STORE CLOSURE NOTICE: Parts-O-Matic will be CLOSED Monday, August 31 & Tuesday, September 1, 2026, and will REOPEN Wednesday, September 2 at 9:00 AM. Online orders will be processed and shipped as usual. Store pickup will not be available during the closure.
WP4391960 Genuine OEM Whirlpool Dryer Heating Element
The WP4391960 is a Genuine OEM Whirlpool replacement dryer heating element used in older-generation Whirlpool-family electric dryers, including Whirlpool, Kenmore, Roper, Estate, Amana, and Admiral models — particularly the LE, EL, and early LG series dryers. The heating element is the primary heat source in an electric dryer — a nickel-chromium resistance coil wound around ceramic insulators inside a steel housing that generates heat when electrical current passes through it. When the coil burns through, the circuit opens and the dryer produces no heat. A shorted coil that contacts the housing is a fire hazard and requires immediate replacement.
This Genuine OEM part is manufactured by Whirlpool to factory specifications and is rated 5200W / 240V with 1/4" male spade terminals. Note: this element uses 1/4" terminals — different from the 5/16" terminals on the 279838 and WP3387747 elements. The wire kit and wire nuts (part 279457) are no longer included with this element and must be ordered separately if the original wires are damaged. It consolidates a very large list of older cross-reference numbers including 4391960, 2013, 279247, 279248, 279410, 279411, 696579, 696326, 697290, 786077, AP6009347, PS11742505, and dozens more. Installs in 20–45 minutes with basic hand tools.
Quick Answer
The WP4391960 Genuine OEM Whirlpool Dryer Heating Element fixes older Whirlpool-family electric dryers (LE, EL, early LG series) that produce no heat, run too hot, or take too long to dry. 5200W / 240V, 1/4" male spade terminals (not 5/16"). Wire kit 279457 sold separately — not included. Genuine OEM. Replaces 4391960, 2013, 279247, 279248, 279410, 279411, 696579, AP6009347, PS11742505, and many more. Compatible with older Whirlpool, Kenmore, Roper, Estate, Amana, and Admiral electric dryers.
Common Problems This Part Fixes
Dryer produces no heat — element coil burned through
Dryer takes much longer than normal to dry a load
Dryer tumbles normally but produces no heat at all during the cycle
Dryer overheating or running continuously — coil shorted to housing (fire hazard)
Visible break, burn spot, or collapsed section in the heating coil
Burning smell during operation — arcing at a weak point in the coil
Dryer trips the circuit breaker when the heat cycle is selected
Replaces Part Numbers
This heating element directly replaces the following OEM and cross-reference part numbers:
WP4391960, 4391960, 2013, 279218, 279247, 279248, 279410, 279411, 279455, 279598, 279698, 3367, 337378, 337430, 339655, 340468, 348775, 349542, 349543, 349545, 349546, 660933, 660982, 685182, 685942, 689805, 689980, 690241, 690983, 691724, 692758, 693061, 693062, 693297, 693298, 693299, 693300, 695182, 696324, 696326, 696579, 697290, 786077, 8218, 8700-599, WP4391960VP, AWP47415, DE177, DE193, DE195, DE698, EAP11742505, ER4391960, AP6009347, PD00002385, PS11742505, TJ90DE698.
Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This heating element is compatible with select older-generation electric dryers only from the following brands:
Whirlpool electric dryers — LE, EL, and early LG/LER series (older models)
Kenmore / Sears electric dryers — older 110-series models (Whirlpool-built)
Roper electric dryers
Estate electric dryers
Amana electric dryers (older models)
Admiral electric dryers
Important: The WP4391960 uses 1/4" male spade terminals — different from the 5/16" terminals on the 279838 and WP3387747 elements. Verify your existing element's terminal size before ordering. Also: the wire kit (part 279457) is no longer included with this element — order separately if needed. Always verify your exact model number before ordering.
