WPW10455261 Dishwasher Genuine OEM Pump and Motor Assembly
Fits specific Whirlpool, Maytag, Kenmore Dishwasher models
Description: This Dishwasher Pump & Motor is an OEM replacement part for specific Whirlpool dishwasher models. As the main component for water circulation, it contains both the water pump and motor required to power it.
Replaces Part Numbers: WPW10455261, W10455261, 2312159, W10500284, AP6021679, PS11755005.
California Residents only
WARNING: California’s Proposition 65
WR60X10185 Genuine OEM GE Refrigerator Evaporator Fan Motor
The WR60X10185 is a genuine GE OEM evaporator fan motor located in the freezer compartment, for GE, Hotpoint, and select Kenmore, Haier, Monogram, and Café refrigerators. This motor pulls air across the evaporator coils to strip heat from it, then circulates that cold air through the freezer and, via ducting, to the fresh food compartment. This particular motor does not include a thermistor — it ships as a fan motor with a 4-wire harness on a 6-pin connector, with two of those six pin slots left empty. If your refrigerator's original connector has a white thermistor wire in it, or a separate connector for a freezer light, this is not the correct motor for your unit.
Rated 9.75V DC, 3.25W. A fan motor generally has a long service life, but it can burn out quickly if debris or ice buildup obstructs the blade and forces the motor to work against resistance it wasn't designed for. Common symptoms of a failing motor include unusual noise from the freezer, a fresh food compartment that's warmer than it should be while the freezer stays reasonably cold, frost or ice accumulating around the fan or coil, and a refrigerator that runs constantly trying to compensate for lost circulation. It directly replaces AP3875639, 1170107, 197D2039P007, 197D2039P008, PS1019114, EAP1019114, WR23X10346, WR23X10350, WR23X10353, WR23X10355, WR23X10364, WR23X10404, WR23X10405, WR23X10406, WR60X10043, WR60X10059, WR60X10068, WR60X10083, WR60X10084, WR60X10099, WR60X10149, WR60X10152, WR60X10154, and WR60X10157.
Quick Answer
The WR60X10185 Genuine OEM GE Refrigerator Evaporator Fan Motor fixes GE, Hotpoint, and select Kenmore refrigerators where the fresh food section runs warm while the freezer stays cold, there's unusual noise from the freezer, or frost is building up around the coil. 9.75V DC, 3.25W, 4-wire harness on a 6-pin connector (2 pins empty). Does NOT include a thermistor. Replaces AP3875639, 1170107, 197D2039P007, 197D2039P008, PS1019114, WR23X10353, WR23X10355, WR23X10364, WR60X10043, WR60X10154, and others listed below. If your old connector has a white thermistor wire, you need WR60X10074 instead; if it has a light connector, you need WR23X10467.
Common Problems This Part Fixes
Fresh food compartment running warmer than normal while the freezer stays reasonably cold
Unusual noise — humming, buzzing, or grinding — coming from the freezer
Freezer not cooling properly, which in turn affects compressor performance
Frost or ice buildup accumulating around the fan blade or evaporator coil
Refrigerator running continuously as it struggles to maintain temperature
Fan motor that has burned out due to an obstruction preventing the blade from turning
Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10185, WR60X10043, WR60X10059, WR60X10068, WR60X10083, WR60X10084, WR60X10099, WR60X10149, WR60X10152, WR60X10154, WR60X10157, WR23X10346, WR23X10350, WR23X10353, WR23X10355, WR23X10364, WR23X10404, WR23X10405, WR23X10406, 197D2039P013, 1170107, UDQT26GE4, AP3875639, AGE29155, PD00000986, PS1019114, EAP1019114
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE and Hotpoint refrigerators, and also fits select Kenmore, Haier, Monogram, and Café refrigerators built on the GE platform.
Note — check your connector before ordering: GE uses several different evaporator fan motor variants that look nearly identical, and choosing the wrong one means the connector or function won't match your refrigerator. This WR60X10185 motor has no thermistor and a plain 4-wire harness with 2 empty slots on its 6-pin connector. If your old motor's connector has a white thermistor wire in it, you need WR60X10074 instead (harness with integrated thermistor). If your old connector instead has a dedicated light connector, you need WR23X10467. This part is also a separate motor from our WR60X10318 listing, which is a side-by-side platform assembly with its own integrated thermistor and a longer harness. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which motor fits your refrigerator.
