XPARTCO 137032600 Dryer Thermal Fuse – Compatible with Frigidaire, Electrolux, and Kenmore Dryers
Product Description
Protect your dryer from overheating with the XPARTCO 137032600 Dryer Thermal Fuse. This high-quality aftermarket replacement acts as a safety device that shuts off power to the heating element if the dryer overheats. A blown fuse can cause the dryer to stop heating or fail to start. Replacing it with this reliable and affordable XPARTCO fuse ensures safe operation and restores your dryer’s performance.
Replaces Part Numbers
137032600, 137060800, 1483164, 7137032600, AH2349395, EA2349395, PD00000890, EAP2349395, AP4368739, PS2349395.
Compatibility
This replacement thermal fuse fits select Frigidaire, Electrolux, and Kenmore dryers.
Example compatible models include (but are not limited to): Frigidaire AEQ6000ES0, Electrolux EIED55HIW0, and Kenmore 417.88042700.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM performance for Frigidaire and Electrolux dryers
🔥 Safety Protection – Prevents overheating by cutting off power to the heating element
💰 Cost-Effective Fix – Affordable alternative to expensive OEM replacements
🛠️ Easy Installation – Direct-fit design for simple DIY replacement
🛡️ Fixes Common Issues – Restores heat function and resolves dryer not starting or heating problems
📐 Product Specification
Part Number: 137032600
Component Type: Dryer Thermal Fuse
Material: Heat-resistant plastic and metal housing
Mounting: Direct-fit installation on heater housing
Operating Conditions: Designed for residential electric dryers
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before performing any repairs to prevent electrical shock.
Steps:
Disconnect power and move dryer away from the wall.
Remove the rear access panel to locate the thermal fuse.
Disconnect wires and remove screws securing the old fuse.
Install the new XPARTCO 137032600 fuse and reconnect wires.
Reattach the back panel, restore power, and test heating function.
⏱️ Time Required: 10–15 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🧰 Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Protect your dryer and restore performance — Add to Cart Now for a reliable, budget-friendly replacement!
WG447 Microwave Mica Sheet, Waveguide Cover – Compatible with Whirlpool, GE, Samsung, LG, Panasonic, and More
Product Description
Protect your microwave’s internal components with the WG447 Microwave Mica Sheet / Waveguide Cover. Microwave mica chips can effectively prevent water or oil and other substances from splashing on the magnetron or other components during the heating process of food. Protect the microwave oven from burning.
Size can be cut: The waveguide cover size is 10 cm*10.8 cm (3.93 in x 4.65 in), you could cut it into any size to fit your microwave oven. Easy to cut.
Widely used: As a kind of heat resisting and insulating product. Mica Plates is widely used in household appliances such as hair dryers, toasters, microwave ovens, warmers, etc.
Replaces Part Numbers
universal microwave mica sheet equivalents.
Size can be cut: The waveguide cover size is 10 cm*10.8 cm (3.93 in x 4.65 in), you could cut it into any size to fit your microwave oven. Easy to cut.
Compatibility
This replacement waveguide cover fits a wide range of Whirlpool, GE, Samsung, LG, Panasonic, Emerson, Sharp, Kenmore, and other microwaves that use a cut-to-fit mica sheet.
Common compatible models include (but are not limited to):Whirlpool WMH31017HS, GE JVM3160RFSS, Samsung ME18H704SFS, LG LMV1762ST, Panasonic NN-SN766S.
Always compare dimensions before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Universal cut-to-fit design matches OEM insulation and heat resistance
⚡ Restores Safe Operation – Prevents arcing, sparking, and microwave energy leakage
🔥 Heat & Moisture Resistant – Made from high-grade mica composite
✂️ Easy to Trim – Can be cut to match original waveguide cover size
🛡️ Fixes Common Issues – Solves sparking, burning smell, and uneven heating caused by damaged covers
📐 Product Specification
Part Number: WG447
Component Type: Microwave Mica Sheet / Waveguide Cover
Material: Heat-resistant mica composite
Dimensions: Approx. 6" × 6" (can be trimmed to size)
Thickness: Standard 0.3–0.4 mm mica sheet
Mounting: Press-fit or screw-secured depending on model
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Scissors or utility knife (for trimming), screwdriver (if applicable)
⚠️ Safety First: Always unplug the microwave before servicing. Do not operate the microwave without a waveguide cover.
Steps:
Disconnect power and remove the old burned or damaged mica cover.
Use the old cover as a template to trim the new WG447 mica sheet.
Align the new cover over the waveguide opening.
Press into clips or secure with screws depending on your model.
Restore power and test heating performance.
⏱️ Time Required: 5–10 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Stop microwave sparking and restore safe heating — Add to Cart Now for a quick, reliable fix!
ERP W10909685 Dryer Thermal Fuse
Dryer thermal fuse located on the blower housing. If the dryer overheats, the thermal fuse blows cutting off power to the motor or the heating system. When the fuse is bad the dryer won't start or will run but not heat. The thermal fuse cannot be reset. Fuses often blow due to a clogged dryer vent.
Replaces part Numbers: W10909685, W10693363, G4AP0506, F 091C ACA2, PD00036363, EAP11766766, AP6034383, PS11766766.
