WH41X22935 Washer Tub to Pump Hose
Washer Tub to Pump Hose
Replaces Part Number: WH41X22935, WH41X10163, 123C7981, 4258948, J27-763, WH41X0371, WH41X371, AP5983873, PS11721808.
Description: This Washer Tub to Pump Hose is a replacement part for select GE, Hotpoint Top-Load Washer models.
This is an aftermarket part that can be used as a replacement for the OEM part.
W11612327 Dishwasher Genuine Circulation Pump
Circulation pump and motor assembly
Replaces Part Numbers: W11612327, W11024423, W10805387, W11521436, AP7194668, PS16744935.
Description: This Pump is a Genuine component for specific Whirlpool dishwasher models. It refers to the water pump component that circulates water throughout the dishwasher during cycles. Common cause of a faulty pump can include normal wear over many uses. The continuous motor operation puts strain on internal seals and impellers. Mineral deposits from hard water can also clog pump parts over time.
ERP DD62-00067A Dishwasher Water Valve
Replaces Part Numbers:DD62-00067A, AP4341924, 1606674, PS4222444
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO DD66-00023A Dishwasher Lower Dish Rack Roller - Compatible with select Samsung models
Product Description
Restore smooth operation to your dishwasher with the XPARTCO DD66-00023A Dishwasher Lower Dish Rack Roller. This replacement roller is designed as a replacement for select Samsung dishwashers, offering a cost-effective alternative to the original. It supports the lower dish rack, ensuring it glides smoothly in and out for easy loading and unloading. This part addresses issues like the rack sticking, wobbling, or falling off the rails, often caused by worn or broken rollers.
Note: Includes (1) lower dish rack roller. Disconnect power before installation. Verify compatibility with your dishwasher model.
Replaces part numbers: DD66-00023A, PD00002184, EAP4222532, DW0023A, AP4342187, 2002711, PS4222532.
Compatibility:
Compatible with select Samsung dishwasher models, including but not limited to:
Samsung: DW80J3020US/AA-0000, DW80J3020US/AA-0001, DW80J3020US/AA-0002, DW80J3020US/AA-0003, DW80J3020US/AA-0004, DW80J3020US/AA-0005, DW80J3020US/AA-0006, DW80J3020US/AA-0007, DW80J3020US/AA-0008, DW80J3020US/AA-0009, DW80J3020US/AA-0010, DW80J3020US/AA-0011, DW80J3020US/AA-0012, DW80J3020US/AA-0013, DW80J3020US/AA-0014
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung dishwashers.
🔧 Specifications: High-quality plastic roller with metal axle.
💪 Reliable Performance: Ensures smooth gliding of the lower dish rack.
🛠️ Easy Installation: Tool-free; typically installed in 5–10 minutes.
🛡️ Effective Fixes: Resolves sticking, wobbling, or falling rack issues.
Product Specification
Part Number: XPARTCO DD66-00023A
Component Type: Dishwasher lower dish rack roller
Material: Plastic
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dishwasher from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dishwasher running smoothly today!
Add to cart now for a reliable fix!
XPARTCO DD94-01002A Dishwasher Mounting Installation Kit for Samsung.
High-quality dishwasher mounting installation kit designed to help secure compatible dishwashers properly during installation.
✓ Dishwasher Installation Part ✓ Replaces DD94-01002A ✓ Compatibility Support
Product Description
The XPARTCO DD94-01002A Dishwasher Mounting Installation Kit is used to help secure compatible dishwashers during installation. Proper mounting helps keep the dishwasher stable, aligned, and safely positioned under the countertop or cabinet opening.
Replacing missing, damaged, or worn mounting hardware can help restore a secure dishwasher installation and prevent unwanted movement during use.
Quick Answer
If your dishwasher is loose, shifting, not secured under the counter, or missing mounting hardware, the DD94-01002A dishwasher mounting installation kit may be needed.
⚠️ Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Dishwasher not secured properly
Missing dishwasher mounting hardware
Dishwasher shifting during use
Loose dishwasher installation
Damaged or worn mounting brackets
Replaces part Number
DD94-01002A, 2077601, AP4450818, ASM941007, PD00007402, EAP4222710, PS4222710.
Compatibility
This part fits select Samsung and compatible dishwasher models using part number DD94-01002A.
