17438000001373 Washer Genuine OEM Water Level Sensor Assembly – Compatible with Midea, Insignia Washers
Product Description
Restore accurate water level detection and optimal washing performance with the 17438000001373 Washer Genuine OEM Water Level Sensor Assembly. This factory-original OEM sensor monitors water levels inside the washer and communicates with the control board to regulate fill cycles and ensure proper operation.
A faulty sensor can lead to overfilling, underfilling, or cycles not completing correctly. Replacing it with this Genuine OEM assembly ensures precise sensing, proper communication with the control system, and long-lasting reliability.
This part is manufactured to original factory specifications for dependable washer performance.
Replaces Part Numbers
17438000001373, 302421600037, PS18188481 (verify if needed)
Compatibility
This Genuine OEM washer water level sensor assembly fits select Midea, Insignia washers.
Common compatible models include (but are not limited to):
Midea MAD160S2801GPSFMUS13, MLV41N1AWW, MAD160S2801PS, CTW41N1AW, MLV41N1AWWC, CLAWI47W, ATLMW41, CTW45N1AW, CTW45N2AW, CTW45N2AW, CTW45N1AW
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🏭 Genuine OEM Part – Manufactured to original factory specifications
💧 Accurate Water Level Detection – Ensures proper fill and cycle control
⚙️ Fixes Common Issues – Resolves overfill, underfill, and sensor errors
🧩 Complete Sensor Assembly – Ready for direct installation
💪 Reliable Performance – Designed for long-term durability
⚠️ Symptoms
If your washer is experiencing any of the following issues, this part may need replacement:
💧 Washer overfilling or underfilling
⚠️ Incorrect water levels during cycles
🔄 Cycle not completing properly
🛑 Washer stopping mid-cycle
🚫 Continuous filling or no fill condition
Replacing this sensor assembly can restore proper water level control and washer operation.
📐 Product Specification
Part Number: 17438000001373
Component Type: Washer Water Level Sensor Assembly
Function: Detects water level and communicates with control board
Connection Type: Electrical connector + pressure sensing system
Application: Washer fill and cycle control system
OEM Status: Genuine OEM
🛠️ Installation Notes
Tools Needed: Phillips screwdriver
⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock.
Basic Steps:
Disconnect washer power.
Access the control panel or top panel.
Locate the water level sensor assembly.
Disconnect wiring and any attached pressure hose.
Remove mounting screws and remove the old sensor.
Install the new 17438000001373 Genuine OEM sensor.
Reconnect wiring, reassemble, and restore power.
Run a test cycle to confirm proper operation.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🏭 Genuine OEM Appliance Part
🚚 Free Shipping on All Orders
🔄 30-Day Return Policy
Restore factory-level washer performance and accurate water control — Add to Cart Now with confidence!
W11168740 - W11168743 Washer Water Valve Set for W11127357
Cold and Hot Washer Water Inlet Valve
Housing and Wire Harness not included.
Fits Kenmore, Maytag, Whirlpool top load washer models.
Replaces Part Number:W11168740, WPW10240949, W10240949, W10921514, AP6285450, PS12348073, W11127357, W11127357, W10678672, W10678676, W10849466, W10921581, W11085642, AP6261887, PS12347475, W11168743, WPW10240948, W10240948, W10921515, AP6327638, PS12348074.
Description: This Water Inlet Valve set is a replacement part for specific Kenmore, Maytag, Whirlpool washing machine models. It controls the flow of water into the washer tub at designated stages in the washing process. Water enters through the valve inlet and is distributed to internal components like the detergent dispenser, water pipes, and sump hoses. Common causes of a bad valve can include mineral scale buildup inhibiting proper flow regulation over time, or cracks and leaks from wear and tear on rubber gaskets and seals.
This is an aftermarket part that can be used as a replacement for the OEM part.
WPW10238100 Refrigerator Genuine OEM Water Valve
Replaces Part Numbers: WPW10238100, W10238100, W10498992, AP6017532, PS11750831.