This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO DC96-00887C Dryer Thermal Cut Off Fuse
The XPARTCO DC96-00887C is an aftermarket replacement thermal cut-off fuse for Samsung and select Kenmore electric dryers, mounted with its bracket on the blower housing. This fuse is a one-time safety device: as long as temperatures around the blower stay within normal range, it does nothing at all, but the instant they climb high enough — almost always from restricted airflow — the fuse permanently opens the circuit and cuts power to protect the dryer. That's why a blown fuse at this location produces such a specific symptom: the dryer won't start at all, with no lights, no tumble, and no response, even though the outlet has power.
Despite frequently being labeled a "thermostat" on third-party marketplaces, this is genuinely a fuse, not a thermostat — once it opens from excess heat, it stays open permanently and cannot reset itself. It ships complete with its mounting bracket for a direct plug-in fit. A blown thermal fuse is almost always a symptom rather than a random failure: restricted exhaust venting is the leading cause, since trapped heat is exactly what this fuse is designed to react to. It directly replaces DC96-00887A, AP5966894, 2074129, AP4207819, PS4216838, EAP4216838, WP35001193, 35001193, PS11741822, PS11741829, and AP6008689.
Quick Answer
The XPARTCO DC96-00887C Dryer Thermal Cut Off Fuse fixes Samsung and select Kenmore electric dryers that won't start at all — no lights, no tumble, no response to any button. Mounted with bracket on the blower housing. Replaces DC96-00887A, AP5966894, 2074129, AP4207819, PS4216838, EAP4216838, WP35001193, 35001193, PS11741822, PS11741829, AP6008689. This is a different fuse from our DC47-00016A listing, which mounts on the heater can rather than the blower housing — always verify which fuse your dryer's parts diagram calls for.
Common Problems This Part Fixes
Dryer won't start at all — no lights, no tumble, no response to any button
Dryer that stopped working suddenly, especially after running unusually hot
Dryer runs a short time then shuts off completely and won't restart
Repeated blown fuses on a dryer with a known venting or airflow restriction
Clothes coming out extremely hot right before the dryer stopped working
Continuity test shows an open circuit across the old fuse
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer thermal cut-off fuse directly replaces the following OEM and cross-reference part numbers:
DC96-00887C, DC96-00887A, PD00035400, EAP4216838, AP5966894, ASM65115, PD00035400, PS4276292, WP35001193, 35001193, PD00003365, EAP11741829, AP6008689, AWP47381, PD00003365, PS11741829.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermal cut-off fuse is compatible with select Samsung electric dryers, and also fits select Kenmore dryers built on the Samsung platform, including model numbers such as:
DV5471AEW/XAA
DV40J3000EW/A2, DV42H5000EW/A3, DV45H7000EW/A2, DV48H7400EW/A2
DV400EWHDWR/AA
DVE50M7450W/A3
Note — not the same as DC47-00016A: This fuse mounts on the blower housing. Our DC47-00016A listing is a separate thermal fuse that mounts on the heater can instead — the two guard different points in the same circuit and are not interchangeable. Always verify your full model number and check your parts diagram for the exact mounting location before ordering. Contact our support team with your model number if you're unsure which fuse your dryer needs.
Key Features
Aftermarket replacement thermal cut-off fuse — one-time safety device that cuts power if the dryer overheats
Mounted with its bracket on the blower housing for a direct plug-in fit
Resolves "won't start at all," "stopped working suddenly," and "clothes came out extremely hot before it died" symptoms caused by a blown fuse
Genuinely a fuse, not a thermostat, despite common marketplace mislabeling — non-resettable once blown
Replaces DC96-00887A, AP5966894, 2074129, AP4207819, PS4216838, EAP4216838, WP35001193, 35001193, PS11741822, PS11741829, and AP6008689
Compatible with Samsung and select Kenmore electric dryers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
DC96-00887C
OEM Part Number
DC96-00887C
Part Type
Dryer Thermal Cut-Off Fuse (with Bracket)
Condition
Aftermarket Replacement
Location
Blower housing
Resettable
No — one-time use, must be replaced once blown
Related Component
DC47-00018A high-limit thermostat (different device, same circuit, sold separately)
Quantity
1 thermal fuse with bracket
Compatible Brands
Samsung, select Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — Inspect And Clean The Venting Before Reassembling Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel: remove the screws securing the panel to reach the blower housing where the fuse is mounted. Photograph the wiring before disconnecting the old fuse's connectors. Remove the mounting screw holding the fuse and bracket in place, and pull it free, disconnecting both wire terminals. Before installing the new fuse, test it for continuity with a multimeter to confirm it's good out of the box, and test the old one to confirm it's actually blown (no continuity) rather than assuming. This is the most important step: fully inspect and clean the dryer's exhaust vent, from the lint trap housing all the way to the exterior vent hood, checking for lint buildup, crushed sections, or excessive length. A blown thermal fuse is a symptom of restricted airflow, and skipping this step means the new fuse is likely to blow again. Install the new DC96-00887C in the same mounting position, reconnect both wire terminals, and secure the mounting screw. Reinstall the rear panel, restore power, and run a test cycle to confirm normal heating and shutoff behavior. Tools needed: Phillips or nut driver (model-dependent), multimeter, vent brush or vacuum attachment for cleaning ductwork, work gloves.
Frequently Asked Questions
Some listings call this a "thermostat." Is it really a fuse?
Yes, genuinely a fuse. This is a common point of confusion across the marketplace — many third-party sellers label DC96-00887C a "thermostat," but it functions as a one-time thermal cut-off fuse. Once it opens from excess heat, it stays open permanently and cannot reset itself, unlike a true thermostat, which closes again automatically once temperatures drop. If your fuse has blown, replacement is the only option regardless of what a given listing calls it.
