XPARTCO W10384183 Refrigerator Thermistor Replaces WPW10384183
The XPARTCO W10384183 is an aftermarket replacement thermistor for Whirlpool refrigerators, and also fits select Kenmore, Maytag, Amana, KitchenAid, and Ikea models. This sensor detects the temperature inside the refrigerator or freezer and sends that reading to the electronic control board, which uses it to regulate cooling and manage the defrost cycle.
Finished in black and white, made of plastic and metal, this thermistor measures approximately 4-1/2"L x 9/16"W x 1/4"H, with a 1" probe and a 3.5" lead. Includes the thermistor with its probe and wiring harness/plug. Over time, the sensor's electronics can drift or fail from age or moisture exposure. Because this sensor also plays a role in the defrost cycle on many models, a failing thermistor can cause the evaporator coils to overly frost or ice up, blocking airflow and preventing cool air from reaching the refrigerator compartment even though the freezer itself may still seem cold. Symptoms include inconsistent cooling, a refrigerator that isn't cooling despite a cold freezer, or the appliance failing to defrost properly. It directly replaces WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996.
Quick Answer
The XPARTCO W10384183 Refrigerator Thermistor fixes Whirlpool, Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators with inconsistent cooling, a refrigerator compartment that isn't cooling despite a cold freezer, or improper defrosting. Black/white, plastic/metal, ~4-1/2"L x 9/16"W x 1/4"H, 1" probe, 3.5" lead. Replaces WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996. If your freezer's evaporator coils are heavily frosted or iced over, blocking airflow into the refrigerator, this thermistor is a strong candidate for the cause.
Common Problems This Part Fixes
Inconsistent cooling in the refrigerator or freezer compartment
Refrigerator not cooling despite the freezer feeling cold
Evaporator coils overly frosted or iced over, blocking airflow
Refrigerator not defrosting properly
Temperature fluctuations affecting food freshness
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator thermistor directly replaces the following OEM and cross-reference part numbers:
WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermistor is compatible with select Whirlpool refrigerators, and also fits select Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators built on the Whirlpool platform.
Note: A related but separate thermistor, W10384184, is used on some of the same or similar models and is sometimes sold as a paired kit alongside this part. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which thermistor your refrigerator needs.
Key Features
Aftermarket replacement thermistor — senses temperature and reports to the electronic control
Resolves "inconsistent cooling," "refrigerator not cooling despite cold freezer," and "improper defrosting" symptoms
Includes thermistor with probe and wiring harness/plug
Black/white, plastic/metal construction
Direct drop-in replacement — no modification required
Replaces WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996
Compatible with Whirlpool, Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Typical repair takes 30 to 60 minutes
Product Specifications
Part Number
W10384183
OEM Part Number
WPW10384183
Part Type
Refrigerator Thermistor
Condition
Aftermarket Replacement
Color
Black / White
Compatible Brands
Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Ikea
Includes
Thermistor with probe and harness/plug
Function
Senses internal temperature and reports to the electronic control
Repair Difficulty
Easy to Moderate — 30 to 60 minutes
Quantity
1 thermistor
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Defrost Any Iced-Over Coils First Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Remove the interior panel covering the evaporator coils, typically located in the freezer. If the coils and fins are heavily frosted or iced over, allow them to fully defrost before continuing — you can speed this up with a hair dryer on a low setting, kept a safe distance away, or simply let the unit sit unplugged with the door open for a few hours. With the coils clear, locate the old thermistor and unclip it from its mounting position, noting how it's routed. Unclip the wiring harness from the old thermistor. Clip the new W10384183 thermistor into the same position, and reconnect the wiring harness fully, making sure the probe is positioned exactly as the original was. Reinstall the interior panel. Restore power and monitor the refrigerator's temperature over the next 24 hours to confirm consistent, accurate cooling and normal defrost cycling have returned. Tools needed: sockets, screwdriver, multimeter (for testing the old sensor), work gloves.
Frequently Asked Questions
My freezer feels cold but the refrigerator side isn't cooling. Is this the part I need?
Yes, this is a documented pattern tied to this thermistor. One customer described their evaporator coils and fins as "overly freezing," which blocked cool air from reaching the refrigerator compartment even though the freezer itself was fine. Replacing this thermistor, after first defrosting the iced-over coils, resolved the issue.
