XPARTCO WB02X35488 (2 Pack) Microwave Halogen Light Bulb
Product Overview
The XPARTCO WB02X35488 Microwave Halogen Light Bulb provides bright interior illumination for your microwave, allowing you to clearly monitor cooking progress. Brighten your microwave with the replacement WB02X35488 Microwave Halogen Light Bulb. This high-quality Light bulb, designed for GE, Hotpoint, and Kenmore/Sears microwaves, provides clear illumination for the interior or surface below, ensuring easy monitoring of your cooking. Featuring a G8 bi-pin base (120V, 50W, 3000K warm white), this durable halogen bulb offers reliable performance and easy installation.
Quick Answer
If your microwave light is dim, flickering, or not working, the WB02X35488 halogen bulb may be burned out. Replacing it restores clear visibility while cooking.
Replaces Part Numbers
Replaces OEM part number: WB02X35488, WB08X10057, WB08X10051, WB25X25393, WB36X10292, AGE368071, PD00070655, EAP6989401, AP6989401, PS16216934.
Compatibility
This microwave halogen light bulb is compatible with select GE, Hotpoint, and other GE-manufactured microwaves.
GE: CSA1201RSS01, CSA1201RSS02, CSA1201RSS03, CVM1790SS1SS, CVM1790SS2SS, JVM1790BK01, JVM1790CK01, JVM1790SK01, JVM1790WK01, JNM3163RJ1SS, JNM3163RJ2SS, JNM3163RJ3SS
Hotpoint: Select models requiring WB08X10057 or compatible halogen bulbs
Kenmore/Sears: Select models requiring WB08X10057 or compatible halogen bulbs
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Microwave interior light not working
Dim or flickering light
Reduced visibility while cooking
Key Features
Bright halogen illumination
Restores clear interior visibility
High-quality aftermarket replacement
Easy bulb replacement design
Product Specifications
Part Number: WB02X35488
Part Type: Microwave Halogen Light Bulb, 120V, 50W, G8 bi-pin base, 1.69" x 0.5", 3000K warm white, 2400 lumens, dimmable, 2000-hour average life, copper contacts.
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Microwave Interior Lighting
Troubleshooting Guide
No interior light → Burned out bulb
Flickering light → Failing bulb
Dim light → Aging or damaged bulb
When Should You Replace This Bulb?
Replace this bulb if your microwave interior light is not functioning properly or has become dim or inconsistent.
Installation Notes
⚠️ Disconnect power before installation. Allow the bulb to cool before handling and replace carefully according to your microwave model.
Related Parts
Microwave Door Switch
Control Panel
Turntable Motor
Frequently Asked Questions
Will this bulb fit my microwave?This bulb fits many GE and compatible models. Always verify your model number.
Is this a halogen bulb?Yes, this is a halogen light bulb designed for microwave use.
What are signs of a bad bulb?No light, dim light, or flickering indicates replacement is needed.
Is installation difficult?Most bulbs are easy to replace, but always follow your appliance manual.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
XPARTCO 00631633 Range Surface Burner Igniter Electrode
The XPARTCO 00631633 is an aftermarket replacement gas range surface burner igniter electrode (also called a spark electrode) compatible with select Bosch, Thermador, and Gaggenau gas ranges and cooktops in the HDI, HGI, NGM, NGMP, HDIP, and HGIP series. The surface burner igniter electrode is the ceramic-tipped spark generator located at each gas burner position on the cooktop. When the burner is turned on, the ignition system sends a high-voltage pulse to the electrode, which generates a spark across the ceramic tip to ignite the gas flowing from the burner. When the electrode cracks, chips, or becomes contaminated with grease or food residue, the burner may fail to light, click continuously without igniting, or spark intermittently.
This replacement electrode is constructed from high-quality ceramic and metal — the ceramic insulator body withstands the thermal cycling of repeated ignition, while the metal spark tip maintains reliable spark gap geometry over time. Sold individually — one electrode per order. It directly replaces AP5950372, 4162041, and PS10057850. Because a gas range typically has four or more burners with individual electrodes, compare your existing electrode's dimensions and mounting configuration before ordering to ensure a correct fit. Installs in minutes — no tools required in most cases.
Quick Answer
The XPARTCO 00631633 Range Surface Burner Igniter Electrode fixes Bosch, Thermador, and Gaggenau gas ranges where a surface burner won't light, clicks repeatedly without igniting, or sparks intermittently. Ceramic and metal construction. Sold individually — one electrode per order. Compatible with Bosch HDI, HGI, NGM, NGMP, HDIP, HGIP series. Replaces AP5950372, 4162041, PS10057850. Compare dimensions to your original before ordering — each burner position uses the same electrode style on compatible models.
