Search results for "dishwasher water"

154246801 Dishwasher Genuine OEM Sump Gasket Description: This Dishwasher fill valve assembly is an OEM replacement part for specific Whirlpool brand dishwasher models. It is responsible for controlling the water flow into the dishwasher during the wash or rinse cycles. This part is typically located at the back or bottom of the appliance, where the water supply hoses connect. The fill valve assembly ensures that the appliance receives the correct amount of water while regulating water pressure and preventing overflow. Replaces Part Number: 154246801, 419205, AH420465, EA420465, AP2109100, PS420465.       California Residents only WARNING: California’s Proposition 65 

Read more less

W10195039 Dishwasher Float Switch replaces WPW10195039 - Compatible with Whirlpool, KitchenAid, Maytag, Amana, Jenn-Air, Inglis, Kenmore Dishwashers Product Description Protect your dishwasher from overfilling with the replacement W10195039 Dishwasher Float Switch. This high-quality float switch, designed for Whirlpool, KitchenAid, Maytag, Amana, Jenn-Air, Inglis, and Kenmore dishwashers, monitors water levels and signals the water inlet valve to shut off when the water reaches the appropriate height, preventing overflows and potential water damage. Made from durable plastic and copper with a plunger actuator, this switch (6A, 125/250VAC) addresses issues like overfilling, under-filling, or water inlet valve malfunctions. Note: Includes one float switch. Disconnect power before installation.  Replaces part numbers: WPW10195039, W10195039, W10734532, 1872053, MS10-06, PD00002753, EAP11750031, AP6016738, PS11750031. Compatibility: Compatible with models including but not limited to: Whirlpool: ADB1500ADB1, ADB1500ADS1, ADB1500ADW1, 7WDF530PAYM2 Kenmore: 66512093K210, 66512413N410, 66512723K310, 66513002N510, 66514742N511 KitchenAid: KDFE204ESS0, KUDE20FXBL3, KUDE40FXWH5 Maytag, Amana, Jenn-Air, Inglis: Models requiring W10195039 or compatible float switches Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, KitchenAid, Maytag, Amana, Jenn-Air, Inglis, and Kenmore dishwasher models. 🔥 Specifications: replacement float switch, 6A, 125/250VAC, normally open, plunger actuator, plug-in connector, 2-way circuit, plastic/copper construction, 2" x 1" x 2", panel mount. 💰 Cost-Effective Alternative: replacement switch offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires screwdriver, flashlight, work gloves; typically installed in 30–60 minutes. 🛡️ Reliable Fixes: Resolves issues like dishwasher overfilling, under-filling, water inlet valve not shutting off, or error codes related to water level. Installation Notes: Safety First: Disconnect the dishwasher from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your dishwasher running safely and efficiently today! Add to cart now for a budget-friendly fix!

Read more less

XPARTCO WD8X227 Dishwasher Corner Baffle (Right Side) 📝 Product Description Restore proper water flow and prevent leaks with the XPARTCO WD8X227 Dishwasher Corner Baffle (Right Side). This high-quality aftermarket replacement helps direct water spray inside the dishwasher tub while sealing the corner area to prevent water from escaping during wash cycles. ⚡ Quick Answer If your dishwasher is leaking from the front corner or water is spraying incorrectly inside the tub, the WD8X227 corner baffle may be damaged or missing. Replacing it restores proper water direction and leak protection. 🔄 Replaces Part Numbers Replaces OEM part number: WD8X227, 2364, WD08X0196, WD08X0227, WD8X196, EAP263963, AGE25283, PD00008225, AH263963, EA263963, AP2038859, PS263963. 🔧 Compatibility This corner baffle is compatible with many GE, Hotpoint, and other GE-manufactured dishwashers. ✔️ GE Dishwashers ✔️ Hotpoint Dishwashers ✔️ GE Profile Dishwashers Always verify your appliance model number before ordering. 🛠️ Common Problems This Part Fixes ❌ Dishwasher leaking from front corner ❌ Water escaping near door edge ❌ Improper water spray inside tub ❌ Missing or damaged corner seal ✨ Key Features ✔️ Right-side corner baffle design ✔️ Helps direct water flow correctly ✔️ Prevents corner leaks ✔️ Durable, high-quality replacement 📊 Product Specification Part Number: WD8X227 Part Type: Dishwasher Corner Baffle Brand: XPARTCO Condition: New OEM / Aftermarket: Aftermarket Position: Right Side ⏳ When Should You Replace This Part? Replace this baffle if you notice water leaking from the corner of the dishwasher door, improper spray patterns, or if the original part is cracked, missing, or worn. ⚠️ Installation Notes ⚠️ Disconnect power before installation. Remove the damaged baffle and install the new one securely in the right-side corner position. ❓ Frequently Asked Questions 🔹 What does a corner baffle do?It directs water flow and prevents leaks from the dishwasher door corners. 🔹 Will this fit my dishwasher?This part fits many GE and compatible dishwashers. Always verify your model number. 🔹 What are signs of a bad baffle?Water leaks from the corner, poor spray direction, or visible damage. 🔹 Is this left or right side?This is the right-side corner baffle. 🛒 Shop With Confidence Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality aftermarket parts. We offer fast shipping and expert support. ✔️ Fast Shipping✔️ Quality Tested Parts✔️ Compatibility Support