My refrigerator isn't defrosting properly. Could this be the cause?
Yes, this is a documented symptom. One customer specifically described their unit "not defrosting" and resolved it by replacing this sensor, calling the repair "very straightforward." Since this thermistor feeds temperature data into the defrost cycle on many models, a failing sensor can prevent the defrost system from operating correctly.
Do I need to defrost the coils before replacing this part?
If your evaporator coils are heavily frosted or iced over, yes — clear that ice first so you can properly access and route the new thermistor, and so you can accurately judge whether the repair has resolved the airflow problem once everything is back together.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the sensing function, probe design, and wiring harness configuration of the original WPW10384183 thermistor used in compatible Whirlpool, Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WB02X35488 (2 Pack) Microwave Halogen Light Bulb
Product Overview
The XPARTCO WB02X35488 Microwave Halogen Light Bulb provides bright interior illumination for your microwave, allowing you to clearly monitor cooking progress. Brighten your microwave with the replacement WB02X35488 Microwave Halogen Light Bulb. This high-quality Light bulb, designed for GE, Hotpoint, and Kenmore/Sears microwaves, provides clear illumination for the interior or surface below, ensuring easy monitoring of your cooking. Featuring a G8 bi-pin base (120V, 50W, 3000K warm white), this durable halogen bulb offers reliable performance and easy installation.
Quick Answer
If your microwave light is dim, flickering, or not working, the WB02X35488 halogen bulb may be burned out. Replacing it restores clear visibility while cooking.
Replaces Part Numbers
Replaces OEM part number: WB02X35488, WB08X10057, WB08X10051, WB25X25393, WB36X10292, AGE368071, PD00070655, EAP6989401, AP6989401, PS16216934.
Compatibility
This microwave halogen light bulb is compatible with select GE, Hotpoint, and other GE-manufactured microwaves.
GE: CSA1201RSS01, CSA1201RSS02, CSA1201RSS03, CVM1790SS1SS, CVM1790SS2SS, JVM1790BK01, JVM1790CK01, JVM1790SK01, JVM1790WK01, JNM3163RJ1SS, JNM3163RJ2SS, JNM3163RJ3SS
Hotpoint: Select models requiring WB08X10057 or compatible halogen bulbs
Kenmore/Sears: Select models requiring WB08X10057 or compatible halogen bulbs
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Microwave interior light not working
Dim or flickering light
Reduced visibility while cooking
Key Features
Bright halogen illumination
Restores clear interior visibility
High-quality aftermarket replacement
Easy bulb replacement design
Product Specifications
Part Number: WB02X35488
Part Type: Microwave Halogen Light Bulb, 120V, 50W, G8 bi-pin base, 1.69" x 0.5", 3000K warm white, 2400 lumens, dimmable, 2000-hour average life, copper contacts.
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Microwave Interior Lighting
Troubleshooting Guide
No interior light → Burned out bulb
Flickering light → Failing bulb
Dim light → Aging or damaged bulb
When Should You Replace This Bulb?
Replace this bulb if your microwave interior light is not functioning properly or has become dim or inconsistent.
Installation Notes
⚠️ Disconnect power before installation. Allow the bulb to cool before handling and replace carefully according to your microwave model.
Related Parts
Microwave Door Switch
Control Panel
Turntable Motor
Frequently Asked Questions
Will this bulb fit my microwave?This bulb fits many GE and compatible models. Always verify your model number.
Is this a halogen bulb?Yes, this is a halogen light bulb designed for microwave use.
What are signs of a bad bulb?No light, dim light, or flickering indicates replacement is needed.
