XPARTCO W10909685 Dryer Thermal Fuse
Dryer thermal fuse located on the blower housing. If the dryer overheats, the thermal fuse blows cutting off power to the motor or the heating system. When the fuse is bad the dryer won't start or will run but not heat. The thermal fuse cannot be reset. Fuses often blow due to a clogged dryer vent.
Replaces part Numbers: W10909685, W10693363, G4AP0506, F 091C ACA2, PD00036363, EAP11766766, AP6034383, PS11766766.
This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
DE47-20034A Microwave Genuine High Limit Thermostat
Thermal cutout.
High limit thermostat. Open for continuity at room temperature, closes when it gets hot.
Fits Samsung over counter microwaves.
Replaces Part Numbers:DE47-20034A, AP4219754, PS4226431.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO S97018253 Range Vent Hood Light Fuse
The replacement S97018253 Range Vent Hood Light Fuse is designed for select Broan range hood models. This replacement fuse protects the range hood’s light circuit from power surges or faults. Ideal for restoring functionality to select Broan range hoods experiencing light-related issues, such as non-functioning lights or intermittent power.
Note: Disconnect power before installation. Handle glass fuse carefully.
Replaces part numbers: S97018253, 1930589, 97018253, AP5616207, PS10280886.
Compatibility (S97018253):
Compatible with select Broan range hood models, including but not limited to:
Broan: QP2, QP3, QP4 series (e.g., QP230BC, QP230BL, QP230SS, QP236BC, QP236BL, QP236SS, QP236WW, QP242BC, QP242BL, QP242SS, QP242WW, QP330BL, QP330SS, QP330WW, QP336BL, QP336SS, QP336WW, QP342BL, QP342SS, QP342WW, QP430SS, QP436SS, QP442SS)
Verify your model number or contact our support team for assistance.
Key Features (S97018253):
✅ Brand Compatibility: Fits select Broan range hood models.
🔥 Specifications: Replacement fuse, 8A, 120V, glass fuse (5x20mm), heat-resistant.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires basic tools (e.g., screwdriver, pliers); typically installed in 10–15 minutes.
🛡️ Reliable Fixes: Addresses range hood light issues like non-functioning lights or intermittent power.
Installation Notes (S97018253):
Safety First: Disconnect the appliance from the power source before installation.
Location: Typically found in the upper left corner of the range hood control board; remove filters and bottom pan to access.
Tools: Use a screwdriver to access the control board and pliers to remove and install the fuse.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Get your microwave or range hood running today!
Add to cart now for a budget-friendly fix!
XPARTCO S99527471 Hood Fuse – Compatible with Broan, Nutone, and Kenmore Range Hoods
Product Description
Protect your vent hood’s electrical system with the XPARTCO S99527471 Hood Fuse. This high-quality aftermarket replacement safeguards your range hood’s control board, fan motor, and lights from electrical surges and overheating. A blown fuse can cause the fan or light to stop working. Replacing it with this reliable XPARTCO fuse restores safe, efficient operation at a fraction of the OEM cost.
Replaces Part Numbers
S99527471, AP5611426, 1931293, PS10281737, 99527471.
Compatibility
This replacement hood line fuse fits select Broan, Nutone, and Kenmore range hoods.
Example compatible models include (but are not limited to): Broan QP230SS, Nutone RL6200 Series, and Kenmore 233.52343310.
Always verify your range hood’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to meet OEM safety and performance standards
⚡ Electrical Protection – Prevents power surges from damaging internal components
💰 Cost-Effective Solution – High-quality fuse at a lower price than OEM parts
🛠️ Quick Installation – Direct-fit design for easy DIY replacement
🛡️ Fixes Common Issues – Restores power to hood lights or fan after fuse failure
📐 Product Specification
Part Number: S99527471
Component Type: Range Hood Line Fuse
Material: Ceramic fuse with insulated metal terminals
Mounting: Inline wiring harness or fuse holder on control board
Operating Conditions: Rated for high-temperature kitchen environments
Compliance: Built to OEM-equivalent quality and safety standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, needle-nose pliers
⚠️ Safety First: Always unplug the range hood or turn off power at the circuit breaker before servicing to prevent electrical shock.
Steps:
Disconnect power and remove the control panel or cover.
Locate the fuse on the wiring harness or control board.
Gently remove the blown fuse using pliers.
Install the new XPARTCO S99527471 fuse securely in place.
Reassemble the cover, restore power, and test operation.
⏱️ Time Required: 10–15 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore your range hood’s safety and performance — Add to Cart Now for a reliable, affordable replacement!
XPARTCO 53-1096 Gas Dryer Thermostat - Compatible with Maytag, Amana, Magic Chef, Jenn-Air Dryers
Product Description
Keep your gas dryer safe and operational with the replacement 53-1096 Gas Dryer Thermostat. This high-limit thermostat is designed for select Maytag, Amana, Magic Chef, and Jenn-Air gas dryers, preventing overheating by shutting off the burner at 240°F and restarting at 200°F. It addresses issues like no heat, overheating, or premature shutoff, offering a cost-effective alternative to OEM parts.
Note: Includes one high-limit thermostat. Disconnect power and gas supply before installation. Often paired with thermal fuses (e.g., 53-1182, 53-0771) for comprehensive repairs.
