Search results for "defrost heater"

WP12729128CM Refrigerator Defrost Heater Defrost Heater  115V, 135W heater with rubber grommets. Fits Whirlpool bottom mount refrigerators. Replaces Part Numbers:WP12729128, 12729128, AP6005557, PS11738607.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WR51X10101CM Refrigerator Defrost Heater 9 1/2 inch double glass tube heater. Note: Redesigned heater kit now uses two heating elements to give a better defrost cycle. It replaces the single element that was used on some models. 120V, 575W, 8" tube, 9 1/2" overall, dual tube with leads. Replaces Part Numbers:WR51X10101, 1399613, AH1993872, AP4355467, EA1993872, PS1993872, WR51X10032, WR51X10053, WR51X10097.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

ERP WR55X31113 Refrigerator Defrost Heater and Harness Assembly Fits Specific GE Refrigerator Models Description: This Defrost Heater Assembly is a replacement part compatible with specific GE refrigerator models. This assembly is responsible for preventing the buildup of ice and frost on the evaporator coils by providing controlled heat during the defrost cycle. It helps prevent ice accumulation that can hinder the refrigerator's ability to cool properly. Replaces Part Numbers:WR55X31113, AP6978638, PS12744078.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: California’s Proposition 65 

Read more less

ERP DA47-00311A Refrigerator Defrost Heater Replaces Part Numbers: DA47-00311A, AP5306643, PS4140651. fits specific Samsung Refrigerator models Description: This Refrigerator Defrost Heater Assembly is essential for maintaining your refrigerator's optimal performance. This replacement part ensures reliable defrost cycles, preventing ice buildup and enhancing cooling efficiency. Crafted with a durable heater sheath-metal, it withstands regular use and temperature fluctuations, providing long-lasting functionality. Installing the Refrigerator Defrost Heater Assembly helps restore your appliance defrost system, eliminating common issues like excessive frost and inconsistent temperatures. fits specific Samsung Refrigerator models   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

ER242044020 Refrigerator Defrost Heater Replaces Part Numbers:242044020, 1792999, 242044008, AH3408665, AP4567873, EA3408665, PS3408665   This is an aftermarket part that can be used as a replacement for the OEM part.  CALIFORNIA RESIDENT ONLY - Proposition 65 Warning:WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Read more less

XPARTCO WR49X10173 Refrigerator Dispenser Heater – Compatible with GE, Hotpoint & Kenmore Refrigerators Product Description Restore proper ice and water dispenser operation with the XPARTCO WR49X10173 Refrigerator Dispenser Heater. This high-quality aftermarket replacement heater prevents ice buildup and freezing inside the dispenser chute by gently warming the dispenser area. A failed dispenser heater can cause ice clogs, frozen chute doors, or dispensing issues. Replacing it with this reliable XPARTCO heater helps ensure smooth ice dispensing and consistent refrigerator performance. Replaces Part Numbers WR49X10173, 1381601, AH1766223, PD00001237, FIX1766223, AP4318572, EA1766223, PS1766223.  Compatibility This replacement refrigerator dispenser heater fits select GE, Hotpoint, and Kenmore (GE-manufactured) side-by-side refrigerators. Description: Dispenser water spout heater kit. For models that start with BSS, DSS, ESH, GSH, GSS, GST, HSS, and SSS with serial# AF - AM. Built between January 2003 - January 2007. Example compatible models include (but are not limited to):GE GSS25GSHSS, GSH25JSDBSSHotpoint HSS25GFTSAKenmore 363.9557710 Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM heating performance ❄️➡️🔥 Prevents Ice Buildup – Keeps dispenser chute clear and functional ⚡ Efficient Heating Element – Maintains proper dispenser temperature 💰 Cost-Effective Repair – Reliable alternative to OEM heater pricing 🛡️ Fixes Common Issues – Solves frozen dispenser, ice clogs, or slow dispensing 📐 Product Specification Part Number: WR49X10173 Component Type: Refrigerator Dispenser Heater Voltage: 120V AC Application: Ice and water dispenser chute heating Mounting: Direct-fit installation Material: Insulated heating element with OEM-equivalent wiring Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver ⚠️ Safety First: Unplug the refrigerator before servicing to avoid electrical shock. Steps: Disconnect power from the refrigerator. Remove the dispenser front panel. Locate the dispenser heater assembly. Disconnect wiring and remove the old heater. Install the new XPARTCO WR49X10173 heater. Reconnect wiring, reassemble the dispenser panel, and restore power. Test dispenser operation. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore smooth ice dispensing and prevent freeze-ups — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