Key Features
Genuine OEM part manufactured by Whirlpool to factory specifications — guaranteed fit and performance
Primary heat source for older Whirlpool-family electric dryers — nickel-chromium resistance coil
Rated 5200W / 240V — correct electrical specifications for compatible older-generation dryer models
1/4" male spade terminals — different from the 5/16" terminals on 279838 and WP3387747; verify before ordering
Consolidates over 50 older cross-reference part numbers into a single current OEM part
Wire kit (part 279457) no longer included — order separately if original wires are damaged
Do not touch the element coil with bare hands — skin oils cause premature burnout
Compatible with Whirlpool LE/EL series, Kenmore older 110-series, Roper, Estate, Amana, and Admiral electric dryers
DIY repair — installs in 20–45 minutes with basic hand tools
Product Specifications
Part Number
WP4391960
Part Type
Dryer Heating Element (Electric)
Condition
Genuine OEM
Application
Older-Generation Electric Dryers (LE, EL, early LG/LER series)
Wattage
5200W
Voltage
240V AC
Coil Material
Nickel-chromium resistance wire
Terminals
1/4" male spade terminals (not 5/16")
Wire Kit
Not included — order part 279457 separately if needed
Handling Note
Do not touch coil wire — skin oils cause premature burnout
Compatible Brands
Whirlpool, Kenmore, Roper, Estate, Amana, Admiral
Installation Notes
⚠️ Unplug Dryer Before Starting — Do Not Touch the Coil Wire Disconnect power before beginning. Remove the back panel of the dryer to access the heating element housing. On older LE-series Whirlpool models, the element housing is mounted at the lower rear of the dryer and may have a top panel over the housing that must be removed before the element can be freed. Photograph all wiring before disconnecting. Note: the element's wires and wire nuts (279457 kit) are no longer included with the WP4391960 — if your existing wires are in good condition, reuse them; if damaged, order 279457 separately before beginning. Do not touch the new element's coil wire at any point — skin oils create hot spots that will prematurely burn the element. Disconnect the old element wires, unscrew the housing mounting screws, and remove the old element. Install the new WP4391960 in the same orientation, reconnect wiring, reinstall the housing, and restore power. Run a test heat cycle to confirm normal operation. Tools needed: Phillips screwdriver, 1/4" nut driver.
Frequently Asked Questions
What is the difference between WP4391960 and 279838 or WP3387747?
All three are Genuine OEM Whirlpool dryer heating elements, but for different generations of dryers and with different terminal sizes. The WP4391960 (5200W, 1/4" spade terminals) is for older-generation Whirlpool LE/EL series and early Kenmore dryers. The 279838 (5400W, 5/16" terminals) is for standard-capacity mid-generation Whirlpool-family dryers. The WP3387747 (5200W, 5/16" terminals) is for newer higher-capacity models like the Duet, Cabrio, HE, and GEW/GEQ series. The terminal size difference is important — the WP4391960 uses 1/4" spade terminals, while the other two use 5/16" terminals. Always verify your model number before ordering.
Why does this element have so many cross-reference part numbers?
The WP4391960 consolidates a very large number of older Whirlpool heating element part numbers that were used across many different model runs over the years. As Whirlpool refined the design and standardized parts across its lineup, it consolidated these older numbers into the current WP4391960. If your dryer's parts diagram shows any of the hundreds of older cross-reference numbers listed above, the WP4391960 is the correct current replacement.
Why is the wire kit (279457) not included?
Whirlpool changed the packaging of this part during a production revision and no longer includes the wire kit and wire nuts that were previously bundled with the element. If your existing element wires are in good condition, you can reuse them — carefully transfer each wire to the corresponding terminal on the new element, maintaining the original connections. If any wires are burned, melted, or damaged, order part 279457 (wire kit) separately before beginning the repair.
How do I test if the heating element has failed?
Unplug the dryer and disconnect the element terminals. Set your multimeter to continuity or resistance mode. A working 5200W/240V element shows a resistance reading — typically around 9–12 ohms. No continuity (open circuit) means the coil has burned through. Also test each terminal individually to the metal housing frame — if continuity exists between a terminal and the housing, the element is shorted to ground and must be replaced immediately as a fire hazard.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same heating element installed in compatible older-generation Whirlpool, Kenmore, Roper, and related brand electric dryers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DG64-00472B Gas Range / Stove Burner Knob
Fits Specific Samsung Range / Cooktop models.
Replaces Part Numbers: DG64-00472B, DG64-00347B, 3555006, AP5949297, PS9865173.