Is installation difficult?Most bulbs are easy to replace, but always follow your appliance manual.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
4TM-B12 Refrigerator / Freezer Compressor Overload 1/2 HP
Refrigerator / Freezer Thermal Overload Protector
1/2 HP (375W) - 110V
4TM-B
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
CON-5-370-R HVAC ROUND MOTOR RUN CAPACITOR
Appli Parts Run Capacitor for ac 5 Mfd uF (microfarads) 370 VAC
Appli Parts Run Capacitor for ac 5 Mfd uF (microfarads) 370 VAC Round Universal fit for hvac and other applications 2-1/2 in High 1-1/2 in Wide CON-5-370Universal: Replaces any brand with the same capacitance capacity and voltage. Will work for 370V . 1/4 in Male Quick-connectSpecs: Tolerance is +/- 5 % of Capacity, Working temperature environment from -40F (-40C) to +185F (85C). Dimensions 2-5/8 in H, 1-1/2 in WProtection: Protected for 10,000AFC which means this product will not burst if by any reason is short circuitsReplaces: TRCF5 PRCF5A CAP-5-370Confirm that the dimensions and other attributes of the product closely match those of the original item being replaced
WG446 Microwave Universal Mica Sheet, Waveguide Cover (Pack of 2) – Compatible with Most Microwave Brands
Product Description
Protect your microwave from sparking, arcing, and grease buildup with the WG446 Microwave Universal Mica Sheet / Waveguide Cover (Pack of 2). These high-quality aftermarket mica sheets shield the waveguide opening from moisture, steam, and food splatter, helping maintain efficient and safe microwave operation. Ideal for replacing damaged, burnt, or contaminated covers, this 2-pack offers excellent value and universal fit.
Replaces Part Numbers
WG446, Universal Mica Waveguide Cover and equivalent microwave mica sheet replacements
Compatibility
This universal waveguide cover 2-pack fits a wide range of Samsung, Whirlpool, GE, LG, Panasonic, Sharp, Kenmore, Emerson, and many other microwaves that use cut-to-fit mica sheets.
Suitable for models such as (but not limited to):LG LMV1762ST, Samsung ME16H702SES, Whirlpool WMH31017HZ, GE JVM3160RFSS, Panasonic NN-SN686S.
Always match the original cover’s dimensions before installation. Contact our support team if you’re unsure.
✅ Key Features
🔄 Universal Aftermarket Replacement – Cut-to-fit design works with most microwave brands
🧱 High-Heat Protection – Prevents debris from entering the waveguide and causing sparks
✂️ Trim-to-Size Sheets – Easy to cut using scissors or a utility knife
💰 2-Pack Value – Keep an extra sheet available for future replacements
🛡️ Fixes Common Issues – Eliminates sparking, burning smell, poor heating, or arcing caused by damaged covers
📐 Product Specification
Part Number: WG446
Component Type: Microwave Mica Sheet / Waveguide Cover
Material: Heat-resistant mica composite
Dimensions: Approx. 5.9"L x 4.7"W (15 cm x 12 cm) (can be trimmed to size)
Thickness: standard mica insulation
Mounting: Clips or screws depending on microwave model
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Scissors or utility knife, screwdriver (if screws are used)
⚠️ Safety First: Unplug the microwave before installation. Never operate without a waveguide cover.
Steps:
Disconnect power and remove the old waveguide cover.
Use the original cover as a template to trace and cut the new WG446 sheet.
Insert the new cover into the mounting clips or secure with screws.
Repeat with the second sheet if needed.
Restore power and test heating.
⏱️ Time Required: 5–10 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Prevent microwave sparking and prolong appliance life — Add to Cart Now for a cost-effective, universal repair solution!
DA32-10105RCM Refrigerator Temperature Sensor
Replaces Part Numbers: DA32-10105R, DA32-00006W, DA32-00006U, 2030342, DA32-00006B, DA32-00006C, DA32-00006D, DA32-00006L, DA32-00006M, DA32-00006T, DA32-00006V, AP4135567, PS4138681.
1" probe, 25.75" lead with two pin connectors.
Fits Specific Samsung Refrigerator Models.
This Defrost Sensor is a replacement part designed specific Samsung refrigerator models. This sensor, sometimes referred to as a defrost thermostat or defrost temperature sensor, is an integral part of your refrigerator's defrost system.
This is an aftermarket part that can be used as a replacement for the OEM part.
W10341320 (OE) Refrigerator Water Inlet Valve
The W10341320 (OE) is an Original Equipment (OE) replacement dual secondary water inlet valve compatible with a wide range of Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerators. This dual-solenoid valve controls water flow to two destinations — the refrigerator's water dispenser and the ice maker. Each solenoid opens independently when the control board calls for water at that destination, and closes the moment the call is dropped. When one or both solenoids fail, you lose water at the dispenser, ice production stops or slows, or the valve begins leaking at its connections.