Common Problems This Part Fixes
Gas burner will not light when the knob is turned
Burner clicks repeatedly without igniting the gas
Burner sparks intermittently — fires once or twice but does not sustain ignition
Igniter clicks continuously even when the burner knob is in the off position
One burner not lighting while other burners on the same range work normally
Electrode tip visibly cracked, chipped, or heavily contaminated with baked-on grease
Weak or inconsistent spark — arc not reaching the burner port reliably
Replaces Part Numbers
This igniter electrode directly replaces the following OEM and cross-reference part numbers:
00631633, 631633, ABS11789, AP5950372, EAP10057850, PD00044775, PS10057850
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This igniter electrode is compatible with select gas ranges and cooktops from the following brands and series:
Bosch gas ranges — HDI8054U, HDI8056U, HGI8046UC, HGI8054UC, HGI8056UC series
Bosch gas ranges — HDIP054U, HDIP056U, HGIP054UC, HGIP056UC series
Bosch gas cooktops — NGM5055UC, NGM5455UC, NGM5655UC, NGM8055UC, NGM8065UC, NGM8655UC, NGM8665UC, NGMP055UC, NGMP655UC series
Thermador gas ranges and cooktops (select models using the same electrode style)
Gaggenau gas ranges and cooktops (select models using the same electrode style)
Note: Before ordering, compare your existing igniter electrode's physical dimensions and mounting configuration to confirm this electrode is the correct fit for your burner position. Always verify your exact model number. If you are unsure, contact our support team with your model number for confirmation.
Key Features
Ceramic and metal spark electrode — generates the high-voltage spark that ignites the gas burner when the knob is turned
High-quality ceramic insulator body — withstands repeated thermal cycling without cracking under normal use
Durable metal spark tip — maintains reliable spark gap geometry for consistent ignition
Replaces AP5950372, 4162041, and PS10057850
Compatible with Bosch HDI, HGI, NGM, NGMP, HDIP, and HGIP series gas ranges and cooktops
Also compatible with select Thermador and Gaggenau gas ranges and cooktops
Sold individually — one electrode per order; order as many as needed for your burner positions
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in minutes, no special tools required in most cases
Product Specifications
Part Number
00631633
Also Known As
631633
Part Type
Gas Range Surface Burner Igniter Electrode (Spark Electrode)
Condition
Aftermarket Replacement
Application
Gas Ranges and Cooktops
Material
Ceramic / Metal
Color
White
Sold As
Single electrode — order quantity as needed
Compatible Brands
Bosch, Thermador, Gaggenau
Installation Notes
⚠️ Gas Appliance Safety Warning This part is used in gas ranges. Always turn off the gas supply at the shutoff valve and unplug the range from the electrical outlet before beginning any repair. If you smell gas at any point during or after installation, leave the area immediately and contact your gas utility provider. If you are not confident working on gas appliances, have this part installed by a qualified appliance technician.
⚠️ Unplug Range and Turn Off Gas Before Starting With the range unplugged and gas supply off, remove the cooktop grates and burner caps to access the burner heads. The igniter electrode is the small ceramic component positioned beside each burner head, held in place by a mounting bracket and screw or a snap-in clip depending on the model. Disconnect the single wire connector from the old electrode. Remove the mounting screw and lift the old electrode out. Install the new 00631633 electrode in the same position, secure the mounting screw, and reconnect the wire connector. Replace the burner caps and grates. Restore power and gas supply, then test each burner for reliable ignition. If the burner still does not light after replacing the electrode, inspect the igniter wire and the electronic ignition module. Tools needed: Phillips or Torx screwdriver (for mounting bracket on some models); no tools needed on models with snap-in electrodes.
Frequently Asked Questions
What does the surface burner igniter electrode do?
The igniter electrode is the component that creates the spark to light each gas burner. When you turn a burner knob past the "lite" position, the range's electronic ignition module sends a series of high-voltage pulses through the igniter wiring to the electrode at that burner. The electrode generates a visible spark across its ceramic tip to the grounded burner cap or burner head, and that spark ignites the gas flowing from the burner ports. Each burner position has its own dedicated electrode — failure of one electrode affects only that burner, while other burners on the same range continue to work normally.
My burner clicks constantly even when turned off — is it the electrode?
Constant clicking when a burner is in the off position is almost always caused by moisture or food residue in the igniter system rather than a failed electrode. When liquid boilover or steam gets into the burner cap area or electrode housing, it can cause the ignition module to fire continuously. Remove the burner cap and grate from the affected burner and allow everything to dry thoroughly — an hour in a warm oven (electric only, turned off) can help. Wipe the electrode tip clean with a dry cloth. If clicking persists after the components are completely dry and clean, the electrode or the ignition module may have been damaged by the moisture and needs replacement.
How many electrodes do I need for my Bosch range?
Most Bosch gas ranges have four surface burners, each with its own dedicated igniter electrode — so a full cooktop replacement typically requires four electrodes. This listing is for one electrode. If only one burner is not lighting, you likely only need one replacement. If multiple burners are failing, order one electrode for each affected burner. Because the electrodes on compatible Bosch models use the same part number across all burner positions, one order of multiple quantities covers all positions.
Can I clean the electrode instead of replacing it?
Yes — a contaminated or greasy electrode can often be cleaned successfully rather than replaced. Remove the electrode from the burner area and gently clean the ceramic tip and metal contact with a dry cloth or a soft toothbrush. Do not use water or liquid cleaners directly on the electrode — moisture in the ceramic can cause persistent clicking. If the ceramic body is cracked or the metal tip is corroded or missing, replacement is required. If the ceramic is intact and clean but the spark is still weak or absent, the electrode's spark gap geometry may have changed from thermal expansion and a replacement is the better fix.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Bosch OEM part, but is manufactured from high-quality ceramic and metal to match the dimensions and spark performance of the original 00631633 igniter electrode.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WG446 Microwave Universal Mica Sheet, Waveguide Cover (Pack of 2) – Compatible with Most Microwave Brands
Product Description
Protect your microwave from sparking, arcing, and grease buildup with the WG446 Microwave Universal Mica Sheet / Waveguide Cover (Pack of 2). These high-quality aftermarket mica sheets shield the waveguide opening from moisture, steam, and food splatter, helping maintain efficient and safe microwave operation. Ideal for replacing damaged, burnt, or contaminated covers, this 2-pack offers excellent value and universal fit.
