Search results for "dishwasher heating"

6 Pack - XPARTCO 3392519 Dryer Thermal Fuse Replaces WP3392519 The XPARTCO 3392519 is an aftermarket replacement dryer thermal fuse compatible with select gas and electric dryers from Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Estate, Inglis, Crosley, Amana, Admiral, and Magic Chef. The thermal fuse is a critical one-time-use safety device mounted on the exhaust duct or blower wheel housing that monitors the dryer's operating temperature. When the dryer overheats — typically due to a clogged exhaust vent or restricted airflow — the thermal fuse permanently opens the circuit and cuts power to the heating system to prevent a fire. Once blown, the thermal fuse cannot be reset and must be replaced. This part measures 2 inches long x 1/2 inch wide, features two 3/16-inch terminals, and opens at approximately 196°F (91°C). Important: always check and clear the exhaust vent when replacing this fuse, as restricted airflow is the most common cause of thermal fuse failure. Quick Answer The XPARTCO 3392519 Dryer Thermal Fuse fixes dryers that won't start, won't heat, or stop mid-cycle due to overheating. It is a one-time-use safety fuse that permanently opens at 196°F (91°C) to cut power and prevent fires. Compatible with select Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Estate, Inglis, Crosley, Amana, Admiral, and Magic Chef dryers. Replaces WP3392519 and many other part numbers. Common Problems This Part Fixes Dryer won't start at all Dryer runs but produces no heat Dryer stops mid-cycle and won't restart Timer advances but drum does not heat Dryer shuts off too soon before clothes are dry No continuity detected across fuse terminals during testing Replaces Part Numbers This thermal fuse directly replaces the following OEM and cross-reference part numbers: 3392519, WP3392519, 3388651, WE4X857, G4AP0500, 6L4101, 6L4101091C, ET401, 3388651, 694511, 80005, AWP47582, PD00002311, EAP11741460, AP6008325, PS11741460 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This thermal fuse is compatible with select gas and electric dryers from the following brands: Whirlpool dryers (including Duet and Cabrio series) Kenmore / Sears dryers (including Elite series) KitchenAid dryers Maytag dryers (including Centennial and Neptune series) Roper dryers Estate dryers Inglis dryers Crosley dryers Amana dryers Admiral dryers Magic Chef dryers Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features One-time-use safety device — permanently opens at 196°F (91°C) to cut power and prevent dryer fires Mounts on the exhaust duct or blower wheel housing — easy access for DIY replacement Aftermarket replacement built to OEM-equivalent quality standards 2-terminal design — direct drop-in replacement, no modification required Broad compatibility across 11 major appliance brands DIY-friendly repair — installs with basic hand tools in under 30 minutes Budget-friendly safety fix — one of the most common and least expensive dryer repairs Product Specifications Part Number 3392519 Part Type Dryer Thermal Fuse Condition Aftermarket Replacement Application Gas and Electric Dryers Opening Temperature 196°F (91°C) Length 2 inches Width 1/2 inch Terminal Size 3/16 inch (2 terminals) Resettable No — one-time use only, must be replaced when blown Location on Dryer Exhaust duct / blower wheel housing Compatible Brands Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Estate, Inglis, Crosley, Amana, Admiral, Magic Chef Installation Notes ⚠️ Safety First — Unplug Dryer and Shut Off Gas Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. The thermal fuse is located on the exhaust duct or blower wheel housing — access it by removing the back or front panel depending on your dryer model. Disconnect the two wire terminals from the old fuse, remove the fuse from its bracket, install the new fuse in the same position, reconnect the terminals, and reassemble the panel. Tools needed: Phillips screwdriver, 1/4-inch nut driver, and a multimeter to confirm the new fuse has continuity. ⚠️ Important: Before completing the repair, always check and clear the exhaust vent of any lint buildup — a blocked vent is the most common cause of thermal fuse failure and will blow the new fuse if not corrected. Frequently Asked Questions Will the 3392519 fit my dryer? This thermal fuse is compatible with select gas and electric dryers from Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Estate, Inglis, Crosley, Amana, Admiral, and Magic Chef. Use the model search above to verify your model, or contact our support team before ordering. What does a dryer thermal fuse do? The thermal fuse is a one-time-use safety device that monitors the temperature inside the dryer. When the dryer overheats — typically due to a clogged exhaust vent — the fuse permanently opens the circuit, cutting power to the heating system to prevent a fire. Once blown, it cannot be reset and must be replaced. How do I know if my thermal fuse is blown? Test the fuse with a multimeter set to continuity mode. Touch the probes to each of the two terminals. A working fuse will show continuity (beep or near-zero ohms). A blown fuse will show no continuity (open circuit). If there is no continuity, the fuse is blown and must be replaced. Why did my thermal fuse blow? The most common cause is restricted airflow due to a clogged or kinked exhaust vent, a plugged lint trap, or a damaged blower wheel. Always check and clear the exhaust vent before or after replacing the fuse — failing to do so will cause the new fuse to blow again. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is designed to deliver reliable overheat protection at a more affordable price point. Shop With Confidence Parts-O-Matic is a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse. Our team is available to help you verify compatibility before you buy. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