I replaced the fuse and it blew again. What's going on?
This is a strong sign that the underlying cause — almost always restricted airflow — was never addressed. Thermal fuses don't fail from age; they blow because the dryer overheated. If a new fuse keeps blowing, thoroughly inspect and clean the entire exhaust path from the lint trap housing to the outside vent hood, checking for lint buildup, crushed or kinked ductwork, or a vent run that's too long. If airflow checks out and the fuse still blows, have the high-limit thermostat and thermistor checked as well, since a struggling thermostat can push this fuse to blow as the last line of defense.
How is this different from your DC47-00016A listing?
Both are one-time thermal fuses in the same dryer, but they mount in different locations and protect different points in the heating circuit. This DC96-00887C fuse is mounted on the blower housing; the DC47-00016A fuse is mounted on the heater can. They are not interchangeable, so check your parts diagram or the physical mounting location on your dryer to confirm which one you need.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications, bracket configuration, and mounting position of the original DC96-00887C thermal fuse used in compatible Samsung and Kenmore electric dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
EXP499 Microwave Door Switch (Normally Closed)
Restore reliable door safety and control with the EXP499 aftermarket door switch, designed for normally closed (NC) operation. Rated for 16 A at 125/250 VAC, it meets OEM performance standards and is compatible with many major appliance brands.
🔁 Replaces OEM Part Numbers:
WB24X830, AH237422, EA237422, WB24X0800, WB24X0830, WB24X10075, WB24X800, AP2024338, PS237422, WB24X25397, WB24X817, WB24X10112, WB24X0817, AP6037282, PS11766871, 00606695, 1386420, 606695, AH3477007, EA3477007, AP4067354, PS3477007, PS8726632, 5304408937, 5304509459, 5304464098, 4583655, AP6230614, PS12071302, ANE61784L0AG, AP7040623, WB24X10205, WB24X10147, 251201600930, 3025959, AP5790849, PS8754455, W10269458, W10211973, 1550016, 4393598, 8206347, AH2361111, EA2361111, AP4429884, PS2361111, 6600W1K001C, AP4650823, PS3529293, WB24X824, 253814, WB24X0824, AH237416, EA237416, AP2024332, PS237416, 5304456101, 1198245, 75304456101, AH1532505, EA1532505, AP3960662, PS1532505, 6600W1K001R, 1583495, AH3598700, EA3598700, AP5254801, PS3598700, 3405-001033, DE34-20019A, WP3405-001033, 2028596, 3405-000176, AP4044665, PS4131191, WB24X804 253795, WB24X0422, WB24X0804, WB24X422, AH237397, EA237397, AP2024313, PS237397, WB24X10189, 1810588, AH3486597, EA3486597, AP4980349, PS3486597, 3B73361E, 1325767, 3B73361D, 6600W1K003C, 6600W1K004B, AH3522736, EA3522736, AP4629337, PS3522736, 4415A66600, 1206671, 4415A66610, GSM-V1602A2, AP5322919.
✅ Key Features
Normally Closed (NC) micro-switch
16 A rating at both 125 VAC and 250 VAC
Durable design for reliable, long-lasting performance
🔧 Fixes These Common Issues:
Microwave won’t start or stops mid-cycle
No heat even though power is on
Door latch doesn't trigger the switch
🧰 Compatibility:
Works with Whirlpool, GE, Kenmore, Samsung, LG, and many other microwaves — check your old switch’s part numbers above to confirm fit.
🚚 Why Shop at Parts-O-Matic?
Trusted XPARTCO quality Parts
Shipped Fast and Free anywhere in the U.S.
Easy DIY replacement suitable for homeowners and pros
Reliable support — contact us with your model number if you're unsure
🛒 Restore your microwave’s safety and function — order the EXP499 NC Door Switch today and get it shipped fast and free.
XPARTCO 8318314 Dryer Thermal Cutoff Fuse (352°F)
The XPARTCO 8318314 is an aftermarket replacement 352°F thermal cutoff fuse compatible with a wide range of Whirlpool, Maytag, KitchenAid, Kenmore, Amana, Crosley, Roper, Inglis, and Estate dryers. The thermal cutoff fuse is a critical safety device mounted near the heating element housing — it acts as a backup safety in case the high-limit thermostat fails to open. When the air temperature inside the heating element area reaches 352°F, the fuse permanently opens and cuts power to the heater circuit, preventing the dryer from continuing to overheat and creating a fire risk.
This is a one-time fuse — once it has tripped, it cannot be reset and must be replaced. White and gray metal/ceramic construction. Dimensions: 1-1/4"L x 1-1/4"W x 2-3/16"H, with approximately 1-5/8" between mounting holes (center to center). It directly replaces 8318314. Important: when the thermal cutoff blows, the high-limit thermostat (8557403 — sold separately) is often also stressed and should be tested or replaced at the same time. Installs in 15–20 minutes with basic hand tools.
Quick Answer
The XPARTCO 8318314 Dryer Thermal Cutoff Fuse (352°F) fixes Whirlpool, Maytag, KitchenAid, Kenmore, Amana, Crosley, Roper, Inglis, and Estate dryers that suddenly stopped heating after an overheat event. One-time fuse — 352°F open, must be replaced once blown. 1-1/4"L x 1-1/4"W x 2-3/16"H, ~1-5/8" between mounting holes. Metal/ceramic. Often replaced alongside the high-limit thermostat (8557403, sold separately).
