Search results for "Defrost Timer"

XPARTCO DA32-10105X Refrigerator Temperature Sensor – Compatible with Samsung and Kenmore Refrigerators Product Description Maintain consistent cooling performance with the XPARTCO DA32-10105X Refrigerator Temperature Sensor. This high-quality replacement monitors internal refrigerator temperature and communicates with the control board to regulate cooling cycles. A faulty sensor can cause temperature fluctuations, frost buildup, or over-cooling. Installing this reliable XPARTCO sensor helps restore accurate temperature readings and energy-efficient operation. Replaces Part Numbers DA32-10105X, 2030345, PD00002045, EAP4138686, AP4338786, PS4138686 Compatibility This replacement temperature sensor fits select Samsung and Kenmore refrigerators. Example compatible models include (but are not limited to): Samsung RF28HMEDBSR/AA, RF23HCEDBSR/AA, and Kenmore 795.72053.112. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM accuracy and reliability ❄️ Precision Cooling Control – Ensures stable refrigerator and freezer temperatures 💰 Budget-Friendly Fix – Provides OEM-level performance at a lower cost 🛠️ Easy Installation – Plug-in design for fast and simple replacement 🛡️ Fixes Common Issues – Solves cooling inconsistencies, frost buildup, or warm compartment problems 📐 Product Specification Part Number: DA32-10105X Component Type: Refrigerator Thermistor (Temperature Sensor) Material: Plastic sensor probe with insulated wiring harness Mounting: Clip-in or taped to evaporator wall depending on model Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, needle-nose pliers ⚠️ Safety First: Always unplug the refrigerator before performing any repairs to prevent electrical shock. Steps: Disconnect power and remove interior shelves for access. Locate the existing temperature sensor near the evaporator coil or rear wall. Unplug the old sensor from its wiring harness. Install the new XPARTCO DA32-10105X sensor and reconnect the harness. Secure the sensor in place with clips or adhesive as applicable. Reassemble interior panels and restore power. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Keep your refrigerator running efficiently — Add to Cart Now for a reliable, cost-effective repair!

Read more less

WR60X25858 Freezer Genuine OEM Evaporator Fan Motor The WR60X25858 is a genuine GE OEM freezer evaporator fan motor for GE refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, Profile, and Kenmore models. Located in the freezer compartment, this motor circulates air across the evaporator coil and out into the freezer and, on many models, the fresh food compartment, drawing heat out of the air to maintain consistent, efficient cooling throughout the appliance. Rated 13.6V DC, 0.23 amps, with fan dimensions of approximately 4.5" x 4.5" and a wiring harness and plug extending about 8.25" from the frame. Common causes of failure include worn motor bearings or electrical failure over time. Symptoms of a failing evaporator fan motor include the freezer failing to cool properly and warming up, insufficient airflow, excessive frost buildup, higher-than-normal freezer temperatures, or unusual noise — often caused by frost or ice rubbing against the fan blade as it turns. It directly replaces 239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431. Quick Answer The WR60X25858 Freezer Genuine OEM Evaporator Fan Motor fixes GE, Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators with a freezer that's warming up, insufficient airflow, excessive frost, or unusual noise from the fan area. 13.6V DC, 0.23A, ~4.5" x 4.5", 8.25" harness. Replaces 239D1371P002, 3033253, 4931166, AP5669723, AP6891698, EAP12727431, EAP7320382, PS12727431, PS7320382, U11P14MS7AA3-57A61, WR60X10340, AGE29632. If your freezer isn't cold, check the evaporator fan first — but while you're in there, cleaning frost or ice off the fan blade and vacuuming the condenser coils are worthwhile companion steps. Common Problems This Part Fixes Freezer not cooling properly, warming up Insufficient airflow through the freezer compartment Excessive frost buildup Higher-than-normal freezer temperatures Unusual noise from the fan area, including frost or ice rubbing on the blade Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This freezer evaporator fan motor directly replaces the following OEM and cross-reference part numbers: 239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This evaporator fan motor is compatible with select GE refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators built on the GE platform, including model numbers such as DFE29JSDFSS and DFE29JGDAWW. Note: GE uses several different evaporator fan motors across its refrigerator lineup, including WR60X26866 and WR60X26033 for other models. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which motor your refrigerator needs. Key Features Genuine GE OEM part — factory-specified motor design and airflow rating Circulates air across the evaporator coil to draw heat out and cool the freezer Resolves "freezer warming up," "insufficient airflow," "excessive frost," and "unusual noise" symptoms Rated 13.6V DC, 0.23 amps Approximately 4.5" x 4.5", with an 8.25" wiring harness and plug Direct drop-in replacement matching the original mounting and connections Replaces 239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431 Compatible with GE, Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance DIY-friendly repair, typically 15 to 30 minutes Product Specifications Part Number WR60X25858 Part Type Freezer Evaporator Fan Motor Condition Genuine OEM Brand GE Location Freezer compartment Voltage 13.6V DC Amperage 0.23 A Fan Dimensions Approx. 4.5" x 4.5" Harness/Plug Length Approx. 8.25" from frame Repair Difficulty Easy — 15 to 30 minutes Quantity 1 fan motor Compatible Brands GE, Hotpoint, Haier, Monogram, Café, Profile, Kenmore Installation Notes ⚠️ Unplug Refrigerator Before Starting — Clear Any Frost Or Ice From The Fan Area Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Locate the evaporator fan motor in the freezer compartment, typically behind an interior panel covering the evaporator coil assembly. If there's noticeable frost or ice buildup around the fan or coil, allow it to fully defrost before continuing — restricted airflow from ice is a common contributor to fan motor strain and noise. Remove the panel to access the fan motor, then disconnect the wiring harness from the old motor. Remove the mounting screws or clips securing the old motor and pull it free, along with the fan blade if it doesn't transfer separately. Install the new WR60X25858 in the same position, reconnect the wiring harness fully, and secure the mounting hardware. Reinstall the interior panel. While you're in this area, vacuuming out any accessible condenser coils is a good complementary maintenance step. Restore power and monitor the freezer's temperature over the next 24 hours to confirm normal, quiet operation and consistent cooling. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions My freezer isn't cold anymore. Is this the part I need? Yes, this is one of the most common causes of a freezer that won't cool. One customer specifically reached out after their freezer wasn't cold, watched a diagnostic video explaining the evaporator fan's role, and confirmed this motor was the cause before ordering the replacement. I hear a strange noise from inside my freezer. Could this be the fan motor? Yes, this is a well-documented symptom. Noise often occurs when the fan motor itself is wearing out, or when frost or ice has built up enough to rub against the spinning fan blade. Clearing any ice buildup before replacing the motor helps you confirm whether the noise was from ice contact or the motor itself. Should I do anything else while I have the freezer open for this repair? It's a good opportunity to check for and clear any frost or ice buildup around the fan and coil area, since restricted airflow can contribute to fan strain. One customer also vacuumed out the condenser coils during the same repair, which is a reasonable companion maintenance step while everything is accessible. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original motor design, voltage, and connection type of the evaporator fan motor originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine OEM W11613295 Refrigerator Condenser Fan Motor The Genuine OEM Whirlpool W11613295 is the condenser fan motor for select Whirlpool, Maytag, Kenmore and KitchenAid refrigerators. The motor runs when the compressor runs, pulling air across the condenser coils to cool the compressor and the coils. When it fails or its bearings wear out, the refrigerator may get noisy or warm up. This is the original Whirlpool part, not an aftermarket equivalent. It is sold individually. Check your model number before ordering. Quick Answer The Genuine OEM W11613295 Condenser Fan Motor replaces the condenser fan motor on a compatible refrigerator when it has failed. Replaces W11387394, W11123104, W10239053, WPW10239053, W10609117, W11117459, W10909377, W11373924, W11505534, 12825101 and 8208221. Classic symptoms: the refrigerator is noisy, or