Rated 110/120V, 50/60Hz. Dual solenoid: W1 = 20W, W2 = 35W. Important: this is the SECONDARY valve, not the primary water inlet valve — many Whirlpool side-by-side refrigerators use both, and if your primary valve is working fine but you're still losing water or ice, the secondary valve is the likely culprit. It directly replaces WPW10341320, AP6019939, PS11753250, EAP11753250, 1937969, and K-78032. Common repair for leaks at the valve connections. Installs in about 30 minutes with basic hand tools and novice repair experience.
Quick Answer
The W10341320 (OE) Refrigerator Water Inlet Valve fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore side-by-side refrigerators with no water through the door, an ice maker that won't make ice or makes too little ice, or leaking at the valve connections. Dual secondary valve — dual solenoid (W1=20W, W2=35W), 110/120V, 50/60Hz. Original Equipment (OE) — same design and performance as the factory part, without the OEM label. Replaces WPW10341320, AP6019939, PS11753250, EAP11753250, 1937969, K-78032. This is the SECONDARY valve — not the primary water inlet valve (W10238100).
Common Problems This Part Fixes
No water dispensing through the door — dispenser solenoid failed
Ice maker not making ice — ice maker solenoid failed
Ice maker dispensing too little ice — solenoid partially failed or restricted
Water leaking from the valve or its connections
Water dispenser works but ice maker doesn't (or vice versa) — one of the two solenoids has failed
Weak or slow water flow at the dispenser
Ice cubes coming out hollow, small, or misshapen from insufficient water fill
Valve buzzing or humming without opening
Primary valve tests fine but the refrigerator still won't dispense water or make ice
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dual secondary water inlet valve directly replaces the following OEM and cross-reference part numbers:
W10341320, WPW10341320, AP6019939, AWP49977, PD00004978, PS11753250, EAP11753250, 1937969, K-78032
If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Note: the primary water inlet valve on many of these refrigerators is a different part (W10238100 / WPW10238100) — see the FAQ below on primary vs secondary valves.
Compatibility
This dual secondary water inlet valve is compatible with select side-by-side refrigerators from the following brands:
Whirlpool side-by-side refrigerators — select models (verify with parts diagram)
Maytag side-by-side refrigerators — MSB26C6MDE00/DE02, MSB26C6MDH00/DH02, MSB26C6MDM00/DM02, MSB27C2XAB00, MSB27C2XAM00, MSB27C2XAW00, MSC21C6MDM00/DM02, MSC21C6MEZ00, MSC21C6MFZ00, MSS26C6MEZ00, MSS26C6MFB00/FB01, MSS26C6MFW00 and related models
Jenn-Air side-by-side refrigerators — JSC23C9EEM00, JSC24C8EAM00/AM01/AM02 and related models
KitchenAid side-by-side refrigerators — select models
Amana, Magic Chef, Admiral, Norge, Roper side-by-side refrigerators — select Whirlpool-built models
Kenmore / Sears side-by-side refrigerators — select Whirlpool-built models
Important — This Is the SECONDARY Valve, Not the Primary: Many Whirlpool-platform side-by-side refrigerators use TWO water inlet valves: a primary valve (typically W10238100 / WPW10238100) where the household water line enters the refrigerator, and this dual secondary valve (W10341320) that splits flow between the dispenser and the ice maker. If your primary valve is functioning correctly but you're still not getting water or ice, the secondary valve is the likely culprit. Before ordering, confirm which valve your refrigerator's parts diagram calls for at the position you're replacing. Contact our support team with your model number if you're unsure.
