Search results for "dryer thermal fuse"

3205241CM Washer Idler Pulley Spring  Washer Idler pulley spring. Fits Specific Electrolux, Frigidaire laundry centers Models. Replaces Part Numbers:3205241, AH446942, EA446942, AP2132055, PS446942.   This is an aftermarket part that can be used as a replacement for the OEM part.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO WH13X26534 Washer Water Valve Replaces Part Numbers: WH13X26534, WH13X25296, WH13X25297, AP6891106, PS12726768. Description: The Water Inlet Valve Assembly is a replacement part for specific GE washing machine models. It is responsible for regulating the flow of water into the washing machine during designated cycles. The water inlet valve opens and closes to allow water to enter the tub at the correct times and pressures. It works in coordination with other components to fill and drain the tub as needed.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

17438000001373 Washer Genuine OEM Water Level Sensor Assembly – Compatible with Midea, Insignia Washers Product Description Restore accurate water level detection and optimal washing performance with the 17438000001373 Washer Genuine OEM Water Level Sensor Assembly. This factory-original OEM sensor monitors water levels inside the washer and communicates with the control board to regulate fill cycles and ensure proper operation. A faulty sensor can lead to overfilling, underfilling, or cycles not completing correctly. Replacing it with this Genuine OEM assembly ensures precise sensing, proper communication with the control system, and long-lasting reliability. This part is manufactured to original factory specifications for dependable washer performance. Replaces Part Numbers 17438000001373, 302421600037, PS18188481 (verify if needed) Compatibility This Genuine OEM washer water level sensor assembly fits select Midea, Insignia washers. Common compatible models include (but are not limited to): Midea MAD160S2801GPSFMUS13, MLV41N1AWW, MAD160S2801PS, CTW41N1AW, MLV41N1AWWC, CLAWI47W, ATLMW41, CTW45N1AW, CTW45N2AW, CTW45N2AW, CTW45N1AW Always verify your washer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🏭 Genuine OEM Part – Manufactured to original factory specifications 💧 Accurate Water Level Detection – Ensures proper fill and cycle control ⚙️ Fixes Common Issues – Resolves overfill, underfill, and sensor errors 🧩 Complete Sensor Assembly – Ready for direct installation 💪 Reliable Performance – Designed for long-term durability ⚠️ Symptoms If your washer is experiencing any of the following issues, this part may need replacement: 💧 Washer overfilling or underfilling ⚠️ Incorrect water levels during cycles 🔄 Cycle not completing properly 🛑 Washer stopping mid-cycle 🚫 Continuous filling or no fill condition Replacing this sensor assembly can restore proper water level control and washer operation. 📐 Product Specification Part Number: 17438000001373 Component Type: Washer Water Level Sensor Assembly Function: Detects water level and communicates with control board Connection Type: Electrical connector + pressure sensing system Application: Washer fill and cycle control system OEM Status: Genuine OEM 🛠️ Installation Notes Tools Needed: Phillips screwdriver ⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock. Basic Steps: Disconnect washer power. Access the control panel or top panel. Locate the water level sensor assembly. Disconnect wiring and any attached pressure hose. Remove mounting screws and remove the old sensor. Install the new 17438000001373 Genuine OEM sensor. Reconnect wiring, reassemble, and restore power. Run a test cycle to confirm proper operation. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🏭 Genuine OEM Appliance Part 🚚 Free Shipping on All Orders 🔄 30-Day Return Policy Restore factory-level washer performance and accurate water control — Add to Cart Now with confidence!

Read more less

ERP DC97-05280W Washer Suspension Rod Replaces Part Numbers: DC97-05280W, 3998024, AP5966911, PS11719937   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WH16X26913 Washer Genuine OEM Suspension Rod and Spring Rod and spring asm right- black Description: The Rod and Spring Asm Right-Black is an OEM replacement part for GE washing machines. It is responsible for providing the necessary tension and support for the washer drum. This assembly includes a durable rod and spring that work together to balance the drum and minimize excessive vibrations during the wash and spin cycles. Replaces Parts Numbers: WH16X26913, WH16X26714, AP6331892, PS12343383. California Residents only WARNING: California’s Proposition 65 