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Dishwasher mounting installation kit
Helps secure dishwasher in place
Supports proper dishwasher alignment
Designed for compatible dishwasher models
Quality aftermarket replacement part
Product Specifications
Brand
XPARTCO
Part Type
Dishwasher Mounting Installation Kit
Primary Part Number
DD94-01002A
Compatible Appliance Type
Dishwasher
Condition
New
Installation
Disconnect power before installation. Follow the dishwasher installation instructions and verify the unit is level, aligned, and securely mounted before use.
Troubleshooting Guide
⚠️ Disconnect power before servicing or installing the dishwasher.
Check if the dishwasher is level and properly aligned.
Inspect mounting brackets and screws for damage or missing hardware.
Confirm the dishwasher does not shift when the door is opened or closed.
Replace the mounting kit if hardware is missing, damaged, or no longer secure.
When Should You Replace This Part?
Replace the dishwasher mounting installation kit if the dishwasher is loose, shifting, not properly secured, or if the original mounting hardware is missing or damaged.
Shop With Confidence
We are a U.S.-based appliance parts retailer specializing in high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse.
✓ Fast Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
```
XPARTCO 8580309 Dishwasher Door Latch Strike Replaces WP8580309
The XPARTCO 8580309 is an aftermarket replacement door latch strike for Whirlpool-built dishwashers. This small metal component attaches at the top of the dishwasher tub and locks the door latch securely in place whenever the door is closed. It does double duty: mechanically, it's what keeps the door held shut and properly tensioned against the tub opening to maintain a watertight seal during the wash cycle, and it also acts as the actuator that trips the door switch, telling the control that the door is closed and it's safe to run.
Made from durable metal, measuring approximately 2" in length. Over years of opening and closing the door, the strike can wear down, bend from an accidental impact, or simply weaken to the point where it no longer holds the latch with enough tension. Debris buildup around the strike can also interfere with proper latching. A failing strike produces a clear set of symptoms: the dishwasher won't start because the door switch never registers as closed, the door feels loose or doesn't seal tightly when shut, or water leaks out around the door during a cycle. It directly replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, and PS11746800.
Quick Answer
The XPARTCO 8580309 Dishwasher Door Latch Strike fixes Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, and Crosley dishwashers that won't start because the door won't latch, feel loose when closed, or leak water around the door during a cycle. Metal construction, approximately 2" long. Replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, PS11746800. Package includes small parts — keep away from young children during installation.
Common Problems This Part Fixes
Dishwasher won't start because the door won't latch or the door switch never registers as closed
Door feels loose, doesn't seal tightly, or doesn't hold shut properly
Water leaking out around the door during a wash cycle
Door latch failing to catch even though the door appears closed
Visible wear, bending, or damage on the strike itself
Increased door-closing noise since the strike no longer cushions the latch properly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher door latch strike directly replaces the following OEM and cross-reference part numbers:
8580309, WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, EAP1156352 PS1156352, AWP48708, PD00004771.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door latch strike is compatible with select Whirlpool-built dishwashers across the Whirlpool family of brands, including:
Whirlpool dishwashers — DP1040X, DU1055XTSS2, DU1145XTPBA
Whirlpool GU series — GU1500XTKB0, GU1200XTKS0, GU1200XTLB3, GU2400XTPS3, GU1200XTKB0, GU1100XTLB1, GU1500XTLQ1
KitchenAid — KUDC02IRBL1, KUDI01DLBL2, KUDI01DLWH2, KUDL02IRBS3, KUDK01ILBS0, KUDK01ILBS1, KUDK01ILBS5, KUDK03ITBS1
Kenmore / Sears — 665.16512201, 665.16532200, 665.17533202, 665.17512200
Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, and Crosley dishwashers (select models)
Note: Always verify your full model number before ordering, since Whirlpool uses several different door latch strikes across its dishwasher lineup, including the separate W10544004 / WPW10544004 strike used on other models. Contact our support team with your model number if you're unsure which strike fits your dishwasher.