Read more less

W11497943 Dishwasher Genuine Drain Pump Motor Replaces Part Numbers: W11497943, AP6994646, PS16221213, W11412663.   Description: This Drain Pump Motor is a Genuine OEM component for select Maytag, Kenmore, Whirlpool dishwasher models. This electric motor powers the drain pump to empty wash water from the tub at the end of cycles. Common causes of a bad pump motor include wear over extended use, moisture damage degrading electronics, or electrical faults from voltage fluctuations.

Read more less

XPARTCO 8269145 Dishwasher Mounting Bracket (Pack of 2) – Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana Dishwashers Product Description Securely mount your dishwasher with the XPARTCO 8269145 Dishwasher Mounting Bracket (Pack of 2). These brackets are designed to fasten your dishwasher to the countertop, cabinet, or side panel to prevent shifting during use. Perfect for installations where stability is critical, this kit provides a reliable and cost-effective replacement solution. Replaces Part Numbers WP8269145, 8269145, PD00002628, EAP11745496, AP6012289, PS11745496, WP8269145VP. Compatibility These mounting brackets are compatible with select Whirlpool, Kenmore, KitchenAid, Maytag, and Amana dishwashers. Example compatible models include (but are not limited to): Whirlpool WDF520PADM7, KitchenAid KUDS30IXBL8, Kenmore 665.13293K114. Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Broad Compatibility – Works with Whirlpool, Kenmore, KitchenAid, Maytag, and Amana dishwashers 🔧 Secure Mounting – Keeps dishwasher firmly attached to cabinets or countertop 💰 Cost-Effective Alternative – OEM-equivalent quality at a lower price 🛠️ Easy Installation – Installs in minutes with standard tools 📦 Value Pack – Includes 2 brackets for a complete repair or installation 📐 Product Specification Part Number: 8269145 Component Type: Dishwasher Mounting Bracket (Pack of 2) Material: Heavy-duty metal construction Mounting: Attaches to countertop, side cabinet, or panel Operating Conditions: Standard dishwasher installations Compliance: OEM-equivalent performance standards 🛠️ Installation Notes Tools Needed: Phillips screwdriver, drill (if required) ⚠️ Safety First: Always disconnect power before working on your dishwasher to avoid electrical shock. Steps: Unplug dishwasher and turn off water supply. Open dishwasher door and locate mounting positions. Position bracket at the top or side of dishwasher frame. Secure bracket with screws to the cabinet or countertop. Reconnect power, turn on water, and test installation. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Secure your dishwasher properly with this budget-friendly fix — Add to Cart Now for fast, reliable installation!