Key Features
Original Equipment (OE) replacement — produced to the same design and performance standards as the factory part but not sold under the appliance brand's OEM label; provides the same fit and function at a more affordable price
Dual secondary water inlet valve — supplies water to both the refrigerator's water dispenser and the ice maker
Dual-solenoid design: each solenoid opens independently when the control board calls for water at that destination
Electrical specs: 110/120V, 50/60Hz · W1 = 20W, W2 = 35W
Resolves "no water through door," "ice maker doesn't make ice," "too little ice," and "leaking at connections" symptoms
Common fix for leaks at the valve's water line connections
Replaces WPW10341320, AP6019939, PS11753250, EAP11753250, 1937969, and K-78032
Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerators
Note: this is the SECONDARY valve — the primary water inlet valve is a different part (W10238100)
DIY repair — installs in about 30 minutes with basic hand tools and novice repair experience
Product Specifications
Part Number
W10341320-OE
Designation
OE (Original Equipment)
OEM Part Number
WPW10341320
Part Type
Refrigerator Dual Secondary Water Inlet Valve
Condition
OE Replacement
Application
Side-by-Side Refrigerators (Whirlpool platform)
Valve Position
SECONDARY (not the primary inlet valve)
Solenoids
Dual — W1 = 20W, W2 = 35W
Voltage
110/120V
Frequency
50/60 Hz
Supplies Water To
Water dispenser + Ice maker
Related Part
Primary Water Inlet Valve (W10238100 / WPW10238100, sold separately)
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore
Installation Notes
⚠️ Unplug Refrigerator and Shut Off Water Supply Before Starting — Wear Work Gloves Unplug the refrigerator (or shut off the house circuit breaker for the appliance) and turn off the refrigerator's water supply at the shutoff valve before beginning. Wear work gloves to protect your hands. Safely store any food that could spoil during the repair. Have towels ready — residual water remains in the lines and will spill when disconnected. Pull the refrigerator away from the wall to access the rear. The secondary water inlet valve is typically mounted at the back of the refrigerator, downstream of the primary valve where the household water line enters. Photograph the water line and wire harness connections before disconnecting anything — with two solenoids and multiple water lines, correct reconnection matters. Disconnect the water lines from the valve (use a 1/2" wrench where needed) and catch any residual water with a towel. Disconnect the electrical connectors from both solenoids. Remove the mounting screws holding the valve bracket in place and lift out the old valve. Install the new W10341320 (OE) valve in the same position and orientation, secure the mounting hardware, and reconnect the water lines — tighten fittings snugly without over-torquing. Reconnect the electrical connectors to the correct solenoids, matching your photos. Turn the water supply back on and check every connection for leaks BEFORE pushing the refrigerator back into place. Restore power. Run water through the dispenser for a few minutes to purge air from the lines, and discard the first few batches of ice. Tools needed: Multi-screwdriver, 1/2" wrench, nut driver, towels, work gloves.
Frequently Asked Questions
What does "OE" mean and how is it different from Genuine OEM?
OE (Original Equipment) parts are produced to the same design and performance standards as the original factory part, but they are not sold under the appliance brand's OEM label. They provide the same fit and function as the OEM part at a more affordable price. The W10341320 (OE) water inlet valve matches the electrical specifications (110/120V, 50/60Hz, dual solenoid W1=20W / W2=35W), dual-secondary valve design, connections, and physical fit of the original Whirlpool OEM part, and installs identically. The main difference from a Genuine OEM Whirlpool part is the branding and warranty — the OE version delivers equivalent performance without the OEM price premium.
What's the difference between the primary and secondary water inlet valve?
Many Whirlpool-platform side-by-side refrigerators use two water inlet valves working in series. The primary valve (typically W10238100 / WPW10238100) is where the household water supply line first enters the refrigerator — it's the main gatekeeper for water entering the appliance. The secondary valve (this W10341320) sits downstream and splits that flow between the water dispenser and the ice maker via its two independent solenoids. Both can fail independently. The key diagnostic: if the primary valve is working correctly (water is reaching the refrigerator) but you're still not getting water at the dispenser or ice from the ice maker, the secondary valve is the likely culprit. Check your model's parts diagram to confirm which valve you need.
My water dispenser works but the ice maker doesn't — can this still be the valve?
Yes, absolutely. This is a dual-solenoid valve — one solenoid feeds the water dispenser, the other feeds the ice maker. They fail independently. If your dispenser works fine but the ice maker isn't getting water (no ice, or hollow/small cubes), the ice maker solenoid on this valve may have failed while the dispenser solenoid still works. The reverse is also true. Before replacing the valve, also verify the ice maker itself is turned on (check the wire signal arm position) and that the water line to the ice maker isn't frozen or kinked — those produce similar symptoms.
Is this a common fix for leaks?
Yes — leaks at the water inlet valve's connections are one of the most common reasons this part gets replaced. Over time, the valve body or its fittings can develop cracks or the internal seals can degrade, producing a slow drip that pools behind or under the refrigerator. If you've found water behind your fridge and traced it to the valve area, replacing the valve typically resolves it. When installing the new valve, tighten the water line fittings snugly but don't over-torque them — over-tightening can crack the fitting and create a new leak. Always check all connections for leaks before pushing the refrigerator back against the wall.