Key Features
Genuine GE OEM part — factory-specified motor and blade design
Pulls air across the evaporator coils and circulates it through the freezer and fresh food compartments
Resolves "fresh food warm while freezer stays cold," "unusual noise," and "frost buildup" symptoms caused by fan motor failure
Rated 9.75V DC, 3.25W
Includes the fan motor and 4-wire harness assembly (does not include thermistor)
Direct drop-in replacement matching the original mounting and blade fitment
Replaces a wide range of legacy WR23X and WR60X part numbers plus AP3875639 and PS1019114
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WR60X10185
Part Type
Refrigerator Evaporator Fan Motor
Condition
Genuine OEM
Brand
GE
Location
Freezer compartment
Voltage
9.75V DC
Wattage
3.25 W
Harness
4-wire, 6-pin connector (2 pins unused)
Includes Thermistor
No
Quantity
1 fan motor
Compatible Brands
GE, Hotpoint, Kenmore, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Check Your Connector Type First Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Before removing the old motor, look closely at its connector: confirm it's a plain 4-wire harness with no thermistor wire and no separate light connector, matching this replacement. Access is through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator coil and fan assembly. If there's significant frost or ice around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new WR60X10185 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
How do I know if I need this motor or the one with the thermistor?
Look directly at your old motor's electrical connector before ordering. This WR60X10185 motor has a plain 4-wire harness on a 6-pin plug, with two of the six pin positions left empty — there's no thermistor wire involved. If your connector instead has a white thermistor wire running into it, you'll need WR60X10074, which includes an integrated thermistor and is not interchangeable with this motor. If your connector has a separate plug specifically for a freezer light, you'll need WR23X10467 instead.
My fresh food section is warm but the freezer seems fine. Is this the right part?
Yes, this is a very common and telling symptom pattern. The freezer sits right next to the evaporator coil and can stay reasonably cold through proximity even with weakening air circulation, but the fresh food compartment depends entirely on the fan pushing cold air through the ducting to reach it. When the fan motor fails or slows down, the fresh food side is usually the first and most noticeably affected area, and GE's own guidance confirms that a fresh-food-warm/freezer-fine pattern points to this fan.
Why would a fan motor "burn out quickly" instead of just wearing out slowly?
While this motor generally has a long service life, it can fail rapidly if something obstructs the fan blade from turning — commonly built-up frost or ice, or occasionally debris. When the blade can't turn freely, the motor works against resistance it wasn't designed for, which accelerates internal wear and can burn it out much faster than normal aging would. Clearing ice from around the fan before or during replacement helps prevent stressing the new motor the same way.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original 9.75V, 3.25W motor design, blade fitment, and 4-wire harness configuration of the fan motor originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WR60X10307 Refrigerator Evaporator Fan Motor
The XPARTCO WR60X10307 is an aftermarket replacement evaporator fan motor designed to circulate cold air throughout the refrigerator and freezer compartments. Restore efficient cooling with the replacement XPARTCO WR60X10307 Refrigerator Evaporator Fan Motor. This evaporator fan motor is designed for select GE, Hotpoint, RCA, and Kenmore refrigerators, circulating air over the evaporator coils to maintain consistent temperatures in both refrigerator and freezer compartments. It includes a 6-pin harness with a 2-wire thermistor, addressing issues like noisy operation, inconsistent temperatures, or frost buildup, offering a cost-effective alternative to OEM parts.
When the fan motor fails, cold air cannot circulate effectively, leading to warm refrigerator sections, frost buildup, or noisy operation. Replacing the evaporator fan motor restores airflow, improves cooling efficiency, and helps prevent food spoilage.
Quick Answer
The XPARTCO WR60X10307 Evaporator Fan Motor fixes refrigerators that are not cooling properly, have warm fresh food sections, or make unusual buzzing or grinding noises. It restores proper air circulation inside the unit.
Common Problems This Part Fixes
Refrigerator not cooling properly
Freezer cold but fridge section warm
Loud buzzing, humming, or grinding noise
Frost buildup around evaporator coils
Inconsistent temperature between compartments
No airflow from vents
Replaces Part Numbers
This evaporator fan motor replaces the following part numbers:
WR60X10307, WR60X10099, WR60X10224, WR60X30370, 197D4968G009, FDQT26GE6, AGE29301, PD00001317, EAP2364950, AP4438809, 1550741, PS2364950
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select refrigerators from the following brands:
GE refrigerators
Hotpoint refrigerators
Other compatible models using WR60X10307
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Circulates cold air across evaporator coils
Restores proper airflow and temperature balance
Offers OEM-equivalent performance at a lower price.
Reduces noise from worn or failing fan motors
Improves overall cooling efficiency
Direct replacement for WR60X10307 motor, evaporator fan motor, 9.75V DC, 3.25W, includes 6-pin harness with 2-wire thermistor.