Description: The Knob Assembly is a replacement Part designed for adjusting the temperature of specific Samsung surface burner models. It accepts a D-shaped shaft and is sold individually.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO 7733P410-60 Surface Burner Knob (Replaces WP7733P410-60)
Product Overview
The XPARTCO 7733P410-60 Surface Burner Knob (Replaces WP7733P410-60) is designed to control the heat level of your range’s surface burners. This durable replacement knob restores precise control and a clean, finished look to your cooktop.
Quick Answer
If your stove knob is cracked, loose, missing, or difficult to turn, the 7733P410-60 burner knob is likely worn. Replacing it restores proper control of burner heat settings.
Replaces Part Numbers
Replaces OEM part number: WP7733P410-60, 7733P410-60, 74007733, WP7733P410-60VP, EAP11744702, AWP48511, PD00004326, AP6011505, PS11744702.
Compatibility
This surface burner knob is compatible with select Whirlpool, Maytag, Amana, and other compatible ranges.
Whirlpool Ranges
Maytag Ranges
Amana Ranges
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Broken or cracked knob
Knob slipping or not turning properly
Missing control knob
Difficulty adjusting burner heat
Key Features
Restores precise burner control
Easy push-on installation
High-quality aftermarket replacement
Durable construction for daily use
Product Specifications
Part Number: 7733P410-60
Part Type: Surface Burner Knob
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Range Cooktop Control
Troubleshooting Guide
Knob spins freely → Worn internal insert
Cannot adjust flame → Damaged knob
Knob falls off → Cracked or loose fit
When Should You Replace This Knob?
Replace this knob if it is cracked, loose, missing, or no longer controls burner settings accurately.
Installation Notes
⚠️ Ensure the appliance is off. Pull the old knob straight off the control shaft and push the new knob firmly into place.
Related Parts
Surface Burner Valve
Igniter Switch
Control Panel Overlay
Frequently Asked Questions
Will this knob fit my range?This knob fits many Whirlpool and compatible models. Always verify your model number.
Is installation difficult?No, most knobs are push-on and can be replaced without tools.
What are signs of a bad knob?Cracks, slipping, or inability to control heat settings.
Is this OEM or aftermarket?This is a high-quality aftermarket replacement part.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
(4 Pack) XPATC5 Furnace & Air Conditioner Control Circuit Board 5 Amp Fuse – Universal HVAC Replacement
Product Description
Protect your HVAC system’s control board with the XPATC5 Furnace & Air Conditioner Control Circuit Board 5 Amp Fuse (4 Pack). These high-quality aftermarket blade fuses are designed to safeguard furnace and air conditioner control boards from electrical overloads and short circuits. A blown 5-amp fuse can cause the HVAC system to stop working entirely. Replacing it with reliable XPATC5 fuses helps restore operation while protecting sensitive electronic components.
XPATC5 fuses are commonly used in residential HVAC systems and are ideal to keep on hand for quick repairs.
Replaces Part Numbers
ATC-5, ATO-5, 5 Amp HVAC Control Fuse, Furnace Control Board Fuse, Air Conditioner 5A Fuse
Compatibility
This 5 amp HVAC control board fuse is compatible with many furnace and air conditioner systems from manufacturers including Carrier, Trane, Lennox, Goodman, Rheem, York, and others that use standard ATC/ATO 5-amp blade fuses.
Always verify fuse amperage and type before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Built to OEM-equivalent electrical specifications
⚡ 5 Amp Rating – Protects HVAC control boards from overloads
🧯 Critical Safety Component – Helps prevent damage to circuit boards
📦 Convenient 4-Pack – Keep spares on hand for future service
💰 Cost-Effective Solution – Affordable alternative to OEM HVAC fuses
📐 Product Specification
Part Number: XPATC5
Component Type: HVAC Control Board Fuse
Amperage Rating: 5 Amp
Voltage Rating: 32V
Fuse Style: ATC / ATO Blade Fuse
Quantity: 4-Pack
Application: Furnace & air conditioner control boards
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Needle-nose pliers or fuse puller
⚠️ Safety First: Always turn off power to the HVAC system before replacing fuses to avoid electrical shock or equipment damage.
Basic Steps:
Shut off power to the furnace or air conditioner.
Open the control board access panel.
Locate the blown 5-amp fuse.
Remove and replace it with a new XPATC5 fuse.