Should I flush the water lines after installing the new valve?
Yes. After the new valve is installed and the water supply is restored, run water through the dispenser for several minutes to purge trapped air from the lines — air pockets cause sputtering and inconsistent flow. Also discard the first two or three batches of ice the ice maker produces, since they may contain air, debris, or residual manufacturing material from the new valve. After that, water and ice should return to normal quality and flow.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ OE (Original Equipment) Quality ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
8544742 Dryer Blower Belt - Compatible with Whirlpool, Maytag, Kenmore, Amana Dryers
Product Description
Restore your dryer’s airflow with the replacement 8544742 Dryer Blower Belt. This high-quality replacement flat belt replaces the Whirlpool 8544742, designed for select Whirlpool, Maytag, Kenmore, Amana, and other brand dryers with a rear blower and top lint filter. Measuring approximately 23.9" long with 3 ribs and 2 grooves, this durable rubber belt connects the motor to the blower wheel, ensuring proper air circulation for efficient drying. It fixes issues like no heat, insufficient heat, long drying times, noisy operation (squeaking or rattling), or the dryer failing to start. Note: The belt is intentionally tight (may appear 1/2" to 1" short) and may require stretching during installation. Inspect the idler pulley (e.g., W10547292) and drum belt (e.g., 8547157) for wear, as they often fail together.
Replaces part numbers: WP8544742, 8544742, AP6013111, PS11746333.
Compatibility:
Compatible with models including but not limited to:
Whirlpool: WED8300SW0, WED8300SW1, WED8500SR0, WGD8300SW0, WGD8300SW1, MEDB850WL, MEDB850WB
Maytag: 7MMGDB850WL0, 7MMGDB850WL1, MEDB200VQ0, MEDB400VQ1, MEDB700VQ0, MEDB750YW0, MEDB800VB0, MEDB800VQ0, MEDB800VU0, MEDB850WB0
Kenmore: 110.67042600, 110.77086600, 110.87081601
Amana: NED5800DW0, YNED5800DW0
Verify your model number or contact support for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, Amana, Roper, Admiral, Jenn-Air, Estate, Inglis, KitchenAid, and other dryer models with rear blower and top lint filter.
🔥 Specifications: Flat blower belt, 23.9" long, 0.25" wide, 3 ribs, 2 grooves, made of durable rubber with reinforced construction for stretch resistance.
💰 Cost-Effective Alternative: Replacement belt offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires a Phillips screwdriver, 5/16" nut driver, pliers, and work gloves; typically installed in 30–60 minutes.
🛡️ Reliable Fixes: Resolves no heat, insufficient heat, long drying times, noisy operation, burning smell, or dryer failing to start.
Installation Notes:
Tools Needed: Phillips screwdriver, 5/16" nut driver, pliers, work gloves, flathead screwdriver.
Safety First: Unplug the dryer from the power source and, for gas dryers, shut off the gas valve before installation.
Handle with Care: Take photos during disassembly to note belt routing and component placement. Inspect the idler pulley and drum belt for wear, as they can cause blower belt failure. The belt may seem 1/2" to 1" short but is designed to be stretched for a tight fit.
Installation Steps: Remove the dryer’s top panel by releasing clips with a putty knife and unscrewing rear screws. Remove the front panel and bulkhead to access the blower assembly (consult your model’s manual for specific screws). Disconnect the old belt from the motor pulley and blower wheel, noting routing. Install the new belt on the blower wheel first, then stretch it onto the motor pulley using pliers or a screwdriver for leverage. Ensure the belt is seated in the grooves. Reassemble in reverse order and test the dryer with a short cycle to confirm proper operation and no leaks or noises. Note: A second person can help with stretching the tight belt. If the belt slips, check for oil on the pulleys or a worn idler pulley.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Get your dryer back to efficient, quiet performance today!
Add to cart now for a budget-friendly fix!
XPARTCO 5304517886 Refrigerator / Freezer LED Light Bulb – Compatible with Frigidaire, Electrolux, and Kenmore Refrigerators
Product Description
Restore bright, energy-efficient interior lighting with the XPARTCO 5304517886 Refrigerator / Freezer LED Light Bulb. This high-quality aftermarket replacement provides clear, long-lasting illumination inside the refrigerator and freezer compartments. A failed LED bulb can cause dim or no lighting, making it difficult to see stored food. Replacing it with this XPARTCO LED bulb ensures reliable brightness while consuming less energy than traditional bulbs.