Replaces part numbers: WP53-1096, 53-1096, PD00055179, AP6009640, PS11742808.
Compatibility:
Compatible with models including but not limited to:
Maytag: DG312, DG612, DG712, LDG7304AAL, LDG8604AAL, MDE3000AYW
Amana: NGD7200TW10, 4GNED4400YQ2
Magic Chef: CYG1005AXX, CYG2000AWW
Jenn-Air: JDE1000W, JDG1000W
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Maytag, Amana, Magic Chef, Jenn-Air, Norge, Admiral, and Crosley gas dryers.
🔥 Specifications: replacement high-limit thermostat, opens at 248°F, closes at 200°F, 25A at 240VAC.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, pliers, work gloves; typically installed in 15–20 minutes.
🛡️ Effective Fixes: Resolves no heat, overheating, or premature shutoff issues.
Product Specification
Part Number: 53-1096
Component Type: High-limit thermostat
Material: Metal and plastic
Mounting: Two 1/4" male spade terminals, includes mounting bracket
Operating Conditions: Suitable for high-temperature gas dryer environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source and gas supply before installation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running safely today!
Add to cart now for a budget-friendly fix!
DA47-00311A Refrigerator Genuine Defrost Heater
Replaces Part Numbers: DA47-00311A, AP5306643, PS4140651.
fits specific Samsung Refrigerator models
Description: This Refrigerator Defrost Heater Assembly is essential for maintaining your refrigerator's optimal performance. This Genuine OEM part ensures reliable defrost cycles, preventing ice buildup and enhancing cooling efficiency. Crafted with a durable heater sheath-metal, it withstands regular use and temperature fluctuations, providing long-lasting functionality. Installing the Refrigerator Defrost Heater Assembly helps restore your appliance defrost system, eliminating common issues like excessive frost and inconsistent temperatures. fits specific Samsung Refrigerator models
XPARTCO WR51X10055 Refrigerator Defrost Heater Assembly
The XPARTCO WR51X10055 is an aftermarket replacement refrigerator defrost heater and bracket assembly compatible with a wide range of GE, Hotpoint, Kenmore, Haier, Americana, Monogram, and Café refrigerators. The defrost heater is a glass quartz tube heater mounted on a bracket below the evaporator coils in the freezer compartment. During each automatic defrost cycle, the heater energizes and melts any frost that has accumulated on the evaporator coils — maintaining unobstructed airflow through the coils so the refrigerator can cool efficiently. When the heater fails, frost accumulates on the coils unchecked, blocking airflow and causing both the freezer and fresh food sections to gradually warm up.
Rated at 120V, 725W, this single quartz tube heater assembly measures 12-1/8" L x 3-3/8" W x 2-1/8" H and includes the heater element and mounting bracket. It directly replaces WR51X10030, AP3183311, 914088, AH303781, EA303781, PS303781, SH323, and EAP303781. Often replaced together with the defrost thermostat (WR50X10068) and temperature sensor (WR55X10025) for a complete defrost system repair. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The XPARTCO WR51X10055 Refrigerator Defrost Heater Assembly fixes GE and Hotpoint refrigerators where frost is building up on the evaporator coils, the freezer is too warm, the fresh food section is warming up, or the refrigerator is running continuously without cooling properly. Single quartz tube heater, 120V / 725W. Assembly measures 12-1/8" L x 3-3/8" W x 2-1/8" H. Includes heater and bracket. Replaces WR51X10030, AP3183311, 914088, SH323, and more. Compatible with GE, Hotpoint, Kenmore, Haier, Americana, Monogram, and Café.
Common Problems This Part Fixes
Frost or ice buildup covering the evaporator coils in the freezer compartment
Freezer section warming up or not maintaining set temperature
Fresh food section warming up even though the freezer is running
Refrigerator running continuously but not cooling properly
Visible frost accumulation on the freezer back wall behind the panel
Defrost heater element visibly burned out, broken, or dark/charred at the ends
Both compartments gradually warming up after working normally for years
Replaces Part Numbers
This defrost heater assembly directly replaces the following OEM and cross-reference part numbers:
WR51X10055, WR51X10030, 914088, AGE29323, AH303781, AP3183311, EA303781, EAP303781, PD00001004, PS303781.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This defrost heater is compatible with select refrigerators from the following brands:
GE refrigerators (side-by-side, French door, top-freezer, and bottom-freezer)
Hotpoint refrigerators
Kenmore / Sears refrigerators (select GE-built models)
Haier refrigerators (select GE-platform models)
Americana refrigerators
Monogram refrigerators
Café refrigerators
Tip: When replacing the defrost heater, it is highly recommended to also replace the defrost thermostat (WR50X10068) and temperature sensor (WR55X10025) at the same time. These three parts form the defrost system and are commonly replaced together — replacing all three prevents a second disassembly if another component fails soon after.