Key Features
Aftermarket replacement door latch strike — attaches to the top of the tub and locks the door latch in place when closed
Works as a mechanical actuator for the door switch, confirming to the control that the door is closed
Provides the door tension needed for a proper watertight seal
Resolves "won't start," "door won't latch," "loose door," and "leaking around the door" symptoms caused by strike wear or damage
Durable metal construction, approximately 2" in length
Direct drop-in replacement — mounts to the original tub location
Replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, and PS11746800
Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, and related dishwashers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
8580309
OEM Part Number
WP8580309
Part Type
Dishwasher Door Latch Strike
Condition
Aftermarket Replacement
Material
Metal
Length
Approx. 2 in.
Weight
Approx. 0.03 lbs.
Location
Top of the dishwasher tub
Function
Locks the door latch and actuates the door switch
Repair Difficulty
Easy — basic hand tools, minor disassembly
Quantity
1 door latch strike
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, Crosley
Installation Notes
⚠️ Unplug Dishwasher Or Shut Off Breaker Before Starting Unplug the dishwasher or shut off the house circuit breaker before beginning. Wear work gloves. Open the dishwasher door and locate the door latch strike mounted at the top of the tub opening, above where the door latch engages when closed. Using a flat-blade screwdriver, remove the screws securing the old strike in place, then lift it free. Position the new 8580309 strike in the same location, aligning it so the door latch will catch and engage correctly when the door is closed, and secure it with the mounting screws. Close the door and confirm the latch catches firmly and holds the door snugly against the tub with no give. Restore power and run a test cycle, checking around the door for any signs of leaking. Tools needed: flat-blade screwdriver, work gloves.
Frequently Asked Questions
My dishwasher won't start even though I closed the door. Is this the strike?
It's a strong possibility. This strike acts as the mechanical actuator for the door switch — when the door closes, the strike is what physically trips the switch to signal the control that it's safe to run. If the strike has worn down, bent, or weakened, the door may appear closed without properly triggering that switch, leaving the dishwasher unable to start even though nothing looks obviously wrong.
Water is leaking around my door during the cycle. Could that be this part?
Yes, this is a common cause. The strike provides the tension that pulls the door snugly against the tub opening to maintain a watertight seal. If it's worn or damaged, the door may close but without enough holding tension to keep the seal tight, letting water seep out around the edges during the wash.
Is this the same strike used on all Whirlpool dishwashers?
No. Whirlpool uses more than one door latch strike design across its dishwasher lineup — for example, the W10544004 / WPW10544004 strike is a separate part used on other models such as the WDF520PADM, WDT730PAHZ, and WDT720PADM. Always check your full model number before ordering to make sure you're getting the correct strike for your specific dishwasher.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the dimensions, mounting configuration, and door-tensioning function of the original WP8580309 latch strike used in compatible Whirlpool, Kenmore, KitchenAid, and related dishwashers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
154756401 Genuine Frigidaire Dishwasher Door Hinge Cable
The 154756401 is a Genuine OEM Frigidaire replacement dishwasher door hinge cable compatible with select Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Westinghouse, and Ikea dishwashers. The door hinge cable runs through a pulley system at the base of the dishwasher door and is responsible for balancing and controlling the weight of the door as it opens and closes. When a cable breaks or frays, the door drops down suddenly and heavily, opening with a loud bang — or may not hold itself up at all, straining the door hinges and latch with every use.
This is a Genuine OEM part manufactured by Frigidaire to factory specifications and directly replaces the older 154578801. It is sold as a single cable — most Frigidaire dishwashers have two door hinge cables (one on each side), and it is strongly recommended to replace both at the same time. Installs in under 30 minutes with basic hand tools.
Quick Answer
The 154756401 Genuine Frigidaire Dishwasher Door Hinge Cable fixes dishwashers where the door drops open too fast, bangs loudly when opened, doesn't stay open at a comfortable angle, or where a broken cable is visible at the door hinges. Sold individually — replace both cables at the same time. Compatible with Frigidaire, Electrolux, Kenmore, Crosley, and Ikea dishwashers. Replaces 154578801.
Common Problems This Part Fixes
Dishwasher door drops suddenly and forcefully when opened — "slams" down instead of lowering gently
Loud banging or crashing noise when opening the dishwasher door
Door does not stay open at a horizontal position — drops all the way down
Broken, frayed, or snapped door cable visible near the door hinge or base of the door
Door hinge is being damaged or strained due to missing cable tension
Uneven door opening — one side drops faster than the other
Replaces Part Numbers
This door hinge cable directly replaces the following OEM and cross-reference part numbers:
154756401, 154578801, AFR14437, PD00082115, AP7212793, PS17217958.