Replaces Part Numbers
WG446, Universal Mica Waveguide Cover and equivalent microwave mica sheet replacements
Compatibility
This universal waveguide cover 2-pack fits a wide range of Samsung, Whirlpool, GE, LG, Panasonic, Sharp, Kenmore, Emerson, and many other microwaves that use cut-to-fit mica sheets.
Suitable for models such as (but not limited to):LG LMV1762ST, Samsung ME16H702SES, Whirlpool WMH31017HZ, GE JVM3160RFSS, Panasonic NN-SN686S.
Always match the original cover’s dimensions before installation. Contact our support team if you’re unsure.
✅ Key Features
🔄 Universal Aftermarket Replacement – Cut-to-fit design works with most microwave brands
🧱 High-Heat Protection – Prevents debris from entering the waveguide and causing sparks
✂️ Trim-to-Size Sheets – Easy to cut using scissors or a utility knife
💰 2-Pack Value – Keep an extra sheet available for future replacements
🛡️ Fixes Common Issues – Eliminates sparking, burning smell, poor heating, or arcing caused by damaged covers
📐 Product Specification
Part Number: WG446
Component Type: Microwave Mica Sheet / Waveguide Cover
Material: Heat-resistant mica composite
Dimensions: Approx. 5.9"L x 4.7"W (15 cm x 12 cm) (can be trimmed to size)
Thickness: standard mica insulation
Mounting: Clips or screws depending on microwave model
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Scissors or utility knife, screwdriver (if screws are used)
⚠️ Safety First: Unplug the microwave before installation. Never operate without a waveguide cover.
Steps:
Disconnect power and remove the old waveguide cover.
Use the original cover as a template to trace and cut the new WG446 sheet.
Insert the new cover into the mounting clips or secure with screws.
Repeat with the second sheet if needed.
Restore power and test heating.
⏱️ Time Required: 5–10 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Prevent microwave sparking and prolong appliance life — Add to Cart Now for a cost-effective, universal repair solution!
(2 Pack) WB31M20CM Porcelain 6" Drip Pan
Porcelain drip bowl (also called a drip pan) for 6 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner.
6" Porcelain pan.
Fits GE, Hotpoint range.
Replaces Part Numbers: WB31M20, WB32X5070, WB31M0020, AH244375, EA244375, AP2028044, PS244375.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WB31M20CM Porcelain 6" Drip Pan
Porcelain drip bowl (also called a drip pan) for 6 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner.
6" Porcelain pan.
Fits GE, Hotpoint range.
Replaces Part Numbers: WB31M20, WB32X5070, WB31M0020, AH244375, EA244375, AP2028044, PS244375.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO DE60-20066A Microwave Mounting Flat Bolt
The XPARTCO DE60-20066A is an aftermarket replacement mounting flat bolt for over-the-range microwaves, including Samsung and Maytag microwave and hood combinations. The flat bolt is the long mounting bolt that holds the microwave in place. If the original is stripped, damaged, or missing, the microwave may no longer stay securely mounted.
This bolt also replaces the GE WB01X10180 flat cab mounting bolt. Because it holds a heavy appliance in place, match it to the bolt you are replacing and make sure the microwave is properly supported while you work.
Quick Answer
The XPARTCO DE60-20066A Mounting Flat Bolt replaces a stripped, damaged, or missing mounting bolt on an over-the-range microwave. Replaces Samsung DE60-20066A and GE WB01X10180. Classic symptom: the microwave is loose on its mounting bracket, or one of the mounting bolts is stripped or missing.
Common Problems This Part Fixes
Stripped mounting bolt
Missing mounting bolt after the microwave was removed or moved
Microwave loose or not held securely against its mounting bracket
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This mounting flat bolt directly replaces the following part numbers:
DE60-20066A, ASM36399, AP4219712, OEM12659145, EAP4226718, PD00024313, PS4226718, WB01X10180, WB1X10180, AP3205964, AGE20652, AH651196, EA651196, OEM9617901, 942461, PD00035893, PS651196
DE60-20066A is the Samsung number and WB01X10180 is the GE number. Confirm against your microwave's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This bolt is listed for Samsung and Maytag over-the-range microwaves under DE60-20066A, and for GE, Hotpoint, and Kenmore microwaves under WB01X10180, including these examples:
Samsung ME18H704SFS/AA-00, ME17R7021ES/AA-00, SMH1816S/XAA-00, SMH9151ST/XAA-00
Maytag MMV1153BAS, MMV5165BAS, UMV1152CAS
GE CVM2072SM1SS, DVM1850DM2WW, DVM1850DM4BB
Kenmore 36362702200, 36362709200
Note: The models above are a small sample of longer lists, not full lists. Compare your old bolt's length and head style to this bolt, and contact our support team with your model number to verify fit before ordering.