Key Features
Single quartz tube glass heater — melts frost from the evaporator coils during each automatic defrost cycle, maintaining airflow and cooling efficiency
Rated 120V / 725W — correct electrical specifications for compatible GE refrigerators
Assembly dimensions: 12-1/8" L x 3-3/8" W x 2-1/8" H — direct fit into the evaporator coil bracket
Includes heater element and mounting bracket — complete assembly ready to install
Replaces WR51X10030 and WR51X10055 — both older and current part numbers covered
Compatible with GE, Hotpoint, Kenmore, Haier, Americana, Monogram, and Café refrigerators
Often replaced together with WR50X10068 defrost thermostat and WR55X10025 temperature sensor
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
Part Number
WR51X10055
Also Replaces
WR51X10030
Part Type
Refrigerator Defrost Heater and Bracket Assembly
Condition
Aftermarket Replacement
Heater Type
Single quartz tube glass heater
Voltage
120V AC
Wattage
725W
Dimensions
12-1/8" L x 3-3/8" W x 2-1/8" H
Includes
Heater element and mounting bracket
Often Replaced With
WR50X10068 Defrost Thermostat, WR55X10025 Temperature Sensor
Compatible Brands
GE, Hotpoint, Kenmore, Haier, Americana, Monogram, Café
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Wear Work Gloves Unplug the refrigerator before beginning. Remove all food and shelving from the freezer compartment. Remove the freezer bottom drawer and the back panel screws (typically 2 hex-head screws). Slide out the back panel to expose the evaporator coils and defrost heater assembly. If the coils are covered in frost or ice, use a hair dryer to melt the ice before removing the heater — do not chip or force the heater free while iced over, as the glass element is fragile and will break. Disconnect the heater wires from the wiring harness — note the orientation before disconnecting. Remove the 2 Phillips screws securing the heater bracket and lift the heater assembly out. Install the new WR51X10055 heater assembly in the same position, reconnect the wires, and reinstall the bracket screws. Reinstall the back panel, shelving, and food. Restore power and verify the defrost cycle operates normally. Wear work gloves throughout — the evaporator area has sharp edges. Tools needed: Phillips screwdriver, 1/4" nut driver, hair dryer (if coils are iced over), work gloves.
Frequently Asked Questions
What does the refrigerator defrost heater do?
Modern refrigerators use an automatic defrost system that periodically runs a defrost cycle — typically once or twice a day — to melt frost that accumulates on the evaporator coils during normal operation. The defrost heater is a glass quartz heating element that energizes during this cycle and melts the frost off the coils. This keeps the coils clear so air can flow freely through them to cool the refrigerator. When the heater fails, frost builds up unchecked on the coils over days or weeks — eventually blocking airflow completely and causing both compartments to warm up, even though the compressor is still running.
How do I know if my defrost heater has failed?
Remove the freezer back panel to expose the evaporator coils. If the coils are heavily coated in frost or solid ice — especially if both the freezer and refrigerator sections have been warming up — a failed defrost heater is the most likely cause. You can confirm with a multimeter: disconnect the heater and probe both wire ends. A working heater shows continuity (resistance between approximately 10–200 ohms at room temperature depending on wattage). No continuity confirms the heater element has burned out. Also visually inspect the glass tube — a burned, blackened, or broken tube is a clear sign of failure.
Should I also replace the defrost thermostat and temperature sensor?
Yes — since the freezer must be fully emptied and the back panel removed to replace the heater, it is highly recommended to also replace the defrost thermostat (WR50X10068) and temperature sensor (WR55X10025) at the same time. All three components form the defrost system and wear at similar rates. A failed thermostat or sensor can cause the heater to run too long or not at all — replacing all three in a single repair eliminates that risk and saves you from another complete freezer teardown in the near future.
My freezer is warming up but the compressor is running — is it the defrost heater?
It often is — but not always. A compressor that is running but not cooling can be caused by a failed defrost heater (frost blocking airflow), a faulty evaporator fan motor (air not circulating), a defrost thermostat or timer failure, or a sealed system problem (refrigerant leak or compressor issue). The easiest way to distinguish a defrost system failure from other causes is to open the freezer and check whether frost has built up on the back panel or coils. If yes, the defrost heater is the most likely culprit. If the coils are clear and the compressor is running, look at the evaporator fan or sealed system next.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured as a single quartz tube glass heater rated at 120V/725W to match the dimensions and performance of the original WR51X10055 defrost heater assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 8557403 Dryer High-Limit Thermostat with Thermistor Replaces WP8557403
The XPARTCO 8557403 is an aftermarket replacement dryer high-limit thermostat and thermistor sensor assembly compatible with a wide range of Whirlpool, Maytag, Kenmore, Amana, KitchenAid, Jenn-Air, Roper, Admiral, Norge, and Magic Chef electric dryers — including the Whirlpool Duet and Maytag MED series. This single component combines two functions: the high-limit thermostat (rated L146-44C, opens at 295°F) acts as a resettable safety switch that cuts power to the heating element if the dryer air temperature exceeds safe limits, and the integrated 50-ohm thermistor continuously monitors air temperature and sends resistance-based readings to the control board to regulate the drying cycle.
When this part fails — whether the thermostat opens permanently or the thermistor provides incorrect temperature data — the dryer may produce no heat, run too hot, take too long to dry, overheat, or display temperature-related error codes. It measures 1-5/8"L x 1-5/8"W x 2"H with approximately 1-5/8" between mounting holes and is constructed from black/gray plastic and metal. It directly replaces WP8557403, 1180102, AP6013164, EAP11746386, PD00003588, and PS11746386. Note: the exhaust duct thermostat and thermal fuse are separate parts — if those have also failed, they must be ordered separately. Installs in 15–20 minutes with basic hand tools.