XPARTCO DC47-00019A Dryer Heating Element Replaces WP35001247 The XPARTCO DC47-00019A is an aftermarket replacement universal-fit dryer heating element compatible with a wide range of electric dryers across multiple manufacturers — including Samsung, Whirlpool, Maytag, Amana, Inglis, and Kenmore. The heating element generates the heat that warms the air circulating through the dryer drum, evaporating moisture from wet clothes during each drying cycle. When the element fails, the dryer continues to tumble normally but produces no heat, leaving clothes damp at the end of a complete cycle. This replacement element comes pre-assembled with insulators and restring already attached, allowing for fast installation. Rated 240V, 5300W, with metal and ceramic construction. Overall dimensions are approximately 17"L x 6-1/2"W x 2-1/2"H. Important: this is a heating element assembly only — you must reuse the housing/cannister from your old element when installing the new one. It directly replaces DC47-00019A, 35001247, WP35001247, WP35001247VP, TJDC47-00019A, DE0019A, ERDC47-00019A, 35001119, 2068550, 1185561, AP4045884, AP4201899, AP6008695, AH2038533, EA2038533, EAP2038533, EAP11741835, PD00001991, PD00002996, PS2038533, PS4205218, and PS11741835. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO DC47-00019A Dryer Heating Element fixes Samsung, Whirlpool, Maytag, Amana, Inglis, and Kenmore electric dryers that tumble normally but produce no heat or take much longer than usual to dry. Universal-fit element — 240V, 5300W. 17"L x 6-1/2"W x 2-1/2"H. Insulators and restring pre-attached. Must reuse the housing/cannister from the old element. Replaces DC47-00019A, 35001247, WP35001247, WP35001247VP, TJDC47-00019A, DE0019A, ERDC47-00019A, 35001119, 2068550, 1185561, AP4045884, AP4201899, AP6008695, PS2038533, PS4205218, PS11741835. Common Problems This Part Fixes Dryer tumbles normally but produces no heat — element coil burned through Dryer takes significantly longer than usual to dry a load Clothes coming out damp or only partially dried at the end of a cycle Visible breakage in the element coil — snapped or burned-through Ni-Cr wire Dryer trips the circuit breaker when the heat setting is selected — shorted element Burning smell during operation — element arcing at a weak point in the coil Multimeter continuity test on the element shows an open circuit Replaces Part Numbers This dryer heating element directly replaces the following OEM and cross-reference part numbers across multiple brands: DC47-00019A, 2068550, AP4201899, ASM33630, AP2038533, DE0019A, ERDC47-00019A, PD00001991, PS4205218, TJDC47-00019A, WP35001247, 35001247, 1185561, AP6008695, AWP47390, EAP11741835, PD00002996, PS11741835, WP35001247VP. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This universal-fit heating element is compatible with select electric dryers from multiple manufacturers: Samsung electric dryers — DV2, DV3, DV4, DV5, DVE series (DV40J3000EW, DV42H5000EW, DV42H5200EW, DV42H5600EP, DV45H7000EW, DV48H7400EW, DV50F9A7EVW, DV50F9A7EVP, DVE50M7450W, DVE50R5200W, DVE50R5400V, DV203AEW, DV206LEW, DV209AEW, DV210AEW, DV419AEU, DV448AEE, DV448AEP, DV5471AEW and many related models) Whirlpool electric dryers (select models — see WP35001247 cross-reference) Maytag electric dryers (MDE6700AYW, MDE6700AZW, MDG6700AWM, MDG6700AWW and related) Amana electric dryers (NED7200TW10, YIED7200TW10 and related) Inglis electric dryers (select models) Kenmore / Sears electric dryers (Samsung and Whirlpool-built — select models) Important — Reuse Existing Housing: This listing is for the heating element assembly only — the metal housing/cannister that the element sits inside is not included. You must reuse the housing from your old element. Remove the old element from its housing, then install the new DC47-00019A element into that same housing before reinstalling in the dryer. Also: this part is for electric dryers only — gas dryer models use different components. Always verify your specific model number before ordering. Key Features Universal-fit replacement heating element for multiple dryer manufacturers — replaces both Samsung DC47-00019A and Whirlpool/Maytag WP35001247 part numbers Generates the heat that warms drying air — essential for the dryer to actually dry clothes Pre-strung Ni-Cr (nickel-chromium) heating wire — high heat conductivity and resistance to warping over time Insulators and restring already attached — ready for installation into the existing housing Rated 240V, 5300W — correct electrical specifications for compatible electric dryers Dimensions: 17"L x 6-1/2"W x 2-1/2"H Metal and ceramic construction — durable for repeated heat/cool cycles Electric dryers only — NOT compatible with gas dryer models Important: heating element assembly only — must reuse the housing/cannister from the old element Replaces 22+ OEM and cross-reference part numbers across Samsung, Whirlpool, Maytag, Amana, and related brands Aftermarket replacement built to OEM-equivalent