XPARTCO WB24X10146 Microwave Door Switch
The XPARTCO WB24X10146 is an aftermarket replacement micro switch (also called a door interlock switch) compatible with a wide range of GE, Hotpoint, RCA, Kenmore, and Sears over-the-range and countertop microwaves. This is a "stand on" style normally-open (NO) interlock switch, identified by the internal designation KW3A-NO, that mounts near the door latch and only closes its circuit when the door is fully shut and latched. The control board reads this switch as part of a multi-switch safety interlock chain that confirms the door is secure before allowing the magnetron to energize.
When this switch fails, the microwave commonly won't start at all, trips a door-related error code, or in rare cases can allow the unit to run with the door not fully secured — which is a safety-relevant fault, not just a convenience one. It directly replaces WB24X10146, WB24X28941, MW-7100-33, AGE22794, AH1019163, AP3866977, 1166990, EA1019163, EAP1019163, PD00039881, PS1019163. Installs in 15–20 minutes with basic hand tools.
Quick Answer
The XPARTCO WB24X10146 Microwave Door Switch fixes GE, Hotpoint, RCA, and Kenmore/Sears microwaves that won't start, display a door-related error code, or have a door that doesn't reliably confirm as closed. Normally-open (NO) "stand on" interlock switch, rated 250VAC / 16A, with 0.187" (4.7mm) quick-connect terminals. Replaces WB24X10146, WB24X28941, MW-7100-33, AGE22794, AH1019163, AP3866977, 1166990, EA1019163, EAP1019163, PD00039881, PS1019163. Classic symptom: turntable light and display work, but pressing Start does nothing.
Common Problems This Part Fixes
Microwave won't start when Start is pressed, even though the display and light work
Door-related error code or fault light on the display
Microwave randomly shuts off mid-cycle
Door feels like it isn't latching or registering as closed
Clicking sound from the door area with no response from the microwave
Intermittent operation that seems tied to how hard the door is closed
⚠ Safety-Relevant Component Door interlock switches are safety components that prevent the magnetron from energizing unless the door is fully closed and latched. Never bypass, jumper, or defeat a microwave door switch to "get it working" — doing so can allow microwave energy to leak while the door is open, which is a genuine radiation safety hazard. Always disconnect power before servicing, and replace all interlock switches in the chain if more than one shows signs of wear.
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This microwave door switch directly replaces the following OEM and cross-reference part numbers:
WB24X10146, WB24X28941, MW-7100-33, AGE22794, AH1019163, AP3866977, 1166990, EA1019163, EAP1019163, PD00039881, PS1019163
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door switch is compatible with a wide range of GE-built microwaves across the following brands:
GE over-the-range and countertop microwaves (JVM, PVM, and CEB series, including JEM3072DH1BB, JEM3072SH1SS, JNM3161DF2BB, and CCWK15C1W1DS/SS)
Hotpoint microwaves (GE-built models)
RCA microwaves (GE-built models)
Kenmore and Sears microwaves (select GE-built models)
Note: Do not confuse this with the similarly styled EXP499/EXP497 microwave door switches, which also use 4.7mm terminals but are not the same switch. WB24X10146 is a "stand on" style switch specific to GE's own interlock design — always match by part number, not terminal size alone. Always verify your appliance model number before ordering.
Key Features
Normally-open (NO) "stand on" door interlock switch, internal designation KW3A-NO
Resolves "won't start," "door error code," and "shuts off mid-cycle" symptoms caused by interlock switch failure
Rated 250VAC / 16A for reliable switching under microwave load
0.187" (4.7mm) quick-connect terminals for a secure wire connection
Direct-fit mounting to match the original interlock bracket
Replaces WB24X10146, WB24X28941, MW-7100-33, AGE22794, AH1019163, AP3866977, 1166990, EA1019163, EAP1019163, PD00039881, PS1019163
Compatible with GE, Hotpoint, RCA, Kenmore, and Sears microwaves across dozens of models
Aftermarket replacement built to OEM-equivalent quality and safety standards
Product Specifications
Part Number
XPWB24X10146
OEM Part Number
WB24X10146
Part Type
Microwave Door Interlock Switch ("Stand On" / KW3A-NO)
Condition
Aftermarket Replacement
Switch Type
Normally Open (NO)
Voltage Rating
250VAC
Current Rating
16A
Terminal Width
0.187" (4.7mm)
Compatible Brands
GE, Hotpoint, RCA, Kenmore, Sears
Installation Notes
⚠️ Unplug Microwave Before Starting Disconnect power at the outlet, and for built-in/over-the-range units also switch off the dedicated circuit breaker — microwaves store high voltage in the capacitor even after unplugging. Remove the outer cabinet or control panel cover to access the door switch assembly near the latch mechanism. Photograph the wiring before disconnecting, since GE microwaves typically use two or three interlock switches wired in sequence and mixing up the connections can leave the unit unsafe to operate. Disconnect the quick-connect terminals from the old switch, noting which wire goes to which terminal. Remove the mounting screw(s) holding the switch to its bracket and remove the old switch. Install the new WB24X10146 in the same position and secure it with the mounting screw(s). Reconnect the terminals exactly as photographed. Reassemble the cabinet or panel, restore power, and test that the door registers correctly and the microwave starts normally. Tools needed: Phillips screwdriver, nut driver (for cabinet screws).
