XPARTCO 5304516132 Washer Drive Belt – Compatible with Frigidaire, Electrolux, and Kenmore Washers
Product Description
Keep your washer spinning smoothly with the XPARTCO 5304516132 Washer Drive Belt. This high-quality aftermarket replacement transfers power from the motor to the washer drum, enabling proper agitation and spin speed. A worn, stretched, or broken belt can cause slow spinning, loud noises, or the drum not turning at all. Replacing it with this durable XPARTCO belt restores reliable performance and efficient wash cycles.
Replaces Part Numbers
5304516132, 12638000001161, 7PJE607, PD00055739, EAP12585162, 4839724, AP6339955, PS12585162.
Compatibility
This replacement drive belt fits select Frigidaire, Electrolux, and Kenmore front-load washers.
Example compatible models include (but are not limited to): Frigidaire FAFW3801LW, Electrolux EWFLS70JSS0, and Kenmore 417.41122310.
Always verify your washer's model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM fit and performance at a lower cost
⚙️ Restores Drum Motion – Ensures proper spinning, agitation, and wash performance
💪 Durable Construction – Made with reinforced rubber for long-lasting tension
🛠️ Easy Installation – Designed for quick DIY replacement
🛡️ Fixes Common Issues – Solves slow spinning, no spin, squealing noises, or drum not turning
📐 Product Specification
Part Number: 5304516132
Component Type: Washer Drive Belt
Material: Reinforced rubber with tension-resistant cord
Dimensions: Exact OEM-equivalent sizing for proper tension
Mounting: Wraps around motor pulley and drum pulley
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver (depending on model)
⚠️ Safety First: Always unplug the washer before servicing to avoid electrical shock.
Steps:
Unplug the washer and remove the rear access panel.
Locate the old drive belt and remove it from the motor and drum pulleys.
Position the new XPARTCO 5304516132 belt around the drum pulley first.
Stretch the belt onto the motor pulley while rotating the drum.
Reinstall the back panel, restore power, and test wash/spin cycles.
⏱️ Time Required: 10–20 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore smooth washer performance — Add to Cart Now for a dependable, affordable repair!
XPARTCO W11266654 Washer Door Boot Outer Clamp
Description: The Outer Door Boot Seal Clamp Washer is a replacement part specific to Whirlpool-brand washing machines. Multiple washers are used behind the outer boot seal clamp to create a uniform, compressed seal around the washer door opening.
Replaces Part Number: W11266654, W10237503, WPW10237503, 4894886, AP6809210, PS12584490, W10818945.
XPARTCO DC66-00777A Washer Pulsator Cap – Compatible with Samsung Washers
Product Description
Keep your washer operating smoothly with the XPARTCO DC66-00777A Washer Pulsator Cap. This high-quality aftermarket replacement covers the central pulsator bolt, preventing water, detergent, and debris from entering the washer hub. A cracked or missing cap can lead to corrosion, noise, or imbalance during spin cycles. Replacing it with this durable XPARTCO cap restores a secure seal and helps maintain optimal washing performance.
Replaces Part Numbers
DC66-00777A, PD00025125, EAP8753312, AP5788799, 3282678, PS8753312.
Compatibility
This replacement pulsator cap fits select Samsung top-load washers.
Example compatible models include (but are not limited to): Samsung WA400PJHDWR/AA, WA422PRHDWR/AA, and WA45H7000AW/A2.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM fit and performance for Samsung washers
💧 Protective Seal – Keeps water and detergent away from the pulsator bolt area
💰 Cost-Effective Solution – Durable and affordable alternative to OEM caps
🛠️ Simple Installation – No tools required; snaps directly into place
🛡️ Fixes Common Issues – Replaces missing or damaged caps to prevent rust and noise
📐 Product Specification
Part Number: DC66-00777A
Component Type: Washer Pulsator (Washplate) Cap
Material: High-strength molded plastic
Color: Gray or silver finish (varies by batch)
Mounting: Snap-fit installation on top of pulsator bolt
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: None
⚠️ Safety First: Always unplug the washer before performing any maintenance to avoid electrical shock.
Steps:
Open the washer lid and locate the center of the pulsator (washplate).