quality standards Quick DIY repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number XPDC47-00019A Also Replaces (Whirlpool-side) WP35001247, 35001247 Part Type Dryer Heating Element Assembly (Universal Fit) Condition Aftermarket Replacement Application Electric Dryers Only (NOT gas) Voltage 240V AC Wattage 5300W Terminal Connections 2 spade terminals Dimensions 17"L x 6-1/2"W x 2-1/2"H Material Metal / Ceramic / Ni-Cr coil wire Includes Heating element assembly with insulators and restring pre-attached (housing NOT included — reuse old) Compatible Brands Samsung, Whirlpool, Maytag, Amana, Inglis, Kenmore Installation Notes ⚠️ Unplug Dryer Before Starting — Do Not Touch the Element with Bare Hands Disconnect power before beginning. Wear work gloves throughout — there are sharp sheet metal edges inside the dryer cabinet. The new heating element coil is sensitive to skin oils, which can cause premature burnout — handle the element only by the metal frame, not the coil wire. Remove the rear panel of the dryer to access the heating element housing/cannister. Take a photo of all wire connections and the orientation of the element before disconnecting anything. Disconnect the wires from the old element terminals and remove the housing from the dryer. With the housing on a workbench, remove the old element from inside the housing — note exactly how it sits and how the restring is positioned. Install the new DC47-00019A element into the same housing, following the same orientation as the old element. Do not let the Ni-Cr heating wire touch the housing during installation — this can cause arcing and immediate burnout. Reinstall the housing in the dryer, reconnect all wires snugly to the correct terminals, and reinstall the rear panel. Restore power and run a test heat cycle to confirm the dryer is heating properly. While the rear panel is open, inspect the high-limit thermostat, thermal fuse, and thermistor — if the element failed due to overheating, these may also be stressed. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves. Frequently Asked Questions Does this really fit both Samsung AND Whirlpool dryers? Yes — this is one of the more unusual cases in dryer parts where an aftermarket heating element has been designed to serve as a direct replacement for both the Samsung DC47-00019A and the Whirlpool/Maytag WP35001247 (35001247) elements. The two OEM elements share the same physical dimensions, electrical specifications (240V, 5300W), and terminal configuration, allowing a single aftermarket element to function correctly in both platforms. Compatible models span Samsung's DV series, Whirlpool/Maytag's affected dryers (MDE6700/MDG6700 and similar), and select Amana, Inglis, and Kenmore Whirlpool-built or Samsung-built models. Always verify your specific model number before ordering. Why do I need to reuse the housing from the old element? This listing is for the heating element assembly only — the metal cannister or housing that contains the element is not included. The housing is a heavy gauge metal enclosure with mounting brackets that secure it to the dryer cabinet, along with airflow ducting that directs air across the heating coil. Reusing the housing keeps the cost down and is standard practice for this type of replacement. Carefully remove the old element from the housing, install the new element in its place, and then reinstall the housing in the dryer. If your housing is damaged or burned through, it will need to be replaced separately. How do I know if the heating element has failed? The clearest sign is a dryer that tumbles and runs through a complete cycle normally but produces little or no heat, leaving clothes damp at the end. You may also notice the dryer taking much longer than usual to dry a load as it tries to compensate. Visually inspecting the element after removing the rear panel can reveal burn marks, breaks in the coil, or visible arcing damage. A multimeter continuity test on the disconnected element will also confirm failure — a working element shows continuity, while a failed element reads an open circuit (no continuity). Should I replace the thermal fuse and thermostats at the same time? It's a good idea to inspect them. When a heating element fails — especially if it failed due to overheating rather than simple end-of-life wear — the paired thermal fuse, high-limit thermostat, and thermistor located in the same area can also be stressed by the heat event. Since the rear panel must already be open to replace the element, checking these components' continuity with a multimeter is a quick step that can prevent a repeat repair if any of them are also on the verge of failing. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung or Whirlpool OEM part, but is manufactured to match the electrical specifications (240V, 5300W), dimensions, and Ni-Cr coil construction of the original DC47-00019A and WP35001247 heating elements that it replaces. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