Description: This Genuine OEM Part is a single water inlet valve designed for use in select Whirlpool refrigerator models. Its key function is to supply water to the refrigerator's ice maker and water dispenser. When energized, this valve releases water from the supply line into the ice mold. If the water valve develops a crack, it will need replacement. The valve accommodates two different sizes of tubing: the smaller inlet measures 1/4", and the larger inlet measures 5/16".
WB02X10983 Range Tube Venturi Rear
Replaces Part Numbers: WB02X10983, 1084649, AH951969, EA951969, AP3791850, PS951969.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WR57X30890 Refrigerator Genuine Water Valve
Water inlet valve assembly with Wire Harness
Replaces Part Numbers: WR57X30890, WR57X26569, WR57X30891, AP6891693, PS12727426.
Description: This water inlet valve is a Genuine OEM part for select GE Refrigerator models, responsible for controlling the flow of water into the refrigerator's ice maker and water dispenser. It is typically located at the back of the appliance, near the water supply line. The water inlet valve features quick-connect fittings for easy installation and ensures a reliable and steady supply of water for ice production and dispensing.
W11688995 Genuine OEM Whirlpool Washer Water Inlet Valve (Cold)
The W11688995 is a genuine Whirlpool OEM cold water inlet valve for Whirlpool-built front-load washers. Whirlpool's newer front-load platforms use two separate single-function valves instead of one combined hot/cold valve body — this cold-side valve handles only the cold water supply, while a matching hot-side valve (sold separately as W11688994) handles the hot side. When the control calls for a cold fill, it energizes this valve's solenoid coils to open the water path; when the correct level is reached, the valve closes again. If this valve fails to open, the washer won't take on cold water; if it fails to seal fully closed, water can trickle into the drum even when the washer isn't running.
Because this is a dedicated single-function valve, a failure here shows up in a very specific way: cold-only fills stop working or slow down dramatically, while hot-only fills (governed by the separate W11688994 valve) continue working normally. Whirlpool's own service guidance links this valve to F8 E1 and LO FL fill-related error codes. Common failure modes include mineral or sediment buildup that prevents the valve from sealing, a burned-out solenoid coil, or a worn internal diaphragm. It directly replaces W11036930, W11316256, W11486361, AP7218603, PS17216730, and EAP17216730. As a genuine OEM part, the W11688995 is manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The W11688995 Genuine OEM Whirlpool Washer Water Inlet Valve (Cold) fixes Whirlpool-built front-load washers where cold water won't fill, fills slowly, overfills, leaks into the drum when off, or throws an F8 E1 or LO FL error code. 120V, 50/60Hz, two-coil cold-only valve, 1/2" NPT threaded connections. Replaces W11036930, W11316256, W11486361, AP7218603, PS17216730, EAP17216730. This is the cold-side valve only — the companion hot-side valve is sold separately as W11688994.
Common Problems This Part Fixes
Washer won't fill with cold water while hot water fills normally
Cold water fills much more slowly than it used to
Washer overfills or takes on more water than the cycle calls for
Water trickling or leaking into the drum on the cold side when the washer is off
F8 E1 or LO FL error code displayed on the control panel
Cycle stalling at the fill step and never advancing to wash
Cold-wash or cold-rinse cycles specifically affected while warm/hot cycles run fine
Water pooling underneath or behind the washer near the cold supply connection
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer cold water inlet valve directly replaces the following OEM and cross-reference part numbers:
W11688995, W11316256, W11036930, W11486361, 4983050, PD00086086, FIX17216730, EAP17216730, OEM28874414, AP7218603, AWP46809, PS17216730.