Quick Answer
The XPARTCO 8557403 Dryer High-Limit Thermostat with Thermistor fixes Whirlpool Duet, Maytag MED, and related dryers with no heat, overheating, or erratic temperature. Combined part: L146-44C high-limit thermostat (opens at 295°F, auto-resets) + 50-ohm NTC thermistor. 1-5/8"L x 1-5/8"W x 2"H, ~1-5/8" between mounting holes. Replaces WP8557403, 1180102, AP6013164, EAP11746386, PD00003588, PS11746386. For Whirlpool, Maytag, Kenmore, Amana, KitchenAid, Jenn-Air, Roper, and Admiral electric dryers.
Common Problems This Part Fixes
Dryer produces no heat — high-limit thermostat has failed open
Dryer overheating — thermostat not opening at the correct temperature
Dryer takes too long to dry — thermistor providing incorrect temperature readings to the control board
Dryer cycling on and off erratically — thermistor fault causing incorrect cycle control
Temperature-related error codes on models with digital displays
Multimeter test shows open circuit on the thermostat at room temperature
Multimeter test shows open or shorted thermistor (not ~50 ohms at room temperature)
Replaces Part Numbers
This thermostat/thermistor assembly directly replaces the following OEM and cross-reference part numbers:
WP8557403, 8557403, 1180102, AP6013164, AWP48681, EAP11746386, PD00003588, PS11746386.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This high-limit thermostat and thermistor is compatible with select electric dryers only from the following brands:
Whirlpool electric dryers — Duet, WED5000, WED5500, WED5600, WED5620, WED8000, WED8200, WED8500, WED9200, WED92HEF, WED7000 series and related models
Maytag electric dryers — MED3500, MED5630, MED6630, MED7230, MEDB835 series and related models
Kenmore / Sears electric dryers — 110-series (Whirlpool-built models)
Amana electric dryers (select models)
KitchenAid electric dryers (select models)
Jenn-Air electric dryers (select models)
Roper electric dryers
Admiral electric dryers
Norge electric dryers
Magic Chef electric dryers
Note: This part is for electric dryers only. The exhaust duct thermal fuse and cycling thermostat are separate parts — if those have also failed, they must be ordered separately. Always verify your model number before ordering.
Key Features
Combined high-limit thermostat and thermistor in a single assembly — replaces both functions in one part
High-limit thermostat rated L146-44C — opens at 295°F (146°C), resets automatically when cooled
Integrated 50-ohm NTC thermistor — continuously monitors dryer air temperature and sends readings to the control board for cycle regulation
Dimensions: 1-5/8"L x 1-5/8"W x 2"H; approx. 1-5/8" between mounting holes
Black/gray plastic and metal construction
Electric dryers only — not for gas dryer models
Replaces WP8557403, 1180102, AP6013164, EAP11746386, PD00003588, and PS11746386
Compatible with Whirlpool Duet, Maytag MED, Kenmore, Amana, KitchenAid, Jenn-Air, Roper, Admiral, Norge, and Magic Chef electric dryers
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–20 minutes with basic hand tools
Product Specifications
Part Number
8557403
OEM Part Number
WP8557403
Part Type
Dryer High-Limit Thermostat with Integrated Thermistor Sensor
Condition
Aftermarket Replacement
Application
Electric Dryers Only
Thermostat Rating
L146-44C — opens at 295°F (146°C), auto-resets
Thermistor
50-ohm NTC (at room temperature ~25°C)
Dimensions
1-5/8"L x 1-5/8"W x 2"H
Mounting Hole Spacing
Approx. 1-5/8" center to center
Color
Black / Gray
Material
Plastic / Metal
Compatible Brands
Whirlpool, Maytag, Kenmore, Amana, KitchenAid, Jenn-Air, Roper, Admiral, Norge, Magic Chef
Installation Notes
⚠️ Unplug Dryer Before Starting — Electric Dryers Only Disconnect power before beginning. The 8557403 thermostat/thermistor assembly is typically located on the heating element housing or duct inside the dryer — access it by removing the back panel. On Whirlpool Duet and Maytag front-load-style dryers, the component may be accessible by removing the lower front panel. Photograph all wire connections before disconnecting — the thermistor wires and thermostat wires must be reconnected to the correct terminals. Remove the two mounting screws and pull the old assembly off. Note the position and orientation before removing. Install the new 8557403 assembly in the same position and orientation, reconnect all wires, and reinstall the mounting screws and panel. Restore power and run a test heat cycle to confirm normal operation. Tools needed: Phillips screwdriver, 1/4" nut driver.
Frequently Asked Questions
What makes this part unusual — why does it combine a thermostat and a thermistor?
The WP8557403 is a combined assembly used on newer Whirlpool Duet and Maytag MED series dryers that use electronic temperature control rather than purely mechanical thermostats. The high-limit thermostat (L146-44C) provides the traditional safety function — it opens the circuit if dryer temperature exceeds 295°F. The integrated NTC thermistor continuously reports resistance-based temperature data to the electronic control board, which uses the data to regulate the heating element and control cycle timing. Both functions are built into a single compact housing, making this a unique part that replaces what older dryers used to handle with separate components.
How do I test the thermostat and thermistor?
