not spinning — motor runs but drum stays still
Loud squeaking, squealing, or grinding noise during operation
Clothes not tumbling during the drying cycle
Thumping or slapping noise when dryer is running
Belt slipping off or repeatedly breaking
Burning rubber smell coming from the dryer
Dryer drum turning erratically or stopping while motor continues to run
Replaces Part Numbers
Drum Belt (WPW10112954) cross-references:
WPW10112954, W10112954, 1447719, AWP48873, PD00003553, EAP11748388, AP6015116, PS11748388.
Idler Pulley Assembly (W10837240) cross-references:
W10837240, W10547287, W10547290, 3387372, 3388674, W10118754, W10118756, W10837240VP, AWP41730, PD00025564, FIX11726337, AP5988716, PS11726337, 279640, AP3094197, 279640VP, 2958, 3388672, 697692, TJ279640, W10468057, AH334244, EA334244, ER279640, PS334244.
If your part numbers are not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This kit is compatible with select dryers from the following brands:
Whirlpool dryers (gas and electric — fits models with lint screen inside door)
Maytag dryers (gas and electric)
Amana dryers
Kenmore / Sears dryers (select Whirlpool-built models)
KitchenAid dryers
Crosley dryers
Admiral dryers
Inglis dryers
Roper dryers
Note: The W10837240 idler pulley fits Whirlpool-family dryers with the lint screen located inside the door. If your dryer has the lint screen on top of the cabinet, a different idler pulley part number may be required. Contact our support team to confirm before ordering.
Key Features
Two-part kit covers the most common drum drive failures in Whirlpool-family dryers in a single repair
Belt: 93-1/4" L x 5/16" W, 5-rib Multi-V rubber — resists cracking, stretching, and heat damage
Idler pulley: 2-1/8" diameter pulley with arm and bracket — maintains correct belt tension for smooth drum rotation
Replacing both parts together saves a second disassembly if the other part fails soon after
Aftermarket replacement built to OEM-equivalent quality standards
Belt directly replaces WPW10112954 / W10112954 — no modification required
Idler pulley directly replaces W10837240 / W10547287 / W10547290 — no modification required
DIY-friendly repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Kit Part Number
EXP651
Condition
Aftermarket Replacement
Application
Gas and Electric Dryers
Kit Includes
1x Drum Belt (WPW10112954), 1x Idler Pulley Assembly with Bracket (W10837240)
Belt Length
93-1/4 inches
Belt Width
5/16 inch
Belt Height
1/8 inch
Belt Ribs
5 ribs, 4 grooves (Multi-V)
Belt Material
Rubber
Pulley Diameter
2-1/8 inches
Pulley Overall Dimensions
6-1/4" L x 1-1/4" W x 3-7/16" H
Pulley Material
Plastic / Metal
Compatible Brands
Whirlpool, Maytag, Amana, Kenmore, KitchenAid, Crosley, Admiral, Inglis, Roper
Installation Notes
⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. Remove the lint screen, then unscrew the Phillips screws inside the lint screen housing. Use a putty knife to release the top panel clips and lift the top panel. Remove the front panel to access the drum and drive components. Release belt tension at the old idler pulley, lift the drum slightly, and slide the old belt off. Remove the old idler arm assembly by unscrewing the mounting screw, then install the new W10837240 idler pulley assembly and secure with the screw. Loop the new WPW10112954 belt around the drum with the ribbed side facing inward, then route it around the new idler pulley and motor pulley. Consult your model's service manual or a model-specific repair video for the correct belt path. Reassemble and run a test cycle. Tools needed: Phillips screwdriver, putty knife or flat pry tool.
Frequently Asked Questions
Why should I replace the belt and idler pulley at the same time?
The belt and idler pulley wear together — when one fails, the other is usually close behind. Since the dryer must be fully disassembled to access either part, replacing both in a single repair saves you from having to take the machine apart again soon after. It also protects the new belt from being damaged by a worn pulley, and vice versa.
How does the W10837240 differ from other Whirlpool idler pulleys?
The W10837240 is the updated idler pulley arm and bracket assembly designed for Whirlpool-family dryers that have the lint screen inside the door. It replaces the older W10547287 and W10547290 assemblies. Some older or different Whirlpool models use a different idler pulley style — if you're unsure which one your dryer needs, contact our support team with your model number before ordering.
What is the difference between WPW10112954 and W10112954?
These are the same belt. WPW10112954 is the updated Whirlpool OEM part number that superseded the original W10112954. Both refer to the identical drum belt included in this kit.
Should I also replace the drum rollers at the same time?
It depends on the condition of your rollers. Since the dryer is already fully disassembled, it is a good opportunity to inspect the drum support rollers for flat spots, cracks, or wobbling. If they show any wear, replacing them at the same time is recommended to avoid a third disassembly. Check your model's roller part number before ordering.
Are these OEM or aftermarket parts?
Both parts in this kit are aftermarket replacements built to OEM-equivalent quality standards. They are not genuine Whirlpool OEM parts, but are manufactured to match the dimensions and performance of the original WPW10112954 belt and W10837240 idler pulley assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