W11486361 and W11316256 were earlier Whirlpool numbers for this same valve, with W11036930 preceding those. If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This cold water inlet valve is compatible with select Whirlpool-built front-load washers across the Whirlpool family of brands, including:
Whirlpool front-load washers — WFW series
Maytag front-load washers — MHW and MFW series (select Whirlpool-built models)
Amana front-load washers (select models)
Inglis front-load washers — IFW series (select models)
Select Kenmore front-load washers built on the Whirlpool platform
Verified model numbers include: 8TWFC6810LW0 (laundry center), IFW5900HW0, IFW5900HW1, IFW5900HW2, IFW5900HW3, IFW5900HW4, MFW7020RF0, MFW7020RU0, MFW7020RW0, MHW5630HC0, MHW5630HC1, MHW5630HC2, MHW5630HC3, MHW5630HW0, MHW5630HW1, MHW5630HW2, MHW5630MBK0, MHW6630HC0 through MHW6630HC3, MHW6630HW0 through MHW6630HW3, MHW6630MBK0, MHW8630HC0 through MHW8630HC3, MHW8630HW0 through MHW8630HW3, WFW560CHW0, WFW560CHW1, WFW560CHW2, WFW5620HW0 through WFW5620HW3, WFW6620HC0 through WFW6620HC2, WFW6620HW0, WFW6620HW1, WFW8620HC0 through WFW8620HC4, WFW8620HW0 through WFW8620HW4, WFW862CHC0, and WFW862CHC1.
Note — cold side only: This is the cold water valve. The matching hot water valve for these same washers is sold separately under part number W11688994. The two are not interchangeable — each is a dedicated single-function valve, and installing this cold valve in place of the hot valve (or vice versa) will not correctly control water temperature. If both valves need replacement, order both part numbers. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified solenoid, seal, and flow-rate design
Dedicated cold-only water inlet valve — two internal coils control flow to the cold supply
Resolves "won't fill with cold water," "fills slowly," "overfills," and "leaking into the drum" symptoms caused by valve failure
Commonly resolves F8 E1 and LO FL error codes
1/2" NPT threaded connections for standard supply line hookups
Direct drop-in replacement for W11036930, W11316256, and W11486361
Replaces W11036930, W11316256, W11486361, AP7218603, PS17216730, and EAP17216730
Compatible with Whirlpool, Maytag, Amana, Inglis, and select Kenmore front-load washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
W11688995
Part Type
Washer Water Inlet Valve — Cold
Condition
Genuine OEM
Brand
Whirlpool
Application
Front-Load Washers (Whirlpool-Built)
Voltage
120V
Frequency
50/60 Hz
Coils
2 (dedicated cold water function)
Connection
1/2 in. NPT threaded
Companion Part
W11688994 (hot water valve, sold separately)
Supersedes
W11036930, W11316256, W11486361
Quantity
1 valve
Compatible Brands
Whirlpool, Maytag, Amana, Inglis, select Kenmore
Installation Notes
⚠️ Shut Off Water Supply And Unplug Washer Before Starting — Have A Towel Ready Unplug the washer or shut off its circuit breaker, and shut off both the hot and cold water supply valves before beginning. Wear work gloves. Disconnect the cold water supply line from the back of the valve first — have a towel or shallow pan ready, since residual water will spill out. Remove the rear screws securing the top panel, then slide the panel back and lift it off to access the valve assembly from inside the cabinet. Photograph the wiring connections before disconnecting anything, since the hot and cold valves sit side by side and it's easy to cross a wire. Disconnect the electrical connector from the old cold valve, remove its mounting screw or bracket, and pull the valve free — leave the hot valve (W11688994) undisturbed if it isn't also being replaced. Install the new W11688995 in the same position, secure the mounting screw, and reconnect the electrical connector fully. Reattach the cold water supply line, tightening securely by hand plus a partial turn with pliers — avoid overtightening plastic threaded fittings. Reinstall the top panel, restore the water supply, and check the connection for leaks before restoring power. Run a short cycle set to a cold wash and confirm the tub fills at the normal rate with no leaking underneath or behind the washer. Tools needed: 1/4" nut driver or socket, T-20 Torx bit, pliers, towel or shallow pan, work gloves.
Frequently Asked Questions
Cold water won't fill but hot water works fine. Is this the right part?
Yes — that's exactly the symptom pattern this valve addresses. Because your washer uses two separate single-function valves rather than one combined valve, a fault on the cold side only affects cold fills while the hot valve (W11688994) keeps working independently. If cold-specific cycles are the ones failing, this cold valve is the correct part to replace.
Do I need to replace both the hot and cold valves at the same time?