Replaces Part Numbers
5304517886, 216846400, 216518101, 5304510893, 240588001, 241552807, 297114000, 5304498578, 5304509249, 5304520040, 216222700, 216518100, 216608600, 216988000, 216988100, 241552801, 3091423, 4929381, 5303091423, 5304495326, 7216988100, 7241552801, 7297114000, C000501867, F000092472, KEI D28M, KEID28M, KEL 2815, KEL2815, AC100-265V 3.8W, PD00051346, EAP12712277, AP6873911, PS12712277.
Compatibility
This replacement LED light bulb fits select Frigidaire, Electrolux, and Kenmore refrigerators.
Example compatible models include (but are not limited to):Frigidaire FFSS2615TS0, FGHC2331PF5Electrolux EI23CS55GS1Kenmore 253.7031321A
Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM brightness and fit
💡 Bright LED Illumination – Daylight 5000k, Clearly lights refrigerator and freezer interiors
⚡ Energy Efficient – Low power consumption with long service life
🛠️ Plug-and-Play Installation – Direct-fit bulb installs in minutes
🛡️ Fixes Common Issues – Solves dim lighting, flickering, or no interior light
📐 Product Specification
Part Number: 5304517886
Component Type: Refrigerator / Freezer LED Light Bulb
Light Type: LED
Color Temperature: Cool white, Daylight 5000k
Mounting: Twist-in or clip-in base (model dependent)
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: None (gloves recommended)
⚠️ Safety First: Unplug the refrigerator or turn off power before replacing the light bulb.
Steps:
Disconnect power to the refrigerator.
Remove the light cover, if applicable.
Remove the old LED bulb.
Install the new XPARTCO 5304517886 LED bulb securely.
Reinstall the cover and restore power.
Confirm proper illumination.
⏱️ Time Required: 5 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Brighten your refrigerator interior again — Add to Cart Now for a simple, cost-effective lighting upgrade!
Choice 4389102 Refrigerator Ice Level Control Board Replaces W11629974
The Choice 4389102 is a Choice-tier replacement ice level control board kit for Whirlpool refrigerators, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models with a vertical ice container in the freezer door. This kit uses an infrared beam between an emitter and receiver board to sense the level of ice in the ice bucket, signaling the ice maker to produce more ice when the level drops and to stop when the bucket is full.
Weighs approximately 0.23 lbs. Common causes of failure include electrical problems, general wear and tear, or damage from power surges or short circuits. Symptoms of a failing ice level control board include the ice maker not producing ice, the ice maker not stopping production when full, irregular or inconsistent ice production, or error codes related to the ice maker control system. It directly replaces W11629974, W10757851, 4389102, 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, W10193666, W10193840, W10290817, W11553040, W11553041, AP7205486, AWP45901, EAP16875489, PD00086112, PS16875489.
Quick Answer
The Choice 4389102 Refrigerator Ice Level Control Board fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators where the ice maker isn't producing ice, won't stop when full, or produces ice inconsistently. Emitter and receiver board kit — both boards need replacing together. Replaces W11629974, W10757851, 4389102, 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, W10193666, W10193840, W10290817, W11553040, W11553041, AP7205486, AWP45901, EAP16875489, PD00086112, PS16875489. Control boards are commonly misdiagnosed — check more commonly defective parts first, and use the LED status light blink pattern to confirm this board is actually at fault before replacing it.
What's In The Kit
Component
Function
Emitter Board
Sends an infrared beam across the ice bucket opening.
Receiver Board
Detects whether the beam is blocked by ice, signaling the ice maker to start or stop production.
Both boards need to be replaced together — this is a matched emitter/receiver pair, not two independently interchangeable parts.
What Is a Choice Part?
Choice parts are manufactured by a different supplier than the original appliance manufacturer, offering a dependable, cost-effective alternative to Genuine OEM parts. Unlike our OE parts, which come from the same supplier as the original manufacturer, Choice parts are made by an independent manufacturer to equivalent fit, form, and function specifications. This makes them a smart option when you want a reliable repair at a lower price point than Genuine OEM.