Common Problems This Part Fixes
Dryer suddenly stopped heating with no warning — thermal cutoff has blown after an overheat event
Dryer runs and tumbles normally but produces no heat
No-heat fault following a partially blocked exhaust vent or restricted airflow event
Multimeter continuity test shows the cutoff has an open circuit (no continuity)
Visible damage or discoloration around the thermal cutoff housing from a prior overheat event
Repeated no-heat problems where the thermal cutoff has tripped more than once
Replaces Part Numbers
This thermal cutoff fuse directly replaces the following OEM and cross-reference part numbers:
8318314
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This 352°F thermal cutoff fuse is compatible with select dryers from the following brands:
Whirlpool dryers (Elite, Cabrio, Duet, and WED series — select models including WED9200, WED7300, WED7400, WED7600 and related)
Maytag dryers (Maxima and MED series — select models including MED3500, MED6000XW, MEDE900VW and related)
KitchenAid dryers (select models)
Kenmore / Sears dryers — Elite 110-series and related Whirlpool-built models
Amana dryers — NED and YNED series (select models including NED7500VW1 and related)
Crosley dryers (CED series and related models)
Roper dryers (select models)
Inglis dryers (select models)
Estate dryers (select models)
Important — Check Vent Before Restarting: A blown thermal cutoff is almost always the result of restricted dryer airflow. Before replacing this fuse and restoring service, thoroughly clean the dryer's exhaust vent line all the way to the exterior wall outlet, the lint screen, and any internal lint buildup. Installing a new thermal cutoff without fixing the underlying airflow problem will cause the new fuse to blow within a short time, repeating the failure.
Key Features
352°F one-time safety fuse — permanently opens to cut power to the heater circuit if the dryer overheats
Backup safety device — protects against overheating in case the high-limit thermostat fails to open
Cannot be reset — must be replaced once blown
Dimensions: 1-1/4"L x 1-1/4"W x 2-3/16"H; approximately 1-5/8" between mounting holes (center to center)
Metal and ceramic construction in white/gray
Often replaced together with the high-limit thermostat (8557403, sold separately) as a paired safety repair
Compatible with Whirlpool, Maytag, KitchenAid, Kenmore, Amana, Crosley, Roper, Inglis, and Estate dryers
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–20 minutes with basic hand tools
Product Specifications
Part Number
8318314
Part Type
Dryer Thermal Cutoff Fuse (Safety Fuse)
Condition
Aftermarket Replacement
Application
Electric and Gas Dryers (Whirlpool platform)
Trip Temperature
352°F
Fuse Type
One-Time (must be replaced once blown — cannot be reset)
Dimensions
1-1/4"L x 1-1/4"W x 2-3/16"H
Mounting Hole Spacing
Approx. 1-5/8" center to center
Color
White / Gray
Material
Metal / Ceramic
Often Replaced With
High-Limit Thermostat (8557403, sold separately)
Compatible Brands
Whirlpool, Maytag, KitchenAid, Kenmore, Amana, Crosley, Roper, Inglis, Estate
Installation Notes
⚠️ Unplug Dryer Before Starting — Clean Vent System First Disconnect power before beginning. Wear work gloves to protect your hands. Before installing the new thermal cutoff, thoroughly clean the dryer's vent line — from the lint screen through the duct to the exterior wall outlet, plus any internal lint buildup around the heater housing. A blown thermal cutoff is virtually always caused by restricted airflow; if you don't fix the underlying cause, the new fuse will trip again soon. Access the thermal cutoff by removing the rear (or front, depending on model) access panel of the dryer to expose the heating element housing. The 8318314 thermal cutoff is mounted on or near the heater housing. Photograph the wire connections before disconnecting. Disconnect the wires from the old cutoff and remove the mounting screw(s). Install the new 8318314 cutoff in the same position and reconnect the wires. While the panel is open, this is also the ideal time to test or replace the high-limit thermostat (8557403) — overheat events that blow this fuse often damage that component too. Reassemble the panel, restore power, and run a test heat cycle to confirm normal heat operation. Tools needed: Phillips screwdriver, 1/4" nut driver, multimeter, work gloves.
Frequently Asked Questions
What's the difference between a thermal cutoff, a thermal fuse, and a high-limit thermostat?
All three are safety components in a dryer's heating circuit but they serve different roles. The high-limit thermostat (such as 8557403 or 3391914) is a resettable safety switch — it opens when the air gets too hot, then closes again automatically once it cools. The thermal cutoff (8318314, 352°F) is a one-time fuse on the heating element circuit — it blows permanently if the temperature exceeds 352°F, meaning the high-limit thermostat failed to do its job. The thermal fuse (often 3392519) is a separate one-time fuse mounted on the exhaust duct — it blows if exhaust airflow temperature exceeds its rating. Each protects against a different failure mode and is replaced individually when it blows.
Why did my thermal cutoff blow in the first place?
A blown thermal cutoff is almost always the result of restricted airflow through the dryer. The most common causes are: a clogged or kinked exhaust vent line, a clogged lint screen, lint buildup inside the dryer cabinet near the heater housing, or a failed blower wheel/motor that's not moving enough air. Less commonly, a failed high-limit thermostat (stuck closed) can let the dryer overheat until the thermal cutoff blows as a last-resort safety. Before replacing this part, identify and fix the underlying airflow issue — otherwise the new fuse will blow within a short time.
Should I replace the high-limit thermostat at the same time?