Not necessarily. Since these are independent single-function valves, you only need to replace the one that has actually failed. If only cold fills are affected, replacing this W11688995 valve alone is sufficient. If both hot and cold fills are having problems, or if the valves are original and quite old, some people choose to replace both at once since they're already accessing the same area — but it's not required.
My washer shows an F8 E1 or LO FL error. Does that mean this valve is bad?
It's a strong indicator, but check the basics first. These codes generally mean the control didn't see water reach the expected level within its allotted fill time. Before replacing the valve, confirm the cold supply valve at the wall is fully open, check the inlet screen inside the valve port for sediment or debris, and make sure the cold fill hose isn't kinked. If those check out and cold water still won't fill properly, this valve is the likely cause.
Can I use this valve on the hot water side instead?
No. This is a dedicated cold-water valve, and the hot-water side uses a separate part number, W11688994. The two are built and calibrated for their specific supply line and are not interchangeable — installing the cold valve on the hot side (or vice versa) will not properly control water temperature during the cycle.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It includes the same two-coil solenoid design, seal, and flow-rate calibration as the cold water inlet valve originally installed in your front-load washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
AEC74337401 Dishwasher Water Inlet Guide - Compatible with LG Dishwashers
Product Description
Restore your dishwasher’s cleaning performance with the AEC74337401 Water Inlet Guide from Parts-O-Matic. This genuine OEM replacement guide directs water from the inlet valve into the dishwasher tub, ensuring proper water flow for wash and rinse cycles. Designed for LG dishwashers, it fixes issues like insufficient water, poor cleaning, or water inlet error codes.
Note: Includes one water inlet guide. Take photos of connections during disassembly and clean the inlet valve before installation.
Replaces part numbers: AEC74337401, AP6233501, PD00056036, PS12078211.
Compatibility:
Compatible with models including but not limited to:
Verify your model number or contact Parts-O-Matic support for assistance.
Key Features:
✅ Brand Compatibility: Fits select LG dishwasher models.
💧 Specifications: OEM plastic water inlet guide, designed for secure water flow and durability.
💰 Cost-Effective: OEM performance at a competitive price.
🛠️ Easy Installation: Requires a screwdriver, pliers, work gloves; typically installed in 20–30 minutes.
🛡️ Reliable Fixes: Resolves insufficient water, poor cleaning, or water inlet error codes.
Installation Notes:
Safety First: Unplug the dishwasher and turn off the water supply before installation to avoid shock or leaks.
Clean the inlet valve and hose to prevent clogs.
Access the inlet guide (inside or near the bottom of the dishwasher), disconnect the old guide, and install the new one, ensuring tight connections.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your dishwasher running smoothly today!
Add to cart now for a budget-friendly fix!
DC62-00266G Washer Water Inlet Valve
Cold Side Water Valve
Fits specific Samsung washer models.
Description: This Water Inlet Valve is a replacement part for specific Samsung washing machine models. It controls the flow of water into the washer during the fill cycles, ensuring the proper amount of water is delivered for each wash load. This valve opens and closes to allow water to enter the tub from the household water supply, making it a critical component for the washing machine's operation.
Replaces Part Numbers:DC62-00266G, AP5966622, PS11719652
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WH11X34740 Washer Genuine OEM Drain Pump Assembly – Compatible with GE & Hotpoint Washers
Product Description
Restore proper draining and reliable washer operation with the WH11X34740 Washer Drain Pump Assembly. This Genuine OEM replacement pump is responsible for removing water from the washer during drain and spin cycles. A failing drain pump can cause standing water, slow draining, loud grinding noises, or error codes. Replacing it with this Genuine OEM assembly helps ensure efficient water removal and dependable washing performance.
Replaces Part Numbers
WH23X25518, WH23X10038, WH23X25461, PD00079543, EAP16743374, AP7195487, PS16743374.
Compatibility
This Genuine OEM replacement washer drain pump assembly fits select GE and Hotpoint washers.