Product Specifications
Part Number
XPARTCO WR60X10307
Part Type
Evaporator Fan Motor
Application
Refrigerator / Freezer
Condition
Aftermarket Replacement
Function / Specs
Air Circulation, 9.75V DC, 3.25W
Compatible Brands
GE, Hotpoint
Installation Notes
⚠️ Safety First — Disconnect Power Before Service Unplug the refrigerator before servicing. Access the evaporator fan by removing the rear freezer panel. Disconnect wiring harness and mounting screws, replace the fan motor, and reassemble. Ensure the fan spins freely before restoring power.
Frequently Asked Questions
What does the evaporator fan motor do?
It circulates cold air from the evaporator coils throughout the refrigerator and freezer compartments to maintain even cooling.
Will this fix a warm refrigerator section?
Yes, a failed evaporator fan motor is a common cause of warm fridge sections while the freezer remains cold.
Is this an OEM part?
This is a high-quality aftermarket replacement built to OEM-equivalent standards for reliable performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in high-quality replacement parts. Fast shipping from our U.S. warehouse and expert support available to help verify compatibility.
✓ Fast US Shipping ✓ Quality Parts ✓ Compatibility Support ✓ Secure Checkout
W11452196 Refrigerator Evaporator Fan Motor – Replacement for Whirlpool, Maytag, KitchenAid, Amana
Product Overview
This Evaporator Fan Motor is a replacement part for specific Whirlpool refrigerator models. It circulates cool air within the refrigerator compartment to maintain even temperatures throughout. The evaporator motor works in conjunction with the cooling system, drawing in warm air and distributing cold air via its high-efficiency fan blades. Causes of a bad evaporator motor can include normal wear over many operating hours, damages from dust or debris buildup, and failures in the motor winding or power control mechanisms.
Replaces Part Numbers
This motor replaces part numbers W11452196, W11032800, WPW10514110, W10514110, W10728094, W10466226, W10561029, W11374554, AP6987262, PS16217991.
It is engineered to match the performance and fit of the original OEM part for reliable operation.
Compatible Brands
Compatible with a wide range of Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, and Kenmore refrigerators that use this style of evaporator fan motor. Fits many bottom freezer, French door, and side-by-side models.
Fixes the Following Issues
Refrigerator or freezer not cooling properly
Inconsistent or uneven airflow
Loud or non-functioning fan motor
Ice buildup due to poor air circulation
Why Buy from Parts‑O‑Matic
Cost-effective aftermarket solution
Fast and free U.S. shipping
Trusted by appliance repair technicians and DIYers
Simple installation and responsive customer support
XPARTCO W10464673 Refrigerator Evaporator Fan Motor Replaces WPW10464673
The XPARTCO W10464673 is an aftermarket replacement refrigerator evaporator fan motor compatible with select Whirlpool, KitchenAid, Maytag, Kenmore, and Ikea bottom-freezer and French door refrigerators. The evaporator fan motor is located inside the freezer compartment and circulates cold air from the evaporator coils throughout both the freezer and fresh food sections. Without the evaporator fan running, cold air cannot be distributed — even if the compressor and evaporator are working correctly, both compartments will gradually warm up. A failed evaporator fan motor is one of the most common causes of a refrigerator that runs but does not cool.
Rated 115V, 60Hz with a 2-pin connector, this motor features a 14mm shaft length, 3mm shaft diameter, and approximately 13cm (5.1") of wire lead. It is constructed from ABS plastic housing with a metal motor core. It directly replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167, and EAP11755167. Compatible models include KitchenAid KFFS and KRFF series, Maytag MFB and MFF series, and several Kenmore 106/596-series models. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The XPARTCO W10464673 Refrigerator Evaporator Fan Motor fixes refrigerators where both compartments are too warm, the refrigerator runs but doesn't cool, or there is unusual noise from inside the freezer. 115V/60Hz, 2-pin connector, 14mm shaft, 3mm shaft diameter, 13cm leads. ABS/metal construction. Compatible with KitchenAid KFFS/KRFF, Maytag MFB/MFF, Whirlpool, and Kenmore 106/596-series. Replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167.