154756401 is the current updated part number superseding the older 154578801. Contact our support team with your model number if you need compatibility confirmation before ordering.
Compatibility
This door hinge cable is compatible with select dishwashers from the following brands:
Frigidaire dishwashers
Electrolux dishwashers
Kenmore / Sears dishwashers (Frigidaire/Electrolux-built models)
Crosley dishwashers
Gibson dishwashers
Kelvinator dishwashers
Westinghouse dishwashers
Ikea dishwashers (select models)
Important: Most Frigidaire dishwashers use two door hinge cables — one on each side. This part is sold as a single cable. It is strongly recommended to replace both cables at the same time, as the second cable is likely to fail soon after the first.
Key Features
Genuine OEM part manufactured by Frigidaire to factory specifications — guaranteed fit and performance
Balances and controls door weight as it opens and closes — prevents sudden door drops and hinge damage
Works in conjunction with the door pulley and spring system to provide smooth, controlled door movement
Current updated part number — directly supersedes 154578801
Sold individually — most models require two cables (one per side); replace both at the same time
Compatible with Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Westinghouse, and Ikea dishwashers
DIY repair — installs in under 30 minutes with basic hand tools
Product Specifications
Part Number
154756401
Supersedes
154578801
Part Type
Dishwasher Door Hinge Cable
Condition
Genuine OEM
Application
Dishwashers
Material
Metal cable
Sold As
Single cable (most models require 2 — replace both at the same time)
Compatible Brands
Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Westinghouse, Ikea
Installation Notes
⚠️ Unplug Dishwasher Before Starting Disconnect power before beginning any repair. Open the dishwasher door and remove the inner door panel by unscrewing the screws around the perimeter of the inner door. With the inner panel removed, locate the door hinge cable routing — the cable runs from a bracket near the bottom of the door, through a pulley, and connects to the door spring tension system at the base of the dishwasher. Note how the cable is routed before removing the old one. Remove the broken cable by detaching it from the anchor points at each end. Thread the new 154756401 cable through the same pulley path and re-attach it to the anchor points at both ends, ensuring proper tension. Reinstall the inner door panel. Close and open the door to verify it moves smoothly and holds itself open horizontally. Restore power and run a short cycle to confirm normal operation. Tip: Replace both cables at the same time — the second cable will likely fail soon after the first. Tools needed: Phillips screwdriver, Torx screwdriver (T20), needle-nose pliers.
Frequently Asked Questions
What does the dishwasher door hinge cable do?
The door hinge cable is a tensioned metal cable that runs through a pulley and connects to the door spring system to balance the weight of the dishwasher door as it opens and closes. Without the cable, the full weight of the door would cause it to drop suddenly and forcefully when opened, slamming down onto the floor or straining the hinges with every use. The cable provides the controlled, counterbalanced movement that allows the door to lower gently and stay open at a horizontal position for easy loading and unloading.
How many door cables does my Frigidaire dishwasher have?
Most Frigidaire dishwashers use two door hinge cables — one on the left side and one on the right side of the door. This listing is for a single cable. When one cable breaks, the other is typically close behind since both cables have endured the same amount of use. It is strongly recommended to replace both cables at the same time while the door panel is already disassembled, saving you from repeating the repair shortly after.
What is the difference between 154756401 and 154578801?
These are the same door hinge cable. 154756401 is the current updated part number that superseded the older 154578801 during a production revision. If your dishwasher's parts diagram or old cable label shows 154578801, the 154756401 is the correct current replacement to order.
Is this compatible with Electrolux and Kenmore dishwashers?
Yes — Frigidaire and Electrolux are part of the same corporate family and share many components. The 154756401 cable is compatible with select Electrolux dishwashers and with Kenmore dishwashers built on the Frigidaire/Electrolux platform. Always verify your specific model number before ordering to confirm compatibility.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Frigidaire to factory specifications. It is the exact same door hinge cable installed in compatible Frigidaire, Electrolux, and related brand dishwashers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WD08X23477 Genuine OEM GE Dishwasher Tub Seal Gasket
The WD08X23477 is a genuine GE OEM tub seal gasket designed specifically for GE dishwashers with a stainless steel tub. This gasket runs around the tub opening and creates the seal that keeps wash water contained inside the tub during the cycle rather than leaking out around the edges where the tub meets the door and surrounding cabinet structure.