Remove any remaining parts of the old or damaged cap.
Align the new XPARTCO DC66-00777A cap with the pulsator hub opening.
Press firmly until it clicks into place.
Verify the cap is secure before running a wash cycle.
⏱️ Time Required: Less than 5 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Protect your washer from wear and debris — Add to Cart Now for a quick, reliable fix!
5220FR2006H Washer Hot Water Inlet Valve - Compatible with LG, Kenmore
Product Description
Ensure proper water flow with the replacement 5220FR2006H Washer Hot Water Inlet Valve. This replacement water inlet valve is designed for select LG and Kenmore front-load and top-load washers, featuring one solenoid to control hot water entry into the drum. It addresses issues like no water flow, leaks, improper filling, or error codes, offering a cost-effective alternative to OEM parts.
Note: Includes one water inlet valve with one solenoid. Disconnect power and water supply before installation. Check water supply lines and valve filters for blockages to ensure optimal performance.
Replaces part numbers: 5220FR2006H, 1268123, 5220FR1280F, 5220FR2006L, 5220FR2006Q, AH3527427, EA3527427, PD00001765, EAP3527427, AP4441935, PS3527427.
Compatibility:
Compatible with models including but not limited to:
LG: WM2016CW, WM2077CW, WM2277HW, WM2455HW, WM2487HRM, WM2601HW, WM2701HV, WM2801HWA, WM3070HWA, WM3470HWA, WM8000HVA, WM9000HVA
Kenmore: 796.40272800, 796.41022900, 796.41028900
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG and Kenmore front-load and top-load washers.
💧 Specifications: replacement water inlet valve with one solenoid, 120V, 60Hz.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 20–30 minutes.
🛡️ Effective Fixes: Resolves no water flow, leaks, improper filling, or error codes.
Product Specification
Part Number: 5220FR2006H
Component Type: Washer hot water inlet valve
Material: High-grade plastic and metal
Electrical Specs: 120V, 60Hz, one solenoid.
Mounting: Screw-mounted near washer water inlet
Operating Conditions: Suitable for high-pressure water supply environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the washer from the power source and water supply before installation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your washer running smoothly today!
Add to cart now for a budget-friendly fix!
XPARTCO MDS47123602 Washer Door Boot Gasket – Compatible with LG Front-Load Washers
Product Description
Stop leaks and restore proper sealing with the XPARTCO MDS47123602 Washer Door Boot Gasket. This high-quality aftermarket replacement forms a watertight seal between the washer door and tub, preventing water from leaking during wash and spin cycles. A worn, torn, or mold-damaged gasket can lead to leaks, odors, or excessive vibration. Replacing it with this durable XPARTCO gasket provides long-lasting protection and reliable washer performance.
Replaces Part Numbers
MDS47123602, MDS64237201, MDS64237202, MDS47123612, EAP3535210, PD00028934, AH3535210, EA3535210, AP5218575, PS3535210.
Compatibility
This replacement door boot gasket fits select LG front-load washers.
Example compatible models include (but are not limited to):LG WM2650HWA, WM3470HVA, WM3570HWA, WM8000HVA, and WM3997HWA.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM fit, thickness, and sealing performance
💧 Leak-Proof Design – Forms a tight seal to prevent water escaping from the washer door
🌿 Mold-Resistant Material – High-grade rubber reduces mildew and odor buildup
🛠️ Durable Construction – Built to withstand heat, detergent, and high-spin vibration
🛡️ Fixes Common Issues – Solves leaks, mold/mildew odor, door seal tears, or water pooling
📐 Product Specification
Part Number: MDS47123602
Component Type: Washer Door Boot Gasket (Door Seal)
Material: High-strength, mold-resistant rubber
Color: Gray (standard for LG models)
Mounting: Installed between front tub and door frame using clamps
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, spring clamp tool (recommended), pliers
⚠️ Safety First: Always unplug the washer before installation to prevent electrical shock.
Steps:
Remove the washer top and front panel for access.
Release the outer retaining spring clamp and remove the old gasket edge.
Detach the inner clamp from the tub and remove the old gasket completely.
Align and install the new XPARTCO MDS47123602 gasket around the tub opening.
Reinstall inner clamp, then secure the outer clamp around the door frame.