Restore power and test system operation.
⏱️ Time Required: 5 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket HVAC Parts
🔄 30-Day Return Policy
Protect your HVAC system and keep it running — Add to Cart Now for a reliable, budget-friendly solution!
S48D21 8" Range Surface Element
Product Title
Aftermarket S48D21 8" Range Surface Element - Compatible with Whirlpool, Maytag, Kenmore, Jenn-Air, Amana Electric Ranges
Product Description
Revive your electric range’s cooking performance with the Aftermarket S48D21 8" Range Surface Element from Parts-O-Matic. This high-quality aftermarket burner element replaces the original S48D21, delivering 2100 watts at 240V with a 4-turn coil design for efficient and even heating. Ideal for select Whirlpool, Maytag, Kenmore, Jenn-Air, Amana, and other brand electric ranges, it addresses issues like uneven heating, slow warm-up, or non-functional burners. Enjoy free shipping on all orders at Parts-O-Matic!
Key Features:
✅ Broad Compatibility: Fits select Whirlpool, Maytag, Kenmore, Jenn-Air, Amana, and other electric range models.
🔥 Efficient Heating: 8" diameter, 4-turn coil delivers 2100 watts at 240V for consistent, even cooking.
💰 Cost-Effective Alternative: Aftermarket part offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Plug-in design with Y-style bracket; requires no tools and takes 5–10 minutes to install.
🛡️ Fixes Common Issues: Resolves uneven heating, slow warm-up, or burners that fail to heat.
Compatibility:
Compatible with models including but not limited to:
Whirlpool: RF110AXSQ0, RF262LXSB, RF365PXKW0
Maytag: MER4110AAH, MER4120AAQ
Kenmore: 629.4297, 629.60003600 (pre-2004 models)
Jenn-Air: JES9750AAB
Amana: AER5511AAQ
Replaces part numbers: TJ90SP21MA, 14215226, 1938283, 309917, 403782, 404110, 406000, 814154, ERS48D21, SE302, SP21MA, SU214, SU302, TS4D8221, TS4D8221PB, TS4D8221SR, TS4D8221WI, YSP21MA, AP4503257.
Verify compatibility with your appliance brand and model number, please contact Parts-O-Matic support for assistance.
Installation Notes:
Tools Needed: None for standard installation; a flathead screwdriver may help for stubborn connections.
Safety First: Unplug the range before installation to avoid electrical shock.
Steps: Remove the old burner element by gently pulling it from the receptacle, align the Y-style bracket of the new S48D21 element, and plug it into the socket. Ensure the element sits flat in the drip pan. If the burner is not level, adjust the connection bolts to ensure they are parallel and push down gently. Installation takes 5–10 minutes. Note: A slight burning smell during first use is normal due to a protective coating; this will dissipate after 15–20 minutes.
Download our installation guide or watch our YouTube tutorial for step-by-step instructions.
Shop Parts-O-Matic for high-quality aftermarket appliance parts with free shipping on all orders and a 30-day return policy. Restore your range’s cooking performance today!
Add to cart now for an affordable fix with free shipping on your entire order!
(4 Pack) 74009592CM Burner Control Knob
Black plastic burner knob
Fits Specific Maytag, Jenn Air, Whirlpool ranges
Replaces Part Numbers: WP74009592, 74009592, 1032643, 71003477, AP6011140, PS11744334.
Description: This Top Burner Control Knob is a replacement part for specific Whirlpool ranges and cooktop models. This part allows for precise control over the heat level of the stove's burners, enabling users to adjust the flame size for various cooking needs. Constructed from durable materials, the knob is designed to withstand the rigors of daily use, providing a reliable interface for setting and maintaining the desired cooking temperature.
This is an aftermarket part that can be used as a replacement for the OEM part.
ERP 74007733 Surface Burner Knob
1/4" stem length,
6 o'clock flat,
0.256
Replaces Part Numbers:WP7733P410-60, 7733P410-60, 74007733, AP6011505, PS11744702, WP7733P410-60VP
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO AEZ73293801 Cooktop Burner Control Knob – Compatible with LG & Kenmore Cooktops
Product Description
Restore smooth, precise burner control with the XPARTCO AEZ73293801 Cooktop Burner Control Knob. This high-quality aftermarket replacement knob fits securely onto the burner control shaft, allowing accurate flame adjustment and dependable operation. A cracked, loose, or missing knob can make it difficult to control heat or safely operate your cooktop. Replacing it with this durable XPARTCO knob restores proper functionality and everyday cooking convenience.