Yes, it's highly recommended. The thermal cutoff is the second line of defense against overheating — for it to trip, the high-limit thermostat ahead of it likely failed to open at its normal cycling temperature, was stressed by the overheat event, or was already weakened. Replacing the high-limit thermostat (8557403 on many compatible Whirlpool-platform dryers) at the same time is standard practice and ensures both safety components work correctly together. The 279973 kit even bundles a thermal cutoff with a high-limit thermostat for this reason.
Can the thermal cutoff be reset like a circuit breaker?
No — the 8318314 is a one-time thermal fuse. Once it opens at 352°F, it permanently breaks the electrical circuit and cannot be reset. Some appliance components (like a high-limit thermostat) can reset automatically as they cool, but a thermal cutoff fuse is a single-use safety device by design. If your dryer suddenly stopped heating and a continuity test on this fuse shows an open circuit, it must be replaced.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from metal and ceramic with the same 352°F trip temperature, dimensions (1-1/4"L x 1-1/4"W x 2-3/16"H), and mounting hole spacing (1-5/8" center to center) as the original 8318314 thermal cutoff fuse.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
(6 Pack) XPG499 Microwave Door Switch (Normally Closed)
Restore reliable door safety and control with the XPG499 replacement door switch, designed for normally closed (NC) operation. Rated for 16 A at 125/250 VAC, it meets OEM performance standards and is compatible with many major appliance brands.
🔁 Replaces OEM Part Numbers:
WB24X830, AH237422, EA237422, WB24X0800, WB24X0830, WB24X10075, WB24X800, AP2024338, PS237422, WB24X25397, WB24X817, WB24X10112, WB24X0817, AP6037282, PS11766871, 00606695, 1386420, 606695, AH3477007, EA3477007, AP4067354, PS3477007, PS8726632, 5304408937, 5304509459, 5304464098, 4583655, AP6230614, PS12071302, ANE61784L0AG, AP7040623, WB24X10205, WB24X10147, 251201600930, 3025959, AP5790849, PS8754455, W10269458, W10211973, 1550016, 4393598, 8206347, AH2361111, EA2361111, AP4429884, PS2361111, 6600W1K001C, AP4650823, PS3529293, WB24X824, 253814, WB24X0824, AH237416, EA237416, AP2024332, PS237416, 5304456101, 1198245, 75304456101, AH1532505, EA1532505, AP3960662, PS1532505, 6600W1K001R, 1583495, AH3598700, EA3598700, AP5254801, PS3598700, 3405-001033, DE34-20019A, WP3405-001033, 2028596, 3405-000176, AP4044665, PS4131191, WB24X804 253795, WB24X0422, WB24X0804, WB24X422, AH237397, EA237397, AP2024313, PS237397, WB24X10189, 1810588, AH3486597, EA3486597, AP4980349, PS3486597, 3B73361E, 1325767, 3B73361D, 6600W1K003C, 6600W1K004B, AH3522736, EA3522736, AP4629337, PS3522736.
✅ Key Features
Normally Closed (NC) micro-switch
16 A rating at both 125 VAC and 250 VAC
Durable design for reliable, long-lasting performance
🔧 Fixes These Common Issues:
Microwave won’t start or stops mid-cycle
No heat even though power is on
Door latch doesn't trigger the switch
🧰 Compatibility:
Works with Whirlpool, GE, Kenmore, Samsung, LG, and many other microwaves — check your old switch’s part numbers above to confirm fit.
🚚 Why Shop at Parts-O-Matic?
Trusted XPARTCO quality Parts
Shipped Fast and Free anywhere in the U.S.
Easy DIY replacement suitable for homeowners and pros
Reliable support — contact us with your model number if you're unsure
🛒 Restore your microwave’s safety and function — order the XPG499 NC Door Switch today and get it shipped fast and free.
XPARTCO 3387134 - 3392519 Dryer Cycling Thermostat and Thermal Fuse Set - Compatible with Whirlpool, Kenmore, Maytag
Product Description
Maintain safe and efficient dryer operation with the XPARTCO 3387134 - 3392519 Dryer Cycling Thermostat and Thermal Fuse Set. This replacement kit includes one cycling thermostat (3387134, L155-25) and one thermal fuse (3392519), designed as a replacement for select Whirlpool, Kenmore, Maytag, and other compatible dryers. The cycling thermostat regulates drum temperature, while the thermal fuse prevents overheating by cutting power if temperatures exceed safe limits. This set addresses issues like overheating, insufficient heat, no heat, or prolonged drying times. Test the thermal fuse first if the dryer won't heat, as it typically fails before the thermostat.
Note: Includes (1) cycling thermostat and (1) thermal fuse. Disconnect power before installation. Verify compatibility with your dryer model.
Replaces part numbers:
Cycling Thermostat: WP3387134, 3387134, 3387135, 3387139, 3-6910, 306910, 326801, 661512, L150-15F, L155-25F, AP6008270, PS11741405.
Thermal Fuse: 3392519, WP3392519, 3388651, WE4X857, G4AP0500, 6L4101091C, ET401, 3388651, 694511, 80005, PS11741460, AP6008325.
Compatibility:
Compatible with select dryer models, including but not limited to:
Whirlpool: LE5700XKW0, LE5920XKW0, WED4815EW1, WED4910XQ1, WED5300SQ0
Kenmore: 110.97591420, 110.97591220, 110.97592420, 110.60072990
Maytag: MDE5500AYW, MDE6000AYW, MDE7600AYW
Roper: RED4440VQ1, REX5634KQ1
Amana: NED4655EW0
KitchenAid: KEYE760WWH0
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, Roper, Amana, KitchenAid, and other dryers.