Set your multimeter to continuity or resistance mode. For the thermostat portion: probe the thermostat terminals — at room temperature, a working thermostat shows closed continuity (near-zero resistance). An open circuit at room temperature confirms the thermostat has failed. For the thermistor portion: probe the thermistor terminals — at room temperature (approximately 25°C/77°F), a working 50-ohm NTC thermistor should read approximately 50 ohms. A reading of zero ohms (shorted) or open circuit (no continuity) confirms the thermistor has failed. Either failure mode warrants replacing the complete 8557403 assembly.
What is the difference between 8557403 and WP8557403?
These are the same part. WP8557403 is the updated Whirlpool OEM part number that superseded the original 8557403. The 1180102 is also a cross-reference for this same assembly. This aftermarket replacement is compatible with all of these numbers.
Do I also need to replace the thermal fuse or cycling thermostat?
The 8557403 replaces the high-limit thermostat and thermistor mounted on the heating element housing area. The exhaust duct thermal fuse (WP3392519 on most Whirlpool-family dryers) and cycling thermostat (WP3387134) are separate components located on the exhaust duct and are not included in or replaced by the 8557403. If your dryer has no heat, test all thermal components before ordering — check the 8557403 assembly, the thermal fuse, and the cycling thermostat, then order only what has failed. If an overheating event caused the high-limit to fail, the other thermal components may be stressed as well.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from plastic and metal with an L146-44C thermostat and 50-ohm NTC thermistor to match the specifications and performance of the original WP8557403 assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 3390719 Dryer Thermal Fuse – Replaces WP3390719 – Compatible with Whirlpool, Maytag & Kenmore Dryers
Product Description
Restore safe dryer operation and proper heating with the XPARTCO 3390719 Dryer Thermal Fuse. This dryer Thermal Fuse is a replacement part for specific Whirlpool, Kenmore dryer models. This disposable, one-time fuse ensures safe operation of your appliance by cutting off power if the temperature exceeds safe limits. A bad thermal fuse can cause your appliance to stop functioning or prevent it from turning on altogether. Symptoms of a bad thermal fuse include no heat or a dryer that won't start. It is located on the blower housing and cannot be reset.
XPARTCO is a trusted aftermarket brand offering appliance replacement parts built to OEM-equivalent specifications at a cost-effective price.
Replaces Part Numbers
WP3390719, 3390719, 15-198, 279650, 3389639, 3389640, 660877, 688841, 690198, 690798, 80004, ET402, G4AP0401, PD00002330, EAP11741444, AP6008309, PS11741444.
Compatibility
This replacement dryer thermal fuse fits select Whirlpool, Maytag, Kenmore, Amana, Estate, Roper, and Crosley dryers.
Commonly installed on the blower housing or exhaust duct, depending on model.
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM safety and temperature ratings
🛡️ Overheat Protection – Shuts off power if unsafe temperatures are detected
🔥 Fixes No-Heat or No-Run Issues – Common solution for blown fuse symptoms
🧩 Direct-Fit Design – Installs easily without modification
💰 Cost-Effective Repair – Reliable alternative to OEM thermal fuses
📐 Product Specification
Part Number: 3390719
Component Type: Dryer Thermal Fuse
Function: One-time over-temperature safety cutoff
Application: Blower housing or exhaust system
Mounting: Screw-mounted
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Unplug the dryer before servicing to avoid electrical shock.
Basic Steps:
Disconnect dryer power.
Remove the rear or front access panel (model dependent).
Locate the thermal fuse on the blower housing or exhaust duct.
Disconnect wires and remove the old fuse.
Install the new XPARTCO 3390719 thermal fuse.
Reconnect wiring, reassemble panels, and restore power.
Test dryer operation.
⏱️ Time Required: 15–20 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore dryer safety and reliable operation — Add to Cart Now for a dependable, budget-friendly repair!
XPARTCO DC47-00016A Dryer Thermal Fuse
The XPARTCO DC47-00016A is an aftermarket replacement thermal fuse for Samsung dryers. Mounted on the blower housing near the heat source, this fuse is a one-time safety device: as long as the dryer stays within its normal operating temperature, it does nothing at all, but the instant internal temperatures climb dangerously high — almost always from restricted airflow — the fuse permanently opens the circuit and cuts power to the dryer. That's why a blown thermal fuse produces such a specific symptom: the dryer won't start at all, with no lights, no tumble, and no response, even though the outlet has power.
This fuse terminates in 1/4" male spade connectors for a direct plug-in fit. Unlike a thermostat, a thermal fuse cannot be reset once it blows — it must be replaced. Critically, a blown thermal fuse is almost always a symptom rather than a random failure: restricted exhaust venting is the leading cause, since trapped heat is exactly what the fuse is designed to react to. A failing thermistor can also cause repeated fuse blows, since the two work together to regulate temperature. It directly replaces 2068545, AP4201894, AP4201899, PS4205213, EAP4205213, PS2038378, PS2038533, and 35001087.
Quick Answer
The XPARTCO DC47-00016A Dryer Thermal Fuse fixes Samsung dryers that won't start at all — no lights, no tumble, no response to any button — after overheating from restricted airflow. 1/4" male spade terminals. Replaces 2068545, AP4201894, AP4201899, PS4205213, EAP4205213, PS2038378, PS2038533, 35001087. Always inspect and clean the dryer venting when replacing this fuse — a blown fuse is a symptom of restricted airflow, and installing a new fuse without fixing the vent will likely blow it again.