Read more less

Genuine Refrigerator Replacement Part DA97-12625A Refrigerator Genuine Auto-Close Lever Genuine auto-close lever for select refrigerator door hinge and closure systems. Product Overview The DA97-12625A Refrigerator Auto-Close Lever is a genuine replacement part designed for compatible refrigerators. The lever works with the door hinge and closure mechanism to help guide the refrigerator door into the proper closed position. Use this part when the original lever is cracked, worn, broken, loose, or no longer helping the door close correctly. Quick Answer DA97-12625A is a genuine refrigerator auto-close lever for compatible door closure assemblies. Replace it when the original lever is damaged or the door no longer closes and aligns as intended. Common Problems This Part May Fix Refrigerator door does not close smoothly Door does not pull fully into the closed position Auto-close action is weak or inconsistent Lever is cracked, broken, or worn Door alignment changes near the closed position Replaces and Cross-References DA97-12625A, DA97-13070A, 3527780, AP5620329, ASM32839, EAP4176636, PD00027974, PS4176636 Part number is provided for identification. This listing is for a genuine replacement part. Compatibility Fits select refrigerators that specify auto-close lever part number DA97-12625A. Important: Verify the complete refrigerator model number, door position, and original lever part number before ordering. Similar-looking hinge and closure components may differ by model or door side. Key Features Genuine replacement part Designed for compatible refrigerator door closure systems Helps guide the door into the closed position Supports proper door alignment near closing Direct replacement for applications calling for DA97-12625A Product Specifications Part Number DA97-12625A Part Type Refrigerator Auto-Close Lever Application Compatible Refrigerator Door Systems Function Assists door closing and alignment Condition New Part Quality Genuine Replacement Part Package Quantity 1 Auto-Close Lever Installation & Troubleshooting Notes Disconnect refrigerator power before service. Support the door if hinge or closure hardware must be loosened or removed. Inspect the original auto-close lever for cracks, wear, deformation, or looseness. Check nearby hinge and closure components for related wear or damage. Install the replacement lever in the same position and orientation as the original. Confirm the door opens, aligns, and closes smoothly before returning the refrigerator to normal use. Diagnostic tip: A door that does not close correctly may also have worn hinges, loose mounting hardware, cabinet leveling issues, or gasket interference. Inspect the full door system before replacing only the lever. Frequently Asked Questions What does DA97-12625A do? It works with the refrigerator door closure system to help guide the door into the proper closed position. Is DA97-12625A a genuine part? Yes. This listing is for a genuine refrigerator auto-close lever. When should this lever be replaced? Replace it if it is cracked, broken, excessively worn, loose, or no longer supporting proper door closing. Will this fit every refrigerator? No. Match the complete refrigerator model number, door position, and original part number before ordering. Shop With Confidence Verify your complete refrigerator model number before purchasing. Our compatibility team can help confirm whether DA97-12625A is correct for your appliance. Genuine ReplacementDoor Closure PartModel Fitment SupportFast U.S. Shipping