Choice 5301EL1001J Dryer Heating Element Assembly - Compatible with LG, Kenmore Product Description Restore efficient drying with the replacement 5301EL1001J Dryer Heating Element Assembly. This heating element assembly is designed for select LG and Kenmore electric dryers, providing consistent heat (5400W, 240V) to dry clothes effectively. It includes the heating element, housing, high-limit thermostat, and thermal fuse, addressing issues like no heat, insufficient heat, or prolonged drying times, offering a cost-effective alternative to OEM parts. Note: Includes one heating element assembly with housing, thermostat, and fuse. Disconnect power before installation. Check dryer venting and related components for optimal performance. Replaces part numbers: 5301EL1001J, 5301EL1001A, 1377645, AEG72910307, AH3527791, AP4439759, EA3527791, PS3527791, 5301EL1001H, 1377645, 5301EL1001E, 5301EL1001G, 5301EL1001S, 5301EL1001U, 5301EL1001W, PD00001731, EAP3527791, AH3527790, AP5072170, EA3527790, PS3527790. Compatibility: Compatible with models including but not limited to: LG: DLE0442W, DLE2516W, DLE5977W, DLE7177WM, DLE8377NM, DLE9577WM, DLEX4070V, DLEX8000W, DLEX5680W Kenmore: 796.81022900, 796.91022900 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select LG and Kenmore electric dryers. 🔥 Specifications: replacement heating element assembly, 5400W, 240V. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 45–60 minutes. 🛡️ Effective Fixes: Resolves no heat, insufficient heat, or prolonged drying times. Product Specification Part Number: 5301EL1001J Component Type: Dryer heating element assembly Material: Metal (nickel-chromium alloy coil), ceramic insulators, metal housing Electrical Specs: 5400W, 240V. Mounting: Screw-mounted in dryer heater housing Operating Conditions: Suitable for high-heat dryer environments Compliance: UL-listed components, Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer performing optimally today! Add to cart now for a budget-friendly fix!