Frequently Asked Questions
My microwave's display and turntable light work, but it won't start — is this the part?
This is a classic symptom of a failed door interlock switch. The control board needs a confirmed "door closed and latched" signal from all switches in the interlock chain before it will energize the magnetron. If that signal is missing from even one switch, most GE microwaves will power up normally but refuse to start a cook cycle. Confirm with a multimeter continuity test on the suspect switch before ordering, since GE microwaves usually use more than one interlock switch.
Is this the same as the EXP499 or EXP497 microwave door switch?
No — while all three use similar 4.7mm terminals, they are different switches used in different microwave platforms and are not interchangeable. WB24X10146 is GE's own "stand on" KW3A-NO design. Always match by part number rather than terminal size or general appearance.
Is it safe to keep using the microwave if I suspect this switch is bad?
We'd recommend not continuing to use it until it's repaired. Door interlock switches exist specifically to prevent microwave energy from leaking out while the door is open or not fully latched. If a switch is failing intermittently, the microwave may seem to work sometimes, but that's not a reason to keep using it — replace the switch before further use, and never attempt to bypass or jumper an interlock switch.
How many interlock switches does my GE microwave have, and do I need to replace them all?
Most GE microwaves use two or three interlock switches wired in sequence (often a primary switch, a secondary/monitor switch, and sometimes a door sensing switch). You typically only need to replace the specific switch that's testing bad, but if one has failed from age or wear, the others are often not far behind — some technicians replace the full set at once to avoid a repeat repair call.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 4400EL2001F Dryer Drum Belt – Compatible with LG & Kenmore Dryers
Product Description
Restore proper drum rotation and reliable drying performance with the XPARTCO 4400EL2001F Dryer Drum Belt. This high-quality replacement belt, designed for select LG and Kenmore dryers, connects the motor pulley to the drum and idler pulley, enabling efficient tumbling during drying cycles. Made of durable rubber with a 4-rib, 3-groove design, it fixes issues like the drum not turning, loud banging or squeaking noises, or extended drying times due to a worn or broken belt.
Note: Includes one 92-inch belt. Inspect drum rollers, idler pulley, and drum for wear during replacement. Clean lint from the drum and cabinet to prevent overheating. Overloading the dryer can cause premature belt failure.
Replaces Part Numbers
4400EL2001F, 4400EL2001A, AP4436354, 4PH2337, PS3522928, 4400EL2001C, 4400EL2001E, PD00026116, EAP11705916, AP5972814, PS11705916.
Compatibility
This replacement dryer drum belt fits select LG and Kenmore (LG-manufactured) electric dryers.
Example compatible models include (but are not limited to):
LG DLE2516W, DLE7177WM, DLGX3571W, DLE7200WE, DLEX3570V, DLEX3570W, DLEX7600KE, DLEX7600WE, DLEY1901KE, DLEY1901WE, DLG4971W, DLGX5781VE, DLGX5781WE, DLGX7601KE, DLGX7601WE, DLGY1702V, DLGY1902KE, DLEX5101V, DLE5955W, DLE5977S, DLE0442W, DLGX3371V
Kenmore 796.80272900, 796.81073310, 79661552610, 79661553610, 79671552610, 79671553610, 79681392610, 79681393610, 79691392610, 79691393610
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM length, width, and rib pattern
🌀 Restores Drum Rotation – Ensures smooth, consistent dryer operation
🔇 Reduces Noise & Slippage – Helps eliminate squealing or drum stoppage
💪 Heavy-Duty Rubber Construction – Designed for long service life
💰 Cost-Effective Repair – Reliable alternative to OEM dryer belts
📐 Product Specification
✅ Brand and Models Compatibility: Fits select LG and Kenmore dryer models.
🔥 Specifications: 4-rib, 3-groove poly-V belt, black rubber, ~92"L x 1/4"W x 1/16"H, designed for durability and precise fit.
💰 Cost-Effective Alternative: Replacement belt offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires a putty knife, Phillips screwdriver, flat-blade screwdriver, work gloves, optional second person; typically installed in 30–60 minutes.
🛡️ Reliable Fixes: Resolves drum not tumbling, loud noises, or extended drying times.
Safety First: Unplug the dryer from the power source and, for gas dryers, shut off the gas valve before installation.
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock.
Basic Steps:
Disconnect dryer power.
Open the dryer cabinet and remove the drum.
Remove the worn or broken belt.
Install the new XPARTCO 4400EL2001F belt around the drum and motor pulley.
Reinstall the drum and reassemble the dryer.
Restore power and run a test cycle.
⏱️ Time Required: 30–45 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore smooth, reliable dryer operation — Add to Cart Now for a dependable, budget-friendly repair!