Read more less

Genuine Whirlpool OEM Part Whirlpool W10918008 Refrigerator Door Closer - Gray (Left Hand) Left-hand gray refrigerator door closer for the door hinge and closing assembly. Quick Answer W10918008 is a genuine Whirlpool OEM left-hand gray refrigerator door closer. It works with the door hinge and closure mechanism to help guide the refrigerator door into its proper closed position and replaces earlier part number W10833741. Product Description The W10918008 door closer works with the refrigerator door hinge and closing mechanism to guide the left-hand fresh-food door through the final portion of its closing movement. The closer helps the door settle into its intended closed position as the hinge moves. A cracked or worn closer can cause the door to close unevenly, need extra force near the end of travel, or fail to settle into position correctly. A door that remains partially open can allow cold air to escape, which may contribute to temperature problems, condensation, frost, and longer compressor run time. Symptoms This Part Fixes Left-hand refrigerator door does not close smoothly Door needs an extra push near the fully closed position Door feels uneven or shifts as it closes Auto-closing action is weak or inconsistent Original closer is visibly cracked, worn, or broken Door does not settle securely into its normal closed position Replaces Part Numbers Use these verified numbers to identify the correct replacement: W10918008, W10833741, 4461320, AP6038207, AWP42675, EAP11770044, PD00065465, PS11770044 Cross-reference numbers are listed for identification only. This listing ships the genuine Whirlpool OEM part. Compatibility Fits select Whirlpool-built refrigerators that specify part number W10918008, including the following verified model examples: WRF532SNHZ06 · JFC2089BEP07 · MFC2062FEZ08 · WRF535SMHZ06 · KRFF302ESS05 · MFI2570FEZ12 · WRF535SWHZ06 · KRFF302EWH04 · WRFA35SWHZ06 · WRF535SMHZ07 ⚠️ Important: This is the left-hand gray door closer. Always verify your refrigerator's complete model number, door side, and original part number before ordering. Contact our support team if you're unsure. Key Features Genuine Whirlpool OEM replacement part Manufacturer part number W10918008 Left-hand refrigerator door position Gray finish Replaces previous part number W10833741 Designed for the refrigerator door closing and hinge assembly Product Specifications Part Number W10918008 Brand Whirlpool Part Type Refrigerator Door Closer / Closing Cam Assembly Refrigerator Door / Hinge Closing Assembly Position Left Hand Color Gray Function Helps guide the refrigerator door into the closed position Part Quality Genuine Whirlpool OEM Condition New Installation Notes Disconnect refrigerator power before service. Support the refrigerator door before loosening or removing hinge-related hardware. Confirm that the existing closer is on the left-hand side and matches W10918008 or previous part number W10833741. Inspect the closer, hinge, mounting points, and nearby hardware for cracks, wear, looseness, or deformation. Remove the original closer while noting its installed position and orientation. Install W10918008 in the same left-hand position. Reassemble the hinge hardware and verify that the door opens, aligns, and closes normally. ⚠️ Diagnostic tip: Poor door closing can also be caused by worn hinge components, loose hardware, cabinet leveling problems, or gasket interference. Inspect the complete door system before replacing only the closer. Frequently Asked Questions What does Whirlpool W10918008 do? W10918008 is the left-hand refrigerator door closer. It works with the door hinge and closing mechanism to help guide the door through the final portion of its travel and into the proper closed position. Is W10918008 a genuine Whirlpool OEM part? Yes. W10918008 is a genuine Whirlpool OEM refrigerator door closer. It is used on select Whirlpool-built refrigerator models and brands. How can I check whether the door closer is actually damaged? Open the left-hand refrigerator door and slowly move it through the final portion of closing while watching the lower hinge and closer area. If the closer is visibly cracked, broken, deformed, loose, or fails to move smoothly while the hinge hardware remains secure, the closer may need replacement. Does the left-hand position matter? Yes. W10918008 is specifically identified as the left-hand gray door closer. The matching right-hand closer is a different part, so verify the door side and complete appliance model before ordering. Why should I match the model number instead of comparing the part visually? Door closers can look very similar while having different geometry, mounting points, colors, or left/right orientation. Matching the complete refrigerator model and manufacturer part number is more reliable than appearance alone. What should I inspect while replacing the closer? Inspect the hinge, mounting hardware, door alignment, and gasket contact while the door is supported. If another closure component is worn or loose, replacing the closer alone may not fully correct the door problem. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