Common Problems This Part Fixes
Dryer won't start at all — no lights, no tumble, no response to any button
Dryer that stopped working suddenly, especially after a load felt unusually hot
Dryer runs a short time then shuts off completely and won't restart
Repeated blown fuses on a dryer with a known venting or airflow restriction
Clothes coming out extremely hot right before the dryer stopped working
Dryer that recently smelled like burning or overheating before failing
Continuity test shows an open circuit across the old fuse
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer thermal fuse directly replaces the following OEM and cross-reference part numbers:
DC47-00016A, L0016A, AP4201894, PS4205213, AP6008681, EAP4205213, OEM12605691, EAP11741821, ASM868996, PD00005341, PD00003747, PS11741821, 35001087, WP35001087.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermal fuse is compatible with select Samsung dryers, and also fits select LG and Kenmore dryers built on a compatible platform, including model numbers such as:
DV209AEW/XAA, DV210AEW, DV210AEW/XAA
DV218AEB/XAA, DV218AEW/XAA, DV219AEW/XAA, DV220AEW, DV220AEW/XAA
DV330AEW, DV350AEW/XAA, DV419AEW/XAA
Note: This fuse is commonly paired with a matching thermistor (DC32-00007A) and thermostat (DC96-00887A / DC47-00018A), and manufacturer guidance recommends replacing the thermistor at the same time as the fuse, since the two work together and a failing thermistor is a common cause of repeated fuse blows. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement thermal fuse — one-time safety device that cuts power if the dryer overheats
Resolves "won't start at all," "stopped working suddenly," and "clothes came out extremely hot before it died" symptoms caused by a blown fuse
1/4" male spade terminal connectors for a direct plug-in electrical fit
Mounts to the blower housing near the heat source
Replaces 2068545, AP4201894, AP4201899, PS4205213, EAP4205213, PS2038378, PS2038533, and 35001087
Compatible with select Samsung, LG, and Kenmore dryers
Aftermarket replacement built to OEM-equivalent quality standards
Quick, simple repair — no special tools required beyond a basic screwdriver
Product Specifications
Part Number
DC47-00016A
OEM Part Number
DC47-00016A
Part Type
Dryer Thermal Fuse (Thermal Cut-Off)
Condition
Aftermarket Replacement
Location
Blower housing, near the heat source
Terminals
1/4" male spade connectors
Resettable
No — one-time use, must be replaced once blown
Companion Parts
Thermistor DC32-00007A, thermostat DC96-00887A / DC47-00018A
Quantity
1 thermal fuse
Compatible Brands
Samsung, LG, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — Inspect And Clean The Venting Before Reassembling Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel: remove the screws securing the panel to reach the blower housing where the fuse is mounted, usually alongside the thermistor. Photograph the wiring before disconnecting the spade terminals from the old fuse. Remove the mounting screw holding the fuse in place and pull it free, disconnecting both spade terminal wires. Before installing the new fuse, test it for continuity with a multimeter to confirm it's good out of the box, and test the old one to confirm it's actually blown (no continuity) rather than assuming. This is the most important step: fully inspect and clean the dryer's exhaust vent, from the lint trap housing all the way to the exterior vent hood, checking for lint buildup, crushed sections, or excessive length. A blown thermal fuse is a symptom of restricted airflow, and skipping this step means the new fuse is likely to blow again. Install the new DC47-00016A in the same mounting position, reconnect both spade terminals, and secure the mounting screw. Reinstall the rear panel, restore power, and run a test cycle to confirm normal heating and shutoff behavior. Tools needed: Phillips or nut driver (model-dependent), multimeter, vent brush or vacuum attachment for cleaning ductwork, work gloves.
Frequently Asked Questions
I replaced the fuse and it blew again. What's going on?
This is a strong sign that the underlying cause — almost always restricted airflow — was never addressed. Thermal fuses don't fail from age; they blow because the dryer overheated. If a new fuse keeps blowing, thoroughly inspect and clean the entire exhaust path from the lint trap housing to the outside vent hood, checking for lint buildup, crushed or kinked ductwork, or a vent run that's too long. If airflow checks out and the fuse still blows, have the thermistor and thermostat checked as well, since a failing thermistor can also trigger repeated fuse blows.
Can I just reset the thermal fuse instead of replacing it?
No. Unlike a thermostat, a thermal fuse is a one-time safety device — once it blows, its internal circuit is permanently broken and it cannot be reset or repaired. Replacement is the only option.
Should I replace the thermistor at the same time as the fuse?
It's worth strongly considering, and it's a common manufacturer recommendation. The thermistor and thermal fuse work together to manage temperature, and a failing thermistor can cause the dryer to run hotter than it should, leading directly to repeated fuse blows. Replacing both together, especially if your dryer has blown this fuse more than once, addresses the more likely root cause rather than just the symptom.
My clothes came out extremely hot right before the dryer died. Is that related?