Read more less

W10856574CM Refrigerator Heat Probe The drop heat probe attaches to defrost heater to assist in defrosting the drain. Fits Whirlpool refrigerators. Replaces Part Numbers: W10856574,  2258429, AP5999252, PS11731328.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO DC93-00154A Dryer Heater Assembly The XPARTCO DC93-00154A is an aftermarket replacement complete heater assembly for Samsung electric dryers, and also fits select Kenmore models. This is a fully assembled unit in a metal housing duct that combines the heating element itself with its high-limit thermostat and thermal fuse, all in one part, so replacing this assembly addresses the entire heat-generating and thermal-protection system together. This is a dual coil, 3-wire/3-terminal heater. If your dryer's heating element connects with only 2 wires instead of 3, this is not the correct part — you'll need part number DC97-14486A instead. Rated 240V, 3700W, finished in gray/black, constructed of metal, plastic, and ceramic. Measures approximately 19-1/2"L x 5-1/8"W x 7-3/4"H, with a duct opening of about 5" diameter on one end and approximately 5-1/2"L x 3-3/4"W on the opposite end. Symptoms of a failing assembly include the dryer not heating, taking too long to dry, cycles stopping prematurely, error codes, or a burning smell. It directly replaces DC93-00154A, 3282568, AP5582094, ASM35158, EAP4216214, OEM16746291, PD00002235, PS4216214. Quick Answer The XPARTCO DC93-00154A Dryer Heater Assembly fixes Samsung and select Kenmore electric dryers that won't heat, take too long to dry, stop cycles prematurely, show a heat-related error code, or produce a burning smell. Complete assembly: heating element, housing duct, L260-50F hi-limit thermostat, and thermal fuse. Replaces DC93-00154A, 3282568, AP5582094, ASM35158, EAP4216214, OEM16746291, PD00002235, PS4216214. This is a 3-wire heater. If your dryer's element uses only 2 wires, order DC97-14486A instead — check your old part before ordering. What's In The Assembly Component Function Heating Element (3-wire, dual coil) Generates the heat used to dry clothes throughout the cycle. Metal Housing Duct Houses the element and directs heated air into the dryer drum. L260-50F Hi-Limit Thermostat Cuts power to the element if temperature exceeds a safe limit; automatically resets once cooled. Thermal Fuse One-time backup safety device that permanently opens the circuit if overheating continues. Common Problems This Assembly Fixes Dryer runs a full cycle but produces no heat Dryer produces insufficient heat, taking too long to dry Cycles stopping prematurely before clothes are dry Heat-related error code displayed on the control panel Burning smell during operation Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer heater assembly directly replaces the following OEM and cross-reference part numbers: DC93-00154A, 3282568, AP5582094, ASM35158, EAP4216214, OEM16746291, PD00002235, PS4216214 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This heater assembly is compatible with select Samsung electric dryers, and also fits select Kenmore dryers built on the Samsung platform, including model numbers such as DV42H5000EW/A3, DV45H7000EW/A2, and DV40J3000EW/A2. Note — 3-wire heater, not 2-wire: This assembly's heating element connects with 3 wires/terminals. If your dryer's element instead connects with only 2 wires, this is not the correct assembly — you'll need part number DC97-14486A instead. Always verify your full model number and wire count before ordering. Contact our support team with your model number if you're unsure which assembly your dryer needs. Key Features Aftermarket replacement complete heater assembly — element, housing, thermostat, and fuse together Resolves "no heat," "insufficient heat," "premature cycle stop," and "burning smell" symptoms Dual coil, 3-wire/3-terminal heating element Fully assembled in a durable metal housing duct Includes L260-50F hi-limit thermostat and thermal fuse for complete thermal protection Rated 240V, 3700W Approximately 19-1/2"L x 5-1/8"W x 7-3/4"H Replaces DC93-00154A, 3282568, AP5582094, ASM35158, EAP4216214, OEM16746291, PD00002235, PS4216214 Compatible with Samsung and select Kenmore electric dryers Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number XPDC93-00154A OEM Part Number DC93-00154A Part Type Dryer Complete Heater Assembly Condition Aftermarket Replacement Wire Count 3-wire / 3-terminal (dual coil) Includes Heating element, metal housing duct, L260-50F hi-limit thermostat, thermal fuse Voltage 240V Wattage 3700 W Color Gray / Black Material Metal / Plastic / Ceramic Dimensions Approx. 19-1/2"L x 5-1/8"W x 7-3/4"H Duct Opening (one end) Approx. 5" diameter Duct Opening (opposite end) Approx. 5-1/2"L x 3-3/4"W Weight Approx. 4.23 lbs Related Part DC97-14486A (2-wire version, for different models) Repair Difficulty Moderate Quantity 1 heater assembly Compatible Brands Samsung, Kenmore Installation Notes ⚠️ Unplug Dryer Before Starting — Confirm 3-Wire Connection Before Ordering Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Remove the rear access panel to locate the heating element housing. Before disconnecting anything, confirm your old element connects with 3 wires — if it only has 2, stop and order DC97-14486A instead, since this assembly won't be a correct match. Photograph the wiring connections carefully before disconnecting anything. Disconnect the wiring harness from the old assembly, remove the mounting hardware securing it in the duct housing, and pull it free. Install the new DC93-00154A in the same position, reconnect the wiring harness exactly as photographed, and secure the mounting hardware. Reassemble the rear access panel. Restore power and run a test cycle to confirm the dryer heats normally with no error codes. While you have the dryer open, this is also a good opportunity to check your exhaust venting for lint buildup or restrictions, since airflow problems are a common contributor to heating element failure. Tools needed: Phillips screwdriver or nut driver (model-dependent), work gloves. Frequently Asked Questions My dryer isn't heating. Is this the right part? Yes, this is one of the most common symptoms this complete assembly addresses. Since it includes the heating element along with its hi-limit thermostat and thermal fuse, a fault in any of these related components can result in no heat, and replacing the full assembly resolves whichever part has actually failed. How do I know if I need this assembly or the 2-wire version? Check how many wires connect to your dryer's current heating element. This DC93-00154A assembly is built for a 3-wire, dual coil connection. If your dryer's element instead uses only 2 wires, you'll need part number DC97-14486A, which is designed for that different wiring configuration on other Samsung models. Does this include the thermostat and fuse, or do I need to buy those separately? They're included. This is a complete assembly with the heating element, metal housing duct, an L260-50F hi-limit thermostat, and a thermal fuse all in one part, so there's no need to source these separately. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the element design, wattage, housing, and thermal protection configuration of the original DC93-00154A assembly used in compatible Samsung and Kenmore electric dryers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