197XP Dryer Thermostat Kit – Replaces 279816, WP3977767, W10900067 – Compatible with Whirlpool, Kenmore, Maytag, and Amana Dryers
Product Description
Restore safe and efficient drying performance with the 197XP Dryer Thermostat Kit. This high-quality aftermarket replacement includes both a high-limit thermostat and a thermal cut-off fuse to regulate dryer temperature and prevent overheating. A failed thermostat or cut-off can cause long dry times, no-heat conditions, or overheating. Installing this complete kit ensures dependable temperature control and long-lasting dryer operation.
Replaces Part Numbers
279816, 2651, 279816VP, 3399848, 3977393, AH334299, AP3094244, EA334299, PS334299, WP3977767, 3977767, 3399693, 898078, AP6009043, ER3977767, PS11742185, SET185, TJ90SET185, WP3977767VP, W10900067, PD00046493, EAP11769432, AP6036100, PS11769432.
Compatibility
This replacement thermostat kit fits select Whirlpool, Kenmore, Maytag, Amana, Roper, Crosley, and Estate dryers.
Example compatible models include (but are not limited to): Whirlpool WED4815EW1, Kenmore 110.87562602, and Amana NED4655EW1.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM temperature ratings and safety standards
🔥 Dual-Protection Design – Includes thermal cut-off fuse and high-limit thermostat for overheat prevention
💰 Affordable Alternative – Provides OEM-level performance at a lower cost
🛠️ Easy DIY Installation – Pre-terminated connectors and hardware for quick repair
🛡️ Fixes Common Issues – Solves dryer not heating, overheating, or short-cycling problems
📐 Product Specification
Part Number: 197XP
Temperature Ratings: 309* degree F Thermal Fuse with L250-80* degree F Limit Thermostat.
High Limit Thermostat and Thermal Fuse for the Heater.
No need to splice any wires, no re wiring needed.
Component Type: Dryer Thermal Cut-Off & High-Limit Thermostat Kit
Includes: Thermal cut-off fuse, high-limit thermostat, mounting hardware, and wire connectors
Material: Metal thermostat housing with heat-resistant wiring
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Nut driver, Phillips screwdriver
⚠️ Safety First: Always unplug the dryer before performing any repairs to prevent electrical shock.
Steps:
Disconnect power and remove the back panel of the dryer.
Locate the heater housing and identify the existing thermostat and cut-off fuse.
Remove wires and mounting screws from old components.
Install the new 197XP thermostat kit in the same positions.
Reconnect wires, reassemble the panel, and restore power.
Run a drying cycle to confirm proper operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Protect your dryer and restore heat safely — Add to Cart Now for a reliable, budget-friendly repair!
XPARTCO W10542314 Dishwasher Gasket (Without Door Strike)
Fits Specific Whirlpool, Kenmore, Maytag Dishwasher models.
Door Gasket Only (Strike is not included)
Description: This dishwasher gasket and strike kit (W10542314) is designed for a secure and leak-proof seal on your dishwasher. It ensures a tight closure and proper functioning for your appliance. Trust in XPARTCO for expert solutions and reliable performance with your dishwasher.
Replaces Part Numbers:W10542314, 2409202, 8268888, W10284090, W10300589, W10350162, W10542314VP, AP5650274, PS5136129.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
🚪 XPARTCO 131658800 Dryer Door Catch
This Door Catch is a replacement part for specific Kenmore, Frigidaire dryer models. It includes the door catch. This part ensures the dryer door remains securely closed during operation, preventing heat loss and ensuring the appliance functions efficiently. Common causes of a bad door catch include regular wear and tear, physical damage, or misalignment of the door, which can impact the catch's ability to latch properly.
Fix a loose or non-latching dryer door with this aftermarket replacement for part number 131658800. This dryer door catch holds the dryer door securely closed during operation to ensure proper airflow and drying performance. Designed to fit many Frigidaire, Kenmore, Electrolux, and Crosley dryers.
✅ Key Features:
High-quality aftermarket replacement for part #131658800
Made from durable plastic for long-lasting use
Designed to securely latch the door shut
Simple snap-in installation — no tools required
Helps prevent cycle interruption due to door opening
🔁 Replaces OEM Part Numbers:
131658800, 131658820, 131658845, 00634863, 07521419, 08015370, 134548000, 134548045, 3004967, 3202755, 3281055, 5303281055, 5307521419, 7521419, 835, AH418433, EA418433, F141735-000, F141735000, F62661-4, K1300884, K1301594, K1308079, K1309301, N8010215, Q0000401002, Q000504551, Q000504553, Q504551, Q504553, WQ504551, WQ504553, AP2107362, PS418433, WE01X25316, AP6037347, 4512762, PS11766999.
⚠️ Common Symptoms Fixed:
Dryer door won’t stay closed
Dryer won’t start due to open door switch
Door pops open during a cycle
Visible wear or damage to original catch
🧰 Compatible Brands:
✔️ Frigidaire✔️ Electrolux✔️ Kenmore (Frigidaire-built)✔️ Gibson✔️ Tappan✔️ Crosley✔️ White-Westinghouse
📌 Need help verifying compatibility? Send us your dryer’s model number — we’ll check it for you.