Read more less

XPARTCO 8580309 Dishwasher Door Latch Strike Replaces WP8580309 The XPARTCO 8580309 is an aftermarket replacement door latch strike for Whirlpool-built dishwashers. This small metal component attaches at the top of the dishwasher tub and locks the door latch securely in place whenever the door is closed. It does double duty: mechanically, it's what keeps the door held shut and properly tensioned against the tub opening to maintain a watertight seal during the wash cycle, and it also acts as the actuator that trips the door switch, telling the control that the door is closed and it's safe to run. Made from durable metal, measuring approximately 2" in length. Over years of opening and closing the door, the strike can wear down, bend from an accidental impact, or simply weaken to the point where it no longer holds the latch with enough tension. Debris buildup around the strike can also interfere with proper latching. A failing strike produces a clear set of symptoms: the dishwasher won't start because the door switch never registers as closed, the door feels loose or doesn't seal tightly when shut, or water leaks out around the door during a cycle. It directly replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, and PS11746800. Quick Answer The XPARTCO 8580309 Dishwasher Door Latch Strike fixes Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, and Crosley dishwashers that won't start because the door won't latch, feel loose when closed, or leak water around the door during a cycle. Metal construction, approximately 2" long. Replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, PS11746800. Package includes small parts — keep away from young children during installation. Common Problems This Part Fixes Dishwasher won't start because the door won't latch or the door switch never registers as closed Door feels loose, doesn't seal tightly, or doesn't hold shut properly Water leaking out around the door during a wash cycle Door latch failing to catch even though the door appears closed Visible wear, bending, or damage on the strike itself Increased door-closing noise since the strike no longer cushions the latch properly Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dishwasher door latch strike directly replaces the following OEM and cross-reference part numbers: 8580309, WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, EAP1156352 PS1156352, AWP48708, PD00004771. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This door latch strike is compatible with select Whirlpool-built dishwashers across the Whirlpool family of brands, including: Whirlpool dishwashers — DP1040X, DU1055XTSS2, DU1145XTPBA Whirlpool GU series — GU1500XTKB0, GU1200XTKS0, GU1200XTLB3, GU2400XTPS3, GU1200XTKB0, GU1100XTLB1, GU1500XTLQ1 KitchenAid — KUDC02IRBL1, KUDI01DLBL2, KUDI01DLWH2, KUDL02IRBS3, KUDK01ILBS0, KUDK01ILBS1, KUDK01ILBS5, KUDK03ITBS1 Kenmore / Sears — 665.16512201, 665.16532200, 665.17533202, 665.17512200 Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, and Crosley dishwashers (select models) Note: Always verify your full model number before ordering, since Whirlpool uses several different door latch strikes across its dishwasher lineup, including the separate W10544004 / WPW10544004 strike used on other models. Contact our support team with your model number if you're unsure which strike fits your dishwasher. Key Features Aftermarket replacement door latch strike — attaches to the top of the tub and locks the door latch in place when closed Works as a mechanical actuator for the door switch, confirming to the control that the door is closed Provides the door tension needed for a proper watertight seal Resolves "won't start," "door won't latch," "loose door," and "leaking around the door" symptoms caused by strike wear or damage Durable metal construction, approximately 2" in length Direct drop-in replacement — mounts to the original tub location Replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, and PS11746800 Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, and related dishwashers Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number 8580309 OEM Part Number WP8580309 Part Type Dishwasher Door Latch Strike Condition Aftermarket Replacement Material Metal Length Approx. 2 in. Weight Approx. 0.03 lbs. Location Top of the dishwasher tub Function Locks the door latch and actuates the door switch Repair Difficulty Easy — basic hand tools, minor disassembly Quantity 1 door latch strike Compatible Brands Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, Crosley Installation Notes ⚠️ Unplug Dishwasher Or Shut Off Breaker Before Starting Unplug the dishwasher or shut off the house circuit breaker before beginning. Wear work gloves. Open the dishwasher door and locate the door latch strike mounted at the top of the tub opening, above where the door latch engages when closed. Using a flat-blade screwdriver, remove the screws securing the old strike in place, then lift it free. Position the new 8580309 strike in the same location, aligning it so the door latch will catch and engage correctly when the door is closed, and secure it with the mounting screws. Close the door and confirm the latch catches firmly and holds the door snugly against the tub with no give. Restore power and run a test cycle, checking around the door for any signs of leaking. Tools needed: flat-blade screwdriver, work gloves. Frequently Asked Questions My dishwasher won't start even though I closed the door. Is this the strike? It's a strong possibility. This strike acts as the mechanical actuator for the door switch — when the door closes, the strike is what physically trips the switch to signal the control that it's safe to run. If the strike has worn down, bent, or weakened, the door may appear closed without properly triggering that switch, leaving the dishwasher unable to start even though nothing looks obviously wrong. Water is leaking around my door during the cycle. Could that be this part? Yes, this is a common cause. The strike provides the tension that pulls the door snugly against the tub opening to maintain a watertight seal. If it's worn or damaged, the door may close but without enough holding tension to keep the seal tight, letting water seep out around the edges during the wash. Is this the same strike used on all Whirlpool dishwashers? No. Whirlpool uses more than one door latch strike design across its dishwasher lineup — for example, the W10544004 / WPW10544004 strike is a separate part used on other models such as the WDF520PADM, WDT730PAHZ, and WDT720PADM. Always check your full model number before ordering to make sure you're getting the correct strike for your specific dishwasher. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the dimensions, mounting configuration, and door-tensioning function of the original WP8580309 latch strike used in compatible Whirlpool, Kenmore, KitchenAid, and related dishwashers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