Common Problems This Part Fixes
Both refrigerator and freezer compartments too warm — evaporator fan not circulating cold air
Refrigerator running continuously but not cooling — compressor on but no air circulation
Freezer section cold but fresh food section warm — fan not moving air between compartments
Unusual buzzing, squealing, or grinding noise coming from inside the freezer
No airflow felt inside the refrigerator or freezer when the compressor is running
Fan blade visible inside the freezer but not spinning when the compressor runs
Ice buildup on the evaporator coils causing the fan blade to stop
Replaces Part Numbers
This evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WPW10464673, W10464673, 3020513, AWP50481, EAP11755167, PD00030978, AP6021839, PS11755167, FDQC16WP2A.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select refrigerators from the following brands and series:
KitchenAid refrigerators — KFFS20 and KRFF300 series (KFFS20EYMS02, KFFS20EYBL02, KFFS20EYBL04, KRFF300EBL00, KRFF300EBS00 and related models)
Maytag refrigerators — MFB2055 and MFF2055 series (MFB2055YEB01, MFB2055YEB02, MFB2055YEM01, MFB2055YEM02, MFB2055YEW02, MFF2055DRE00, MFF2055YEB02, MFF2055YEW00, MFW2055FRH00, MFB2055FRW00 and related models)
Whirlpool refrigerators (select bottom-freezer and French door models)
Kenmore / Sears refrigerators — 106 series and 596 series (10673002510, 10673002511, 10673003510, 10673003511, 59673002510, 59673003510, 59673003511, 59673009510, 10679472411, 10679473411 and related models)
Ikea refrigerators (select models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Circulates cold air from the evaporator coils throughout the freezer and fresh food compartments — essential for maintaining set temperatures in both sections
115V, 60Hz — correct electrical specifications for compatible models
2-pin connector — direct plug-in replacement on compatible models
Shaft: 14mm length, 3mm diameter — matches original motor shaft dimensions for fan blade compatibility
Wire lead length: approximately 13cm (5.1 inches)
ABS plastic housing with metal motor core — durable and designed for continuous freezer-temperature operation
Replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167, and FDQC16WP2A
Compatible with KitchenAid KFFS/KRFF, Maytag MFB/MFF, Kenmore 106/596, Whirlpool, and Ikea refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
Part Number
W10464673
OEM Part Number
WPW10464673
Part Type
Refrigerator Evaporator Fan Motor
Condition
Aftermarket Replacement
Application
Bottom-Freezer and French Door Refrigerators
Voltage
115V AC
Frequency
60 Hz
Connector
2-pin plug
Shaft Length
14mm (0.55 inches)
Shaft Diameter
3mm (0.12 inches)
Wire Lead Length
Approximately 13cm (5.1 inches)
Material
ABS plastic housing / Metal motor core
Compatible Brands
Whirlpool, KitchenAid, Maytag, Kenmore, Ikea
Installation Notes
⚠️ Unplug Refrigerator and Shut Off Water Before Starting Unplug the refrigerator and shut off the water supply before beginning. Remove all food and shelving from the freezer compartment. On most compatible models, the evaporator fan is located behind the freezer back panel. Remove the screws securing the freezer back panel and carefully slide it out to expose the evaporator coils and fan assembly. If ice has built up on the fan or coils, use a hair dryer to melt it before attempting to remove the fan — do not force a frozen fan free. Disconnect the 2-pin wire connector from the old motor. Remove the fan blade by pulling it straight off the motor shaft, then unscrew the motor mounting brackets and remove the old motor. Install the new W10464673 motor in the same position, secure the mounting brackets, press the fan blade back onto the shaft, and reconnect the 2-pin connector. Reinstall the freezer back panel, restore power and water, and verify the fan runs when the compressor starts. Tools needed: Phillips screwdriver, hair dryer (if coils are iced), work gloves.
Frequently Asked Questions
What does the evaporator fan motor do?
The evaporator fan motor drives a fan blade inside the freezer compartment that draws air across the evaporator coils — the cold coils remove heat from the air, and the fan distributes the chilled air throughout both the freezer and fresh food sections via a duct system. Without the evaporator fan running, the evaporator coils still get cold and the compressor still runs, but no cold air is circulated. This causes both compartments to gradually warm up even though the refrigeration system itself may be functioning correctly. A failed evaporator fan motor is one of the most common and most frequently misdiagnosed causes of poor refrigerator cooling.
How do I know if the evaporator fan motor has failed?
Open the freezer door and press the door switch (the small button or tab that tells the refrigerator the door is closed) — this should start the evaporator fan if the compressor is running. If you hear no fan noise and feel no airflow from inside the freezer with the compressor running, the fan motor has likely failed. You can also remove the freezer back panel and physically check whether the fan blade spins freely by hand — if it is stuck or wobbles, inspect for ice buildup or a seized motor bearing. If the blade spins freely but the motor does not run when powered, the motor has burned out.
What is the difference between W10464673 and WPW10464673?