🚚 Why Buy from Parts-O-Matic?
✅ Reliable aftermarket performance
✅ Always Fast and Free U.S. shipping
✅ Easy DIY repair with trusted support
✅ Backed by excellent customer service
🛒 Fix your dryer’s latching issue today — order the 131658800 dryer door catch from Parts-O-Matic.com, and enjoy fast, free U.S. shipping!
XPARTCO W10195839 Dishwasher Dish Rack Rear Adjuster Guide
Fits Specific Whirlpool, Maytag Dishwasher Models
Replaces Part Numbers: WPW10195839, W10195839, 1872227, AP6016799, PS11750092.
Description: This Rear Adjuster Guide is a replacement part for specific Maytag, Kenmore, Whirlpool dishwasher models, designed to ensure the smooth operation of the adjustable upper rack. This component plays a pivotal role in allowing the rack to move up and down effortlessly, accommodating various sizes of dishes and cookware.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO XPIBE1740 Microwave Light Bulb 40W Replaces 8206232A, WB25X10030
The XPARTCO XPIBE1740 is an aftermarket replacement 40-watt T8 appliance light bulb compatible with a wide range of microwaves, range hoods, refrigerators, ovens, and other kitchen appliances from GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, Hotpoint, and more. It uses the standard E17 intermediate screw base found on most over-the-range and built-in microwave interior lights, range hood lights, and select appliance bulb sockets. With a clear T8 glass envelope, warm white 2800K color temperature, and 280-lumen output, it matches the brightness and look of the original OEM bulbs it replaces.
Specifications: 40W, 125V (AC 110-130V/60Hz), E17 intermediate screw base, T8 shape (1" diameter × 2-3/8" length), 280 lumens, warm white (~2800K), dimmable (compatible with microwave HIGH/LOW light settings), 1000-hour rated life, working temperature High Temp Resistance 300℃. It directly replaces 8206232A, 8206232, 8189961, 8204855, 8205422, 1890433, 0053437, 05200136, 05200137, AP4512653, R0712011, W10321375, W10598935, WB36X10003, WB25X10029, WB25X10030, WB25X10030-24PK, 261201500480, 3015548, 6912W1Z004B, AP5809052, PS2376034, and PS8767095. Installs in under 5 minutes — no tools required for the bulb itself.
Quick Answer
The XPARTCO XPIBE1740 Microwave Light Bulb (40W) replaces burned-out interior microwave lights, range hood lights, and select appliance bulbs across GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, and Hotpoint. T8 shape, 40W, 125V, E17 intermediate screw base. 1" diameter × 2-3/8" length. 280 lumens warm white (~2800K). Dimmable. 1000-hour life. Replaces 8206232A, 8206232, 8189961, 8204855, 8205422, 1890433, AP4512653, R0712011, W10321375, W10598935, WB36X10003, WB25X10029, WB25X10030, WB25X10030-24PK, 6912W1Z004B, AP5809052, PS2376034, PS8767095. Make sure your appliance uses an E17 intermediate base — not E26 standard, E12 candelabra, or E14 European.
Common Problems This Part Fixes
Microwave interior light not working — bulb burned out
Range hood light bulb burned out — under-cabinet area no longer illuminates when cooking
Over-the-range microwave under-cabinet light not working
Bulb flickering or dimming inconsistently — filament starting to fail
Bulb visibly burned out, broken, or rattling when shaken (broken filament)
Microwave light works only intermittently — bulb on the verge of failure
Replacement after long service life — most appliance bulbs last about 2,000 hours
Replaces Part Numbers
This 40W appliance light bulb directly replaces the following OEM and cross-reference part numbers from multiple brands:
8206232A, 8206443, 8183993, 0053437, 05200136, 05200137, 14209237, 14210453, 14210811, 14218311, 14218312, 14218318, 1890433, 2635-0004, 2635-0005, 2665-0003, 4158344, 4158365, 4158432, 4164062, 4166665, 4174608, 4338831, 4359625, 4393681, 53001372, 53422, 53437, 56001071, 56001089, 57001073, 7-47000, 7-47001, 747000, 747001, 8189961, 8204855, 8205422, 8205586, 8206232, R0712013, R0712015, R0713503, R9900310, W10321375, W10598935, Y0053422, Y0053437, Y05200136, Y05200137, Y747000, Y747001, AWP39609, PD00003046, AH2376034, EA2376034, AP4512653, PS2376034, WB25X10030, 261201500480, 3015548, AGE22225 PD00034740, AP5809052, PS8767095, 26QBP4093.
If your bulb part number isn't listed above, check that the base is E17 intermediate and the bulb is 40W — most appliance bulbs in this category are interchangeable. Contact our support team if you need confirmation.