00770657 Genuine OEM Bosch Dishwasher Silverware / Cutlery Drawer The 00770657 is a genuine Bosch OEM cutlery drawer — a dedicated third-rack silverware caddy that sits in the upper interior of the dishwasher tub, above the top rack, on select Bosch dishwashers equipped with a third rack add-on compartment. Rather than loading silverware into a basket down in the lower rack, this drawer holds forks, spoons, and knives flat in their own dedicated level, laid out individually with room around each piece so water and detergent can reach every surface. It rides on durable rollers along rails built into the tub, sliding smoothly in and out for loading and unloading, and its position at the top of the tub gives it a clear, unobstructed line to the upper spray arm for targeted cleaning. The tray and support grid inside the drawer are open enough to let water flow freely through while still keeping utensils separated and organized. Because it's a lightweight tray sitting in a hot, wet, chemically active environment for years, common failure points include a metal frame that rusts through and eventually collapses under its own weight, plastic that becomes brittle or begins visibly disappearing from years of heat exposure, and dividers that crack or break, letting silverware jumble together. It directly replaces AP5788109, 00689507, 3279853, and PS8747441. As a genuine OEM part, the 00770657 is manufactured by Bosch to factory specifications — guaranteed fit, materials, and performance. Quick Answer The 00770657 Genuine OEM Bosch Dishwasher Silverware / Cutlery Drawer fixes Bosch (and compatible Thermador, Gaggenau, and select Kenmore) dishwashers with a third-rack cutlery drawer that has rusted through, has cracked or broken dividers, has become gummy or sticky and won't slide smoothly, or has cracks exposing silverware to the heating element below. Rides on rollers for smooth in-and-out extension. Replaces AP5788109, 00689507, 3279853, PS8747441. This is the roller-equipped cutlery drawer — a similar-looking companion part, 00770656, is a different drawer design without rollers, so double-check which one your dishwasher uses. Common Problems This Part Fixes Metal frame of the cutlery drawer rusted through or visibly corroding Drawer frame collapsing or sagging under the weight of silverware Missing or broken dividers letting silverware commingle instead of staying separated Drawer glides that have become gummy or sticky from food residue buildup, obstructing smooth movement Cracks or holes in the drawer exposing silverware to direct contact with the heating element Plastic that has become brittle, discolored, or is visibly disappearing after years of heat exposure Silverware not getting fully clean due to poor spray coverage from a warped or damaged drawer Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dishwasher cutlery drawer directly replaces the following OEM and cross-reference part numbers: 00770657, AP5788109, 00689507, 3279853, ABS12031, EAP8747441, PD00043732, PS8747441 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This cutlery drawer is compatible with select Bosch dishwashers equipped with a third rack add-on compartment, and is also compatible with Thermador, Gaggenau, and select Kenmore dishwashers configured with a triple-rack setup, including model numbers such as: SHE68T52UC, SHE68T55UC, SHE68T56UC, SHE68TL5UC SHE863WF5N, SHE863WF6N SHP65T56UC, SHP65TL2UC SHV68T53UC, SHV68TL3UC, SHV863WD3N SHVM63W53N, SHXM63W55N, SHXM63WS5N Each of these models spans multiple production suffixes (such as /01, /02, /07, and /09) — check your full model and production number for exact confirmation. Note — check for rollers: This drawer rides on rollers. A similar-looking companion part, 00770656, is a separate cutlery drawer design used on other Bosch/Thermador/Gaggenau models without the roller mechanism. The two are not interchangeable. Check whether your existing drawer slides on visible rollers before ordering, and always verify your full model and production number. Contact our support team with your model number if you're unsure which drawer fits your dishwasher. Key Features Genuine Bosch OEM part — factory-specified frame, grid, and roller mechanism Dedicated third-rack cutlery drawer positioned above the top rack for optimal spray-arm targeting Resolves "rusted frame," "broken dividers," "sticky glides," and "cracked drawer" symptoms caused by wear and corrosion Multi-level basket layout keeps silverware separated for full surface exposure to wash spray Rides smoothly on rollers for easy extension and retraction when loading and unloading Open tray and support grid design allows water and detergent to flow through freely Direct drop-in replacement — no tools required, simply slides into place on existing rails Replaces AP5788109, 00689507, 3279853, and PS8747441 Compatible with Bosch, Thermador, Gaggenau, and select Kenmore third-rack dishwashers Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number 00770657 Part Type Dishwasher Third-Rack Cutlery / Silverware Drawer Condition Genuine OEM Brand Bosch Location Upper interior of the tub, above the top rack Mounting Rides on rollers along built-in tub rails Design Multi-level basket grid with open tray for water flow Repair Difficulty Very Easy — no tools required Quantity 1 cutlery drawer Compatible