Example compatible models include (but are not limited to):
GE GTW465ASNWW, GTW335ASNWW
Hotpoint HTW240ASKWS
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Genuine OEM – Genuine OEM part
💧 Efficient Water Removal – Restores proper draining during cycles
🔇 Quiet Operation – Helps eliminate grinding or buzzing noises
💪 Durable Motor Construction – Designed for long service life
📐 Product Specification
Part Number: WH11X34740
Component Type: Washer Drain Pump Assembly
Voltage: 120V AC
Mounting: Direct-fit, bolt-on installation
Application: Washer drain and spin system
Quality Level: Genuine OEM
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver, pliers
⚠️ Safety First: Unplug the washer and shut off the water supply before servicing.
Basic Steps:
Disconnect washer power and water supply.
Access the drain pump from the bottom or rear of the washer.
Remove hoses and electrical connectors.
Remove mounting screws and take out the old pump.
Install the new WH11X34740 drain pump assembly.
Reconnect hoses and wiring, reassemble panels, and restore power.
Run a test cycle to confirm proper draining.
⏱️ Time Required: 25–35 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore proper washer draining and prevent water buildup — Add to Cart Now for a dependable, budget-friendly repair!
AJU34125552 Genuine OEM LG Refrigerator Water Inlet Valve
The AJU34125552 is a genuine LG OEM water inlet valve for LG refrigerators, supplying water to both the ice maker and the door water dispenser from a single valve assembly. Mounted at the rear of the refrigerator where the household water supply line connects, this valve opens on command from the control board to admit water for either feature, and closes again once the request is satisfied.
Common causes of failure include mineral and sediment buildup from hard water interfering with the internal solenoid over time, and general electrical wear. A failing valve typically shows up as the ice maker no longer producing ice, the water dispenser slowing down or stopping entirely, or both symptoms appearing together since one valve serves both functions.
Quick Answer
The AJU34125552 Genuine OEM LG Refrigerator Water Inlet Valve fixes LG refrigerators where the ice maker stopped making ice, the water dispenser isn't working, water flow is slow, or there's a leak near the valve at the back of the refrigerator. Supplies both the ice maker and dispenser from one valve.
Common Problems This Part Fixes
Ice maker has stopped making ice, or is producing less ice than usual
Water dispenser on the refrigerator door isn't working or has slowed down
Both the ice maker and water dispenser affected together
Slow water flow at the dispenser
Water leaking near the valve at the back of the refrigerator
No water or ice production at all
Valve failure following known hard water conditions at the home
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
AJU34125552, EAP10066440, FIX10066440, OEM17872815, PS10066440, AP5957602, ALG1274937, PD00053838.
We were not able to confirm additional cross-reference or superseding part numbers for this specific part number from reliable sources at the time this page was built, so none are listed here rather than guessed. If you have a cross-reference number for your appliance, contact our support team and we will verify compatibility before you order.
Compatibility
This water inlet valve is compatible with select LG refrigerators.
Note: A specific verified compatible model list was not available at the time this page was built. LG has used several visually similar water inlet valve part numbers across different refrigerator platforms, and parts that look identical can have small but important differences. Always verify your full model number before ordering. Contact our support team with your model number and we will confirm fitment before you purchase.
Key Features
Genuine LG OEM part — factory-specified solenoid design and flow-rate calibration
Single valve assembly supplies water to both the ice maker and door water dispenser
Resolves "ice maker not making ice," "dispenser not working," "slow water flow," and "leak near the valve" symptoms caused by valve failure
Genuine OEM replacement — guaranteed fit, materials, and performance
DIY-friendly repair — typically 15 to 30 minutes
Product Specifications
Part Number
AJU34125552
Part Type
Refrigerator Water Inlet Valve (Ice Maker + Dispenser)
Condition
Genuine OEM
Brand
LG
Location
Rear of refrigerator, at the household water line connection
Function
Supplies water to the ice maker and door water dispenser
Repair Difficulty
Easy — 15 to 30 minutes
Quantity
1 valve assembly
Compatible Brand
LG
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Store Perishable Food Separately Shut off the water supply and unplug the refrigerator before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Pull the refrigerator away from the wall for access, then locate the valve at the rear of the cabinet where the water supply line connects. Photograph the wiring harness and water line connections before disconnecting anything. On some installations, the wiring harness has been routed between water supply lines, which can make the connector difficult to reach and unplug — if this is the case, gently reposition or loosen a water line first rather than forcing the connector. Disconnect the water supply line from the old valve, disconnect the electrical connector, and remove the mounting screws holding the valve in place, then pull it free. Install the new AJU34125552 in the same position, secure the mounting screws, and reconnect the electrical connector fully — route the wiring the same way the original was routed, avoiding pinch points against the water lines if possible. Reattach the water supply line, tightening securely by hand plus a partial turn with pliers. Restore the water supply and check for leaks before restoring power. Push the refrigerator back into place and test both the ice maker and water dispenser over the following day to confirm normal operation. Tools needed: Phillips screwdriver, adjustable wrench or pliers, work gloves.