DC97-14486A Dryer Heating Element - Compatible with Samsung, Kenmore Product Description Restore efficient drying with the replacement DC97-14486A Dryer Heating Element. This heating element is designed for select Samsung and Kenmore electric dryers, providing consistent heat (5300W, 240V) to dry clothes effectively. It addresses issues like no heat, insufficient heat, or prolonged drying times, offering a cost-effective alternative to OEM parts. Note: Includes one heating element assembly. Disconnect power before installation. Check dryer venting and related components for optimal performance. Replaces part numbers: DC97-14486A, DC97-14486D, DC97-08891A, PD00002003, EAP2432265, AP4342351, PS4220205. Compatibility: Compatible with models including but not limited to: Samsung: DV330AEW/XAA, DV350AEW/XAA, DV42H5000EW/A3, DV42H5200EP/A3, DV45H7000EW/A2, DV48H7400EW/A2 Kenmore: 402.99032010, 402.99032011 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Samsung and Kenmore electric dryers. 🔥 Specifications: replacement heating element, 5300W, 240V. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 30–45 minutes. 🛡️ Effective Fixes: Resolves no heat, insufficient heat, or prolonged drying times. Product Specification Part Number: DC97-14486A Component Type: Dryer heating element assembly Material: Metal (nickel-chromium alloy coil) and ceramic insulators Electrical Specs: 5300W, 240V. Mounting: Screw-mounted in dryer heater housing Operating Conditions: Suitable for high-heat dryer environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer performing optimally today! Add to cart now for a budget-friendly fix!

Read more less

WE11X10007 Dryer Genuine Heater Element Kit   Replacement Heater Restring only for WE11M23 Heater. Replaces: WE11X10007 (Heating Element Coil Kit Only)   Heater Holder are included   The diameter of the coils are 7/16" OD it stretches around the pan through the ceramic insulators.   Replaces Part Number: WE11X10007, 824395, AH265605, EA265605, WE11M0016, WE11M0018, WE11M16, WE11M18, WE25M0027, WE25M27, AP2620171, OEM10480686, PS265605. 

Read more less