ERP DC97-05280S Washer Suspension Rod Replaces Part Numbers: DC97-05280S, 3998020, AP5799907, PS8764053   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO DC66-00887A Washer Pulsator Cap – Compatible with Samsung Washers Product Description Replace your worn or missing washer pulsator cap with the XPARTCO DC66-00887A Washer Pulsator Cap. This high-quality aftermarket replacement protects the central bolt of the pulsator (wash plate) from water intrusion and corrosion. A damaged or missing cap can lead to imbalance, leaks, or noise during spin cycles. Installing this part restores proper drum function and extends the washer’s lifespan. Replaces Part Numbers DC66-00887A, PD00038471, EAP11762121, AP6027557, 4814077, PS11762121. Compatibility This replacement pulsator cap fits select Samsung top-load washers. Example compatible models include (but are not limited to):Samsung WA45H7000AW/A2, WA400PJHDWR/AA, WA422PRHDWR/AA Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Compatible with Samsung top-load washers 💧 Protective Design – Prevents water from reaching the pulsator bolt 💰 Budget-Friendly Fix – Quality replacement at a lower cost than OEM 🛠️ Simple Installation – Snaps securely into place in seconds 🛡️ Fixes Common Issues – Resolves missing, cracked, or leaking pulsator caps 📐 Product Specification Part Number: DC66-00887A Component Type: Washer Pulsator (Wash Plate) Cap Material: Durable, water-resistant plastic Mounting: Snap-fit installation, tool-free Operating Conditions: Designed for residential top-load washers Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: None ⚠️ Safety First: Always unplug the washer before performing repairs. Steps: Unplug washer and open lid. Remove any debris around the pulsator area. Gently pry off the old cap using a flathead screwdriver if needed. Align and press the new XPARTCO DC66-00887A cap firmly until it clicks. Confirm a tight seal before restarting the washer. ⏱️ Time Required: 5 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore your washer’s performance — Add to Cart Now for a reliable, affordable replacement!

Read more less

DC62-00223A Washer Center Tub Seal – Replacement for Samsung Washers Product Overview The Center Tub Seal is a replacement part compatible with Samsung washers. This seal is located on the center tub assembly and provides a watertight barrier between the inner and outer tubs. It prevents water from leaking out during the wash cycle. Fits Specific Samsung Washer Models. Replaces Part Numbers This seal replaces DC62-00223A, AP4211943, PS4208713. Designed to match the original dimensions and performance of the factory part. Compatible Brands Compatible with Samsung front-load washer models, Fits various models that require a shaft-to-tub seal of this type. Fixes the Following Issues Water leaking from under the washer Noisy spin cycle due to worn seal Mold or mildew forming near tub bearing Internal water damage from leaking shaft area Why Buy from Parts‑O‑Matic Reliable aftermarket quality Fast and free U.S. shipping Helps extend washer lifespan and prevent damage Trusted by repair professionals and homeowners