Brands Bosch, Thermador, Gaggenau, select Kenmore Installation Notes This is one of the simplest repairs in the entire dishwasher — no tools, no wiring, and no water lines to disconnect. Open the dishwasher door fully. Locate the existing cutlery drawer at the top of the tub, above the upper rack, and slide it forward and out along its rails until it clears the cabinet. Line up the new 00770657 drawer with the same rollers and rails, and slide it in until it seats fully at the back of the tub. Close the door and run a cycle to confirm the drawer sits securely and doesn't rattle or shift during operation. Frequently Asked Questions Does my drawer use rollers, or is it the other style? Slide your existing drawer out partway and look underneath or along the sides — this 00770657 drawer rides on visible roller wheels along the tub rails. If your drawer instead has a simpler glide track with no rollers, you likely have the companion part, 00770656, which is a different design used on other models. The two aren't interchangeable, so it's worth confirming before ordering. My drawer's metal frame has rusted through. Is that just cosmetic, or should I replace it? It's worth replacing rather than living with it. Once the metal frame starts rusting through, it typically continues to weaken and can eventually collapse under the weight of loaded silverware, sometimes suddenly. Customers who've dealt with this describe the original frame rusting to the point of failure over time — replacing it before it fully gives out avoids a mid-cycle collapse and keeps your utensils properly organized and exposed to the wash spray. Do I need any tools to install this? No. This is a genuinely tool-free repair — slide the old drawer out along its rails, then slide the new one in until it seats. Customers consistently describe this as one of the easiest dishwasher parts to swap. I see cracks or holes in my drawer near the bottom. Is that a safety concern? It can be, depending on where the damage is. If cracks or holes are positioned where silverware could shift down and make direct contact with the dishwasher's heating element, that's worth addressing rather than ignoring, since it can affect both the cleaning process and the condition of your utensils over repeated cycles. Replacing a cracked or holed drawer resolves this. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Bosch to factory specifications — guaranteed fit, materials, and performance. It matches the original roller mechanism, basket grid layout, and dimensions of the cutlery drawer originally installed in your third-rack-equipped Bosch, Thermador, Gaggenau, or compatible Kenmore dishwasher. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 165256 Dishwasher Float Switch Replaces 00165256 Product Overview The XPARTCO 165256 Dishwasher Float Switch Replaces 00165256 is designed to monitor water levels inside the dishwasher and prevent overfilling. This float switch detects rising water levels and signals the control system to stop filling, protecting your appliance from leaks and water damage. Quick Answer If your dishwasher is overfilling, not filling correctly, or leaking due to excess water, the 165256 float switch may be faulty. Replacing it restores proper water level control and prevents overflow issues. Replaces Part Numbers Replaces OEM part number: 00165256, 165256, 935359, EAP8697040, ABS10088, PD00035415, AH3439096, EA3439096, PS3439096, AP2802373, PS8697040. Compatibility This dishwasher float switch is compatible with select Bosch, Thermador, and other compatible dishwashers. Bosch Dishwashers Thermador Dishwashers Compatible European-style Dishwashers Always verify your appliance model number before ordering. Common Problems This Part Fixes Dishwasher overfilling Water leaking due to excess fill Incorrect water level detection Dishwasher not filling properly Key Features Monitors dishwasher water level Prevents overfilling and leaks High-quality aftermarket replacement Reliable and durable construction Product Specifications Part Number: 165256 Part Type: Dishwasher Float Switch Brand: XPARTCO Condition: New OEM / Aftermarket: Aftermarket Application: Dishwasher Water Level Control Troubleshooting Guide Dishwasher overfills → Faulty float switch Water keeps filling → Float switch stuck or failed Dishwasher won’t fill → Switch not detecting properly When Should You Replace This Float Switch? Replace this float switch if your dishwasher is overfilling, leaking, or not detecting correct water levels. Installation Notes ⚠️ Disconnect power and water supply before installation. Access the float switch inside the tub area and install securely according to your dishwasher model. Related Parts Water Inlet Valve Dishwasher Float Assembly Control Board Frequently Asked Questions Will this float switch fit my dishwasher?This part fits many Bosch and compatible dishwashers. Always verify your model number. What does a float switch do?It monitors water levels and prevents overfilling inside the dishwasher. What are signs of a bad float switch?Overfilling, leaking, or improper water level control. Is this OEM or aftermarket?This is a high-quality aftermarket replacement part. Shop With Confidence Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support. Fast Shipping Quality Tested Parts Compatibility Support  