Frequently Asked Questions
My ice maker and dispenser both stopped working at the same time. Is that normal for a valve failure?
Yes, this is actually a very telling symptom. Because one valve assembly supplies water to both the ice maker and the door dispenser, a failure inside the valve itself commonly affects both functions simultaneously. If only one of the two has stopped working while the other functions normally, it's worth double-checking the water filter and supply line for a localized restriction before assuming the valve has failed, but a simultaneous failure of both points strongly toward this valve.
The wiring harness on my old valve was hard to reach. Is that normal?
It can be, depending on how the original installation routed the wiring. Some installations run the harness between two water supply lines, which can make the connector awkward to access and unplug. If you find yourself in this situation, gently repositioning or loosening a nearby water line first — rather than forcing the connector — makes it much easier to disconnect without damaging anything.
Could hard water be why my valve failed?
Yes, this is a common and well-documented cause. Mineral deposits from hard water can build up inside the valve over time and interfere with the internal solenoid's ability to open and close properly, eventually leading to failure. If you know your home has hard water and this valve has failed, it may be worth considering a water softener or more frequent filter changes to extend the life of the replacement.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It includes the same solenoid design and dual-function (ice maker and dispenser) configuration as the water inlet valve originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Choice WR57X10098 Refrigerator Water Valve
The Choice WR57X10098 is a Choice-brand replacement dual water inlet valve for GE refrigerators, and also fits select Hotpoint, Haier, Monogram, and Café models. Located in the left door on many GE refrigerator platforms, this single valve supplies water to both the ice maker and the door water dispenser. When either feature calls for water, this valve's solenoids open to admit it and close again once the request is satisfied — since one valve handles both jobs, a failure here can affect the ice maker, the dispenser, or both at once.
Common causes of failure include mineral and sediment buildup from the household water supply interfering with the valve's internal operation, and electrical faults either in the valve itself or in the refrigerator's control board that signals it. A failing dual water valve produces a recognizable set of symptoms: the door dispenser stops delivering water, the ice maker slows down or stops producing ice, water leaking around the valve area, or the valve failing to shut off water flow completely. It directly replaces AP5656686, 3033225, and PS6011774.
Quick Answer
The Choice WR57X10098 Refrigerator Water Valve fixes GE, Hotpoint, Haier, Monogram, and Café refrigerators where the door water dispenser stops working, the ice maker slows down or stops making ice, water is leaking near the valve, or the valve won't shut off completely. Located in the left door on many models. Replaces AP5656686, 3033225, PS6011774. Before replacing, rule out a clogged water filter and check the control board signal — both can produce identical symptoms to a failed valve.
Common Problems This Part Fixes
Water dispenser on the refrigerator door has stopped working
Ice maker has slowed down, stopped producing ice, or is malfunctioning intermittently
Both the ice maker and water dispenser affected at the same time
Water leaking or dripping around the valve area
Valve that won't shut off completely, causing continued water flow
Reduced water flow or pressure at the dispenser
What Is a Choice Part?
Choice parts are manufactured to meet or exceed OEM specifications for fit, materials, and performance, giving you reliable quality at a more affordable price than the genuine branded part. Choice is one of our trusted replacement part lines, offering the same function and durability you'd expect from an OEM component.
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator dual water valve directly replaces the following OEM and cross-reference part numbers:
WR57X10098, AP5656686, AGE29764, EAP6011774, PD00025096, PS6011774
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This dual water valve is compatible with select GE refrigerators, and also fits select Hotpoint, Haier, Monogram, and Café refrigerators built on the same GE platform.