These are the same evaporator fan motor. WPW10464673 is the updated Whirlpool OEM part number that superseded the original W10464673. The 3020513 is also a cross-reference for this same motor. This aftermarket replacement is compatible with all of these numbers.
My freezer is cold but my fridge is warm — could it be the evaporator fan?
Yes — this is a classic evaporator fan failure symptom. When the fan motor fails partially, the freezer may still receive some cold air passively from the evaporator, but not enough air is circulated to reach the fresh food section through the duct system. A failed evaporator fan is frequently the cause of this hot-fridge-cold-freezer pattern. Check the fan as described above — if it is not spinning, replacing the W10464673 motor will restore cooling to both compartments.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from ABS plastic and metal to match the electrical specifications and shaft dimensions of the original W10464673 evaporator fan motor.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 4681JB1029A Refrigerator Evaporator Fan Motor – Compatible with LG and Kenmore Refrigerators
Product Description
Keep your refrigerator cooling evenly with the XPARTCO 4681JB1029A Refrigerator Evaporator Fan Motor. This Fan Motor is a replacement component for specific LG, Kenmore refrigerator models. It operates the circulation fan located in the back of the refrigerator compartment, distributing cool air evenly throughout. The motor enables constant airflow across shelves and compartments to maintain consistent temperatures and humidity levels. Causes of a bad fan motor include failure of bearings or windings due to prolonged use.
Replaces Part Numbers
4681JB1029A, EAU60694507, 1330410, 4681JB1010C, 4681JB1017A, 4681JB1017D, 4681JB1027A, EAU61762902, EAU41921810, PD00037982, EAP3523328, AH3523328, EA3523328, AP4438221, PS3523328.
Compatibility
This replacement evaporator fan motor fits select LG and Kenmore refrigerators.
Example compatible models include (but are not limited to): LG LFX25960ST, LG LFX28968ST, and Kenmore 795.77543600.
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Built to meet OEM airflow and reliability standards
❄️ Efficient Air Circulation – Distributes cold air evenly through refrigerator and freezer
💰 Affordable Solution – Quality replacement at a lower cost than OEM parts
🛠️ DIY Installation – Simple plug-in wiring connector for quick installation
🛡️ Fixes Common Issues – Solves frost buildup, uneven cooling, or noisy fan problems
📐 Product Specification
Part Number: 4681JB1029A
Component Type: Refrigerator Evaporator Fan Motor
Material: Metal motor housing with balanced plastic fan blade
Mounting: Direct-fit replacement in freezer evaporator compartment
Operating Conditions: Designed for continuous low-temperature operation
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the refrigerator before performing repairs to prevent electrical shock.
Steps:
Unplug the refrigerator.
Remove shelves and freezer rear panel to access the evaporator area.
Disconnect the wiring harness and mounting screws on the old fan motor.
Install the new XPARTCO 4681JB1029A motor, reconnect wiring, and secure the panel.
Restore power and verify quiet, consistent airflow.
⏱️ Time Required: 20–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore efficient, even cooling — Add to Cart Now for a reliable, budget-friendly repair!
EXPHV13 Microwave High Voltage Diode (Rectifier)
Replaces Part Numbers: W11256462, W10492278, W10886077, WPW10492276, WPW10575765, AP6784287, PS12584264, WPW10687786, W10687786, 4449228, AP6023790, PS11757136, 5304470521, AP4396425, PS2353199, WB27X10597, AH239740, EA239740, AP3192533, PS239740.
CL04-12A=500mA CL04-12 12kV
Description: This Diode Assembly is a replacement part for specific microwave models. It plays a crucial role in converting alternating current (AC) to direct current (DC), which is essential for the microwave’s high-voltage functions, including powering the magnetron to generate microwave energy. Over time, diodes can fail due to electrical surges, excessive heat, or wear and tear. A faulty diode assembly can lead to inefficient or non-functional microwave operation, impacting its ability to heat food properly.
EXPHV13 Microwave High Voltage Diode – OEM-Quality Replacement
Replace your faulty diode with the EXPHV13, a high-quality, aftermarket microwave high voltage diode rated for 12,000V / 500mA. It restores proper heating function and is compatible with many leading microwave brands.
Key Features:
✅ Rated for 12kV, 500mA
✅ Direct replacement for most standard microwaves
✅ Solves issues like no heat, humming, or tripped breakers
✅ Easy-to-install universal fit for GE, LG, Whirlpool, Panasonic, etc.
⚠️ Always disconnect power before installation. For compatibility questions, contact us—we’re happy to help!