ERP W10818686 Microwave Magnetron Fits Specific Whirlpool, Maytag, LG Microwave Models Replaces Parts Number:W10818686, 4283285, W10626122, W10754514, W10772114, AP5985080, PS11723130.    Warning:The magnetron uses high voltage, high current DC power to generate the microwave frequency that cooks the food. If the magnetron burns out, the microwave won’t heat. The magnetron is not repairable—if the magnetron is burned out, you must replace it. (Warning: The microwave oven can store a lethal amount of electricity in its high voltage capacitor, even after the microwave oven has been unplugged. Due to the high running voltage and the potential for electric shock, it is extremely dangerous to replace the electronic components in a microwave. Only a licensed technician should replace the magnetron.)   This is an aftermarket part that can be used as a replacement for the OEM part.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

100111369 Gas Control Valve/Thermostat W/ Lead Wires, Natural Gas (HSI Control Valves) This item replaces: 186300-000, 9006655005 Description  Gas Control Valve/Thermostat-Natural Gas (with lead wires). Used on Series 200/201 Used on Models: GCVL - 40 XCVL - 40 GCV - 40 XCV - 40 GCVH - 40L GCV - 50 XCV - 50 Type:       Natural Gas (NG) Series:       200/201 California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WD12X10304CM Dishwasher Top Rack Slide End Cap Clip Older Style Upper rack roller stop. White Replaces Part Number:  WD12X10304, 1556527, WD12X0344, WD12X344, WD30X97, AH2370502, EA2370502, OEM13454003, AP4484666, PS2370502. Description: This Rack Slide End Cap is a replacement part for specific GE dishwasher models. This small but essential component is designed to secure the end of the rack slide rail, preventing the dish racks from sliding off the track or becoming misaligned. This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

ERP DG62-00076B Surface Burner Base (Small) Burner head (aux) sm Burner-HEAD(AUX);NX583G0 for Samsung Gas Ranges Replaces Part Numbers: DG62-00076B, AP5653442, PS5576948.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

2188917CM Refrigerator Auger Motor Drive Shaft Assembly includes cooling fan, auger motor, and fill tube heater. Fits Specific Whirlpool, Maytag, Kenmore Refrigerator Models. Replaces Part Numbers:WP218891724, 2220187, 2220188, 2221087, 8206730, AP6006077, PS11739142.    This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