Over time, this seal can flatten, harden, or develop gaps from years of heat and moisture exposure, which lets water escape past the seal instead of staying inside the tub. A worn or damaged gasket typically shows up as water leaking from underneath or around the front of the dishwasher during a cycle, dampness or pooling near the base of the unit, or visible flattening, cracking, or separation in the seal material itself. It directly replaces AP6041570 and PS11774413.
Quick Answer
The WD08X23477 Genuine OEM GE Dishwasher Tub Seal Gasket fixes GE dishwashers with a stainless steel tub that are leaking water from around the tub opening during a cycle. Replaces AP6041570, PS11774413. This gasket is specific to stainless steel tub models — it is not the plastic tub/door gasket used on other GE dishwasher designs, such as WD08X21894 or WD08X23476.
Common Problems This Part Fixes
Water leaking from underneath or around the front of the dishwasher during a cycle
Dampness or pooling near the base of the dishwasher after running
Visible flattening, hardening, or cracking of the seal around the tub opening
Gaps or separation in the gasket where it meets the tub frame
Leak that appears intermittently, worse on longer or hotter cycles
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher tub seal gasket directly replaces the following OEM and cross-reference part numbers:
WD08X23477, WD08X22095, WD08X20675, 4466531, WD08X20591, AGE24098, AP6041570, EAP11774413, PD00052582, PS11774413
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This tub seal gasket is compatible with select GE dishwashers equipped with a stainless steel tub, and also fits select Hotpoint, Haier, Monogram, and Café dishwashers built on the same GE platform.
Note — stainless steel tub only, and verify fit carefully: This gasket is designed specifically for GE's stainless steel tub design and is a different part from the gaskets used on plastic tub GE dishwashers (such as WD08X21894 or WD08X23476). Additionally, this seal has a documented fitment sensitivity — at least one customer has reported that on their unit, the older original seal had roughly 2 extra inches of material at the bottom that this replacement did not match, resulting in a persistent minor leak even after installation. Confirm your dishwasher has a stainless steel tub and verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine GE OEM part — factory-specified for stainless steel tub dishwashers
Seals the tub opening to keep wash water contained during the cycle
Resolves "water leaking from the front or underneath," "dampness near the base," and "flattened or cracked seal" symptoms
Durable material designed to withstand repeated high-humidity, high-temperature cycles
Direct drop-in replacement — fits the original tub opening groove
Replaces AP6041570 and PS11774413
Compatible with GE, Hotpoint, Haier, Monogram, and Café stainless steel tub dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WD08X23477
Part Type
Dishwasher Tub Seal Gasket
Condition
Genuine OEM
Brand
GE
Application
Stainless Steel Tub Dishwashers
Function
Seals the tub opening to prevent water leaks during wash cycles
Quantity
1 tub seal gasket
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Dishwasher And Shut Off Water Before Starting — Verify Seal Length Against Your Original Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Access to the tub opening seal is typically from the front of the unit with the door open, though some models may require removing the door or surrounding trim to fully access the gasket channel. Before removing the old seal, take note of its full length and how it seats into the groove around the tub opening — some customers have found the replacement seal shorter than the original at one section, so compare the two side by side before discarding the old one. Carefully pull the old gasket free from its retaining groove, working around the full perimeter. Press the new WD08X23477 gasket into the same groove, working around the full perimeter and ensuring it seats evenly with no twists, gaps, or areas where it's pulled too tight. Run your fingers along the full seal after installation to confirm even, consistent contact with no visible gaps. Restore water and power, then run a test cycle and check underneath and around the front of the unit for any signs of leaking. Tools needed: flat-blade screwdriver (model-dependent access), work gloves.
Frequently Asked Questions
How do I know if my dishwasher has a stainless steel tub or a plastic tub?