Reassemble the washer and perform a quick rinse cycle to test for leaks.
⏱️ Time Required: 30–45 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Stop washer leaks the right way — Add to Cart Now for a durable, budget-friendly replacement!
DA32-00011E Refrigerator Temperature Sensor
Replaces Part Numbers: DA32-00011E, DA32-00006N, AP4140987, PS4138598.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
5220FR2075LCM Washer Water Valve
Three solenoid valve for cold water.
Fits LG front load washers.
Replaces Part Numbers: 5221ER1003A, 1268130, 5221ER1003C, 5221ER1003D, 5221ER1003F, AH3527452, EA3527452, AP4442608, PS3527452. 5220FR2075L, 4322702, AGM73269503, AP5986564, PS11728995.
Description: This Water Inlet Valve Assembly is a replacement part for specific Kenmore, LG washing machine models. This critical component regulates the flow of water into the washing machine tub, ensuring the proper water supply for various wash cycles and functions.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO WH05X24185 Washer Clutch
The XPARTCO WH05X24185 is an aftermarket replacement clutch for GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café models. This clutch engages and disengages the transmission during the wash and spin cycles, transferring the motor's power to spin the basket so your clothes finish damp rather than soaked.
Made of white plastic with a glossy finish, measuring approximately 3"L x 3"W x 1"H. Sold individually and does not include any other parts, such as the shift actuator (our WH03X30517 listing) that works alongside it. Common causes of failure include wear and tear over time, excessive load, or mechanical obstruction. Symptoms of a worn or failing clutch include clothes coming out wet even after a completed spin cycle, a slight burning odor during operation, or issues with spinning or agitating. It directly replaces WH05X24185, 4588013, AGE26046, AP5993402, EAP11729473, PD00043605, PS11729473.
Quick Answer
The XPARTCO WH05X24185 Washer Clutch fixes GE, Hotpoint, Haier, Monogram, and Café top-load washers where clothes come out wet after spinning, there's a slight burning odor during operation, or the washer has trouble spinning or agitating. White plastic, glossy finish, ~3"L x 3"W x 1"H. Sold individually. Replaces WH05X24185, 4588013, AGE26046, AP5993402, EAP11729473, PD00043605, PS11729473. If you also see grease pooling on the floor under the washer, that's more likely a transmission gearcase leak than this clutch — and if the agitator only slips in one direction, check the agitator bolt before assuming the clutch has failed.
Common Problems This Part Fixes
Clothes coming out wet even after a completed spin cycle
Slight burning odor during operation
Washer having trouble spinning or agitating
Reduced washer performance from clutch wear
Grinding or unusual noise tied to the transmission area
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer clutch directly replaces the following OEM and cross-reference part numbers:
WH05X24185, 4588013, AGE26046, AP5993402, EAP11729473, PD00043605, PS11729473
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This clutch is compatible with select GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café washers built on the GE platform.
Note: This clutch is commonly replaced alongside our WH03X30517 shift actuator, since the two work together in the same wash/spin transition system, but they are sold separately. If your washer also isn't switching between agitation and spin, check the actuator as well. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement clutch — engages and disengages the transmission during wash and spin
Resolves "clothes still wet," "burning odor," and "trouble spinning or agitating" symptoms
White plastic, glossy finish
Approximately 3"L x 3"W x 1"H
Direct drop-in replacement matching the original mounting
Replaces WH05X24185, 4588013, AGE26046, AP5993402, EAP11729473, PD00043605, PS11729473
Compatible with GE, Hotpoint, Haier, Monogram, and Café top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Sold individually
Product Specifications
Part Number
XPWH05X24185
OEM Part Number
WH05X24185
Part Type
Washer Clutch
Condition
Aftermarket Replacement
Color
White
Material
Plastic
Finish
Glossy
Dimensions
Approx. 3"L x 3"W x 1"H
Related Part
WH03X30517 shift actuator (sold separately)
Repair Difficulty
Moderate — some disassembly required
Quantity
1 clutch (sold individually)
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power at the outlet before beginning to cut off electricity and prevent accidental shocks. Wear work gloves. Remove the two screws at the back of the washer with a Phillips head screwdriver, then pull off the main console and carefully set it aside. Locate the access plate on the transmission side and remove the screws securing it. Take the belt off the pulley and remove the belt guard. Remove the four screws that secure the clutch and take it off from the wet end of the transmission. Install the new WH05X24185 clutch and replace the four screws. Reattach the belt, pulley, and access plate, and replace their screws. Put the main console back onto the washer and secure it with the two screws. Restore power and run a test cycle to confirm clothes are coming out properly damp at the end of the spin cycle, with no burning odor or unusual noise. Tools needed: Phillips screwdriver, socket wrench, work gloves.