Key Features
Aftermarket replacement mounting flat bolt for over-the-range microwaves
Replaces Samsung DE60-20066A and GE WB01X10180
Approximately 4 inches long
Restores a secure mount when the original bolt is stripped or missing
Product Specifications
Part Number
XPDE60-20066A
OEM Part Number
DE60-20066A, WB01X10180
Part Type
Microwave Mounting Flat Bolt
Condition
Aftermarket Replacement
Length
Approx. 4 Inches
Application
Over-the-Range Microwaves (Samsung, Maytag, GE, Hotpoint, Kenmore)
Installation Notes
⚠️ Unplug Power And Support The Microwave Unplug the microwave before beginning, and wear work gloves. An over-the-range microwave is heavy, so have a helper support it, or support it from below, while you remove or loosen any fasteners. Follow your model's installation guide. In general, you remove the screws covering the mounting bolts, loosen the mounting bracket screws, replace the old bolt with the new one, then reattach the bracket and cover screws. Return the microwave to position, make sure it is firmly seated and secure, and reconnect power.
Frequently Asked Questions
My microwave is loose on its mount. Is this the part I need?
If a mounting bolt is stripped, damaged, or missing, replacing it is the usual fix. Check the bracket and the other fasteners too, and do not rely on a microwave that is not securely mounted.
Is DE60-20066A the same as WB01X10180?
DE60-20066A is the Samsung number and WB01X10180 is the GE number. This bolt is listed as a replacement for both. Compare it to your old bolt, or contact our support team with your model number, before ordering.
How many bolts come in this order?
Retailers list the equivalent GE bolt as sold individually, but do not state a pack count for every listing. Contact our support team if you need to confirm the quantity.
Will this fit my microwave?
It is listed for many over-the-range microwaves, but the model lists above are only samples. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WB02X10646 Hood Line Fuse
The replacement WB02X10646 Hood Line Fuse is designed for select GE range hood models. This fuse protects the hood’s electrical system (e.g., fan or light circuits) from power surges or faults. Ideal for restoring functionality to GE appliances experiencing hood-related power issues, such as fan or light failures.
Note: Disconnect power before installation. Verify voltage and amperage compatibility with your appliance model.
Replaces part numbers: WB02X10646, 873971, AH223926, EA223926, WB02X10584, WB2X10584, WB2X10646, AP3423517, PS223926.
Compatibility (WB02X10646):
Compatible with select GE microwave and range hood models, including but not limited to:
GE: JVM series, Profile, Cafe, Monogram (specific models pending verification)
Verify your model number or contact our support team for assistance.
Key Features (WB02X10646):
✅ Brand Compatibility: Fits select GE microwave and range hood models.
🔥 Specifications: Replacement hood line fuse, specifications vary by model (typically 125V–250V, verify amperage), heat-resistant.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires basic tools (e.g., screwdriver, pliers); typically installed in 10–15 minutes.
🛡️ Reliable Fixes: Addresses hood-related issues like fan or light not working.
Installation Notes (WB02X10646):
Safety First: Disconnect the appliance from the power source before installation.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Get your microwave or hood running today!
Add to cart now for a budget-friendly fix!
XPARTCO 17438200000160 Gas Dryer Flame Switch
The XPARTCO 17438200000160 is an aftermarket replacement gas dryer flame switch compatible with select Midea, Insignia gas dryers, including the MLG45N1BWW, MLG45N3BMG, MLG45N3BWW, MLG52S7AWW, CDG41N1AW/CDG45N1AW series, NSDRE67WH8A, NSFDRG67WH8A, NSDRE67WH8AC, NSTDRG75W1. The flame switch is a safety component mounted on the burner assembly that confirms a flame is actually present after the gas valve opens and the igniter lights the burner. If the switch does not detect a flame within the expected window, it signals the control board to shut off the gas valve, preventing unburned gas from continuing to flow into the dryer cabinet.
When the flame switch fails, the dryer may not heat at all, may shut off the burner shortly after ignition (short-cycling the flame), may trip a no-heat fault code on models with digital displays, or — in rarer failure modes — may fail to shut off gas flow appropriately, which is a safety-relevant failure. It directly replaces 17438200000160 (Midea OEM). Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO 17438200000160 Gas Dryer Flame Switch fixes Midea gas dryers that won't heat, where the burner lights and then shuts off shortly after ignition, or where a no-heat fault is displayed. Mounted on the burner assembly — confirms flame presence after ignition and signals the control board to keep the gas valve open. Genuine Midea OEM part number. Compatible with Midea MLG45N1BWW, MLG45N3BMG, MLG45N3BWW, MLG52S7AWW, CDG41N1AW, and CDG45N1AW gas dryers.
Common Problems This Part Fixes
Gas dryer not heating — flame switch not confirming flame presence to the control board
Burner lights briefly and then shuts off — flame switch failing to maintain the "flame confirmed" signal
No-heat fault code displayed on models with digital control panels
Dryer runs and tumbles normally but produces no heat
Burner repeatedly cycling on and off rapidly during a heat cycle
Visible damage, corrosion, or carbon buildup on the flame switch near the burner
Replaces Part Numbers
This flame switch directly replaces the following part number:
17438200000160, AP7153000, PS18188577.