3149404CM Surface Element Infinite Switch 240V, 5.2-6.6 amp, replacement for Whirlpool. for 6" Burner Replaces Part Numbers:WP3149404, 3149404, 2711, 310179, 311847, 311856, 311857, 314144, 3148951,  AP6007668, PS11740785, W10295576, WP3149404VP. Description: This Infinite Switch is a replacement part for specific Whirlpool ranges and cooktops models. This part controls the temperature of the burner on electric ranges and cooktops by regulating the power supplied to the burner. The infinite switch allows for precise temperature settings, providing the flexibility to cook a wide variety of dishes by adjusting the heat level as needed.    This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WB27X10865 Microwave Genuine OEM Magnetron Fits Specific GE Microwave models Replaces Part Numbers: WB27X32766, WB27X10865, 4931231, AP6890576, PS12725839.    Warning:The magnetron uses high voltage, high current AC/DC power to generate the microwave frequency that cooks the food. If the magnetron burns out, the microwave won’t heat. The magnetron is not repairable—if the magnetron is burned out, you must replace it. (Warning: The microwave oven can store a lethal amount of electricity in its high voltage capacitor, even after the microwave oven has been unplugged. Due to the high running voltage and the potential for electric shock, it is extremely dangerous to replace the electronic components in a microwave. Only a licensed technician should replace the magnetron.)   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WB24T10058CM Infinite Switch for Radiant Element  240V, 15A, 2600W for radiant element. Fits GE glass top ranges. Replaces Part Numbers:WB24T10058, WB24T10031, AP2622889, PS236780.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WB32X10013CM 8" Burner Drip Pan Chrome drip bowl (also called a drip pan) for 8 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner. 8" Chrome pan/ring. Fits GE, Hotpoint range. Replaces Part Numbers: WB32X10013,  19950018, 7, WB32X0004, WB32X0010, WB32X0013, WB32X0014, WB32X0019, WB32X0025, WB32X0033, WB32X0034, WB32X10, WB32X10013B, WB32X10013R, WB32X13, WB32X14, WB32X19, WB32X25, WB32X33, WB32X34, WB32X34A, WB32X34B, WB32X34R, WB32X4, WB32X501, WB32X5012, WB32X5013, WB32X5027, AH244680, EA244680, AP2635055, PS244680.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO WE4X448 Dryer Flame Sensor Exact replacement dryer flame sensor for GE® & Speed Queen® models 120 VAC, 60Hz Dimensions: 3-3/4 x 2-3/4 x 2-1/4 Inches  Senses igniter for heat and opens the gas valve for the burner  Fits model specific dryer. Features/Benefits Also replaces: 55428 Fits GE® & Speed Queen® dryers See Cross Reference tab for additional numbers Senses igniter for heat and opens gas valve for burner Replaces Part Numbers: WE4X448, WE04X0448, TJ90DE355, AH268031, EA268031, AP2042635, PS268031, 55428.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

74005890 Gas Range Spark Electrode Set Product Title Aftermarket 74005890 Gas Range Spark Electrode Set - Compatible with Jenn-Air, Whirlpool Ranges, Includes 2 Electrodes, Terminal Block, Wires Product Description Ensure consistent burner ignition with the 74005890 Gas Range Spark Electrode Set from Parts-O-Matic. This high-quality aftermarket set replaces the original 74005890, featuring two spark electrodes, a terminal block, and wires for select Jenn-Air and Whirlpool gas ranges. Designed for reliable sparking, it’s ideal for fixing burners that fail to light, spark weakly, or cause continuous clicking. Enjoy free shipping on all orders at Parts-O-Matic! Key Features: ✅ Broad Compatibility: Fits select Jenn-Air, Whirlpool, and other brand gas range models. 🔥 Reliable Ignition: Includes two ceramic electrodes for consistent sparking to ignite burners efficiently. 💰 Cost-Effective Alternative: Aftermarket set offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Includes terminal block and wires for straightforward replacement; requires a Phillips screwdriver and 10–20 minutes. 🛡️ Fixes Common Issues: Resolves burners not lighting, weak sparks, continuous clicking, or gas smell without ignition. Compatibility: Compatible with models including but not limited to: Jenn-Air: JDS9860AAP, JDS9860ACB, JDS9860ACS, JDS9860ACW, JGR8850ADW Whirlpool: GW395LEPB, GW395LEPQ, GW395LEPS Replaces part numbers: WP74005890, 74005890, 74006098, 7432P120-60, 895262, AP6010920, PS11744110, EAP11744110, PD00004364 Verify compatibility with your appliance brand and model number, please contact Parts-O-Matic support for assistance. Installation Notes: Tools Needed: Phillips screwdriver, putty knife, needle nose pliers, 1x4 wood piece (to prop range top). Safety First: Unplug the range and shut off the gas supply before installation. Steps: Remove burner grates and caps, use a putty knife to release the range top’s spring clips, prop the top with a 1x4 wood piece, unscrew the old electrodes, disconnect the wires from the terminal block, and install the new electrodes and terminal block with included wires. Adjust the electrode tip if sparking is weak (avoid cracking the ceramic). Test burners after reassembly. Installation takes 10–20 minutes. Download our installation guide or watch our YouTube tutorial for step-by-step instructions. Shop Parts-O-Matic for high-quality aftermarket appliance parts with free shipping on all orders and a 30-day return policy. Get your gas range burners lighting perfectly today! Add to cart now for an affordable fix with free shipping on your entire order!

Read more less