📦 Part Number: EXPHV13💯 30-Day Money Back Guarantee
XPARTCO EAU61524007 Refrigerator Evaporator Fan Motor
13V, 1.5 W, 0.118A.
1-1/2" shaft.
Has quick disconnect.
Fits specific LG Refrigerator Models.
Description: This ERP EAU61524007 Refrigerator Evaporator Fan Motor is designed for reliable and efficient cooling performance. It features the EAU61524007 model, providing optimal airflow and preserving freshness in your refrigerator. Upgrade your appliance with this high-quality fan motor and enjoy the benefits of improved cooling and longer-lasting food.
Replaces Part Numbers:EAU61524007, AP5950081, EAU60694510, PS10058947
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO XPIBE1740 Microwave Light Bulb 40W Replaces 8206232A, WB25X10030
The XPARTCO XPIBE1740 is an aftermarket replacement 40-watt T8 appliance light bulb compatible with a wide range of microwaves, range hoods, refrigerators, ovens, and other kitchen appliances from GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, Hotpoint, and more. It uses the standard E17 intermediate screw base found on most over-the-range and built-in microwave interior lights, range hood lights, and select appliance bulb sockets. With a clear T8 glass envelope, warm white 2800K color temperature, and 280-lumen output, it matches the brightness and look of the original OEM bulbs it replaces.
Specifications: 40W, 125V (AC 110-130V/60Hz), E17 intermediate screw base, T8 shape (1" diameter × 2-3/8" length), 280 lumens, warm white (~2800K), dimmable (compatible with microwave HIGH/LOW light settings), 1000-hour rated life, working temperature High Temp Resistance 300℃. It directly replaces 8206232A, 8206232, 8189961, 8204855, 8205422, 1890433, 0053437, 05200136, 05200137, AP4512653, R0712011, W10321375, W10598935, WB36X10003, WB25X10029, WB25X10030, WB25X10030-24PK, 261201500480, 3015548, 6912W1Z004B, AP5809052, PS2376034, and PS8767095. Installs in under 5 minutes — no tools required for the bulb itself.
Quick Answer
The XPARTCO XPIBE1740 Microwave Light Bulb (40W) replaces burned-out interior microwave lights, range hood lights, and select appliance bulbs across GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, and Hotpoint. T8 shape, 40W, 125V, E17 intermediate screw base. 1" diameter × 2-3/8" length. 280 lumens warm white (~2800K). Dimmable. 1000-hour life. Replaces 8206232A, 8206232, 8189961, 8204855, 8205422, 1890433, AP4512653, R0712011, W10321375, W10598935, WB36X10003, WB25X10029, WB25X10030, WB25X10030-24PK, 6912W1Z004B, AP5809052, PS2376034, PS8767095. Make sure your appliance uses an E17 intermediate base — not E26 standard, E12 candelabra, or E14 European.
Common Problems This Part Fixes
Microwave interior light not working — bulb burned out
Range hood light bulb burned out — under-cabinet area no longer illuminates when cooking
Over-the-range microwave under-cabinet light not working
Bulb flickering or dimming inconsistently — filament starting to fail
Bulb visibly burned out, broken, or rattling when shaken (broken filament)
Microwave light works only intermittently — bulb on the verge of failure
Replacement after long service life — most appliance bulbs last about 2,000 hours
Replaces Part Numbers
This 40W appliance light bulb directly replaces the following OEM and cross-reference part numbers from multiple brands:
8206232A, 8206443, 8183993, 0053437, 05200136, 05200137, 14209237, 14210453, 14210811, 14218311, 14218312, 14218318, 1890433, 2635-0004, 2635-0005, 2665-0003, 4158344, 4158365, 4158432, 4164062, 4166665, 4174608, 4338831, 4359625, 4393681, 53001372, 53422, 53437, 56001071, 56001089, 57001073, 7-47000, 7-47001, 747000, 747001, 8189961, 8204855, 8205422, 8205586, 8206232, R0712013, R0712015, R0713503, R9900310, W10321375, W10598935, Y0053422, Y0053437, Y05200136, Y05200137, Y747000, Y747001, AWP39609, PD00003046, AH2376034, EA2376034, AP4512653, PS2376034, WB25X10030, 261201500480, 3015548, AGE22225 PD00034740, AP5809052, PS8767095, 26QBP4093.
If your bulb part number isn't listed above, check that the base is E17 intermediate and the bulb is 40W — most appliance bulbs in this category are interchangeable. Contact our support team if you need confirmation.