XPARTCO is a trusted aftermarket brand offering appliance replacement parts built to OEM-equivalent specifications at a cost-effective price.
Replaces Part Numbers
AEZ73293801, EBZ60710601, 2025031, PD00055975, EAP3639420, AH3639420, EA3639420, AP5594929, PS3639420.
Compatibility
This replacement cooktop burner control knob fits select LG and Kenmore (LG-manufactured) gas cooktops and ranges.
Commonly used on surface burner controls.
Always verify your appliance’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches original fit and appearance
🎛️ Smooth Flame Control – Restores accurate burner adjustment
🧩 Direct-Fit Design – Push-on installation for secure seating
💪 Durable Plastic Construction – Built for daily kitchen use
💰 Cost-Effective Repair – Affordable alternative to OEM knobs
📐 Product Specification
Part Number: AEZ73293801
Component Type: Cooktop Burner Control Knob
Material: High-strength molded plastic
Color: Black (OEM-style)
Mounting: Push-on / shaft-fit
Application: Gas cooktop or range burner control
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: None
⚠️ Safety First: Ensure the cooktop or range is turned off and cool before installing the knob.
Basic Steps:
Turn the burner control to the OFF position.
Align the new XPARTCO AEZ73293801 knob with the control shaft.
Press firmly until fully seated.
Rotate to confirm smooth operation.
⏱️ Time Required: Under 2 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore safe, precise burner control in seconds — Add to Cart Now for a quick, budget-friendly fix!
XPARTCO 3387747 Dryer Heating Element Replaces WP3387747
The XPARTCO 3387747 is an aftermarket replacement heating element assembly for Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and Roper electric dryers. This element is the source of virtually all the heat in the dryer: current flows through a nickel-chromium coil, which glows and radiates heat as the blower pushes air across it and into the drum. Everything downstream — the drum temperature, the drying time, the final dampness of your clothes — depends on this coil working correctly.
Rated 5400W at 240V, with two 5/16" terminals for a direct connection. The nickel-chromium coil is rated at roughly 85% nickel-chromium content for effective, heat-and-abrasion-resistant heating, and it's mounted in high-temperature ceramic insulators that hold it firmly in the frame so it won't loosen or shift under the vibration of a running dryer. Over years of use, the coil itself typically fails with a visible break somewhere along its length — a section simply burns through and the circuit opens, cutting off heat entirely. It directly replaces WP3387747, WP3387747VP, W11045584, W11344457, 80003, 525502, AP6008281, AP2947033, PS344597, PS11741416, EAP11741416, FIX11741416, AWP47520, and PD00002365.
Quick Answer
The XPARTCO 3387747 Dryer Heating Element fixes Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and Roper electric dryers with no heat, insufficient heat, or drying times that have gotten noticeably longer. 5400W, 240V, two 5/16" terminals. Replaces WP3387747, WP3387747VP, W11045584, W11344457, 80003, 525502, AP6008281, AP2947033, PS344597, PS11741416, EAP11741416, FIX11741416, AWP47520, PD00002365. If the dryer has no heat at all, check the thermal fuse first — it's a cheaper, faster fix, and a blown fuse produces the same "no heat" symptom as a failed element.