This is the Midea, Insignia manufacturer part number used across multiple Midea gas dryer models. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This flame switch is compatible with select Midea, Insignia gas dryers, including:
Midea MLG45N1BWW gas dryer
Midea MLG45N3BMG gas dryer
Midea MLG45N3BWW gas dryer
Midea MLG52S7AWW gas dryer (8.0 cu. ft. front load)
Midea CDG41N1AW gas dryer (Criterion, air vent)
Midea CDG45N1AW gas dryer (Criterion, air vent)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Confirms flame presence at the burner after ignition and signals the control board accordingly
Safety component — helps ensure the gas valve closes promptly if a flame is not detected
Mounts directly to the burner assembly in the same position as the original switch
Genuine Midea manufacturer part number — designed as a direct fit for compatible models
Compatible with Midea MLG45N1BWW, MLG45N3BMG, MLG45N3BWW, MLG52S7AWW, CDG41N1AW, and CDG45N1AW gas dryers
Installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
XP17438200000160
Part Type
Gas Dryer Flame Switch
Condition
Aftermarket Replacement
Application
Gas Dryers (Midea platform)
Location
Mounted on the burner assembly
Compatible Brands
Midea
Installation Notes
⚠️ Gas Appliance Safety Warning This part is installed in a gas dryer. Always unplug the dryer and shut off the gas supply at the shutoff valve before beginning any repair. If you smell gas at any point during or after installation, leave the area immediately and contact your gas utility provider. Do not restore power or gas until the repair is fully complete and all connections are confirmed secure. If you are not comfortable working on gas appliances or safety-relevant flame-detection components, have this part installed by a qualified technician.
⚠️ Wear Work Gloves — Access Requires Cabinet Disassembly Disconnect power and shut off gas before beginning. Wear work gloves throughout — there are sharp metal edges inside the dryer cabinet. Remove the lint filter and the screws securing the lint filter housing. Release the top panel locking clips with a putty knife and lift the top panel. Disconnect the door switch harness and remove the front panel to access the drum and burner assembly. Locate the flame switch mounted on the burner assembly — it is positioned to detect the flame produced once the igniter lights the gas. Photograph the wire connections before disconnecting. Disconnect the wires from the old flame switch, remove the mounting screw, and pull the switch free. Install the new 17438200000160 flame switch in the same position, secure the mounting screw, and reconnect the wires. Reassemble the front panel, drum, and top panel in reverse order. Restore gas and power, and run a test heat cycle to confirm the burner ignites and stays lit normally. Tools needed: Phillips screwdriver, putty knife, work gloves.
Frequently Asked Questions
What does the flame switch do, and how is it different from an igniter?
The igniter is the component that heats up and ignites the gas at the burner. The flame switch is a separate safety component that confirms a flame is actually present after the igniter has done its job and the gas valve has opened. If the flame switch does not detect the expected flame condition, it signals the control system to close the gas valve, stopping gas flow. This two-part system — ignition plus flame confirmation — is a standard safety design in gas dryers and gas appliances generally, ensuring gas does not continue flowing if combustion isn't actually occurring.
My burner lights and then shuts off after a few seconds — is this the flame switch?
Yes, this is a common symptom of a failing flame switch. If the switch is not reliably maintaining its "flame detected" signal to the control board even though the burner is genuinely lit, the system may interpret this as a flame failure and shut the gas valve as a safety precaution — causing the burner to repeatedly light and then extinguish. This short-cycling pattern during what should be a continuous heat cycle is a strong indicator that the flame switch needs replacement.
Why is this called a "flame switch" rather than a "flame sensor"?
Different manufacturers use different terminology for similar flame-detection safety components. On Whirlpool-family gas dryers, this type of part is typically called a "flame sensor" — a bimetal-style sensor near the igniter that closes a circuit when it senses sufficient heat. Midea's parts catalog labels this specific component the "flame switch," and it serves an analogous safety role within the Midea gas burner system: confirming the presence of a flame after ignition. The terminology differs by manufacturer, but the safety function is similar in concept.
Why does this repair require opening the whole dryer cabinet?
On Midea gas dryers, the flame switch is mounted directly on the burner assembly inside the dryer cabinet, which is only accessible after removing the lint filter housing, releasing the top panel, and removing the front panel. This is a more involved repair than swapping an externally accessible part, but it follows the same general gas dryer disassembly procedure used for replacing igniters, thermal fuses, and other burner-area components. Since the cabinet must be opened, it can be a good opportunity to inspect other burner components (igniter, gas valve coils) for wear at the same time.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is manufactured to match the dimensions, mounting configuration, and function of the original 17438200000160 Midea flame switch.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10209656 Range Surface Igniter – Compatible with Whirlpool, Maytag, KitchenAid, and Kenmore Gas Ranges
Product Description
Restore reliable burner ignition with the XPARTCO W10209656 Range Surface Igniter. This high-quality aftermarket replacement provides the heat needed to ignite gas burners on your cooktop. A weak or failed igniter can cause burners not to light or take too long to ignite. Replacing it with this durable XPARTCO igniter restores instant ignition and safe cooking performance.
Replaces Part Numbers
WPW10209656, W10209656, 1468965, 98008959, 98012193, 98014514, 98014515, 98017561, 98017562, 98017917, W10112313, W10127479, AP6017135, PS11750430.
Compatibility
This replacement surface igniter is compatible with select Whirlpool, Maytag, KitchenAid, and Kenmore gas ranges.