Note: This is a dual-function valve serving both the ice maker and water dispenser from a single unit. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Choice-brand replacement dual water inlet valve — controls water flow to both the ice maker and door water dispenser
Resolves "dispenser not working," "ice maker slow or not making ice," "leak near the valve," and "won't shut off" symptoms caused by valve failure
Single central valve simplifies diagnosis and replacement compared to separate dedicated valves
Direct drop-in replacement — mounts to the original connection point
Replaces AP5656686, 3033225, and PS6011774
Compatible with GE, Hotpoint, Haier, Monogram, and Café refrigerators
Choice-brand replacement — built to meet or exceed OEM specifications
Product Specifications
Part Number
WR57X10098CM
OEM Part Number
WR57X10098
Part Type
Refrigerator Dual Water Inlet Valve (Ice Maker + Dispenser)
Condition
Choice Replacement
Brand
GE
Location
Left door on many GE refrigerator platforms
Function
Controls water flow to the ice maker and door water dispenser
Quantity
1 valve
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Danger — Authorized Service Part Required For Flammable Refrigerant Systems GE's own service guidance carries an explicit warning for this component: it is a manufacturer-authorized service part intended for use in refrigerator models that use a flammable refrigerant, such as R600a. Using an unauthorized or incorrectly rated service part in a unit that uses a flammable refrigerant could lead to a risk of fire or explosion. Before ordering or installing, confirm your refrigerator's refrigerant type and verify this part is correct for your specific model. If you have any doubt about your refrigerant type or the correct part for your unit, contact our support team with your model number before proceeding, or have a qualified appliance technician perform this repair.
⚠️ Shut Off Water Supply And Unplug Refrigerator Before Starting Disconnect power at the outlet, and shut off the water supply valve behind or below the refrigerator before beginning. Wear work gloves. Access is typically through the left door on models where this valve is door-mounted, or at the rear of the cabinet on others — check your model's service diagram. Have a towel or shallow pan ready, since residual water will spill out when you disconnect the line. Photograph the wiring and water line connections before disconnecting anything. Disconnect the water supply line from the old valve, disconnect the electrical connector, and remove the mounting screws holding it in place, then pull the valve free. Install the new WR57X10098 in the same position, secure the mounting screws, and reconnect the electrical connector fully. Reattach the water supply line, tightening securely by hand plus a partial turn with pliers — avoid overtightening plastic threaded fittings. Restore the water supply and check the connection for leaks before restoring power. Test both the ice maker and water dispenser over the next day to confirm normal operation. Tools needed: Phillips screwdriver, adjustable wrench or pliers, towel or shallow pan, work gloves.
Frequently Asked Questions
Why is there a fire/explosion warning on this part?
Some refrigerators use a flammable refrigerant, such as R600a (isobutane), instead of older non-flammable refrigerants. Electrical components like this water valve are near refrigerant lines and can be a source of ignition if a leak were ever present, which is why GE requires an authorized, correctly rated service part for these systems rather than a generic substitute. Confirming your model and refrigerant type before ordering is the appropriate precaution.
My dispenser stopped working but the ice maker still works. Is this the right part?
It's possible, but worth checking a couple of things first, since this valve serves both features from one unit. Confirm the water supply line isn't kinked, and check the inline water filter for a clog, since a blocked filter can starve the dispenser specifically while the ice maker keeps working depending on your model's plumbing. If the filter and supply line are clear and the dispenser still won't deliver water, the valve itself is the likely cause.
Could the problem actually be my water filter instead of this valve?
Yes, it's worth ruling out first. A clogged inline water filter can produce very similar symptoms to a failing valve — reduced dispenser flow, slow ice production, or both. Try replacing the water filter first if it's been a while since the last change; if symptoms persist afterward, the dual water valve is the more likely cause.
Is this a genuine OEM part?
This is a Choice-brand replacement part. Choice parts are manufactured to meet or exceed OEM specifications for fit, materials, and performance, giving you reliable quality at a more affordable price than the genuine branded part.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Choice Quality Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