Common Problems This Part Fixes
Dryer runs a full cycle but produces no heat at all
Dryer produces some heat, but not enough to dry clothes properly
Drying times that have gotten noticeably longer than they used to
Clothes coming out cold or barely warm at the end of a cycle
Visible break or burned-through section in the heating coil
Element that tests as an open circuit (no continuity) with a multimeter
Dryer that heats inconsistently, cycling on and off unexpectedly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer heating element directly replaces the following OEM and cross-reference part numbers:
WP3387747, WP3387747VP, W11045584, W11344457, 80003, 525502, AP6008281, AP2947033, PS344597, PS11741416, EAP11741416, FIX11741416, AWP47520, PD00002365
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This heating element is compatible with select Whirlpool electric dryers, and also fits select Kenmore, Maytag, KitchenAid, Amana, and Roper dryers built on the same platform, including model numbers such as:
GEW9200LW0, GEW9200LW1, GEW9250PL0, GEW9250PW0, GEW9250PW1
GEQ9800PW1, GEQ9800PW2
MEDB835DW4, MEDC700VW0
WED5100HW1, WED5500XW1, WED5700AC1, WED6120HW1, WED6620HW1, WED8300SW2
MED5500FW1, MED6230HW1, MED6230RHW1
Kenmore 110.82822101
Note: Always verify your full model number before ordering, since Whirlpool uses several different heating elements across its dryer lineup. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement heating element assembly — generates the heat that dries clothes
Resolves "no heat," "insufficient heat," and "drying takes too long" symptoms caused by a burned-through coil
Nickel-chromium coil (approx. 85% Ni-Cr content) for effective, heat-and-abrasion-resistant heating
High-temperature ceramic insulators hold the coil firmly in the frame against vibration
Rated 5400W at 240V
Two 5/16" terminals for a direct connection
Approximately 10"L x 6"W x 1"H
Direct drop-in replacement — no modification required
Replaces WP3387747VP, W11045584, W11344457, 80003, 525502, AP6008281, AP2947033, PS344597, PS11741416, EAP11741416, FIX11741416, AWP47520, and PD00002365
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and Roper electric dryers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
3387747
OEM Part Number
WP3387747
Part Type
Dryer Heating Element Assembly
Condition
Aftermarket Replacement
Wattage
5400 W
Voltage
240V
Terminals
2 (5/16")
Coil Material
Nickel-chromium (approx. 85% Ni-Cr)
Insulators
High-temperature ceramic
Dimensions
Approx. 10"L x 6"W x 1"H
Repair Difficulty
Medium — basic electrical skills and dryer panel disassembly required
Quantity
1 heating element assembly
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper
Installation Notes
⚠️ Unplug Dryer Before Starting — Test Continuity Before Assuming It's The Element Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel or the front, depending on your model, to reach the heater duct/blower housing area where the element is mounted. Before removing anything, test the old element with a multimeter set to continuity — a healthy element reads continuous end to end, while a failed one (with a visible break in the coil) reads open. Photograph the wiring before disconnecting anything. Disconnect the two wire terminals from the old element, remove the mounting screws or clips holding it in the duct housing, and pull it free. Install the new 3387747 assembly in the same position, reconnect the two wire terminals, and secure the mounting hardware. While the dryer is open, this is a good time to fully clean the exhaust vent ducting from the lint trap to the outside vent hood — restricted airflow is a major cause of heating element failure, and a fresh element installed into a clogged system will likely fail again prematurely. Reassemble the panel, restore power, and run a test cycle to confirm the dryer is heating normally. Tools needed: 1/4" nut driver, 5/16" wrench, Phillips screwdriver, multimeter, work gloves.
Frequently Asked Questions
My dryer has no heat at all. Should I replace the element first, or check something else?
Check the thermal fuse first. A blown thermal fuse produces the exact same "no heat at all" symptom as a failed heating element, and it's a much cheaper, faster part to test and replace. Whirlpool's own service guidance recommends checking the thermal fuse before replacing the element. If the fuse tests good and the dryer still has no heat, the element itself is the next thing to test and likely replace.
How can I tell if the element has actually failed?
The most reliable way is a continuity test with a multimeter — set it to continuity mode, disconnect the element's wires, and touch a probe to each terminal. A healthy element shows continuity (a complete circuit); a failed one shows open (no continuity), which usually corresponds to a visible break or burned-through section somewhere in the coil if you inspect it closely.
Why does the listing recommend cleaning the vent duct during this repair?