Example compatible models include (but are not limited to): Whirlpool WFG320M0BS3, Maytag MGR6600FZ0, and Kenmore 665.75002100.
Always verify your range’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Compatible with Whirlpool-brand gas ranges
🔥 Reliable Ignition – Provides consistent spark for fast burner lighting
💰 Affordable Solution – Quality alternative to OEM parts at lower cost
🛠️ DIY Friendly – Installs easily with basic hand tools
🛡️ Fixes Common Issues – Solves burners not igniting or clicking without flame
📐 Product Specification
Part Number: W10209656
Component Type: Gas Range Surface Igniter
Material: High-temperature ceramic base and metal electrode
Mounting: Direct-fit replacement for surface burner assembly
Operating Conditions: Designed for standard household gas ranges
Compliance: Built to OEM-equivalent standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the range and shut off the gas supply before starting repairs.
Steps:
Disconnect power and shut off gas supply.
Remove burner grates and top panel to access the igniter.
Detach the wire connector and mounting screw from the old igniter.
Install the new XPARTCO W10209656 igniter and reconnect wires.
Reassemble burner components, restore power and gas, and test ignition.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Enjoy quick, reliable ignition every time — Add to Cart Now for a dependable, budget-friendly repair!
EXP15A Ceramic Microwave Fuse
Fast Blow 15A, 250V
Replaces Part Numbers:
WB27X7, 14QBP15CFB, AP2626454, PS240270, M0805102, AP6014670, WPM0805102, 3601-001197, PS4131368, AP4046099, PS239596, AP3189379, WB08T10027, WB2X8151, WB27X10454.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO W10316760 Refrigerator Thermistor Sensor
The XPARTCO W10316760 is an aftermarket replacement temperature thermistor compatible with a wide range of Whirlpool-built refrigerators sold under the Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef brands. The thermistor sits inside the fresh food or freezer compartment and continuously reports internal temperature back to the electronic control board, which uses that reading to cycle the compressor, evaporator fan, and damper to keep the compartment in range. When the thermistor drifts out of calibration or fails outright, the control board loses an accurate temperature signal and the refrigerator commonly responds with erratic cooling, a warmer-than-normal compartment, food freezing when it shouldn't, or a flashing/blank temperature display.
This XPARTCO version is built with a quick-connect mounting clip, so it plugs in without cutting or splicing wires — unlike the genuine Whirlpool OEM part, which ships as a splice-in kit requiring you to cut the old thermistor's leads and join the new ones with included wire connectors. It directly replaces W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944, and additional cross-reference numbers listed below. Installs in 15–30 minutes with basic hand tools.
Quick Answer
The XPARTCO W10316760 Refrigerator Thermistor Sensor fixes Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef refrigerators that are running warm, running constantly, freezing food unexpectedly, or showing a flashing/blank temperature display. This version uses a quick-connect clip — no wire cutting or splicing like the genuine Whirlpool splice-kit version requires. Replaces W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944. Classic symptom: fridge or freezer running warmer than the setting, or running nonstop.
Common Problems This Part Fixes
Refrigerator or freezer running noticeably warmer than the temperature setting
Fridge running constantly and never cycling off
Temperature display flashing, showing dashes, or displaying an error code
Food freezing in the fresh food compartment when it shouldn't be
Compressor and fans not cycling normally, or running nonstop
Inconsistent or swinging temperature readings on the display
One compartment (fridge or freezer) running warm while the other stays normal
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator thermistor directly replaces the following OEM and cross-reference part numbers:
W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermistor is used across a wide range of Whirlpool-built refrigerators from the following brands:
Whirlpool refrigerators (including WRF535SMBM00, WRX735SDBM00, and related French door / side-by-side models)
KitchenAid refrigerators (including KBFS22EWBL1, KBFS22EWMS1, KBFS22EWMS3, KBFS22EWMS5, KBFS22EWMS7, KBFS22EWWH1)
Maytag refrigerators (select Whirlpool-built models, including KRFF302ESS)
Jenn-Air refrigerators (select Whirlpool-built models, including MFI2269VEM)
Amana refrigerators (select models)
Inglis refrigerators (select models)
Magic Chef refrigerators (select models)
Note: Many of these refrigerators use separate thermistors for the fresh food and freezer compartments, so confirm which sensor location your model uses before ordering — appearance can be similar across positions. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Direct-fit replacement refrigerator temperature thermistor — reports compartment temperature to the electronic control board
Resolves "running warm," "running constantly," "freezing food," and "flashing display" symptoms caused by thermistor failure
Quick-connect mounting clip — no wire cutting or splicing required
Matches OEM electrical resistance curve for accurate temperature sensing
Approximate lead length ~5 inches
Replaces W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944, and additional cross-reference numbers
Compatible with Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–30 minutes with basic hand tools
Product Specifications
Part Number
XPW10316760
OEM Part Number
W10316760
Part Type
Refrigerator Temperature Thermistor / Sensor
Condition
Aftermarket Replacement
Application
Whirlpool-Built Refrigerators (Fresh Food / Freezer Compartment)
Mounting
Quick-connect clip (no splicing)
Approx. Lead Length
~5 inches (may vary by model)
Compatible Brands
Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, Magic Chef
Installation Notes
⚠️ Disconnect Power Before Starting Unplug the refrigerator or shut off power at the breaker before accessing internal panels. Locate the thermistor at its mounting position inside the fresh food or freezer compartment (location varies by model — consult your model's parts diagram if unsure). Photograph the wire routing before disconnecting. On this XPARTCO version, simply unplug the old thermistor's connector from the wiring harness — no cutting or splicing needed. Release the old thermistor from its mounting clip or bracket and remove it. Install the new thermistor in the same position, securing it in its mounting clip. Plug the new thermistor's connector into the wiring harness, matching your photos. Reassemble any panels removed for access. Restore power and allow the refrigerator several hours to stabilize before checking temperatures. Tools needed: nut driver or screwdriver (for panel access), needle-nose pliers (for mounting clip).