Compatibility
This 40W E17 appliance light bulb is compatible with a wide range of microwaves, range hoods, refrigerators, and ovens using E17 intermediate base sockets, including:
GE over-the-range and countertop microwaves (interior lights)
GE Profile, Café, and Monogram microwaves and range hoods
Whirlpool microwaves and range hoods (over-the-range models)
KitchenAid microwaves (built-in and over-the-range)
Maytag microwaves (select models)
Amana microwaves (select models)
LG over-the-range microwaves
Frigidaire microwaves and range hoods (select models)
Kenmore / Sears microwaves (multi-brand-built models)
Hotpoint microwaves and range hoods
Corningware microwaves (select models)
Also fits select refrigerator interior light sockets, oven lights, and lava lamps using the same E17 base
Important — Check Your Base Type: This bulb uses an E17 intermediate screw base. It will NOT fit appliances designed for E26 (standard household), E12 (candelabra), or E14 (European) bases. The E17 base is the most common base for over-the-range microwaves and range hoods, but check your old bulb or appliance manual to confirm before ordering. Some newer LG microwaves use a 30W bulb instead of 40W — verify your wattage requirement as well.
Key Features
40-watt T8 appliance incandescent bulb — replaces burned-out interior lights in microwaves, range hoods, refrigerators, and select ovens
Standard E17 intermediate screw base — fits the most common appliance bulb socket
T8 shape: 1" (25mm) diameter × 2-3/8" (62mm) length — matches OEM bulb dimensions for clear cover fit
125V (works on AC 110-130V / 60Hz household power)
400 lumens of warm white light (~2800K) — matches the brightness and color of original incandescent OEM bulbs
Dimmable — compatible with microwave HIGH/LOW light settings without flicker
1000-hour rated lifetime — standard for appliance incandescent bulbs
Working temperature range: High Temp Resistance 300℃. — suitable for microwave and range hood heat environments
Replaces 8206232A, 1890433, AP4512653, WB25X10030, WB36X10003, W10321375, W10598935, 6912W1Z004B, and many additional cross-references
Multi-brand cross-compatibility: GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, Hotpoint, Corningware
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY replacement — installs in under 5 minutes
Product Specifications
Part Number
XPIBE1740
Common OEM Replacements
8206232A, WB25X10030, WB36X10003, 6912W1Z004B
Part Type
Appliance Light Bulb (Incandescent)
Condition
Aftermarket Replacement
Application
Microwave, Range Hood, Refrigerator, Oven, Appliance Lights
Wattage
40W
Voltage
125V (operates AC 110-130V / 60Hz)
Base Type
E17 Intermediate Screw Base
Bulb Shape
T8
Dimensions
1" (25mm) D x 2-3/8" (62mm) L
Brightness
280 lumens
Color Temperature
Warm White (~2800K)
Cover
Clear glass
Dimmable
Yes — compatible with HIGH/LOW microwave settings
Lifetime
over 2,000+
Working Temperature
High Temp Resistance 300℃.
Compatible Brands
GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, Hotpoint, Corningware
Installation Notes
⚠️ Let the Bulb Cool Completely Before Touching — Unplug Microwave Before replacing the bulb, unplug the microwave (or disconnect power at the breaker for hardwired range hoods) and allow the old bulb to cool completely — incandescent appliance bulbs run very hot, and the glass can stay hot for several minutes after the light is turned off. For an over-the-range microwave's interior light, the bulb is typically accessed through a small panel or by removing a screw-on cover inside the microwave cavity. For under-cabinet/exterior lights, access the bulb by removing the protective cover or vent grille on the bottom of the microwave or range hood. Unscrew the old bulb counterclockwise and dispose of it safely. Screw in the new XPIBE1740 bulb clockwise — hand-tight only, do not over-tighten. Avoid touching the glass envelope of the new bulb with bare fingers; skin oils on the glass can shorten bulb life. If you must touch the glass, wipe it down with a clean cloth before powering the appliance back on. Replace the cover, restore power, and confirm the light works. Tools needed: none for most models, or a small Phillips screwdriver if a panel/cover must be removed.
Frequently Asked Questions
How do I know if I need an E17, E26, or E12 base bulb?
The "E" number refers to the screw base diameter in millimeters. E17 (intermediate) is 17mm — the most common size for over-the-range microwave interior lights, range hood lights, and many appliance lights. E26 (medium/standard) is 26mm — typical household light bulbs (do NOT fit appliance sockets). E12 (candelabra) is 12mm — used for chandelier and decorative bulbs. E14 (European intermediate) is 14mm — common in Europe but rare in U.S. appliances. The XPIBE1740 is an E17 intermediate base. If your old bulb is noticeably smaller or larger than what you're holding, it's the wrong base — confirm by comparing dimensions or checking your appliance manual before ordering.