Open the dishwasher door and look at the interior tub walls — a stainless steel tub has a visible metallic finish, while a plastic tub is typically a solid plastic color (often white, gray, or black) with no metallic sheen. This gasket is designed specifically for the stainless steel tub design; plastic tub models use a different gasket. If you're not sure, check your model number against your appliance's documentation or contact our support team.
I installed the new seal but I'm still seeing a small leak. What should I check?
This has been reported by at least one customer, who found their original seal had extra material at the bottom that this replacement didn't fully match, resulting in a persistent minor leak. Before assuming the gasket itself is faulty, run your fingers around the entire seal after installation to check for any spot where it isn't making even, firm contact — pay particular attention to the bottom section. If a specific area isn't sealing, it may need to be pressed more firmly into its groove, or in rare cases, your particular tub design may require a different seal than expected. Contact our support team with your model number if the leak persists after a careful reinstall.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original material, profile, and groove fit of the tub seal gasket originally installed in your stainless steel tub dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
4 Pack - XPARTCO DD66-00023A Dishwasher Lower Dish Rack Roller - Compatible with select Samsung models
Product Description
Restore smooth operation to your dishwasher with the XPARTCO DD66-00023A Dishwasher Lower Dish Rack Roller. This replacement roller is designed as a replacement for select Samsung dishwashers, offering a cost-effective alternative to the original. It supports the lower dish rack, ensuring it glides smoothly in and out for easy loading and unloading. This part addresses issues like the rack sticking, wobbling, or falling off the rails, often caused by worn or broken rollers.
Note: Includes (1) lower dish rack roller. Disconnect power before installation. Verify compatibility with your dishwasher model.
Replaces part numbers: DD66-00023A, PD00002184, EAP4222532, DW0023A, AP4342187, 2002711, PS4222532.
Compatibility:
Compatible with select Samsung dishwasher models, including but not limited to:
Samsung: DW80J3020US/AA-0000, DW80J3020US/AA-0001, DW80J3020US/AA-0002, DW80J3020US/AA-0003, DW80J3020US/AA-0004, DW80J3020US/AA-0005, DW80J3020US/AA-0006, DW80J3020US/AA-0007, DW80J3020US/AA-0008, DW80J3020US/AA-0009, DW80J3020US/AA-0010, DW80J3020US/AA-0011, DW80J3020US/AA-0012, DW80J3020US/AA-0013, DW80J3020US/AA-0014
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung dishwashers.
🔧 Specifications: High-quality plastic roller with metal axle.
💪 Reliable Performance: Ensures smooth gliding of the lower dish rack.
🛠️ Easy Installation: Tool-free; typically installed in 5–10 minutes.
🛡️ Effective Fixes: Resolves sticking, wobbling, or falling rack issues.
Product Specification
Part Number: XPARTCO DD66-00023A
Component Type: Dishwasher lower dish rack roller
Material: Plastic
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dishwasher from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dishwasher running smoothly today!
Add to cart now for a reliable fix!
W11087376 Dishwasher Genuine OEM Pump and Motor Assembly
Fits specific Whirlpool, Maytag, Kenmore Dishwasher models
Description: This Dishwasher Pump & Motor is an OEM replacement part for specific Whirlpool dishwasher models. As the main component for water circulation, it contains both the water pump and motor required to power it.
Replaces Part Numbers:W11087376, W10917114, 4534143, AP6237961, PS12074533.
California Residents only
WARNING: California’s Proposition 65
(2 Pack) WD01X21740 Dishwasher Mounting Bracket - Compatible with GE, Hotpoint, RCA
Product Description
Secure your dishwasher with the XPARTCO WD01X21740 Dishwasher Mounting Bracket. This high-quality replacement part is designed for select GE, Hotpoint, RCA, and other compatible dishwashers, ensuring a stable connection to the countertop or cabinet to prevent tipping during loading or unloading. Made of durable galvanized iron, it matches OEM standards for fit and performance, addressing issues like loose or wobbly dishwashers.
Note: Includes one mounting bracket. Disconnect power before installation. Two brackets are typically required per dishwasher.
Replaces part numbers: WD01X21740, WD01X10598, 4179435, PD00026672, EAP11700868, AP5981620, PS11700868.