the fridge and freezer are too warm. Common Problems This Part Fixes Noisy refrigerator, such as a rattling or vibrating condenser fan Refrigerator or freezer too warm, or not cooling Fan not running or the motor overheating Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This condenser fan motor replaces or supersedes the following part numbers: W11613295, W11387394, W10239053, W10609117, W11117459, W11123104, WPW10239053, 12825101, W10909377, W11373924, W11505534, FDQR107WD, UDQR107A1, FDQG107W2, 81623ZT, 115V-60HZ 3.0W E.P., AP7196151, AWP45631, PD00083292 If your old motor shows a different number, contact our support team and we'll check whether it matches. Compatibility This condenser fan motor is listed for frost-free refrigerators from Whirlpool, Maytag, Kenmore and KitchenAid. Note: Retailers show different model lists for the numbers this motor replaces, so we have not published a model list here. Check your full model number against your parts diagram, or contact our support team and we'll verify fit before you order. Key Features Genuine OEM Whirlpool part, not an aftermarket equivalent Pulls air across the condenser coils to cool the compressor and coils Replaces eleven earlier Whirlpool motor part numbers Sold individually Product Specifications Part Number W11613295 OEM Part Number W11613295 Part Type Refrigerator Condenser Fan Motor Condition Genuine OEM Manufacturer Whirlpool Quantity 1 Motor Application Select Whirlpool-Built Refrigerators Installation Notes ⚠️ Disconnect Power Before Installing Unplug the refrigerator before you begin. The motor is at the back or bottom of the refrigerator near the condenser coils, so you will need to pull the refrigerator out and remove the back panel. Unplug the motor's electrical connector, remove the screws or brackets holding the old motor, and take it out. Install the new motor and secure it, reconnect the connector, and replace the back panel. Restore power and check that the fan runs quietly. Frequently Asked Questions My refrigerator is noisy or too warm. Is this the part I need? It can be. Check for dirt on the condenser coils and for anything blocking the fan blade first. If the fan doesn't turn freely or the bearings are noisy, replace the motor. Is this an OEM or aftermarket part? This is a genuine OEM part from Whirlpool, not an aftermarket equivalent. Does this replace my old motor number? It replaces W11387394, W11123104, W10239053, WPW10239053, W10609117, W11117459, W10909377, W11373924, W11505534, 12825101 and 8208221. If your motor shows another number, contact our support team and we'll check it. Will this fit my refrigerator? It is listed for many Whirlpool-built refrigerators. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WR60X10358 Refrigerator Condenser Fan Motor The XPARTCO WR60X10358 is an aftermarket replacement condenser fan motor, made to replace GE part WR60X10358, for select GE bottom-mount refrigerators. The motor runs the fan that blows air across the condenser coils, pulling heat away so the refrigerator does not overheat and keeps a consistent temperature. It sits in the machine compartment. This is an aftermarket replacement from XPARTCO, not a genuine GE part. It is sold individually. Check your model number before ordering. Quick Answer The XPARTCO WR60X10358 Condenser Fan Motor replaces the condenser fan motor on a compatible GE bottom-mount refrigerator when it has failed. Replaces WR60X10339. Common signs of a failing condenser fan motor: the fan is noisy or not turning, or the refrigerator runs warm. When To Replace This Part Condenser fan is noisy Condenser fan is not turning Refrigerator or freezer is running warm because the condenser is not being cooled Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This condenser fan motor is made to replace the following GE part numbers: WR60X10358, WR60X10339, 3033263, D1225X14BXCPB47, AGE29414, AP5781519, EAP8690738, PD00024607, PS8690738 If your old motor shows a different number, contact our support team and we'll check whether it matches. Compatibility This condenser fan motor is listed for GE bottom-mount refrigerators, including these examples: GE GNE26GMDDES, GNE26GGDAWW, GNE26GSDASS, GNE26GMDAES GE GFE29HGDEWW, GFE29HGDCWW, GFE29HMDDES GE DFE29JGDAWW, DFE29JMDAES, DFE29JSDESS GE PFE27KSDDSS, PYE23KSDASS, PYE23PSDASS, CYE23TSDASS Note: The models above are a sample, not a full list. GE sells many condenser fan motors with different part numbers that look alike. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering. Key Features Aftermarket replacement for the GE WR60X10358 condenser fan motor Moves air across the condenser coils to keep the refrigerator cooling efficiently Cross-references GE WR60X10339 Sold individually Product Specifications Part Number XPWR60X10358 OEM Part Number WR60X10358 Part Type Refrigerator Condenser Fan Motor Condition Aftermarket Replacement Quantity 1 Motor Application Select GE Bottom-Mount Refrigerators Installation Notes ⚠️ Disconnect Power Before Installing Unplug the refrigerator, move any food that could spoil, and wear work gloves. Remove the rear access panel to the machine compartment, note how the wiring connects, and disconnect the motor. Remove the old motor and fan blade, install the new motor, reconnect the wiring, and refit the panel. Restore power and check that the fan runs. Frequently Asked Questions My refrigerator is warm or noisy. Is this the part I need? It can be. Check the condenser coils for dust and make sure nothing is blocking the fan first. If the fan does not spin freely or the motor is noisy, replace the motor. Is this an OEM or aftermarket part? This is an aftermarket replacement from XPARTCO, made to replace GE part WR60X10358. If you specifically need a genuine GE part, contact our support team. Does this replace WR60X10339? Yes. WR60X10339 is an earlier GE number for this condenser fan motor, and this motor is made to replace both. If your motor shows another number, contact our support team and we'll check it. Will this fit my refrigerator? It is listed for select GE bottom-mount models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO W10498976 Refrigerator Water Inlet Valve Replaces WPW10498976 The XPARTCO W10498976 is an aftermarket replacement refrigerator water inlet valve assembly compatible with select Whirlpool, Maytag, KitchenAid, Kenmore, and Ikea bottom-freezer and French door refrigerators in the WRB, WRF, MBF, GX5, GB9, GB2, and related series. The water inlet valve is a solenoid-operated valve mounted on the back of the refrigerator that controls the flow of water from the household supply line to the ice maker and, on models with a door dispenser, to the water dispenser. When the solenoid coil burns out or the valve seat becomes clogged with mineral deposits, the ice maker stops producing ice, the water dispenser stops working, water trickles weakly, or water leaks from the valve body. Rated 120V, 50/60Hz, 35W solenoid, this valve measures 3-1/2"L x 2-3/4"W x 3"H and includes the valve body and mounting bracket. It connects via 1/4" inlet fitting to the household supply line and uses push-in tube fittings on the outlet side. It directly replaces WPW10498976, W10420082, W10498974, K-78200, K-78186, 2684516, 2315508, IMV-576, AP6022334, EAP11755667, PD00024636, PS11755667, WP2315576, and WV8047. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO W10498976 Refrigerator Water Inlet Valve fixes Whirlpool-family bottom-freezer and French door refrigerators where the ice maker is not making ice, the water dispenser is not working or producing only a trickle, or water is leaking from the back of the refrigerator. 120V/50-60Hz/35W solenoid, 3-1/2"L x 2-3/4"W x 3"H, includes bracket. 1/4" inlet connection. Replaces WPW10498976, W10420082, W10498974, K-78200, 2684516, AP6022334, PS11755667. Compatible with Whirlpool WRB/WRF, Maytag MBF, KitchenAid, Kenmore, and Ikea. Common Problems This Part Fixes Ice maker not producing ice or producing very small cubes due to insufficient water supply Water dispenser not working — no water flows when the lever or button is pressed Water dispenser producing only a trickle — valve partially blocked or solenoid weakening Water leaking from behind the refrigerator near the water valve Ice maker fills but overflows — valve stuck open and not closing properly Humming sound near the back of the refrigerator when requesting ice or water — solenoid energized but valve not opening No water reaching the refrigerator despite supply line being connected and pressurized Replaces Part Numbers This water inlet valve directly replaces the following OEM and cross-reference part numbers: WPW10498976, W10498976, W10420082, AWP50873, EAP11755667, PD00024636, AP6022334, PS11755667.  