Can I use an LED bulb instead of this incandescent one?
In many appliances, yes — LED appliance bulbs with E17 intermediate bases are available and use significantly less power for similar brightness. However, LED bulbs sometimes have compatibility issues with the dimming/HIGH-LOW settings on microwaves, can flicker, or may not work with the appliance's lighting control circuit. The XPIBE1740 incandescent bulb is fully dimmable and a guaranteed direct match to the original appliance bulb's behavior. If you prefer LED for energy savings, confirm the LED is rated for appliance use, has an E17 base, and is dimmable for microwave applications before substituting.
My LG microwave's bulb says 30W — does this 40W bulb fit?
Physically, yes — both the 30W and 40W bulbs use the same E17 intermediate base and similar T8 shape. However, some LG microwave models specifically call for a 30W bulb (such as the 6912W1Z004B variant). Using a 40W bulb in a socket rated for 30W may cause the bulb to run hotter than designed, shortening its life or the surrounding socket components' life. Check your LG microwave's manual or the marking on the old bulb — if it specifies 30W, use a 30W bulb. The XPIBE1740 is 40W, suitable for the majority of microwaves that specify 40W bulbs.
Why do appliance bulbs burn out faster than regular household bulbs?
Appliance bulbs operate in harsher environments than typical household bulbs — high temperatures (microwaves and range hoods can hit 480°F nearby), heavy vibration from cooking appliances, repeated rapid on-off cycling, and frequent thermal shock from cooking steam. Even though they're rated for 1,000 hours of operation, real-world life in an appliance is often shorter than the same incandescent bulb in a household lamp. Buying multi-packs and replacing when one burns out is a common approach. Always allow the appliance to cool before swapping the bulb, and don't touch the new glass with bare fingers to maximize service life.
Is this an OEM or aftermarket part?
This is an aftermarket replacement bulb built to OEM-equivalent quality standards. It is not a branded GE, Whirlpool, or LG OEM bulb, but is manufactured to match the dimensions (T8, 1" × 2-3/8"), electrical specifications (40W, 125V, E17 base), brightness (400 lumens, warm white), and dimmable performance of the original appliance bulbs it replaces. Bulb spec compatibility (not brand) is what determines fit, so a properly specified aftermarket bulb performs identically to the OEM.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine Bosch 00617090 Microwave Waveguide Cover - Compatible with Bosch Microwaves
Product Description
Protect your microwave with the Genuine Bosch 00617090 Microwave Waveguide Cover. This OEM waveguide cover is designed for select Bosch built-in microwaves, shielding the magnetron from food splatter and moisture to ensure safe and efficient operation. Made of silicone-bonded mica and measuring approximately 4-1/8" x 2-5/8"", it prevents arcing, sparking, or microwave failure due to a damaged cover, delivering reliable performance as an authentic Bosch part.
Note: Includes one waveguide cover. Disconnect power before installation. Inspect waveguide channel for debris to ensure optimal performance.
Replaces part numbers: 00617090, 12014089, PD00053143, EAP9492671, AP5806321, PS9492671.
Compatibility:
Compatible with models including but not limited to:
Bosch: HBL5751UC/01, HBL8751UC/01, HMC80151UC/01, HMC87151UC/01, HMC80152UC/01, HMC80251UC/01, HMC80252UC/01, HMC87152UC/01, HMB50152UC/01, HMB50162UC/01, HMB57152UC/01
Thermador: (select models, verify compatibility)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Bosch built-in microwaves.
🛡️ Specifications: OEM waveguide cover, silicone-bonded mica, approximately 4-1/8" x 2-5/8".
💪 Reliable Performance: Authentic Bosch part ensures long-lasting durability.
🛠️ Easy Installation: Requires screwdriver; typically installed in 5–10 minutes.
🔥 Effective Fixes: Prevents arcing, sparking, or microwave failure due to damaged cover.
Product Specification
Part Number: Genuine Bosch 00617090
Component Type: Microwave waveguide cover
Material: Silicone-bonded mica
Mounting: Screw-mounted or clip-in (model-dependent)
Operating Conditions: Suitable for high-temperature microwave environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the microwave from the power source before installation.
Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your microwave running safely today!
Add to cart now for a reliable fix!
WB27X11213CM Microwave Fan Thermostat
Closes at 158°F, Opens at 104°F.
Fits GE Microwaves.
Replaces Part Numbers:WB27X11213, WB24X28950, WB27X10846, SE-7350-004, AP5791057, PS8754628.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