Compatibility:
Compatible with models including but not limited to:
GE: ADT521PGFOBS, CDT725SSFOSS, CDT765SSF1SS, CDT765SSFOSS, GDF510PGD0BB, GDF510PGD0WW, GDF510PGJ0BB, GDF510PGJ0WW, GDF510PGM0BB, GDF510PGM0WW, GDF510PSD0SS, GDF510PSJ0SS, GDF510PSM0SS, GDF520PGD0BB, GDF520PGD0CC, GDF520PGD0WW, GDF520PGJ0BB, GDF520PGJ0CC, GDF520PGJ0WW, GDF520PSF0SS, GDF520PSJ0SS, GDF540HGD0BB, GDF540HGD0WW, GDF540HGJ0BB, GDF540HGJ0WW, GDF540HSD0SS, GDF540HSJ0SS, GDF570SGD0BB, GDF570SGF0BB, GDF570SGF0CC, GDF570SGF0WW, GDF570SGJ0BB, GDF570SGJ0CC, GDF570SGJ0WW, GDF570SSF0SS, GDF570SSJ0SS, GDT530PGD0BB, GDT530PGD0WW, GDT530PSD0SS, GDT535PGJ0BB, GDT535PGJ0WW, GDT535PSJ0SS, GDT545PGJ0BB, GDT545PGJ0WW, GDT545PSJ0SS, GDT550HGD0BB, GDT550HGD0WW, GDT550HSD0SS
Hotpoint, RCA: (select models, verify compatibility)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select GE, Hotpoint, RCA, and other compatible dishwashers.
🔐 Specifications: High-quality galvanized iron mounting bracket.
💪 Reliable Performance: Durable construction ensures stable dishwasher mounting and long-lasting use.
🛠️ Easy Installation: Requires screwdriver; typically installed in 5–10 minutes.
🛡️ Effective Fixes: Prevents dishwasher tipping, resolves loose or wobbly installations.
Product Specification
Part Number: XPARTCO WD01X21740
Component Type: Dishwasher mounting bracket
Material: Galvanized iron
Mounting: Screw-mounted to countertop or cabinet
Operating Conditions: Suitable for household dishwasher environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dishwasher from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dishwasher secure today!
Add to cart now for a reliable fix!
XPARTCO DD31-00016A Dishwasher Drain Pump Motor – Compatible with Samsung Dishwashers
Product Description
Restore proper water drainage and dependable dishwasher performance with the XPARTCO DD31-00016A Dishwasher Drain Pump Motor. This high-quality aftermarket replacement motor removes wastewater from the dishwasher tub during drain cycles. A failing drain pump motor can cause standing water at the bottom of the tub, drainage error codes, unusual noises, or incomplete cycles. Replacing it with this reliable XPARTCO pump motor helps ensure smooth draining and consistent wash performance.
XPARTCO provides cost-effective aftermarket appliance parts engineered to match original fit and function.
Replaces Part Numbers
DD31-00016A, 113121, 4000925, PD00036475, EAP9606350, AP5917178, PS9606350
Compatibility
This replacement dishwasher drain pump motor fits select Samsung dishwashers.
Common compatible models include (but are not limited to):
Samsung DW80J3020US
Samsung DW80K5050US
Always verify your dishwasher’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM fit and drainage performance
💧 Efficient Water Removal – Restores proper draining during cycles
🔇 Quiet Operation – Helps reduce humming or grinding noises
🧩 Direct-Fit Design – Installs without modification
💰 Cost-Effective Repair – Affordable alternative to OEM drain pump motors
📐 Product Specification
Part Number: DD31-00016A
Component Type: Dishwasher Drain Pump Motor
Voltage: 120V AC
Application: Dishwasher drainage system
Mounting: Twist-lock or screw-mounted (model dependent)
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, pliers
⚠️ Safety First: Disconnect power at the breaker and shut off water supply before servicing the dishwasher.
Basic Steps:
Disconnect dishwasher power and water supply.
Remove the lower access panel.
Locate and disconnect the drain pump motor.
Remove mounting screws or release the twist-lock mechanism.
Install the new XPARTCO DD31-00016A pump motor.
Reconnect wiring and secure mounting.
Reassemble panels, restore power, and run a test cycle.
⏱️ Time Required: 30–45 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore proper dishwasher draining and prevent water buildup — Add to Cart Now for a dependable, budget-friendly repair!