Compatibility
This 40W E17 appliance light bulb is compatible with a wide range of microwaves, range hoods, refrigerators, and ovens using E17 intermediate base sockets, including:
GE over-the-range and countertop microwaves (interior lights)
GE Profile, Café, and Monogram microwaves and range hoods
Whirlpool microwaves and range hoods (over-the-range models)
KitchenAid microwaves (built-in and over-the-range)
Maytag microwaves (select models)
Amana microwaves (select models)
LG over-the-range microwaves
Frigidaire microwaves and range hoods (select models)
Kenmore / Sears microwaves (multi-brand-built models)
Hotpoint microwaves and range hoods
Corningware microwaves (select models)
Also fits select refrigerator interior light sockets, oven lights, and lava lamps using the same E17 base
Important — Check Your Base Type: This bulb uses an E17 intermediate screw base. It will NOT fit appliances designed for E26 (standard household), E12 (candelabra), or E14 (European) bases. The E17 base is the most common base for over-the-range microwaves and range hoods, but check your old bulb or appliance manual to confirm before ordering. Some newer LG microwaves use a 30W bulb instead of 40W — verify your wattage requirement as well.
Key Features
40-watt T8 appliance incandescent bulb — replaces burned-out interior lights in microwaves, range hoods, refrigerators, and select ovens
Standard E17 intermediate screw base — fits the most common appliance bulb socket
T8 shape: 1" (25mm) diameter × 2-3/8" (62mm) length — matches OEM bulb dimensions for clear cover fit
125V (works on AC 110-130V / 60Hz household power)
400 lumens of warm white light (~2800K) — matches the brightness and color of original incandescent OEM bulbs
Dimmable — compatible with microwave HIGH/LOW light settings without flicker
1000-hour rated lifetime — standard for appliance incandescent bulbs
Working temperature range: High Temp Resistance 300℃. — suitable for microwave and range hood heat environments
Replaces 8206232A, 1890433, AP4512653, WB25X10030, WB36X10003, W10321375, W10598935, 6912W1Z004B, and many additional cross-references
Multi-brand cross-compatibility: GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, Hotpoint, Corningware
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY replacement — installs in under 5 minutes
Product Specifications
Part Number
XPIBE1740
Common OEM Replacements
8206232A, WB25X10030, WB36X10003, 6912W1Z004B
Part Type
Appliance Light Bulb (Incandescent)
Condition
Aftermarket Replacement
Application
Microwave, Range Hood, Refrigerator, Oven, Appliance Lights
Wattage
40W
Voltage
125V (operates AC 110-130V / 60Hz)
Base Type
E17 Intermediate Screw Base
Bulb Shape
T8
Dimensions
1" (25mm) D x 2-3/8" (62mm) L
Brightness
280 lumens
Color Temperature
Warm White (~2800K)
Cover
Clear glass
Dimmable
Yes — compatible with HIGH/LOW microwave settings
Lifetime
over 2,000+
Working Temperature
High Temp Resistance 300℃.
Compatible Brands
GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, Hotpoint, Corningware
Installation Notes
⚠️ Let the Bulb Cool Completely Before Touching — Unplug Microwave Before replacing the bulb, unplug the microwave (or disconnect power at the breaker for hardwired range hoods) and allow the old bulb to cool completely — incandescent appliance bulbs run very hot, and the glass can stay hot for several minutes after the light is turned off. For an over-the-range microwave's interior light, the bulb is typically accessed through a small panel or by removing a screw-on cover inside the microwave cavity. For under-cabinet/exterior lights, access the bulb by removing the protective cover or vent grille on the bottom of the microwave or range hood. Unscrew the old bulb counterclockwise and dispose of it safely. Screw in the new XPIBE1740 bulb clockwise — hand-tight only, do not over-tighten. Avoid touching the glass envelope of the new bulb with bare fingers; skin oils on the glass can shorten bulb life. If you must touch the glass, wipe it down with a clean cloth before powering the appliance back on. Replace the cover, restore power, and confirm the light works. Tools needed: none for most models, or a small Phillips screwdriver if a panel/cover must be removed.
Frequently Asked Questions
How do I know if I need an E17, E26, or E12 base bulb?
The "E" number refers to the screw base diameter in millimeters. E17 (intermediate) is 17mm — the most common size for over-the-range microwave interior lights, range hood lights, and many appliance lights. E26 (medium/standard) is 26mm — typical household light bulbs (do NOT fit appliance sockets). E12 (candelabra) is 12mm — used for chandelier and decorative bulbs. E14 (European intermediate) is 14mm — common in Europe but rare in U.S. appliances. The XPIBE1740 is an E17 intermediate base. If your old bulb is noticeably smaller or larger than what you're holding, it's the wrong base — confirm by comparing dimensions or checking your appliance manual before ordering.
Can I use an LED bulb instead of this incandescent one?
In many appliances, yes — LED appliance bulbs with E17 intermediate bases are available and use significantly less power for similar brightness. However, LED bulbs sometimes have compatibility issues with the dimming/HIGH-LOW settings on microwaves, can flicker, or may not work with the appliance's lighting control circuit. The XPIBE1740 incandescent bulb is fully dimmable and a guaranteed direct match to the original appliance bulb's behavior. If you prefer LED for energy savings, confirm the LED is rated for appliance use, has an E17 base, and is dimmable for microwave applications before substituting.