🔧 Specifications: Replacement kit with one cycling thermostat (L155-25 SPST, 120V, 2W) and one thermal fuse (250°F limit, non-resettable).
💪 Reliable Performance: Regulates drum temperature and prevents overheating for safe, efficient drying.
🛠️ Easy Installation: Requires a screwdriver and pliers; typically installed in 15–30 minutes.
🛡️ Effective Fixes: Resolves overheating, insufficient heat, no heat, or prolonged drying times.
Product Specification
Part Number: XPARTCO 3387134 - 3392519
Component Type: Dryer cycling thermostat and thermal fuse kit
Material: Plastic and metal
Electrical Specs:
Cycling Thermostat: 120V, 2W; L155-25 SPST, opens at 155°F, closes at 130°F
Thermal Fuse: 250°F limit, 125/250V, non-resettable
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running safely and efficiently today!
Add to cart now for a reliable fix!
MWC21105 Microwave Capacitor 2100 VAC, 1.05 µF – Universal Microwave Replacement
Product Description
Restore proper microwave heating performance with the MWC21105 Microwave High Voltage Capacitor (2100 VAC, 1.05 µF). This high-quality aftermarket capacitor stores and releases electrical energy required by the high-voltage circuit to power the magnetron. A failed capacitor can cause the microwave to stop heating, trip breakers, or produce humming noises. Replacing it with this reliable XPMWC21105 capacitor helps restore efficient heating and safe microwave operation.
Replaces Part Numbers
WB27X11033, PD00030313, WB27X10308, WB27X10520, WB27X10701, WB27X10747, WB27X10805, 1474118, EAP2353613, AP4412060, PS2353613, W10850446, PD00032266, 4383732 EAP11731152, AP5999188, PS11731152, WB27X29988, PD00064298, 4586376, EAP12296267, AP6286260, PS12296267, 0CZZW1H004C, PD00032660, 1271742, EAP3517242, AP5199046, PS3517242, W10705215, W11335495, AP5956548, PS10063950, W11213318, PD00061266, EAP12349322, 4844491, AP6329441, PS12349322, WP8184813, PD00028888, EAP731741, 4437142, AP6011903, PS731741, WP4375020, PD00039292, EAP11742447, 4434444 AP6009291, PS11742447, 56002017, 56001435, AP4396772, 0CZZW1H004S, PD00008613, EAP3538829, 1271749 AP5199046, PS3538829, 0CZZW1H004K, 0CZZW1H001L, 1271745, EAP3517244, AP5199046, PS3517244.
Compatibility
Cross Reference Information: 3011660 Electrolux, WB27X321 General Electric 0CZZW1H004C 80832500 Kenmore 66312500 Kenmore 2501-001014 Samsung 80802400 Kenmore 115T157P01 Electrolux LRM1260SW Goldstar W10138798 Whirlpool 4375020 GMC305PDT6 Whirlpool 0CZZW1H005B 66292500 Kenmore 88503800 Kenmore 8183856 KCMS2055SSS0 Whirlpool 5308037624 Electrolux 0CZZW1H004C 66469500 Kenmore 0CZZW1H004C 80833500 Kenmore 0CZZW1H003J 88502800 Kenmore 66462500 Kenmore 8185272 MT4155SPQ0 Whirlpool K60905M40AP NNS732BL Panasonic 8171898 Whirlpool 8184813 Whirlpool 4375436 GSC308PJQ05 Whirlpool 0CZZW1H002J Goldstar 66463500 Kenmore WB27X10308 JVM1640CH001 General Electric NNS723WL Panasonic 63252301 Kenmore 4375436 GSC308PJB05 Whirlpool 0CZZW1H005A LG K60907230AP NNS723BL Panasonic 63259301 Kenmore WB27X10520 General Electric WB27X10747 General Electric 63259300 Kenmore 8183525 KCMS185JBT0 Whirlpool NNS732WL Panasonic WB27X375 General Electric 0CZZW1H004P Goldstar WB27X10805 JVM1653BH06 General Electric 63252300 Kenmore 0CZZW1H004C 80809400 Kenmore WB27X10308 General Electric 0CZZW1H004C 80513600 Kenmore 5304423485 Electrolux 421344 HMB405 Bosch WB27X306 General Electric WB27X10743 JES1290SK01 General Electric 66339800 Kenmore WB27X375 General Electric 0CZZW1H004C 80834500 Kenmore 66319500 Kenmore LMV2053ST LG LMV2073BB LG 86003010 Kenmore LMV2073WW LG 86009010 Kenmore LMV2053SB LG 63299300 Kenmore LMV2053SW LG 80803400 Kenmore 80802401 Kenmore LRM2060ST LG 53001344 MMV5207AAB Whirlpool 80509800 Kenmore 86002010 Kenmore 80803401 Kenmore W10343300 GMH6185XVQ1 Whirlpool 63999300 Kenmore 62349202 Kenmore LSRM205ST LG 80804401 Kenmore 63993300 