Yes, this is a classic warning sign. Clothes coming out unusually hot indicates the dryer was already running hotter than normal, which is exactly the condition that leads to a blown thermal fuse. If you noticed this before the dryer stopped working, it strongly points to a ventilation or airflow problem that should be fully addressed before running the dryer again.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications, spade terminal connections, and mounting configuration of the original DC47-00016A thermal fuse used in compatible Samsung, LG, and Kenmore dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPMTC-120 Microwave Thermal Cut-Off Fuse 120℃ (248°F) – Normally Closed – Universal Microwave Safety Cutoff
Product Description
Protect your microwave from overheating with the XPMTC-120 Microwave Thermal Cut-Off Fuse 120℃ (248°F), Normally Closed. This high-quality aftermarket safety device remains closed (conductive) during normal operation and opens permanently when internal temperatures exceed 120℃, cutting power to prevent component damage or fire risk. A tripped thermal cut-off can cause the microwave to lose power or stop heating. Replacing it with the correctly rated NC fuse restores safe operation and proper protection.
Replaces Part Numbers
XPMTC-120, MTC-120, KSD-120LC, Microwave Thermal Fuse 120C NC, 248F Normally Closed Thermal Cutoff, WB27X1127, 254709, AH239811, EA239811, WB21X0535, WB21X535, PD00023089, EAP239811, AP2026352, PS239811, WB21X10162, 1556022, AH2370041, EA2370041, KSD 120LC, PD00037108, EAP2370041, AP4484224, PS2370041, 5304509474, 5304464093, 4583662, PD00042646, EAP12071309, AP6230621, PS12071309, WB27X11212, 3026293, SE-7350-006, WB24X28948, WB27X10854, PD00044723, EAP8754627, AP5791056, PS8754627, DE47-20059B, 2079767, DE47-20059A, PD00005107, EAP4226453, AP4580112, PS4226453, DE47-20060A, 2079768, PD00036362, EAP4226454, AP4220155, PS4226454, WB27X10567, 946799, AH239709, PD00050529, EA239709, AP3192016, PS239709.
Compatibility
This normally closed microwave thermal cut-off fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 120℃ (248°F) NC thermal cutoff.
Commonly used in countertop, over-the-range, and built-in microwave models.
Always verify temperature rating and contact type before ordering.Contact our support team if you’re unsure.
🔍 What’s the Difference Between NC and NO Thermal Cut-Offs?
Normally Closed (NC): Circuit is closed during normal operation and opens permanently when the rated temperature is reached.👉 Most microwave thermal cut-offs are NC.
Normally Open (NO): Circuit is open during normal operation and closes only when overheated (used in limited designs).
⚠️ Installing the wrong type (NC vs NO) may cause the microwave not to run or fail to protect against overheating.
✅ Key Features
🔄 Aftermarket Replacement – Built to OEM-equivalent safety specifications
🌡️ 120℃ (248°F) Rating – Trips at unsafe temperature levels
🔁 Normally Closed (NC) – Conducts power during normal operation
🛡️ Critical Safety Component – Helps prevent overheating and fire hazards
💰 Cost-Effective Repair – Affordable alternative to OEM thermal cut-offs
📐 Product Specification
Part Number: XPMTC-120
Component Type: Microwave Thermal Cut-Off Fuse
Temperature Rating: 120℃ (248°F)
Contact Type: Normally Closed (NC)
Function: One-time safety cutoff
Material: Heat-resistant metal body
Application: Magnetron or microwave cavity temperature protection
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, insulated pliers
⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow capacitors to discharge before handling internal parts.
Basic Steps:
Disconnect microwave power.
Remove the outer cabinet or access panel.
Locate the thermal cut-off near the magnetron or cavity.
Disconnect wiring and remove the failed fuse.
Install the new XPMTC-120 (NC) thermal cut-off in the same position.
Reassemble the microwave and restore power.
Test operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore microwave safety and dependable operation — Add to Cart Now for a reliable, budget-friendly repair!
WP74010750 Genuine OEM Whirlpool Oven Bake Element
The WP74010750 is a Genuine OEM Whirlpool replacement oven bake element compatible with select Whirlpool, Jenn-Air, Maytag, KitchenAid, Amana, Kenmore, Magic Chef, Admiral, Norge, and Roper electric ranges and ovens — particularly CE-series, JDS-series, and MES-series slide-in and freestanding ranges. The bake element is the lower heating element located at the bottom of the oven cavity. It provides the primary heat source for baking, roasting, and preheating. When the element coil burns through, the oven will not heat, will bake unevenly, or will trip the circuit breaker when the bake cycle is selected.
This Genuine OEM part is manufactured by Whirlpool to factory specifications and is rated at 2585W with push-on terminal ends (two 1/4" high-temp connectors). It measures approximately 23-5/8" wide x 15-3/8" long with 3-3/8" inserts. It directly replaces 74010750, 74003039, 7406P425-60, 1184162, WP74010750VP, ERB0750, AP6011209, PS11744404, and several additional cross-reference numbers. Installs in 15–20 minutes with basic hand tools.
Quick Answer
The WP74010750 Genuine OEM Whirlpool Oven Bake Element fixes electric ovens that won't heat, bake unevenly, or trip the circuit breaker during bake. 2585W, push-on terminal ends (two 1/4" high-temp connectors), 23-5/8"W x 15-3/8"L, 3-3/8" inserts. Genuine OEM. Compatible with Whirlpool CE, Jenn-Air JDS, Maytag MES series and related brands. Replaces 74010750, 74003039, 7406P425-60, 1184162, ERB0750, AP6011209, PS11744404.