My LG microwave's bulb says 30W — does this 40W bulb fit?
Physically, yes — both the 30W and 40W bulbs use the same E17 intermediate base and similar T8 shape. However, some LG microwave models specifically call for a 30W bulb (such as the 6912W1Z004B variant). Using a 40W bulb in a socket rated for 30W may cause the bulb to run hotter than designed, shortening its life or the surrounding socket components' life. Check your LG microwave's manual or the marking on the old bulb — if it specifies 30W, use a 30W bulb. The XPIBE1740 is 40W, suitable for the majority of microwaves that specify 40W bulbs.
Why do appliance bulbs burn out faster than regular household bulbs?
Appliance bulbs operate in harsher environments than typical household bulbs — high temperatures (microwaves and range hoods can hit 480°F nearby), heavy vibration from cooking appliances, repeated rapid on-off cycling, and frequent thermal shock from cooking steam. Even though they're rated for 1,000 hours of operation, real-world life in an appliance is often shorter than the same incandescent bulb in a household lamp. Buying multi-packs and replacing when one burns out is a common approach. Always allow the appliance to cool before swapping the bulb, and don't touch the new glass with bare fingers to maximize service life.
Is this an OEM or aftermarket part?
This is an aftermarket replacement bulb built to OEM-equivalent quality standards. It is not a branded GE, Whirlpool, or LG OEM bulb, but is manufactured to match the dimensions (T8, 1" × 2-3/8"), electrical specifications (40W, 125V, E17 base), brightness (400 lumens, warm white), and dimmable performance of the original appliance bulbs it replaces. Bulb spec compatibility (not brand) is what determines fit, so a properly specified aftermarket bulb performs identically to the OEM.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 3390719 Dryer Thermal Fuse – Replaces WP3390719 – Compatible with Whirlpool, Maytag & Kenmore Dryers
Product Description
Restore safe dryer operation and proper heating with the XPARTCO 3390719 Dryer Thermal Fuse. This dryer Thermal Fuse is a replacement part for specific Whirlpool, Kenmore dryer models. This disposable, one-time fuse ensures safe operation of your appliance by cutting off power if the temperature exceeds safe limits. A bad thermal fuse can cause your appliance to stop functioning or prevent it from turning on altogether. Symptoms of a bad thermal fuse include no heat or a dryer that won't start. It is located on the blower housing and cannot be reset.
XPARTCO is a trusted aftermarket brand offering appliance replacement parts built to OEM-equivalent specifications at a cost-effective price.
Replaces Part Numbers
WP3390719, 3390719, 15-198, 279650, 3389639, 3389640, 660877, 688841, 690198, 690798, 80004, ET402, G4AP0401, PD00002330, EAP11741444, AP6008309, PS11741444.
Compatibility
This replacement dryer thermal fuse fits select Whirlpool, Maytag, Kenmore, Amana, Estate, Roper, and Crosley dryers.
Commonly installed on the blower housing or exhaust duct, depending on model.
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM safety and temperature ratings
🛡️ Overheat Protection – Shuts off power if unsafe temperatures are detected
🔥 Fixes No-Heat or No-Run Issues – Common solution for blown fuse symptoms
🧩 Direct-Fit Design – Installs easily without modification
💰 Cost-Effective Repair – Reliable alternative to OEM thermal fuses
📐 Product Specification
Part Number: 3390719
Component Type: Dryer Thermal Fuse
Function: One-time over-temperature safety cutoff
Application: Blower housing or exhaust system
Mounting: Screw-mounted
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Unplug the dryer before servicing to avoid electrical shock.
Basic Steps:
Disconnect dryer power.
Remove the rear or front access panel (model dependent).
Locate the thermal fuse on the blower housing or exhaust duct.
Disconnect wires and remove the old fuse.
Install the new XPARTCO 3390719 thermal fuse.
Reconnect wiring, reassemble panels, and restore power.
Test dryer operation.
⏱️ Time Required: 15–20 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore dryer safety and reliable operation — Add to Cart Now for a dependable, budget-friendly repair!
XPARTCO DD61-00222A Dishwasher Middle Dish Rack Roller - Compatible with select Samsung models
Product Description
Restore smooth operation to your dishwasher with the XPARTCO DD66-00022A Dishwasher Lower Dish Rack Roller. This replacement roller is designed as a replacement for select Samsung dishwashers, offering a cost-effective alternative to the original. It supports the lower dish rack, ensuring it glides smoothly in and out for easy loading and unloading. This part addresses issues like the rack sticking, wobbling, or falling off the rails, often caused by worn or broken rollers.
Note: Includes (1) lower dish rack roller. Disconnect power before installation. Verify compatibility with your dishwasher model.
Replaces part numbers: DD66-00023A, PD00002184, EAP4222532, DW0023A, AP4342187, 2002711, PS4222532.