Frequently Asked Questions
My clothes come out wet after the spin cycle. Is this the clutch I need?
Yes, this is one of the most common symptoms of a worn or failing clutch. Since this clutch is what engages the transmission to spin the basket at high speed, a worn clutch can slip rather than fully engaging, leaving clothes wetter than they should be at the end of the cycle. A slight burning odor during operation is another documented sign of the same wear.
I noticed grease on the floor under my washer. Is that this clutch leaking?
Not directly — grease pooling under the washer typically comes from the gearcase transmission itself rather than the clutch. If you're seeing this symptom, the transmission may need attention in addition to, or instead of, this clutch, depending on what else you're experiencing.
My agitator slips going one direction but not the other. Is that the clutch?
Not necessarily. This specific symptom — the agitator pulling fine in one direction but slipping in the other — is more often traced to a loose agitator bolt. It's worth checking and tightening that bolt first; if the problem persists, the agitator base hybrid assembly may need inspection before assuming this clutch is at fault.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the material, dimensions, and mounting configuration of the original WH05X24185 clutch used in compatible GE, Hotpoint, Haier, Monogram, and Café top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
6601EN1003D Washer Door Lock Interlock Switch
Replaces Part Numbers: 6601EN1003D, 6601ER1005A, 2651099, AH3636296, AP5594317, EA3636296, PS3636296.
This is an aftermarket part that can be used as a replacement for the OEM part.
WARNING: California’s Proposition 65 (California Residents Only)
XPARTCO EAU64082901 Washer Drain Pump Motor – for AHA75693425 – Compatible with LG & Kenmore Washers
Product Description
Restore proper draining and reliable washer operation with the XPARTCO EAU64082901 Washer Drain Pump Motor. This high-quality replacement pumps water out of the washer tub during drain and spin cycles. A failing drain pump motor can cause water not draining, standing water, slow spin cycles, or drain error codes. Replacing it with this dependable XPARTCO pump motor ensures efficient water removal and smooth washer performance.
Replaces Part Numbers
EAU64082901, PD00090792, AP6336279. EAP12750085.
Replacement Motor for Drain pump Assembly for AHA75693425, PD00068706, EAP12750085, AP6978815, PS12750085
Compatibility
This replacement washer drain pump motor fits select LG and Kenmore (LG-manufactured) front-load and top-load washers.
Example compatible models include (but are not limited to):LG WM2277HW, WM2455HW, WM3470HWAKenmore 796.40272900, 796.41472210
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM flow rate and electrical performance
💧 Efficient Water Drainage – Removes water quickly during drain and spin cycles
🔇 Quiet Operation – Smooth motor design minimizes noise and vibration
💪 Durable Construction – Built for long service life in wet environments
🛡️ Fixes Common Issues – Solves washer not draining, water left in tub, or drain error codes
📐 Product Specification
Part Number: EAU64082901
Component Type: Washer Drain Pump Motor only
Voltage: 26V
Mounting: Direct-fit pump housing installation
Connection: Electrical terminals with hose ports
Application: Drain and spin water removal
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, pliers, towel or shallow pan
⚠️ Safety First: Unplug the washer and turn off water supply before servicing.
Steps:
Disconnect power and water supply.
Access the drain pump from the front or bottom panel.
Place a towel to catch residual water.
Disconnect hoses and wiring from the old pump motor.
Install the new XPARTCO EAU64082901 pump motor.
Reconnect hoses and wiring, reassemble panels, and restore power.
Run a test drain cycle to confirm proper operation.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore proper washer draining and avoid costly water issues — Add to Cart Now for a reliable, budget-friendly repair!