Kenmore 63993301 Kenmore LMVM2055SW LG LMV2073ST LG 80804400 Kenmore LMVM2055ST LG 62344301 Kenmore LMVM2055SB LG 0CZZW1H004P LG LCRM1240ST LG 0CZZW1H004P 62342200 Kenmore 62342202 Kenmore 62349200 Kenmore 60483000 Kenmore 63999301 Kenmore LCRM1240SW LG 62349203 Kenmore 0CZZW1H004C LRM2060ST LG 62344300 Kenmore LCRM1240SB LG OM13P4NWHB Gibson G.9-18F 22C*-6CKLXM7- Magic Chef CMW1103.AX Crosley M22A-2.1 Magic Chef BMR25A7.AX Admiral DM16H*-10PB Nrg MCT1375LI Electrolux CMW22A6.1 Crosley OM13P4NWHA Gibson M87B Magic Chef CMW1504.1 Crosley MF30B-5P.AX Magic Chef M16F-10.P.1 Magic Chef MW M30A-5P Magic Chef G.1-28 F22C*-6CKLXM7- Magic Chef CMW22A2.1 Crosley M16F-10.PB.1 Magic Chef M20A.-2.1 Magic Chef OM13P7NWHA Gibson NMW277B.AX Magic Chef OM13P7NWHB Gibson BCMW1507.AX Crosley MW317Z.3 Magic Chef BCMW1517.AX Crosley M22B-3.1 Magic Chef BMR27A8.AX Admiral MWF307-5P Magic Chef MF30A-5P.AX Magic Chef EB91-5CLXM5P.A Magic Chef BMR27B7.AX Admiral M22A-4.1 Magic Chef EB91-5CLXM5P.B Magic Chef BMR27C7.AX Admiral 1.05UF 2100V GE MA2117W Goldstar 1.05UF 2100V GE MA2117W Goldstar BMR27D7.1 Admiral G21A-5M7PF22C*-2CKLXM7- Magic Chef DM16H*-10B Nrg G9-28 F22C*-6CKLXM7- Magic Chef CMW12B7.4 Crosley M61A-7P.AX Magic Chef M61B-7P.AX Magic Chef M61B-8P.AX Magic Chef B25-5CLSM7P*88 Magic Chef VM30A-5P.1 Magic Chef F22D*-2KLXM7- Magic Chef M61C-5P.AX Magic Chef B25-5CLSM7P-27 Magic Chef B25-2CLSM7P Magic Chef M61B-5P.AX Magic Chef M61A-8P.AX Magic Chef M16C-10B.1 Magic Chef M60C7P.AX Magic Chef B25-2CLSM7P-80 Magic Chef 0CZZW1H004C 80839500 Kenmore M60B7-P.AX Magic Chef B25-5CLSM7P Magic Chef M16C-10PB.2 Magic Chef M60A-7P.AX Magic Chef M16E-10PB.1 Magic Chef M61C-7P.AX Magic Chef MR25A4.AX Admiral MR22D3.1.3 Admiral BMR27D7.AX Admiral G.1 Magic Chef CMW12B3.5 Crosley CM40A-6P.1 Magic Chef CM40A-6P.4 Magic Chef M16F-10.B1 Magic Chef CMW12B1.AX Crosley CMW12B3.1-3 Crosley M16F-10.1 Magic Chef MR22D7.4 Admiral MR22D7.1-3 Admiral MR22D3.4 Admiral G.01 F97D*-4CLXM6- Magic Chef VM30A-4.1 Magic Chef B95-5CLX7P-80 Magic Chef M61C-8P.AX Magic Chef CMW12B3.4 Crosley CMW12B7.1-3 Crosley MW307-5P.AX Magic Chef M40B-3-1 Magic Chef MW217Z-6P.AX Magic Chef M41B-10O-B8.1 Magic Chef M40A-3-X9.5 Magic Chef M40A-3-X9.1 Magic Chef M40A-3.5 Magic Chef M40A-3.1 Magic Chef MW307-3.AX Magic Chef M41A-7P.1 Magic Chef M41B-10P.1 Magic Chef M41B-9P.3 Magic Chef M40B-3-X9.1 Magic Chef MCT1375L3 Electrolux MCT1375L1 Electrolux MW307-6.AX Magic Chef MW307-5.AX Magic Chef M41B-1.1 Magic Chef M41A-6P.1 Magic Chef MC1385L2 Electrolux M41A-6 Magic Chef M41B-1.2 Magic Chef MCT1375L2 Electrolux M41A-3.1 Magic Chef M41B-1.3 Magic Chef M41A-1.A Magic Chef 1.05UF 2100V GE MA1417W Goldstar M41B-2.1 Magic Chef M41B-9P.1-2 Magic Chef M41B-3.1 Magic Chef M41B-6.P.2 Magic Chef 1.05UF 2100V GE MA1417W Goldstar M41B-6.P.1 Magic Chef M41B-6.3 Magic Chef MW207-6P.AX Magic Chef MC1335L1 Electrolux CMW1507.AX Crosley M41B-6.1-2 Magic Chef M41B-3.P.1 Magic Chef MW207-4.AX Magic Chef MC1335L2 Electrolux MW207-2.AX Magic Chef M30A-6P.DX Magic Chef M41B-1.4 Magic Chef M30A-6P.AX Magic Chef MW217Z-4AX Magic Chef M30A-5P.AX Magic Chef M41B-6-X9.3 Magic Chef M22B-6-T6.1 Magic Chef M41B-6-X9.1-2 Magic Chef GON01 Magic Chef M22B-6.1 Magic Chef 56-8878-02 Tappan GT1195SHZ0 Whirlpool 56-5897-02 Tappan 56-5477-01 Tappan 56-4678-03 Tappan 56-5363-04 Tappan 56-4788-02 Tappan RMC275PDB1 Whirlpool 56-5363-03 Tappan M13P4NW WCI MG3090XBB0 Whirlpool 56-5363-01 Tappan GT1195SHQ0 Whirlpool MT3185SHB0 Whirlpool MT3090XAQ0 Whirlpool MT3090XBB0 Whirlpool 56-4678-15 Tappan 56-4994-09 Tappan 56-5363-02 Tappan 56-4878-02 Tappan GH9115SHB0 Whirlpool MG8120XDQ0 Whirlpool MG3090XAQ0 Whirlpool 56-3357-03 Tappan W10850446 Whirlpool, 5304519337
This universal microwave high-voltage capacitor is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 2100 VAC, 1.05 µF capacitor.