Common Problems This Part Fixes
Oven produces no heat — bake element coil has burned through
Oven takes much longer than normal to preheat
Food baking unevenly — bottom of food undercooked while top is done
Bake element not glowing red during the bake cycle
Visible burn marks, blistering, holes, or breaks in the element coil
Oven trips the circuit breaker when the bake cycle is selected — shorted element
Burning smell during a bake cycle — arcing at a weak point in the element
Replaces Part Numbers
This bake element directly replaces the following OEM and cross-reference part numbers:
WP74010750, 74010750, 1184162, 74003039, 7406P425-60, AP6011209, AWP47950, EAP11744404, PD00002565, PS11744404, WP74010750VP.
Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This bake element is compatible with select electric ranges and ovens from the following brands and series:
Whirlpool electric ranges — CE35200, CE38800 and related CE-series models
Jenn-Air electric ranges — JDS8850, JDS9860 and related JDS-series slide-in models
Maytag electric ranges — MES5770 and related MES-series models
KitchenAid electric ranges (select models)
Amana electric ranges (select models)
Kenmore / Sears electric ranges (select Whirlpool-built models)
Magic Chef electric ranges (select models)
Admiral electric ranges
Norge electric ranges
Roper electric ranges
Note: Always verify your exact model number before ordering — bake elements are model-specific due to differences in dimensions and terminal configuration. The WP74010750 uses 1/4" push-on terminals and specific mounting dimensions that differ from other Whirlpool-family bake elements. If you are not sure this element is the right fit, contact our support team with your model number.
Key Features
Genuine OEM part manufactured by Whirlpool to factory specifications — guaranteed fit and performance
Primary heat source for baking, roasting, and preheating in compatible electric ovens
Rated 2585W — correct wattage for compatible CE, JDS, and MES series models
Push-on terminal ends — two 1/4" high-temperature connectors for direct wire attachment
Dimensions: approximately 23-5/8" wide x 15-3/8" long, with 3-3/8" inserts
Replaces 74010750, 74003039, 7406P425-60, 1184162, ERB0750, and AP6011209
Compatible with Whirlpool, Jenn-Air, Maytag, KitchenAid, Amana, Kenmore, Magic Chef, Admiral, Norge, and Roper electric ranges
DIY repair — installs in 15–20 minutes with basic hand tools
Product Specifications
Part Number
WP74010750
Part Type
Oven Bake Element (Lower Heating Element)
Condition
Genuine OEM
Application
Electric Ranges and Ovens
Wattage
2585W
Terminal Type
Push-on — two 1/4" high-temperature connectors
Width
Approximately 23-5/8 inches
Length
Approximately 15-3/8 inches
Inserts
3-3/8 inches
Compatible Brands
Whirlpool, Jenn-Air, Maytag, KitchenAid, Amana, Kenmore, Magic Chef, Admiral, Norge, Roper
Installation Notes
⚠️ Unplug Range or Turn Off Breaker Before Starting Disconnect power before beginning and allow the oven to cool completely. Open the oven door and remove all racks. The bake element is located at the bottom of the oven cavity. Remove the screws securing the element bracket to the rear oven wall — typically one or two Phillips screws at the back. Carefully pull the element forward toward the door to expose the two 1/4" push-on wire connectors behind the oven rear wall. Note the position of each wire before disconnecting — take a photo. Pull each wire connector off the element terminals by gripping the connector (not the wire) and pulling straight back. Connect the two wires to the new WP74010750 element's terminals, slide the element back into position, and secure the mounting screws. Restore power and run a bake cycle to confirm the element heats and glows red. Tools needed: Phillips screwdriver.
Frequently Asked Questions
How do I know if my bake element has failed?
The clearest sign is an oven that does not heat, takes much longer than usual to preheat, or bakes food unevenly with the bottom undercooked. When the bake element is working, it should glow bright red during a bake cycle. If it does not glow at all, the element has failed. You can also visually inspect the element for burn marks, blistering, cracks, or a visible break in the coil. A multimeter continuity test will confirm failure — a working element shows continuity (resistance of approximately 10–100 ohms), while a failed element reads open circuit. If the element trips the circuit breaker when selected, the element coil has shorted to the metal housing — replace it immediately.
What is the difference between WP74010750 and WP74003019?
Both are Genuine OEM Whirlpool oven bake elements but for different model families and with different wattage ratings. The WP74010750 is rated 2585W and is used on CE, JDS, and MES-series electric ranges. The WP74003019 is rated 2800W and is used on a different set of models. They are not interchangeable — always verify your model number to confirm which element is correct for your oven before ordering.
Is it normal for a bake element to arc or spark before it fully fails?
Yes — it is not unusual for a bake element to arc or spark at a weak spot before the coil fully burns through. If you see sparking, arcing, or a bright flash from the element area, immediately turn off the oven and disconnect power. Do not use the oven again until the element has been replaced. An arcing element can damage the oven liner and, in rare cases, pose a fire risk. The good news is that once you replace the WP74010750 element, the oven should perform normally again.
Are the wires interchangeable on the bake element terminals?
On most electric range bake elements — including the WP74010750 — the two terminal wires are interchangeable. The bake element is a resistance heater with no polarity, so either wire can connect to either terminal and the element will heat correctly. However, it is good practice to photograph the original connection before disconnecting to ensure you reconnect in the same configuration, particularly if one wire is color-coded differently from the other.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same bake element installed in compatible Whirlpool, Jenn-Air, Maytag, and related brand electric ranges from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