Restricted airflow from a lint-clogged exhaust duct is one of the most common root causes of heating element failure — when air can't move through the system properly, heat builds up around the element well beyond its designed operating range, accelerating wear and often leading directly to a burned-through coil. Since you'll already have the dryer open for this repair, cleaning the full duct run from the lint trap to the outside vent hood is a good use of the same trip and helps the new element last.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the 5400W/240V electrical rating, nickel-chromium coil composition, ceramic insulator mounting, and terminal configuration of the original WP3387747 heating element used in compatible Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and Roper dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
ERP DA47-00244Q Refrigerator Defrost Heater
Replaces Part Numbers:DA47-00244Q, AP5587899, PS4140528.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
DA32-00029X Genuine OEM Samsung Refrigerator Temperature Sensor
The DA32-00029X is a Genuine OEM Samsung replacement refrigerator temperature sensor compatible with select Samsung side-by-side and French door refrigerators, as well as related Kenmore Samsung-built models. This NTC (negative temperature coefficient) thermistor continuously monitors the temperature inside the refrigerator and sends resistance-based readings to the electronic control board, which uses this data to cycle the compressor, fans, and defrost heaters to maintain accurate, consistent temperatures throughout the appliance. As the thermistor heats up or cools down, its electrical resistance changes predictably, allowing the control board to calculate the exact temperature in real time.
When this sensor fails — whether shorted, open, or providing drifted/inaccurate readings — the refrigerator may run too cold or too warm, cycle excessively, fail to maintain set temperatures, run continuously, ice up the evaporator, or display temperature-related fault codes. As a Genuine OEM part manufactured by Samsung to factory specifications, the DA32-00029X is rated approximately 13.2 kΩ at 20°C (68°F) when functioning correctly. It is one of the variants in the DA32-00029 sensor family — Samsung uses different production-run variants (M, N, Q, U, X) across model generations, all functionally similar but with different wire harness connectors. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The DA32-00029X Genuine OEM Samsung Refrigerator Temperature Sensor fixes Samsung side-by-side and French door refrigerators that run too cold or warm, cycle excessively, freeze up the evaporator, fail to maintain set temperatures, or display temperature-related fault codes. Genuine OEM Samsung NTC thermistor — approximately 13.2 kΩ at 20°C (68°F). One of the DA32-00029 series variants (M, N, Q, U, X) — confirm your specific variant by connector style before ordering.
Common Problems This Part Fixes
Refrigerator running too cold or too warm — sensor not accurately reporting temperature to the control board
Inconsistent temperatures — fluctuating cooling that can't maintain set point
Excessive or frequent defrost cycles — control board misreading temperature
Refrigerator running continuously without cycling off
Heavy frost or ice buildup on the evaporator coils caused by erratic defrost timing
Food spoilage from temperature instability
Temperature-related error codes displayed on the control panel
Multimeter test shows 0 ohms (shorted) or infinite resistance (open) instead of the expected ~13.2 kΩ at room temperature
Replaces Part Numbers
This temperature sensor directly replaces the following Samsung part number:
DA32-00029X, EAP16732853, FIX16732853, ASM30292, AP7188139, OEM21564426, PD00090960, PS16732853.
The DA32-00029X is part of the broader DA32-00029 sensor family — variants M, N, Q, U, and X are functionally similar Samsung temperature sensors used across different model generations, but with different wire harness connector configurations. They are not automatically interchangeable — match the variant suffix (or the connector style) to your refrigerator. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This temperature sensor is compatible with select Samsung side-by-side and French door refrigerators, including:
Samsung side-by-side refrigerators (select models in the RS-series with the matching DA32-00029X connector)
Samsung 3-door French door refrigerators in 17.5 cu. ft., 19.5 cu. ft., and related capacities (Black Stainless Steel, Black, White, and Stainless Look finishes)
Samsung 4-door French door refrigerators (select RF-series models with the matching DA32-00029X connector)
Kenmore / Sears refrigerators (select Samsung-built models)
Important — Match the Variant to Your Refrigerator: Samsung uses several variants of the DA32-00029 temperature sensor (M, N, Q, U, X) across different model generations. The sensors are similar in function and resistance value, but the wire harness connectors differ — using the wrong variant means the connector won't fit. Before ordering, verify your refrigerator's parts diagram specifies DA32-00029X (not DA32-00029M, N, Q, or U), or visually confirm the connector on your old sensor matches the new one. Contact our support team with your model number if you're unsure.