Read more less

W10844024 Genuine OEM Whirlpool Dishwasher Water Inlet Valve The W10844024 is a genuine Whirlpool OEM water inlet valve for Whirlpool, Kenmore, KitchenAid, Estate, Roper, Inglis, Maytag, Crosley, Ikea, Magic Chef, Kirkland, and Amana dishwashers. This valve regulates the flow of water into the appliance during each fill stage of the wash cycle, opening and closing to admit the correct amount of water at the right times. Weighing approximately 0.2 lbs, common failure causes include mineral or sediment buildup inside the valve and general electrical wear in the solenoid. A failing valve produces a clear set of symptoms: the dishwasher not filling with water at all, or a valve that's unusually noisy — starting and stopping repeatedly — during heavy wash cycles as it struggles to regulate flow correctly. It directly replaces 3384890, 8283346, 9744468, W10219643, WP9744468, WPW10219643, 3378779, 3379356, 4383567, 8274221, 8283345, 9743175, 9743559, 9744029, 9744284, W10327248, W10844024VP, AP5989613, AWP42052, EAP11730996, PD00032565, PS11730996 Quick Answer The W10844024 Genuine OEM Whirlpool Dishwasher Water Inlet Valve fixes Whirlpool, Kenmore, KitchenAid, Estate, Roper, Inglis, Maytag, Crosley, Ikea, Magic Chef, Kirkland, and Amana dishwashers that aren't filling with water, or that are unusually noisy — starting and stopping — during heavy wash cycles. Replaces 3384890, 8283346, 9744468, W10219643, WP9744468, WPW10219643, 3378779, 3379356, 4383567, 8274221, 8283345, 9743175, 9743559, 9744029, 9744284, W10327248, W10844024VP, AP5989613, AWP42052, EAP11730996, PD00032565, PS11730996. Some households need a separate hose adapter for this valve if the existing water line connector has a smaller diameter than the new valve's fitting — check before you start, or be prepared for a quick hardware store trip. Common Problems This Part Fixes Dishwasher not filling with water at all Valve unusually noisy — starting and stopping repeatedly during heavy wash cycles Cycle stalling at the fill step and never advancing to wash Poor washing results due to insufficient water fill Leaking near the valve connections Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dishwasher water inlet valve directly replaces the following OEM and cross-reference part numbers: W10844024, 3384890, 8283346, 9744468, W10219643, WP9744468, WPW10219643, 3378779, 3379356, 4383567, 8274221, 8283345, 9743175, 9743559, 9744029, 9744284, W10327248, W10844024VP, AP5989613, AWP42052, EAP11730996, PD00032565, PS11730996 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This water inlet valve is compatible with select Whirlpool dishwashers, and also fits select Kenmore, KitchenAid, Estate, Roper, Inglis, Maytag, Crosley, Ikea, Magic Chef, Kirkland, and Amana dishwashers built on the Whirlpool platform, including model numbers such as KUDR25SHWH1, MDB4629AWB1, DU900PWKB0, DU900PWKQ0, and Kenmore 665.15522000, 66517662991, and 66516669991. Note: Always verify your full model number before ordering, since similar-looking dishwasher water valves can vary between models. Contact our support team with your model number if you're unsure. Key Features Genuine Whirlpool OEM part — factory-specified solenoid design and flow rate Regulates water flow into the dishwasher during each fill stage of the cycle Resolves "won't fill" and "noisy, starts and stops when filling" symptoms caused by valve failure Factory Certified Part built to Whirlpool's engineering specifications Direct drop-in replacement — matches the original mounting and hose connections Replaces 3384890, 8283346, 9744468, W10219643, WP9744468, WPW10219643, 3378779, 3379356, 4383567, 8274221, 8283345, 9743175, 9743559, 9744029, 9744284, W10327248, W10844024VP, AP5989613, AWP42052, EAP11730996, PD00032565, PS11730996 Compatible with Whirlpool, Kenmore, KitchenAid, Estate, Roper, Inglis, Maytag, Crosley, Ikea, Magic Chef, Kirkland, and Amana dishwashers Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number W10844024 Part Type Dishwasher Water Inlet Valve Condition Genuine OEM Brand Whirlpool Weight Approx. 0.2 lbs Function Regulates water flow into the dishwasher during fill Repair Difficulty Easy to Moderate Quantity 1 valve Compatible Brands Whirlpool, Kenmore, KitchenAid, Estate, Roper, Inglis, Maytag, Crosley, Ikea, Magic Chef, Kirkland, Amana Installation Notes ⚠️ Unplug Dishwasher And Shut Off Water Supply Before Starting — Check Your Hose Connector Size First Disconnect power at the outlet or shut off the circuit breaker, and disconnect the water lines connected to the old valve before beginning. Wear work gloves. Have a shop vacuum on hand — some customers have needed to remove standing water from the bottom of the dishwasher before starting this repair. Locate the old valve and use pliers to unscrew any screws or bolts connecting it to the appliance. Clean the area where the old valve was located, removing any debris before installing the new one. Check the diameter of your existing water line connector before starting — some households have a smaller-diameter connector than this new valve's fitting requires, in which case you'll need a separate hose adapter from a hardware store to complete the connection. Take the new W10844024 and place it in the same position as the old valve, making sure it's connected correctly, and secure any screws or bolts. Reattach the water lines to the new valve and reconnect power. Double-check all connections before restoring power, then run a test cycle to confirm the dishwasher fills correctly with no leaks. Tools needed: pliers, possibly a hose adapter, shop vacuum (if needed), work gloves. Frequently Asked Questions My dishwasher isn't filling with water at all. Is this the right part? Yes, this is the most direct symptom of a failed water inlet valve. Since this valve is what admits water from your household supply into the dishwasher, a solenoid failure or internal blockage can prevent any water from entering at all, stopping the wash cycle from proceeding. Will I need any extra parts for this installation? Possibly. A few customers have found their existing water line connector had a smaller diameter than this valve's fitting, requiring a separate hose adapter purchased locally from a hardware store to complete the connection. It's worth checking your connector size beforehand, or having a quick trip to the hardware store planned just in case. My dishwasher makes a noisy, start-and-stop sound when filling. Is that this valve? Yes, this is a documented symptom. One customer described their valve as "very noisy on heavy wash cycles, started and stopped when filling" before replacing it with this exact part, which resolved the issue. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original solenoid design, flow rate, and connection type of the water inlet valve originally installed in your dishwasher. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