If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This water inlet valve is compatible with select bottom-freezer and French door refrigerators from the following brands and series: Whirlpool refrigerators — WRB322, WRB329, WRF535, WRF555, and related WRB/WRF series (French door and bottom-freezer models) Maytag refrigerators — MBF1958, MBF2258, and related MBF series KitchenAid refrigerators — select bottom-freezer and French door models Kenmore / Sears refrigerators — select Whirlpool-built models Ikea refrigerators — select models (Whirlpool-built) Other Whirlpool-platform models including GB9, GB2, GX5, GX2, ET1CH, ET8CH, IX5HH, ED22, and related series Note: Always verify your exact model number before ordering — water inlet valves are model-specific and not universal across all refrigerator configurations. Check that the supply line connection size (1/4") matches your existing supply line before purchasing. Key Features Solenoid-operated valve — opens on command from the refrigerator's control board to supply water to the ice maker and water dispenser Rated 120V, 50/60Hz, 35W — correct electrical specifications for compatible Whirlpool-family refrigerators Dimensions: 3-1/2"L x 2-3/4"W x 3"H — includes mounting bracket for direct installation 1/4" inlet connection — matches standard residential refrigerator supply line diameter Push-in outlet tube fittings — easy connection to existing water supply tubing inside the refrigerator Plastic and metal construction — durable and resistant to mineral buildup Replaces WPW10498976, W10420082, W10498974, K-78200, K-78186, 2684516, AP6022334, and over 10 additional cross-references Compatible with Whirlpool WRB/WRF series, Maytag MBF series, KitchenAid, Kenmore, and Ikea refrigerators Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number W10498976 OEM Part Number WPW10498976 Part Type Refrigerator Water Inlet Valve Assembly Condition Aftermarket Replacement Application Bottom-Freezer and French Door Refrigerators Voltage 120V AC Frequency 50/60 Hz Solenoid Wattage 35W Dimensions 3-1/2"L x 2-3/4"W x 3"H Inlet Connection 1/4 inch Color Brown / Blue / Yellow / Gray Material Plastic / Metal Includes Water valve body and mounting bracket Compatible Brands Whirlpool, Maytag, KitchenAid, Kenmore, Ikea Installation Notes ⚠️ Unplug Refrigerator and Shut Off Water Before Starting Unplug the refrigerator and shut off the household water supply valve before beginning. Place a towel and small container under the valve area to catch residual water. Pull the refrigerator away from the wall to access the back lower panel — remove the panel screws to expose the water inlet valve. Photograph the wiring harness connections and water tube connections before disconnecting. Turn off the water supply and disconnect the 1/4" supply line from the valve inlet — use an adjustable wrench, as some compression fittings may be stuck. Squeeze the plastic retaining clips on the outlet tube fittings and pull the internal water tubes free. Disconnect the wiring harness. Unscrew the mounting bracket and remove the old valve. Install the new W10498976 valve with its bracket, reconnect the internal water tubes (push until they click), reconnect the wire harness and supply line. Restore water supply and power. Run a water dispenser test and check for leaks. Tools needed: Phillips screwdriver, adjustable wrench, needle-nose pliers. Frequently Asked Questions What does the refrigerator water inlet valve do? The water inlet valve is an electrically controlled solenoid valve that opens on command from the refrigerator's control board to allow household water pressure to push water through to the ice maker fill tube or the water dispenser. When the ice maker calls for water or you press the dispenser lever, the board sends voltage to the solenoid coil, which opens the valve. When the demand is satisfied, the voltage stops, the spring closes the valve, and water flow stops. A failed solenoid coil — or a valve seat clogged with mineral deposits — prevents the valve from opening or closing correctly, causing no water, weak water, overflow, or dripping. What is the difference between W10498976 and WPW10498976? These are the same water inlet valve. WPW10498976 is the updated Whirlpool OEM part number that superseded the original W10498976. The W10420082 and W10498974 are also cross-references for this same valve from earlier production runs. This aftermarket replacement is compatible with all of these numbers. How do I know if the water inlet valve has failed vs. something else? First confirm the household water supply valve behind the refrigerator is fully open and the supply line is not kinked. Then check the water filter — a clogged filter is one of the most common causes of weak or no water flow and is mistaken for a valve failure. If both supply pressure and the filter are good, test the valve's solenoid coil with a multimeter — a working coil reads 200–500 ohms of resistance; an open circuit confirms failure. If the solenoid