Compatibility:
Compatible with select Samsung dishwasher models, including but not limited to:
Samsung: DW80J3020US/AA-0000, DW80J3020US/AA-0001, DW80J3020US/AA-0002, DW80J3020US/AA-0003, DW80J3020US/AA-0004, DW80J3020US/AA-0005, DW80J3020US/AA-0006, DW80J3020US/AA-0007, DW80J3020US/AA-0008, DW80J3020US/AA-0009, DW80J3020US/AA-0010, DW80J3020US/AA-0011, DW80J3020US/AA-0012, DW80J3020US/AA-0013, DW80J3020US/AA-0014
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung dishwashers.
🔧 Specifications: High-quality plastic roller with metal axle.
💪 Reliable Performance: Ensures smooth gliding of the lower dish rack.
🛠️ Easy Installation: Tool-free; typically installed in 5–10 minutes.
🛡️ Effective Fixes: Resolves sticking, wobbling, or falling rack issues.
Product Specification
Part Number: XPARTCO DD66-00023A
Component Type: Dishwasher lower dish rack roller
Material: Plastic
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dishwasher from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dishwasher running smoothly today!
Add to cart now for a reliable fix!
XPARTCO WE1M654 Dryer Timer Knob – Compatible with GE & Hotpoint Dryers
Product Description
Restore smooth and accurate cycle selection with the XPARTCO WE1M654 Dryer Timer Knob. This high-quality aftermarket replacement fits securely onto the dryer’s timer shaft, allowing easy turning and precise control of drying cycles. A cracked, loose, or missing knob can make it difficult to set cycles or operate the dryer properly. Replacing it with this durable XPARTCO knob restores normal operation and improves everyday usability.
XPARTCO is a trusted aftermarket brand offering appliance replacement parts built to OEM-equivalent specifications at a cost-effective price.
Replaces Part Numbers
WE1M654, 1264290, WE01M0443, WE1M443, WE1M502, WE1M668, AH1482197, EA1482197, PD00001146, EAP1482197, AP3995088, PS1482197.
Compatibility
This replacement dryer timer knob fits select GE and Hotpoint dryers.
Example compatible models include (but are not limited to):
GE GTDP220EF3WW, GTDP300EM1WS
Hotpoint HTDX100EM1WW
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM fit and appearance
🎛️ Smooth Cycle Control – Restores easy and accurate timer adjustment
🧩 Direct-Fit Design – Push-on fit for secure installation
💪 Durable Plastic Construction – Built for everyday use
💰 Cost-Effective Repair – Affordable alternative to OEM knobs
📐 Product Specification
Part Number: WE1M654
Component Type: Dryer Timer Knob
Material: High-strength molded plastic
Color: White (OEM-style)
Mounting: Push-on / shaft-fit
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: None
⚠️ Safety First: Ensure the dryer is powered off before installing the knob.
Basic Steps:
Turn the dryer off.
Align the new XPARTCO WE1M654 knob with the timer shaft.
Press firmly until fully seated.
Rotate to confirm smooth operation.
⏱️ Time Required: Under 2 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore smooth dryer control in seconds — Add to Cart Now for a quick, budget-friendly fix!
WH41X22935 Washer Tub to Pump Hose
Washer Tub to Pump Hose
Replaces Part Number: WH41X22935, WH41X10163, 123C7981, 4258948, J27-763, WH41X0371, WH41X371, AP5983873, PS11721808.
Description: This Washer Tub to Pump Hose is a replacement part for select GE, Hotpoint Top-Load Washer models.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO 675813 Dishwasher Thermal Fuse
The XPARTCO 675813 is an aftermarket replacement bimetal thermal fuse (TCO — thermal cut-off) kit compatible with a wide range of Whirlpool-family dishwashers including Whirlpool, Kenmore, KitchenAid, Maytag, Estate, Crosley, Inglis, Roper, and Admiral. The thermal fuse is a one-time safety device located on or near the control board that monitors internal temperature. If the dishwasher overheats — due to a blocked vent, malfunctioning heating element, or other fault — the fuse permanently interrupts power to protect the dishwasher and prevent fire hazards.
Unlike a resettable thermostat, a blown thermal fuse must be replaced. Once it trips, the dishwasher will show no power and will not start. The kit includes one thermal cutoff fuse with a 2-wire harness (leads extending approximately 18 inches from the fuse), one zip tie, and installation instructions. The fuse body measures 1-1/16" L x 1" W x 7/16" H. The new wiring harness must always be used when replacing the fuse. Installs in 5–15 minutes with basic hand tools.
Quick Answer
The XPARTCO 675813 Dishwasher Thermal Fuse Kit fixes Whirlpool-family dishwashers that show no power, won't start, have a blank control panel, or stopped mid-cycle with no response. The thermal fuse permanently trips when the dishwasher overheats and must be replaced. Kit includes fuse with 2-wire harness, zip tie, and instructions. Fuse body 1-1/16" L x 1" W x 7/16" H. Always install using the new harness included. Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, and more.