Frequently Asked Questions
Is this the same as the genuine Whirlpool W10316760 thermistor?
It's a direct-fit aftermarket equivalent, not the genuine Whirlpool part. The key functional difference is installation: the genuine OEM version ships as a splice-in kit requiring you to cut the old wires and use included splice connectors, while this XPARTCO version has a quick-connect clip that simply plugs in — no splicing tools needed.
Will this fit my refrigerator?
W10316760 and its cross-reference numbers span a wide range of Whirlpool-built models across several brands. Confirm fit using your refrigerator's exact model number before ordering, since visually similar thermistors are used across different platforms and compartment locations. Contact our support team with your model number if you're unsure.
My fridge is warm but the freezer is fine (or vice versa) — could this part be the cause?
Yes. Most of these refrigerators use separate thermistors for the fresh food and freezer compartments, so a single failed sensor can cause one section to run warm while the other stays normal. Confirm which sensor location your model uses before ordering.
Do I need any tools to install this?
Basic hand tools to access the interior panel (typically a nut driver or screwdriver) plus needle-nose pliers to release the old mounting clip. Because this version uses a plug-style connector, no wire strippers, cutters, or splice connectors are needed — unlike the genuine OEM splice-kit version.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the electrical resistance curve, mounting position, and temperature-sensing function of the original W10316760 thermistor used in compatible Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WB13K10003 Surface Burner Spark Electrode
The XPARTCO WB13K10003 is an aftermarket replacement spark electrode for the surface burners on GE, Hotpoint, and Kenmore gas ranges. The electrode is the small ceramic-tipped component mounted at the burner head that actually creates the spark: when you turn the burner knob, the range's spark module sends a rapid series of high-voltage electrical pulses to the electrode, which arcs across a small gap to the metal burner cap. That spark ignites the gas flowing from the burner, and the clicking sound you hear while the knob is turned is literally the sound of that spark firing over and over until the burner catches.
Because the electrode's ceramic insulator is what keeps that high-voltage pulse contained to a precise spark path, even small damage matters: a hairline crack in the ceramic can let voltage leak to ground instead of arcing at the tip, carbon and grease buildup on the tip can insulate it just enough to weaken the spark, and the metal tip itself can corrode or erode after years of sparking. A failing electrode typically shows up as a burner that clicks normally but is slow to catch, catches with a small "whoof" as gas builds up before ignition, or doesn't spark at all while the other burners on the same range work fine. It directly replaces AP2020574, 244911, AH231266, EA231266, and PS231266. GE's internal part number for this electrode is WG02F05048.
Quick Answer
The XPARTCO WB13K10003 Surface Burner Spark Electrode fixes GE, Hotpoint, and Kenmore gas ranges where a specific burner clicks but won't light, sparks weakly or intermittently, or ignites with a delayed "whoof" instead of catching right away. Ceramic-tipped spark electrode for the surface burner. Replaces AP2020574, 244911, AH231266, EA231266, PS231266. If a burner doesn't click at all, the problem is more likely the spark module or igniter switch — not this electrode.
Common Problems This Part Fixes
A specific surface burner clicks but won't ignite, while other burners work fine
Burner sparks weakly, intermittently, or only from certain knob positions
Delayed ignition — a noticeable pause with gas smell before the burner catches with a "whoof"
Clicking sound that continues well after the burner has already lit
Visible carbon buildup, grease, or discoloration on the electrode tip
Cracked, chipped, or damaged ceramic insulator visible at the base of the electrode
Electrode tip that looks corroded, pitted, or eroded compared to a new one
No spark at all from one specific burner position
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This surface burner spark electrode directly replaces the following OEM and cross-reference part numbers:
WB13K10003, WG02F05048, AP2020574, 244911, AH231266, AGE261531, PD00035924, EA231266, PS231266
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This spark electrode is compatible with select gas surface burners on ranges from the following brands:
GE gas ranges — EGR2000, EGR3000, and EGR3001 series
GE gas ranges — J2B900 and JGB910 series
GE gas ranges — JGBP27 series
Hotpoint gas ranges (select GE-built models)
Kenmore gas ranges (select GE-built models)
Westinghouse, Monogram, Café, Moffat, and Profile gas ranges (select GE-built models)
Verified model numbers include: EGR2000EC0BB, EGR2000EC0CC, EGR2000EC0WW, EGR2000EC1BB, EGR2000EC1CC, EGR2000EC1WW, EGR3000ED0BB, EGR3000ED0CC, EGR3000ED0WW, EGR3000ED1BB, EGR3000ED2BB, EGR3000ED3BB, EGR3000EH1BB, EGR3001ED1SS, EGR3001ED2SS, EGR3001ED3SS, EGR3001EF1SS, EGR3001EH1SS, J2B900BEF1BB, J2B900CEF1CC, J2B900SEF1SS, J2B900SEF2SS, J2B900WEF1WW, JGB910BEC1BB through JGB910BEC4BB, JGB910CEC1CC through JGB910CEC4CC, JGB910SEC1SS through JGB910SEC3SS, JGB910WEC1WW through JGB910WEC4WW, and the JGBP27BEA1AD through JGBP27BEA5AD range.