tests good but the valve still does not open when the control board sends voltage, the valve seat may be physically clogged with mineral deposits and the valve needs to be replaced. My ice maker is not working but my water dispenser is fine — is it the valve? Possibly — but if the water dispenser works normally, the main valve solenoid is likely functioning. On some refrigerator configurations, the ice maker and the dispenser are controlled by separate solenoid ports on the valve assembly. If only the ice maker port has failed, the dispenser can continue working while ice production stops. Test the ice maker solenoid coil separately. However, a more common cause of ice maker failure with a working dispenser is the ice maker module, freezer temperature, or ice maker shut-off arm — rule out those causes before replacing the valve. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from plastic and metal to match the electrical specifications and dimensions of the original WPW10498976 water inlet valve assembly. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine OEM AJU75152601 Washer Water Inlet Valve The Genuine OEM LG AJU75152601 is the water inlet valve assembly (also called a fill valve) for select LG and Kenmore washers. The valve controls the flow of hot and cold water into the washer. When it fails, the washer may not fill, may not stop filling, may leak, or may give no hot or cold water. This is the original LG part, not an aftermarket equivalent. It is sold individually. Check your model number before ordering, because similar LG valves look alike but can differ in size and shape. Quick Answer The Genuine OEM AJU75152601 Water Inlet Valve replaces the inlet valve on a compatible LG or Kenmore washer when it has failed. Replaces AJU73213301. Classic symptoms: the washer won't fill or won't stop filling, leaks, or gives no hot or cold water. Common Problems This Part Fixes Washer won't fill with water Washer won't stop filling Leaking water No hot water or no cold water Washer won't start Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This water inlet valve replaces or supersedes the following part numbers: 5221EA1008F, AJU73213301, AJU75152601, AH3527446, AJU75152603, EA3527446, PS3527446, ALG53778, AP6308239, PD00042814, PS12374721, TAW35618287 If your old valve shows a different number, contact our support team and we'll check whether it matches. Compatibility This water inlet valve is listed for LG and Kenmore top-load washers, including these examples: LG WT1501CW, WT1701CV, WT1701CW, WT1801HVA, WT1801HWA, WT1901CW LG WT5270CW, WT7050CV, WT7200CV, WT7200CW, WT7500CW LG WT7600HKA, WT7600HVA, WT7600HWA, WT7840CW LG 31433, 31552 Note: The models above are a sample, not a full list. LG sells similar inlet valves under other part numbers that look alike but can differ in size and shape. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering. Key Features Genuine OEM LG part, not an aftermarket equivalent Controls the flow of water into the washer Usually located at the back of the washer Sold individually Product Specifications Part Number AJU75152601 OEM Part Number AJU75152601 Part Type Washer Water Inlet Valve Assembly Condition Genuine OEM Manufacturer LG Quantity 1 Valve Application Select LG and Kenmore Top-Load Washers Installation Notes ⚠️ Disconnect Power And Water Before Installing Unplug the washer and turn off the water supply before you begin. The valve is usually at the back of the washer, so you will need to remove the top cover, which is held by snap tabs and hidden screws, so pry carefully to avoid cracking it. Note where the hoses and connectors go and disconnect them, then remove the old valve. Install the new valve in the same position, reconnect the hoses and connectors, and reassemble. Restore power and water, check for leaks, and run a test cycle. Frequently Asked Questions My washer won't fill or won't stop filling. Is this the part I need? It can be, but other parts can cause the same symptoms. Check that both water supplies are on and the hose screens are clear first. Some customers also replaced the water level pressure switch at the same time, so confirm the valve is at fault. Is this an OEM or aftermarket part? This is a genuine OEM part from LG, not an aftermarket equivalent. Does this replace AJU73213301? Retailers list AJU73213301 as a number this valve replaces. If your valve shows another number, contact our support team and we'll check it. Will this fit my washer? It is listed for many LG and Kenmore top-load models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less