Read more less

Genuine Whirlpool OEM Part Whirlpool W10918010 Refrigerator Door Closer - Gray (Right Hand) Right-hand gray refrigerator door closer for the door hinge and closing assembly. Quick Answer W10918010 is a genuine Whirlpool OEM right-hand gray refrigerator door closer. It works with the door hinge and closure mechanism to help guide the refrigerator door into its proper closed position and replaces earlier part number W10833739. Product Description The W10918010 door closer works with the refrigerator door hinge and closing mechanism to guide the right-hand fresh-food door through the final portion of its closing movement. The shaped closer surface helps the door settle into its intended closed position as the hinge moves. A cracked or worn closer can cause the door to close unevenly, need extra force near the end of travel, or fail to settle into position correctly. A door that remains partially open can allow cold air to escape, which may contribute to temperature problems, condensation, frost, and longer compressor run time. Symptoms This Part Fixes Right-hand refrigerator door does not close smoothly Door needs an extra push near the fully closed position Door feels uneven or shifts as it closes Auto-closing action is weak or inconsistent Original closer is visibly cracked, worn, or broken Door does not settle securely into its normal closed position Replaces Part Numbers Use these verified numbers to identify the correct replacement: W10918010, W10833739, 4461321, AP6038208, AWP42677, EAP11770045, PD00073761, PS11770045 Cross-reference numbers are listed for identification only. This listing ships the genuine Whirlpool OEM part. Compatibility Fits select Whirlpool-built refrigerators that specify part number W10918010, including the following verified model examples: WRF532SNHZ06 · JFC2089BEP07 · MFC2062FEZ08 · WRF535SMHZ06 · KRFF302ESS05 · MFI2570FEZ12 · WRF535SWHZ06 · KRFF302EWH04 · WRFA35SWHZ06 · WRF535SMHZ07 ⚠️ Important: This is the right-hand gray door closer. Always verify your refrigerator's complete model number, door side, and original part number before ordering. Contact our support team if you're unsure. Key Features Genuine Whirlpool OEM replacement part Manufacturer part number W10918010 Right-hand refrigerator door position Gray finish Replaces previous part number W10833739 Designed for the refrigerator door closing and hinge assembly Product Specifications Part Number W10918010 Brand Whirlpool Part Type Refrigerator Door Closer Assembly Refrigerator Door / Hinge Closing Assembly Position Right Hand Color Gray Function Helps guide the refrigerator door into the closed position Part Quality Genuine Whirlpool OEM Condition New Installation Notes Disconnect refrigerator power before service. Support the refrigerator door before loosening or removing hinge-related hardware. Confirm that the existing closer is on the right-hand side and matches W10918010 or previous part number W10833739. Inspect the closer, hinge, mounting points, and nearby hardware for cracks, wear, looseness, or deformation. Remove the original closer while noting its installed position and orientation. Install W10918010 in the same right-hand position. Reassemble the hinge hardware and verify that the door opens, aligns, and closes normally. ⚠️ Diagnostic tip: Poor door closing can also be caused by worn hinge components, loose hardware, cabinet leveling problems, or gasket interference. Inspect the complete door system before replacing only the closer. Frequently Asked Questions What does Whirlpool W10918010 do? W10918010 is the right-hand refrigerator door closer. It works with the door hinge and closing mechanism to help guide the door through the final portion of its travel and into the proper closed position. Is W10918010 a genuine Whirlpool OEM part? Yes. W10918010 is documented as a genuine Whirlpool OEM refrigerator door closer. It is also used on select Whirlpool-built appliance brands and models. How can I check whether the door closer is actually damaged? Open the right-hand refrigerator door and slowly move it through the final portion of closing while watching the lower hinge and closer area. If the closer is visibly cracked, broken, deformed, loose, or fails to move smoothly while the hinge hardware remains secure, the closer may need replacement. Does the right-hand position matter? Yes. W10918010 is specifically identified as the right-hand gray door closer. The matching left-hand closer is a different part, so verify the door side and complete appliance model before ordering. Why should I match the model number instead of comparing the part visually? Door closers can look very similar while having different geometry, mounting points, colors, or left/right orientation. Matching the complete refrigerator model and manufacturer part number is more reliable than appearance alone. What should I inspect while replacing the closer? Inspect the hinge, mounting hardware, door alignment, and gasket contact while the door is supported. If another closure component is worn or loose, replacing the closer alone may not fully correct the door problem. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO DC62-30314V Washer Water Valve – Compatible with Samsung & Kenmore Washers Product Description Restore proper water filling and reliable washer performance with the XPARTCO DC62-30314V Washer Water Valve. This high-quality aftermarket replacement precisely controls hot and cold water flow into the washer during fill cycles. A faulty inlet valve can cause no-fill issues, slow filling, water leaks, or error codes. Replacing it with this durable XPARTCO valve helps restore correct water pressure and dependable wash operation. Replaces Part Numbers DC62-30314V, PD00054103, EAP11719664, AP5966634, 3992464, PS11719664. Compatibility This replacement washer water inlet valve fits select Samsung and Kenmore (Samsung-manufactured) washers. Example compatible models include (but are not limited to):Samsung WF45R6100AW, WF42H5000AWKenmore 592.49045, 592.49303 Always verify your washer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM fit and water-flow performance 💧 Accurate Water Control – Ensures proper filling during wash cycles 🔧 Durable Solenoid Design – Built for consistent operation and long service life 💰 Cost-Effective Repair – Reliable alternative to OEM pricing 🛡️ Fixes Common Issues – Resolves no-fill, slow fill, leaks, or water inlet errors 📐 Product Specification Part Number: DC62-30314V Component Type: Washer Water Inlet Valve Voltage: 120V AC Water Connections: Hot & Cold Material: Reinforced plastic body with metal solenoids Mounting: Rear cabinet direct-fit Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, pliers, towel or shallow pan ⚠️ Safety First: Unplug the washer and shut off the water supply before servicing. Steps: Disconnect power and turn off water supply. Remove the rear access panel. Disconnect inlet hoses and wiring harness. Remove mounting screws and take out the old valve. Install the new XPARTCO DC62-30314V valve and secure it. Reconnect hoses and wiring, restore water and power, and test for leaks. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore proper washer filling and dependable performance — Add to Cart Now for a reliable, budget-friendly repair!

Read more less