MSWF Refrigerator Water Filter Description: This water filter is designed to remove impurities from the water and ice dispensed by your refrigerator, providing clean and fresh-tasting water. It effectively reduces contaminants such as chlorine, lead, mercury, and other particulates, ensuring safe drinking water for you and your family.  You should replace this water filter if it becomes clogged or reaches the end of its usable life, typically every six months. Causes of a bad water filter can include normal usage leading to clogging, the accumulation of sediments and impurities over time, or damage to the filter casing. Failing to replace the filter regularly can also compromise its effectiveness. Replaces Part Number: 1262070, AH1559689, EA1559689, MSWF3PK, WR02X12345, WR02X12801, WR02X13618, AP3997949, PS1559689.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WD12X24058 Dishwasher Genuine OEM Detergent Dispenser Detergent Dispenser  Fits select LG Dishwasher models. Replaces Part Numbers: AGM75469801, AP6234070, PS12078829. Description: This Detergent Module is a Genuine OEM part for select LG dishwasher models. It is designed to dispense the correct amount of detergent at the appropriate times during the wash cycle, ensuring that dishes are cleaned effectively. The module holds the detergent and releases it into the dishwasher when needed, contributing to the overall performance and efficiency of the appliance.

Read more less

8270020CM Dishwasher Door Spring Door balance spring - 7.75" overall length. Fits Whirlpool dishwashers. Replaces Part Numbers:WP8270020, 8270020, AP6012319, PS11745526.   This is an aftermarket part that can be used as a replacement for the OEM part.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less