Key Features
Genuine OEM part manufactured by Samsung to factory specifications — guaranteed fit and performance
NTC (negative temperature coefficient) thermistor — resistance changes predictably with temperature, allowing precise temperature monitoring
Sends real-time temperature data to the control board to regulate compressor cycling, fan operation, and defrost timing
Approximately 13.2 kΩ of resistance at 20°C (68°F) when functioning correctly
Wire harness with connector attached for direct plug-in installation (variant-specific connector — see compatibility note)
One of the DA32-00029 series variants (M, N, Q, U, X) — match to your refrigerator's variant suffix
Compatible with select Samsung side-by-side, 3-door French door, and 4-door French door refrigerators, plus Kenmore Samsung-built models
Installs in 20–30 minutes with basic hand tools
Product Specifications
Part Number
DA32-00029X
Part Type
Refrigerator Temperature Sensor (NTC Thermistor)
Condition
Genuine OEM
Application
Side-by-Side and French Door Refrigerators (Samsung platform)
Sensor Type
NTC (Negative Temperature Coefficient)
Resistance at 20°C
Approximately 13.2 kΩ (68°F)
Variant Family
DA32-00029 (M, N, Q, U, X variants)
Compatible Brands
Samsung, Kenmore (Samsung-built)
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. Samsung refrigerators typically have multiple temperature sensors — fresh food compartment, freezer compartment, and evaporator/defrost sensors — confirm which sensor location matches your symptom and parts diagram before starting. The fresh food and freezer sensors are typically clipped to a wall or shelf bracket inside each compartment, while evaporator/defrost sensors are mounted near the evaporator coils behind a rear access panel. Take a photo of the sensor mounting and wire routing before removing. Disconnect the sensor's wire connector (gently — the molex connectors can be fragile) and release the sensor from its mounting clip. Inspect the connector for corrosion or heat discoloration on the wires — discoloration indicates prior overheating in that area. Install the new DA32-00029X sensor in the same position, reseat the connector firmly, and secure the mounting clip. Restore power, allow several hours for the refrigerator to return to its set temperature, and confirm stable temperature operation before reloading with food. Tools needed: Phillips screwdriver, multimeter (for testing), work gloves.
Frequently Asked Questions
How do I know if the temperature sensor has failed?
Unplug the refrigerator, disconnect the sensor's connector, and set your multimeter to resistance mode. At room temperature (around 20°C/68°F), a working NTC thermistor should read approximately 13.2 kΩ. If the sensor reads 0 ohms, it has shorted internally. If it reads infinite resistance (open circuit, often shown as "OL" on the multimeter), the sensor has failed open. Either reading confirms the sensor needs replacement. If the sensor reads close to 13.2 kΩ at room temperature but the refrigerator still has temperature problems, the control board or another sensor in the system may be the actual cause.
My Samsung refrigerator has multiple temperature sensors — which one do I replace?
Samsung refrigerators typically use multiple temperature sensors: one in the fresh food compartment, one in the freezer compartment, and one near the evaporator coils (often called the defrost sensor). The DA32-00029X is used as the fresh food or freezer compartment temperature sensor on select Samsung models. Confirm the exact mounting location for your specific symptom (e.g., fresh food too warm vs. freezer too cold) and your refrigerator's parts diagram before ordering. The evaporator/defrost sensor is typically a different part number, so don't assume the DA32-00029X covers all sensor positions.
What is the difference between DA32-00029X and DA32-00029M, N, Q, or U?
These are all variants of the same Samsung refrigerator temperature sensor family. They share the same NTC thermistor design and resistance characteristics (approximately 13.2 kΩ at 20°C), but use different wire harness connector configurations to match different refrigerator generations and wiring designs. The X variant is used on select Samsung side-by-side and French door models, while M, N, Q, and U variants appear on other model groups. They are not automatically interchangeable — match the variant to your refrigerator's exact part diagram, or visually compare connector styles before ordering.
My Samsung fridge is icing up the back wall — could this be the sensor?
Possibly, yes. If the temperature sensor near the evaporator (the defrost sensor) is misreporting temperature, the control board may not trigger the defrost cycle when needed, allowing ice to build up on the evaporator coils. Eventually this ice migrates to the rear interior wall as a frozen sheet. If your symptom is back-wall icing combined with poor cooling, the evaporator sensor is a likely cause — but confirm whether the DA32-00029X is the evaporator sensor on your specific model, or whether your model uses a different part number for that position. Always verify against your model's parts diagram.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Samsung to factory specifications. It is the exact same temperature sensor installed in compatible Samsung side-by-side and French door refrigerators (and Kenmore Samsung-built models) from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