Commonly used in countertop, over-the-range, and built-in microwave models.
Always verify voltage and capacitance requirements before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Built to OEM-equivalent electrical specifications
⚡ 2100 VAC, 1.05 µF Rating – Supports proper magnetron operation
🔥 Restores Heating Function – Fixes microwave running but not heating
💪 Heavy-Duty Construction – Designed for high-voltage applications
💰 Cost-Effective Repair – Reliable alternative to OEM microwave capacitors
📐 Product Specification
Part Number: XPMWC21105
Component Type: Microwave High Voltage Capacitor
Voltage Rating: 2100 VAC
Capacitance: 1.05 µF (microfarad)
Application: High-voltage power supply circuit, 1/4" male terminals, Oval Shape
Mounting: Bracket-mounted
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, insulated pliers
⚠️ Safety First:WARNING: This high-voltage capacitor is for microwaves. High-voltage capacitor is an electric device that holds a charge of electricity in the high-voltage circuit of the microwave. Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part.
Basic Steps:
Unplug the microwave.
Remove the outer cabinet.
Safely discharge the existing capacitor.
Disconnect wiring and remove the old capacitor.
Install the new XPMWC21105 capacitor securely.
Reconnect wiring, reassemble the cabinet, and restore power.
Test microwave heating operation.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore microwave heating safely and efficiently — Add to Cart Now for a dependable, budget-friendly repair!
EXPHV11 Microwave High Voltage Diode (Rectifier)
Replaces:GE, LG, AMANA, ELECTROLUX, GE, KENMORE, MAYTAG, WHIRLPOOL, Frigidaire T3512, 3512, T4512, H, CL01-12, HVM12, 512 H, 12Kv, 350mA.
Replaces Part Numbers: 11QBP0236, AP5633254, PS4085133, AP3192533, PS239740 EA239740, WB27X10597, 13091701, AP6005641 PS11738693, WP13091701, 417726, 00188507 AP3382376 PS8712310, 00417726, PS11745270, AP6012063, 8205489, AP4357534, PS2339491, EA2339491, 5304467670, AP4564925, 3518400400, PS11745270, AP6012063, WP8205489, PS3654932, AP5631218, W10245187, W10492278.
Description: This Diode Assembly is a replacement part for specific microwave models. It plays a crucial role in converting alternating current (AC) to direct current (DC), which is essential for the microwave’s high-voltage functions, including powering the magnetron to generate microwave energy. Over time, diodes can fail due to electrical surges, excessive heat, or wear and tear. A faulty diode assembly can lead to inefficient or non-functional microwave operation, impacting its ability to heat food properly.
Microwave High Voltage Diode – Universal Replacement
Restore your microwave’s heating function with this high-quality high voltage diode. Built to handle up to 12,000V / 350mA, it’s a reliable replacement for worn or damaged diodes in many major brands.
Features:
Direct replacement for most microwave models
Durable and rated for high-voltage performance
Fixes common issues like no heat or humming
Fits brands: GE, Whirlpool, LG, Samsung, Panasonic, Frigidaire, and more.
⚠️ Installation should be done with power disconnected. Not sure if it fits? Contact us to confirm compatibility.
(6 Pack) EXPHV13 Microwave High Voltage Diode (Rectifier)
Replaces Part Numbers: W11256462, W10492278, W10886077, WPW10492276, WPW10575765, AP6784287, PS12584264, WPW10687786, W10687786, 4449228, AP6023790, PS11757136, 5304470521, AP4396425, PS2353199, WB27X10597, AH239740, EA239740, AP3192533, PS239740.
CL04-12A=500mA CL04-12 12kV
Description: This Diode Assembly is a replacement part for specific microwave models. It plays a crucial role in converting alternating current (AC) to direct current (DC), which is essential for the microwave’s high-voltage functions, including powering the magnetron to generate microwave energy. Over time, diodes can fail due to electrical surges, excessive heat, or wear and tear. A faulty diode assembly can lead to inefficient or non-functional microwave operation, impacting its ability to heat food properly.
EXPHV13 Microwave High Voltage Diode – OEM-Quality Replacement
Replace your faulty diode with the EXPHV13, a high-quality, aftermarket microwave high voltage diode rated for 12,000V / 500mA. It restores proper heating function and is compatible with many leading microwave brands.
Key Features:
✅ Rated for 12kV, 500mA
✅ Direct replacement for most standard microwaves
✅ Solves issues like no heat, humming, or tripped breakers
✅ Easy-to-install universal fit for GE, LG, Whirlpool, Panasonic, etc.
⚠️ Always disconnect power before installation. For compatibility questions, contact us—we’re happy to help!
📦 Part Number: EXPHV13💯 30-Day Money Back Guarantee