Common Problems This Part Fixes
Dishwasher completely dead — no power, no lights, no response when buttons are pressed
Control panel blank with no indicator lights or display
Dishwasher stopped mid-cycle and will not restart
Dishwasher will not start despite the door being closed and latched
No sounds when attempting to start the dishwasher
Dishwasher behaves as if it has no power even though the outlet is live
Replaces Part Numbers
This dishwasher thermal fuse kit directly replaces the following OEM and cross-reference part numbers:
675813, 3375557, 3376359, 675813VP, 679723, AH382828, OEM9345567, AWP39651 PD00002439, EA382828, EAP382828, AP3115186, PS382828.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermal fuse kit is compatible with select dishwashers from the following brands:
Whirlpool dishwashers
Kenmore / Sears dishwashers (Whirlpool-built models)
KitchenAid dishwashers
Maytag dishwashers
Estate dishwashers
Crosley dishwashers
Inglis dishwashers
Roper dishwashers
Admiral dishwashers
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Bimetal thermal cut-off (TCO) fuse — permanently interrupts power if the dishwasher overheats, protecting against fire hazard
One-time safety device — once tripped, the fuse must be replaced (it does not reset)
Rated at 98°C — trips when internal temperature exceeds the safe operating limit
Fuse body dimensions: 1-1/16" L x 1" W x 7/16" H; leads extend approximately 18" from fuse
Kit includes thermal fuse with 2-wire harness, zip tie, and installation instructions
Always install using the new harness included — never reuse the old harness
Metal and plastic construction — reliable performance and heat resistance
Direct replacement for 675813, 675813VP, 3375557, and 3376359 — no modification required
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 5–15 minutes with basic hand tools
Product Specifications
Part Number
675813
Part Type
Dishwasher Thermal Fuse / Thermal Cut-Off (TCO) Kit
Condition
Aftermarket Replacement
Fuse Type
Bimetal thermal cut-off (one-time, non-resettable)
Trip Temperature
98°C (208°F)
Fuse Body Dimensions
1-1/16" L x 1" W x 7/16" H
Lead Length
Approximately 18 inches from fuse body
Color
White / Brown
Material
Metal / Plastic
Kit Includes
Thermal cutoff fuse with 2-wire harness, zip tie, instructions
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Estate, Crosley, Inglis, Roper, Admiral
Installation Notes
⚠️ Unplug or Switch Off Breaker Before Starting Unplug the dishwasher or turn off the circuit breaker before beginning any repair. The thermal fuse is located inside the dishwasher door panel near the control board. Open the dishwasher door and remove all screws from the inner door panel — a Torx bit is typically required on Whirlpool-family models. Carefully lift the inner door panel to expose the control board housing. Remove the black plastic cover over the control board to access the thermal fuse — it is typically on the right side of the board with one wire connected to each terminal. Test the old fuse with a multimeter for continuity (no continuity confirms the fuse has blown). Disconnect the old fuse and its harness. Connect the new 675813 fuse using the new 2-wire harness included in the kit — do not reuse the old harness. Secure the harness with the included zip tie. Reinstall the control board cover, inner door panel, and all screws. Restore power and run a test cycle. Note: If the fuse blows again after replacement, an underlying cause such as a blocked vent, failed heating element, or faulty control board should be diagnosed before replacing the fuse a second time. Tools needed: Torx screwdriver (T15 or T20), Phillips screwdriver, multimeter, work gloves.
Frequently Asked Questions
What does the dishwasher thermal fuse do?
The thermal fuse is a one-time safety device that monitors the internal temperature of the dishwasher. If the temperature rises above the safe operating limit — 98°C in this case — the fuse permanently interrupts the electrical circuit, cutting all power to the dishwasher. This protects both the appliance and your home from fire hazard caused by overheating. Unlike a resettable thermostat, a blown thermal fuse cannot be reset and must be physically replaced.
How do I know if my thermal fuse has blown?
The most obvious sign is a completely dead dishwasher — no lights, no sounds, and no response when you press any buttons, even though the outlet has power. You can confirm a blown fuse with a multimeter: disconnect the fuse from the harness and test for continuity across its two terminals. A working fuse will show continuity (near-zero resistance); a blown fuse will show no continuity (open circuit). If the fuse tests bad, replace it with the 675813 kit.
Why did my thermal fuse blow, and will it happen again?
Thermal fuses blow when the dishwasher overheats. Common causes include a blocked air vent, a malfunctioning or shorted heating element, a failed thermostat, or an electrical fault in the control board. If you simply replace the fuse without addressing the root cause, it may blow again. After replacing the fuse, run the dishwasher and monitor for any unusual heat, steam, or burning smell. If the fuse blows again, have the underlying fault diagnosed before ordering another replacement.
Why must I use the new harness and not the old one?
When a thermal fuse blows, the wiring harness connected to it may have been exposed to the same overheating event that tripped the fuse. The wires or connectors may have degraded or partially melted even if they appear intact. Using the old harness risks a poor connection or a recurring fault. Always install the new 2-wire harness included in the kit to ensure a reliable, safe connection.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from metal and plastic to match the dimensions, trip temperature, and performance of the original 675813 thermal fuse.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