Common Problems This Kit Fixes
Ice maker not producing ice
Ice maker not stopping production when the bucket is full
Irregular or inconsistent ice production
Error codes related to the ice maker control system
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator ice level control board kit directly replaces the following OEM and cross-reference part numbers:
W11629974, W10757851, 4389102, 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, W10193666, W10193840, W10290817, W11553040, W11553041, AP7205486, AWP45901, EAP16875489, PD00086112, PS16875489
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This ice level control board kit is compatible with select Whirlpool refrigerators with a vertical ice container in the freezer door, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators built on the Whirlpool platform, including model numbers such as KSRI25FNWH01, ED5FHAXSQ01, KSRG25FVMS05, KSRU25FKWH03, KSRK25XLSS10, JBSS42E22L00, JBSS48E22L00, KBSD702MPS00, KBSD702MSS00, KBSD706MPS00, KBSD708MBS00, KBSD708MPS00, KBSD708MSS00, and Kenmore 106.57979700, 106.51552103, and 106.58169704.
Note: This kit is specifically for refrigerators where ice cubes dump directly into an ice bin located in the freezer door. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Choice-tier replacement ice level control board kit — includes matched emitter and receiver boards
Resolves "no ice production," "won't stop when full," and "inconsistent ice production" symptoms
Uses an infrared beam to detect ice level in the bucket
Direct drop-in replacement matching the original mounting and connections
Replaces W11629974, 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, TJ4389102R, W10193666, W10193840, W10290817, W10757851, W11553040, W11553041, AP7205486, AP5956767, AP3137510, PS557945, PS10064583, EAP16875489, PS16875489, AWP45901, and PD00086112
Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators
Manufactured by an independent supplier to equivalent fit, form, and function specifications
DIY-friendly repair, typically 10 to 20 minutes
Product Specifications
Part Number
4389102CM
OEM Part Number
W11629974
Part Type
Refrigerator Ice Level Control Board Kit (Emitter & Receiver)
Designation
Choice
Weight
Approx. 0.23 lbs
Function
Uses an infrared beam to sense ice level and signal the ice maker
Application
Refrigerators with vertical ice container in freezer door
Repair Difficulty
Easy — 10 to 20 minutes
Quantity
1 kit (emitter + receiver board)
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Confirm With The LED Test Before Replacing Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Before installing this kit, confirm the boards are actually at fault: with the refrigerator still plugged in, check the status light on the control board — it should blink twice, pause, then repeat during normal operation. With the freezer door open, hold down the flapper door on the left side to block the optics beam; the LED should light up and stay on with no blinks. If it continues to blink twice instead, the optics control board has failed. If there's no LED light at all, hold down the freezer light switch — the LED should flash every second while in harvest mode; if it doesn't light up, the board has failed. Once confirmed, unplug the refrigerator, locate the emitter and receiver boards near the ice bucket opening in the freezer door, and disconnect their wiring. Remove the mounting screws or clips securing the old boards and take them out. Install both new boards from this kit in the same positions, reconnect the wiring fully, and secure the mounting hardware. Restore power and monitor ice production over the next day or two to confirm normal operation. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My ice maker stopped making ice. Is this the part I need?
Possibly, but control boards are commonly misdiagnosed. Before replacing this board, check more commonly defective parts first — such as the water inlet valve, ice maker assembly itself, or the freezer temperature. If you've ruled those out and the other components are working properly, this control board is a reasonable next step.
How can I confirm this board has actually failed before replacing it?
Check the LED status light's blink pattern. During normal operation it should blink twice, pause, then repeat. With the freezer door open, hold down the flapper door on the left side to block the beam — the light should turn solid with no blinking. If it keeps blinking twice instead, or doesn't light up at all when it should be in harvest mode (checked by holding the freezer light switch), the board has failed.
Do I need to replace just the emitter or receiver, or both?
Both. This kit includes a matched emitter and receiver board, and both need to be replaced together as a pair rather than swapping just one side.
What does "Choice" mean for this part?
Choice parts are manufactured by an independent supplier, different from the appliance's original manufacturer, and built to equivalent fit, form, and function specifications. This gives you a dependable, lower-cost alternative to a Genuine OEM part, distinct from our OE parts, which are sourced from the same supplier as the original manufacturer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Choice Quality Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