Note: GE uses several visually similar spark electrodes across its gas range lineup that differ in overall length and mounting angle — for example, a related electrode sold under WB13K10014 is used on other burner positions and model platforms. Some customers have reported this electrode arriving slightly longer than the original but still fitting with room to spare; if your range has very tight clearance underneath, verify your exact model number and burner position before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement ceramic-tipped spark electrode for gas surface burner ignition
Directs high-voltage pulses from the spark module into a precise spark path at the burner cap
Resolves "clicks but won't light," "weak or intermittent spark," and "delayed ignition" symptoms caused by a worn or damaged electrode
Ceramic insulator construction resists heat and contains the spark path
Direct drop-in replacement — mounts to the same burner head bracket and wire connector
Replaces AP2020574, 244911, AH231266, EA231266, and PS231266
Compatible with GE, Hotpoint, Kenmore, Westinghouse, Monogram, Café, Moffat, and Profile gas ranges
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
WB13K10003
OEM Part Number
WB13K10003 (WG02F05048)
Part Type
Gas Range Surface Burner Spark Electrode
Condition
Aftermarket Replacement
Application
Gas Range Surface Burner Ignition
Tip Material
Ceramic-insulated electrode tip
Function
Directs spark module pulses to ignite burner gas
Mounting
Burner head bracket with wire lead connector
Quantity
1 electrode
Compatible Brands
GE, Hotpoint, Kenmore, Westinghouse, Monogram, Café, Moffat, Profile
Installation Notes
⚠️ Danger — Gas Appliance Turn off the gas supply to the range at the shutoff valve and unplug the range (or shut off its circuit breaker) before beginning any work near the burners or gas line. After reassembly, check every disturbed connection for leaks using a soapy water solution — bubbling indicates a leak. If you ever smell gas at any point during this repair, do not attempt to light the range or operate any switches; leave the area immediately and contact your gas utility or a qualified technician.
⚠️ Handle The Ceramic Insulator Carefully Wear work gloves. Remove the burner grate and burner cap from the affected position to access the electrode underneath. Photograph the electrode's mounting position and wire connection before removing anything. Most electrodes are held in place with a single screw and connect to the spark module via a simple push-on wire terminal — disconnect the wire first, then remove the mounting screw and lift the old electrode free. The ceramic insulator is more fragile than it looks; avoid gripping or prying on it directly, and handle it by the mounting bracket instead. Install the new WB13K10003 in the same position and orientation, making sure the tip sits at the correct gap and angle relative to the burner cap — too far and the spark won't reach the gas port, too close and it can short against the burner base. Reconnect the wire terminal, secure the mounting screw, and reinstall the burner cap and grate. Restore the gas supply and power, then test ignition at that burner position and check for leaks at any connection you touched before considering the job complete. Tools needed: Phillips or flat-blade screwdriver (model-dependent), soapy water for leak testing, work gloves.
Frequently Asked Questions
My burner doesn't click at all when I turn the knob. Is this the right part?
Probably not, at least not by itself. If a burner produces no clicking sound whatsoever, the issue is more likely the spark module (the component that generates the high-voltage pulses) or the igniter switch behind the knob, rather than the electrode itself — an electrode can't spark if it's never receiving a pulse in the first place. This electrode is the right fix when you hear clicking at that burner position but it fails to ignite, sparks weakly, or ignites with a delay.
The burner lights but with a small "whoof" and a delay. Is that dangerous?
A delayed ignition means gas is flowing and accumulating for a moment before the spark finally catches it, which is exactly the kind of small buildup that produces that "whoof" sound and flare. It's not something to ignore — a weak or intermittent electrode is the common cause, and replacing it restores immediate, reliable ignition. If delayed ignition continues after replacing the electrode, have the burner and gas supply checked by a qualified technician rather than continuing to use it.
Can I clean the electrode instead of replacing it?
Light cleaning can sometimes help if the tip is coated in grease or food residue — gently wiping the ceramic and metal tip with a dry cloth or a small amount of rubbing alcohol may restore a weak spark caused purely by surface buildup. But if you see a cracked or chipped ceramic insulator, a visibly eroded or pitted tip, or the spark still fails after cleaning, the electrode itself has degraded and cleaning won't fix that — replacement is the correct next step.
One burner sparks weakly but the others are fine. Does that rule out the spark module?
Yes, generally. The spark module typically drives all the surface burner electrodes from the same unit, so if only one position is affected while the rest spark normally, the shared module is very unlikely to be the cause — the problem is isolated to that one electrode (or its individual wire connection). If every burner is weak or unreliable at the same time, that points toward the spark module instead.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the ceramic insulator design, tip geometry, mounting bracket, and wire connector of the original WB13K10003 electrode used in compatible GE, Hotpoint, and Kenmore gas ranges.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
